Beruflich Dokumente
Kultur Dokumente
Date: 24 August 2012 Designer: Solidworks Study name: Study 1 Analysis type: Thermal(Steady state) - 2D Simplification
Table of Contents
Description ............................................ 1 Assumptions .......................................... 2 Model Information ................................... 2 Study Properties ..................................... 3 Units ................................................... 3 Material Properties .................................. 3 Thermal Loads........................................ 4 Contact Information ................................. 4 Mesh Information .................................... 5 Sensor Details ........................................ 5 Study Results ......................................... 6 Conclusion ............................................ 6
Description
No Data
Simulation of thermal 2
Assumptions
Original Model
Model Analyzed
Model Information
Shell Bodies
Document Name and Reference Revolve1 Formulation Volumetric Properties Thickness:39.3701 in Weight:1301.21 lbf Volume:153.369 in^3 Mass:40.448 lb Density:0.263729lb/in^3 Document Path/Date Modified C:\Users\sony\thermal 2.SLDPRT Aug 24 20:01:53 2012
Thin
Simulation of thermal 2
Study Properties
Study name Analysis type Mesh type Solver type Solution type Contact resistance defined? Result folder Study 1 Thermal(Steady state) - 2D Simplification Planar 2D Mesh Direct sparse solver Steady state No SolidWorks document (C:\Users\sony)
Units
Unit system: Length/Displacement Temperature Angular velocity Pressure/Stress SI (MKS) mm Kelvin Rad/sec N/m^2
Material Properties
Model Reference Properties
Name: Model type: Default failure criterion: Thermal conductivity: Specific heat: Mass density: Curve Data:N/A Malleable Cast Iron Linear Elastic Isotropic Unknown 47 W/(m.K) 510 J/(kg.K) 7300 kg/m^3
Components
SurfaceBody 1(Revolve1)(Part2)
Simulation of thermal 2
Thermal Loads
Load name Load Image Load Details
Entities: Temperature: 1 edge(s) 573 Kelvin
Temperature1
Entities: Temperature:
Temperature2
Contact Information
No Data
Simulation of thermal 2
Mesh Information
Mesh type Mesher Used: Maximum element size Minimum element size Mesh Quality Planar 2D Mesh Curvature based mesh 0.708982 mm 0.0354491 mm High
Sensor Details
No Data
Simulation of thermal 2
Study Results
Name
Thermal1
Type
TEMP: Temperature
Min
373 Kelvin Node: 1
Max
573 Kelvin Node: 241
Conclusion
Simulation of thermal 2