Beruflich Dokumente
Kultur Dokumente
4:1994
ISO/IEC 10164-4:1992
Information technology—
Open Systems Interconnection—
Systems management
Information technology—
Open Systems Interconnection—
Systems management
Part 4: Alarm reporting function
STANDARDS AUSTRALIA
1 The Crescent,
Homebush NSW 2140 Australia
PREFACE
This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee IT/1 on
Information Systems—Interconnection. It is identical with and has been reproduced from ISO/IEC 10164-4:1992,
Information technology—Open Systems Interconnection—Systems Management: Alarm reporting function.
This Standard is issued as a Joint Standard under the terms of the Active Cooperation Agreement between
Standards Australia and Standards New Zealand.
The objective of this Standard is to provide users of OSI network management with a model and the definition
of the services provided for the alarm reporting function.
This Standard is one of a series of Open Systems Interconnection (OSI) Standards which are currently under
development. Since OSI Standards are developmental, there may be some minor difficulties encountered in their
implementation. For this reason, Standards Australia will be providing, through the OSI Help Desk, a service to
coordinate and disseminate information concerning difficulties which are identified in using this Standard.
Users of this Standard are advised by Standards Australia and Standards New Zealand, under arrangements made
with ISO and IEC, as well as certain other Standards organizations, that the number of this Standard is not
reproduced on each page; its identity is shown only on the cover and title pages.
For the purpose of this Standard, the source text should be modified as follows:
(a) Terminology The words ‘this Australian/New Zealand Standard’ should replace the words ‘this International
Standard’ wherever they appear.
(b) Decimal marker Substitute a full point for a comma where it appears as a decimal marker.
(c) References The references to international Standards should be replaced by references, where appropriate,
to the following Australian or Joint Australian/New Zealand Standards:
ISO AS
8824 Information technology—Open Systems 3625 Information technology—Open Systems
In t er c on ne c t i o n— S p e ci f i c at i on of Interconnection—Specification of Abstract
Abstract Syntax Notation One (ASN.1) Syntax Notation One (ASN.1)
9545 Information technology—Open Systems 4021 Information technology—Open Systems
Interconnect i on— Appl i cat i on L ayer Int erco nnec t i on — App l i ca t i on l aye r
structure structure
9595 Information technology—Open Systems 3965 Information technology—Open Systems
Interconnection—Common management Interconnection—Common management
information service definition information service definition
AS/NZS
9646 Information technology—Open Systems 4103 Information technology—Open Systems
Interconnection—Conformance testing Int erconnection—Conformance t esti ng
methodology and framework methodology and framework
9646-1 Part 1: General concepts 4103.1 Part 1: General concepts
This is a free 9 page sample. Access the full version at http://infostore.saiglobal.com.
CONTENTS
Page
1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
4 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5 Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Generic definitions . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
8.1 Generic notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
8.2 Managed objects . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8.3 Compliance . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9 Service definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9.2 Alarm reporting service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
10 Functional units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
11 Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. . . . 12
11.1 Elements of procedure . . . . . . . . . . . . . . . . . . . . . . . .. .. .. . . . 12
11.2 Abstract syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. . . . 13
11.3 Negotiation of the alarm reporting functional unit . . . . .. .. . . . . . 16
v
Page
13 Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
13.1 General conformance class requirements . . . . . . . . . . . . . . . . . . 16
13.2 Dependent conformance class requirements . . . . . . . . . . . . . . . . 17
vi
NOTES
1
Part 4:
Alarm reporting function
1 Scope
This Recommendation International Standard defines a Systems Management Function that may be used by an
application process in a centralized or decentralized management environment to interact for the purpose of
This is a free 9 page sample. Access the full version at http://infostore.saiglobal.com.
systems management, as defined by CCITT Rec. X.700 ISO/IEC 7498-4. This Recommendation International
Standard defines a function which consists of generic definitions, services and functional units. This function is
positioned in the application layer of the OSI reference model (CCITT Rec. X.200 ISO 7498) and is defined
according to the model provided by ISO/IEC 9545. The role of systems management functions is described by
CCITT Rec. X.701 ISO/IEC 10040. The alarm notifications defined by this function provides information that
a manager may need to act upon pertaining to a system’s operational condition and quality of service.
— establishes a model that relates the service and generic defintions provided by this function to user
requirements;
— defines generic notification types and parameters documented in accordance with CCITT
Rec. X.722 ISO/IEC 10165-4;
— specifies the abstract syntax necessary to identify and negotiate the functional unit in protocol;
— specifies compliance requirements placed on other standards that make use of these generic
definitions;
— define the nature of any implementation intended to provide the Alarm Reporting function;
— specify the manner in which management is accomplished by the user of the Alarm Reporting
function;
— define the nature of any interactions which result in the use of the Alarm Reporting function;
— specify the services necessary for the establishment, normal and abnormal release of a
management association;
COPYRIGHT
This is a free preview. Purchase the entire publication at the link below: