Beruflich Dokumente
Kultur Dokumente
Australian Standard™
This is a free 4 page sample. Access the full version at http://infostore.saiglobal.com.
Australian Standard™
This is a free 4 page sample. Access the full version at http://infostore.saiglobal.com.
COPYRIGHT
© Standards Australia International
All rights are reserved. No part of this work may be reproduced or copied in any form or by
any means, electronic or mechanical, including photocopying, without the written
permission of the publisher.
Published by Standards Australia International Ltd
PO Box 1055, Strathfield, NSW 2135, Australia
ISBN 0 7337 1598 2
AS 3617 — 1997 2
PREFACE
This Standard was prepared by the Standards Australia Committee ME/54, Automotive
Components, in response to submissions made by the automotive brake repair industry.
This Standard incorporates Amendment 1 (May 2000). The changes required by the
Amendment are indicated in the text by a marginal bar and amendment number against
the clause, note, table, figure, or part thereof affected.
The industry recognizes that a Standard would —
(a) provide a safe procedure for assessing whether glazed or worn brake drums or brake
discs can be satisfactorily remachined;
(b) eliminate any unsafe practices, which can reduce mechanical stress, thermal mass
and mechanical safety; and
This is a free 4 page sample. Access the full version at http://infostore.saiglobal.com.
CONTENTS
Page
1 SCOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 OBJECTIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4 PROCEDURES FOR INSPECTION AND MEASUREMENT . . . . . . . . . . . . . 3
5 MEASUREMENT PARAMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6 MEASUREMENT EQUIPMENT AND TECHNIQUES . . . . . . . . . . . . . . . . . 5
7 REPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
This is a free preview. Purchase the entire publication at the link below: