Beruflich Dokumente
Kultur Dokumente
Specification Guide
Roadway
Contents
Profiler Profiler Profiler Profiler RX1. . . RX2. . . RX4. . . PA2 . PA31 PA4 . PA5 . ..... ..... ..... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 . .3 . .5 . .7 . .9 . 11 . 13
Profiler PA2
Housing: 360 low-copper die-cast aluminum alloy with stainless steel fasteners and optional photo-control eye or twistlock receptacle, which is located on the housing. Stainless steel compression latch secures the lens frame to housing for tool-less access to ballast and optical assembly. Finish: Thermoset polyester powdercoat, laboratory tested for superior weatherability and fade resistance. Optical Assembly: Type II (2), Type III (3), Type V (5) and Forward Throw (F) Cutoff: segmented specular internal reflector with horizontal lamp mounting. All distributions are 90 rotatable and interchangeable with a sealed optical chamber. Tempered flat glass lens. Lamping: H.I.D. Medium base ED17. Electrical Assembly: Ballast assemblies are mounted on a removable ballast tray with quick disconnects for tool-less replacement. Ballast: Factory pre-wired and tested, HPF core and coil. Regulated with power factors better than 90% (HPF), providing +/-10% input voltage regulation. Metal halide ballasts are capable of starting at 20F or 30C and HPS 40F or 40C. Certifications: ETL and cETL Listed. ISO 9001:2008. Height/Width: 6 (15 cm) x 30 7/8 (78 cm) Max. epa: (PA2S) 0.94 sq. ft. (PA2C) 1.10 sq. ft. Max. Weight: 38 lbs.
Straight Arm
5 3 4
Horizontal Slipfitter
1. Housing: Die-cast aluminum 2. Arm: Die-cast aluminum 3. Lens: Clear tempered flat glass 4. Optics: Specular aluminum reflector
5. Socket: Porcelain 4kv rated medium base (Lamp not included) 6. Ballast: Factory pre-wired and tested
Adjustable Arm
Ordering Guide
Ordering Example: PA2 C S I F 70S E V
OPTIONS (N) None (A) Air Filter **(B) Button Eye (F) Fusing (G) Poly. Shield ***(H) House-Side Shield (Q) Quartz Restrike (R) PE Receptacle (V) Tamper Resistant Latch ( ) ( ) ( ) ( ) ( ) ( ) ( )
ARM (AT) Adjustable Arm (C) Curved Arm (HT) Horiz. Slipfitter (S) Straight Arm ( ) ( ) ( ) ( ) ( ) ( ) ( )
MOUNTING (3) 3 O.D. Round Pole (4) 4 O.D. Round Pole FINISH (5) 5 O.D. Round Pole (A) Black *(6) 6 O.D. Round Pole (B) White (S) Square Pole (H) Bronze (W) Wall Mount (I) Gray ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )
*Only available with Straight Arm (S).
OPTICS (2) Type II (3) Type III (5) Type V (F) Forward Throw ( ) ( ) ( ) ( ) ( ) ( ) ( )
WATTAGE 70S = 70W HPS 100S = 100W HPS 150S = 150W HPS 50H = 50W MH 70H = 70W MH 100H = 100W MH 150H = 150W MH
VOLTAGE (E) 120V (F) 208V (G) 240V (H) 277V (K) 347V (J) 480V ( ) ( ) ( ) E, F, G, H, K E, F, G, H, K E, F, G, H, K E, F, G, H, K
**Not available in 480V (J). ***Not available with (5) or (F) optics.
For more information on the PA2, please visit www.hadco.com. Search by product name or number.
100 Craftway Drive, P.O. Box 128, Littlestown, PA 17340 Phone: 1-866-423-2658 Fax: 717-359-0618
Roadway
2
Profiler PA31
Housing: 360 low-copper die-cast aluminum alloy with stainless steel fasteners and optional photo-control eye or twistlock receptacle, which is located on the housing. Stainless steel compression latch secures the lens frame to housing for tool-less access to ballast and optical assembly. Finish: Thermoset polyester powdercoat, laboratory tested for superior weatherability and fade resistance.
Profiler PA31
2 1 5 3
1. Housing: Die-cast aluminum 2. Arm: Extruded aluminum 3. Lens: Clear tempered flat glass 4. Optics: Specular aluminum reflector
Roadway
Lamping: H.I.D. MH Mogul base ED28. 150W HPS Mogul base ED23.5 250W-400W HPS Mogul base E18. Electrical Assembly: Ballast assemblies are mounted on a removable ballast tray with quick disconnects for tool-less replacement.
Ballast: Factory pre-wired and tested, HPF core and coil. Regulated with power factors better than 90% (HPF), providing +/-10% input voltage regulation. Metal halide ballasts are capable of starting at 20F or 30C and HPS 40F or 40C. Certifications: ETL and cETL Listed. ISO 9001:2008. Height/Width: 8 1/8 (21 cm) 33 3/4 (86 cm) Max. epa: (PA31S) 1.36 sq. ft. (PA31C) 1.46 sq. ft. Max. Weight: 50 lbs.
Ordering Guide
Ordering Example: PA31 C W H F 150H K DF
OPTICS (1) Type I (2) Type II (3) Type III (4) Type IV (5) Type V (F) Forward Throw ( ) ( ) ( ) ( ) ( ) ( ) OPTIONS VOLTAGE (N) None (E) 120V ***(B) Button Eye (F) 208V (DF) Double Fusing (G) 240V **(H) House-Side Shield (H) 277V (Q) Quartz Restrike (K) 347V (R) PE Receptacle (J) 480V (SF) Single Fusing ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )
***Not available in 480V (J). Order pole machined for this fixture.
ARM *(AT) Adjustable Arm (C) Curved Arm PRODUCT *(HT) Horiz. Slipfitter CODE (S) Straight Arm PA31 ( ) PA31 ( ) PA31 ( ) PA31 ( ) PA31 ( ) PA31 ( )
MOUNTING (3) 3 O.D. Round Pole FINISH (4) 4 O.D. Round Pole (A) Black (5) 5 O.D. Round Pole (B) White (S) Square Pole (H) Bronze (W) Wall Mount (I) Gray ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )
*Do not specify mounting.
WATTAGE 150S = 150W HPS 250S = 250W HPS 400S = 400W HPS 150H = 150W MH 250H = 250W MH 320H = 320W MH
**Not available with Forward Throw (F), Type V (5), or Type I (1) optics.
For more information on the PA31, please visit www.hadco.com. Search by product name or number.
Shown: Profiler PA31S, Pole P295.
100 Craftway Drive, P.O. Box 128, Littlestown, PA 17340 Phone: 1-866-423-2658 Fax: 717-359-0618
Roadway
4
Optical Assembly: Type I (1), Type II (2), Type III (3), Type IV (4) Type V (5) and Forward Throw (F) Cutoff: segmented specular internal reflector with horizontal lamp mounting. All distributions are 90 rotatable and interchangeable with a sealed optical chamber. Tempered flat glass lens.
Profiler PA4
Housing: Die-cast aluminum alloy, with stainless steel latch and fasteners. Finish: Thermoset polyester powdercoat, laboratory tested for superior weatherability and fade resistance. Optical Assembly: Precision formed, segmented aluminum reflector with horizontal lamp mounting. Reflector is rotatable in 90 increments. This arc image duplicator system allows a full cutoff and attains a 6:1 spacing-to-mounting-height ratio, while maintaining a 3:1 average to minimum uniformity ratio for typical applications. Electrical Assembly: The ballast assembly and components are attached to the tool-less removable ballast tray assembly. All components are ETL recognized and are an integral part of the fixture. Socket is porcelain 4kv (position oriented) with nickel-plated screw shell and center contact. Lamping: PA4 Medium base: E17 Ballast: Factory wired and tested tool-less (HPF) ballast assembly with quick disconnects for easy maintenance. MH ballasts are capable of starting at -20F or -30C and HPS at -40F or-40C Certifications: ETL and cETL Listed. ISO 9001:2008. IP Rating: IP65: completely dust tight and sealed to withstand low pressure jets of water from any direction. Height/Width: 7.7 (19 cm) 23.2 (59 cm) Max. epa: 0.9 sq. ft. Max. Weight: 21 lbs.
Profiler PA4
1 6 2
1. Housing: Die-cast aluminum 2. Arm 3. Lens: Clear tempered flat glass 4. Optics: Specular aluminum reflector
4 3
Roadway
Ordering Guide
Ordering Example: PA4 S3 B I 70S E N
MOUNTING (R3) 3 O.D. Round Pole (R4) 4 or 5 O.D. Round Pole (S3) 3 Square Pole PRODUCT (S4) 4 or 5 Square Pole CODE (W) Wall Mount PA4 ( ) PA4 ( ) PA4 ( ) PA4 ( ) PA4 ( ) PA4 ( ) OPTICS (1) Type I (2) Type II (3) Type III (5) Type V (F) Forward Throw ( ) ( ) ( ) ( ) ( ) ( ) VOLTAGE (E) 120V (F) 208V (G) 240V (H) 277V (K) 347V (J) 480V ( ) ( ) ( ) ( ) ( ) ( ) OPTIONS (N) None (DF) Double Fusing (SF) Single Fusing *(H) House-Side Shield **(Q) Quartz Restrike (R) TLR Receptacle ( ) ( ) ( ) ( ) ( ) ( )
Order pole machined for this fixture.
WATTAGE 70S = 70W HPS 100S = 100W HPS 150S = 150W HPS 70H = 70W MH 100H = 100W MH 150H = 150W MH
**Consult factory when ordering Quartz Restrike (Q) with a 480V (J) ballast.
For more information on the PA4, please visit www.hadco.com. Search by product name or number.
100 Craftway Drive, P.O. Box 128, Littlestown, PA 17340 Phone: 1-866-423-2658 Fax: 717-359-0618
Roadway
6
Profiler PA5
Housing: Die-cast aluminum alloy, with stainless steel latch and fasteners. Finish: Thermoset polyester powdercoat, laboratory tested for superior weatherability and fade resistance. Optical Assembly: Precision formed, segmented aluminum reflector with horizontal lamp mounting. Reflector is rotatable in 90 increments. This arc image duplicator system allows a full cutoff and attains a 6:1 spacing-to-mounting-height ratio, while maintaining a 3:1 average to minimum uniformity ratio for typical applications. Electrical Assembly: The ballast assembly and components are attached to the tool-less removable ballast tray assembly. All components are ETL recognized and are an integral part of the fixture. Socket is porcelain 4kv (position oriented) with nickel-plated screw shell and center contact. Lamping: PA5 Mogul base: MH ED28 PA5 HPS 150w ED23.5 PA5 HPS 250-400w E18 Ballast: Factory wired and tested tool-less (HPF) ballast assembly with quick disconnects for easy maintenance. MH ballasts are capable of starting at -20F or -30C and HPS at -40F or-40C Certifications: ETL and cETL Listed. ISO 9001:2008. IP Rating: IP66: completely dust tight and sealed to withstand low pressure jets of water from any direction. Height/Width: 10.3 (26 cm) 30.9 (78 cm) Max. epa: 1.2 sq. ft. Max. Weight: 36 lbs.
Profiler PA5
1 6 2
1. Housing: Die-cast aluminum 2. Arm 3. Lens: Clear tempered flat glass 4. Optics: Specular aluminum reflector
4 3
Roadway
Ordering Guide
Ordering Example: PA5 S4 B 2 70S E N
OPTICS (1) Type I (2) Type II (3) Type III (5) Type V (F) Forward Throw ( ) ( ) ( ) ( ) ( ) ( ) VOLTAGE (E) 120V (F) 208V (G) 240V (H) 277V (K) 347V (J) 480V ( ) ( ) ( ) ( ) ( ) ( ) OPTIONS (N) None (DF) Double Fusing (SF) Single Fusing *(H) House-Side Shield **(Q) Quartz Restrike (R) TLR Receptacle ( ) ( ) ( ) ( ) ( ) ( )
Order pole machined for this fixture.
MOUNTING (R4) 4 or 5 O.D. Round Pole (R5) 5 or 6 O.D. Round Pole PRODUCT (S) Square Pole (4 or larger) CODE (W) Wall Mount PA5 ( ) PA5 ( ) PA5 ( ) PA5 ( ) PA5 ( ) PA5 ( )
WATTAGE 150S = 150W HPS 250S = 250W HPS 400S = 400W HPS 150H = 150W MH 250H = 250W MH 320H = 320W MH
**Consult factory when ordering Quartz Restrike (Q) with a 480V (J) ballast.
For more information on the PA5 please visit www.hadco.com. Search by product name or number.
100 Craftway Drive, P.O. Box 128, Littlestown, PA 17340 Phone: 1-866-423-2658 Fax: 717-359-0618
Roadway
8
RX1
Housing: Die-cast housing, lens frame and door. Low-copper, aluminum alloy. Unique thermal dissipating housing design. Wide angular fin design reduces the build up of dirt and improves thermal dissipation. Aesthetic look and sleek design looks similar to a cobra-head style luminaire with a lower EPA value. Tool-less access to wiring and driver compartment with removable door. Robotically applied lens and lens frame gasket seals. Finish: Thermoset polyester powdercoat, laboratory tested for superior weatherability and fade resistance. Textured finish. Mounting: The mounting detail accepts 1.5 O.D. to 2.5 O.D. arm/horizontal tenon. Clamp mounting system for increased reliability and safety. +5/-5 mounting with leveling bubble. Driver: Strategic placement of driver, lowering driver case temperature by up to 20C. Auto-sensing 120-277VAC, 347-480VAC, 50-60Hz input. Optics: Precision designed injection-molded acrylic optic plates. Multiple distribution options (Type 2, 3, 4, 5). LED Specifications: 80,000 hours with >L70 lumen maintenance @ 25C. Multiple color temperature options (3000K, 4000K, 5700K). Philips LEDGINE platform with 40, 64 or 80 LEDs. Certifications: ETL and cETL Listed. ISO 9001:2008. IP Rating: IP66 rated LED Optics Chamber and Driver. Length/Height/Width: 25.4 (64 cm) 4.8 (12 cm) 15.8 (40 cm) Max. epa: 0.54 sq. ft. Max. Weight: 19.5 lbs.
RX1
1 4 2 5 3
4. Driver: Auto-sensing, factory wired 5. Optics: Precision designed, injection molded.
1. Housing: Die-cast housing 2. Door: Tool-less access to wiring 3. Lens: Tempered glass lens
Roadway
Other: Large terminal block, directly in line with incoming power wires, accepts up to 6 gauge wire. 360 rotatable twist-lock photocell receptacle. 0-10V dimming capability within drivers and optional programmable dimming module. 10kV BIL surge suppression (optional). Philips Dynadimmer and wireless controls (optional).
Ordering Guide
Ordering Example: RX180 A 4 N A 5 R N S N
DIMMING4 (N) None (DA) 4 Hrs 25% (DB) 4 Hrs 50% (DC) 4 Hrs 75% (DD) 6 Hrs 25% (DE) 6 Hrs 50% (DF) 6 Hrs 75% (DG) 8 Hrs 25% DRIVE (DH) 8 Hrs 50% SURGE VOLTAGE CURRENT PHOTOCELL (DJ) 8 Hrs 75% SUPPRESSION HOUSE SIDE SHIELD (A) 120-277VAC (5) 530 mA (N) None (DZ) Custom5 (S) Standard <3kV (N) None (B) 347-480VAC3 (M) Multi Tap1 (R) Twist-Lock Receptacle (W) Wireless2 (A) 10kV BIL (H) House-Side Shield (A) (M) ( ) ( DZ, W, N ) ( ) ( ) ( ) (5) ( ) ( ) ( ) ( ) ( ) (5) ( ) ( ) ( ) ( )
3 2 (W) Wireless option consult factory. 347-480V not available with Dimming options (DA - DZ) 4 DA-DZ equal the reduction of energy. 5 (DZ) Custom option consult factory.
FINISH DISTRIBUTION COLOR (A) Black (2) Type II TEMP (CCT) (B) White (3) Type III (W) 3000K PRODUCT (H) Bronze (4) Type IV (N) 4000K CODE (I) Gray (5) Type V (C) 5700K RX140 ( ) ( ) ( ) RX164 ( ) ( ) ( ) RX180 ( ) ( ) ( )
1
No dimming or 347-480V, available with (M) Multi Tap driver only available with RX140 ships at 530mA.
For more information on the RX1, please visit www.hadco.com. Search by product name or number.
100 Craftway Drive, P.O. Box 128, Littlestown, PA 17340 Phone: 1-866-423-2658 Fax: 717-359-0618
10
Roadway
RX2
Housing: Die-cast housing, lens frame and door. Low-copper, aluminum alloy. Unique thermal dissipating housing design. Wide angular fin design reduces the build up of dirt and improves thermal dissipation. Aesthetic look and sleek design looks similar to a cobra-head style luminaire with a lower EPA value. Tool-less access to wiring and driver compartment with removable door. Robotically applied lens and lens frame gasket seals. Finish: Thermoset polyester powdercoat, laboratory tested for superior weatherability and fade resistance. Textured finish. Mounting: The mounting detail accepts 1.5 O.D. to 2.5 O.D. arm/horizontal tenon. Dual-clamp mounting system for increased reliability and safety. +5/-5 mounting with leveling bubble. Driver: Strategic placement of drivers, lowering driver case temperature by up to 20C. Auto-sensing 120-277VAC, 347480VAC, 50-60Hz input. Optics: Precision designed injection-molded acrylic optic plates. Multiple distribution options (Type 2, 3, 4, 5). LED Specifications: 80,000 hours with >L70 lumen maintenance @ 25C. Multiple color temperature options (3000K, 4000K, 5700K). Philips LEDGINE platform with 120 or 160 LEDs. Certifications: ETL and cETL Listed. ISO 9001:2008. IP Rating: IP66 rated LED Optics Chamber and Driver. Length/Height/Width: 40.2 (102 cm) 5.0 (13 cm) 15.8 (40 cm) Max. epa: 0.82 sq. ft. Max. Weight: 32 lbs.
RX2
1 4 2 5
4. Driver: Auto-sensing, factory wired 5. Optics: Precision designed, injection molded.
1. Housing: Die-cast housing 2. Door: Tool-less access to wiring 3. Lens: Tempered glass lens
Roadway
Other: Large terminal block, directly in line with incoming power wires, accepts up to 6 gauge wire. 360 rotatable twist-lock photocell receptacle. 0-10V dimming capability within drivers and optional programmable dimming module. 10kV BIL surge suppression (optional). Philips Dynadimmer and wireless controls (optional).
Ordering Guide
Ordering Example: RX2120 A 4 N A 5 R N S N
DIMMING3 (N) None (DA) 4 Hrs 25% (DB) 4 Hrs 50% (DC) 4 Hrs 75% (DD) 6 Hrs 25% (DE) 6 Hrs 50% (DF) 6 Hrs 75% (DG) 8 Hrs 25% (DH) 8 Hrs 50% SURGE PHOTOCELL (DJ) 8 Hrs 75% SUPPRESSION HOUSE SIDE SHIELD (N) None (DZ) Custom4 (S) Standard <3kV (N) None (R) Twist-Lock Receptacle (W) Wireless1 (A) 10kV BIL (H) House-Side Shield ( ) ( DZ, W, N ) ( ) ( ) ( ) ( ) ( ) ( )
2 1 (W) Wireless option consult factory. 347-480V not available with Dimming options (DA - DZ) 3 DA-DZ equal the reduction of energy. 4 (DZ) Custom option consult factory.
FINISH DISTRIBUTION COLOR (A) Black (2) Type II TEMP (CCT) (B) White (3) Type III (W) 3000K VOLTAGE PRODUCT (H) Bronze (4) Type IV (N) 4000K (A) 120-277VAC CODE (I) Gray (5) Type V (C) 5700K (B) 347-480VAC2 RX2120 ( ) ( ) ( ) (A) RX2160 ( ) ( ) ( ) ( )
For more information on the RX2, please visit www.hadco.com. Search by product name or number.
11
100 Craftway Drive, P.O. Box 128, Littlestown, PA 17340 Phone: 1-866-423-2658 Fax: 717-359-0618
12
Roadway
RX4
Housing: Sand-cast housing, lens frame and bottom. Low-copper, aluminum alloy. Wide angular fin design improves thermal dissipation. Unique style luminaire with low profile and EPA. Tool-less access to wiring and driver compartment with hinged bottom. High-temperature silicone rubber lens gasket seal. Finish: Thermoset polyester powdercoat, laboratory tested for superior weatherability and fade resistance. Textured finish. Mounting: The mounting detail accepts 1.0 O.D. to 2.6 O.D. (.75 to 2 NPS) arm/horizontal tenon. Dual-clamp mounting system for increased reliability and safety. Driver: Strategic placement keeps driver case temperature below the maximum rating. Auto-sensing 120-277VAC, 50-60Hz input. Multi-tap driver factory set for 350mA, 530mA or 700mA (see Ordering Guide). Optics: Precision designed injection-molded acrylic optic plates. Multiple distribution options (Type 2, 3, 4, 5). LED Specifications: Up to 100,000 hours with >L70 lumen maintenance @ 25C (see specification sheets for details). Multiple color temperature options (4000K or 5700K consult factory for 3000K). Philips LEDGINE platform with 24 or 40 LEDs. Certifications: ETL and cETL Listed. ISO 9001:2008. IP Rating: IP66 rated LED Optics Chamber and LED Driver. Length/Height/Width: no brim: 16.25 (41 cm) 7.0 (18 cm) 12.5 (32 cm) with brim: 20.0 (51 cm) 8.25 (21 cm) 20.07 (51 cm) Max. EPA: 0.30 sq. ft. (no brim) or 0.40 sq. ft. (with brim). Max. Weight: 14.50 lbs. (no brim) or 16.25 lbs. (with brim).
RX4
1 2 5
1. Housing: Sand-cast housing 2. Door: Tool-less access to wiring 3. Lens: Tempered glass lens
3
Roadway
14
4. Driver: Auto-sensing, factory wired 5. Optics: Precision designed, injection molded.
Other: Large terminal block, directly in line with incoming power wires, accepts up to 6 gauge wire. 360 rotatable twist-lock photo-cell receptacle. 10kV/10kA surge suppression (optional). Decorative Radial Wave Brim (optional). House Side Shield (optional).
Ordering Guide
Ordering Example: RX424 T1 A 2 N A 3 N S N N
FINISH DISTRIBUTION (A) Black (2) Type II COLOR MOUNTING (B) White (3) Type III TEMP (CCT)1 PRODUCT (T1) 2.60 - 2.25 tenon (H) Bronze (4) Type IV (N) 4000K VOLTAGE2 CODE (T2) 2.25 - 1.00 tenon (I) Gray (5) Type V (C) 5700K (A) 120-277VAC RX424 ( ) ( ) ( ) ( ) ( ) RX440 ( ) ( ) ( ) ( ) ( )
1
DRIVE CURRENT SURGE HOUSE (3) 350 mA PHOTOCELL SUPPRESSION SIDE SHIELD BRIM (5) 530 mA (N) None (S) Standard Built In <3kV (N) None (N) None (7) 700 mA (R) Twist-Lock Receptacle (A) Additional 10kV / 10kA (H) House Side Shield (B) Brim ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )
2
For more information on the RX4, please visit www.hadco.com. Search by product name or number.
13
100 Craftway Drive, P.O. Box 128, Littlestown, PA 17340 Phone: 1-866-423-2658 Fax: 717-359-0618
Photo Gallery
The following images illustrate the function and versatility of Philips Hadcos lighting fixtures, arms and poles while adding character to your environments setting.
Properly placed post top fixtures provide much more than embellishment. These fixtures also serve as markers to direct visitors to main points of entry.
Philips Hadco Teardrop fixtures offer an affordable alternative to the cobrahead traditionally used to light high traffic locations, while adding character.
Precise optics of Philips Hadcos Refractive Globes coupled with a range of styles and options like banner arms and customizable street graphics, offer an attractive presence both day and night.
A variety of Teardrops and Bollards allow you to create your own best combination a hard working, easy-tomaintain system that provides security while accenting your environments setting.
Architecturally pleasing fixtures are a welcomed addition to this roof-top application, adding safety and security to this public location.
Historical Main Street charm is preserved by using Philips Hadcos Refractive Globe fixtures fitted with the latest optical efficiencies.
15
2011 Philips Group All rights reserved. Certain products illustrated in this catalog may be protected by applicable patents and patent pending. Philips Hadco will aggressively defend all of its intellectual property. We reserve the right to change details of design, materials and finishes in any way that will not alter installed appearance or reduce function and performance.
Philips Hadco 100 Craftway Drive P.O. Box 128 Littlestown, PA 17340 Phone: 800-331-4185 Fax: 717-359-9289
www.hadco.com
PH-1077-1112-5K
Printed in U.S.A.