Sie sind auf Seite 1von 2

Quick Selection Guide

Portable Indoor Air Quality Instruments


Critical Environment Technologies Canada Inc. Unit 145, 7391 Vantage Way, Delta, BC, V4G 1M3, Canada Toll Free: +1.877.940.8741 Tel: +1.604.940.8741 Fax: +1.604.940.8745

YESAIR

www.critical-environment.com

YES IMS YES Plus LGA


Critical Environment Technologies Canada Inc. Unit 145, 7391 Vantage Way Delta, BC, V4G 1M3, Canada www.critical-environment.com TF: +1.877.940.8741 T: +1.604.940.8741 F: +1.604.940.8745 February 2012 | Data subject to change without notice.

February 2012 Critical Environment Technologies Canada Inc. All rights reserved. Data in this publication may change without notice.

QUICK SELECTION GUIDE

Portable Indoor Air Quality (IAQ) Instruments


Portable Indoor Air Quality (IAQ) Instruments

YESAIR
Features Available
Relative Humidity Sensor Temperature Sensor YESDUST Compatible Electrochemical Catalytic Infrared PID Yes Yes Yes Yes Yes Yes Yes Alkaline, AA x 3 Rechargeable NiMH battery pack: 8 hours of continuous operation time (dependent upon the sensor array installed) c/w plug-in battery charger / wall adapter (6 VDC) Backlit, multi-line alphanumeric LCD display sensor dependent Standard: Internal, automatic sample pump for active sampling of target environment Optional: Diffusion for quick, direct reading. Memory Warm-Up Time Operating Temperature Humidity CE Removable Internal SD Flash Card Approximately 3 minutes 5 C to 50 C (41 F to 122 F) 0% to 95% RH non-condensing Yes

YES Plus LGA


Yes Yes Yes Yes Yes Yes Yes Rechargeable NiMH battery pack: 18 - 24 hours of continuous operation time (dependent upon the sensor array installed) c/w plug-in battery charger / wall adapter 12 VDC (100 - 240 VAC; 50 - 60 Hz) Back-lit, multi-line LCD alphanumeric display sensor dependent Internal, automatic sample pump for active sampling of target environment Removable Internal SD Flash Card Approximately 3 minutes 5 C to 50 C (41 F to 122 F) 0% to 95% RH non-condensing No

YES IMS
Yes Yes Yes Yes Yes Yes Yes

Sensor Technology

Power Requirement

Desktop version: 6 V wall adapter Wall Mount version: 24 VAC or DC

Electrical

Display Resolution Sampling

Back-lit, multi-line LCD alphanumeric display sensor dependent Diffusion Removable Internal SD Flash Card tbd 5 C to 50 C (41 F to 122 F) 0% to 99% RH non-condensing Pending

Environmental Certifications

Note: All CETCIs instruments consist of RoHS compliant circuit boards.


February 2012 Critical Environment Technologies Canada Inc. | Data subject to change without notice. | Toll Free: +1.877.940.8741 | T: +1.604.940.8741 | F: +1.604.940.8745 | E: marketing@cetci.com | www.critical-environment.com

Das könnte Ihnen auch gefallen