Sie sind auf Seite 1von 20

ISSUE:2

catalogue

GENERATORS ENGINE DRIVE WELDERS ALTERNATORS PRESSURE WASHERS COMPACTORS POWER TROWELS ENGINE DRIVE PUMPS

HO DELUXE SERIES

HO DELUXE SERIES

P O W E R E D

HO2000

H03000

HO3500

HO5000
MODEL MAX WATTS CONT. WATTS DC OUTPUT NOISE LEVEL DBA - 10m HONDA OHV ENGINE FUEL TANK CAPACITY AVERAGE HOURS RUN @ 75% AUTO THROTTLE OFF AUTO THROTTLE ON* STARTING SYSTEM DIMENSIONS - LENGTH - WIDTH - HEIGHT 540 415 430 35 540 415 430 40 HO2000 1700 1400 12V-8.3A 64 GX120 4.0HP 11.0L 15hrs N/A RECOIL HO3000 2400 2000 12V-8.3A 66 GX160 5.5HP 11.0L 11hrs N/A RECOIL

HO6500
HO3500 2800 2300 12V-8.3A 67 GX200 6.5HP 11.0L 9hrs N/A RECOIL 540 415 430 45 HO5000 4500 3400 12V-8.3A 68 GX270 9.0HP 17.0L 10hrs 14hrs RECOIL 600 475 510 65 HO6500 5500 4400 12V-8.3A 69 GX340 11.0HP 17.0L 8hrs 12hrs RECOIL OR ELECTRIC* 650 470 520 77

HO7500
HO7500 6500 5200 12V-8.3A 69 GX390 13.0HP 17.0L 7hrs 10hrs HO8500 7000 6400 12V-8.3A 69 GX390 13.0HP 17.0L 7hrs 10hrs

RECOIL OR RECOIL OR ELECTRIC* ELECTRIC* 670 475 520 85 670 475 520 85

DRY WEIGHT (KG)

*Electric start units available at extra cost.

HO DELUXE SERIES - HONDA POWERED

Prime Powers Deluxe Range of Honda powered units provide product features that you want in portable power. Genuine Honda engines with long range fuel tanks, full control panels with a volt meter, 12V battery charging and power outlets PLUS the fuel saving automatic idle (on HO5000 upwards) makes this type of unit sought after by tradesman and home owners alike. The automatic idle function reduces the engine speed to an idle when there is no load (or current draw) on the unit, automatically increasing the engine speed when a load is introduced. This not only saves fuel but also produces less engine wear and reduces the overall noise of the unit.

Large capacity fuel tanks Full panel with outlets & voltmeter

12 Volt battery charging

Fuel tank protection rails

Circuit breaker Low profile engine Angle heavy duty anti-vibration mounts Automatic Idle To Reduce Fuel Consumption, Noise and Engine Wear (HO5000+)

P O W E R E D

E SAV EL! * FU

RO SERIES - ROBIN

RO DELUXE SERIES
ROBIN POWERED

RO2000

RO3000

RO3500

RO5000

Prime Power also offers its deluxe range of product with Robin petrol engines, with similar features to that of the HO Honda Powered deluxe series. Big fuel tanks, mufflers, control panels and sturdy frames make this set up great for those wanting long run times with quieter operation. Robin engines have traditionally been preferred by hire companies and construction contractors and have a reputation for keeping up with harsh treatment.

RO6500

RO7500

Robins large capacity air cleaners improve the efficiency of the engine and along with extra large muffler system, noise levels are greatly reduced. Electronic ignition system and overhead valve design ensure that there is improved fuel consumption. This in conjunction with the automatic idle feature on the RO6500 and RO7500 make this unit an economical unit to both run and service. Large Capacity Fuel Tanks Large Silenced Muffler Full Panel With Outlets & Voltmeter 12 Volt Battery Charging Automatic Idle To Reduce Fuel Consumption, Noise & Engine Wear
MODEL Max Watts Cont. Watts DC Output Noise Level DBA - 10m Robin OHV Engine Horsepower Fuel Tank Capacity (L) Average Hours Run @ 75% Auto Throttle Off Auto Throttle On* Starting System Dimensions - Length - Width - Height 545 415 465 36 545 415 465 39 545 415 465 43 600 475 510 66 RO2000 1700 1400 12V-8.3A 63 E12 4 11 15 NA RECOIL RO3000 2400 2000 12V-8.3A 65 E17 6 11 11 NA RECOIL RO3500 2800 2300 12V-8.3A 66 E21 6 11 9 NA RECOIL RO5000 4500 3400 12V-8.3A 67 E25 8.5 17 10 NA RECOIL RO6500 5500 4400 12V-8.3A 68 E36 11.5 17 8 12 RECOIL OR ELECTRIC 650 470 520 75 RO7500 6500 5200 12V-8.3A 68 E41 13.5 17 7 10 RECOIL OR ELECTRIC 670 475 520 85

Dry Weight (KG)

Electric start units available at extra cost.

PPY BASIC SERIES

PPY BASIC SERIES


YAMAHA POWERED

PPY3000

PPY6500

Prime Power offers Yamaha powered units in a similar configuration to that of the Robin and Honda deluxe units. Long range fuel tanks and quieter mufflers with a recognised engine make these units perfect for the camper or trade user alike.

PPY5000
MODEL Cont. Watts Amps Horsepower Starting Fuel Tank Capacity Approx Usage LPH Dry Weight Length Width Height
Electric start units available at extra cost.

PPY3000 2000 10 6 RECOIL 11 1.3 36 620 330 420


Fuel usage is approximate.

PPY5000 3400 13.5 10 RECOIL 15 2.1 40 700 520 560

PPY6500 4400 19 12 RECOIL 15 2.1 55 700 520 560

PH BASIC SERIES

PH BASIC SERIES

PH33

PH45

PH70E PH120E
* Also available in fuel tank base

Designed with our customers basic requirements in mind, Prime Powers Basic Range provides an economical alternative to that of the HO and RO Deluxe Series. A comprehensive full range of Honda powered units with industrial features that include easy start electronic ignition systems, cast iron cylinder sleeves, low oil protection, dual element air filters, double ball bearing crankshafts in a genuine Honda overhead valve engine. Basic Features
Standard fuel tanks, muffler and air filtration system Strong scoop or roll frame with anti vibration mounts Standard type power outlets Standard two year warranty Low oil level shutdowns All above units are rated @ 240v, 50Hz Electronic start model shown 3 phase alternators also available

MODEL PH Watts Continuous Amps Horsepower Starting Fuel Tank Capacity Approx Usage LPH 50Lt Fuel Tank Base Option Dry Weight (kg) Length Width Height

2.5

3.3

4.5

6.0 4800 25 11 R* 6.5 2.6 N 75 820 540 500

7.0 5600 29 13 R* 6.5 2.6 N 76 820 540 500

8.0 6400 33.5 13 R* 6.5 2.6 N 82 820 540 500

9.0 7200 37.0 15 R* 6.5 2.6 Y 90

10.0 8800 46 18 E

12.0 9600 50 20 E

15.0 12000 63 24 E 15/50 5.3 Y

2000 2640 3360 10 5.5 R 3.6 1 N 36 620 330 420 13.5 6.5 R 3.6 1.2 N 40 620 330 420 19 9 R 6.5 2.1 N 58 700 460 490

15/50 15/50 3.8 Y 4.2 Y

110/130 120/140 135/155 830/1042 570/550 700/700

P O W E R E D
6

R* - Electric start units available at extra cost. All units up to 8kva have recoil start, 10kva upward only electric start.

BUILDERS WORK SPECS

BUILDERS WORK SPECS


For those contractors who have the requirement for a serious generator that complies to work safe practices, Prime Power work spec generators are available in Honda engine options in all the basic set configurations. Builders Work Spec units include all the standard basic features along with the added benefits of Australian standard approved safety devices. Builders Work Specifications Vibration isolated IP66 weatherproof earth leakage Vibration isolated IP66 twin weather proof power outlets Heavy duty roll frame Anti vibration mounts Combination circuit breaker

PH60-BWS

P O W E R E D
* Non weather proof outlet also available

PH33-BWS#
# Scoop frame option shown.

AUTO STOP / START

The auto stop start controller is available for all Honda Basic electric start models and Yanmar diesel electric start portable units. For those who wish their Prime Power generator to either start remotely or via a multi function timer. Features include: Heat sensor on the muffler to operate the engine choke when required Time delay contactor to allow the engine to sufficiently warm up, which stops voltage fluctuations at initial start up and stop Safety shutdown in the event of either lack of fuel or no oil (in diesel only) to protect your engine Typical applications include: Remote applications: Bore pumps Lighting applications General situations where accessibility of the unit is restricted Solar power back up situations Also available with auto mains failure that enables the user to have it set up to auto start should the power fail and electricity be required and then turn itself off when the mains power is restored. 7

DIESEL SERIES

DIESEL SERIES
3000 RPM engine options available Honda Yanmar Prime Power 3000 RPM diesel units have either auto decompression or lever, with pressurised lubrication systems which allows easy starting and long engine life. Strong frames and anti vibration mounts ensure the unit can withstand rigorous handling at both construction and home building sites. Reliable brushless alternators ensure a stable power supply. Kubota also available
MODEL Watts Continuous KVA Amps Engine Horsepower Starting Fuel Tank Capacity Approx Hours Run Dry Weight Length Width Height 2.5 3.8 48 750 500 550 4.8 PYD22 1760 2.2 9 PYD50 3600 4.5 18.5 YANMAR 7 10 PYD70 5200 6.5 29 PHD60 4400 5.5 23 HONDA 9

PHD60E

RECOIL / ELECTRIC* 3.5 3.5 70 820 540 600 5.5 3.6 92 820 540 600 4.5 3.2 90 820 540 600 * Electric start units available at extra cost.

PYD50E

1500 RPM WATER COOLED DIESEL'S


Prime Power also offers an extensive range of slow speed diesel units, from 3kva up to 800kva. Features Heavy Duty Skid Base Compound regulated 4 pole 1500RPM alternators Electric start Battery cables & carrier Power Outlets (standard on 1 phase only) Options Galvanised base & guard Weather proof canopy Weather proof outlets single or three phase Shutdown protection low oil pressure / high water temp Run down time clock As above with pump pressure Pivot shutdown 8
Examples of 3 - 10kva machines
MODEL GKDC3E GKDC4E GKDC5E GKDC10E GKDC10E RATING 3 Kva 4 Kva 5 Kva 10 Kva 10 Kva PHASE 1 or 3 1 or 3 1 or 3 Three Single ENGINE RK 70 RK 95 RK 125 ER 1900 ER 1900

MODEL GYDC3E GYDC4E GYDC4.5E GYDC5E GYDC7.5E GYDC7.5E

RATING 3 Kva 4 Kva 4.5 Kva 5 Kva 7.5 Kva 7.5 Kva

PHASE 1 or 3 1 or 3 1 or 3 1 or 3 Three Single

ENGINE TF 70 TF 90 TF 110 TF 120 TF 160 TF 160

* Also Cummins & F. G. Wilson sets available.


Electric start units available at extra cost.

4 in 1 WORKSTATION

4 in 1 WORKSTATION
Prime Powers rugged construction 4 in 1 workstation is a portable workshop suitable for tradesmen, handymen and farmers alike. Gutsy welding performance matched with an economical air compressor ensures that most jobs can be finished while out on site. The auxiliary power also allows other hand tools to be utilised in an all in one Power/Welder/12v Battery charger compact package.

Both Recoil & Electric Start Options Available

Strong frame with the unit placed on rugged anti vibration mounts 10 stepped welding amp settings 200A welder 7kva AC auxiliary power with Honda petrol 10CFM air compressor 25lt air receiver which is removable from the frame 12v battery charger

# 5M & 10M WELDING KITS ARE ALSO AVAILABLE * DC WELDING UNIT ALSO AVAILABLE

P O W E R E D
MODEL Welding Current Max Amps Engine Horsepower Duty Cycle @ 180A/200A Duty Cycle @ 140A 240V Aux. Output Air Compressor Watts Continuous Battery Charging Starting Fuel Tank Capacity Approx Hours Run Dry Weight Length Width Height * Electric start units available at extra cost. 5600 Yes Recoil / Electric* 6.5 2.6 120 960 700 700 PWSH200AC AC 180 HONDA 13 60% 100% 7KVA PWSYD180AC AC 180 YANMAR 10 40% 100% 6KVA 10CFM / 25Lt Air Receiver 4800 Yes Recoil / Electric* 4.5 3.2 140

ENGINE DRIVEN WELDERS

ENGINE DRIVEN WELDER GENERATOR


Prime Power direct coupled engine drive welders offer excellent on site performance utilising both the stepped amperage welder and high auxiliary generator power. The units have a simple welding current adjustment to ensure optimum welding for each electrode type and welding job. Easy plug and play welding terminals allow good connection and easy storage of welding cables. All units are supplied with an auxiliary power outlet sufficient to operate most hand power tools and other workshop machinery.
Prime Power has engine drive welders available in both petrol and diesel engine options

HONDA
PWHV200 AC 200 HONDA 18 40% 100% 4KVA 3200 No 7KVA 5600 Yes 18 4 120 830 570 700 4KVA 3200 No DC

MODEL Welding Current Max Amps Engine Horsepower Duty Cycle @ 180A/200A Duty Cycle @ 140A 240V Aux. Output Watts Continuous Battery Charging Starting Fuel Tank Capacity Approx Hours Run Dry Weight Length Width Height *Electric start units available at extra cost. AC

PWH200 DC 180 13 60% 100% 7KVA 5600 Yes 6.5 2.6 80 820 540 500

Recoil / Electric*

Electric Only

DIESEL - HONDA - YANMAR


Model Welding Current Max Amps Engine Horsepower Duty Cycle @ 180A/200A Duty Cycle @ 140A 240V Aux. Output Watts Continuous Battery Charging Starting Fuel Tank Capacity Approx Hours Run Dry Weight Length Width Height 6KVA 4800 Y 5.5 3.6 90 820 540 500 4KVA 3200 N PWYD180 AC 180 10 DC 180 10 60% 100% 5KVA 4500 Y 4.5 3.2 88 4KVA 3200 N PWHD170 AC 170 9 DC 170 HONDA 9

YANMAR

Recoil / Electric*

Recoil / Electric*

3000 RPM air cooled alternator Fitted with thermal overload protection

10

*Electric start units available at extra cost.

MECCALTE

MECCALTE ALTERNATORS
Prime Power strongly supports the use of Meccalte alternators on many of its units. Meccalte offers clean power with 24 month warranty which is supported by a nation wide service network, to give you peace of mind with your Prime Power unit purchase.

3000 RPM Brushless Alternators


Capacitive Control Single Bearing and Bare Shaft 2 bearing Single phase available Three phase available The unique and light weight aluminium construction makes these machines easy to move or mount. Alternators to suit almost every tapered shaft engine are available. Units are supplied with a circuit breaker and power outlet if required. Residual current devices can easily be fitted at an additional cost upon request. 2 bearing alternator

2.5kva shown

7kva shown

1500 RPM 4 Pole Alternators


Brushless and Brush Machines AVR and Compound Control Single Bearing and Bare Shaft 2 bearing PTO Drive Single phase Three phase

These larger frame units range from 8kva to 2500kva and are made from the highest quality components to give you a strong, heavy duty, reliable machine. Meccalte alternators give you one of the most reliable, best performing and value for money alternator in the market.

The Meccalte Australasian office, in Adelaide South Australia, has been a long time supporter of Prime Power, with 20 plus years of continued involvement and co-operation. Prime Power and Meccalte are proud of this long association as it shows the desire to fully support past and future dealing with our Australian customers.

PTO Tractor Pack

11

BASIC GENERATORS

BASIC GENERATOR PRINCIPLES


2.5KVA
(2200W) POWER TOOLS UP TO 2200W*, LIGHTING, MICROWAVE OVEN, HEATING, TV, RADIO, TOASTER, BENCH GRINDER, EMERGENCY POWER OR HANDYMAN JOBS ALL OF THE ABOVE PLUS LARGER ELECTRIC MOTORS*, SMALL OVEN, ELECTRIC PUMPS*, LARGE FRIDGE, IRON, SMALL HEATER FAN, 9 ANGLE GRINDER, CIRCULAR SAW 9. ALL OF THE ABOVE PLUS CEMENT MIXER, LARGE GRINDERS, WASHING MACHINE, IRON, LARGE FRIDGE/FREEZER, MOST 1HP MOTORS*. ALL OF THE ABOVE, SMALL HOME BUILDING SITES, AIR CONDITIONER*, BRICK SAW, 10CFM AIR COMPRESSOR.

HO + RO 2000/3000 HO + RO 3500 HO + RO 5000 HO + RO 6500 HO + RO 7500

3.3KVA
(2600W)

4.5KVA
(4000W)

6.0KVA
(5500W)

7.0KVA
(6500W)

ALL OF THE ABOVE PLUS 140AMP WELDER*, LARGE MOTORS UP TO 2HP, LARGER HOME, MOST LARGER WORK SITES, 12CFM COMPRESSOR.

8.0KVA
(6800W)

ALL OF THE ABOVE PLUS BETTER MOTOR STARTER UP TO 2.5HP*, 14CFM COMPRESSOR.

9.0KVA
(7200W)

ALL OF THE ABOVE PLUS HEAVY DUTY EQUIPMENT, TWIN VACUUM CLEANERS, 160AMP WELDERS, 3HP MOTORS*, WOOL PRESS AND SHEARING PLANTS. ALL OF THE ABOVE PLUS EASY STARTER FOR ELECTRIC MOTORS*, BIG WORK SITES, SMALL SHOP FOR BACK UP, 180AMP WELDERS.

10KVA
(8000W)

11KVA
(9000W)

ALL OF THE ABOVE PLUS MOTORS UP TO 5HP*, 180>200 AMP WELDERS, WORKSHOPS.

12KVA
(10000W)

ALL OF THE ABOVE PLUS MOTORS UP TO 5HP*, 200>220 AMP WELDERS, CONSTRUCTION SITES AND LARGE SHOPS FOR BACK UP.

15KVA
(12000W)

ALL OF THE ABOVE PLUS BIG JOBS LIKE STARTING MULTIPLE MOTORS*.

KVA = WATTS# 1.0kva x 0.8 = WATTS WATTS = KVA# 1400W x 1.25 = KVA APPROX 4.2a per kva

To work out KVA required use start current then divide by 2, then divide x4.2 example: 42a 2 = 21a 21a 4.2 = 5KVA

* Drills and small saws must be brush type motors with no excess starting load, all other electric motors see your dealer for advice. Electronic welders often take more power KVA to correctly operate. Check with your welder manufacturer for their recommendation with this type of product. The above table should be used as a guide only. Product specifications vary from manufacturer to manufacturer. The above table should be used as a guide only. Product specifications vary from manufacturer. Prime Power accepts no responsibility for generators chosen purely using this basic guide. At all times you must refer to the manufacturer of the product to be operated by a generator for the correct sizing of machines.

Accessories available on Prime Power Units on request: 2 & 4 wheel kits Lifting eyes on roll over frames Earth leakage & weather proof outlets 18Lt & base mounted fuel tanks Auto stop/start & auto mains failure systems 12

# Will depend on power factor and type of alternator. All above calculations are a guide only. * Single Phase.

PRESSURE WASHER

PRESSURE WASHER
From driveways to mechanical equipment, Prime Power pressure washers provide the power to clean faster, and more efficiently, ensuring your property is kept in pristine condition. Pressure washers remove built up mould and grime, dirt and grease to restore surfaces to top condition within a fraction of the time compared to a normal hose and brush. Your Prime Power Pressure Washer can be either hooked up to your garden hose or to a water storage tank. The units are compact and light but strong in design. The frames are powder coated with fold down handles, with pneumatic wheels for easy manoeuvrability and storage.

Pressure Washer Model Peak Pressure (PSI/bar) Flow (LPM) Engine Hours run @ 75% load Max power output (hp) Fuel Tank Capacity (L) Gross Weight (kg) Dimension (mm)

PPW 2700 2700/183 11.5 Honda GX160 3.5 5.5 3.6 34 730 x 555 x 542

PPW 3000 3000/204 13.5 Honda GX 270 3.0 9.0 6.5 65 850 x 670 x 630

PPW 3600 3600 / 245 15.0 Honda GX 390 2.5 13.0 6.5 68 850 x 670 x 660

Specifications correct at time of printing but may change without notice. E&OE.
Electric start units available at extra cost.

P O W E R E D
13

COMPACTORS / POWER TROWEL

COMPACTORS
Ductile iron base plate provides better durability Open plate provides self cleaning Radius base plate for easy access to corners Centrally located lifting bar allows easy transport Sealed belt cover to prevent sand and soil entering

Technical Specifications Plate Size (cm) Dimension (cm)

PPC10 50 x 36 108 x 40 x 80 64 5600 10.5 20 40 450

PPC20 46 x 61 110 x 46 x 66 94 7000 19.8 30 45 770

PPC20

Weight (kg) Frequency (vpm) Centrifugal Force (kn) Compaction Depth (cm) Travel Speed (cm/s) Efficiency (m2/hr) Engine Engine Model Power (hp)

Air cooled, single cylinder Petrol, Honda GX160 5.5 5.5

PPC10

P O W E R E D

POWER TROWEL
Prime Powers Walk Behind Power Trowel powered by Honda is suitable for contractors wishing a superior finish to larger jobs.

Optional:

Finishing Blade

Walk Behind Power Trowel Low Maintenance and Long Life Design
Combination Blade
Technical Specifications Engine Type Power (hp) Weight (kg) Rotor Diameter (cm) Number of Blades Finish Blades (cm) Combination Blades (cm) Pans (cm) Dimension (cm) Power Trowel Petrol, Honda GX160 5.5 75 90 4 15 x 35 20 x 35 98 100 x 100 x 50

14

ENGINE DRIVEN PUMPS

FIRE FIGHTING
PP15ST This series has a quality wet end that is capable of larger flows than normal by using an open style impellor. Cast iron internals make this hard to beat. Fully replaceable suction and discharge ports, along with a full roll frame make this an excellent unit for the farm or rural home owner. Also available with an 11L fuel tank to give extended run time which is great if you want to move water from dam to dam, or tank to tank. Both Honda and Robin available in this option.

PP15-ST

PP15-LRT

PP15ST-R

PP15LRT-R

Model Engine Fuel Tank Capacity (L) Suction Size Discharge Size Max Head (M) Max Flow Rate (L/min) Pump Body Fluid Handling Weight (Kg)

PP15ST Honda GX160, 5.5hp, Recoil Start 3.6 1.5 1 x 1.5 / 2 x 1 50 500 Alloy Water 26

PP15LRT Honda GX160, 5.5hp, Recoil Start 11 1.5 1 x 1.5 / 2 x 1 50 500 Alloy Water 26

15

TRANSFER PUMPS

ENGINE DRIVE TRANSFER PUMPS


This range of product available from Prime Power allows maximum water transfer for dewatering or tank filling purposes

1 TRANSFER PUMP
The 1 transfer pump has a carry handle and is supplied with viton seals as standard, making it suitable for diesel fuel transfer. Self-priming Lightweight at 5.5kg Includes sturdy rubber mounted base and carry handle
Model Engine Fuel Tank Capacity (L) Suction Size Discharge Size Max Head (M) Max Flow Rate (L/min) Pump Body Fluid Handling Weight (Kg) PP010 Honda GX25, 1.1hp, Recoil Start, 4 stroke 0.65 1 1 36 130 Alloy Water 5.5

2, 3 & 4 TRANSFER PUMP


Prime Powers 2, 3 and 4 transfer pumps use either Honda or Robin engines, giving greater choice. Roll frames, couplings and fully repairable pump ends make this an excellent unit for farm work or other commercial applications.

Model Engine Fuel Tank Capacity (L) Suction Size Discharge Size Max Head (M) Max Flow Rate (L/min) Pump Body Fluid Handling Weight (Kg)

PP020 2.5 2 2 32 580 Alloy Water 23

PP030 3.6 3 3 32 1000 Alloy Water 27

PP040 6 4 4 31 2100 Alloy Water 43

Honda GX160, 5.5hp, Recoil Start, 4 stroke Honda GX160, 5.5hp, Recoil Start, 4 stroke Honda GX240, 8.0hp, Recoil Start, 4 stroke

16

TRASH PUMPS

ENGINE DRIVE TRASH PUMPS


Prime Powers range of rugged trash pumps are suitable for multiple uses, from construction sites to on farm applications.

Available in 2, 3 and 4, this range of engine drive pumps has quick release front bodies to give 100% access to the internals of the pump to clear any debris, removing the need to disconnect any pipe work. With flows from 680lpm up to 2200lpm there is sure to be a pump to suit. All pump units come with roll frames, non clog open impellors, high quality casings and are available in either Honda or Robin engine configurations.

PP030T

PP040T - Honda

Model Engine Fuel Tank Capacity (L) Suction Size Discharge Size Max Head (M) Max Flow Rate (L/min) Pump Body Fluid Handling Weight (Kg)

PP020T Honda GX160, 5.5hp, Recoil Start 3.6 2 2 27 600 Alloy Water 31

PP030T Honda GX240, 8.0hp, Recoil Start 6.5 3 3 30 1400 Alloy Water 52

PP040T Honda GX340, 11.0hp, Recoil Start 6.5 4 4 28 2200 Alloy Water 67.5

17

ENGINE DRIVE PUMPS

ENGINE DRIVE PUMPS - ROBIN


Prime Powers range of rugged Robin powered pumps are suitable for multiple uses, from construction sites to on farm applications.

Available in 2, 3 and 4, this range is available in Robin powered engines

Available in both Standard Transfer and Trash Pump configuration.

PP15ST-R

PP020-R

PP020T-R

ENGINE DRIVE PUMPS - HONDA


Also offered are Honda powered twin impellor, high head fire fighting pumps. Replaceable cast iron suction/discharge ports make this a robust pump all in a full roll over frame. Suitable for general farm use or town applications.

90 80 70 60 50 40 30 20 10 Hm 0 0 l/min 100 200 300 400 500 600

LTF40C2

18

CURVES

50 45 40

TRANSFER Pump Curves

Total Head (m)

35 30 25 20 15 10 5 0 PP010 PP020 PP030 PP040 300 600 900 1200 1500 1800 2100 2400

Pumping Capacity (L/min)

50 45 40

FIRE Pump Curves

Total Head (m)

35 30 25 20 15 10 5 PP15ST 0 100 200 300 400 500 600 700 800

Pumping Capacity (L/min)

50 45

TRASH Pump Curves

40 Total Head (m) 35 30 25 20 15 10 5 0 PP020T PP030T-2 PP040T 300 600 900 1200 1500 1800 2100 2400

Pumping Capacity (L/min)

19

POLY TRANSFER PUMPS

POLY TRANSFER PUMPS


2
PP20 -PL If you are looking for an engine drive pump to transfer liquids not normally pumped by traditional metal pumps, look no further. Prime Power has a 2 Poly Transfer Pump that has a flow of over 500lpm and a max head of 32m. Viton seals, stainless bolts all with a 5.5HP Honda are standard with this unit. The pump is supplied with an intergrated handle for easy lifting, with pump internals that handle various liquids for around the farm. Sea water and saline ground water are also able to be successfully moved.

PP80GPT - ECONOMY TRASH If you are wanting an economy type 3 trash pump then you will be happy with this trash pump from Prime Power. Using a 5.5HP engine, this unit is capable of moving 1000 lpm. Solids 25mm are able to be passed through its waterways allowing this pump to be used on construction sites needing dewatering or for use in irrigation. Roll frames and genuine Honda engines make this an excellent pump for any application needing a trash type pump

Whilst all endeavour is made in the preparation of this catalogue, specifications may change in keeping with our policy to continually improve our products. Prime Power does not warrant the accuracy or completeness in this publication and reserves the right to alter specifications without notice. To the extent permitted by law, Prime Power excludes all liability, including negligence, for any loss incurred in reliance with this publication. For warranty considerations the engine must go to an authorised warranty repair agent as prescribed by the actual brand of engine. For alternator considerations the unit must be returned to an authorised repair agent. Information of these agents is available on request. Warranty terms and conditions are also available on request, and will depend on the actual product purchased.

AVAILABLE FROM

59 Langford Street, POORAKA SA 5069 Phone: (08) 8349 6333

primepower@bigpond.com.au www.primepower.com.au Fax: (08) 8349 5226

Das könnte Ihnen auch gefallen