Beruflich Dokumente
Kultur Dokumente
Page 1 of 2
AZTECH TECHNOLOGIES
it will be around 25Mbps and 12.5Mbps after the 2nd WL556E. Actual throughput might be lower than this after taking in consideration walls and other interference in the wireless medium. 6. Where is the ideal location that I can place the WL556E? Answer: It would be best to place the WL556E to a location where it can receive about 30% to 50% of the signal from your wireless AP/router to avoid having disconnections from the wireless AP/router and packet drops. Ideally, about 10 to 20 meters away from the wireless AP/router. 7. Why can't the WL556E connect to my wireless AP/router when I pressed the WPS buttons on both the devices? Answer: The WPS button on the WL556E is meant for connecting wireless client devices to the WL556E. To use this function, simply press the WPS button on the WL556E (3-5 seconds) until the LED start blinking and then press the WPS button on your wireless client within 2 minutes. 8. Can I use the WL556E with my old wireless-G AP/router? Answer: Yes. Even if the WL556E is a wireless-N repeater, it is backward compatible with wireless b and g devices including AP and clients.
Page 2 of 2