Sie sind auf Seite 1von 2

Atlas Copco

Heatless Adsorption Compressed Air Dryers CD 1+-22+ Series

3 2

1 High-quality components provide fail-safe operation. Designed for low pressure drop and increased reliability 2 As standard, filled with high-performance molecular sieves, allowing use for the various pressure dewpoints required (-40C and -70C). Overfilled cartridges protect against desiccant ageing and overflow peaks. Integrated after-filters ensure fast and clean maintenance 3 Multi-port inlet and outlet ensure easy connection to air system. The dryer can be installed vertically or horizontally 4 Integrated silencers ensure extremely low noise 5 Full electronic controller with purge saver function. Sophisticated electrical panel IP65 protected against water and dust
5 4

Features and Benefits


Enduring Performance
Designed, built and tested to meet the toughest conditions in the compressor room and at point-of-use applications Non-return valves and purge orifices are built into the polycarbonate cartridges. The extrusions are made from aluminium to prevent corrosion Each desiccant cartridge includes an integrated after-filter, which saves space, simplifies installation and decreases the chance of leaks through fittings and connections. Working pressures up to 16 bar(g) and temperatures up to 50C

Ease of Operation
The sophisticated controller enables complete annunciation of the dryer and cycle status and automatic fault diagnosis, including alarms No need to disconnect the dryer from the compressed air network for servicing The inlet and outlet can be reversed and the dryer can be operated remotely

Energy Saving & Cost Efficient


Low pressure drop across the whole range Purge Saver function included as standard Adjustable purge to tune down the purge air consumption according to the actual working conditions (option)

Technical Specifications
TYPE CD 1+ CD 1.5+ CD 2+ CD 2.5+ CD 3+ CD 5+ CD 7+ CD 10+ CD 12+ CD 17+ CD 22+ l/s 1 1.5 2 2.5 3 5 7 10 12 17 22 Inlet capacity m3/h 3.6 5.4 7.2 9.0 10.8 18.0 25.2 36.0 43.2 61.2 79.2 cfm 2.1 3.2 4.2 5.2 6.4 10.6 14.8 21.2 25.4 36.0 46.6 Pressure drop mbar(e) 12 50 75 110 185 10 40 75 125 210 340 psi(g) 0.17 0.73 1.09 1.60 2.68 0.15 0.58 1.09 1.81 3.05 4.93 Filter size 3 3 3 3 3 9 9 9 17 17 17

TYPE CD 1+ CD 1.5+ CD 2+ CD 2.5+ CD 3+ CD 5+ CD 7+ CD 10+ CD 12+ CD 17+ CD 22+ mm 106 106 106 106 106 149 149 149 149 149 149 mm 197 197 197 197 197 320 320 320 320 320 320

Dimensions (L x W x H) mm 540 590 720 835 855 640 725 875 1015 1270 1505 inch 4.2 4.2 4.2 4.2 4.2 5.9 5.9 5.9 5.9 5.9 5.9 inch 8 8 8 8 8 13 13 13 13 13 13 inch 21.2 23.2 28.3 32.9 33.7 25.2 28.5 34.4 39.9 49.9 59.3 kg 7 8 9 10 11 19 22 25 29 35 44

Weight lbs 15.4 17.6 19.8 22.0 24.3 41.8 48.5 55.1 63.9 77.2 97.0

Reference conditions: Compressed air inlet temperature: 35C/95F Compressed air inlet pressure: 7 bar(g)/102 psi(g) Inlet relative humidity: 100% Pressure dewpoint: -40C / -40F To adjust the performance of each dryer for different inlet conditions, use the correction factors below:

Pressure Dewpoint Correction (Kd):


C CD 1+ -22+ F Kd -40 -40 1 -70 -100 0.7

Inlet temperature correction factor (Kt):


C CD 1+ -22+ F Kt 20 68 1.07 25 77 1.06 30 86 1.04 35 95 1 40 104 0.88 45 113 0.67 50 122 0.55

Inlet pressure correction factor (Kp):


bar(g) CD 1 -22
+ +

4 58 0.62

5 73 0.75

6 87 0.87

7 102 1

8 116 1.12

9 131 1.25

10 145 1.37

11 160 1.50

12 174 1.62

13 189 1.75

14 203 1.87

15 218 2

16 232 2.12

psi(g) Kp

Example: What is the capacity of a CD 7 +, working at 8 bar(g)/116 psi(g), with an inlet temperature of 40C/104F and with a required pressure dew point of -70C/-100F? Find each correction factor: Kd=0.7 Kt=0.88 Kp=1.12 Actual capacity = Norminal capacity x Kd x Kp x Kt 7 x 0.7 x 0.88 x 1.12 4.8 l/s or 10.2 cfm

www.atlascopco.com

2935 0803 40 Printed in Belgium Subject to alteration without prior notice. Never use compressed air as breathing air without prior purification in accordance with local legislation and standards.

Das könnte Ihnen auch gefallen