Beruflich Dokumente
Kultur Dokumente
BD250N, BD250S
Modeion
BD250N, BD250S 3P 4P
COMMERCIAL INFORMATION
Switching units, plug-in device, withdrawable device ........................................................................................E4 Overcurrent releases, switch-disconnector unit ......................................................................................................E6 Connecting sets.............................................................................................................................................................. ............E7 Mounting sets..............................................................................................................................................................................E9 Switches ........................................................................................................................................................................................E10 Shunt trips ...................................................................................................................................................................................E10 Undervoltage releases..........................................................................................................................................................E10 Delay unit .....................................................................................................................................................................................E10 Hand drives..................................................................................................................................................................................E11 Mechanical interlocking and parallel switching....................................................................................................E12 Motor drives ................................................................................................................................................................................E12 Control relay ...............................................................................................................................................................................E12 Accessories ...................................................................................................................................................................................E13
TECHNICAL INFORMATION
Circuit breakers, switch-disconnectors
- specifications ......................................................................................................................................E15 - diagram...............................................................................................................................................E16 - connecting, mounting .........................................................................................................................E18 - deionization spaces .............................................................................................................................E22 - dimensions ..........................................................................................................................................E24
Plug-in device
DTV3 - distribution
- description, specifications, tripping characteristics ...........................................................................E55
MTV8 - motor
- description, specifications, tripping characteristics ...........................................................................E56
- specifications ......................................................................................................................................E19 - specifications, diagram .......................................................................................................................E61 - specifications, diagram .......................................................................................................................E62 - specifications, diagram .......................................................................................................................E63
E2
BD250N, BD250S
Modeion
3P 4P
Block terminals Rear connection Front connection Potential terminals Double block terminals
CS-BD-T011
CS-BD-B011
CS-BD-B012
CS-BD-B021, CS-BD-B022
CS-BD-B014
CS-BD-A021
CS-BD-A011
CS-BD-PS01
HAND DRIVES
RP-BD-CK.. RP-BHD-CP.. RP-BHD-CN.. RP-BHD-CH..
SWITCHING UNIT
BD250SE305 BD250NE305
PLUG-IN DEVICE
ZO-BD-0250-300
WITHDRAWABLE DEVICE
ZV-BD-0250-300
Mechanical interlocking RP-BHD-CB10 Mechanical blocking with Bowden cable MB-BD-PV05 MB-BHD-PV03
MOTOR DRIVES
OD-BHD-KA02
MP-BD-X
SWITCHES PS-BHD-
OD-BHD-PP01 Simple Double Make-and-break Early
SHUNT TRIP
SV-BHD-X
OVERCURRENT RELEASES
SWITCH-DISCONNECTOR UNIT
UNDERVOLTAGE RELEASE
SP-BHD-X SE-BD-....-L001 SE-BD-....-DTV3 SE-BD-0250-V001
ACCESSORIES
Lever with locking Sealing insert
Terminal cover
Insulating barriers
OD-BD-UP01
OD-BD-VP01
OD-BD-VP02
OD-BD-KS03
OD-BHD-KS02
E3
Modeion
SWITCHING UNITS
BD250N, BD250S
Commercial information
3P
Type BD250NE305 BD250SE305 Product code 14414 14415 Iu [A] 250 250 Icu [kA] 36 65 Weight [kg] 2.84 2.84 Package [pc] 1 1
- TECHNICAL INFORMATION, see page E15 - the method of power circuit connection must observe recommendations, see page E18 as well as deionization space, see page E23
- 2 connecting sets CS-BD-A011 - for connecting busbars or cable lugs 1) - insulating barriers OD-BHD-KS02 - mounting bolts set OD-BD-MS01 (4 x M4x35) - conductor holder OD-BD-DV01
must be fitted with - overcurrent release SE-BD- (circuit breaker) or switch-disconnector unit SE-BD-0250-V001 (switch-disconnector)
1)
- for connecting in another way, it is necessary to use CS-BD-... connecting sets, see page E7
PLUG-IN DEVICE
Type ZO-BD-0250-300 Product code 14558 Name Plug-in device Weight [kg] 1.593
3P
Package [pc] 1
- complete accessories for assembly circuit breakers/switchdisconnectors in plug-in design - mounting bolts set OD-BD-MS02 (4 x M4x40) - for affixing switching unit to plug-in device must be fitted with - switching unit BD250..305
- for connecting plug-in device with busbars or cable lugs, connecting sets CS-BD-A011 can be used that are included with the BD250..305 switching unit - for connecting in another way, it is necessary to use CS-BD-... connecting sets, see page E7
WITHDRAWABLE DEVICE
Type ZV-BD-0250-300 Product code 14557 Name Withdrawable device Weight [kg] 2.692
3P
Package [pc] 1
- for connecting withdrawable device with busbars or cable lugs, connecting sets CS-BD-A011 can be used that are included with the BD250..305 switching unit - for connecting in another way, it is necessary to use CS-BD-... connecting sets, see page E7
E4
BD250N, BD250S
Commercial information
Modeion
4P
SWITCHING UNITS
Type BD250NE405 BD250SE405 BD250NE406 BD250SE406 Product code 19571 19573 19572 19574 Iu [A] 250 250 250 250 Icu [kA] 36 65 36 65 3P + N - N-conductor switching 3P + N - N-conductor switching 4P - N-conductor protection 4P - N-conductor protection Weight [kg] 3.7 3.7 3.9 3.9 1 1 1 1
Package [pc]
- TECHNICAL INFORMATION, see page E15 - the method of power circuit connection must observe recommendations, see page E19 as well as deionization space, see page E23
- 2 connecting sets - for connecting busbars or cable lugs 1) - insulating barriers - mounting bolts set OD-BD-MS01 (4 x M4x35) - conductor holder OD-BD-DV01
must be fitted with - overcurrent release SE-BD- (circuit breaker) or switch-disconnector unit SE-BD-0250-V001 (switch-disconnector)
1)
- for connecting in another way, it is necessary to use CS-BD-... connecting sets, see page E7
PLUG-IN DEVICE
Type ZO-BD-0250-400 Product code 20651 Name Plug-in device Weight [kg] 2.1 1
4P
Package [pc]
- complete accessories for assembly circuit breakers/switchdisconnectors in plug-in design - mounting bolts set OD-BD-MS02 (4 x M4x40) - for affixing switching unit to plug-in device
- for connecting plug-in device with busbars or cable lugs, connecting sets can be used that are included with the BD250..40... switching unit- for connecting in another way, it is necessary to use CS-BD-... connecting sets, see page E7
WITHDRAWABLE DEVICE
Type ZV-BD-0250-400 Product code 20652 Name Withdrawable device Weight [kg] 3.2 1
4P
Package [pc]
- for connecting withdrawable device with busbars or cable lugs, connecting sets can be used that are included with the BD250..40... switching unit - for connecting in another way, it is necessary to use CS-BD-... connecting sets, see page E7
E5
Modeion
BD250N, BD250S
Commercial information
OVERCURRENT RELEASES
L001 - characteristic L - lines
protection of lines with low starting currents without Ir setting
In [A] 160 200 250 Type SE-BD-0160-L001 SE-BD-0200-L001 SE-BD-0250-L001 Product code 20612 20666 20613 Description Without Ir setting Without Ir setting Without Ir setting Weight [kg] 0.317 0.317 0.317
3P 4P
Package [pc]1) 1 1 1
OVERCURRENT RELEASES
4D01 - characteristic D - distribution with N-pole protection
protection of lines and transformers in TN-C and TN-S networks
In [A] 100 160 250 Type SE-BD-0100-4D01 SE-BD-0160-4D01 SE-BD-0250-4D01 Product code 33423 33424 33425 Description Ir setting = 40 100 A Ir setting = 63 160 A Ir setting = 100 250 A Weight [kg] 0.327 0.327 0.327
4P
Package [pc] 1 1 1
- TECHNICAL INFORMATION, see page E60 - intended for BD250..406 switching unit
SWITCH-DISCONNECTOR UNIT
Ie [A] 250 Type SE-BD-0250-V001 Product code 24120 Name Switch-disconnector unit Weight [kg] 0.267
3P 4P
Package [pc] 1
E6
BD250N, BD250S
Commercial information
Modeion
3P 4P
CONNECTING SETS
3 terminals
Type CS-BD-T011 Product code Description 24810 Clamp terminals S [mm2] 16 150 Method of connection Cu cables, flexibars Weight [kg] 0.24
Package [set] 1
CS-BD-B011
24751
Block terminals
25 150
Cu/Al cables
0.21
CS-BD-B012
17534
Block terminals
150 240
Cu/Al cables
0.2
CS-BD-B021
Double block 2 x 25 150 Cu/Al cables terminals CS-BD-B022 13808 Double block 2 x 150 240 Cu/Al cables terminals - TECHNICAL INFORMATION, see page 19 - using the OD-BD-KS03 cover the degree of protection IP20 is fulfilled 20119 Block terminals - for 6 cables 6 x 6 35 Cu/Al cables
24752
0.51 0.62
1 1
CS-BD-B014
0.3
CS-BD-A021
24770
Rear connection
0.237
CS-BD-PS01
13682
Potential terminals
0.017
CS-BD-A011
24750
Front connection
0.12
- TECHNICAL INFORMATION, see page E19 - included in every supply of switching units
1 terminal
Type CS-BD-T411 Product code Description 19578 Clamp terminal S [mm2] 16 150 Method of connection Cu cables, flexibars Weight [kg] 0.08 Package [set] 1
CS-BD-B411
19582
Block terminal
25 150
Cu/Al cables
0.07
CS-BD-B412
19577
Block terminal
150 240
Cu/Al cables
0.07
1)
E7
Modeion
CONNECTING SETS
BD250N, BD250S
Commercial information
3P 4P 1 terminal
Type CS-BD-B421 Product code Description 19579 Double block terminal S [mm2] Method of connection Weight [kg] 0.17 Package [pc] 1 2 x 25 150 Cu/Al cables
CS-BD-B422
19580
0.21
CS-BD-B414
21170
6 x 6 35
Cu/Al cables
0.1
CS-BD-A421
19581
Rear connection
0.08
- TECHNICAL INFORMATION, see page E19 CS-BD-PS41 36031 Potential terminal 1.52.5/46 0.005 1
CONNECTING SETS
3 terminals
RETROFIT
Type CS-BD-A037 Product code Description 24772 Reduction for BA...*37-50 - front connection Method of connection Cu/Al busbars, cable lugs, flexibars Weight [kg] 0.3
3P
Package [pc] 1
RETROFIT
CS-BD-A039
24771
0.447
- TECHNICAL INFORMATION, see page E19 - for total replacement of BA *39-50 or J2UX50 circuit breaker with front connection OD-BHD-MS39 connecting set is necessary
RETROFIT
CS-BD-Z039
18201
0.739
- TECHNICAL INFORMATION, see page E19 - for total replacement of BA*39 or J2UX circuit breaker with rear connection OD-BD-MZ39 and CS-BD-A021 connecting sets are necessary
CS-BD-JX75
Reduction for BA...*39-75 and J2UX75 - Cu/Al busbars, cable lugs, 0.558 1 front connection, withdrawable design flexibars - TECHNICAL INFORMATION, see page E19 - for total replacement of BA*39-75 or J2UX75T circuit breakers with front connection in withdrawable design OD-BHD-MS75 connecting set and ZO-BD-0250-300 plug-in device or ZV-BD-0250-300 withdrawable device are necessary
18023
RETROFIT
CS-BD-JT75
RETROFIT
Reduction for J2UX75T - front Cu/Al busbars, cable lugs, 0.711 1 connection, withdrawable design flexibars - TECHNICAL INFORMATION, see page E19 - for total replacement of J2UX75T circuit breaker with front connection in withdrawable design OD-BHD-MS75 connecting set and ZO-BD-0250-300 plug-in device or ZV-BD-0250-300 withdrawable device are necessary
18024
RETROFIT
- sets which enable replacement of older circuit breakers by new ones without switchboard reconstruction
E8
BD250N, BD250S
Commercial information
Modeion
3P
MOUNTING SETS
Type OD-BHD-MS39 Product code Description 24741 Reduction for BA...*39-50 and J2UX50 - front connection Weight [kg] 0.7
Package [set]1) 1
- DIMENSIONS see page E28 - for total replacement of BA *39-50 or J2UX50 circuit breaker with front connection 2 CS-BD-A039 connecting sets are necessary
RETROFIT
OD-BD-MZ39
18203
1.255
- DIMENSIONS see page E28 - for total replacement of BA*39 or J2UX circuit breaker with rear connection 2 connecting sets CS-BD-Z039 and CS-BD-A021 are necessary
RETROFIT
OD-BD-MT75
RETROFIT
- DIMENSIONS see page E34, E38 - for total replacement of J2UX75T circuit breaker with front connection in withdrawable design 2 CS-BD-JT75 connecting sets and ZO-BD-0250-300 plug-in device or ZV-BD-0250-300 withdrawable device are necessary
OD-BHD-MS75
14563
0.446
RETROFIT
- DIMENSIONS see page E34, E37 - for total replacement of BA...*39-75 or J2UX75 circuit breaker with front connection in withdrawable design 2 CS-BD-JX75 connecting sets and ZO-BD-0250-300 plug-in device or ZV-BD-0250-300 withdrawable device are necessary
1)
- one set enables to replace replacing one circuit breaker (set includes coupling elements necessary to assemble circuit breaker and mounting set)
RETROFIT
- sets which enable replacement of older circuit breakers by new ones without switchboard reconstruction
E9
Modeion
SWITCHES
BD250N, BD250S
Commercial information
Double
Type PS-BHD-0200 PS-BHD-0200-Au PS-BHD-1100 PS-BHD-1100-Au PS-BHD-2000 PS-BHD-2000-Au Product code Operating voltage 13690 13693 13691 13694 13689 13692 60 500 V a.c./d.c. 5 60 V a.c./d.c. 60 500 V a.c./d.c. 5 60 V a.c./d.c. 60 500 V a.c./d.c. 5 60 V a.c./d.c. Contacts Weight [kg] 0.026 0.026 0.025 0.025 0.024 0.024 Package [pc] 1 1 1 1 1 1
Make-and-break
Type PS-BHD-0010 PS-BHD-0010-Au PS-BHD-0020 PS-BHD-0020-Au Product code Operating voltage 18021 18022 35 893 37467 60 250 V a.c./d.c. 5 60 V a.c./d.c. 60 250 V a.c./d.c. 5 60 V a.c./d.c. Contacts Weight [kg] 0.013 0.013 0.026 0.026 Package [pc] 1 1 1 1
Early
Type SP-BHD-0002 Product code Description 16169 Early contact Contacts Weight [kg] 0.045 Package [pc] 1
SHUNT TRIPS
Type SV-BHD-X024 SV-BHD-X110 SV-BHD-X230 Product code Operating voltage 24650 24630 24620 24, 40, 48 V a.c./d.c. 110 V a.c./d.c. 230, 400, 500 V a.c./ 220 V d.c. Weight [kg] 0.14 0.14 0.14
3P 4P
Package [pc] 1 1 1
UNDERVOLTAGE RELEASES
Type SP-BHD-X024 SP-BHD-X110 SP-BHD-X230 SP-BHD-X024-0001
1)
3P 4P
Product code Operating voltage 24450 24430 24420 24550 24530 24520 24, 40, 48 V a.c./d.c. 110 V a.c./d.c. 230, 400, 500 V a.c./ 220 V d.c. 24, 40, 48 V a.c./d.c. 110 V a.c./d.c. early contact early contact Description Weight [kg] 0.11 0.11 0.11 0.12 0.12 0.12 Package [pc] 1 1 1 1 1 1
SP-BHD-X110-00011) SP-BHD-X230-00011)
- TECHNICAL INFORMATION, see page E63 1) - cannot be used in combination with MP-BD-X... motor drive
DELAY UNIT
Type BZ-BX-X230-A Product code 36696 Description Enables to delay the undervoltage release tripping of circuit breakers Modeion Weight [kg] 0.12 Package [pc] 1
E10
BD250N, BD250S
Commercial information
Modeion
3P 4P
HAND DRIVES
Type RP-BD-CK10 RP-BD-CK20 Product code Name - description 13651 13652 Hand drive unit Hand drive unit - without locking - with locking Weight [kg] 0.223 0.223
Package [pc] 1 1
- TECHNICAL INFORMATION, see page E65 Hand drive unit must be fitted with: for control on the switching unit - black hand drive lever RP-BHD-CP10 or RP-BHD-CP20 for control through the switchboard door - extension shaft RP-BHD-CH.. - hand drive bearing RP-BHD-CN.. - hand drive lever RP-BHD-CP.. RP-BD-CK21 13684 Hand drive unit - yellow label - with locking 0.223 1
- TECHNICAL INFORMATION, see page E65 Hand drive unit must be fitted with: for control on the switching unit - red hand drive lever RP-BHD-CP21 for control through the switchboard door - extension shaft RP-BHD-CH.. - hand drive bearing RP-BHD-CN.. - hand drive lever RP-BHD-CP..
RP-BD-CK30 RP-BD-CK31
37250 37251
Hand drive unit for right side control Hand drive unit for left side control
0.484 0.484
1 1
RP-BHD-CP10 RP-BHD-CP20
13655 13656
0.075 0.075
1 1
RP-BHD-CP21
13657
- with locking
0.075
RP-BHD-CN40
37246
0.14
- TECHNICAL INFORMATION, see page E65 - is used in combination with the black lever of RP-BHD-CP10, RP-BHD-CP20 hand drive
RP-BHD-CN41
37247
0.14
- TECHNICAL INFORMATION, see page E65 - is used in combination with the red lever of RP-BHD-CP21 hand drive
RP-BHD-CN60
37248
0.14
- TECHNICAL INFORMATION, see page E65 - is used in combination with the black lever of RP-BHD-CP10, RP-BHD-CP20 hand drive
RP-BHD-CN61
37249
0.14
- TECHNICAL INFORMATION, see page E65 - is used in combination with the red lever of RP-BHD-CP21 hand drive
E11
Modeion
HAND DRIVES
BD250N, BD250S
Commercial information
3P 4P
Type RP-BHD-CH10 Product code Name - description 13658 Extension shaft - length 365 mm, can be shortened Weight [kg] 0.205 Package [pc] 1
RP-BHD-CH20
13659
0.255
3P 4P
Package [pc] 1
- TECHNICAL INFORMATION, see page E66 - mechanical interlocking must be fitted with: 2 hand drive units RP-BD-CK.. 2 hand drive levers RP-BHD-CP.. RP-BHD-CD10 18289 Mechanical parallel switching - for fixed design 0.23 1
- TECHNICAL INFORMATION, see page E66 - mechanical parallel switching must be fitted with: 2 hand drive units RP-BD-CK.. hand drive lever RP-BHD-CP..
MB-BD-PV05 MB-BHD-PV03
19612 19613
0.448 0.448
1 1
Mechanical interlocking - for one BD250 and one BH630 circuit breaker - TECHNICAL INFORMATION, see page E66 - mechanical blocking with Bowden cable is intended for fixed, plug-in and withdrawable design
MOTOR DRIVES
Type MP-BD-X0241) MP-BD-X0481) MP-BD-X110 MP-BD-X230 MP-BD-X024-P1) MP-BD-X048-P1) MP-BD-X110-P Product code Name - description 21216 19790 13537 13535 20592 19791 13686 Motor drive Motor drive Motor drive Motor drive Operating voltage 24 V a.c. / d.c. 48 V a.c. / d.c. 110 V a.c. / d.c. 230 V a.c. / 220 V d.c. Weight [kg] 1.529 1.529 1.529 1.529 1.546 1.546 1.546 1.546
3P 4P
Package [pc] 1 1 1 1 1 1 1 1
Motor drive - with counter of cycles 24 V a.c. / d.c. Motor drive - with counter of cycles 48 V a.c. / d.c. Motor drive - with counter of cycles 110 V a.c. / d.c.
MP-BD-X230-P 13538 Motor drive - with counter of cycles 230 V a.c. / 220 V d.c. - TECHNICAL INFORMATION, see page E68 - motor drive cannot be used in combination with SP-BHD-X...-0001 1) - custom production OD-BHD-PP01 13688 Counter of cycles - cable length 1.1 m - DIMENSIONS, see page E30 - upon agreement with the manufacturer, different conductor lengths can be supplied OD-BHD-KA02 13809 Extension cable - to motor drive 12 wires, length 0.6 m
0.08
0.1
- TECHNICAL INFORMATION, see page E68 - upon agreement with the manufacturer, different conductor lengths can be supplied
CONTROL RELAY
Type OD-BHD-RX01 OD-BHD-RX02 OD-BHD-RA03 OD-BHD-RD04 Product code Specifications 37425 37426 37427 37428 24 V a.c./d.c. 48 V a.c./d.c. 110 230 V a.c. 110 V d.c. Weight [kg] 0.06 0.06 0.06 0.06 Package [pc] 1 1 1 1
E12
BD250N, BD250S
Commercial information
Modeion
3P 4P
ACCESSORIES
Type OD-BHD-KS02 OD-BHD-KS42 Product code Name - description 24740 19575 Insulating barriers - set (two pieces), for 3P and 4P design Insulating barrier - one piece, for 4P design Weight [kg] 0.077 0.039
Package [pc] 1 1
- included with each switching unit order - in case circuit breaker/switch-disconnector connection is reversed (supply to terminals 2, 4, 6) it is necessary in most cases to install these barriers also on the lower side - for more detailed information see page E22 OD-BD-KS03 OD-BD-KS43 13534 19576 Terminal cover - degree of protection IP20, for 3-pole design Terminal cover - degree of protection IP20, for 4-pole design 0.098 0.141 1 1
- increases degree of protection of connection point to IP20 when using CS-BD-B012, B021, B022 and B014 block type terminals - intended for fixed, plug-in and withdrawable design
OD-BD-UP01
13533
0.009
- enables to lock the circuit breaker inswitched off manually position (loaded) - locking is possible using padlock with shank diameter 4 6 mm
15328
0.001
- cover of cavities - terminal cover - overcurrent release - hand drive unit - motor drive
OD-BD-VP02
18215
0.08
- enables sealing for overcurrent release setting e.g. circuit breakers in the main meter switchboard
OD-BHD-KA01
14555
Connecting cable - to connect the circuit breaker/switchdisconnector accessories in the plug-in/withdrawable design - 15 wires (it is possible for plug-in design and fixed design)
0.12
SO-BHD-0010
14560
Signalling of position - signals circuit breaker position in the plug-in or withdrawable device
0.018
OD-BD-KK01
14559
Keying set - prevents inserting of another switching unit to the plug-in or withdrawable device
0.002
OD-BHD-KT01
14642
0.002
E13
Modeion
NOTES
BD250N, BD250S
Commercial information
E14
BD250N, BD250S
Technical information
Modeion
3P 4P
CIRCUIT BREAKER
BD250N, BD250S 105/140 x 225 x 105 + 43 mm 3 kg/4 kg EN 60 947-2, IEC 947-2
SWITCH-DISCONNECTOR
105/140 x 225 x 105 + 43 mm 3 kg/4 kg EN 60 947-3, IEC 947-3
Circuit breaker
3, 4 100, 160, 200, 250 A 250 A max. 690 V a.c. 50/60 Hz 8 kV 690 V A 2.5 kA/1 s NORMAL BD250N 60 kA 36 kA 16 kA 10 kA 30 kA 18 kA 8 kA 5 kA 75 kA SUPERIOR Ue BD250S 100 kA 230 V a.c. 65 kA 415 V a.c. 25 kA 500 V a.c. 13 kA 690 V a.c. 50 kA 230 V a.c. 36 kA 415 V a.c. 13 kA 500 V a.c. 8 kA 690 V a.c. 140 kA 415 V a.c. 10 ms 18 W/25 W 30 000 cycles 3 000 cycles 120 cycles/hr 80 N IP40 IP20
3, 4 250 A 250 A max. 690 V a.c. max. 440 V d.c. 50/60 Hz 8 kV 690 V AC-23B DC-23B 3 kA/5 s -
Icu
Ics
4 kA/ 415 V a.c. 4 kA/ 440 V d.c. 18 W/25 W 30 000 cycles 3 000 cycles 120 cycles/hr 80 N IP40 IP20 40 C -40 C +55 C dry and tropical climate EN 60068 3 2000 m 3g ( 8 50 ) Hz / / / / / / / / / / /
Rated short-circuit making capacity (peak value) Switching off time at Icu Losses per 1 pole fixed/withdrawable design Mechanical endurance Electrical endurance Switching frequency Control force Degree of protection from front side of the device Degree of protection of terminals Operating conditions Reference ambient temperature Ambient temperature range Working environment Climatic resistance Pollution degree Max. sea level Seismic resistance Design modifications Front/rear connections Plug-in design 3P/4P Withdrawable design 3P/4P Accessories Switches - auxiliary/relative/signal/early Shunt trip Undervoltage release / with early switch Front hand drive / with adjustable lever Mechanical interlocking-with Bowden cable / for hand drive Motor drive/with counter of cycles Lever with locking Bolt sealing insert/additional cover for overcurrent release
Icm / Ue
Switch-disconnector
Dimensions
Load
available, unavailable, + being prepared 1) - in case circuit breaker connection is reversed (input terminals 2, 4, 6, output terminals 1, 3, 5) Icu does not change - protection of Modeion switch-disconnectors, see page R
E15
Modeion
BD250N, BD250S
Technical information
3P
Q3 L+
ON S OF F B 2 4
SO 1
ZO-BD ZV -BD
10 .Y 1
A1
10 .Y 1
10 .Y 3
A1
B1
1 SE-BD
X3
SP-BHD-X...-0001
S5
C
SP-BHD-X...
NC
NO
SV -BHD-X...
SP-BHD-0002
or
or
or
Q V T1 TEST T2 T3 B
MP 10 .Y 2 10 .Y 2 10 .Y 4
A2
X3
X4
B2
A2
PE
N1
Po. cykl Cycle counter
SO 2 4 2 1
SO 3 4 2
ZO-BD ZV -BD 2 4 6
10
11
12
13
14
15
X2
nvstn signal
relativn relative
pomocn auxiliary
A PS-BHD-0100 PS-BHD-1000
or
or
2. 2
2. 1
PS-BHD-1100
PS-BHD-2000
3. 1
2. 4
3. 4
2. 2
2. 2
PS-BHD-0200
or
or
or
or
or
or
or
or
X1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Propojovac kabel Connecting cable
motor drive - MP-BD-X... motor storage device connector for connection of control circuits connector for external counter of cycles switch to indicate AUTO (NO-C) / MANUAL (NC-C) modes external counter of cycles - OD-BHD-PP01 recommended wiring of the control circuits - it is not a part of motor drive switch on button switch off button switch for energy storage (switched on = automatic storage, switch may be continuously switched on) Q3 motor drive circuit breaker - see page E69 J switching unit - BD250..305 Q main contacts T1, T2, T3, T41) current transformers V trip-free mechanism circuit breaker - overcurrent release - SE-BD-....-.... switch-disconnector SE-BD2) - switch-disconnector unit - SE-BD-0250-V001 TEST push button to test release ZO-BD plug-in device - ZO-BD-0250-300 ZV-BD withdrawable device - ZV-BD-0250-300 X1, X2 connecting cable - OD-BHD-KA01 SO1, SO2, SO3 contacts signalling circuit breaker/switch-disconnector position in plug-in or withdrawable device SO-BHD-0010 - for more detailed information see page E50, E52 SP-BHD-X... undervoltage release SV-BHD-X... shunt trip SP-BHD-X...-0001 undervoltage release with early contact SP-BHD-0002 early contact
1)
PS-BHD-0010
MP M P X3 X4 S5 YC B ON OFF S
1. 1
1. 2
1. 4
1. 3
3. 1
2. 1
2. 1
2. 3
3. 3
2. 3
3. 3
2. 2 2. 4
3. 2
3. 4
3. 3
2. 1
3. 1
2.1
1. 2
2. 4
3. 4
1. 4
1. 1
3. 2
3. 4
3. 2
3.1
E16
BD250N, BD250S
Technical information
Modeion
4P
Q3 L+
ON S OF F B 2 4
SO 1
ZO-BD ZV -BD
10 .Y 1
A1
10 .Y 1
10 .Y 3
A1
B1
N SE-BD
X3
SP-BHD-X...-0001
S5
C
SP-BHD-X...
NC
NO
SV -BHD-X...
SP-BHD-0002
or
or
or
Q V T1 TEST T2 T3 T4 1) B
MP 10 .Y 2 10 .Y 2 10 .Y 4
A2
X3
X4
B2
A2
PE
N1
Po. cykl Cycle counter
SO 2 4 2 1
SO 3 4 2
ZO-BD ZV -BD N 2 4 6
10
11
12
13
14
15
X2
pomocn auxiliary
pomocn auxiliary
pomocn auxiliary
1. 1
1. 2
1. 4
2. 1
1. 3
2. 1
3. 3
2. 1
3. 1
2. 3
4. 3
4. 1
5. 1
3. 1
3. 3
2. 3
3. 3
5. 3
6. 3
6. 1
4. 2 4. 4
2. 2 2. 4
3. 2
5. 2
6. 2 PS-BHD-0100
3. 4
or
or
B PS-BHD-1000 PS-BHD-0100 PS-BHD-0100 PS-BHD-1000 PS-BHD-0100 PS-BHD-0010 PS-BHD-1000 PS-BHD-0100 PS-BHD-1000 PS-BHD-1000 PS-BHD-0010 PS-BHD-0010 PS-BHD-0020 PS-BHD-0010 PS-BHD-0010
PS-BHD-0010
PS-BHD-0100
PS-BHD-1000
PS-BHD-1100
PS-BHD-2000
PS-BHD-0200
or
or
or
or
or
or
or
or
or
or
or
5. 4
or
or
2. 2
2. 1
2. 2
4. 2
4. 1
3. 1
2. 4
3. 4
2. 2
5. 4
5. 1
2. 4
3. 4
1. 2
1. 4
1. 1
3. 2
4. 4
6. 4
3. 2
3. 4
5. 2
X1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Propojovac kabel Connecting cable
6. 2
6. 1
2.1
3.1
6. 4
E17
Modeion
BD250N, BD250S
Technical information
3P 4P
3 PS-BHD-0010 1 1 0 0 1 0 0 0 0 1 1 1 25 x 2 25 x 3 25 x 4 25 x 5 25 x 6
Switched on Switched off manually or by motor drive electrically (loaded state) Switched off by overcurrent release Switched off from switched on state: by auxiliary release, or by TEST push button or by the switch off button on the motor drive note: 0 - contact open, 1 - contact closed
1 0 0 0
1 1 0 1
0 0 1 0
0 0 1 1
1 1 0 0
1 0 0 0
0 1 1 1
1 0 0 0
0 1 1 1
1)
1 0 0 0
1 0 0 0
0 1 1 1
1 0 0 0
0 1 1 1
0 1 1 1
1 1 0 1
0 0 1 0
0 0 1 1
- it is necessary to follow the relevant valid standards when cables are designed
Ik 65 kA
E18
BD250N, BD250S
Technical information
Modeion
3P 4P
Busbars and cable Dimensional lugs W x H [mm] drawing 3P/4P CS-BD-A011 CS-BD-A021 CS-BD-B421 CS-BD-T011 CS-BD-T411 CS-BD-B011 CS-BD-B411 CS-BD-B012 CS-BD-B412 CS-BD-B021 CS-BD-B421 CS-BD-B022 CS-BD-B422 CS-BD-B014 CS-BD-B414 CS-BD-A037 CS-BD-A039 CS-BD-Z039 CS-BD-JX75 CS-BD-JT75 CS-BD-PS01 CS-BD-PS41 250 250 250 250 250 250 250 250 250 250 250 250 250 10/16 10/16 16 150 Cu 25 150 Cu / Al 150 240 Cu / Al 2 x ( 25 150 ) Cu / Al 2 x ( 150 240 ) Cu / Al 6 x ( 6 35 ) Cu / Al 10 150 Cu 16 150 Cu /Al 120 240 Cu / Al 2 x ( 16 150 ) Cu / Al 2 x ( 120 240 ) Cu / Al 6 x ( 6 35 ) Cu / Al 16 150 Cu 25 150 Cu / Al 150 240 Cu / Al 2 x ( 25 150 ) Cu / Al 2 x ( 150 240 ) Cu / Al 6 x ( 6 35 ) Cu / Al 10 150 Cu 16 150 Cu / Al 120 240 Cu / Al 2 x ( 16 150 ) Cu / Al 2 x ( 120 240 ) Cu / Al 6 x ( 6 35 ) Cu / Al page E24, E39 page E25, E40 page E26, E40 page E26, E41 page E27 page E28 page E28 page E34, E38 25 x ... 25 x ... page E27, E41
RETROFIT - reduction for BA*37 circuit breaker with front connection RETROFIT - reduction for BA*39 and J2UX circuit breakers with front connection RETROFIT - reduction for BA*39 and J2UX circuit breakers with rear connection RETROFIT - reduction for BA...39-75 and J2UX75 circuit breakers with front connection in withdrawable design RETROFIT - reduction for J2UX75T circuit breaker with front connection in withdrawable design 1.5 2.5 / 4 6 Cu flexible conductor 1.5 2.5/4 6 Cu flexible conductor
RETROFIT - sets which enable replacement of older circuit breakers by new ones without switchboard reconstruction
CS-BD-A011 OD-BHD-KS02
25
.5 12
CS-BD-A021
2.
Click !
3.
7.
6.
BD250...
BD250...
1. 3.
1.
3.
193
M8
4.
2.
4.
12.5
5. 8.
5.
6.
15 Nm ...
15 Nm ...
9.
0.8 Nm
6
7.
0.8 Nm
E19
Modeion
BD250N, BD250S
Technical information
3P 4P
CS-BD-B011
OD-BHD-KS02
OD-BHD-KS02
7.
6.
BD250...
8.
BD250...
F
7.
3.
173
2.
4.
Click !
3.
Click !
2.
15 Nm ...
1.
6 mm
173
1.
8. 5. 4. 9.
20
6. 5.
20
6 mm 6 mm
5 mm 5 mm
10.
0.8 Nm
25
0.8 Nm
OD-BHD-KS02
or OD-BD-KS03
8.
CS-BD-B012
2.
25
9.
OD-BHD-KS02
or
Click !
CS-BD-B021
2.
IP20
3.
8.
OD-BD-KS03 IP20
Click !
3.
BD250...
F
9.
10.
BD250...
F
8.
5.
10.
8.
5.
15 Nm ...
6
1.
9.
15 Nm ...
6
1.
M8
4.
M8
4.
273
7.
7. 6.
8m m
25
6.
30
301
6 mm 6 mm
F
0.8 Nm
8.
8m m
11.
0.8 Nm
8.
11.
E20
BD250N, BD250S
Technical information
Modeion
3P 4P
OD-BHD-KS02
or
CS-BD-B014
CS-BD-A011
2.
Click !
OD-BD-KS03 IP20
OD-BHD-KS02
or
3.
8.
F
8.
5.
10.
6.
OD-BD-KS03 IP20
2.
Click !
3.
BD250...
7. 8.
F
9.
6.
CS-BD-B014 15 Nm ... 6
M8
1.
1.
M8
4.
25
287
4.
13
5.
8.5
7. 6.
37.5
15 Nm ...
4 mm 4 mm
9.
26
14.5
F
0.8 Nm
8.
6.
11.
0.8 Nm
OD-BHD-KS02
Click !
3.
BD250...
7.
6.
BD250...
7.
6.
1.
1.
M8
M8
4.
4.
273
308
1 1
15 Nm ...
8.
6
1 1
15 Nm ...
8.
6
50 50
5.
25
70 70 44
5.
9.
9.
0.8 Nm
0.8 Nm
22
E21
Modeion
BD250N, BD250S
Technical information
3P 4P
70
15 Nm
CS-BD-A021
2. 1.
CS-BD-Z039
15 Nm ...
BD250...
3.
5. 4.
15 Nm ...
6.
0.8 Nm
Deionization spaces
USE OF INSULATING BARRIERS AND TERMINAL COVERS WITH CIRCUIT BREAKERS AND SWITCH-DISCONNECTORS
FIXED DESIGN - front connection - terminals 1, 3, 5 (upper side) a) if Ue 415 V a.c., it is necessary to use OD-BHD-KS02 insulating barriers or OD-BHD-KS03 terminal cover b) if insulated conductors are not used for connecting power circuit to terminals 1, 3, 5, flexibars or rear connection, it is necessary to use OD-BHD-KS02 insulating barriers or OD-BHD-KS03 terminal cover - terminals 2, 4, 6 (lower side) Only in case that circuit breaker/switch-disconnector is connected to the source using terminals 2, 4, 6 and at the same time: a) Ue 415 V a.c., it is necessary to use OD-BHD-KS02 insulating barriers or OD-BHD-KS03 terminal cover b) insulated conductors are not used for connecting power circuit to terminals 2, 4, 6, flexibars or rear connection, it is necessary to use OD-BHD-KS02 insulating barriers or OD-BHD-KS03 terminal cover - rear connection PLUG-IN AND WITHDRAWABLE DEVICE - insulating barriers and terminal covers need not be used - insulating barriers and terminal covers need not be used
E22
MAX. 20
BD250N, BD250S
Technical information
Modeion
3P 4P
Aminimum distance between the circuit breaker/ switch-disconnector and uninsulated earthed wall (applicable for connection using insulated conductors, cables, flexibars or with rear connection) A1minimum insulation length of bare conductors (using OD-BHD-KS02 insulating barriers from 100 mm to max. 150 mm, or by adding additional insulation for the conductors with barriers to obtain at least A1 value)
A2
100-150
A1
F=0
G=0
A2minimum distance: - between the circuit breaker/switch-disconnector and uninsulated earthed wall (applicable for uninsulated conductors and busbars) - between the circuit breaker/switch-disconnector and busbar - between two circuit breakers/switch-disconnectors situated vertically above one another - between uninsulated connections of two circuit breakers/switch-disconnectors above one another C, D, E, F, Gminimum distance between the circuit breaker/switch-disconnector and uninsulated earthed wall Hminimum distance between uninsulated conductors minimum distance of circuit breakers without using of uninsulated barriers is 50 mm
Busbar
> 15 mm
max.3 mm
Cable
20
225
max.3 mm
Flexibar
When insulating conductors, cables, flexibars or rear connection are used up to U <= 415 V a.c., it is not necessary to use OD-BHD-KS02 insulating barriers.
[V] [kA] [kA] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
230 100 60 50 100 200 50 100 150 50 100 150 50 150 250 50 150 200 50 150 200 > 36 65
E23
Modeion
BD250N, BD250S
Technical information
3P
Drilling diagram
25 18
35 48 60
100
26 17
213
193
167
154
162
225
65
29,5 29.5
R88
35.5 35,5
4x 4x 5 5 .,5 5
20 105 117 5 35 35
121
16 26
105
35
225
193
273
248
162
335
30
223
22
E24
31.5 31,5
162
5 8.,5
BD250N, BD250S
Technical information
Modeion
3P
35
193
301
281
244
225
335
25
18 18
162
224
261
E25
Modeion
BD250N, BD250S
Technical information
3P
35
319
294
248
225
193
162
335
219
30
22 22
35
287
269
246
225
223
193
162
335
213
269 259
11 25
E26
BD250N, BD250S
Technical information
Modeion
3P
Drilling diagram
98 35
21
35 48
4x 5 .,5
65
193
154
162
193
225
162
1,5 1.5
16
R6
28
105
16
36
35
RETROFIT
29
35
273
193
162
1 1
12,5 12.5 32 32
36,5 36.5
225
24
193
225
,5 8.5 5
E27
Modeion
BD250N, BD250S
Technical information
3P
RETROFIT
25
35
308
193
162
360
105
25
1 1
1 1
15
32
32
81,5 81.5
225
Fixed design, rear connection (connecting set CS-BD-Z039, mounting set OD-BD-MZ39)
210 70 4 29,5 29.5 8 3
RETROFIT
7
11 12
70
140
105
36
225
395
360
46
105 70
E28
25
307
25
15
32
4x
BD250N, BD250S
Technical information
Modeion
3P
133
50
37
50
90
25
140
70
133
50
37
25
4x
SWITCHBOARD DOOR HINGE
6.5
50
55
55
E29
Modeion
BD250N, BD250S
Technical information
3P
45
163
Fixed design, hand drive - control on left side, with adjustable lever
105 SWITCHBOARD PANEL RP-BD-CK31 RP-BHD-CN.. RP-BHD-CP.. 70
RP-BHD-CH... 133
BD250...
45
50 71 88 400 (CH10) 276 465 (CH20) 163
90
R m ax
27
195
247
E30
82
138
14
BD250N, BD250S
Technical information
Modeion
3P
Drilling diagram
5 55 5,. 4x 4x
55 5,.5 4x 4x
35
290
278
258
232
140
162
193
227
145
290
20 75 75 26 31.5 31,5
140
16 26
20 35
35
35
35
35
105
105
105
400
31.5 31,5
227
5 ,.5 8 8
E31
Modeion
BD250N, BD250S
Technical information
3P
Drilling diagram
21
258
140
290
258
8,5 7.5
52
21
227
R6
4x 5 , .5
5 ,.5 5 5 4x 4x
45
16
28
75
16
Plug-in design
182 105 105
290
140 157
E32
31,5 31.5
36
28
1,5 1.5
35
35
35
35
258
5 , 8.5
BD250N, BD250S
Technical information
Modeion
3P
175
E33
Modeion
BD250N, BD250S
Technical information
3P
RETROFIT
70
70
10
20
25
4x
483
433
180
25 160
106,5 106.5
290
106,5 106.5
RETROFIT
25
4x
180
151,5
578
528
25 160
E34
154
290
154
BD250N, BD250S
Technical information
Modeion
3P
Drilling diagram
4x
,5
4x
145
,5
35
193
140
227
140
290
278
258
232
162
290
20 75 75 26 31.5 31,5
16 26
20 35
35
35
105
105
130
105
400
140
179
140
27,5 27.5
31,5
227
5 ,.5 8
E35
Modeion
BD250N, BD250S
Technical information
3P
74.9 74,9
65
290
140
180
140
75
140 157
170 187
Working position
Inspection position
255 225 30
75,2 75.2
140
175
140
75
205
E36
BD250N, BD250S
Technical information
Modeion
3P
31
75
140
RETROFIT
10
70
70
20
25
106.5 106,5
483
433
180
25 160
106.5 106,5
290
140
75
140
75
1 2x 0
5 4x
E37
Modeion
BD250N, BD250S
Technical information
3P
RETROFIT
2x
1 1
70
70
20
25
4x
151.5 151,5
154
578
528
180
25 160
7,5 7.5
154
290
140
75
52
21
140
258
,5 . 5 4x
45
16
17
37
28
35
35
E38
75
258
, 8.5 8
BD250N, BD250S
Technical information
Modeion
4P
Drilling diagram
25 18
35 48 60
26 17
213
193
167
154
162
225
65
29,5 29.5
R88
121
5 .,5 5 5 4x 4x
35,5 35.5
16 26
20 140
105 117 5
70
35
35
35
35
35
35
273
248
225
193
162
335
140
30
223
22
31.5 31,5
162
,5 .5 8
E39
Modeion
BD250N, BD250S
Technical information
4P
35
301
281
244
225
193
162
140
25
18 18
35
248
225
193
162
319
294
335
335
219
224
30
22 22
E40
269
261
BD250N, BD250S
Technical information
Modeion
4P
35
213
287
269
246
223
193
162
225
140
25
11
335
259
Drilling diagram
133 35
35 48
65
21
162
154
162
225
193
16
140
16
36
28
1,5 1.5
.,5 5 4x
35
193
225
,5 . 8
E41
Modeion
BD250N, BD250S
Technical information
4P
133
50
37
50
90
25
140
70
133
50
37
90
25
4x
SWITCHBOARD DOOR HINGE
6.5
50
55
E42
55
BD250N, BD250S
Technical information
Modeion
4P
R m ax
27
195
140
247
Plug-in device
82
138
Drilling diagram
25 35 35 35 18
14
,5 . 5 4x
35
140
162
193
227
145
4x 4x 5 5 .,5 5
290
278
258
232
290
20 75 75 26 31,5 31.5
140
16 26
20 35 140 105
35
35
35
35
E43
31,5 31.5
227
5 ,.5 8 8
Modeion
BD250N, BD250S
Technical information
4P
105
Plug-in design
182 140 105
290
400
140 157
E44
BD250N, BD250S
Technical information
Modeion
4P
Drilling diagram
140 2 35
258
52
140 45
290
4x 5 , .5
16
16
36 2
28
35
35
75
258
8,5 8.
E45
Modeion
BD250N, BD250S
Technical information
4P
290
175
140
E46
290
BD250N, BD250S
Technical information
Modeion
4P
Drilling diagram
214 35 35
.,5 5 4x
35
145
5 ,.5 5 5 4x 4x
290
290
278
258
232
140
162
193
227
16 26
20 35 140 215
130
105
400
140
140
227
E47
140
8,5 8 .
Modeion
BD250N, BD250S
Technical information
4P
74,9
65
140
290
215
140
75
140 157
170 187
Drilling diagram
133
65
21
258
52
290
45
16
17
28
E48
215
37
35
35
75
140
5 .,5 5 4 4x
,5 . 8
BD250N, BD250S
Technical information
Modeion
4P
Working position
Inspection position
255
75,2
65
290
215
140
175
140
75
205
Working position
282
31
65
290
140
75
Inspection position
312 30 31
215
140
75
E49
Modeion
PLUG-IN DEVICE
BD250N, BD250S
Technical information
3P 4P
Plug-in device
Description
Plug-in design of the circuit breaker/switch-disconnector is intended for demanding industrial applications where rapid exchange of the circuit breaker along with both visual and conductive disconnection of the circuit are needed. plug-in device includes complete accessories for assembling circuit breaker/switch-disconnector in plugin design from the originally fixed design components of the plug-in device are: - base of the plug-in device - 2 connecting sets (total of 6 terminals) - for fitting onto the switching unit - interlocking connecting rod (ensures automatic switching off of the circuit breaker for handling inserting and removal) - set of mounting bolts - for affixing circuit breaker to plug-in device (set of mounting bolts is used to fasten the plug-in device into the switchboard, that is included in delivery of switching unit) Circuit breaker positions Circuit breaker in plug-in design has two positions: 1. inserted (working position) 2. removed Power circuit - connecting set CS-BD-A011 is used for connecting with busbars or cable lugs, that is included in delivery of switching unit BD250... - for connecting in another way, it is necessary to use connecting sets, see page E7 - connection must comply with our recommendations, see page E18 Signalling of position SO-BHD-0010 Plug-in device may be fitted with a maximum of four switches (for 4-pole design, max. 6 switches) for signalling the inserted/removed position. Keying set OD-BD-KK01 Plug-in device and circuit breaker can be fitted with keying set, which prevents inserting any other circuit breaker into the plugin device. Circuit breaker accessories in plug-in design Circuit breaker in plug-in design has the same accessories as the fixed circuit breaker. Advantages and enhanced safety for operator: unambiguous remote signalling of the circuit breaker position option to lock plug-in device with padlocks to prevent inserting of circuit breaker visible and conductive disconnection of the power circuit easy exchange of circuit breakers in case of failure IP20 degree of protection of all termination points plug-in device does not need earthing
Circuit breaker 2 4 position Inserted 0 1 Removed 1 0 note: 0 - contact open, 1 - contact closed 1) - cavities 19 and 20 are only for 4-pole design Position of cavities for switch SO-BHD-0010 in plug-in device
Specifications SO-BHD-0010
Type Rated operating voltage Ue Ui fn Ie / Ue AC-13 Ie / Ue DC-15 Ith SO-BHD-0010 400 V a.c. 250 V d.c. 500 V a.c. 50/60 Hz 3 A /400 V a.c. 0.15 A /250 V d.c., 0.3 A /125 V d.c., 4 A /30 V d.c. 6A 001 0.5 1 mm2 IP20
Thermal current Arrangement of contacts Connection cross-section S Degree of protection of terminals (connected switch)
For wiring diagram of circuit breaker in plug-in device with accessories see page E16.
E50
BD250N, BD250S
Technical information
Modeion
3P 4P
PLUG-IN DEVICE
Recommended circuit breaker manipulation
During the manipulation with circuit breaker in plug-in design with motor drive, the circuit breaker may reach the state, in which the first attempt at switching on by motor drive is unsuccessful. Switching on is executed after repeated make impulse. To avoid this eff ect, some of the following steps may be done: 1) To keep the process of manipulation with the circuit breaker, see Recommended circuit breaker manipulation below 2) To connect OD-BHD-R control relay into the motor drive circuit according to wiring diagram, see page E72
Circuit breaker in plug-in design with motor drive
Recommended process of manipulation After every manipulation with circuit breaker in plug-in design it is necessary to accomplish the operations in following sequence, after repeated insertion into the plug-in device: 1) press the switch off button (red) on the motor drive, see Fig. 2) press the switch on button (green) on the motor drive, see Fig.
Changes in states of switches in cavities of switching unit at removal of the circuit breaker
State of circuit breaker befor removing State of switches before removing - inserted position Cavity PS-BHD-1000 Circuit breaker lever position State of the main contacts 1 PS-BHD-0100 PS-BHD-1000 2 PS-BHD-0100 3 (4, 5, 6) PS-BHD-1000
1)
State of switches after removing - withdrawn position 1 PS-BHD-1000 PS-BHD-0100 PS-BHD-1000 2 PS-BHD-0100 3 (4, 5, 6)1) PS-BHD-1000
4 3
PS-BHD-0100
Switched on Switched off manually or by motor drive electrically (loaded state) Switched off by overcurrent release Switched off from switched on state: by auxiliary release, or by TEST push button or by the switch off button on the motor drive note: 0 - contact open, 1 - contact closed 1) - cavities 4, 5, 6 are only for 4-pole design
1 0 0
1 1 0
0 0 1
0 0 1
1 1 0
1 0 0
0 1 1
1 1 0
0 0 1
1 1 1
0 0 0
0 0 0
E51
PS-BHD-0100 1 1 1 1
Modeion
WITHDRAWABLE DEVICE
BD250N, BD250S
Technical information
3P 4P Description
Withdrawable design of the circuit breaker/switchdisconnector is intended for demanding industrial applications where rapid exchange of the circuit breaker, frequent checking and both visual and conductive disconnection of the circuit are needed. withdrawable device includes complete accessories for assembling circuit breaker/switch-disconnector in withdrawable design from the originally fixed design components of the withdrawable device are: - base of the withdrawable device - 2 movable side plates - 2 connecting sets (total of 6 terminals) - for fitting onto the switching unit - interlocking connecting rod (ensures automatic switching off of the circuit breaker for handling inserting and withdrawing) - set of mounting bolts is used to fasten the withdrawable device into the switchboard, that is included in delivery of switching unit Circuit breaker positions Circuit breaker in withdrawable design has three positions: 1. inserted (working position) 2. withdrawn (inspection position) 3. removed Keying set OD-BD-KK01 Withdrawable device and circuit breaker can be fitted with keying set, which prevents inserting any other circuit breaker into the withdrawable device. States of switches SO-BHD-0010 in withdrawable device according to circuit breaker and arrestment positions
Cavity 11, 12, 13, 14 15, 17 16, 18 (19, 20)1) (19, 20)1)
1 1 1
Withdrawable device
Signalling of position SO-BHD-0010 Withdrawable device can be fitted with the switches for signalling the position of the circuit breaker inserted/ withdrawn/removed. Power circuit - connecting set CS-BD-A011 is used for connecting with busbars or cable lugs, that is included in delivery of switching unit BD250.. - for connecting in another way, it is necessary to use connecting sets, see page 10 - connection must comply with our recommendations, see page 19 Auxiliary circuits These are connected using 15-wire OD-BHD-KA01 cable. Circuit breaker accessories in withdrawable design Circuit breaker in withdrawable design has the same accessories as fixed circuit breaker. Advantages and enhanced safety for operator: unambiguous remote and local signalling of the circuit breaker and arrestment positions checking of circuit breaker and accessories function in the inspection position locking withdrawable device against inserting circuit breaker, locking of circuit breaker in inserted (operating) position, locking of circuit breaker in withdrawn (checking) position - locking by means of padlocks visible and conductive disconnection of the power circuit easy exchange of circuit breakers in case of failure IP20 degree of protection of all termination points withdrawable device does not need earthing
Circuit breaker and 2 4 2 4 2 4 arrestment position Inserted and not arrested 0 1 1 0 0 1 Inserted and arrested 0 1 1 0 1 0 Withdrawn and not arrested 1 0 0 1 0 1 Withdrawn and arrested 1 0 0 1 1 0 Removed and not arrested 1 0 1 0 0 1 Removed and arrested 1 0 1 0 1 0 note: 0 - contact open, 1 - contact closed - operating state is always in arrested position - in arrested position it is possible to lock the withdrawable device (for more information, seeAdvantages and enhanced safety for operator) 1) - cavities 19 and 20 are only for 4-pole design
Specifications SO-BHD-0010
Type Rated operating voltage Ue Ui fn Ie / Ue AC-13 Ie / Ue DC-15 Ith SO-BHD-0010 400 V a.c. 250 V d.c. 500 V a.c. 50/60 Hz 3 A /400 V a.c. 0.15 A /250 V d.c., 0.3 A /125 V d.c., 4 A /30 V d.c. 6A 001 0.5 1 mm2 IP20
15, 17 Rated insulation voltage Rated frequency Rated operating current Keying set OD-BD-KK01 11, 12, 13, 14
Thermal current Arrangement of contacts Connection cross-section S Degree of protection of terminals (connected switch)
16, 18
For wiring diagram of circuit breaker in withdrawable device with accessories see page E16.
E52
BD250N, BD250S
Technical information
Modeion
3P 4P
WITHDRAWABLE DEVICE
Recommended circuit breaker manipulation
During the manipulation with circuit breaker in withdrawable design with motor drive, the circuit breaker may reach the state, in which the first attempt at switching on by motor drive is unsuccessful. Switching on is executed after repeated make impulse. To avoid this effect, some of the following steps may be done: 1) To keep the process of manipulation with the circuit breaker, seeRecommended circuit breaker manipulation below 2) To connect OD-BHD-R control relay into the motor drive circuit according to wiring diagram, see page E72
Circuit breaker in withdrawable design with motor drive
Recommended process of manipulation After every manipulation with circuit breaker in withdrawable design is necessary to accomplish the operations in following sequence, after repeated insertion into the plug-in device: 1) press the switch off button (red) on the motor drive, see Fig. 2) press the switch on button (green) on the motor drive, see Fig.
Changes in states of switches in cavities of switching unit at inserting and withdrawing of the circuit breaker
State before insertion/withdrawal State of circuit breaker before insertion State of circuit breaker before withdrawal State of switches before insertion - withdrawn position State of switches before withdrawal - inserted position Cavity PS-BHD-1000 Circuit breaker lever position State of the main contacts 1 PS-BHD-0100 PS-BHD-1000 2 PS-BHD-0100 3 (4, 5, 6)1) PS-BHD-1000 PS-BHD-0100 PS-BHD-1000 State after insertion/withdrawal State of switches after insertion - inserted position State of switches after withdrawal - withdrawn position 1 PS-BHD-0100 PS-BHD-1000 2 PS-BHD-0100 3 (4, 5, 6)1) PS-BHD-1000
4 3
Switched on Switched off manually or by motor drive electrically (loaded state) Switched off by overcurrent release Switched off from switched on state: by auxiliary release, or by TEST push button or by the switch off button on the motor drive note: 0 - contact open, 1 - contact closed 1) - cavities 4, 5, 6 are only for 4-pole design
1 0 0
1 1 0
0 0 1
0 0 1
1 1 0
1 0 0
0 1 1
1 1 0
0 0 1
1 1 1
0 0 0
0 0 0
E53
PS-BHD-0100 1 1 1 1
Modeion
BD250N, BD250S
Technical information
3P 4P Specifications
Type SE-BD-0160-L001 SE-BD-0200-L001 SE-BD-0250-L001 In [A] 160 200 250 Irm [A] 640 800 1000
Tripping characteristic
SE-BD-0...-L001
10000 5000 60 30 2000 1000 10 5 200 2 1 t [min] 20 10 5 2 100 50 500
Ir
L
I n= 160 A I n= 200 A I n= 250 A
t [s]
Irm
x In
50
E54
BD250N, BD250S
Technical information
Modeion
3P 4P Specifications - adjustable
Type
In [A]
Ir [A] 40 43 46 48 50 55 58 61 63 69 72 76 80 87 91 100 63 69 72 80 87 91 100 110 115 120 125 130 137 144 150 160 100 110 115 125 137 144 160 172 180 190 200 210 220 231 243 250
restart
Irm
Ir
Irm
SE-BD-0100-DTV3
100
T(0) T(t)
4 x Ir 8 x Ir
Tripping characteristic
SE-BD-....-DTV3
10000 5000 60 30 2000 1000 10 5 200 2 1 t [min] 20 10 5 2 In= 100 A In= 160 A In= 250 A 100 50 500 min
I
Ir
ma x
Ir
Irm
SE-BD-0160-DTV3
3 3
160
T(0) T(t)
4 x Ir 8 x Ir
t [s]
1 0.5 0.2 0.1 0.05 In= 100 A 0.02 0.01 0.1 0.05 In= 160 A 0.02 0.01 0.1 0.05 In= 250 A 0.02 0.01 0.1 0.2 0.5 1 2 5 10 20
4x
I
8x
4x
8x 4x
Irm
x In
8x
4x
8x 4x
Irm
x In
8x 4x 8x
SE-BD-0250-DTV3
Irm
250
T(0) T(t)
4 x Ir 8 x Ir
x In
50
Reduced current setting Ir, resp. rated current according to the protected device
E55
Modeion
BD250N, BD250S
Technical information
3P 4P
0 ms
SE-BD-0100-MTV8
100
50 ms
MTV8
L I
Ir
tr
0 ms
Irm
50ms 0ms
SE-BD-0160-MTV8
160
50 ms
0 ms
SE-BD-0250-MTV8
250
50 ms
Reduced current setting Ir, resp. rated current according to the protected device
Choice of characteristic type. Delay setting at 7.2 Ir. Switching ON/OFF of the thermal memory.
E56
BD250N, BD250S
Technical information
Modeion
3P 4P
Characteristic "M"
10000
Ir
ma x 0ms 50ms
TV
60 30
Ir
min ma x 0ms 50ms
M
Ir tr Irm
Ir
tr
Irm
20
L
tr
20 10
100 50 20
L
tr
15 20 15 8 3
t [min]
8 3
3 2
t [s]
1 0.5 0.2 0.1 50 0.05 In = 100 A 0.02 0.01 0.1 50 0.05 In = 160 A 0.02 0.01 0.1 50 0.05 In = 250 A 0.02 0.01 0.1 0.2 0.5 1 2
0.35
t [s]
1 0.5
I
0.125 0 0.25 0.4 0.6 0.8 1.0 1.25 1.5
I
In = 100 A 0.125 0 0.25 0.4 0.6 0.8 1.0 1.5
Irm [kA]
0.02 0.01
Irm [kA]
x In
0.2 0 0.4 0.6 1.0 1.3 1.6 2.0 2.4
0.1 50 0.05
x In
In = 160 A 0.2 0 0.4 0.6 1.0 1.3 1.6 2.0 2.4
Irm [kA]
0.02 0.01
Irm [kA]
x In
0.5 0 0.75 1.0 1.25 1.5 2.0 2.5
0.1 50 0.05
x In
In = 250 A
0.35
Irm [kA]
0.02 0.01
0.5 0
0.75 1.0
1.25
Irm [kA]
10
20
x In
50
0.1
0.2
0.5
10
20
x In
50
E57
Modeion
BD250N, BD250S
Technical information
3P 4P
0 ms
100 ms
SE-BD-0100-MTV9
100
200 ms
300 ms
MTV9
L S I
0 ms
Ir tr
100 ms
Irmv tv
SE-BD-0160-MTV9
160
200 ms
300 ms
0 ms
100 ms
SE-BD-0250-MTV9
250
200 ms
Reduced current setting Ir, resp. rated current according to the protected device
300 ms
Choice of characteristic type. Delay setting at 7.2 Ir. Switching ON/OFF of the thermal memory.
E58
BD250N, BD250S
Technical information
Modeion
3P 4P
Characteristic M
10000
Ir
max
TV
Ir tr Irm v tv
60 30
min
Ir
max
M
Ir tr Irm v tv
L
20 15
t [s]
tr [s]
2
S
300 200
t [s]
8 3
tr [s]
1 0. 5 0. 2
S
300 200
tv [ms]
100
3 xI r
5 xI r 7 xI r
9 xI r
3 xI r
5 xI r 7 xI r
I n =250 A
9 xI r
I n =250 A
I n =100 A
I rm v
1 2 5 10 20
I rm v
0. 1 0.2 0.5 1 2 5 10 20
x In
I n =100 A
I n =160 A
I n =160 A
0. 1
tv [ms]
100
50
x In
50
E59
Modeion
BD250N, BD250S
Technical information
4P
Specifications - adjustable
Type In [A] Ir [A] 40 43 46 48 50 55 58 61 63 69 72 76 80 87 91 100 63 69 72 80 87 91 100 110 115 120 125 130 137 144 150 160 100 110 115 125 137 144 160 172 180 190 200 210 220 231 243 250 tr [s] (7.2 x Ir) 1 2 3 T(0) 10 4 20 20 7 10 T(t) 3 9 1 OFF 1 0.75 0.5 restart Irm [kA] IN [A] (m x Ir )
SE-BD-0100-4D01
Ir IN
100
tr
Irm
Tripping characteristic
SE-BD-0...-4D01
5000 60 30 2000 1000 10 5 200 2 1 t [min] 20 10 5 2 3 100 50 1 500
IN
10000
Ir
min max
IN
Ir
tr
Irm
SE-BD-0160-4D01
160
20 10
20 10
tr [s]
t [s]
I
2 xI r 4 xI r 7 xI r 9 xI r
I rm
SE-BD-0250-4D01 250
x In
50
Reduced current setting Ir, resp. rated current according to the protected device
E60
BD250N, BD250S
Technical information
Modeion
3P 4P
SWITCHES
Specifications
Type Rated operating voltage Rated insulation voltage Rated frequency Simple Rated operating current Thermal current Arrangement of contacts Connection cross-section S Degree of protection of terminals (of connected switch) Double Type Rated operating voltage Rated insulation voltage Rated frequency Rated operating current Make-and-break Thermal current Arrangement of contacts Connection cross-section
1)
PS-BHD-..00 Ue Ui fn Ie / Ue AC-15 Ie / Ue DC-13 Ith 60 500 V a.c. 60 500 V d.c. 500 V 50/60 Hz 6 A/240 V, 4 A/400 V, 2 A/500 V 0.4 A/240 V, 0.3 A/400 V, 0.2 A/500 V 10 A 01, 10, 02, 11, 20 0.5 1 mm2 IP20 SP-BHD-0002 Ue Ui fn Ie / Ue Ie / Ue Ith S 250 V a.c. 250 V 50/60 Hz 1 A/250 V a.c. 02, 11, 20 0.5 1 mm IP20
2
PS-BHD-..00-Au1) 5 60 V a.c. 5 60 V d.c. 500 V 50/60 Hz AC-12, DC-12 0.004 0.5 A/5 V, 0.004 0.01/60 V 0.5 A 01, 10, 02, 11, 20 0.5 1 mm2 IP20
AC-15 1.5 A/250 V a.c. AC-12, DC-12 0.004 0.5 A/5 V, DC-13 0.2 A/250 V d.c. 0.004 0.01/60 V 6A 0,5 A 001/002 0.5 1 mm IP20
2
Switch function signals tripping of circuit breaker by overcurrent release signals tripping of circuit breaker by releases, TEST push button or by switch off button on the motor drive signals position of circuit breaker/switch-disconnectors main contacts
Cavity 2
1 2 3
PS-BHD-....
10
Cavity 10 Early makes/breaks in advance before making the main contact of circuit breaker/switch-disconnector - states of switches in the circuit breaker cavities, see page E18 2) - cavities 4, 5, 6 are only for 4-pole design
Switches
Diagram
early signal relative auxiliary auxiliary auxiliary auxiliary auxiliary
10 .Y 1
1. 1
10 .Y 3
1. 2
1. 4
3. 1
2. 1
5. 1
1. 3
2. 1
3. 3
2. 1
3. 1
2. 3
3. 3
4. 3
4. 1
2. 3
2. 2 2. 4
3. 2
3. 3
4. 2 4. 4
5. 3
5. 2
6. 3
6. 1
3. 4
5. 4
6. 2 PS-BHD-0100
PS-BHD-100 0
PS-BHD-010 0
SP-BHD-0002
or
or
PS-BHD-0010
PS-BHD-1000
PS-BHD-0100
PS-BHD-0100
PS-BHD-1000
PS-BHD-0100
PS-BHD-0010
PS-BHD-1000
PS-BHD-0010
PS-BHD-1000
PS-BHD-0100
PS-BHD-0010
PS-BHD-0010
PS-BHD-1000
6. 4
or
10 .Y 4
10 .Y 2
2. 1
PS-BHD-2000
PS-BHD-1100
PS-BHD-0200
or
or
or
or
or
or
or
PS-BHD-0020
or
or
or
or
or
2. 2
2. 2
3. 1
4. 2
4. 1
5. 1
6. 4
6. 2
2. 4
3. 4
2. 2
1. 2
3. 4
2. 4
3. 2
1. 4
1. 1
3. 2
4. 4
5. 4
cavity No.10
cavity No.1
cavity No.2
3. 4
cavity No.3
cavity No.2 + 3
cavity No.4
5. 2
cavity No.5
cavity No.6
6. 1
2.1
3.1
PS-BHD-0010
E61
Modeion
SHUNT TRIPS
BD250N, BD250S
Technical information
3P 4P Specifications
Type Rated operating voltage Rated frequency Input power at 1.1 Ue Characteristic Time to switching off Loading time Connection cross-section Degree of protection of terminals Position in cavity No. S (connected release) AC DC Ue fn SV-BHD-X 24, 40, 48, 110, 230, 400, 500 V a.c. 24, 40, 48, 110, 220 V d.c. 50/60 Hz < 3 VA <3W U 0.7 Ue the circuit breaker must trip 20 ms
SV -BHD-X... SP-BHD-X...
10
The specific rated operating voltage of the release is set up by jumpers directly on the release. It is always set to the maximum value by default (see Fig. 1).
1 0
20 Auxiliary switch
3.4 3.4
3.3 3.3
1 0
20 Auxiliary switch
14 3.2
13 3.1
1 0
20 Relative switch
1
2.4 2.3
30 Relative switch
1
2.2 2.1
30
1 0
1 0
10 3 50 00
10 2 50 0
10 50
t [ms ]
E62
10
1 5
BD250N, BD250S
Technical information
Modeion
3P 4P
UNDERVOLTAGE RELEASES
Specifications
Type Rated operating voltage Rated frequency Input power at 1.1 Ue Characteristic 1) AC DC Ue fn SP-BHD-X 24, 40, 48, 110, 230, 400, 500 V a.c. 24, 40, 48, 110, 220 V d.c. 50/60 Hz < 3 VA <3W U 0.85 Ue - circuit breaker can be switched on U 0.35 Ue - circuit breaker must trip 20 ms
SP-BHD-X-00012) 24, 40, 48, 110, 230, 400, 500 V a.c. 24, 40, 48, 110, 220 V d.c. 50/60 Hz < 3 VA <3W U 0.85 Ue - circuit breaker can be switched on U 0.35 Ue - circuit breaker must trip 20 ms
Time to switching off Loading time Connection cross-section Degree of protection of terminals Position in cavity No.
SV -BHD-X... SP-BHD-X...
0.5 1 mm2 IP20 10 250 V a.c. 50/60 Hz 1 A/250 V a.c. 10, 01 0.5 1 mm2 IP20
Early switch
1 2 3
PS-BHD-....
10
Rated operating voltage Rated frequency Rated operating current Arrangement of contacts Connection cross-section Degree of protection of terminals
1)
- tripping of the undervoltage release can be delayed using the delay unit BZ-BX-X230-A, for more detailed information see page P 2) - cannot be used in combination with MP-BD-X.... motor drive
The specific rated operating voltage of the release is set up by jumpers directly on the release. It is always set to the maximum value by default (see Fig. 1).
1 0
20 Auxiliary switch
3.4 3.4
3.3 3.3
1 0
20 Auxiliary switch
14 3.2
13 3.1
1 0
20 Relative switch
1
2.4 2.3
30 Relative switch
1
2.2 2.1
30 Early switch
1
10.Y2 10.Y4 10.Y 1 10.Y 3
0 Early switch 1 0 20
States of circuit breaker/ Lever position of circuit switch-disconnector breaker/switch-disconnector Switched on Switched off by releases, TEST or by switch off button on the motor drive Switched off manually or by motor drive electrically (loaded state)
10.Y2 10.Y4
10.Y 1 10.Y 3
10 3 50 00
10 2 50 0
10 50
t [ms ]
10
1 5
E63
Modeion
AUXILIARY RELEASES
Specifications
Reaction time of the auxiliary releases Shunt trip
BD250N, BD250S
Technical information
3P 4P
Undervoltage release
SV
0 >50 1 0
SP
1 0 >50 1
OK
t (ms)
OK OK
t (ms)
Cooperation of motor drive and shunt trip or undervoltage release It is necessary to keep time delay when the control of the circuit breaker is done by motor drive and shunt trip or undervoltage release. The following time delays have to be kept between the disconnection of voltage from the shunt trip or bringing the voltage to the undervoltage release and the control impulse for switch on of the motor drive: Shunt trip Undervoltage release
HK
1 0 50
HK
1 0 50
SV
1 0 >50 20 700 1 0
SP
SP
1 0 >50 1 20 700
IMP ON
t (ms)
IMP ON
t (ms)
Description of graphs
Symbol HK OK IMP ON SV SP Description main contacts Circuit breaker is ready for further handling Make impulse for the motor drive Control voltage on the shunt trip Control voltage on the undervoltage release
E64
BD250N, BD250S
Technical information
Modeion
3P 4P
HAND DRIVES
Description
The hand drive enables to the circuit breaker/switchdisconnector by turning the lever, e.g. to switch machines on and off. Modular conception of the drives enables simple mounting on the switching unit (also additionally) after the cover of cavities is removed. The fixed drive can be sealed. The drive and its accessories are ordered separately according to your choice, see page E11. The hand drive makes it possible to control the circuit breaker: a) from the front panel (Fig.1) Hand drive unit RP-BD-CK.. + Hand drive lever RP-BHD-CP.. b) through the switchboard door (Fig.2) Hand drive unit RP-BD-CK.. + Extension shaft RP-BHD-CH. + Hand drive bearing PR-BHD-CN.. + Hand drive lever + RP-BHD-CP.. The hand drive unit is fixed directly to switching unit of the circuit breaker. The hand drive bearing is fixed to the switchboard door and it provides degree of protection IP40 or IP66. Hand drive lever is fixed on the hand drive unit or on the hand drive bearing. The extension shaft is supplied in two options, standard (length 365 mm - can be shortened) and telescopic (adjustable length 245 410 mm). Enhanced safety for operator: The hand drive unit and hand drive lever are also supplied with the possibility to lock the circuit breaker in position switched off manually. The unit and lever of the hand drive can be locked using three padlocks with shank diameter max. 6 mm. Each hand drive bearing prevents the door from opening when the circuit breaker is switched on or in a state of being switched off by releases and in the circuit breaker stateswitched off manually and when the hand drive lever is locked up. Two circuit breakers with hand drives can be fitted also with reciprocal mechanical interlocking or mechanical parallel switching, see page E66.
By a screwdriver it is possible to unlock the mechanism blocking the switchboard door opening with the circuit breaker switched on (for bearing RP-BHDCN40 and RP-BHD-CN41).
Specifications
Type RP-BD-CK10 RP-BD-CK20 RP-BD-CK21 RP-BD-CK30 RP-BD-CK31 RP-BHD-CP10 RP-BHD-CP20 RP-BHD-CP21 RP-BHD-CN40 RP-BHD-CN41 RP-BHD-CN60 RP-BHD-CN61 RP-BHD-CH10 RP-BHD-CH20 Description Hand drive unit Hand drive unit Hand drive unit Hand drive unit - right side Hand drive unit - left side Hand drive lever Hand drive lever Hand drive lever Hand drive bearing Hand drive bearing Hand drive bearing Hand drive bearing Extension shaft Extension shaft - telescopic Colour Locking while the circuit Degree of breaker is in OFF state protection blue blue yellow blue blue black black red black yellow black yellow no yes yes no yes yes IP40 IP40 IP66 IP66 Locking of the switchboard door opening in the circuit breaker state switched on switched off manually and Switchboard door opening with Length [mm] locked the circuit breaker switched on yes yes yes yes yes yes yes yes yes yes no no 365 (can be shortened) 245 410
E65
Modeion
BD250N, BD250S
Technical information
3P 4P
Right switching unit BD250..3.. Dimension [mm] BD250..3.. BD250..4.. BH630..3.. BH630..4.. X 105 105 122.5 122.5 L 112 112 128.5 128.5 Left switching unit BD250..4.. X 140 140 157.5 157.5 L 145.5 145.5 162.5 162.5 BH630..3.. X 122.5 122.5 140 140 L 128.5 128.5 145.5 145.5 BH630..4.. X 181 181 185 185 L 185.5 185.5 189 189
Right switching unit BD250..3.. Dimension [mm] Left switching unit BD250..3.. BD250..4.. BH630..3.. BH630..4.. Xmin 105 105+7 122.5+7 122.5+7
+7
BD250..4.. Xmin
-7
BH630..3.. Xmin
-7
BH630..4.. 1) Xmin
-7
Xmax
+7
Xmax
+7
Xmax x x x x
x x x x
1)
- Switching unit BH630..4.. (4-pole design) can only be on the left side
E66
BD250N, BD250S
Technical information
Modeion
3P 4P
MECHANICAL INTERLOCKING
Mechanical interlocking MB-BD-PV05 MB-BHD-PV03
Provides mechanical interlocking of two circuit breakers/ switch-disconnectors so that they cannot both be tripped simultaneously, but only one of them at a time. Both circuit breakers may be switched off simultaneously. Mechanical interlocking MB-BD-PV05 is intended for two BD250 circuit breakers. Interlocking MB-BHD-PV03 is intended for one BD250 circuit breaker and one BH630. Circuit breakers may be in fixed, plug-in and withdrawable designs.
Type of circuit breakers BD250 BD250
Circuit breakersplace in switchboard Detailed information can be found in the instructions for use, which you may download from our website www.oez.com.
Recommended process of manipulation 1) Shunt trip/undervoltage release must be used to switch off the circuit breaker. Circuit breaker switching off cannot be made by motor drive. 2) Circuit breaker can be stored and switched on only if the second circuit breaker is in switch-off mode. Circuit breaker status indicator on motor drive is in O position. Between storing and switching on the circuit breaker, it is necessary to keep the time interval min. 100 ms. Switch S must be disconnected. 3) In case of infringement of these principles, the first switching on of circuit breaker is unsuccessful.
Rmin
=4
109
0 700
45 30 min. 80
E67
Modeion
MOTOR DRIVES
BD250N, BD250S
Technical information
3P 4P Description
It is used for remote control of the circuit breaker (switch off/on). Simple mounting on the circuit breaker after the circuit breaker cover of cavities is removed. Usage in industrial applications e.g. switching of stand by units etc. or wherever the automatic operation of electric devices is needed. In order to speed up the circuit breakers switch off (e.g. safety STOP button) the undervoltage release or shunt trip can be used. On the motor drive front panel there is a change-over switch to select the drive modes AUTO/MANUAL: - AUTO mode remote control. The circuit breaker is controlled by buttons for remote switch off/on, furthermore in this position mechanical control can be used on the front panel of the motor drive. - MANUAL mode manual control. Control voltage is not needed. The circuit breaker can be switched on using the green switch on button and switched off using the red switch off button on the front part of the drive cover. Electric switch on is blocked. Electric switch off is functional. The accumulation of energy can be done by means of hinged lever. Possibility to indicate remotely the state of the AUTO/ MANUAL switch. Switch S (external switch has to be bought separately) enables the choice of automatic accumulation of energy (circuit breaker loading). - automatic accumulation of energy is switched on (S switch closed): after tripping of the circuit breaker by the overcurrent release, by auxiliary release, or by TEST push button or by the switch off button on the motor drive, motor drive immediately accumulates energy (circuit breaker loading), motor drive is then ready to switch on the circuit breaker - automatic accumulation of energy is switched off (S switch open): after tripping of the circuit breaker by the overcurrent release, by auxiliary release, or by TEST push button or by the switch off button on the motor drive, both motor drive and circuit breaker stay in position switched off by releases. In this position motor drive waits for the impulse from switch S. When the impulse is brought in the motor drive accumulates energy (turn on the circuit breaker) and after this loading the motor drive is ready to switch on the circuit breaker. It is not possible to switch on the circuit breaker when motor drive is not loaded Front panel state indicating device of the stored energy signals the state of motor drive storage devices. The state can be signalled from a distance. The drive may be furnished with an electromechanical counter of cycles. - internal design on the motor drive cover - external design OD-BHD-PP01 for mounting on the switchboards door or inside the switchboard by means of metal holder, that is part of the delivery Motor drive can be sealed by means of bolt sealing insert (OD-BD-VP01). Drive can be locked in off position by up to three padlocks (shank diameter max. 4.3 mm). Switch on button can be covered and sealed (ODBHDKT01). Drive is connected by multi-pole connector with cavities ( in order to connect cables special tongs have to be used). Drive can be furnished with cable (OD-BHD-KA02), that has on one side connector to the motor drive and on the other side free terminals for connection to etc. switchboards terminal block.
Specifications
Type Cover of switch on button OD-BHD-KT01 Operating voltage Rated frequency Control impulse length for storage Control impulse length for switching on for switching off Time to switching on Time to switching off Frequency of cycles ON/OFF Frequency of cycles - instant successive ON/OFF Connecting cable OD-BHD-KA02 Mechanical endurance Input power Protection Rated operating current of the change-over switch AUTO / MANUAL Type Number of conductors Conductor cross-section Conductor lengths 1) - for sequence of control impulses, see page E71 AC DC 24, 48, 110 V a.c.; 230 V a.c. 24, 48, 110 V d.c.; 220 V d.c. Ie / Ue Ue fn MP-BD-X, MP-BD-X-P 24, 48, 110, 230 V a.c. 24, 48, 110, 220 V d.c. 50 / 60 Hz 400 ms 1) 20 ms 700 ms 1) 400 ms 1) < 50 ms 800 ms 3 cycles/min 10 cycles 30 000 cycles 100 VA 100 W LPN-4C-1; LPN-2C-1 LPN-DC-4C-1; LPN-DC-2C-1 5 A/250 V a.c. 0.5 A/250 V d.c. OD-BHD-KA02
12
E68
BD250N, BD250S
Technical information
Modeion
3P 4P
MOTOR DRIVES
Specifications
Circuit breaker switching on by motor drive - electrically by ON push button
Main contacts
2 4 6 1 3 5
Circuit breaker switching off by motor drive - electrically by OFF push button
Main contacts
1 0
50 Auxiliary switch
2 4 6
1 3 5
800
3.4 3.4
3.3 3.3
1 0
50
3.4 3.4 3.3 3.3
800
Auxiliary switch
14 3.2 13 3.1
1 0
40
14 3.2 13 3.1
1 0 Relative switch 1
800
Relative switch 1
2.4 2.3
0 Relative switch 1
2.4
2.3
0 Relative switch 1
2.2
2.1
2.2
2.1
10.Y2 10.Y4
10.Y 1 10.Y 3
10.Y2 10.Y4
10.Y 1 10.Y 3
10.Y2 10.Y4
10.Y 1 10.Y 3
10.Y2 10.Y4
10.Y 1 10.Y 3
10 3 50 00
10 3 50 00
10 2 50 0
10 2 50 0
10 50
10
10 50
t [ms ]
t [ms ]
Diagram
Circuit breaker switching on and off by motor drive - electrically by ON and OFF push button
Ovldac obvod motorovho pohonu Control circuit of motor drive
Q3 L+
ON S OF F B
Switched off by releases, TEST or by switch off button on the motor drive Switched off manually or by motor drive electrically (loaded state)
Diagram description
X3 9 7 3 4 1 5
Symbol MP M P
Description motor drive MP-BD-X... motor storage device connector for connection of control circuits connector for external counter of cycles switch to indicate AUTO (NO-C) / MANUAL (NC-C) modes external counter of cycles OD-BHD-PP01 recommended wiring of the control circuits (not included in motor drive order) switch on button switch off button switch for energy storage (switched on = automatic storage, may be continuously switched on) motor drive circuit breaker - see page E68
NC
NO
S5
C
X3 X4
S5*) YC B
MP
8 X3
2 X4
ON OFF S
PE
N-
Q3
Po. cykl Cycle counter
*) For custom production it is possible to make the design with signalling of storage device state
10
1 5
1 5
E69
Modeion
MOTOR DRIVES
Specifications
BD250N, BD250S
Technical information
3P 4P
Switching off of the circuit breaker with motor drive by overcurrent release (switch S in switched on state-automatic storage)
Main contacts
2 4 6 1 3 5
Switching off of the circuit breaker with motor drive by shunt trip or undervoltage release (switch S in switched on state-automatic storage)
Main contacts
2 4 6 1 3 5
1 0
20 Auxiliary switch
1 0
20 Auxiliary switch
3.4 3.4
3.3 3.3
1 0
20
3.4 3.4 3.3 3.3
1 0
20 Auxiliary switch
Auxiliary switch
14 3.2 13 3.1
1 0
20
14 3.2 13 3.1
1 0
20 Relative switch
Relative switch 1
2.4 2.3
30 Relative switch
520
2.4 2.3
1 0
30 Relative switch
520
1
2.2 2.1
30 Signal switch
520
2.2 2.1
1 0
30
520
1
1.2 1.1
1 0
1 0
1.4
1.3
10 3 50 00
10 3 50 00
10 2 50 0
10 2 50 0
10 50
10 50
t [ms ]
10
t [ms ]
Diagram
Circuit breaker switching on by motor drive (electrically by ON push button) and tripping by shunt trip
Ovldac motor Control circuit ofobvod drive
Circuit breaker switching on by motor drive (electrically by ON push button) and tripping by undervoltage release
Ovldac obvod Control circuit of motor drive
Q3 L+ L+
Q3
ON S OF F B B OF F
ON S
A1
A1
B1
X3
X3
SV -BHD-X...
B1
SP-BHD-X...
S5
C
S5
C
or
SP-BHD-X...
NC
NO
NC
NO
or
MP
MP
A2
B2
A2
X3
X4
X3
X4
N-
N-
E70
B2
SV -BHD-X...
10
1 5
1 5
BD250N, BD250S
Technical information
Modeion
3P 4P
MOTOR DRIVES
Specifications
Recommended control impulses Circuit breaker switching on and off by motor drive - S switch permanently closed (automatic storage) or open
800 HK 1 0 800 PS 1 0 > 1400 1 0 400 IMP OFF >100 20 1500 IMP ON t [ms ]
1 0 R OFF
Circuit breaker switching off by overcurrent or auxiliary release and switching on by motor drive - S switch permanently closed (automatic storage)
50 HK 1 0 520 RS 1 0 > 1400 20 700 IMP ON t [ms ] > 880
50
> 600
Circuit breaker switching off by overcurrent or auxiliary release and switching on by motor drive - S switch closed only for storing up
50 HK 1 0 X+520 RS 1 0 X 1 0 R OFF > 1400 400 IMP S >100 20 700 IMP ON t [ms ] > 880
Description of graphs
Symbol HK PS RS R OFF IMP S IMP ON IMP OFF X Description main contacts auxiliary switch relative switch circuit breaker closing instant by release impulse to store up motor drive energy (generated by S switch) make impulse for the motor drive break impulse for the motor drive random segment of time
E71
Modeion
MOTOR DRIVES
Diagram
BD250N, BD250S
Technical information
3P 4P
Recommended wiring diagram of connecting the circuit breaker control circuits in withdrawable/plug-in design with motor drive - connecting with control relays - operating voltage Ue 24 V a.c./d.c., 48 V a.c./d.c., 110 230 V a.c., 110 V d.c. Switching off by motor drive
Q3 L+ S OFF ON
X3
A1
K1
OD-BHD-R...
NC NO
3.3
1.1
3.4 3 4 A2 K2
1.2
S5
C
MP
X3
X4
2 YC
PE
N-
Diagram description Symbol Description MP motor drive - Ue of drive must be the same as Ue of control relay M motor P storage device X3 connector for connection of control circuits X4 connector for external counter of cycles S5 switch to indicate AUTO (NO-C) MANUAL (NC-C) modes external counter of cycles OD-BHD-PP01 YC (not included in motor drive order) OFF switch off button S switch for energy storage Q3 motor drive circuit breaker for 24 V a.c. LPN-4C-1 for 48 Va.c. LPN-4C-1 for 110 Va.c. LPN-4C-1 for 230 Va.c. LPN-2C-1 for 24 Vd.c. LPN-DC-4C-1 for 48 Vd.c. LPN-DC-4C-1 for 110 Vd.c. LPN-DC-4C-1 for 220 Vd.c. LPN-DC-2C-1 OD-BHD-R control relay for 24 V a.c./d.c. OD-BHD-RX01 for 48 V a.c./d.c. OD-BHD-RX02 for 110230 V a.c. OD-BHD-RA03 for 110 V d.c. OD-BHD-RD04 3.PS-BHD-1000 auxiliary switch 1.PS-BHD-0100 signal switch
3.PS-BHD-1000
E72
1.PS-BHD-0100
BD250N, BD250S
Technical information
Modeion
3P 4P
MOTOR DRIVES
Diagram
Recommended wiring diagram of connecting the circuit breakers control circuits with mechanical interlocking and motor drive (valid for all circuit breakers) - connecting with control relays - operating voltage Ue 24 V a.c./d.c., 48 V a.c./d.c., 110 230 V a.c., 110 V d.c. Switching off is possible only by undervoltage release or shunt trip
Q3 L+
OFF
OFF
ON
13.PS-BHD-1000
OD-BHD-R.. .
A1 SP-BHD-X... B1 SV-BHD-X...
NC NO
3.3
1.1
1.PS-BHD-0100
1.2
X3
3.3
3.4 3 4 A2 K2
3.4
S5
C
B2
A2
MP
X3
X4
2 YC
PE
N-
Diagram description Symbol Description MP motor drive - Ue of drive must be the same as Ue of control relay M motor P storage device X3 connector for connection of control circuits X4 connector for external counter of cycles S5 switch to indicate AUTO (NO-C) MANUAL (NC-C) modes YC external counter of cycles OD-BHD-PP01 OFF switch off button Q3 motor drive circuit breaker for 24 Va.c. LPN-4C-1 for 48 Va.c. LPN-4C-1 for 110 Va.c. LPN-4C-11 for 230 Va.c. LPN-2C-1 for 24 Vd.c. LPN-DC-4C-1 for 48 Vd.c. LPN-DC-4C-1 for 110 Vd.c. LPN-DC-4C-1 for 220 Vd.c. LPN-DC-2C-1 OD-BHD-R control relay for 24 V a.c./d.c. OD-BHD-RX01 for 48 V a.c./d.c. OD-BHD-RX02 for 110230 V a.c. OD-BHD-RA03 for 110 V d.c. OD-BHD-RD04 1.PS-BHD-0100 signal switch 13.PS-BHD-1000 switch inserted in cavity 3 (first circuit breaker) - auxiliary switch 23.PS-BHD-1000 switch inserted in cavity 3 (second circuit breaker) - auxiliary switch SP-BHD-X... undervoltage release - Ue of release must be the same as Ue of control relay SV-BHD-X... shunt trip - Ue of release must be the same as Ue of control relay
23.PS-BHD-1000
A1
K1
E73
Modeion
NOTES
BD250N, BD250S
Technical information
E74
Modeion
Modeion
DELAY UNIT
Type BZ-BX-X230-A Product code 36696
Package [pc] 1
3
Ue
Circuit breaker BC160 BD250, BH630 BL1000, BL1600 1. level 1.0 0.6 0.5
2 1
4 3
6 5
8 7 STOP
2 1
4 3
6 5
8 7 STOP
2 1
4 3
6 5
8 7
Ue [AC] Ue [DC]
Ue [AC] Ue [DC]
Ue [AC] Ue [DC]
STOP A1 U< A2
A1
U<
A2
A1
U<
A2
1
Ue + 2 1 4 3 6 5 8 7 STOP A1 U< A2 A1 + 2 1 4 3
2
Ue + 6 5 8 7 STOP U< A2 A1 2 1 4 3 Ue
6 5
8 7
Ue [AC] Ue [DC]
Ue [AC] Ue [DC]
Ue [AC] Ue [DC]
STOP
U<
BZ-BX-X230-A
A2
65.5
45
88
52.5
5.3
24 44 62
For more detailed information and documentation contact our technical support No.: +420 465 672 191 or visit our websites www.oez.com
P2
86
Modeion
- control relay is suitable for control of the circuit breaker with motor drive in withdrawable/plug-in device or in combination with mechanical interlocking by bowden, see page E72, E73, F70, F71
Specifications
Type Standards Approval marks Control circuit Rated operating voltage Rated frequency Consumption at Un Mechanical endurance Electrical endurance Connection Torque Control impulse Min. excitation time Max. excitation time Other data Mounting on U rail according to EN 60715 - type Degree of protection Ambient temperature Working position Seismic resistance
OD-BHD-R...
OD-BHD-R EN 61812-1
Ue
24 V a.c./d.c., 48 V a.c./d.c., 110 230 V a.c./d.c., 110 V d.c. 50 Hz 1.2 VA 2.6 VA 1.4 W 1.7 W 30 000 cycles 30 000 cycles 0.2 2.5 mm2 0.5 Nm 15 ms unlimited TH 35 IP20 -20 +50 C arbitrary 3g / 8 50 Hz
~88
65.5
45
17.5
~4.5
24 44 62
86
P3
Modeion
P4
Modeion
Type of switch-disconnector Modeion Back-up protective device BC BC160 (all overcurrent releases types) BD250 (all overcurrent releases types) BH630 (all overcurrent releases types) BL1000 (all overcurrent releases types) BL1600 (all overcurrent releases types) PN, PLN, PHN gG max. In = 125 A PN, PLN, PHN gG max. In = 224 A PN, PHN gG max. In = 500 A PN, PHN gG max. In = 630 A
3) 3) 3) 3)
IK [kA]/400 V a.c. BD 25 18
3)
25 18 100
65
65
65
65
Notes: 1) Additional values in table 1) are related to the back-up circuit breaker of design N. 2) Additional values in table 2) are related to the back-up circuit breaker of design S. 3) Max value of initial peak short-circuit current that enables the usage of switch-disconnector with back-up fuse-links of lower rated currents (see 3)) is determined on the basis of equality of their limited current io. - In rated current of back-up fuse-link has to be min by one degree lower than Ie rated current of the switch-disconnector. - Given values are valid for voltage 400 V a.c.
Modeion
NOTE
R2
Modeion
GLOSSARY OF TERMS
Note: Precise wording of definitions and texts relating to a given term are detailed in the respective standards (see Name).
Symbol Ue
Explanation Voltage fixed by the manufacturer. Several pertinent tests relate to its determination, as may also the utilization category. Along with the rated (operating) current, it determines the devices utilization. The highest value of rated operating voltage may in no case be greater than the value of the rated insulation voltage Ui. Voltage measure to which are related tests of dielectric strength and creepage distance.
Rated insulation voltage EN 60947-1; 4.3.1.2 Rated current EN 60947-2; 4.3.2.3 Reduced rated current
Ui
In
Current value of particular circuit breaker that can be handled uninterruptedly. The highest current valued tripping the circuit breaker in conformity with a specifically stated tripping characteristic. Specifically established, reduced value of In current for a regulated time-dependent (thermal) release and that the circuit breaker can handle continuously. Maximum setting is at value equal to In. Changing Ir shifts the releases tripping characteristic along the current axis. (Ir = k x In holds where k 1) Time after which circuit breaker will trip, if a current flows through it that is equal to the given multiple of Ir. Changing tr shifts the tripping characteristic along the time axis. Minimum current value causing the releases time-independent delay to actuate.
Ir
tr
Actuating current of (selective) releases timeindependent delay Delay of time-independent delayed release
Irmv
tv
If a current flows through the circuit breaker equal to at least Irmv but not reaching Irm the circuit breaker will trip with time delay tv. Total shut-off time is influenced by the tripping of the circuit breaker itself and is about 10 20 ms longer. Minimum current value causing the time-independent instantaneous release to actuate.
Actuating current of time-independent instantaneous (short-circuit) release Rated operating current EN 60947-1; 4.3.2.3
Irm
Ie
Rated operating current of device (switch-disconnector) is fixed by the manufacturer with consideration for the rated operating voltage, rated frequency, rated operation, utilization category and type of protective cover, if that comes into consideration. Current value set by the manufacturer and which the device can handle in continuous operation, i.e. during a period longer than 8 hours (weeks, months, or longer). Ultimate short-circuit breaking capacity value expressed as the rms value of the alternating component of the assumed short-circuit current that the circuit breaker must be able to manage in the mode: 1x switching off of the short circuit and a following 1x make-break sequence. After testing, the circuit breaker need not be able to conduct the rated current uninterruptedly. Icu is set for the rated operating voltage at the rated frequency and at the established power factor for alternating current or at the time constant for direct current. Must fulfil the condition: Icu Ik Value of the operating short-circuit breaking capacity expressed as the rms value of the alternating component of the assumed short-circuit current that the circuit breaker must be able to manage in the mode: 1x switching off of the short circuit and a following 2x make-break sequence. May also be expressed as a percentage of Icu. After testing, the circuit breaker must be able uninterruptedly to conduct the rated current and to switch off the overcurrent. Temperature increase of the main terminals may be greater. Ics is set for the rated operating voltage at the rated frequency and at the established power factor for alternating current or at the time constant for direct current. Permitted: Ics Ik Value of short-time withstand current specified by the manufacturer that the device is able to handle without damage during a designated time period (short-time delay). In case of alternating current, it is the rms value of the alternating component of the assumed short-circuit current Ip.
Rated normal current EN 60947-1; 4.3.2.4 Rated ultimate short-circuit breaking capacity EN 60947-2; 2.15.1; 4.3.5.2.1
Iu
Icu
Ics
Rated short-time withstand current EN 60947-1; 4.3.6.1 EN 60947-2; 4.3.5.4 EN 60947-3; 4.3.6.1
Icw
Modeion
GLOSSARY OF TERMS
Note: Precise wording of definitions and texts relating to a given term are detailed in the respective standards (see Name).
Name Rated short-circuit making capacity EN 60947-1; 4.3.6.2 EN 60947-2; 4.3.5.1 EN 60947-3; 4.3.6.2 Initial peak short-circuit current EN 60909-0; 1.3.5 Surge short-circuit current EN 60909-0; 1.3.8 Prospective short-circuit current EN 60947-1; 2.5.5 EN 60909-0; 1.3.3 Rated pulse withstand voltage EN 60947-1; 4.3.1.3
Symbol Icm
Explanation Value of short-circuit making capacity specified by the manufacturer for the rated operating voltage at the rated frequency and at the established power factor for alternating current or at the time constant for direct current. It is expressed as the maximum assumed peak current. Must fulfil the condition: Icm ip Short-circuit current value at the moment of its arising at a given point in the electrical distribution expressed as the rms value of the alternating symmetrical component of the assumed short-circuit current. Maximum possible momentary value of the assumed short-circuit current. (Corresponds to the moment the short arises, as a result of which there occurs the peak value of the short-circuit current.) Short-circuit current value, which would flow through the circuit if the protection device were replaced and a short circuit were experienced by conductors with negligible impedance. (In a three-phase distribution, it is assumed that the short circuit is simultaneous in all phases.) Peak value of the voltage impulse of the prescribed form and polarity which the device is able to withstand without failure at the established conditions and pertinent to which is the value of the separating air distance. Uimp of the device must be equal to or higher than the value established for momentary overvoltage at the point in the circuit (overvoltage category) where the device is used. Numerically defined level of momentary overvoltage, i.e. overvoltage having its origin in atmospheric or switching. Standard EN 60664-1 establishes for electrical equipment the overvoltage categories: Overvoltage category IV - service entrance, outside lead Overvoltage category III - fixed wiring Overvoltage category II - appliances Overvoltage category I - light-current appliances
Ik ip Ip
Uimp
Rated frequency EN 60947-1; 4.3.3 Utilization category (circuit breakers - time selectivity) EN 60947-2; 4.4
fn
Frequency of the supply network for which the device is proposed and that corresponds to its other characteristics values. Utilization category of circuit breaker establishes whether or not the circuit breaker specifically is intended for providing selectivity by means of intentional time delay (time selectivity) with other protective devices connected in series on the load side in short-circuiting conditions. Utilization category: A - circuit breakers are not specifically intended for providing time selectivity B - circuit breakers are specifically intended for providing time selectivity Utilization category defines the assumed use of switch devices (switch-disconnectors). Characterised by values of current and voltage, expressed as multiples of rated operating current and rated operating voltage, and further by power factors or time constants of the circuit. Utilization category: AC-21B (DC-21B) - infrequent switching of resistive loads, including moderate overloading AC-22B (DC-21B) - infrequent switching of mixed resistive and inductive loads, including moderate overloading AC-23B (DC-23B) - infrequent switching of motor loads or other highly inductive loads. Pollution degree relates to the conditions of the surrounding environment for which the device is intended. Pollution degree: 1 - No contamination will occur, or only dry, non-conducting contamination. 2 - Normally occurs only non-conducting contamination, but sometimes there may occur temporary conductibility due to condensation. 3 - There occurs conductive contamination or dry non-conducting contamination that with the effect of condensation will become conductive. 4 - Contamination generates continuous conductibility, by means of, for example, conductive dust, rain or snow.
S2
Modeion
NOTE