Beruflich Dokumente
Kultur Dokumente
10A GAUGE
15A DOME
22 3B
11 3B RW
16 3B RW
C9 Combination Meter
Seat Belt
2 BR
11 LW
12 GY
18 4B
3 IG1
1 IG1
LW
4 Buckle SW
21 4B
1 WB
2 IG1
172
2004 COROLLA (EWD533U)
WB
BR
GY 3 1
System Outline Current is always applied from the DOME fuse to TERMINAL 5 of the combination meter. When the ignition SW is turned to ON position, the current from the GAUGE fuse flows to TERMINAL 4 of the combination meter and flows TERMINAL 1 of the front passenger seat belt warning light. Seat Belt Warning System When the ignition SW turned on, a signal is input to the combination meter. To determine whether the driver has fastened the seat belt, a signal is input from the buckle SW LH to TERMINAL 12 of the combination meter. When the seat belt is not fastened, the seat belt warning light in the combination meter blinks, and emits a warning sound. In addition, the front passenger is recognized by a sensor (Occupant detection sensor) is installed in the front passenger seat, and determines whether the seat belt is fastened. When not fastened, the signals from the occupant detection sensor is input to TERMINAL 11 of the combination meter, and the front passenger seat belt warning light blinks. Service Hints B6 Buckle SW LH 31 : Open with the drivers seat belt in use C9 Combination Meter 5Ground : Always approx. 12 volts 4Ground : Approx. 12 volts with the ignition SW at ON position 1Ground : Always continuity : Parts Location
Code B6 B7 C9 34 34 34 See Page Code F7 J3 J6 35 35 35 See Page Code J7 35 See Page
: Relay Blocks
Code 1 22 See Page Relay Blocks (Relay Block Location) Engine Room R/B (Engine Compartment Left)
: Ground Points
Code EB IE IG 38 40 40 See Page Ground Points Location Left Side of the Cylinder Head Behind the Combination Meter Right Kick Panel
173
2004 COROLLA (EWD533U)