Beruflich Dokumente
Kultur Dokumente
to start oven. Once it beeps and indicator light turns off its DONE. Afterwards, open the oven and get the fiber. (CAUTION: be careful HOT surface)
STEP 1: Using a scissor, cut the fiber into half. STEP 2: Use the marker and ruler to mark 30mm
then remove the covering using fiber stripper to bare fibers on each side and put your splice sleeve on one side.
MULTI-FIBER CONNECTORS
STEP 10: Open the oven then put the right side in
first and latch down the holder, properly place it then keep it tight.