Beruflich Dokumente
Kultur Dokumente
DIGIT TEMPERATURE
PURIFIER INDICATOR SLEEP FUNCTION INDICATOR UV BULB FAILURE NOTICE SMALL: FOR LESS THAN 300 Ft 2 MED : FOR 300-600 FT 2 LARGE: FOR 600-1000 Ft 2
HEATER TIMER
HEATING UP INDICATION
PURIFIER TIMER
DIGIT TEMPERATURE - To show the target temperature. PURIFIER INDICATOR - To show the purifier is working. SLEEP FUNCTION INDICATOR - Indicate that the heater is
ROOM SELECTION LCD DISPLAY HEATER TIMER SLEEP MODE
in the sleep mode. In the mode the heater is working most quietly.
BULB FAILURE NOTICE - The message will show UV
function will work last while the unit is on or indicate the hours that the unit will come back on automatically while the unit is off.
TEMP. POWER ON/OFF UP & DOWN PURIFIER PURIFIER TIMER ON/OFF
will work last while the unit is on. Or indicate the hours that
POWER SWITCH - Turns the power to on (I) or off (O) (Switch
the unit will come back with only purifier function automatically while the unit is off.
HEATING UP INDICATION - To indicate that heater is
room selection, temperature setting, purifier on/off, heating function on/off and the failure notice of the heater.
TEMP. UP & DOWN - The button is used to adjust target
heating up. The fan will not operate while the unit is heating up.
COOLING DOWN INDICATION - To indicate that heater is
cooling down. The fan will automatically turn off when the heaters has cooled down to the factory set temperature.
PURIFIER TIMER - To show the hours that the purifier
of the heater.
PURIFIER ON/OFF - To turn on the purifier of the heater
separately while the unit is off. Or use to turn on or turn off the purifier the heater while the unit is heating.
SLEEP MODE - To switch the unit to sleep mode that the unit
Place
the air intake and air outlet are clear of obstructions. Plug the heater into a 120~60Hz power outlet. .
Press down the power switch located on the rare of the
set the desired warmth. The temperature range will be 60-90 Fahrenheit degree. The heater will warm the room to the target temperature. Then the heater will maintain the warmth
automatically.
Turn off the heater: Press the power button shut off the
default on. The heating function, PCO, UV lamp will work to heat and purify with the heater is powered on.
Purifier timer: Press the purifier timer button to set the time
heater. The fan will continue to run until all of the heat has been expelled and will then turn off. The Cooling down will show on the LCD display to indicate that the heater is cooling down.
that the purifier will run for. The purifier function will work continuously without the timer setting.
Heater timer: Press the heater timer button to set the hours
that the heater will work for. The heater will shut off while the hours run out. The heating function will work continuously without the timer setting.
Room selection: Press the room selection button to select
room size that the heater will be used in. The small room for less than 300 ft 2, med room for 300-600 ft 2 and large room for 600-1000 ft 2.