Beruflich Dokumente
Kultur Dokumente
Introduction
This product series is a 4 channel embedded NVR with pentaplex functionality: the product will perform video audio live preview, recording, playback, remote access, and backup simultaneously. This advanced product series receives a high quality video stream that is transmitted digitally by the IP Camera (IPC). This video signal is encoded by the NVR and enabled for recording, viewing, configuring, and playback. This document mainly focuses on the installation and configuration of NVR LAN application system. With high performance audio & video, user-friendly GUI, and practical industrial designs; this series NVR is suitable for civil applications such as homes, stores, internet cafes, and small businesses in addition to mainstream security and surveillance applications.
Declaration
The content in this manual may be different from the product version you are using. If you experience any issue that is not mentioned in this manual, please contact our tech-support or product supplier. The software will be updated as necessary. Our company reserves the right to update without notice.
Target Reader
This manual is primarily intended for the following users: System planner Onsite tech-support and maintenance personnel Administrator for system installation Users for business operation
Conventions
Click: Refers to left-click with your mouse Double click: Refers to left-double-click with your mouse Right Click: Refers to right-click with your mouse Square brackets "[ ]" indicates the window name, menu name and data sheet, such as [Download]
Catalog
1 INTRODUCTION ............................................................................................................................ 2
1.1 Brief Introduction ...................................................................................................................................2 1.2 Main Functions and Features................................................................................................................2 1.3 Installation Instructions .........................................................................................................................2 1.4 Installation & Wiring .............................................................................................................................4
3 APPENDIX ................................................................................................................................... 25
3.1 SPECIFICATIONS ..............................................................................................................................25 3.2 System Default Values ........................................................................................................................25 3.3 Other Explain ......................................................................................................................................27
1 INTRODUCTION
1.1 Brief Introduction
This product series is a 4 channel embedded NVR with pentaplex functionality: the product will perform video audio live preview, recording, playback, remote access, and backup simultaneously. This advanced product series receives a high quality video stream that is transmitted digitally by the IP Camera (IPC). This video signal is encoded by the NVR and enabled for recording, viewing, configuring, and playback.
Table 0-2Rear Panel Description NO. Interface VGA Output 1 Alarm Input Alarm Output 2 3 4 Network Interface USB Interface RS485 power Description 1: DIN-15 4 Channel Input 1 Channel Output 1 : RJ45 10/100M 2: USB 2.0 1: Send & Receive Data, half-duplex interface (+ -) DC 12V
Remote Controller
Table 0- 3 Remote Controller Description NO. 1 2 3 Name Power Rec Discription Turn on/off the device Start/Stop recording Input numbers in the editable box One key channel selection in preview mode NO. (1-9) One key channel selection in playback mode, and enlarge the single-channel screen Apply for group use to choose channels above 10 in preview mode NO.10+ Apply for group use to choose channels above 10 in playback mode, and enlarge the single-channel screen NO.0 Input 0 in the editable box Backspace, delete input in the editable box Direction: Left Direction: Right Direction: Up Direction: Down OK 1) Press to confirm in menu mode 2) Shift key to choose recording type in recording schedule 3) Change the attributes of motion detection area while setting the areas of motion detection Switch from single screen and multi-screen in preview mode
4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21
Enter the main menu of setting interface Return or exit operations Backup video files Cancel alarm under alarm status One key for channel touring according to the touring settings; Press to pause and restart while touring 1. preview mode: pop out playback interface; 2. playback mode: shift between play and pause Playback mode: Stop play Playback mode: fast rewind Playback mode: fast forward
Wiring Instruction
Connect to the Power Supply
You should first make sure that the AC voltage connected with the NVR power adapter matches with the requirements. And then connect the power adapter to power input interface of NVR, the power indicator on the front panel will light on, indicating the power is connected right. Note: Please use the power adapter included in the package to avoid any damage to the equipment.
*Network Access
The device provides a standard RJ45 interface, which can easily access the LAN or WAN. During the network connection, you should provide sufficient bandwidth to ensure the fluency and clarity of the images transmitted over the network.
2 USE INSTRUCTION
2.1 Login
Starting Up
The Power LED on the front panel will light in red after complete the wiring. Press Power on/off button to start up device. The preview screen will then display. The login window will pop up by either pressing ESC button on front panel or remoter, or right clicking the mouse. Select user and the corresponding password to login.
Note1: Please allow the NVR up to two minutes to fully initialize. Note2: Modify password by selecting <Tool Bar><System><System Setting><Password Setting>.Set as indicated, new password will take effect instantly. Note3: Default password for admin is 111111. Default password for User is admin. Admin password can be restored to factory default by short connect the terminals on main board JP1 port. Admin user can modify the users password after login. The system supports up to 8 users, admin is the administrator user with all permissions, whose name cannot be deleted or changed. The admin user can add and delete all other users and the permissions corresponding. Note4: No Hard Drive will prompt if you start up the device without hard drive, and you can choose whether to enable a buzzer or not when no hard disk.
[Single]: Click
, full screen display the current chosen single channel video footage. Double click one
channel video footage to display this channel video footage on full screen, Double click once again to display four channel video footage. [Four]: Click [Playback]: Click , display all four channel video footage. , enter video playback interface. Refer to video playback setting (can set parameters
to choose different channel, and set on parameters of brightness, contrast and gray
to lock the NVR.The user must re-enter their username and password to un-lock the NVR. to restart the NVR. to shut down the device. to check and manage hard drive storage capacity and status.
2.4 Record
[Video Recording]: Click to set recording parameters.
Click
Select channel; Select the type of recording ( Schedule: scheduled recording/Alarm: alarm triggered recording); Select the time period you want to record; Select the start and end time for recording, and the total recording time.
10
2.5 Playback
[Playback]: Click to playback (time period, type, ICP).
Note: You can playback the specified IPC of a specific time point. Back: the previous page Forward: the next page First: the first page Last: the last page Search: You can search the video by the combination of time, type and channel. 1) Click 2) Click 3) Click 4) Click 5) Click 6) Click 7) Click to pause or play. to fast forward. to slow playback. to return to the last video. to go to the next video. to stop. to loop playback.
11
2.6 Backup
[Backup]: Click to backup the video file automatically.
Note: To generate a backup file of the specific time period of specified channel. Time: the specific time point need to backup First: the first page Back: the previous page Forward: the next page Last: the last page Backup: backup the file
12
1) Click
Steps:
(1) Enter the setting interface; (2) Select the alarm mode: normally-on/normally-off; (3) Set the specified channel to record; (4) Set the type of alarm (E-Mail or sound).
13
2)
Click
(1) The types of abnormal situation: 1. No Disk 2. Hard Disk Error 3. No Space.
Note: You should first click the small icon to close the small window, and then click the close icon to close the whole screen
14
1) Click
Choose automatic adding after enter the interface, or add device manually (only under the circumstance that there is no device to manage in the channel). You can only select one of the channels, and click AUTO to update the added device automatically. You can also delete the devices in the same interface by select the channel and click DELto automatically delete the devices.
2) Click
15
Enter the menu and chose the channel that you intend to adjust. When the Channel Title check-box is selected, the channel number will display on the channel screen. When the Time Title check-box is selected, the time will display on the channel screen. Enter video format >>choose video quality >>frame rate (according to the network speed of that very day)>>Video Audio (open or close Selectable)
1) Basic Setting
Click to enter the System Settings Menu.
16
After enter the interface, user can set on date format, time format, video format, resolution, storage, disk capacity (when the hard drive is full, it will automatically cover the previous recording files) and language.
Note: Please do not set the resolution higher than what your current VGA monitor will support, doing so may cause the NVR to stop transmitting video to the monitor. If the resolution is by accident set higher than what the current VGA monitor will support, try temporarily connecting the NVR to a larger VGA monitor and lowering the resolution back to default setting.
2) Network Parameter
Click to set the network parameters.
17
First input current IP address, Net mask, Gateway, Master DNS, Slave DNS, MAC Address, Web Port, Video Port and Phone Port.
3) Channel Loop
Click to configure channel loop settings.
Note: Channel loop settings must be over 5 seconds. Click Single 1: channel 1 for loop play, 2: channel 2 for loop play 3: channel 3 for loop play 4: channel 4 for loop play Click Four: Loop play from channel 1 to channel 4
18
4) Advanced Setting
Click for advanced setting.
Note: Display the hard drive capacity in each channel, and format the hard drive.
19
6) User Management
Click for user management setting.
Note: Display channel username 1) Click to enter Modify Password: User can modify the username and password (first type in the old password, and then type in the new password, last confirm the new password)
20
2)
Click Add User to create new users (type in new username and password)
3)
Click Delete User to delete users (need to type in the password first before next operation)
4)
Click
5)
Click
21
the specified time). Atention: The system will reboot during system maintenance
22
1)
Click
23
Note: user can choose LOG type and define the specific time (last LOG/next LOG/ the first page and the last page)
2)
Click
24
3 APPENDIX
3.1 SPECIFICATIONS
Model Video System Operation System Video Output Display Frame Rate Display Resolution Recording Frame Rate Record Resolution Record Mode Playback Mode Network Function Network Interface Net Protocol 3G Mobile Mobile Function Alarm Mode Sensor/Alarm HDD Interface USB Interface Backup Remote Control Remote Access Power Supply Dimension Gross Weight ZMD-NV-SBN4 -4 CH Standalone NVR NTSC Linux Based VGA 120fps @VGA 800600@60Hz,1024768@60Hz,12801024@60Hz 120fps @VGA 120fps @VGA Manual / Time Scheduled / Alarm Triggered Normal Play /Fast Forward /Rewind /Slow Play Real-time Preview, Record, Playback, Download, NVR Setting, Upgrade, Mobile & Email Function RJ45, 10M/100M TCP/IP, PPPoE, DHCP,DDNS Support mobile phone based on iPhone 4.3 up, Android 2.2 up 4 Channel Viewer / Channel Switch Trigger Record, Email Alert, Audio Output, Alarm output 4 CH Sensor Inputs / 1 CH Alarm Output 1 SATA HD, Support up to 2TB USB 2.0, USB Backup, Mouse USB Flash Disk, Removable HDD IR Remote Control LAN or Internet Browsing DC12V, 3A 8.66"x8.07"x1.57" 5.65lbs
25
Items LANGUAGE Video Standard VGA Setting System Settings Time Format Time Setting
Options in Menu Simplified Chinese,English PAL,NTSC,SECAM 800600@60Hz ,1024768@60 Hz,12801024@60 Hz 12 hours, 24 hours No menu options, click directly into sub-menu settings OFF/ON, choose directly into sub-menu settings No menu options, click directly into sub-menu settings ON/OFF No menu options, click directly into sub-menu settings No menu options, click directly into sub-menu settings No menu options for current user, click directly into sub-menu settings No menu options, click directly into sub-menu settings brightness, contrast, & saturation: 128\46\128\64 Static IP,Dynamic IP, PPPoE No menu options, click directly into settings No menu options, click directly into settings No menu options, click directly into settings No menu options, click directly into settings
Default English Auto adjust 12801024@60Hz 24 hours Year-month-day hour : minute PM OFF Password: 111111 User:admin ON
DST
Delete User
Authority Management
Record Settings
Schedule
24 hours recording
Color Setting
3/35/127
26
Media Port
No menu options, click directly into settings ON/OFF; No menu options, click directly into settings No menu options, display IP address when PPPoE dial-up successfully No menu options, click directly into settings No menu options, click directly into settings No menu options, check the settings directly No menu options, click directly into settings Click directly into submenu settings Click directly into submenu settings
8000
PPPoE Setting
OFF
PPPoE Address
0.0.0.0
DNS Address Dynamic Domain Name Email Setting Mobile Port UPnP Setting FTP Setting
202.96.134.133 OFF
27