Sie sind auf Seite 1von 8

Technical Description PR litronic

744
Crawler Tractor `

Engine Output 184 kW/250 hp


Operating Weight 24,605 – 29,115 kg/54,245 – 64,188 lb
Basic machine
Engine Operator’s cab
Liebherr diesel engine D 936-L A6 Cab Resiliently mounted cab with positive pressure
Emission regulations according to ventilation, can be tilted with the hand pump
2004/26/EEC Stage IIIa, EPA/CARB Tier 3 40° to the rear. With integral ROPS Rollover
Rating (ISO 9249) 184 kW / 250 hp Protective Structure (ISO 3471) and FOPS
Rating (SAE J1349) 184 kW / 247 hp Falling Objects Protective Structure (ISO 3449)
Rated speed 1,600 1/min Operator’s seat Fully adjustable, suspended swivel seat
Displacement 10.5 l / 641 in3 adjustable to operator's weight
Design 6 cylinder in-line engine (wet-sleeve), Monitoring Combination of LCD and analog instrument
water-cooled, turbocharged, intercooled panel
Injection system Direct fuel injection, pump-line-nozzle system Sound-pressure level LpA (inside cab) = 78 dB(A) 2000/14/EC
Lubrication Pressurized lube system, deep oil pan for LwA (surround noise) = 105 dB(A) 2000/14/EEC
inclination up to 45-degree
Operating voltage 24 V
Alternator DC / 80 A
Starter 7.8 kW / 11 hp Undercarriage
Batteries 2 x 170 Ah / 12V L LGP
Air cleaner Dry-type air cleaner with safety element, Mount Via separate pivot shafts and an oscillating
aspirated pre-cleaner with automatic dust equaliser bar
ejector and dash-mounted restriction indicator Chains Sealed and lubricated chains, single-bar
Cooling system Water cooler hydrostatically driven and grouser moderate service shoes, track chain
thermostatically controlled tension via grease tensioner and hydraulic
cylinders
Links 40 each side 44 each side
Track rollers/
Travel drive, control carrier rollers 7/2 each side 8/2 each side
Transmission system Closed-loop hydrostatic travel drive, Sprocket segments 5 each side 5 each side
each track is driven independently Track shoes standard 508 mm/20” 812 mm/32”
Travel speed* Infinitely variable Track shoes optional 560 mm/22” 914 mm/36”
Speed range 1: 0-4.0 km/h / 0-2.48 mph 610 mm/24”
Speed range 1: (4.8 km/h / 2.9 mph reverse) 710 mm/28”
Speed range 2: 0-6.5 km/h / 0-4.0 mph
Speed range 1: (7.8 km/h / 4.8 mph reverse)
Speed range 3: 0-11.0 km/h / 0-6.8 mph
* Travel speed ranges can be set with the Hydraulic system
programmable control (memory function) System type Load Sensing proportional pump flow control
Drawbar pull at 365 kN / 82,026 lb Pump type Swash plate variable displacement piston pump
1.5 km/h / 0.9 mph Pump flow max. 260 l/min / 57.2 gpm
Electronic control Electronic engine speed sensing control Pressure limitation 260 bar / 3,770 PSI
automatically adjusts travel speed and drawbar Control valve 2 segments, expandable to 4
pull to match changing load conditions Filter system Return filter with magnetic rod in the hydraulic
Steering Hydrostatic, infinitely variable track speeds tank
provide unlimited maneuverability and Control Single joystick lever for all blade functions
optimum control for full power turns and
counterrotation
Service brake Wear-free, hydrostatic (dynamic braking)
Automatic park brake Wear-free, wet multiple-disc brakes Drawbar pull PR 744
Cooling system Separate oil cooler, hydrostatically driven and
kN x 1000 Ib
thermostatically controlled
Filter system Micro cartridge filters 100
400
Final drive Heavy-duty combination spur gear with
365 80
double-reduction planetary final drives, double
sealed with electronic seal-integrity indicator 300
Drawbar pull

Control Single-lever steering allows for full power turns 60


and counterrotation 200
40

100 20
Refill capacities
Fuel tank 535 l (117.7 gallons) 0 0
Cooling system 62 l (13.6 gallons) 0 1 2 3 4 5 6 7 mph
Engine oil with oil filters 43 l (9.5 gallons) 0 1 2 3 4 5 6 7 8 9 10 11 km/h
Splitter box 6.4 l (1.4 gallons) Travel speed
Hydraulic tank 189 l (41.6 gallons)
Final drive, each 19.5 l (4.3 gallons) Usable drawbar pull will depend on traction and weight of tractor

2 PR 744 Litronic
Dimensions

A E F G

H
D
C
B

Dimensions PR 744 L PR 744 LGP

A Height over cab mm 3,434 3,434


ft-in 11’3” 11’3”
B Overall length without attachments mm 4,657 4,692
ft-in 15’3” 15’5”
C Distance idler/sprocket centre mm 2,992 3,316
ft-in 9’10” 10’11”
D Height of grousers mm 71.5 71.5
inch 2.81” 2.81”
E Track gauge mm 1,980 2,180
ft-in 6’6” 7’2”
F Total width without trunnions (standard shoe width) mm 2,488 2,992
ft-in 8’2” 9’10”
G Total width over blade-mounting trunnions mm 3,000 3,600
ft-in 9’10” 11’10”
H Ground clearance mm 546 546
ft-in 1’9” 1’9”
Tractor shipping weight1 kg 20,920 21,740
lb 46,121 47,928
1 Includes coolant, lubricants, 20% fuel, ROPS/FOPS cab and track pads standard

PR 744 Litronic 3
Front attachment

A C

H
E

Semi-U blade and Semi-U blade Straight blade


straight blade L LGP

Blade capacity according to ISO 9246 m3 7.2 6.0


yd3 9.4 7.9
A Height of blade mm 1,545 1,320
ft-in 6’5” 4’4”
B Width of blade mm 3,690 4,520
ft-in 14’4” 14’10”
C Lifting height mm 1,222 1,179
ft-in 4’10” 3’10”
D Depth below ground mm 511 616
ft-in 2’1” 2’0”
E Max. blade pitch 10° 10°

Max. blade tilt mm 930 933


ft-in 3’4” 3’1”
H Overall length mm 6,050 5,935
ft-in 23’0” 19’6”
Operating weight1 kg 24,605 25,570
lb 54,245 56,372
Ground pressure1 kg/cm2 0.81 0.47
PSI 11.52 6.68
1 Includes coolant, lubricants, full fuel tank, ROPS/FOPS cab, semi-U blade/straight blade, operator and track pads standard

4 PR 744 Litronic
Front attachment

B1
B G

C
A

E
D H H1

Mechanical Angle blade


angle blade L

Blade capacity according to ISO 9246 m3 4.90


yd3 6.41
A Height of blade mm 1,200
ft-in 3’11”
B Width of blade mm 4,590
ft-in 15’1”
B1 Transport width mm 4,175
ft-in 13’8”
C Lifting height mm 1,290
ft-in 4’3”
D Depth below ground mm 570
ft-in 1’10”
F Max. blade angle 25°

Max. blade tilt mm 735


ft-in 2’5”
G Width over C-frame mm 3,200
ft-in 10’6”
H Overall length, blade straight mm 6,215
ft-in 20’5”
H1 Overall length, blade angled mm 7,105
ft-in 23’4”
Operating weight1 kg 24,805
lb 54,686
Ground pressure1 kg/cm2 0.82
PSI 11.66
1 Includes coolant, lubricants, full fuel tank, ROPS/FOPS cab, angle blade, operator and track pads standard

PR 744 Litronic 5
Rear attachment

F
F
E
E
F
F

B B

A A

C C
D D

Ripper Parallelogram Ripper Parallelogram


multi-shank multi-shank with hydraulic
pitch adjustment

A Ripping depth (max./min.) mm 749 (449) A Ripping depth (max./min.) mm 749 (449)
ft-in 2’5” (1’6”) ft-in 2’5” (1’6”)
B Lifting height (max./min.) mm 755 (457) B Lifting height (max./min.) mm 759 (459)
ft-in 2’6” (1’6”) ft-in 2’6” (1’6”)
C Overall length, mm 1,586 C Overall length, mm 1,569
attachment raised ft-in 5’2” attachment raised ft-in 5’2”
D Overall length, mm 1,937 D Overall length, mm 1,937
attachment lowered ft-in 6’4” attachment lowered ft-in 6’4”
E Ripper width mm 2,184 E Toolbar width mm 2,184
ft-in 7’2” ft-in 7’2”
F Distance between teeth mm 1,000 F Distance between teeth mm 1,000
ft-in 3’3” ft-in 3’3”
Weight kg 3,295 Max. shank pitch 25°
lb 7,264
Weight kg 3,305
lb 7,286

Drawbar Rigid

A Additional length mm 435


ft-in 1’5”
B Socket pin diameter mm 50
inch 2’’
B C Height of jaw mm 521
ft-in 1’9”
D Ground clearance mm 425
ft-in 1’5”
D C
Jaw opening mm 95
ft-in 4”
A Weight kg 345
lb 780

6 PR 744 Litronic
Equipment
Basic machine S O Undercarriage S O Instruments –
Tow switch • Track frame, closed • indicators S O
Towing hitch rear • Sprocket segments, bolted •
Battery charging •
Towing lug front • Master link, two-piece •
Engine-hour meter •
Forestry equipment • Track shoes with mud hole track pads •
Electronic travel control •
Landfill equipment • Track guide centre part •
Electronic engine control •
Battery compartment, lockable • Tracks oil lubricated •
Speed range •
Filling with environmental-friendly oil • Track guard •
Cooling water temperature •
Filling with oil SAE 30 • Undercarriage, rigid •
Cold start Diesel engine •
Filling with oil SAE 10 • Track frames, oscillating •
Oil level final drives •
Tank guard, complete • Pivot shaft, separate •
Float position blade •
Refuelling pump, electric • Sprocket segments with recesses •
Fuel level •
Belly pans, heavy-duty •
Contamination hydraulic filter •
Cold start device, heating coil •
Contamination air filter •
Radiator, wide-meshed •
Engine oil pressure warning lamp •
Radiator guard, heavy-duty •
Radiator guard, hinged • Electrical S O Oil temperature warning lamp •
Water contamination fuel system •
Liebherr diesel engine • Starter motor 7.8 kW •
Fan, hydraulically driven temp. control • Working lights, front, 6 units (halogen) •
Fan guard • Working lights, rear, 2 units (halogen) •
Engine cover, perforated • Batteries, cold start, 2 units (170 Ah) •
Engine doors, perforated • Battery main switch, mechanical • Hydraulic
Engine doors, hinged, lockable • On-board system 24 V •
Lugs for crane lifting • Alternator 80 A •
system S O

Special paint • Back-up alarm • Hydraulic control ripper •


Fuel water separator • Beacon • Hydraulic control winch •
Fuel water separator with electric Horn • Variable flow pump, load sensing •
heater • Start lock, electronic • Oil filter with strainer in hydraulic tank •
Air filter, dry-type, dual step • Additional lights, rear • Blade quick drop •
Pre-cleaner with automatic dust Control valve for 2 circuits •
ejector • Float position blade •
Toolkit • Hydraulic servo control •
Hydraulic tank oil level control •
Operator’s cab S O

Storage compartment •
Armrest 3D adjustable •
Travel drive S O
Ash tray •
Parking brake, automatic • Pressurised air filter • Attachments S O

Function control, automatic • Operator’s seat, 6-way adjustable • Mounting plate for external tools •
Control, single joystick • Operator’s seat, air-suspended • Drawbar rear, rigid •
Load limit control, electronic • Fire extinguisher • Drawbar rear, swivelling •
Electronic control • Dome light • Counterweight, rear •
Travel control, 3-speed • Coat hook • Ripper, 3 shanks •
Hydrostatic travel drive • Air conditioner • Straight blade •
Inching brake pedal • FM radio • Semi-U blade •
Emergency stop • Radio preinstallation • Angle blade •
Oil cooler • ROPS/FOPS • Winch •
Spure gear with double reduction gear • Rear mirror, inside • Spill plate for blade •
Safety lever • Safety glass, tinted •
Windshield, washer system with
intermittent function •
Windshield wipers front, rear •
Sliding windows, left •
Sliding windows, right •
Protective grids for windows •
Extension, seat back •
Sun visor •
Socket 12 V •
Warm water heating •

Options and/or special attachments, supplied by


S = Standard, O = Option vendors other than Liebherr, are only to be
installed with the knowledge and approval of
Subject to changes. Liebherr to retain warranty.

PR 744 Litronic 7
The Liebherr Group of Companies
Wide product range State-of-the-art technology
The Liebherr Group is one of the largest construction To provide consistent, top quality products, Liebherr
equipment manufacturers in the world. Liebherr’s high- attaches great importance to each product area, its
value products and services enjoy a high reputation in components and core technologies. Important modules
many other fields, too. The wide range includes domes- and components are developed and manufactured in-
tic appliances, aerospace and transportation systems, house, for instance the entire drive and control techno-
machine tools and maritime cranes. logy for construction equipment.

Exceptional customer benefit Worldwide and independent


Every product line provides a complete range of models Hans Liebherr founded the Liebherr family company in
in many different versions. With both its technical excel- 1949. Since that time, the enterprise has steadily grown to
lence and acknowledged quality, Liebherr-products offer a Group of 100 companies with over 22,000 employees
a maximum of customer benefits in practical application. located on all continents. The corporate headquarters of
the Group is Liebherr-International AG in Bulle, Switzerland.
The Liebherr family is the sole owner of the company.

www.liebherr.com

Printed in Germany by Eberl RG-BK-RP LWT/VM 10290895-0.3-10.05

Liebherr-Werk Telfs GmbH


Hans Liebherr-Straße 35, A-6410 Telfs
 +43 5262 6 00-0, Fax +43 5262 6 00-72
www.liebherr.com, E-Mail: lwt.marketing@liebherr.com

Das könnte Ihnen auch gefallen