Beruflich Dokumente
Kultur Dokumente
SIM508_AN_01_V1.01
General Notes Simcom offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Simcom. The information provided is based upon requirements specifically provided to Simcom by the customers. Simcom has not undertaken any independent search for additional relevant information, including any information that may be in the customers possession. Furthermore, system validation of this product designed by Simcom within a larger electronic system remains the responsibility of the customer or the customers system integrator. All specifications supplied herein are subject to change. Copyright This document contains proprietary technical information which is the property of SIMCOM Limited., copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time. Copyright SIMCOM Limited. 2007
SIM508_AN_01_V1.01
27.03.2007
Contents
Contents ............................................................................................................................................3 Version History.................................................................................................................................4 1 Set Push-To-Fix (PTF) Mode.........................................................................................................5 2 Set Continue Mode(Full Power Mode) ..........................................................................................8 3 Set UART protocol and Baud rate .................................................................................................9 4 CheckSum software .....................................................................................................................10
SIM508_AN_01_V1.01
27.03.2007
Version History
Date 2007-03-27 Version 01.01 Description of change Origin Author KEN
SIM508_AN_01_V1.01
27.03.2007
SIM508_AN_01_V1.01
27.03.2007
Figure 1 Example 2: A0A2000997000100C8000000C80228B0B3 A0A2000FA70000753000009C400000003C00000264B0B3 (Low Power Acquisition Parameters: Max Off Time: 00007530 //30000ms=30s Max Search Time: 00009C40 //40000ms=40s Push-to-Fix Period: 0000003C //60s) Input above commands on SIRF binary UART, GPS receiver will enter into sleep mode soon and wakeup every 60s. When the signal is too weak to fix a position in the max searching time 40s such as indoor, the GPS receiver will then enter into sleep mode for 30s.
SIM508_AN_01_V1.01
27.03.2007
Figure 2 If the time set by Max Search Time elapses and no fix is obtained, the receiver will enter into sleep mode. The sleep time depend on Max Search Time and Max Off Time Parameters which are set by Low Power Acquisition command. If Max Search Time >= Max Off Time, the sleep time when position cant fixed = Max Off Time; If Max Search Time < Max Off Time, the sleep time when position cant fixed = (Max Off Time Max Search Time). If a valid position fix is obtained in the Max Search Time, the receiver will then go to sleep, the sleep time when position is fixed = (PTF period real searching time). When the receiver reactivates, a hot start is commanded. The change of low power sets are keep into SRAM, all changes will lose if no GPS_VRTC supplied
SIM508_AN_01_V1.01
27.03.2007
SIM508_AN_01_V1.01
27.03.2007
SIM508_AN_01_V1.01
27.03.2007
4 CheckSum software
Checksum software can be used to compute the SIRF and NEMA command checksum. Run checksum.exe and select NEMA radio button, in data domain, type the NEMA message in turn: start region, data sequence region. Click Compute button, then the checksum will be generated automatically.
$PSRF100, 0,57600,8,1,0
For example, type $PSRF100,0,57600,8,1,0 and click the Compute button, the whole command will be $PSRF100,0,57600,8,1,0*37 Open the checksum command and select SIRF radio button, in data domain, type the SIRF message in turn: start sequence region, payload length region and payload region. Click the Compute button, then the checksum will be generated automatically.
For example type A0A2000997000003E8000000C8 and click Compute button, the whole command will be A0A2000997000003E8000000C8024AB0B3
SIM508_AN_01_V1.01 10 27.03.2007
Contact us: Shanghai SIMCom Ltd. Add: SIM Technology Building, No. 700, Yishan Road, Shanghai,P. R. China 200233 Tel: +86 21 5427 8900 Fax: +86 21 5427 6035 URL: www.sim.com