Beruflich Dokumente
Kultur Dokumente
Problem Description
Lose channels
Video and audio are neither not clear when playing program
Some problems about audio, for example small audio volume, not clear, no audio.
Some problem about video, for example not clear, no video, lack some color in the video.
The system cann't boot up. sometimes LED is on or show "BOOT", sometimes display Logo The system can boot up, but no video and audio, maybe can change channel Stay in the OTA process when stare-up
10 11
12 13 14 15
sometime cann't get signal from RCU(remote control unit) when insert smart card, the box still show "bad card" It shows "upgrade software" sometimes when playing program. there are some problems when long time work
Power Board
1 2 3 Burn down, maybe have black trace and doesn't work. Doesn't work and not output. voltages are not unstable.
Checked
Yes
Yes
No
No
No
Yes
Yes
Yes
No
No Yes
firstly check if the RCU is Ok, and then Check if the front panel is OK, which one is not ok, change it. Change the smart card slot. Upgrade the newest and formal software version by USB After long work, the temperature is high inside the box, disconnection on some IC-chip happen. Repair welding or change it. Check if the fuse(F1), TNR1, diode(D1,D2,D3,D4) are ok, and change them Check if the IC1 voltage is normal, if IC1 is ok, and then change R5, ZD1 and D6. Firstly change IC3. if it still doesn't work, change IC2.