Beruflich Dokumente
Kultur Dokumente
UNISTRUT
Metal Framing
ELECTRICAL CONSTRUCTION
APPLICATION,
INSTALLATION,
SPECIFICATION
GUIDE
UNISTRUT
Metal Framing
TM
INTRODUCTION
The Unistrut metal framing system includes an exclusive
combination of channel, fittings and hardware listed under new
UL classification 5B. This classification covers strut-type channel
raceways and fittings for use in accordance with Article 352 of the
National Electrical Code, NFPA 70. Included are metal strut-type
channel raceways at least .071 inch (1.81mm) thick and metal or
non-metal closure strips at least .040 inch (1.02mm) thick.
Simple as 1,2,3
Guide Specification . . . . . . . . . . . . . . . . . . 19
Note: All dimensions in parenthesis are
millimeters, unless otherwise indicated.
TM
P2855
Knockout
connection
system
Slot-down
connection
system
P1000 KO
P2535
P1000
P3184
P2521-75
P2540
P2603
P3184
P1280W
P2763
Plug-in
system
P2537
P1000
P2521-75
P3184
P2855
P1000
P1006-1420
Slotted
channel
attachment
system
P2855
P1000 T
HHCS series
P2855
P1280W
P100 KO
H.I.D.
knockout
mounted
system
P1280W
P2536
P3184
P2855
P100 KO
High-bay
dual
mounted
system
P3184
P2763
P2602
P2761
P2521-75
H.I.D. plug-in
system
(with swivel)
P2855
P1280W
P3184
H.I.D. plug-in
system
(rigid mount)
P1000
P1000
P2535
P2855
M2250
P2855
P2855
P2535
Uplighting with
underhung or
remote ballast
P100 KO
P3184
P2521-75
MOUNTING OPTIONS
A variety of clamps simplifies attachment to structural beams.
P1379-S
P2867
P3087
P2675P2676
P2785P2786
(use in pairs only)
Other mounting options include concrete inserts, expansion anchors and powder-actuated fasteners.
TM
CHANNEL
UNISTRUT
P1000
P1101
P1100
14 gage (1.9)
1 5/8" (41.3)x
1 5/8" (41.3)
16 gage (1.5)
1 5/8" (41.3)x
1 5/8" (41.3)
16 gage (1.5)
1 5/8" (41.3)x
13/16" (20.6)
P2000
P2001
P5001
P5000
14 gage (1.9)
1 5/8" (41.3)x
3 1/4" (82.6)
12 gage (2.7)
1 5/8" (41.3)x
3 1/4" (82.6)
P3000
14 gage (1.9)
1 5/8" (41.3)x
1 3/8" (34.9)
P4001
P4000
14 gage (1.9)
1 5/8" (41.3)x
3 1/4" (82.6)
14 gage (1.9)
1 5/8" (41.3)x
1 5/8" (41.3)
12 gage (2.7)
1 5/8" (41.3)x
1 3/4" (44.5)
12 gage (2.7)
1 5/8" (41.3)x
7/8" (22.2)
12 gage (2.7)
1 5/8" (41.3)x
3 1/4" (82.6)
12 gage (2.7)
1 5/8" (41.3)x
1 5/8" (41.3)
P3301
P3300
12 gage (2.7)
1 5/8" (41.3)x
6 1/2" (165.1)
P5500
P3001
12 gage (2.7)
1 5/8" (41.3)x
2 7/16" (61.9)
14 gage (1.9)
1 5/8" (41.3)x
2 3/4" (69.9)
P5501
12 gage (2.7)
1 5/8" (41.3)x
4 7/8" (123.8)
KO
9/16" holes on
1 7/8" centers
7/8" knockouts
on 6" centers
DS
H3
9/16" holes on
1 7/8" centers
CONCRETE INSERTS
CLOSURE STRIPS
8"
(203.2)
P3712P
Optional plastic filler to
prevent concrete seepage.
Wt.
Lgth Lbs/C
P 3249
P 3250
P 3251
P 3252
P 3253
P 3254
P 3255
P 3256
3"
4"
6"
8"
12"
16"
20"
24"
85
100
130
159
227
270
357
399
Wt.
Lgth Lbs/C
P 3257
P 3257A
P 3258
P 3259
P 3260
P 3261
P 3262
P 3263
32"
36"
40"
4'
5'
6'
7'
8'
527
616
661
786
1003
1173
1390
1560
Wt.
Lgth Lbs/C
P 3264
P 3265
P 3266
P 3267
P 3268
P 3269
P 3270
9'
10'
12'
14'
16'
18'
20'
1741
1947
2334
2717
3116
3530
3882
P3184 P
Material: GE Noryl
Wt. 9.4 Lbs. / C Ft.
(14.0 kg/100 m)
Standard length -10 feet.
P3184
Material: Steel
Wt. 47 Lbs. / C Ft.
(69.9 kg/100 m)
NUTS/HANGERS
NUTS
Part
Number
Thread WT.
Size
Lbs/C
P10061420
P1007
P1008
P1009
P1010
1/4"
5/16"
3/8"
7/16"
1/2"
Part
Number
P40061420
P4007
P4008
P4009
P4010
20 7
18 6
16 10
14 9
13 12
P1012S 5/8" 11 21
P1023S 3/4" 10 21
P1024S 7/8" 9 21
Thread
Size
1/4"
5/16"
3/8"
7/16"
1/2"
Part
Number
WT.
Lbs/C
20
18
16
14
13
7
6
9
9
8
P4012S 5/8" 11
P4023S 3/4" 10
11
11
P30160632
0832
1024
1420
#6
#8
#10
1/4"
WT.
Lbs/C
32
32
24
20
2
2
4
4
P55061420 1/4"
P5507 5/16"
P5508 3/8"
P5509 7/16"
P5510 1/2"
Thread
Size
20
18
16
14
13
1
6
10
10
12
Part
Use With
Number Channel
P2537
A
1 58"
(41.3)
9
P1000
P1100
P2000
P3000
In
A
mm
Weight/C
Lbs kg
2 7/16
61.9
19
8.6
P5537
P5500
3 1/4
82.6
22 10.0
P2539
P1000
P1100
P2000
1 3/4
44.5
17
P3539
P3000
1 1/2
38.1
15
6.8
P5539
P5500
2 9/16
65.1
18
8.2
1
4" X 1" RHMS and
Sq. Nut Included
P2539
P3539
P5539
Design Load
120 Lbs. (.5 kN)
1 8"
(41.3)
7.7
4" X 34"
Carriage Bolt
and Sq. Nut Included
RACEWAY HANGERS
P2755
P2756
P2757
Part
Number
4 14"
(108.0)
Design Load
120 Lbs. (.5 kN)
32" (7.1)
Sq. Hole
A
mm
Weight/C
Lbs
kg
P2755 9/16
P2756 7/8
P2757 13/32
14.3
22.2
10.3
44
44
44
20
20
20
P2855 9/16
P2856 7/8
P2857 13/32
14.3
22.2
10.3
32
32
32
14.5
14.5
14.5
In
P2855
P2856
P2867
2 34"
(69.9)
32" (7.1)
Sq. Hole
Design Load
120 Lbs. (.5 kN)
FINISHES
Pregalvanized channel is coated with zinc by hot-dipped process prior to roll forming of press operations. The zinc weight coating is
0.45 oz./side per square foot of material conforming to ASTM specification A-653.
Electro-galvanized parts, screws and nuts are coated with zinc electrolytically to commercial standards. (Federal Specification No. QQ-Z-325A.)
Hot-dipped galvanized material is coated with zinc after being roll formed or after all manufacturing operations are completed. The zinc weight
is 2 oz. per square foot of surface conforming to ASTM specifications Nos. A-123 and/or A-153.
Nuts, bolts and pipe clamps are electro-galvanized.
(Alternate finishes may be specified, such as pregalvanized finish and hot-dipped galvanized finish for various parts of the metal framing
system. Refer to Unistrut General Engineering Catalog #12 and supplementary bulletins for the availability and appropriateness of the finish for
various parts.)
TM
ELECTRICAL ACCESSORIES
UNISTRUT
P2535
Design Load
400 Lbs (1.3 kN)
P2536
1 332" (27.8) Dia.
Design Load
200 Lbs (1.3 kN)
1 58"
(41.3)
4"
(101.6)
Wt./C 28 lbs. (12.7 kg)
5 18"
(130.2)
Wt./C 36 lbs. (16.3 kg)
P2522
P3521-50
P3000
2 14"
(57.2)
6 14"
(158.8)
3 Knockouts
7
8" (22.2) Dia.
P2521-50
P2521-75
P5500
P5521-50
P5521-75
2 116"
(52.4)
1 38"
(34.9)
Part
Conduit Size A
Number
In
P2521-50
1/2
P2521-75
3/4
Weight/C
Lbs kg
27 12.2
26 11.8
Part
Conduit Size A
Number
In
P5521-50
1/2
P5521-75
3/4
P1000
1 38"
(34.9)
P5021-50
P5021-75
Conduit Size A
In
1/2
3/4
Conduit Thread
P2521-100
Part
Number
END CONNECTORS
FOR 1 CONDUIT
Tapped for 1"
P5500
P5021-50
P5021-75
Weight/C
Lbs kg
27 12.2
26 11.8
2 116"
(52.4)
Weight/C
Lbs kg
31
30
14.1
13.6
ELECTRICAL ACCESSORIES
END CONNECTOR FOR 1 CONDUIT
P5021-100
P5000
P5500
Material: 12 gage (2.7)
Wt/C 24 Lbs (10.9 kg)
P5521-100
1
4" X 58" Flat Head
Machine Screw and
P3016-1420 Nut
Included
1 58"
(41.3)
1 58"
(41.3)
USE
WITH
P1180 W
P1280 W
P2280 W
P3280 W
P4280 W
P5280 W
P5580 W
P1100
P1000
P2000
P3000
P4000
P5000
P5500
WEIGHT/C
Lbs
kg
12
11
11
8
5
22
18
5.4
5.0
5.0
3.6
2.3
10.0
8.2
3 1/2"
(88.9)
6 23/32"
(170.6)
2 1/8"
(54.0)
5/16" (7.9)
Dia. Hole
Hole
.600" Dia.
(15.2)
1 7/8"
(47.6)
.800"
(20.3)
SPACER CLEVIS
P2541
1
8"
(3.2)
1.100"
(27.9)
P2603
P2540
P2540A
UNISTRUT Channel
A
P2541
P2540 Wiring
Stud Nut
2"
(50.8)
Flourescent Fixture
1 2132"
(42.1)
2"
(50.8)
Material: Sintered metal.
4"
(101.6)
PART
NUMBER
P2540
P2540 A
1-1/8
5/8
28.6
15.9
WEIGHT/C
Lbs
kg
10
8
4.5
3.6
P3116-125
1 12"
(38.1)
4" x 20 Thd.
CONDUIT SIZE A
In
mm
1 12"
(38.1)
1 316"
(30.2)
TM
ELECTRICAL ACCESSORIES
UNISTRUT
SPLICE FITTINGS
Assembly Use
Number With
Channel
P3922 P3926
A
Threaded
Plate Nut
3
6 4"
(171.5)
A
In
mm
Clevis
Back
Plate
Number Clevis
Nut
Number Number
Weight/C
Lbs
kg
P1000
P3922 P1100 1 5/8 41.3 P2377
P2000
P2517
P2869
100
45.4
P2517
P2869
97
44.0
P2517
P2869
80
36.3
P5517
P2869
103
46.7
P5017
P2869
106
48.1
P2534-50
P2534-75
4 1316"
(122.2)
2"
(50.8)
Design Load
300 Lbs. (1.3 kN)
2 Holes
9
Ground Wire
Bushing
Not Included
15
15
2"
(50.8)
(.08)
(.08)
IN-CHANNEL JOINERS
P2900
P2902
P2901
P2903
P1000
P1000
P1000
P1000
BRACKETS
P2513AP2516A
2"
2" (50.8)
2"
P2513 P2516
(50.8)
(50.8)
1
4"
4"
P2542 P2546
13
16"
(20.6)
(6.4)
(6.4)
3
3 4"
3 34"
(95.3)
(95.3)
6 14"
(158.8)
8"
10
Part
Number
Std.
Lengths
Part
Number
Std.
Lengths
P2513A
P2514A
P2515A
P2516A
6"
12"
18"
24"
P2513
P2514
P2515
P2516
6"
12"
18"
24"
Part
Number
Std.
Lengths
P2542
P2543
P2544
P2545
P2546
12"
18"
24"
30"
36"
(9.5)
P1001
ELECTRICAL ACCESSORIES
DUPLEX GROUNDED RECEPTACLE
P2553
Wire Connectors
P2557
Oval Head
#6-32 X 1"
6"
(152.4)
P3016-0632
P3184 Closure
RECEPTACLE BOX
P2761
P2762
8" Knockout
14"
x 58"
Part
Number
Outlet
P2761
P2762
Single
Duplex
Weight/
Lbs
kg
88
88
39.9
39.8
Includes Nuts
and Screws
P3016-1420
RECEPTACLE UNIT
P2763
P2764
P2765
8" Knockout
14"
x 58"
Part
Number
Outlet
Weight/
Lbs
kg
P2763
P2764
P2765
125V
250V
277V
108
108
108
49
49
49
NEMA
Receptacle
Configuration
5-15R
6-15R
7-15R
Includes Nuts
and Screws
P3016-1420
JUNCTION BOXES
P2810
Wt./C 135 lbs (61.2 kg)
P2811
Wt./C 155 lbs (70.3 kg)
P2812
P2814
P2813
Wt./C 175 lbs (79.4 kg)
11
TM
ELECTRICAL ACCESSORIES
UNISTRUT
P2647 A
through
P2647 F
Hole Size
A
B
4"
(101.6)
A
Use with steel clamp and Everdur hardware. Order clamp separately.
Material: Dry process porcelain white glaze.
Assembly
Number
Order Steel
Clamp
Number
P1787 A
P1787 B
P1113 E
P1787 C
P1788
mm
3/8
9.5
1/2
12.7
5/8
15.9
3/4
19.1
7/8
22.2
P1788 B
P1788 C
A
In
1 7/8
Weight/C
mm
47.6
Lbs
kg
54
24.5
53
24.0
51
23.1
Assembly
Number
B
In
P2647 A
8 1/2
215.9
7.1
421
191.0
P2647 B
9 1/2
241.3
13/16 20.6
465
210.9
P2647 C 10 1/2
266.7
1 5/16 33.3
509
230.9
P2647 D 11 1/2
553
250.8
P2647 E
12 1/2
317.5
2 3/8 60.3
597
270.8
P2647 F
13 1/2
342.9
2 7/8 73.0
10
631
286.2
89
40.4
25.4
84
38.1
1 1/8
28.6
81
36.7
P1789
1 1/4
31.8
122
55.3
P1789 A
1 3/8
34.9
119
54.0
P1789 B
1 1/2
38.1
114
51.7
P1789 C
1 5/8
41.3
111
50.3
P1790
1 3/4
44.5
238
108.0
P1790 A
1 7/8
47.6
232
105.2
P1790 B
50.8
221
100.2
P1790 C
2 1/8
54.0
217
98.4
2 1/4
57.2
274
124.3
2 3/8
2 1/2
60.3
63.5
267
259
121.1
117.5
2 5/8
66.7
252
114.3
P1792
2 3/4
69.9
347
157.4
P1792 A
2 7/8
73.0
336
152.4
P1792 B
76.2
325
147.4
P1792 C
3 1/8
79.4
314
142.4
P1793
3 1/4
82.6
495
224.5
P1793
3 3/8
85.7
480
217.7
P1793 A
3 1/2
88.9
465
210.9
P2647 A P1113 E
P1793 C
3 5/8
92.1
450
204.1
P1691
P1115 E
1/2
P1794
3 3/4
95.3
712
323.0
P1692
P1117 E
P1794 A
3 7/8
98.4
696
315.7
P1693
P1794 B
101.6
683
309.8
P1794 C
4 1/8
104.8
670
303.9
P1795
4 1/4
108.0
645
4 3/8
111.1
4 1/2
114.3
P1117 E
P1119 E
P1791
P1791 A
P1791 B
P1791 C
P1795 A
P1795 B
P1120 E
P1120 E
P1121 E
P1123 E
P1124 E
P1124 E
2 3/8
2 7/8
60.3
73.0
101.6
4 1/2
114.3
4 1/2
114.3
5 1/8
6 1/8
7 1/4
7 1/4
130.2
155.6
184.2
184.2
Weight/C
Lbs
kg
mm
9/32
mm
No. Bus
Sepa- No. Bars
rators Per Leg
In
42.6
P1115 E
94
P1788 A
12
Hole Size
In
7 38"
(187.3)
P1690
through
P1697
Hole Size
Hole Size
In
Weight/C
Lbs
kg
In
mm
15.9
1 1/2
38.1
24
10.9
12.7 25.4
2 1/8
54.0
42
19.1
2 5/8
66.7
54
24.5
76.2
65
29.5
P1694
3 5/8
92.1
84
38.1
292.6
P1695
P1120 E
4 1/8 104.8
107
48.5
632
286.7
P1696
P1121 E 2 1/4
57.2 76.2
4 5/8 117.5
123
55.8
617
279.9
P1697
P1123 E
163
73.9
mm
5/8
1
ELECTRICAL ACCESSORIES
CABLE SADDLES
P1753 FG
P1754 FG
P1753 PO
P1754 PO
2"
(50.8)
Assembly
Number
In
mm
Maximum
Cable Diameter
In
mm
P1753 FG
2 13/16
71.4
P1754 FG
3 3/4
95.3
4 1/2
P1753 PO
76.2
P1754 PO
101.6
3
4 1/2
Weight/C
Lbs
kg
76.2
12
5.4
114.3
17
7.7
76.2
75
34.0
114.3
95
43.1
1 58"
(41.3)
Assembly
Number
Hole Size
In
Hole Size
P2649 A
P2649 B
1 1/2
P2649 C
P2649 D
P2649 E
P2649 F
P2649 G
P2649 H
11/2
2
2 1/2
2 1/2
3
A
mm
3 1/2
3 1/2
In
25.4
25.4 38.1
mm
Weight/C
Lbs
kg
mm
In
76.2
1 3/4
44.5
31
14.1
3 1/2
88.9
50.8
38
17.2
38.1 50.8
101.6
2 1/4
57.2
47
21.3
50.8 63.5
4 1/2
114.3
2 1/2
63.5
57
25.9
30.8
63.5 76.2
127.0
2 3/4
69.9
68
76.2 88.9
5 1/2
139.7
76.2
80
36.3
88.9 101.6
152.4
3 1/4
82.6
94
42.6
over 4
over 101.6
P2645 A
through
P2645 H
3/8" studs, square nuts
and washers included.
Assembly
Number
In
Hole Size
P2645 B
1 1/2
P2645 D
P2645 E
Order channel
nuts as required.
P2645 F
P2645 G
Material: Paraffin
impregnated maple hardwood.
mm
P2645 A
P2645 C
P2645 H
A and B
Dimensions
In
mm
Hole Size
1 1/2
2
2 1/2
2 1/2
3
3 1/2
3 1/2
over 4
Weight/C
Lbs
kg
25.4
3 1/2
88.9
84
25.4
38.1
101.6
102
38.1
46.3
38.1
50.8
4 1/2
114.3
121
54.9
74.8
50.8
63.5
5 1/2
139.7
165
63.5
76.2
152.4
189
85.7
76.2
88.9
6 1/2
165.1
215
97.5
177.8
243
110.2
88.9 101.6
over 101.6
SWIVEL HANGERS
M2037
M2050
M2137
M2150
M2250
Wt./C 18 lbs (8.2 kg)
1 34"
8"
(44.5)
(9.5) Dia.
8"
8"
B
(9.5) Dia.
1"
(9.5) Dia.
(24.5)
1"
(24.5)
A
B
Part
Number
M2037
M2050
M2137
M2150
3/8" - 16
1/2" - 13
3/8" - 16
1/2" - 13
In
2 31/32"
2 3/4"
2 29/32"
2 3/4"
mm
67.5
69.9
67.5
69.9
Weight/C
Lbs
kg
23
32
27
45
10.4
14.5
12.2
20.4
2" - 13 Thd.
1 4"
(44.5)
1
2" - 13 Thd.
M2350
Wt./C 20 lbs (9.1 kg)
13
TM
TECHNICAL DATA
UNISTRUT
mm
24
610
36
914
48
1219
60
1524
Channel
P1000
P1001
P1100
P1101
P2000
P2001
P3000
P3001
P3300
P3301
P4000
P4001
P4100
P4101
P5000
P5001
P5500
P5501
P1000
P1001
P1100
P1101
P2000
P2001
P3000
P3001
P3300
P3301
P4000
P4001
P4100
P4101
P5000
P5001
P5500
P5501
P1000
P1001
P1100
P1101
P2000
P2001
P3000
P3001
P3300
P3301
P4000
P4001
P4100
P4101
P5000
P5001
P5500
P5501
P1000
P1001
P1100
P1101
P2000
P2001
P3000
P3001
P3300
P3301
P4000
P4001
P4100
P4101
Maximum
Allowable
Uniform Load
Lbs
kg
1690
767
3130*
1420*
1390
630
1850*
839*
1170
531
1370*
621*
1290
585
2660*
1207*
600
272
1660*
753*
400
181
690*
313*
440
200
910*
413*
5260
2386
6170*
2799*
3280
1488
4680*
2123*
1130
513
3130*
1420*
930
422
1850*
839*
780
354
1370*
621*
860
390
2410
1093
400
181
1130
513
270
122
690*
313*
300
136
790
358
3510
1592
6170*
2799*
2190
993
4680*
2123*
850
386
2400
1089
700
318
1850*
839*
590
268
1370*
621*
650
295
1810
821
300
136
850
386
200
91
520
236
220
100
590
268
2630
1193
5650
2563
1640
744
4680*
2123*
680
308
1920
871
560
254
1530
694
470
213
1270
576
520
236
1450
658
240
109
680
308
160
73
420
191
180
82
470
213
14
Deflection At
Uniform Load
In
0.06
0.02
0.06
0.02
0.06
0.01
0.07
0.03
0.10
0.06
0.11
0.04
0.11
0.05
0.03
0.01
0.04
0.01
0.13
0.07
0.13
0.05
0.13
0.05
0.15
0.08
0.22
0.13
0.24
0.14
0.25
0.14
0.07
0.02
0.09
0.03
0.22
0.13
0.23
0.12
0.23
0.11
0.26
0.15
0.40
0.23
0.42
0.25
0.43
0.25
0.12
0.05
0.15
0.08
0.35
0.20
0.36
0.20
0.36
0.20
0.41
0.23
0.62
0.37
0.66
0.40
0.69
0.39
mm
1
1
2
1
1
0
2
1
3
1
3
1
3
1
1
0
1
0
3
2
3
1
3
1
4
2
6
3
6
4
6
4
2
1
2
1
6
3
6
3
6
3
7
4
10
6
11
6
11
6
3
1
4
2
9
5
9
5
9
5
10
6
16
9
17
10
17
10
Column Data
Uniform Load
At Deflection
Span/240
Lbs
kg
1690
767
3130*
1420*
1390
630
1850*
839*
1170
531
1370*
621*
1290
585
2660*
1207*
600
272
1660*
753*
380
172
690*
313*
410
186
910*
413*
5260
2386
6170*
2799*
3280
1488
4680*
2123*
1130
513
3130*
1420*
930
422
1850*
839*
780
354
1370*
621*
860
390
2410
1093
270
122
1130
513
170
77
690*
313*
180
82
790
358
3510
1592
6170*
2799*
2190
993
4680*
2123*
760
345
2400
1089
610
277
1850*
839*
510
231
1370*
621*
500
227
1810
821
150
68
730
331
90
41
410
186
100
45
470
213
2630
1193
5650
2563
1640
744
4680*
2123*
490
222
1920
871
390
177
1530
694
330
150
1270
576
320
145
1450
658
100
45
460
209
60
27
260
118
70
32
300
136
Maximum Column
Load Applied
At C.G. (K= .80)
Lbs
kg
10200
4627
23560
10687
7670
3479
17690
8024
6200
2812
14450
6554
9330
4232
21310
9666
7380
3348
16390
7434
4190
1901
9800
4445
5340
2422
11720
5316
15850
7189
30170
13685
13080
5933
30870
14002
8400
3810
22610
10256
6170
2799
17000
7711
4650
2109
13900
6305
7950
3606
20410
9258
5920
2685
15080
6840
2900
1315
8980
4073
4160
1887
10680
4844
11580
5253
29330
13304
10190
4622
29720
13481
6540
2966
21270
9648
4460
2023
16030
7271
2790
1266
13120
5951
6600
2994
19160
8691
3830
1737
13260
6015
1650
748
7830
3552
2620
1188
9210
4178
7230
3279
28170
12778
7040
3193
28120
12755
4980
2259
19560
8872
3250
1474
14780
6704
1780
807
12110
5493
5310
2409
17550
7961
2450
1111
10900
4944
1060
481
6350
2880
1680
762
7330
3325
Maximum Design
Load Applied At
Column Face
Lbs
kg
3490
1583
6360
2885
2800
1270
4990
2263
2350
1066
4120
1869
3100
1406
5660
2567
2140
971
4110
1864
1440
653
2650
1202
1630
739
3030
1374
5700
2585
7730
3506
4640
2105
8540
3874
3150
1429
6190
2808
2500
1134
4860
2204
2030
921
4020
1823
2800
1270
5480
2486
1790
812
3820
1733
1140
517
2440
1107
1340
608
2790
1266
5000
2268
7650
3470
4160
1887
8400
3810
2750
1247
5970
2708
2110
957
4690
2127
1550
703
3880
1760
2470
1120
5240
2377
1400
635
3470
1574
830
376
2200
998
1020
463
2500
1134
3950
1792
7540
3420
3480
1579
8190
3715
2360
1070
5690
2581
1750
794
4470
2028
1170
531
3700
1678
2150
975
4940
2241
1080
490
3070
1393
620
281
1920
871
780
354
2180
989
(contd on next page)
TECHNICAL DATA
BEAM AND COLUMN LOADS (CONTINUED)
Beam Data
Span
In
Channel
mm
72
1829
84
2134
96
2438
108
2743
P5000
P5001
P5500
P5501
P1000
P1001
P1100
P1101
P2000
P2001
P3000
P3001
P3300
P3301
P4000
P4001
P4100
P4101
P5000
P5001
P5500
P5501
P1000
P1001
P1100
P1101
P2000
P2001
P3000
P3001
P3300
P3301
P4000
P4001
P4100
P4101
P5000
P5001
P5500
P5501
P1000
P1001
P1100
P1101
P2000
P2001
P3000
P3001
P3300
P3301
P4000
P4001
P4100
P4101
P5000
P5001
P5500
P5501
P1000
P1001
P1100
P1101
P2000
P2001
P3000
P3001
P3300
P3301
Maximum
Allowable
Uniform Loan
Lbs
kg
2110
957
4520
2050
1310
594
3870
1755
560
254
1600
726
460
209
1270
576
390
177
1060
481
430
195
1200
544
200
91
560
254
130
59
350
159
150
68
390
177
1750
794
3770
1710
1090
494
3220
1461
480
218
1370
621
400
181
1090
494
340
154
910
413
370
168
1030
467
170
77
480
218
110
50
300
136
130
59
340
154
1500
680
3230
1465
940
426
2760
1252
420
191
1200
544
350
159
960
435
290
132
790
358
320
145
900
408
150
68
420
191
100
45
260
118
110
50
300
136
1320
599
2830
1284
820
372
2420
1098
380
172
1070
485
310
141
850
386
260
118
710
322
290
132
800
363
130
59
380
172
Deflection At
Uniform Load
In
0.18
0.08
0.24
0.13
0.50
0.28
0.51
0.28
0.52
0.28
0.59
0.33
0.89
0.52
0.93
0.57
0.99
0.56
0.26
0.11
0.34
0.19
0.68
0.39
0.70
0.38
0.72
0.39
0.80
0.45
1.20
0.71
1.25
0.78
1.36
0.78
0.36
0.15
0.47
0.26
0.89
0.50
0.92
0.51
0.91
0.50
1.03
0.59
1.58
0.93
1.70
1.01
1.72
1.03
0.47
0.20
0.61
0.34
1.14
0.64
1.16
0.64
1.17
0.64
1.33
0.75
1.95
1.19
mm
5
2
6
3
13
7
13
7
13
7
15
8
23
13
24
15
25
14
7
3
9
5
17
10
18
10
18
10
20
12
31
18
32
20
35
20
9
4
12
7
23
13
23
13
23
13
26
15
40
24
43
26
44
26
12
5
16
9
29
16
29
16
30
16
34
19
50
30
Column Data
Uniform Load
At Deflection
Span/240
Lbs
kg
2110
957
4520
2050
1310
594
3870
1755
340
154
1600
726
270
122
1270
576
230
104
1060
481
220
100
1080
490
70
32
320
145
40
18
180
82
50
23
210
95
1750
794
3770
1710
950
431
3220
1461
250
113
1240
562
200
91
990
449
170
77
820
372
160
73
790
358
50
23
240
109
30
14
140
64
30
14
150
68
1470
667
3230
1465
700
318
2760
1252
190
86
950
431
150
68
760
345
130
59
630
286
120
54
610
277
40
18
180
82
20
9
100
45
30
14
120
54
1130
513
2830
1284
540
245
2420
1098
150
68
750
340
120
54
600
272
100
45
500
227
100
45
480
218
30
14
140
64
Maximum Column
Load Applied
At C.G. (K= .80)
Lbs
kg
5020
2277
26670
12097
5130
2327
26060
11821
4030
1828
17460
7920
2560
1161
13260
6015
1240
562
10890
4940
4330
1964
15570
7062
1700
771
8080
3665
730
331
4620
2096
1160
526
5240
2377
3810
1728
24830
11263
4060
1842
23540
10678
3390
1538
14980
6795
2120
962
11460
5198
910
413
9440
4282
3620
1642
13240
6006
**
**
5940
2694
**
**
3400
1542
**
**
3850
1746
3070
1393
22670
10283
3380
1533
20560
9326
2920
1324
12120
5498
1810
821
9390
4259
700
318
7770
3524
3080
1397
10570
4794
**
**
4550
2064
**
**
2600
1179
**
**
2950
1338
2580
1170
20170
9149
2900
1315
17120
7765
2540
1152
9570
4341
1580
717
7420
3366
550
249
6150
2790
2450
1111
8350
3787
**
**
3590
1628
Maximum Design
Load Applied At
Column Face
Lbs
kg
3170
1438
7390
3352
2910
1320
7920
3592
2060
934
5360
2431
1500
680
4220
1914
900
408
3490
1583
1860
844
4610
2091
860
390
2640
1197
480
218
1630
739
610
277
1840
835
2640
1197
7200
3266
2510
1139
7590
3443
1820
826
4970
2254
1310
594
3920
1778
710
322
3250
1474
1630
739
4230
1919
**
**
2250
1021
**
**
1370
621
**
**
1550
703
2250
1021
6960
3157
2210
1002
7160
3248
1620
735
4510
2046
1160
526
3560
1615
570
259
2960
1343
1430
649
3800
1724
**
**
1930
875
**
**
1170
531
**
**
1320
599
1970
894
6660
3021
1990
903
6620
3003
1450
658
4030
1828
1040
472
3180
1442
470
213
2640
1197
1230
558
3380
1533
**
**
1670
757
(contd on next page)
15
TM
TECHNICAL DATA
UNISTRUT
Channel
mm
108
2743
120
3048
P4000
P4001
P4100
P4101
P5000
P5001
P5500
P5501
P1000
P1001
P1100
P1101
P2000
P2001
P3000
P3001
P3300
P3301
P4000
P4001
P4100
P4101
P5000
P5001
P5500
P5501
Maximum
Allowable
Uniform Loan
Lbs
kg
90
230
100
260
1170
2510
730
2150
340
960
280
760
230
640
260
720
120
340
80
210
90
240
1050
2260
660
1930
41
104
45
118
531
1139
331
975
154
435
127
345
104
290
118
327
54
154
36
95
41
109
476
1025
299
875
Deflection At
Uniform Load
In
mm
2.18
1.27
2.22
1.27
0.59
0.25
0.78
0.43
1.40
0.79
1.43
0.78
1.41
0.79
1.64
0.93
2.47
1.47
2.65
1.59
2.75
1.61
0.73
0.31
0.96
0.52
55
32
56
32
15
6
20
11
36
20
36
20
36
20
42
24
63
37
67
40
70
41
19
8
24
13
Column Data
Uniform Load
At Deflection
Span/240
Lbs
kg
Maximum Column
Load Applied
At C.G.(K= .80)
Lbs
kg
Maximum Design
Load Applied At
Column Face
Lbs
kg
20
80
20
90
890
2510
420
2150
120
610
100
490
80
400
80
390
20
120
20
70
20
70
720
2260
340
1840
**
2050
**
2330
2230
17330
2550
13610
2240
7750
1400
6010
450
4990
1990
6770
**
**
**
**
**
**
1980
14260
2270
11020
**
1010
**
1140
1760
6280
1800
5970
1310
3610
940
2850
390
2360
1070
3020
**
**
**
**
**
**
1590
5800
1650
5380
9
36
9
41
404
1139
191
975
54
277
45
222
36
181
36
177
9
54
9
32
9
32
327
1025
154
835
**
930
**
1057
1012
7861
1157
6173
1016
3515
635
2726
204
2263
903
3071
**
**
**
**
**
**
898
6468
1030
4999
**
458
**
517
798
2849
816
2708
594
1637
426
1293
177
1070
485
1370
**
**
**
**
**
**
721
2631
748
2440
1. Above loads include the weight of the member. This weight must be deducted to arrive at the net allowable load the
beam will support.
2. Long span beams should be supported in such a manner as to prevent rotation and twist.
3. Allowable uniformly distributed loads are listed for various simple spans, that is, a beam on two supports. If load is
concentrated at the center of the span, multiply load from the table by 0.5 and corresponding deflection by 0.8.
ELEMENTS OF SECTION
Channel
P1000
P1001
P1100
P1101
P2000
P2001
P3000
P3001
P3300
P3301
P4000
P4001
P4100
P4101
P5000
P5001
P5500
P5501
Areas Of
Section
In2
cm2
0.556
1.112
0.417
0.834
0.340
0.681
0.503
1.007
0.398
0.797
0.239
0.478
0.284
0.574
0.897
1.794
0.826
1.453
3.60
7.20
2.70
5.40
2.20
4.40
3.20
6.50
2.60
5.10
1.50
3.10
1.90
3.70
5.80
11.60
4.70
9.40
16
Axis 1 - 1
l
In4
cm4
0.185
7.70
0.930
38.70
0.149
6.20
0.741
30.80
0.124
5.20
0.616
25.60
0.121
5.00
0.693
24.70
0.037
1.50
0.177
7.40
0.023
0.96
0.101
4.20
0.025
1.00
0.114
4.70
1.099
45.70
5.578* 232.20
0.523
21.80
2.811 117.00
S
In3
cm3
0.202
3.30
0.572
9.40
0.166
2.70
0.456
7.50
0.140
2.30
0.379
6.20
0.154
2.50
0.431
7.10
0.072
1.20
0.202
3.30
0.048
0.79
0.125
2.00
0.053
0.90
0.141
2.30
0.628 10.30
1.716* 28.10
0.391
6.40
1.153 18.90
Axis 2 - 2
r
In
cm
0.577
0.915
0.597
0.942
0.605
0.951
0.490
0.767
0.306
0.471
0.308
0.460
0.298
0.447
1.107
1.864
0.848
1.391
1.50
2.30
1.50
2.40
1.50
2.40
1.20
1.90
0.78
1.20
0.78
1.20
0.80
1.10
2.80
4.70
2.20
3.50
In4
cm4
0.236
9.80
0.472 19.60
0.183
7.60
0.366 15.20
0.151
6.30
0.303 12.60
0.205
8.50
0.411 173.10
0.145
6.00
0.289 12.00
0.091
3.80
0.182
7.60
0.106
4.40
0.212
8.80
0.359* 14.90
0.719* 29.90
0.335 13.90
0.669 27.80
S
In3
cm3
In
r
cm
0.290
0.580
0.230
0.450
0.190
0.370
0.250
0.510
0.178
0.356
0.112
0.224
0.130
0.260
0.442*
0.884*
0.410
0.820
4.70
9.50
3.70
7.40
3.00
6.10
4.10
8.30
2.90
5.80
1.80
3.70
2.10
4.30
7.20
14.50
6.80
13.50
0.651
0.651
0.662
0.662
0.667
0.667
0.639
0.639
0.603
0.603
0.617
0.617
0.609
0.609
0.695
0.695
0.679
0.679
1.70
1.70
1.70
1.70
1.70
1.70
1.60
1.60
1.50
1.50
1.60
1.60
1.50
1.50
1.80
1.80
1.70
1.70
I - Moment of
Inertia
S - Section
Modulus
r - Radius of
Gyration
TECHNICAL DATA
ELEMENTS OF SECTION
RACEWAY DATA
UNISTRUT channel is listed by Underwriters
Laboratories as a surface metal raceway.
Snap-in closure strip is used to complete the
raceway. Accessory parts listed by
Underwriters are noted on drawings.
P3000, &-KO
Number & Conductor Size (AWG)
THWN, THHN
88
66
42
20
14
THWN, THHN
72
54
34
17
12
XHHW
58
46
35
16
12
XHHW
48
37
29
13
10
T, TW
57
44
34
16
T, TW
46
36
28
13
THW
37
30
24
12
THW
30
25
20
10
RH
33
27
16
RH
27
22
13
RHH, RHW
23
20
16
RHH, RHW
19
16
13
P5000, &-KO
P5500, &-KO
THWN, THHN
40
30
19
THWN, THHN
193 144
91
45
32
THWN, THHN
141 105
66
33
XHHW
26
21
16
XHHW
128 101
78
37
27
XHHW
93
73
57
27
19
T, TW
26
20
15
T, TW
125
98
75
35
20
T, TW
91
58
55
26
15
15
23
THW
17
14
11
THW
81
67
54
28
20
THW
59
49
39
20
RH
15
12
RH
73
60
36
19
13
RH
53
44
26
14
10
RHH, RHW
10
RHH, RHW
51
44
36
19
13
RHH, RHW
37
32
26
14
10
14
12
10
8
6
P1000, P1100,
P1000-KO P1100-KO
A
B
6
6
5
4
2
10
10
8
6
3
P3000
P3000-KO
A
B
P5000
P5000-KO
A
B
5
4
4
3
2
4
3
6
6
10
10
8
6
4
10
10
6
4
2
P3300
P4000
10
10
10
9
6
P5500
P5500-KO
A
B
10
10
8
6
4
10
10
10
8
6
NOTE: Suitable for number of wires in Column A when installed to support and supply electric discharge type lighting fixtures when
raceway wiring is suitable for at least 75C except wire suitable for 60C may be used when clearance between fixtures and raceways is
at least 1/2 inch. Also suitable for number of wires in Column B when installed to support electric discharge type lighting fixtures when
raceway wiring is suitable for at least 75C and clearance between fixtures and raceway is a least 1/8 inch.
Channel
8'
Deflection Table
Distance Between Supports
10'
12'
14'
16'
18'
20'
22'
24'
P4000 .375"
P3300 .187"
P2000 .125" .312" .625"
P3000 .100" .250" .500"
P1100 .088" .250" .437" .875"
P1000
P5500
P5000
P1001
P5001
.200" .250"
.400" .500"
17
TM
TECHNICAL DATA
UNISTRUT
LOAD
FACTOR
DEFLECTION
FACTOR
1.00
1.00
.50
.80
3. Simple Beam,
Two Equal Concentrated Loads at 1/4 Pts.
1.00
1.10
1.50
.30
1.00
.40
6. Cantilever Beam,
Uniform Load
.25
2.40
7. Cantilever Beam,
Concentrated Load at End
.12
3.20
1.30
.92
1.00
.42
.62
.71
.67
.48
1. Simple Beam,
Uniform Load
SPAN
2. Simple Beam,
Concentrated Load at Center
SPAN
SPAN
EXAMPLE I
EXAMPLE II
PROBLEM:
Determine load and deflection
of a P1000 beam continuous
over one support and loaded
uniformly on one span.
PROBLEM:
Determine load and deflection
of a P5500 cantilever beam
with a concentrated load on
the end.
5' - 0"
SOLUTION:
A. From load table for P1000 on page 14
load for a 5'-0" span is 680# and deflection is .35".
B. Multiply by factors from table above.
Load = 680# x 1.30 = 884#
Deflection = .35" x .92 = .32"
18
5' - 0"
3' - 0"
SOLUTION:
A. From load table for P5500 on page 14
load for a 3'-0" span is 2190# and deflection is .09".
B. Multiply by factors from table above.
Load = 2190# x .12 = 263#
Deflection = .09" x 3.20 = .29"
GUIDE SPECIFICATION
Part One - General
1.01 Scope of work
A. Provide all Unistrut Metal Framing
material, fittings and related accessories
(Strut System) as indicated on the
Contract Drawings.
B. Provide all labor supervision, engineering,
and fabrication required for installation
of the Strut System in accordance with
the Contract Drawings and as specified
herein.
C. Related work specified elsewhere.
1.03 Submittals
A. Structural Calculations and Shop
Drawings
1. Submit structural calculations for
approval by the project engineer.
Calculations may include, but are not
limited to:
a. Description of design criteria.
b. Stress and deflection analysis.
c. Selection of Unistrut framing
members, fittings and accessories.
1.05 Guarantee
A. Separate guarantees shall be issued from
the erector and manufacturer, valid for a
period of one year, against any defects
that may arise from the installation or
manufacture of the Strut System
components.
2.02 Materials
A. All channel members shall be fabricated
from structural grade steel conforming to
one of the following ASTM specifications:
A 570 GR 33, A 653 GR33
B. All fittings shall be fabricated from steel
conforming to one of the following
ASTM specifications:
A 575, A 576, A 36 or A 635
C. Substitutions
Any substitutions of product or
manufacturer must be approved in
writing 10 days prior to bid date, by
Architect or Engineer of record.
2.03 Finishes
A. Strut System components shall be
finished in accordance with one of the
following standards:
1. PERMA-GREEN II (GR)
Rust inhibiting acrylic enamel paint
applied by electro-deposition, after
3.02 Installation
A. Installation shall be accomplished by a
fully trained manufacturer authorized
installer.
B. Set Strut System components into final
position true to line, level and plumb, in
accordance with approved shop
drawings.
C. Anchor material firmly in place. Tighten
all connections to their recommended
torques.
3.03 Cleanup
A. Upon completion of the section of work,
remove all protective wraps and debris.
Repair any damage due to installation of
this section of work.
3.04 Protection
A. During installation, it shall be the
responsibility of the installer to protect
this work from damage.
B. Upon completion of this scope of work, it
shall become the responsibility of the
general contractor to protect this work
from damage during the remainder of
construction on the project and until
substantial completion.
The specifications, descriptions, information and illustrated material herein are submitted solely for evaluation by others and since the use of its products and information
is not within its control, Unistrut assumes no obligation or liability for such information and does not guarantee results from the use of said products or the information
herein. Reference should be made to original or primary source data along with standard accepted industry practice. The material herein is as of the date of publication
and is subject to change without notice.
19
CEILING GRID
Drops for this grid are fabricated from
threaded rod suspended from Unistrut
channel, which is attached to the roof
structure with Unistrut beam clamps.
TM
PRINTED IN USA
UNISTRUT
Metal Framing
Unistrut Corporation
35660 Clinton
Wayne, MI 48184
1-800-521-7730
FAX: 1-313-721-4106
MFEB-1 897