Beruflich Dokumente
Kultur Dokumente
Product Specification
Title
BUYER MODEL General
*When you obtain standard approval, please use the above model name without suffix SIGNATURE DATE SIGNATURE DATE
APPROVED BY /
Please return 1 copy for your confirmation with your signature and comments.
Ver. 1.0 Aug. 05, 2005
1 / 32
Product Specification
CONTENTS
Number
COVER CONTENTS RECORD OF REVISIONS 1 2 3 3-1 3-2 3-3 3-4 3-5 3-6 4 5 6 7 7-1 7-2 8 8-1 8-2 9 9-1 9-2 9-3 9-4 9-5 9-6 GENERAL DESCRIPTION ABSOLUTE MAXIMUM RATINGS ELECTRICAL SPECIFICATIONS ELECTRICAL CHARACTERISTICS INTERFACE CONNECTIONS SIGNAL TIMING SPECIFICATIONS SIGNAL TIMING WAVEFORMS COLOR DATA REFERENCE POWER SEQUENCE OPTICAL SPECIFICATIONS MECHANICAL CHARACTERISTICS RELIABILITY INTERNATIONAL STANDARDS SAFETY EMC PACKING DESIGNATION OF LOT MARK PACKING FORM PRECAUTIONS MOUNTING PRECAUTIONS OPERATING PRECAUTIONS ELECTROSTATIC DISCHARGE CONTROL PRECAUTIONS FOR STRONG LIGHT EXPOSURE STORAGE HANDLING PRECAUTIONS FOR PROTECTION FILM
ITEM
Page
1 2 3 4 5 6 6 8 12 13 14 15 17 21 24 25 25 25 26 26 26 27 27 27 28 28 28 28
Ver. 1.0
2 / 32
Product Specification
RECORD OF REVISIONS
Revision No.
1.0
Revision Date
Aug.05.2005
Page
Preliminary Specification
Description
Ver. 1.0
3 / 32
Product Specification
1. General Description
The LC370WU1 is a Color Active Matrix Liquid Crystal Display with an integral External Electrode Fluorescent Lamp(EEFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive display type which is operating in the normally black mode. It has a 37.01 inch diagonally measured active display area with WUXGA resolution (1080 vertical by 1920 horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arrayed in vertical stripes. Gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. Therefore, it can present a palette of more than 16.7M(true) colors. It has been designed to apply the 8-bit 2-port LVDS interface. It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut, high color depth and fast response time are important.
SDRAM MEM CTRL RGB SCL EEPROM SDA
G1
Mini-LVDS(RGB)
Timing Controller
[LVDS Rx + DCR + ODC integrated]
AI_Enable VBR_OUT
VBR for AI +24.0V GND Status 2pin x 1CNs (High) 2pin x 1CNs (High)
General Features
Active Screen Size Outline Dimension Pixel Pitch Pixel Format Color Depth Luminance, White Viewing Angle (CR>10) Power Consumption Weight Display Mode Surface Treatment Ver. 1.0 37 inches(940.091mm) diagonal 877(H) x 516.8 (V) x 55.5 mm(D) (Typ.) 0.42675 mm x 0.42675 mm 1920 horiz. by 1080 vert. Pixels, RGB stripe arrangement 8-bit, 16.7 M colors 500 cd/m2 (Center 1point ,Typ.) Viewing angle free ( R/L 178 (Typ.), U/D 178 (Typ.)) (TW-IPS Tech. Applied) Total (131.72) W (Typ.) (Logic= 6.72W, Inverter= 125W [IBL= 105mA] ) 10,500 g (Typ.) Transmissive mode, Normally black Hard coating(3H), Anti-glare treatment of the front polarizer Aug. 05, 2005 4 / 32
Product Specification
Parameter
Power Input Voltage LCM Backlight inverter
Symbol
VLCD VBL VON/OFF VBr TOP TST HOP HST
Max
+14.0 +27.0 +5.25 +5.0 +40 +50 90 90
Unit
VDC VDC VDC VDC
Remark
at 25 2 C When Operating
ON/OFF Control Voltage Brightness Control Voltage Operating Temperature Storage Temperature Operating Ambient Humidity Storage Humidity
C C
Note 1 %RH %RH
Note : 1. Temperature and relative humidity range are shown in the figure below. Wet bulb temperature should be 39 C Max. and no condensation of water.
90% 60 60% Humidity [(%)RH] 50 Wet Bulb Temperature [C] 40 40% 30 20 10 0 10% 10 20 30 40 50 60 70 80 Storage
Operation
-20
Ver. 1.0
5 / 32
Product Specification
Unit
Note
560
200
730
Note : 1. The specified current and power consumption are under the VLCD=12.0V, 25 2C, fV=60Hz condition whereas mosaic pattern(8 x 6) is displayed and fV is the frame frequency. 2. The current is specified at the maximum current pattern. 3. The duration of rush current is about 5ms and rising time of power input is 1ms (min.).
Mosaic Pattern(8 x 6)
Ver. 1.0
6 / 32
Product Specification
Symbol
Unit
Note
Lamp :
Life Time 50,000 60,000 Hrs 4
Notes : 1. Electrical characteristics are determined after the unit has been ON and stable for approximately 120 minutes at 252C The specified current and power consumption are under the typical supply Input voltage, it is total power consumption. The ripple voltage of the power supply input voltage is under 0.2 Vp-p. LPL recommend Input Voltage is 24.0V 5%. 2. It is not inrush current, it is the current at turn on time. 3. Brightness Control.
This VBR Voltage control brightness. VBR Voltage
3.3V 0V
4. The life is determined as the time at which luminance of the lamp is 50% compared to that of initial value at the typical lamp current on condition of continuous operating at 25 2C. Specified value is when lamp is aligned horizontally.
Ver. 1.0 Aug. 05, 2005 7 / 32
Product Specification
Symbol
GND Reserved (NC) Reserved (NC) Reserved (NC) Reserved (NC) Reserved (NC) LVDS select VBR_EXT VBR_OUT DCR Enable GND RO0N RO0P RO1N RO1P RO2N RO2N GND ROCLKN ROCLKP GND RO3N RO3P Reserved (NC) Reserved (NC) Reserved
Description
Ground No connection No connection No connection No connection No connection Select LVDS Data format External VBR VBR output H=Enable, L=Disable Ground FIRST CHANNEL 0FIRST CHANNEL 0+ FIRST CHANNEL 1FIRST CHANNEL 1+ FIRST CHANNEL 2FIRST CHANNEL 2+ Ground FIRST CLOCK CHANNEL CFIRST CLOCK CHANNEL C+ Ground FIRST CHANNEL 3FIRST CHANNEL 3+ No connection No connection No connection or GND
No
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 -
Symbol
Reserved RE0N RE0P RE1N RE1P RE2N RE2P GND RECLKN RECLKP GND RE3N RE3P Reserved (NC) Reserved (NC) Reserved Reserved GND GND GND NC
Description
No connection or GND SECOND CHANNEL 0SECOND CHANNEL 0+ SECOND CHANNEL 1SECOND CHANNEL 1+ SECOND CHANNEL 2SEC`OND CHANNEL 2+ Ground SECOND CLOCK CHANNEL CSECOND CLOCK CHANNEL C+ Ground SECOND CHANNEL 3SECOND CHANNEL 3+ No connection No connection No connection or GND No connection or GND Ground Ground Ground No connection Power Supply +12.0V Power Supply +12.0V Power Supply +12.0V Power Supply +12.0V -
Notes : 1. All GND(ground) pins should be connected together to the LCD modules metal frame. 2. If DCR function should be enable(H), 10th pin must be connected to serial resistor which value is under 1k ohm. 3. All VLCD (power input) pins should be connected together. 4. All Input levels of LVDS signals are based on the IEA 664 Standard.
Ver. 1.0
8 / 32
Product Specification
Table 4. Required signal assignment for Flat Link (Thine : THC63LVD823) Transmitter(Pin7=L)
THC63LVD823
or Compatible 53/81 54/82 57/83 58/84 59/85 60/86 51/79 52/80 63/91 64/92 65/93 66/94 67/95 68/96 61/89 62/90 73/99 74/100 75/1 76/2 77/5 78/6 69/97 70/98 7 8 9 10
FI-R51S-HF
12 13 14 15 16 17 19 20 22 23 28 29 30 31 32 33 35 36 38 39
Timing Controller
RxO0RxO0+ RxO1RxO1+ RxO2RxO2+ RxOCLKRxOCLK+ RxO3RxO3+
49 TA1-TA1+ 48 47 TB1-/TB1+ 46 44 TC1-/TC1+ 43 TCLK1- 42 TCLK1+ 41 40 TD1-/TD1+ 39 37 TA2-/TA2+ 36 35 TB2-/TB2+ 34 32 TC2-/TC2+ 31 TCLK2- 30 TCLK2+ 29 28 TD2-/TD2+ 27
7 10
Ground
LCD Module
Note: 1. The LCD module uses a 100 Ohm() resistor between positive and negative lines of each receiver input. 2. Refer to LVDS transmitter data sheet for detail descriptions. (THC63LVD823 or Compatible) 3. 7 means MSB and 0 means LSB at R,G,B pixel data.
Ver. 1.0 Aug. 05, 2005 9 / 32
Product Specification
Table 5. Required signal assignment for Flat Link (Thine : THC63LVD823) Transmitter(Pin7=H)
THC63LVD823
or Compatible 51/79 52/80 53/81 54/82 57/83 58/84 59/85 60/86 61/89 62/90 63/91 64/92 65/93 66/94 67/95 68/96 69/97 70/98 73/99 74/100 75/1 76/2 77/5 78/6 7 8 9 10 TA1+/TA1- 48 49 TB1+/TB1- 46 47 TC1+/TC1- 43 44 41 42 39 TD1+/TD140 TCLK1+ TCLK136 37 34 TB2+/TB235 31 TC2+/TC232 29 TCLK2+ 30 TCLK2- 27 28 TD2+/TD2 TA2+/TA2-
FI-R51S-HF
12 13 14 15 16 17 19 20 22 23 28 29 30 31 32 33 35 36 38 39 7 10
Timing Controller
Vcc
LCD Module
Note: 1. The LCD module uses a 100 Ohm() resistor between positive and negative lines of each receiver input. 2. Refer to LVDS transmitter data sheet for detail descriptions. (THC63LVD823 or Compatible) 3. 7 means MSB and 0 means LSB at R,G,B pixel data.
Ver. 1.0 Aug. 05, 2005 10 / 32
Product Specification
3-2-2. Backlight Inverter Input Connector -Inverter Connector : S12B-PHA-SM3(manufactured by JST) -Mating Connector : PHR-12 Status Connector -Inverter Connector : 20022WR-02A00(manufactured by Yeon Ho co., Korea) -Mating Connector : 20022HR-02S00(manufactured by Yeon Ho co., Korea) Table 6. INVERTER CONNECTOR PIN CONFIGULATION Pin No 1 2 3 4 5 6 7 8 9 10 11 12 Symbol
VBL VBL VBL VBL VBL GND GND GND GND GND VBR On/Off
Description
Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V Power Supply +24.0V POWER GND POWER GND POWER GND POWER GND POWER GND 0V ~ 3.3V 0V ~ 5.0V
Master
VBL VBL VBL VBL VBL GND GND GND GND GND VBR On/Off
Slave
VBL VBL VBL VBL VBL GND GND GND GND GND Dont care Dont care
Note
2 3
Component side
Status connector
1 2 1 2 3
Input connector
11 12
PCB
Top
Bottom Note : 1. GND should be connected to the LCD modules metal frame. 2. Minimum Brightness : VBR = 0.0V Maximum Brightness : VBR = 3.3V 3. VON : 3.0 ~ 5.0V VOFF : -0.3 ~ 0.7V
Ver. 1.0 Aug. 05, 2005 11 / 32
Product Specification
ITEM Display Period Horizontal Blank Total Display Period Vertical Blank Total
Symbol
Note
2200/2
Min 70 65.5 57
Max 77 68.9 63
Note 148.5/2
fCLK fH fV
Note : The Input of HSYNC & VSYNC signal does not have an effect on normal operation(DE Only Mode). The performance of the electro-optical characteristics may be influenced by variance of the vertical refresh rate.
Ver. 1.0
12 / 32
Product Specification
DCLK
tCLK
0.5 VDD
Invalid data
Pixel 0,0
Pixel 2,0
Invalid data
Invalid data
Pixel 1,0
Pixel 3,0
Invalid data
DE(Data Enable) * tHT = tHFP + tWH +tHBP * tHT HSync tWH tHBP tHV tHFP
tVT
DE(Data Enable)
Ver. 1.0
13 / 32
Product Specification
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black Red (255) Green (255) 0 1 0 0 0 1 1 1 Dark 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 ... 1 1 1 1 0 0 1 1 0 0 1 1 0 0 ... 0 0 Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 ... 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 1 0 0 1 1 0 0 1 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 1 1 0 0 1 1 0 0 1 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 1 1 1 1 1 1 0 1 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 1 0 0 0 1 1 0 1 1 1 1 0 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 0 0 1 1 1 0 1 1 0 1 1 0 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0
Basic Color
Blue (255) Cyan Magenta Yellow White RED (000) RED (001)
RED
GREEN
BLUE
Ver. 1.0
14 / 32
Product Specification
90%
90% 10%
0V
10%
T1 T 2
T5 T6
T7
Valid Data
T4 T9
Note :
1. Please avoid floating state of interface signal at invalid period. 2. When the interface signal is invalid, be sure to pull down the power supply VLCD to 0V. 3. Flicker would come out when power on-off(T7=under 2s) is tested over several ten-times. 4. The case when the T2/T5 exceed maximum specification, it operates protection pattern(Black pattern) till valid signal inputted. There is no reliability problem. 5. The T3/T4 is recommended value, the case when failed to meet a minimum specification, abnormal display would be shown. There is no reliability problem.
Aug. 05, 2005 15 / 32
Ver. 1.0
Product Specification
TB1 TB2
TB3 VBr
TB4 VBL VBL(Min) x 0.8 0V Table 10. POWER SEQUENCE FOR INVERTER
Value Parameter Min TB1 TB2 TB3 TB4 20 500 0 Typ Max 10 ms ms ms ms Unit
Remark
After Inverters connected
VBL(Min) x 0.8
Note : TB1 describes rising time of 0V to 24V and is not applied at restarting time. When the 24V Power is restart, the inverter enable signal must be restarted.
Ver. 1.0 Aug. 05, 2005 16 / 32
Product Specification
4. Optical Specification
Optical characteristics are determined after the unit has been ON and stable for approximately 2 Hrs in a dark environment at 252C. The specified optical values are measured at an approximate 50cm distance from the LCD surface on condition that viewing angle of and equal to 0 . FIG. 1 shows additional information concerning the measurement equipment and method. LCD Module Pritchard 880 or equivalent
Optical Stage(x,y)
50cm FIG. 1 Optical Characteristic Measurement Equipment and Method Table 11. OPTICAL CHARACTERISTICS Parameter
Contrast Ratio Surface Luminance, white Luminance Variation Response Time (Gray-to-Gray) RED GREEN Color Coordinates [CIE1931] BLUE WHITE Ta= 252C, VLCD=12.0V, fV=60Hz, Dclk=1`48.5MHz VBR=3.3V
Symbol
CR CR with DCR LWH WHITE 5P TrR , TrD Rx Ry Gx Gy Bx By Wx Wy
Min
600 (1200) 400
Value Typ
(800) (1600) 500 (8) 0.628 0.338 0.280 0.609 0.146 0.064 0.272 0.278
Max
-
Unit
Note
1
cd/m2 1.3 14 ms
2 3 4
Typ -0.03
Typ +0.03
Viewing Angle (CR>10) x axis, right(=0) r 85 89 x axis, left (=180) l 85 89 y axis, up (=90) u 85 89 y axis, down (=270) d 85 89 Viewing Angle (CR>10) Diagonal Direction Viewing Angle *** EZ Contrast 160R x axis, right(=45) r 85 89 x axis, left (=135) l 85 89 y axis, up (=225) u 85 89 y axis, down (=315) d 85 89 Without AI Gray Scale With AI Ver. 1.0 Aug. 05, 2005
degree
degree
6 17 / 32
Product Specification
Note : 1. Contrast Ratio(CR) is defined mathematically as : Surface Luminance with all white pixels Surface Luminance with all black pixels Measure Position : Center 1-point. Contrast Ratio = 2. Surface Luminance(LWH) is the luminance value measured at an approximate 50cm distance from the center 1-point of LCD surface as all pixels displaying white. See FIG. 2 for more information. 3. The variation of surface luminance , WHITE is defined as : WHITE(5P) = Maximum(Lon1,Lon2, Lon3, Lon4, Lon5) / Minimum(Lon1,Lon2, Lon3, Lon4, Lon5) Where Lon1 to Lon5 are the luminance with all pixels displaying white at 5 locations . For more information, see the FIG. 2. 4. Response time is defined as the required time for the transition from G(N) to G(M) (Rise Time, TrR) and from G(M) to G(N) (Decay Time, TrD). For additional information see the FIG. 3. (N<M) 5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD module surface. For more information, see the FIG. 4. 6. See Table 12 for gray scale specification Table 12. GRAY SCALE SPECIFICATION
Gray Level L0 L15 L31 L47 L63 L79 L95 L111 L127 L143 L159 L175 L191 L207 L223 L239 L255 Luminance [%] (Typ.) 0.12 0.32 1.10 2.60 4.90 8.10 12.1 16.7 21.6 28.0 35.4 43.9 53.3 64.1 75.8 88.0 100 Aug. 05, 2005 Luminance [%] (Typ.) with AI 0.06 0.13 0.64 1.80 3.56 6.20 10.3 14.2 19.5 25.5 32.6 40.8 50.4 60.2 72.4 85.0 100 18 / 32
Ver. 1.0
Product Specification
Measuring point for surface luminance & measuring point for luminance variation.
H A
B V
A : H / 4 mm B : V / 4 mm
H : 819.36 mm V : 460.89 mm
@ H,V : Active Area
Response time is defined as the following figure and shall be measured by switching the input signal for Gray(N) and Gray(M).
TrR 100 90
TrD
Optical Response
Ver. 1.0
19 / 32
Product Specification
Normal E Y = 90 , Up
= 180 , Left
= 0 , Right
= 270 , Down
Optical characteristics are determined after the unit has been ON for 30min in a dark environment at 252C. The values specified are at an approximate distance 1.2mm from the LCD surface at a viewing angle of and equal to 0 . It is presented additional information concerning the measurement equipment and method in FIG. 1.
EZ Contrast
UP
l=135
r=45
d=315
DOWN
Product Specification
5. Mechanical Characteristics
Table 13 provides general mechanical characteristics.
Table 13. MECHANICAL CHARACTERISTICS Item Horizontal Outline Dimension Vertical Depth Horizontal Bezel Area Vertical Horizontal Active Display Area Vertical Weight Surface Treatment 460.89 mm 10,500 g (Typ.), 11,000 g (Max.) Hard coating(3H) Anti-glare treatment of the front polarizer 469.8 mm 819.36 mm Value 877.0 mm 516.8 mm 55.5 mm 828.6 mm
Note : Please refer to page21 and 22 for mechanic drawings in terms of tolerance.
Ver. 1.0
21 / 32
Product Specification
<FRONT VIEW>
Ver. 1.0
22 / 32
Product Specification
<REAR VIEW>
Ver. 1.0
23 / 32
Product Specification
6. Reliability
Table 14. ENVIRONMENT TEST CONDITION No.
1 2 3 4
Test Item
High temperature storage test Low temperature storage test High temperature operation test Low temperature operation test Ta= 50C 240h Ta= -20C 240h Ta= 40C 50%RH Ta= 0C 240h
Condition
240h
Wave form : random Vibration level : 1.0Grms Bandwidth : 10-300Hz Duration : X,Y,Z, 30 min One time each direction Shock level : 100Grms Waveform : half sine wave, 2ms Direction : X, Y, Z One time each direction Ta= 40 C, 90%RH 0 - 14,000 feet(4267.2m) 0 - 40,000 feet(12192m)
Ver. 1.0
24 / 32
Product Specification
7-2. EMC
a) ANSI C63.4 Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electrical Equipment in the Range of 9kHZ to 40GHz. American National Standards Institute(ANSI), 1992 b) C.I.S.P.R Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment. International Special Committee on Radio Interference. c) EN 55022 Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment. European Committee for Electrotechnical Standardization.(CENELEC), 1998 ( Including A1: 2000 )
Ver. 1.0
25 / 32
Product Specification
2001 1
2002 2
2003 3
2004 4
2005 5
2006 6
2007 7
2. MONTH
Month Mark Jan 1 Feb 2 Mar 4 Apr 4 May 5 Jun 6 Jul 7 Aug 8 Sep 9 Oct A Nov B Dec C
3. PANEL CODE
Panel Code Mark P1 Factory 1 P2 Factory 2 P3 Factory 3 P4 Factory 4 P5 Factory 5 Hydis Panel H
4. FACTORY CODE
Factory Code Mark LPL Gumi K LPL Nanjing C Hee Sung D
5. SERIAL NO.
Year Mark 1 ~ 99999 00001 ~ 99999 100000 ~ A0001 ~ A9999, ..... , Z9999
b) Location of Lot Mark Serial NO. is printed on the label. The label is attached to the backside of the LCD module. This is subject to change without prior notice.
Product Specification
9. Precautions
Please pay attention to the followings when you use this TFT LCD module.
Product Specification
9-5. Storage
When storing modules as spares for a long time, the following precautions are necessary. (1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5C and 35C at normal humidity. (2) The polarizer surface should not come in contact with any other object. It is recommended that they be stored in the container in which they were shipped.
Ver. 1.0
28 / 32
Product Specification
Ver. 1.0
29 / 32
# APPENDIX 2 # APPENDIX-
Product Specification
NO. 1 2 3 4 5 6
DESCRIPTION PACKING ASSY PALLET BAND, PACKING BAND, CLIP ANGLE,COVER LABEL
MATERIAL
Ver. 1.0
30 / 32
Product Specification
Model
LC370WU1 (SL)(01)
Serial No. UL, TUV Mark LPL Logo US PATENT No. Origin
Inch
Year Month
Ver. 1.0
31 / 32
Product Specification
Pallet Label
LC370WU1 SL01
5 PCS
LC370WU1 SL01
10 PCS
Ver. 1.0
32 / 32