Beruflich Dokumente
Kultur Dokumente
NEOPREX
Vivan Engenharia
Version 0.1 Updated at: February/16/2000
kN kN rad rad kN kN mm mm
lenght of bearing:
thickness of elastomer layer: t
200 250 10 1 6
mm mm mm MPa factor
20 unities 1 unities
Resultant long term displacement Resultant short term displacement Maximum compressive stress Maximum allowable compressive stress Minimum compressive stress Minimum allowable compressive stress tmin - sliding condition - dead loads tmin - sliding - total loads tmin - limitation of long term horizontal displacement tmin - limitation of horizontal displacement tmax - stability criteria Deflection under total load - according to EN Allowable rotation under total load - according to EN
0.0 mm 0.0 mm 5.00 5.00 2.00 1.80 0.0 0.0 0.0 0.0 50.0 2.623 3.94E-02
MPa MPa MPa MPa mm mm mm mm mm mm rad
s allow. dead load max. Italian St. s allow. max. Italian Standard s allow. max. NBR - precasted struct. s allow. min. Italian Standard s allow. max. EN-1337
UIC - CODE - VERIFICATION Deflection under total load Allowable rotation - total load (K=1) Deflection under dead load. Allowable rotation under dead load.
mm rad
mm rad
Elastomer nominal strain due to compressive loads Elastomer shear strain due to horizontal loads Elastomer nominal strain due to angular rotation Elastomer total strain
Error 26
Laminated bearings
Customer: Structure: Local: Date:
NEOPREX - EN 1337
Vivan Engenharia
Version 0.0 Updated: 20/01/2000
kN kN rad rad kN kN mm mm
lenght of bearing: single layer thickness: ti total elastomer thickness = n.ti G fyk friction: concrete (6) ; others (2)
thickness of outer steel plate thickness of inner steel plate vertical cover thickness horizontal cover thickness n of bearings - for installation n of bearings - for testing
3 3 2.5 4 4 1
mm mm mm mm unities unities
Resultant long term displacement Resultant short term displacement Compressive stress - overall plan area of bearing Compressive stress - reduced area Dead load compressive stress - reduced area Tmin - sliding condition - dead loads Tmin - sliding condition - total loads Tmin - maximum horizontal displacement condition Ttmax stability condition Sum of deflections - inner layers Sum of deflections - covering layers Total bearing deflection Allowable rotation - stability criteria Allowable rotation neglecting covering layers Long term additional rotation - strain limitation 5 Elastomer nominal strain due to compressive loads Elastomer shear strain due to horizontal loads Elastomer nominal strain due to angular rotation Elastomer total strain inner layers Elastomer total strain covering layers Minimum thickness - inner steel reinforcing plates
10.0 9.1 10.00 11.80 4.91 10.3 18.6 27.3 87.4 2.527 0.058 2.585 4.04E-02 3.95E-02 4.41E-03 2.82 0.66 1.10 4.58 4.01 1.17
Shape factor Covering layer shape factor H total smax allowable - reduced area smin allowable - reduced area Unit volume Total volume - purchase UIC - CODE - VERIFICATION Sum of deflections - inner layers Sum of deflections - covering layers Total bearing deflection Allow. rot. - stability criteria (K=1) Allow. rot. SC K=1 - neglecting cover Long term allowable rotation
mm