Beruflich Dokumente
Kultur Dokumente
ENG
Log Planer
MKM-300-5
Compressed air
Lower cutter Pressing & guiding
work pressure 6 bar (0,6 MPa)
V unit
connection 1/2"
Optional accessories
• Profiling equipment for boards
- thickness < 50 mm
• Feeding table lubrification system
Working principle
Automated Log Planer Line
Log Planer Line
Makron MKM-300-5 Log Planer Line is an efficient and
versatile profiling line for log house manufacturers of
today and the future.
MKM-300-5 is specially designed for round or
rectangular logs or even for both, to meet the
customer's specific requirements.
Makron Engineering Oy
Technical data
P.O.Box 104 (Norokatu 5)
FI-15101 LAHTI, FINLAND
Tel. +358 3 812 312 Log Planer MKM-300-5
Fax +358 3 733 1299
makron@makron.fi
Main dimensions Power of main motors Spindles
www.makron.fi
length 4850 mm lower cutter I 18.5 kW - diameter Ø 50 h6
width 2000 mm side cutter, right II 30 kW - usable length of shaft 275 mm (horizontal spindles)
height 2250 mm side cutter, left III 30 kW - usable length of shaft 250 mm (vertical spindles)
working level 885 mm upper cutter IV 18,5 kW - speed 4000 r/min
weight, net approx. 7600 kg lower cutter V 18,5 kW
feeding motor 5,5 kW Sawdust suction
Log dimensions raise of front table 0.37 kW Suction inlet diameters:
height 50 - 300 mm total power 122 kW lower cutter I Ø 200 mm
width 70 - 300 mm side cutter, right II Ø 200 mm
length, min approx.1800 mm Electrical power connection side cutter, left III Ø 200 mm
voltage 400 V upper cutter IV Ø 200 mm
control voltage 230 V lower cutter V Ø 160 mm
nominal current 186 A
Log feeding system
- roller size, feeding speed Ø 200 mm, 4 – 25m/min
- pressing force 10 kN, pneumatic
Automated
Log Planer Line (log length 12 m)
Space requirement 39 m x 8 m
Log dimensions length 3 – 12 m
Rectangular log height 50 – 300 mm
thickness 70 – 300 mm Example
Round log max. Ø 300 mm
Speed 4 – 25 m/min
layout