Beruflich Dokumente
Kultur Dokumente
com
Document: Datasheet
Date: 17-Jul-11
Model #: 1156
Features
Simple to use Analog output for each axis +5V operation @1ma current High Sensitivity (800mV/g @ 1.5g) Selectable Sensitivity (+- 1.5g, +- 6g) 0g detect for free fall detection Robust design, high shock survivability Low Cost
Applications
3D Gaming: Tilt and Motion Sensing, Event Recorder HDD MP3 Player: Freefall Detection Laptop PC: Freefall Detection, Anti-Theft Cell Phone: Image Stability, Text Scroll, Motion Dialing, E-Compass Pedometer: Motion Sensing / PDA: Text Scroll Navigation and Dead Reckoning: E-Compass Tilt Compensation Robotics: Motion Sensing
Specifications
Board Supply Voltage +5 V DC Board has regulator IC to convert +5V to 3.3V DC since sensor IC operates on 3.3V only
The device can measure both + and acceleration. With no input acceleration the output is at midsupply. For positive acceleration the output will increase above 1.65V For negative acceleration, the output will decrease below 1.65V
0g Detect
Active High 3V signal on free fall The sensor offers a 0g-Detect feature that provides a logic high signal when all three axes are at 0g. This feature enables the application of Linear Freefall protection if the signal is connected to an interrupt pin or a poled I/O pin on a microcontroller.
Sensitivity Select
Selection between two sensitivities can be made by closing or opening the two pad contact on board. You can close the contact by soldering the two pads together. Factory supplied is open=1.5g (800mV/g) setting which is maximum sensitivity which should be suitable for most applications.
Pad Open (Default Supplied) Close (Shorted) Sensitivity 1.5g 6g Output Voltage 800mV per g 200mV per g
Sunrom Technologies
Visit us at www.sunrom.com
Sunrom Technologies
Visit us at www.sunrom.com