Beruflich Dokumente
Kultur Dokumente
W NEMA motors
Frames 56 to 587
2209E
2209E Issue 1.1e W NEMA motors
W NEMA motors
Introduction
Canadian Standards
Association
UL registration mark
Standards
Motors are manufactured to the standards listed below.
Standards
Motors to NEMA standards have CSA approval and generally comply with
Canadian (EEMAC) standards. Standard motors also meet CSA standard C390
(energy efficient) legislation (effective October 1997).
Motors are listed by Underwriters Laboratories Inc (UL).
The UL registration mark and certification number will be on each rating plate to
show product compliance and certification.
(1)
Motors operating from a correctly applied, sinusoidal (AC) supply meet the requirements of the EMC directive and are within the limits specified in standard
EN 60034-1
(2)
When installed in accordance with our customer safety and installation and maintenance instructions, they can be put into service only when the machinery into
which they are being incorporated, has been declared to be in conformity with the machinery directive in accordance with Article 4(2) and Annex IIB of that
Directive (98/37/EEC)
3
2209E Issue 1.1e W NEMA motors
Performance data
3600 min-1 (2 pole) aluminium
PN IN η Cos Ø
n Type 1.0 PN 1.0 PN LRT LRC LRC BDT PUT NEMA NEMA Inertia Inertia LPA
hp min–1 460 V 575 V 0.75 PN 0.75 PN % 460V 575V % % Design Code kgm2 lbft2 dB(A)
(kW) A A 0.5 PN 0.5 PN A A
0.33
(0.25)
3440 W-DA56-B 0.5 0.4
{ 74.0
73.0
60.0
0.84
0.80
0.70
} 240 3.3 2.7 290 210 B J 0.0011 0.026 64
0.5
(0.37)
3430 W-DA56-B 0.73 0.58
{ 74.0
72.0
66.0
0.87
0.85
0.75
} 220 4.2 3.4 290 190 B H 0.0011 0.026 64
0.75
(0.55)
3430 W-DA56-B 1.13 0.9
{ 74.0
74.0
70.0
0.84
0.78
0.68
} 200 6.6 5.3 250 170 B H 0.0011 0.026 64
1
(0.75)
3430 W-DA56-E 1.42 1.14
{ 78.5
77.0
72.0
0.84
0.78
0.68
} 240 8.8 7.1 300 210 B H 0.0014 0.033 64
1.5
(1.1)
3440 W-DA143T-F 2 1.6
{ 82.5
82.5
81.5
0.85
0.82
0.75
} 260 14.5 11.6 300 230 B J 0.0023 0.055 72
2
(1.5)
3460 W-DA145T-M 2.6 2.1
{ 84.0
85.0
84.0
0.85
0.82
0.75
} 300 24 19.6 350 270 B L 0.0028 0.066 72
3
(2.2)
3480 W-DA182T-M 3.5 2.8
{ 85.5
85.5
85.0
0.92
0.90
0.85
} 300 32 25.6 320 270 B K 0.008 0.19 64
5
(3)
3460 W-DA184T-S 5.7 4.6
{ 87.5
87.5
87.0
0.93
0.91
0.88
} 300 46 37 320 270 B J 0.01 0.24 64
7.5
(5.5)
3480 W-DA213T-J 8.5 6.8
{ 88.5
88.5
88.0
0.93
0.91
0.87
} 220 63 51 250 190 B H 0.02 0.47 60
10
(7.5)
3480 W-DA215T-M 11.2 9.0
{ 89.5
89.5
89.0
0.93
0.91
0.87
} 220 81 65 240 190 B H 0.023 0.55 60
15
(11)
3500 W-DA254T-L 16.8 13.4
{ 90.2
90.2
89.5
0.93
0.91
0.88
} 220 115 92 240 190 B G 0.052 1.23 65
20
(15)
3500 W-DA256T-T 22.3 17.9
{ 90.2
90.2
89.5
0.93
0.91
0.88
} 220 144 115 240 190 B G 0.68 1.61 65
25
(18.5)
3520 W-DA284TS-F 27.6 22.1
{ 91.0
91.0
90.5
0.93
0.92
0.89
} 200 180 144 240 170 B G 0.107 2.54 65
{ }
30 91.0 0.93
3520 W-DA286TS-L 33 26 91.0 0.92 200 215 172 240 170 B G 0.127 3.01 65
(22
90.5 0.89
Performance data
1800 min-1 (4 pole) aluminium
PN IN η Cos Ø
n Type 1.0 PN 1.0 PN LRT LRC LRC BDT PUT NEMA NEMA Inertia Inertia LPA
hp min–1 460 V 575 V 0.75 PN 0.75 PN % 460V 575V % % Design Code kgm2 lbft2 dB(A)
(kW) A A 0.5 PN 0.5 PN A A
{ }
66.0 0.70
0.25
1710 W-DA56-B 0.51 0.41 66.0 0.61 250 2.5 2.0 300 220 B J 0.0012 0.028 51
(0.2)
62.0 0.48
{ }
68.0 0.70
0.33
1710 W-DA56-B 0.65 0.52 68.0 0.61 200 3.1 2.5 285 170 B J 0.0012 0.028 51
(0.25)
62.0 0.48
{ }
68.0 0.70
0.5
1710 W-DA56-B 0.98 0.78 68.0 0.61 225 4.7 3.8 340 195 B J 0.0012 0.028 51
(0.37)
64.0 0.48
{ }
75.5 0.72
0.75
1710 W-DA56-E 1.29 1.03 75.5 0.63 240 6.8 5.5 270 210 B J 0.0015 0.036 51
(0.55)
72.0 0.49
{ }
82.5 0.71
1
1720 W-DA143T-E 1.6 1.28 80.0 0.60 300 11.5 9.2 320 270 B L 0.0028 0.066 57
(0.75)
76.0 0.48
{ }
84.0 0.74
1.5
1720 W-DA145T-K 2.25 1.8 84.0 0.65 250 17 13.6 280 220 B L 0.0035 0.083 57
(1.1)
82.5 0.52
{ }
84.0 0.77
2
1720 W-DA145T-T 2.9 2.3 84.0 0.70 250 23 18 280 220 B L 0.0047 0.11 57
(1.5)
82.5 0.58
{ }
87.5 0.83
3
1740 W-DA182T-S 4 3.2 87.5 0.76 250 32 25.6 300 220 B K 0.015 0.36 58
(2.2)
86.5 0.64
{ }
87.5 0.85
5
1740 W-DA184T-S 6.25 5.0 87.5 0.78 240 46 37 290 210 B J 0.015 0.36 58
(3)
87.0 0.67
{ }
89.5 0.84
7.5
1740 W-DA213T-L 9.3 7.5 89.5 0.81 200 62 50 240 170 B H 0.025 0.59 58
(5.5)
89.0 0.74
{ }
89.5 0.84
10
1750 W-DA215T-R 12.5 10 89.5 0.81 200 81 65 240 170 B H 0.029 0.69 58
(7.5)
89.0 0.74
{ }
91.0 0.88
15
1750 W-DA254T-R 17.6 14.1 91.0 0.85 200 112 90 240 170 B G 0.084 2.0 56
(11)
90.0 0.80
{ }
91.0 0.89
20
1760 W-DA256T-X 23 18.5 91.0 0.86 200 140 112 240 170 B F 0.112 2.66 56
(15)
90.0 0.82
{ }
92.4 0.89
25
1760 W-DA284T-M 29 23 92.4 0.86 200 182 146 240 170 B G 0.22 5.22 60
(18.5)
91.5 0.82
{ }
92.4 0.89
30
1760 W-DA286T-R 34 27.2 92.4 0.86 200 215 172 240 170 B G 0.23 5.46 60
(22)
91.5 0.82
Performance data
1200 min-1 (6 pole) aluminium
PN IN η Cos Ø
n Type 1.0 PN 1.0 PN LRT LRC LRC BDT PUT NEMA NEMA Inertia Inertia LPA
hp min–1 460 V 575 V 0.75 PN 0.75 PN % 460V 575V % % Design Code kgm2 lbft2 dB(A)
(kW) A A 0.5 PN 0.5 PN A A
{ }
64.0 0.55
0.166
1140 W-DA56-B 0.44 0.35 59.5 0.47 220 1.7 1.3 270 190 B K 0.0012 0.029 55
(0.12)
50.5 0.36
{ }
66.0 0.57
0.25
1140 W-DA56-B 0.63 0.5 63.0 0.48 210 2.4 1.9 270 180 B J 0.0012 0.029 55
(0.2)
56.0 0.38
{ }
66.0 0.54
0.33
1140 W-DA56-B 0.87 0.7 62.0 0.46 220 3.3 2.6 270 190 B J 0.0012 0.029 55
(0.25)
52.5 0.34
{ }
70.0 0.59
0.5
1140 W-DA56-G 1.13 0.91 70.0 0.50 230 4.5 3.6 270 200 B J 0.0019 0.045 55
(0.37)
64.0 0.39
{ }
75.0 0.58
0.75
1140 W-DA143T-G 1.6 1.28 74.0 0.49 300 7.6 6.1 300 210 B K 0.0028 0.066 59
(0.55)
70.0 0.38
{ }
80.0 0.62
1
1150 W-DA145T-T 1.88 1.5 78.0 0.54 270 11 8.8 270 240 B K 0.0039 0.093 59
(0.75)
75.0 0.40
{ }
85.5 0.70
1.5
1130 W-DA182T-M 2.35 1.9 85.5 0.62 220 19 15 250 190 B L 0.012 0.28 56
(1.1)
85.0 0.50
{ }
86.5 0.75
2
1130 W-DA184T-S 3.1 2.5 86.5 0.67 220 24 19 250 190 B L 0.014 0.33 56
(1.5)
86.0 0.55
{ }
87.5 0.75
3
1140 W-DA213T-F 4.3 3.4 87.5 0.67 160 30 24 230 140 B J 0.023 0.55 56
(2.2)
87.0 0.55
{ }
87.5 0.75
5
1150 W-DA215T-R 7.1 5.7 87.5 0.67 160 45 36 260 140 B J 0.033 0.78 56
(3)
87.0 0.55
{ }
89.5 0.78
7.5
1150 W-DA254T-M 10.1 8.1 89.5 0.70 200 60 48 240 170 B H 0.1 2.37 56
(5.5)
88.5 0.60
{ }
89.5 0.80
10
1160 W-DA256T-T 13.1 10.5 89.5 0.72 200 80 64 240 170 B H 0.122 2.9 56
(7.5)
88.5 0.63
{ }
90.2 0.84
15
1165 W-DA284T-L 18.6 14.9 90.2 0.77 220 118 94 250 190 B G 0.21 4.98 58
(11)
89.5 0.68
{ }
90.2 0.86
20
1165 W-DA286T-M 24 19.2 90.2 0.80 180 144 115 240 160 B G 0.23 5.46 58
(15)
89.5 0.70
Performance data
900 min-1 (8 pole) aluminium
PN IN η Cos Ø
n Type 1.0 PN 1.0 PN LRT LRC LRC BDT PUT NEMA NEMA Inertia Inertia LPA
hp min–1 460 V 575 V 0.75 PN 0.75 PN % 460V 575V % % Design Code kgm2 lbft2 dB(A)
(kW) A A 0.5 PN 0.5 PN A A
0.25
(0.2)
820 W-DA56-G 0.87 0.7
{ 59.5
55.0
46.0
0.45
0.39
0.33
} 230 2.6 2.1 270 200 B K 0.0019 0.045 51
0.33
(0.25)
820 W-DA56-M 1.06 0.84
{ 62.0
59.5
52.5
0.47
0.40
0.33
} 230 3.3 2.6 270 200 B J 0.0024 0.057 51
0.5
(0.37)
820 W-DA143T-G 1.12 0.9
{ 66.0
64.0
59.0
0.63
0.53
0.42
} 180 3.3 2.7 220 160 B F 0.0028 0.066 56
0.75
(0.55)
820 W-DA145T-M 1.97 1.57
{ 70.0
68.0
62.0
0.51
0.42
0.34
} 260 7.1 5.7 300 230 B J 0.0037 0.088 56
1
(0.75)
850 W-DA182T-M 2.1 1.7
{ 74.0
74.0
71.0
0.60
0.55
0.42
} 170 10.1 8.1 220 150 B K 0.012 0.285 54
1.5
(1.1)
850 W-DA184T-S 3.05 2.45
{ 77.0
77.0
73.0
0.60
0.55
0.42
} 170 12 9.6 220 150 B H 0.015 0.356 54
2
(1.5)
860 W-DA213T-J 3.3 2.7
{ 82.5
82.5
80.0
0.68
0.59
0.45
} 150 16.8 13.4 230 130 B H 0.025 0.593 54
3
(2.2)
860 W-DA215T-R 4.9 3.9
{ 84.0
84.0
81.0
0.68
0.59
0.45
} 190 25 20 230 170 B H 0.031 0.736 54
5
(3)
870 W-DA254T-E 7.4 5.9
{ 85.5
85.5
83.0
0.74
0.67
0.55
} 180 41 33 230 160 B H 0.09 2.13 54
7.5
(5.5)
870 W-DA256T-M 11.1 8.9
{ 85.5
85.5
83.0
0.74
0.67
0.55
} 170 58 46 230 150 B G 0.11 2.61 54
10
(7.5)
870 W-DA284T-F 13.9 11.1
{ 85.5
85.5
83.0
0.76
0.69
0.59
} 180 75 60 220 160 B G 0.19 4.51 56
15
(11)
870 W-DA286T-M 21 16.7
{ 85.5
85.5
83.0
0.76
0.69
0.59
} 180 110 88 220 160 B G 0.24 5.7 56
Performance data
3600 min-1 (2 pole) cast iron
PN IN η Cos Ø
n Type 1.0 PN 1.0 PN LRT LRC LRC BDT PUT NEMA NEMA Inertia Inertia LPA
hp min–1 460 V 575 V 0.75 PN 0.75 PN % 460V 575V % % Design Code kgm2 lbft2 dB(A)
(kW) A A 0.5 PN 0.5 PN A A
1.5
(1.1)
3440 W-DF143T-F 2.0 1.6 { 82.5
82.5
81.5
0.85
0.82
0.75
} 260 14.5 11.6 300 230 B J 0.0023 0.055 72
2
(1.5)
3460 W-DF145T-M 2.62 2.1 { 84.0
85.0
84.0
0.85
0.82
0.75
} 300 24 19.2 350 270 B L 0.0028 0.066 72
3
(2.2)
3480 W-DF182T-M 3.6 2.86 { 85.5
85.5
85.0
0.92
0.90
0.85
} 300 32 25.6 320 270 B K 0.008 0.19 64
5
(3.7)
3460 W-DF184T-S 5.8 4.6 { 87.5
87.5
87.0
0.93
0.91
0.88
} 300 46 37 320 270 B J 0.01 0.24 64
7.5
5.5)
3480 W-DF213T-J 8.5 6.8 { 88.5
88.5
88.0
0.93
0.91
0.87
} 220 63 51 250 190 B H 0.02 0.47 60
10
(7.5)
3480 W-DF215T-M 11.2 9.0 { 89.5
89.5
89.0
0.93
0.91
0.87
} 220 81 65 240 190 B H 0.023 0.55 60
15
(11)
3500 W-DF254T-L 16.7 13.4 { 90.2
90.2
89.5
0.93
0.91
0.88
} 220 115 92 240 190 B G 0.052 1.23 65
{ }
90.2 0.93
20
3500 W-DF256T-T 22.3 17.9 90.2 0.91 220 144 115 240 190 B G 0.068 1.61 65
(15)
89.5 0.88
25
(18.5)
3520 W-DF284TS-F 27.7 22.1 { 91.0
91.0
90.5
0.93
0.92
0.89
} 200 180 144 240 170 B G 0.107 2.54 65
30
(22)
3520 W-DF286TS-L 33 26.6 { 91.0
91.0
90.5
0.93
0.92
089
} 200 215 173 240 170 B G 0.127 3.01 65
40
(30)
3530 W-DF324TS-GX 45 36 { 91.7
91.2
89.0
0.91
0.90
0.87
} 180 288 230 240 150 B G 0.15 3.6 77
50
(37)
3530 W-DF326TS-NX 56 45 { 92.4
91.9
90.2
0.91
0.90
0.87
} 180 355 288 240 150 B G 0.18 4.3 77
60
(45)
3540 W-DF364TS-N 66 53 { 93.0
92.7
91.5
0.91
0.90
0.87
} 180 425 340 220 150 B G 0.47 11.2 79
75
(55)
3540 W-DF365TS-N 83 66 { 93.0
92.8
91.6
0.91
0.90
0.87
} 180 535 425 220 150 B G 0.56 13.3 79
100
(75)
3550 W-DF405TS-NE 110 88 { 93.6
93.2
91.8
0.91
0.90
0.87
} 170 715 570 220 150 B G 0.7 16.7 81
125
(90)
3560 W-DF444TS-NE 136 109 { 94.5
94.0
92.5
0.91
0.90
0.87
} 150 895 715 210 125 B G 0.8 19 81
150
(110)
3560 W-DF445TS-NE 163 131 { 94.5
94.3
93.0
0.91
0.90
0.87
} 150 1075 860 210 125 B G 1.4 33.3 82
200
(150)
3560 W-DF445TS-N 217 173 { 95.0
94.5
92.5
0.91
0.90
0.87
} 150 1430 1140 210 125 B G 1.7 40.5 82
250
(185)
3570 W-DF447TS-N 270 216 { 95.4
94.8
93.0
0.91
0.90
0.87
} 150 1780 1425 200 125 B G 1.8 42.9 82
300
(225)
3580 W-DF505SZ-R 324 259 { 95.4
94.9
93.3
0.91
0.90
0.87
} 150 2135 1705 200 125 B G 3.1 73.8 84
350
(250)
3580 W-DF585SZ-J 377 302 { 95.4
95.0
93.5
0.91
0.90
0.87
} 160 2525 2020 210 130 B G 5.3 126 86
{ }
95.8 0.91
400
3580 W-DF585SZ-N 429 343 95.4 0.90 160 2870 2295 210 130 B G 5.9 140 86
(300)
94.0 0.87
450
(335)
3580 W-DF586SZ-J 483 387 { 95.8
95.4
94.0
0.91
0.90
0.87
} 160 3235 2590 210 130 B G 6.3 150 86
500
(375)
3580 W-DF586SZ-N 535 428 { 96.2
96.0
94.4
0.91
0.90
0.87
} 160 3580 2865 210 130 B G 7 167 86
Performance data
1800 min-1 (4 pole) cast iron
PN IN η Cos Ø
n Type 1.0 PN 1.0 PN LRT LRC LRC BDT PUT NEMA NEMA Inertia Inertia LPA
hp min–1 460 V 575 V 0.75 PN 0.75 PN % 460V 575V % % Design Code kgm2 lbft2 dB(A)
(kW) A A 0.5 PN 0.5 PN A A
1
(0.75)
1720 W-DF143T-E 1.6 1.28 { 82.5
80.0
76.0
0.71
0.60
0.48
} 300 11.5 9.2 320 270 B L 0.0028 0.066 57
1.5
(1.1)
1720 W-DF145T-K 2.26 1.81 { 84.0
84.0
82.5
0.74
0.65
0.52
} 250 17 13.6 280 220 B L 0.0035 0.083 57
2
(1.5)
1720 W-DF145T-T 2.9 2.32 { 84.0
84.0
82.5
0.77
0.70
0.58
} 250 22.9 18.3 280 220 B L 0.0047 0.11 57
3
(2.2)
1740 W-DF182T-S 3.9 3.1 { 87.5
87.5
86.5
0.83
0.76
0.64
} 250 32 25.6 300 220 B K 0.015 0.36 58
5
(3.7)
1740 W-DF184T-S 6.3 5.0 { 87.5
87.5
87.0
0.85
0.78
0.67
} 240 46 37 290 210 B J 0.015 0.36 58
7.5
(5.5)
1740 W-DF213T-L 9.3 7.5 { 89.5
89.5
89.0
0.84
0.81
0.74
} 200 62 50 240 170 B H 0.025 0.59 58
10
(7.5)
1750 W-DF215T-R 12.5 10 { 89.5
89.5
89.0
0.84
0.81
0.74
} 200 81 65 240 170 B H 0.029 0.69 58
15
(11)
1750 W-DF254T-R 17.5 14
{ 91.0
91.0
90.0
0.88
0.85
0.80
} 200 112 90 240 170 B G 0.084 2.0 56
20
(15)
1760 W-DF256T-X 23.1 18.5
{ 91.0
91.0
90.5
0.89
0.86
0.82
} 200 140 112 240 170 B F 0.112 2.66 56
25
(18.5)
1760 W-DF284T-M 28.5 22.8
{ 92.4
92.4
91.5
0.89
0.86
0.82
} 200 182 146 240 170 B G 0.22 5.22 60
30
(22)
1760 W-DF286T-R 34 27.3 { 92.4
92.4
91.5
0.89
0.86
0.82
} 200 214 172 240 170 B G 0.23 5.46 60
40
(30)
1765 W-DF324T-NX 47 38 { 93.0
92.7
91.3
0.85
0.82
0.75
} 200 288 230 280 165 B G 0.35 8.3 70
50
(37)
1765 W-DF326T-N 59 47 { 93.0
92.8
91.3
0.85
0.82
0.75
} 200 355 288 280 165 B G 0.45 10.7 71
60
(45)
1770 W-DF364T-N 71 56 { 93.6
93.4
92.2
0.85
0.83
0.76
} 200 430 340 240 165 B G 0.65 15.5 72
75
(55)
1770 W-DF365T-N 88 70 { 94.1
93.9
92.7
0.85
0.83
0.76
} 200 540 430 240 165 B G 0.75 17.9 72
100
(75)
1775 W-DF405T-NE 117 93 { 94.5
94.3
93.2
0.85
0.83
0.76
} 220 715 570 250 175 B G 1.4 33.3 74
125
(90)
1775 W-DF444T-NE 142 114 { 94.5
94.4
93.5
0.87
0.85
0.78
} 220 890 715 250 175 B G 1.6 38.1 74
150
(110)
1775 W-DF445T-NE 170 136 { 95.0
94.5
93.6
0.87
0.85
0.78
} 200 1070 855 220 170 B G 2.5 59.5 76
200
(150)
1775 W-DF445T-N 224 179 { 95.0
94.8
93.8
0.88
0.86
0.78
} 200 1430 1145 220 170 B G 3 71.4 76
250
(185)
1775 W-DF447T-N 277 221 { 95.0
95..0
94.0
0.89
0.87
0.80
} 190 1800 1435 220 170 B G 3.2 76.2 76
300
(225)
1780 W-DF505Z-R 331 265 { 95.4
95.4
94.5
0.89
0.86
0.80
} 190 2150 1720 220 170 B G 6.4 152 78
350
(250)
1785 W-DF585Z-J 386 309
{ 95.4
95.4
94.8
0.89
0.88
0.82
} 180 2505 2005 210 160 B G 9.5 226 80
400
(300)
1785 W-DF585Z-N 439 351 { 95.8
95.5
95.0
0.89
0.88
0.83
} 180 2850 2280 210 160 B G 10.6 252 80
450
(335)
1785 W-DF586Z-J 489 391 { 95.8
95.7
95.2
0.90
0.89
0.84
} 180 3175 2540 210 160 B G 11.9 283 80
500
(375)
1787 W-DF586Z-N 541 433
{ 96.2
96.0
95.4
0.90
0.89
0.84
} 180 3515 2810 210 160 B G 13.2 314 80
9
For performance curves - see page 24
2209E Issue 1.1e W NEMA motors
Performance data
1200 min-1 (6 pole) cast iron
PN IN η Cos Ø
n Type 1.0 PN 1.0 PN LRT LRC LRC BDT PUT NEMA NEMA Inertia Inertia LPA
460 V 575 V 0.75 PN 0.75 PN
hp min–1 % 460V 575V % % Design Code kgm2 lbft2 dB(A)
A A 0.5 PN 0.5 PN
(kW) A A
0.75
(0.55)
1140 W-DF143T-G 1.61 1.29 { 75.0
74.0
70.0
0.58
0.49
0.38
} 300 7.6 6.1 300 210 B K 0.0028 0.066 59
1
(0.75)
1150 W-DF145T-T 1.89 1.51 { 80.0
78.0
75.0
0.62
0.54
0.40
} 270 11 8.8 270 240 B K 0.0039 0.093 59
1.5
(1.1)
1130 W-DF182T-M 2.35 1.88 { 85.5
85.5
85.0
0.70
0.62
0.50
} 220 18.8 15 250 190 B L 0.012 0.28 56
2
(1.5)
1130 W-DF184T-S 2.89 2.31 { 86.5
86.5
86.0
0.75
0.67
0.55
} 220 24 19.2 250 190 B L 0.014 0.33 56
3
(2.2)
1140 W-DF213T-F 4.3 3.4
{ 87.5
87.5
87.0
0.75
0.67
0.55
} 160 30 23.8 230 140 B J 0.023 0.55 56
5
(3.7)
1150 W-DF215T-R 7.1 5.7
{ 87.5
87.5
87.0
0.75
0.67
0.55
} 160 45 36 260 140 B J 0.033 0.78 56
7.5
(5.5)
1150 W-DF254T-M 10.1 8.0 { 89.5
89.5
88.5
0.78
0.70
0.60
} 200 60 48 240 170 B H 0.1 0.37 56
10
(7.5)
1160 W-DF256T-T 13.1 10.5 { 89.5
89.5
88.5
0.80
0.72
0.63
} 200 80 64 240 170 B H 0.122 2.9 56
15
(11)
1165 W-DF284T-L 18.5 14.8 { 90.2
90.2
89.5
0.84
0.77
0.68
} 220 118 95 250 190 B G 0.21 4.98 58
20
(15)
1165 W-DF286T-M 24.1 19.3 { 90.2
90.2
89.5
0.86
0.80
0.70
} 180 144 115 240 160 B G 0.23 5.46 58
25
(18.5)
1170 W-DF324T-NX 32 25.2 { 91.7
91.4
90.0
0.81
0.78
0.67
} 180 179 140 200 170 B G 0.48 11.4 67
30
(22)
1170 W-DF326T-N 38 30 { 91.7
91.6
90.4
0.81
0.78
0.67
} 180 216 171 200 170 B G 0.75 17.8 67
40
(30)
1180 W-DF364T-N 50 40 { 93.0
92.5
91.0
0.80
0.76
0.66
} 180 290 232 200 170 B G 1.1 26.2 68
50
(37)
1180 W-DF365T-N 63 50
{ 93.0
92.8
91.5
0.80
0.76
0.66
} 180 355 285 200 170 B G 1.3 31 68
60
(45)
1180 W-DF404T-N 74 59 { 93.6
93.2
91.8
0.81
0.78
0.69
} 180 425 340 200 170 B G 2.55 60.7 70
75
(55)
1180 W-DF405T-N 93 74 { 93.6
93.3
92.0
0.81
0.78
0.69
} 180 535 425 200 170 B G 2.9 69 70
100
(75)
1185 W-DF444T-N 120 96 { 94.1
93.7
92.4
0.83
0.80
0.72
} 180 720 575 200 170 B G 5 119 73
125
(90)
1185 W-DF445T-N 150 120 { 94.1
93.8
92.8
0.83
0.81
0.72
} 180 900 720 200 170 B G 6 143 73
{ }
95.0 0.83
150
1185 W-DF504Z-N 178 142 94.5 0.81 170 1065 850 200 160 B G 6.1 145 75
(110)
93.2 0.72
200
(150)
1185 W-DF505Z-N 237 190 { 95.0
94.7
93.4
0.83
0.81
0.72
} 170 1420 1140 200 160 B G 7.3 174 75
250
(185)
1185 W-DF585Z-J 290 232 { 95.0
94.9
93.6
0.85
0.83
0.76
} 160 1765 1415 200 140 B G 11.1 264 77
300
(225)
1185 W-DF586Z-J 348 278
{ 95.0
94.9
93.6
0.85
0.83
0.76
} 160 2155 1720 200 140 B G 13.6 324 77
350
(250)
1190 W-DF586Z-N 406 325 { 95.0
95.0
93.8
0.85
0.83
0.76
} 160 2515 2015 200 140 B G 15.2 362 77
400
(300)
1190 W-DF587Z-J 464 371 { 95.0
95.0
93.8
0.85
0.83
0.76
} 160 2875 2300 200 140 B G 16.9 402 77
10
450
(335 )
1190 W-DF587Z-N 520 416 { 95.4
95.2
94.2
0.85
0.83
0.76
} 160 3220 2575 200 140 B G 18.6 443 77
Performance data
900 min-1 (8 pole) cast iron
PN IN η Cos Ø
n Type 1.0 PN 1.0 PN LRT LRC LRC BDT PUT NEMA NEMA Inertia Inertia LPA
460 V 575 V 0.75 PN 0.75 PN
hp min–1 % 460V 575V % % Design Code kgm2 lbft2 dB(A)
A A 0.5 PN 0.5 PN
(kW) A A
{ }
66.0 0.63
0.5
820 W-DF143T-G 1.13 0.9 64.0 0.53 180 3.3 2.66 220 160 B F 0.0028 0.066 56
(0.37)
59.0 0.42
{ }
70.0 0.51
0.75
820 W-DF145T-M 1.97 1.57 68.0 0.42 260 7.1 5.7 300 230 B J 0.0037 0.088 56
(0.55)
62.0 0.34
{ }
74.0 0.60
1
850 W-DF182T-M 2.1 1.69 74.0 0.55 170 10.1 8.1 220 150 B K 0.012 0.285 54
(0.75)
71.0 0.42
1.5
(1.1)
850 W-DF184T-S 3.0 2.43
{ 77.0
77.0
73.0
0.60
0.55
0.42
} 170 11.9 9.6 220 150 B H 0.015 0.356 54
{ }
82.5 0.68
2
860 W-DF213T-J 3.3 2.67 82.5 0.59 150 16.8 13.6 230 130 B H 0.025 0.593 54
(1.5)
80.0 0.45
{ }
84.0 0.68
3
860 W-DF215T-R 4.9 3.9 84.0 0.59 190 25 19.9 230 170 B H 0.031 0.736 54
(2.2)
81.0 0.45
5
(3.7)
870 W-DF254T-E 7.4 5.9 { 85.5
85.5
83.0
0.74
0.67
0.55
} 180 41 33 230 160 B H 0.09 2.13 54
{ }
85.5 0.74
7.5
870 W-DF256T-M 11.1 8.9 85.5 0.67 170 58 46 230 150 B G 0.11 2.61 54
(5.5)
83.0 0.55
10
(7.5)
870 W-DF284T-F 14.4 11.5 { 85.5
85.5
83.0
0.76
0.69
0.59
} 180 75 60 220 160 B H 0.19 4.51 56
15
(11)
870 W-DF286T-M 21.6 17.3 { 85.5
85.5
83.0
0.76
0.69
0.59
} 180 110 88 220 160 B G 0.24 5.7 56
20
(15)
880 W-DF324T-NX 28.7 22.9 { 89.5
89.5
88.3
0.73
0.67
0.54
} 150 144 115 200 130 B G 0.48 11.4 65
25
(18.5)
880 W-DF326T-N 36 29 { 89.5
89.5
88.3
0.73
0.67
0.54
} 150 180 144 200 130 B G 0.75 17.9 65
30
(22)
880 W-DF364T-N 42 34
{ 91.0
90..7
89.0
0.73
0.67
0.54
} 150 214 173 200 130 B G 1.23 29.3 67
{ }
91.0 0.74
40
880 W-DF365T-N 56 44 90.8 0.67 150 285 224 200 130 B G 1.47 35 67
(30)
89.5 0.54
{ }
92.4 0.74
50
885 W-DF404T-N 68 55 92.0 0.68 150 350 286 200 130 B G 2.55 60.7 68
(37)
90.5 0.57
60
(45)
885 W-DF405T-N 82 66 { 92.4
92.2
91.0
0.74
0.68
0.57
} 150 430 345 200 130 B G 2.9 69 68
75
(55)
885 W-DF444T-N 101 81 { 93.0
92.8
91.5
0.75
0.69
0.58
} 140 535 425 200 120 B G 5 119 69
{ }
93.0 0.75
100
885 W-DF445T-N 134 107 92.9 0.69 140 720 575 200 120 B G 6 143 69
(75)
91.6 0.58
{ }
93.6 0.76
125
885 W-DF504Z-N 165 132 93.4 0.70 140 890 710 200 120 B G 6.1 145 70
(90)
92.0 0.60
{ }
93.6 0.76
150
885 W-DF505Z-N 197 158 93.5 0.70 140 1080 865 200 120 B G 7.3 174 70
(110)
92.2 0.60
{ }
94.1 0.77
200
890 W-DF585Z-J 258 207 93.8 0.73 140 1440 1155 200 120 B G 12.2 290 75
(150)
92.2 0.64
{ }
94.5 0.77
250
890 W-DF586Z-J 322 257 94.1 0.73 140 1800 1435 200 120 B G 15.2 362 77
(185)
94.0 0.64
{ }
95.0 0.77
300
890 W-DF587Z-N 384 307 94.5 0.73 140 2150 1715 200 120 B G 18.6 443 77
(225)
93.0 0.64
Dimensions
Foot, flange and face mounting frames 56 to 286 - aluminium
AB
C
AC
CBW
ØP
ES
IM B3
IM 1001
CBH
Mounting options
D
ØH
Ø AA
W G J J
2F BA N-W 2E
B A
C
BE
45°
HOLES Ø BF
ON AJ PCD
IM B5/IM B35
IM 3001/IM 2001
Ø BD
Ø AK
Mounting options
BB
BE 45°
HOLES Ø BF
ON AJ PCD
IM B14/IM B34
IM 3601/IM2101
Ø BD
Ø AK
Mounting options
BB
12
2209E Issue 1.1e W NEMA motors
Shaft
Type
ES W N-W R S U
W-DA56 13/8 3
/8 17/8 0.517 3
/16 0.625
W-DA143T 15/16 3
/16 21/4 0.771
3
/16 0.875
W-DA145T 15/16 3
/16 21/4 0.771
3
/16 0.875
S
W-DA182T 13/4 15
/64 23/4 0.986
1
/4 1.125
ØU
W-DA184T 13/4 15
/64 23/4 0.986
1
/4 1.125
W-DA213T 23/8 1
/4 33/8 1.201
5
/16 1.375
W-DA215T 23/8 1
/4 33/8 1.201
5
/16 1.375
W-DA254T 27/8 1
/4 4 1.416
3
/8 1.625
W-DA256T 27/8 1
/4 4 1.416
3
/8 1.625
W-DA284T 31/4 9
/32 45/8 1.591
1
/2 1.875 R
W-DA284TS 17/8 9
/32 31/4 1.416
3
/8 1.625
W-DA286T 31/4 9
/32 45/8 1.591
1
/2 1.875
W-DA286TS 17/8 9
/32 31/4 1.416
3
/8 1.625
Dimensions
Foot, flange and face mounting frames 143 to 286 - cast iron
AB
C
AC
CBW
ØP
ES
IM B3
IM 1001
CBH
Mounting options
D
ØH
Ø AA
W G J J
2F BA N-W 2E
B A
C
BE
45°
HOLES Ø BF
ON AJ PCD
IM B5/IM B35
IM 3001/IM 2001
Ø BD
Ø AK
Mounting options
BB
BE 45°
HOLES Ø BF
ON AJ PCD
IM B14/IM B34
IM 3601/IM2101
Ø BD
Ø AK
Mounting options
BB
14
2209E Issue 1.1e W NEMA motors
Foot, flange and face mounting frames 143 to 286 - cast iron
Type Shaft
ES W N-W R S U
W-DF143T 123/64 5
/16 21/4 0.771 3
/16 0.875
W-DF145T 123/64 5
/16 21/4 0.771 3
/16 0.875
W-DF182T 13/4 1
/4 23/4 0.986 1
/4 1.125
S
W-DF184T 13/4 1
/4 23/4 0.986 1
/4 1.125
ØU
W-DF184T 13/4 1
/4 23/4 0.986 1
/4 1.125
W-DF213T 23/8 1
/4 33/8 1.201 5
/16 1.375
W-DF215T 23/8 1
/4 33/8 1.201 5
/16 1.375
W-DF254T 27/8 15
/64 4 1.416 3
/8 1.625
W-DF256T 27/8 15
/64 4 1.416 3
/8 1.625
W-DF284T 31/4 9
/32 45/8 1.591 1
/2 1.875 R
W-DF284TS 17/8 9
/32 31/4 1.416 3
/8 1.625
W-DF286T 31/4 9
/32 45/8 1.591 1
/2 1.875
W-DF286TS 17/8 9
/32 31/4 1.416 3
/8 1.625
Dimensions
Foot, flange and face mounting frames 324 to 444 - cast iron
AB
C
AC
CBW
ØP
ES
IM B3
IM 1001
CBH
Mounting options
D
ØH
Ø AA
W G J J
2F BA N-W 2E
B A
C
BE
45°
HOLES Ø BF
ON AJ PCD
IM B5/IM B35
IM 3001/IM 2001
Ø BD
Ø AK
Mounting options
BB
BE 45°
HOLES Ø BF
ON AJ PCD
IM B14/IM B34
IM 3601/IM2101
Ø BD
Ø AK
Mounting options
BB
(1)
4 holes ØAJ for frame sizes 324 to 365
8 holes ØAJ for frame sizes 404 to 587
(2)
4 holes ØAJ for frame sizes 324 to 326
16 8 holes ØAJ for frame sizes 364 to 505
2209E Issue 1.1e W NEMA motors
Dimensions
Foot, flange and face mounting frames 445 to 587 - cast iron
AB
C
AC
CBW
ØP
ES
IM B3
IM 1001
CBH
Mounting options
D
ØH
Ø AA
W G J J
2F BA N-W 2E
B A
C
BE
45°
HOLES Ø BF
ON AJ PCD
IM B5/IM B35
IM 3001/IM 2001
Ø BD
Ø AK
Mounting options
BB
BE 45°
HOLES Ø BF
ON AJ PCD
IM B14/IM B34
IM 3601/IM2101
Ø BD
Ø AK
Mounting options
BB
(1)
4 holes ØAJ for frame sizes 324 to 365
8 holes ØAJ for frame sizes 404 to 587
(2)
4 holes ØAJ for frame sizes 324 to 326
18 8 holes ØAJ for frame sizes 364 to 505
2209E Issue 1.1e W NEMA motors
Aluminium frame
Net Weight Gross Weight Cubage
Type Kg lb Kg lb m3 ft3
20
2209E Issue 1.1e W NEMA motors
Technical information:
Mechanical
Type Polarity Drive end Non-drive end Drive end Non-drive end
Frame sizes 56, 143 and 145T have bearings with CN clearances, frame sizes 182T - 587Z have bearings with C3 clearance ‘medium’ series
(1)
Sizes given are in mm, and represent bore x outside diameter x width
(2)
Grease life expected at 80ºC bearing temperature x 103 hours (L1 regreasing interval)
21
2209E Issue 1.1e W NEMA motors
Technical information:
Mechanical
Maximum permissible external axial thrust and radial loads in pounds force (lbf)
Technical information:
Mechanical
Maximum permissible external axial thrust and radial loads in pounds force (lbf)
Maximum permissible
Horizontal shaft Vertical shaft radial load at end of shaft
Key
Symbol Comments Additional Info Unit
PN Rated power hp
kW
DOL starting
(BS EN 60034-12 Design N)
Torque
BDT
LRC
LRT
PUT
IN MN
0 Speed 0 Speed
(LRC) Starting Current or Locked Rotor Current Performance figures are subject to NEMA/CSA tolerances.
(IN) Full Load Current Performance figures are based on a 460 volt winding.
(LRT) Starting Torque or Locked Rotor Torque
(PUT) Pull Up Torque or Run Up Torque
(BDT) Pull Out Torque or Breakdown Torque To calculate IN on special voltages, multiply the IN at
(MN) Full Load Torque
460 volts by the following factors.
Torque/Speed curves for specific motors can
be supplied on request.
Voltage 400 420 440 480 500 525
Dimensions
Shaft
Dim U Limits
S
ØU
+0.000”
0.625” to 1.375” –0.0005”
+0.000”
1.625” to 3.875” –0.001”
R
Flange Face
4 /2 ” to 11”
1
+0.000” +0.000”
4 /2 ” to 10 /2 ”
1 1
–0.003” –0.003”
+0.000” +0.000”
14” to 18” 14 /2 ” to 16 /2”
1 1
–0.005” –0.005”
All dimensions in inches. On frame sizes 143 to 256 the BA dimension may not
comply for B35 mounting, please refer to Brook Crompton.
Cable entry may be arranged in any one of four positions
at 90° intervals. Suffix ‘S’ in the frame indicates a short
shaft, fitted on direct coupled 2 pole motors. If required,
this could be fitted on 4 pole motors. It is important to state
which shaft is required. Include suffix ‘S’ for a short shaft
and request a certified print. Dimensions should not be
used for installation purposes unless specially certified. A
fully certified print will be forwarded on receipt of official
order, if requested.
25
2209E Issue 1.1e W NEMA motors
Notes
26
2209E Issue 1.1e W NEMA motors
Notes
27
Rotating Electrical Machines
Every care has been taken to ensure the accuracy of the information
contained in this publication, but, due to a policy of continuous
development and improvement the right is reserved to supply products
which may differ slightly from those illustrated and described in this
publication
Brook Crompton
St Thomas’ Road Huddersfield
West Yorkshire HD1 3LJ UK
Tel: +44 (0) 1484 557200
Fax: +44 (0) 1484 557201 Printed in England
E-mail: csc@brookcrompton.com gh097/08/02 2209E issue 1.1e
Internet: www.brookcrompton.com © Copyright 2002. Brook Crompton. All rights reserved.