Beruflich Dokumente
Kultur Dokumente
PEDROLLO S.p.A. Via Enrico Fermi 7 - P.O. BOX 58 37047 San Bonifacio (Verona) ITALY paid-up capital 30.000.000 Tel. +39 045 6136311 Fax +39 045 7614663 e-mail: sales@pedrollo.com www.pedrollo.com
Pedrollos aim is to move water all over the world, with creativeness and passion. Our pumps are suitable for all purposes, easy to use, ecological, accessible to everyone, everywhere. Our mission is to make water available everywhere, supporting life, development and comfort.
Organized on an area of 70,000 m2 our company makes use of a production process characterised by a high level of technology and automation, putting it at the top of its sector both for the amount of investments and for the ability to ensure quality throughout the production process. Pedrollo pumps are distributed in 160 countries, thus allowing our company to assume an international role that results in a yearly production of close to 2,000,000 units. The range comprises more than 60 families of pumps (drainage pumps, submerged and surface pumps) covering the majority of applications in the domestic, civil, agricultural and industrial sectors.
A highly advanced research and development centre, endowed with the most sophisticated work tools, both hardware and software, allows the continuous updating of the existing range as well as the planning of new products using materials of the latest generation.
The heart of the pump is certainly the electric motor. It is therefore necessary to guarantee not only the best quality of the components used, but also that the execution of the various passages of the winding (insulation, coils, impregnation, etc.) is carried out using the most advanced automatic machines, to guarantee the precision and constancy of the various steps.
Before obtaining approval for the production phase, a technologically advanced test room, equipped with the latest test benches, allows strict electrical and hydraulic testing to ensure the quality and effectiveness of the design phase.
The final assembly of our pumps is carried out on automatic lines which guarantee maximum precision in the assembly phase and a high speed of execution, to ensure that the finished product is available in a short time.
PERIPHERAL
PK PQ PQ 3000 PQA PV
page 16
VERTICAL
BRONZE
PK PQ CP
page 101 page 102 page 103
VL
page 20
page 118
page 22
VLE
page 122
SUBMERGED
4SK
page 108 page 110
page 24
5SK
page 26
STAINLESS STEEL
AL-RED
page 30
4BLOCK
page 126
CENTRIFUGAL
CP
page 28 page 32
PRO-NGA
SUMO
page 48
page 114
page 130
6SR JCR
page 72
page 144
HF
page 40
SELF-PRIMING
NF
page 44
PKS
page 18
SUBMERSIBLE
NGA
page 46
JSW
page 62
TOP
page 156
JDW
page 68
MULTI-STAGE
2CP CK RX
page 78 page 162
page 50
3-4CP
page 58
CKR
page 80
ZD
page 166
MC
page 188
ZX
page 168
PVXC
page 190
page 170
PMC
page 192
VX
page 172
PORTABLE
BETTY
page 104
HYDROFRESH
VX-I
page 176 page 196
MC-I
page 178
COMBIPRESS
DC
page 180 page 201213
VXC
page 182
MOTORS
MC
page 184
VXC
page 186
ACCESSORIES
page 220
RANGE OF PERFORMANCE Flow rate up to 90 l/min (5.4 m3/h) Head up to 100 m LIMITS OF USE Manometric suction lift up to 8 m Liquid temperature up to + 60C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron, with threaded ports ISO 228/1. MOTOR BRACKET (patent n 1289150): aluminium with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity. IMPELLER: brass, of the type with radial peripheral vanes. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. PKm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. PK: three-phase 230/400 V- 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL n 72753. PKm 60 is a REGISTERED TRADE MARK n 602636.
OPTIONS ON REQUEST
16
PK300
PK80 PK70
Head H (metres)
PK65
PK60
Flow rate Q
TYPE
Single-phase PKm 60 PKm 65 PKm 70 PKm 80 PKm 90 PKm 100 PKm 200 Three-phase PK 60 PK 65 PK 70 PK 80 PK 90 PK 100 PK 200 PK 300
POWER
kW HP
m3/h l/min
0 0
0.3 5 38 50 62 66 82 80 86 95
0.9 15 29 40.5 52 56 60 70 76 85
1.2 20 24 36 47 51 49 65 71 80
1.8 30 15 27 37 41 27 55 60 70
2.1 35 10 22 32 36.5 17 50 55 65
2.4 40 5 17 27 31 5 45 50 60
3.0 50 8 18 22 35 40 50
3.6 60
4.2 70
4.8 80
5.4 90
25 30 40
15 20 30
10 20
10
h2
DN1
h3
h1
n1 n
TYPE Single-phase Three-phase PKm 60 PK 60 PKm 65 PK 65 PKm 70 PK 70 PKm 80 PK 80 PKm 90 PK 90 PKm 100 PK 100 PKm 200 PK 200 PK 300
PORTS
DN1 DN2
a 42 48 55 55 55 58 55 55 55
f 243 258/250 285 285 285 288 322 348 342/322 342
h1 63 63 63 71 71 71 80 80 80
h2 75 80 85 85 85 95 94 94 94 94
DIMENSIONS mm h3 i m 138 20 80 80 143 20 80 156 20 90 156 156 20 90 20 166 20 90 174 20 100 174 174 20 100 174 20 100
kg n 120 120 120 138 138 138 158 158 158 n1 100 100 100 112 112 112 112 125 125 125 125 w 55 55 55 62 62 62 85 85 95 95 s 7 7 7 7 7 7 9 9 9 1~ 5.3 7.7 10.1 10.3 10.3 10.3 15.0 16.0 3~ 5.3 6.4 9.2 9.9 9.3 13.1 15.2 18.0
17
RANGE OF PERFORMANCE Flow rate up to 50 l/min (3 m3/h) Head up to 70 m LIMITS OF USE Manometric suction lift up to 9 m Liquid temperature up to + 60C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR COMPACTNESS, RELIABILITY AND ECONOMY THEY ARE SUITABLE FOR DOMESTIC USE AND IN PARTICULAR FOR DISTRIBUTING WATER IN COMBINATION WITH SMALL PRESSURE SETS, FOR IRRIGATING GARDENS, DRAWING WATER FROM TANKS OR WELLS DOWN TO A DEPTH OF 9 METRES AND IN ALL CASES WHERE THERE IS THE PRESENCE OF AIR OR GAS IN THE LIQUID TO BE PUMPED; the pump is provided with a check flap valve on the intake so that it is no longer necessary to fit a foot valve. The pumps must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: cast iron, with threaded ports ISO 228/1. CHECK FLAP VALVE: incorporated in the suction port. MOTOR BRACKET (patent n 1289150): aluminium with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity. IMPELLER: brass, of the type with radial peripheral vanes. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. PKSm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. PKS: three-phase 230/400 V- 50 Hz INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL n 72753.
OPTIONS ON REQUEST
18
PKS80 PKS70
PKS65
Head H (metres)
PKS60
Flow rate Q
TYPE
Single-phase PKSm 60 PKSm 65 PKSm 70 PKSm 80 Three-phase PKS 60 PKS 65 PKS 70 PKS 80
POWER
kW HP
m3/h l/min
0 0 40 55 65 70
0.3 5 38 50 62 66
0.9 15 29 40.5 52 56
1.2 20 24 36 47 51
1.5 25 19.5 31 42 46
1.8 30 15 27 37 41
2.1 35 10 22 32 36.5
2.4 40 5 17 27 31
2.7 45 12.5 22 27
3.0 50 8 18 22
n f
DN2
k i
h2
DN1
h1
n1
TYPE Single-phase Three-phase PKSm 60 PKS 60 PKSm 65 PKS 65 PKSm 70 PKS 70 PKSm 80 PKS 80
PORTS
DN1 DN2
a f h 29 230 192 192 29 29 238/230 192 29 260 200 200 29 260 200
h2 34 34 34 34 34
DIMENSIONS h3 i 190 110 190 190 110 110 198 110 198 198 110
mm m 80 80 80 90 90 90
h3
kg n 150 150 150 160 160 160 k 120 120 120 138 138 138 n1 100 100 100 112 112 112 w 55 55 55 62 62 62 s 7 7 7 7 7 1~ 6.1 7.7 10.7 10.8 3~ 6.1 7.1 9.6 9.7
19
RANGE OF PERFORMANCE Flow rate up to 90 l/min (5.4 m3/h) Head up to 100 m LIMITS OF USE Manometric suction lift up to 8 m Liquid temperature up to + 90C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. THE HYDRAULIC CHARACTERISTICS OF THESE PUMPS, TOGETHER WITH THEIR COMPACTNESS, MAKE THEM SUITABLE FOR USE IN THE INDUSTRIAL SECTOR. The pumps must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: cast iron, with threaded ports ISO 228/1. PUMP BODY: brass for PQ 81-Bs MOTOR BRACKET (patent n 1289150): aluminium with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity. IMPELLER: brass, of the type with radial peripheral vanes. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. PQm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. PQ: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL n 72753
OPTIONS ON REQUEST
pump shaft in stainless steel EN 10088-3 - 1.4401 (AISI 316) special mechanical seal protection IP 55 other voltages or frequency 60 Hz
20
PQ300
PQ200 PQ100
PQ80 PQ70
Head H (metres)
PQ65
PQ60
PQ81-81Bs PQ90
Flow rate Q
TYPE
Single-phase PQm 60 PQm 65 PQm 70 PQm 80 PQm 90 PQm 100 PQm 200 Three-phase PQ 60 PQ 65 PQ 70 PQ 80 PQ 90 PQ 100 PQ 200 PQ 300
POWER
kW HP
m3/h l/min
0 0
0.3 5 38 50 62 66 82 80 86 95
1.2 20 24 36 47 51 49 65 71 80
1.8 30 15 27 37 41 27 55 60 70 0.48 8 54 54
2.4 40 5 17 27 31 5 45 50 60
3.0 50 8 18 22 35 40 50 0.72 12 37 37
3.6 60
4.2 70
4.8 80
5.4 90
25 30 40 0.84 14 28 28
15 20 30 0.96 16 19 19
10 20
10 1.08 18 10 10
TYPE
Single-phase PQm 81 PQm 81-Bs Three-phase PQ 81 PQ 81-Bs
POWER
kW HP Q
0 0 90 90
0.36 6 63 63
l/min
0.50 0.50
h2
DN1
h3
h1
n1 n
TYPE Single-phase Three-phase PQm 60 PQ 60 PQm 65 PQ 65 PQm 70 PQ 70 PQm 80 PQ 80 PQm 81 PQ 81 PQm 81-Bs PQ 81-Bs PQm 90 PQ 90 PQm 100 PQ 100 PQm 200 PQ 200 PQ 300
PORTS
DN1 DN2
1" 1" 1" 1" 1" 1/2" 1/2" 1/2" 3/4" 1" 1" 1" 1"
1" 1" 1" 1" 1" 1/2" 1/2" 1/2" 3/4" 1" 1" 1" 1"
a 22 22 22 22 22 18 18 18 22 25 25 25 25
f 223 234/227 253 253 253 227/220 227/220 227/220 253 292 312/292 318 312
h 152 152 152 179 179 179 152 152 152 179 203 203 212 203
h1 108 113 121 121 121 118 118 118 126 140 140 140 140
h2 30 30 30 30 30 23 23 23 27 30 30 30 30
DIMENSIONS mm h3 i m 138 78 80 78 80 143 78 80 151 83 90 151 83 90 151 83 90 141 71 80 141 71 80 141 71 80 153 84 90 170 89 100 170 89 100 170 100 170 89 100
kg n 120 120 120 138 138 138 120 120 120 138 158 158 158 158 n1 100 100 100 112 112 112 100 100 100 112 125 125 125 w 55 57 62 62 62 58 58 58 62 85 85 85 85 s 7 7 7 7 7 7 7 7 9 9 9 9 1~ 5.3 7.1 9.9 10.0 6.7 6.8 10.0 14.8 15.7 3~ 5.3 6.3 8.9 8.8 6.8 6.8 9.0 14.3 14.8 15.7
21
RANGE OF PERFORMANCE Flow rate up to 50 l/min (3 m3/h) Head up to 180 m LIMITS OF USE Manometric suction lift up to 8 m Liquid temperature up to + 90C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
It is recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. THE HYDRAULIC CHARACTERISTICS OF THIS PUMP, TOGETHER WITH ITS COMPACTNESS AND STURDINESS, MAKE IT SUITABLE FOR USE IN THE INDUSTRIAL SECTOR. The pump must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: cast iron, with threaded ports ISO 228/1. BODY BACK-PLATE: brass with front shim disk in stainless steel. MOTOR BRACKET (patent n 1289150): aluminium with brass and stainless steel insert; eliminates seizure of the impeller after long periods of inactivity. IMPELLER: bronze, of the type with radial peripheral vanes. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. PQ 3000: three-phase 230/400 V - 50 Hz. INSULATION: class H. PROTECTION: IP 55.
OPTIONS ON REQUEST
pump shaft in stainless steel EN 10088-3 - 1.4401 (AISI 316) special mechanical seal other voltages or frequency 60 Hz
22
PQ3000
Head H (metres)
Flow rate Q
TYPE
Three-phase PQ 3000
POWER
kW HP Q
m3/h l/min
0 0 180
0.6 10 160
0.9 15 145
1.2 20 132
1.5 25 118
1.8 30 105
2.1 35 92
2.4 40 78
2.7 45 63.5
3.0 50 50
2.2
H metres
f
DN2
h2
DN1
h3
s a w m n1 n
TYPE Three-phase
PORTS
DN1 DN2
h1
kg 3~ 19.0
PQ 3000
3/4"
3/4"
23
RANGE OF PERFORMANCE Flow rate up to 50 l/min (3 m3/h) Head up to 90 m LIMITS OF USE Manometric suction lift up to 8 m Liquid temperature up to + 90C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. NON-FERROUS CONSTRUCTION WITH WETTED PARTS IN HIGH PERFORMANCE TECHNOPOLYMER AND BRASS TO ELIMINATE THE POSSIBILITY OF CORROSION. CONSEQUENTLY THEY ARE RECOMMENDED FOR INDUSTRIAL APPLICATIONS INCLUDING COOLING, CONDITIONING AND BOILER FEED. The pumps must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: high-performance technopolymer with metal threaded port insert ISO 228-1 for secure pipe connection without damage to the pump body. BODY BACK-PLATE: brass . MOTOR BRACKET (patent n 1289150): aluminium with brass insert; eliminates seizure of the impeller after long periods of inactivity. IMPELLER: brass, of the type with radial peripheral vanes. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. PQAm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. PQA: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL
OPTIONS ON REQUEST
pump shaft in stainless steel EN 10088-3 - 1.4401 (AISI 316) special mechanical seal protection IP 55 other voltages or frequency 60 Hz
24
PQA90
Head H (metres)
PQA60
Flow rate Q
TYPE
Single-phase PQAm 60 PQAm 70 PQAm 72 PQAm 80 PQAm 82 PQAm 90 Three-phase PQA 60 PQA 70 PQA 72 PQA 80 PQA 82 PQA 90
POWER
kW HP
m3/h l/min
0 0 40 65 65 70 70 90
0.1 2 38 62 66 86
0.3 5 35 58 62 62 66 79
0.6 10 29 52 57 56 61 68
1.5 25 12.5 33 42 37 46 34
3.0 50
18 22
f
DN2
h2
DN1
h3
h1
s a w m
n1 n
TYPE Single-phase Three-phase PQAm 60 PQA 60 PQAm 70 PQA 70 PQAm 72 PQA 72 PQAm 80 PQA 80 PQAm 82 PQA 82 PQAm 90 PQA 90
PORTS
DN1 DN2
a 25 28 28 28 28 28 27
DIMENSIONS mm h2 h3 i 33 136 72.5 72.5 32.5 149 72.5 30 151 83 32.5 149 72.5 30 151 83 35 156 76
kg m 80 90 90 90 90 90 n 120 138 138 138 138 138 138 n1 100 112 112 112 112 112 112 w 55 62 62 62 62 62 s 7 7 7 7 7 7 7 1~ 4.8 10.3 10.4 10.5 10.5 10.4 10.4 3~ 4.8 9.3 9.4 9.5 9.5 9.4 9.4
25
RANGE OF PERFORMANCE Flow rate up to 10 l/min (0.6 m3/h) Head up to 42 m LIMITS OF USE Manometric suction lift up to 8 m Liquid temperature up to + 90C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. THE CONSTRUCTION OF THIS PARTICULARLY COMPACT BRASS PUMP ELIMINATES THE POSSIBILITY OF RUST AND CORROSION. THIS MAKES IT SUITABLE FOR TRANSFERRING LIQUIDS IN THE MECHANICAL PROCESSING SECTOR, FOR CONTROLLING THE TEMPERATURE OF MOULDS, COOLING, CONDITIONING AND FOR BEVERAGE DISPENSING MACHINES. The pump must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: brass, with threaded ports ISO 228/1. MOTOR BRACKET (patent n 1289150): aluminium with brass insert; eliminates seizure of the impeller after long periods of inactivity. IMPELLER: brass, of the type with radial peripheral vanes. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - EPDM. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. PVm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. PV: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL
OPTIONS ON REQUEST
pump shaft in stainless steel EN 10088-3 - 1.4401 (AISI 316) special mechanikcal seal pump body rotated 90 in anti-clockwise direction protection IP 55 other voltages or frequency 60 Hz
26
120 35
PV55
30
100
25
80
Head H (metres)
20 60
15 40
10
20 5
0
0
1
0.1
3
0.2
5
0.3
6
0.4
8
0.5
10
0.6
Flow rate Q
TYPE
Single-phase PVm 55 Three-phase PV 55
POWER
kW HP
m3/h l/min
0 0 42
0.12 2 35
0.18 3 31
0.24 4 28
0.30 5 25
0.36 6 21.5
0.42 7 18
0.48 8 14.5
0.54 9 11
0.60 10 8
0.18
0.25 Hmetres
i f
DN1 DN2
h2
h3
s a w m
h1
n1 n
PORTS
DN1 DN2
kg 3~ 4.1
PVm 55
PV 55
1/4"
1/4"
27
centrifugal pumps
RANGE OF PERFORMANCE Flow rate up to 160 l/min (9.6 m3/h) Head up to 58 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 90C Liquid temperature up to + 40C in the CPX version (with technopolymer impeller) Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMESTIC AND CIVIL SECTOR, IN PARTICULAR FOR WATEER DISTRIBUTION IN COMBINATION WITH SMALL OR MEDIUM PRESSURE SETS, FOR TRANSFER IN GENERAL, FOR IRRIGATING GARDENS. The pumps must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: cast iron, with threaded ports ISO 228/1. BODY BACK-PLATE: stainless steel AISI 304 or cast iron on higher powered models. BRASS IMPELLER: CP 100-CP 132-CP 152-CP 150-CP 170-CP 190-CP 200 STAINLESS STEEL IMPELLER: CP 130-CP 158 MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. CPm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector built into the winding. CP: three-phase230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL n 72753.
OPTIONS ON REQUEST
impeller in technopolymer (CPm...X - CP...X) special mechanical seal other voltages or frequency 60 Hz
28
CP200
CP190
Head H (metres)
CP130
CP132A CP132B
CP100
Flow rate Q
TYPE
Single-phase CPm 100 CPm 130 CPm 132B CPm 132A CPm 152 CPm 150 CPm 158 CPm 170 CPm 170M CPm 190 Three-phase CP 100 CP 130 CP 132B CP 132A CP 152 CP 150 CP 158 CP 170 CP 170M CP 190 CP 200
POWER
kW HP
m3/h l/min
0 0 16 23 20 23 33 29.5 36 41 36 50 58
0.6 10 15 22 32 34
1.2 20 14 21 18 22 31 29 33.5
3.0
3.6
4.2
4.8
5.4 90
6.0
6.6
7.2
7.8
8.4 140
9.0
9.6
0.25 0.37 0.45 0.60 0.55 0.75 0.75 1.1 1.1 1.5 2.2
50 60 70 80 9 7 18 17 15.5 14 15 13.5 12 10.5 20 19 18 17 27 25 23 19 27.5 26.5 26 24.5 31.5 30 28.5 27 36 35 33.5 32 33.5 33 32 31 43 41.5 40 38 53.5 52 51 49.5
100 110
120 130
150 160
9 16 23 25 30 30 36 48
7 14 21
12 18
9 15
21 36
19
h2
DN1
w TYPE Single-phase Three-phase CPm 100 CP 100 CPm 130 CP 130 CPm 132B CP 132B CPm 132A CP 132A CPm 152 CP 152 CPm 150 CP 150 CPm 158 CP 158 CPm 170-170M CP 170-170M CPm 190 CP 190 CP 200 PORTS
DN1 DN2
n1 DIMENSIONS mm h1 h2 n 77 110 148 82 123 165 123 165 82 123 165 82 123 165 92 148 190 92 148 190 92 148 190 110 150 206 115 175 242 242 115 175 115 175 242
s kg n1 118 135 135 135 135 160 160 160 165 206 206 206 w 45 41 41 41 38 38 38 44.5 32.5 32.5 32.5 s 10 10 10 10 10 10 10 10 11 11 11 1~ 6.8 7.8 8.0 8.4 11.5 12.5 12.1 19.2 25.0 3~ 6.9 7.6 7.5 8.1 11.5 11.3 11.6 18.5 24.2 25.5
1" 1" 1" 1" 1" 1" 1" 1" 11/4" 11/4" 11/4" 11/4"
1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1"
a 34 42 42 42 42 42 42 42 51 51 51.5
f 247 259 259 259 266/259 285 285 285 367 338 364 338
h 187 205 205 205 240 240 240 260 290 290 290
h1
29
RANGE OF PERFORMANCE Maximum flow rate 160 l/min (9.6 m3/h) Maximum head 23 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 90C Environment temperature up to + 55C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: stainless steel AISI 304, with threaded ports ISO 228/1. BODY BACK-PLATE AND DIFFUSER: AISI 304. IMPELLER: stainless steel AISI 304, of the type with centrifugal radial flow. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. AL-RED 135m: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. AL-RED 135: three-phase 230/400 V - 50 Hz. INSULATION : class F. PROTECTION: IP 44. REGISTERED MODEL n 72753. AL-RED is a REGISTERED TRADE MARK
OPTIONS ON REQUEST
version in stainless steel EN 10088-3 - 1.4401 (AISI 316) special mechanical seal other voltages or frequency 60 Hz
30
30
25
80
AL-RED135
70
51 54
20
Head H (metres)
60
15
=56%
50
40
53
10
30
20
5
10
0
0 1
25
2
50
3 4
75
5
100
Flow rate Q
1.2 20 21 2.4 40 20.5
6 7
125
8
150
9 10
175
11
l/min
m3/h
TYPE
Single-phase Three-phase AL-RED 135m AL-RED 135
POWER
kW HP
m3/h l/min
0 0 23
3.6 60 20
4.8 80 18.5
6.0 100 17
7.2 120 15
8.4 140 13
9.6 160 10
0.75
H metres
f a
DN2
DN1
h2
s w n1 TYPE Single-phase Three-phase PORTS
DN1 DN2
h1
h3
kg 3~ 9.1
11/4"
1"
31
Electric pumps with high efficiency motor for reduced energy consumption
RANGE OF PERFORMANCE Flow rate up to 900 l/min (54 m3/h) Head up to 75 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 90C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron, with threaded ports ISO 228/1. BODY BACK-PLATE: cast iron. IMPELLER: brass for pumps CP 220, CP 230. IMPELLER: cast iron for pumps CP 250. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, with high efficiency (class EFF1), quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. CP: three-phase 230/400 V - 50 Hz up to4 kW. 400/690 V - 50 Hz from 5.5 to 11 kW. INSULATION: class F. PROTECTION IP 44. REGISTERED MODEL n 72753 PATENTED ELECTRIC MOTOR
OPTIONS ON REQUEST
pump shaft in stainless steel EN 10088-3 - 1.4401 (AISI 316) special mechanical seal protection IP 55 other voltages or frequency 60 Hz
32
Head H (metres)
Flow rate Q
33
CP220AH CP220A
50 54 56 57 58
=60%
Head H (metres)
CP220C
NPSH (metres)
AH A B C
Flow rate Q
TYPE
Single-phase Three-phase
POWER
kW HP
m3/h l/min
0 0 32 38 49 52
6 100 31 37 48 51
12 200 30 36 46 49
24 400 24 29 39.5 44
27 450 21 25 36 42
2.2 3 4 5.5
3 4 5.5 7.5
H metres
34
P2 (HP)
NPSH (feet)
H (feet)
CP220B
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Single-phase Three-phase
POWER
kW HP
m3/h l/min
0 0 30 39 46
18 300 27 36 42
24 400 25 34 40
30 500 22 31 37
51 850 9 15 18
54 900 13 15
3 4 5.5
4 5.5 7.5
H metres
P2 (HP)
NPSH (feet)
H (feet)
35
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Three-phase CP 250C CP 250B CP 250A CP 250CR CP 250BR CP 250AR
POWER
kW HP
m3/h l/min
0 0 57 66 74 57 66 74
6 100 56 65 73 56 65 73
30 500 46 53 61 46 53 61
54 900 24 30 37 24 30 37
36
P2 (HP)
NPSH (feet)
H (feet)
h2
DN1
s w n1 n2
TYPE Single-phase
CPm 220C CPm 220B CPm 230C
PORTS
DN1 DN2
DIMENSIONS mm a
70 70 70 70 70 70 70 65 65 65 92 92 92
h1
kg n1
170 190 190 190 190 190 190 230 230 230 230 230 230 230
Three-phase
CP 220C CP 220B CP 220A CP 220AH CP 230C CP 230B CP 230A CP 250C CP 250B CP 250A CP 250CR CP 250BR CP 250AR
f
421/402 459 505 459 505 507 571 571 571 534 598 598 598
h
315 328 328 328 328 328 328 392 392 392 392 392 392 392
h1
132 136 136 136 136 136 136 160 160 160 160 160 160 160
h2
183 192 192 192 192 192 192 232 232 232 232 232 232 232
n
255 273 273 273 273 273 273 322 322 322 322 322 322 322
n2
230 250 250 250 250 250 250 294 294 294 294 294 294 294
w
40 40 40 40 40 40 40 40 45 45 45 45 45 45 45
s
14 14 14 14 14 14 14 14 14 14 14 14 14 14
3~ 30.5 33.3 41.0 47.6 33.0 41.3 47.6 74.0 96.0 103.0 78.0 100.0 107.0
2"
2" 2" 2" 2" 2" 2" 2" 2" 2" 4" 4" 4" 4"
2"
2" 2" 2" 2" 2" 2" 2" 2" 2" 3" 3" 3" 3"
2"
2"
37
RANGE OF PERFORMANCE Flow rate up to 250 l/min (15 m3/h) Head up to 57 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 90C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. THE PUMPS IN THIS SERIES ARE MADE TO STANDARDS EN 733 - DIN 24255 AND ARE SPECIFICALLY USED IN THE CIVIL, INDUSTRIAL OR AGRICULTURAL SECTORS WHERE THEIR CHARACTERISTICS OF STURDINESS AND RELIABILITY CAN BE BEST APPRECIATED. The pumps must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: cast iron, made to standards EN 733 - DIN 24255 and UNI 7467- NF E-44-111, with threaded ports ISO 228/1. IMPELLER: brass, of the type with centrifugal radial flow. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. CPm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector up to 1.5 kW. CP: three-phase 230/400 V - 50 Hz. INSULATION : class F. PROTECTION: IP 44.
OPTIONS ON REQUEST
38
CP25/200A
42 45
CP25/200B
47
Head H (metres)
=49%
CP25/160AR CP25/160A CP25/160B
50 47 53 45
=56%
53 50
42
Flow rate Q
TYPE
Single-phase CPm 25/160B CPm 25/160A CPm 25/200B Three-phase CP 25/160B CP 25/160A CP 25/160AR CP 25/200B CP 25/200A
POWER
kW HP
m3/h l/min
0 0 33 38 42 49 57
3.0 50 32.5 37 41 48 56
4.8 80 31 36 40 46.5 55
6.6 110 29 34 38 44 53
7.5 125 28 33 37 43 52
13.2 220 20 24 28 40
15.0 250
1.5 2 3 3 4
H metres
22 33
f a
DN2
h2
DN1
w1
w2
n1
TYPE Single-phase Three-phase CPm 25/160B CP 25/160B CPm 25/160A CP 25/160A CP 25/160AR CPm 25/200B CP 25/200B CP 25/200A
PORTS
DN1 DN2
a 56 56 56 56 60 60 60
DIMENSIONS mm h2 n 155 206 206 155 155 206 180 252 252 180 180 252
h1
kg n1 150 150 150 210 210 210 w1 27.5 27.5 27.5 23.5 23.5 23.5 w2 27.5 27.5 27.5 39.5 39.5 39.5 s 10 10 10 10 11 11 11 1~ 20.7 21.7 31.0 3~ 18.7 21.0 21.8 28.6 30.7
39
centrifugal pumps
medium flow rates
RANGE OF PERFORMANCE Flow rate up to 600 l/min (36 m3/h) Heads up to 39 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 90C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
THE HF SERIES IS RECOMMENDED FOR CIVIL, AGRICULTURAL AND INDUSTRIAL APPLICATIONS. THE HIGH FLOW RATES AND CONTINUOUS RATING MAKE IT IDEAL FOR IRRIGATION WITH FLOWING AND SPRINKLING WATER, FOR DRAWING WATER FROM LAKES, RIVERS, WELLS, OR FOR INDUSTRIAL APPLICATIONS THAT NEED TO ACHIEVE LARGE FLOW RATES AT MEDIUM-LOW HEADS. The pumps must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: cast iron, with threaded ports ISO 228/1. IMPELLER: brass, of the type with centrifugal radial flow. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. HFm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. HF: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44.
OPTIONS ON REQUEST
40
HF70A
HF70B
HF60
Head H (metres)
HF50A HF50B
Flow rate Q
TYPE
Single-phase HFm 50B HFm 50A HFm 51B HFm 51A HFm 60 HFm 70B HFm 5C HFm 5B HFm 5A HFm 5BM HFm 5AM Three-phase HF 50B HF 50A HF 51B HF 51A HF 60 HF 70B HF 70A HF 5C HF 5B HF 5A HF 5BM HF 5AM
POWER
kW HP
m3/h l/min
21 350
24 400
30 500
36 600
0.37 0.55 0.60 0.75 1.1 1.5 2.2 0.60 0.75 1.1 1.1 1.5
5 6.5 7.5 10
h2
DN1
w TYPE Single-phase HFm 50B HFm 50A HFm 51B HFm 51A HFm 60 HFm 70B HFm 5C HFm 5B HFm 5A HFm 5BM HFm 5AM PORTS Three-phase HF 50B HF 50A HF 51B HF 51A HF 60 HF 70B HF 70A HF 5C HF 5B HF 5A HF 5BM HF 5AM
DN1 DN2
n1 DIMENSIONS mm h1 h2 n 82 118 165 82 118 165 82 118 165 92 133 190 92 133 190 92 133 190 114 155 216 114 155 216 114 155 216 114 155 216 97 141 196 97 141 196 97 141 196 97 141 196 110 150 206 110 150 206 110 150 206
s kg n1 135 135 135 160 160 160 171 171 171 171 160 160 160 160 160 160 w 1 1 1 4 4 4 12 12 12 14 14 14 14 1 1 1 s 10 10 10 10 10 12 12 12 11 11 11 11 11 1~ 8.3 8.9 15.5 13.0 20.0 22.2 15.3 15.1 15.5 20.3 22.2 3~ 8.2 8.4 15.1 12.1 19.3 21.6 22.8 14.2 14.3 15.2 19.5 21.8
11/2" 11/2" 11/2" 11/2"" 1/2 11/2" 11/2" 11/2" 2" 2" 2" 2" 2" 2"
11/2" 11/2" 11/2" 11/2"" 1/2 11/2" 11/2" 11/2" 2" 2" 2" 2" 2" 2"
f 276 283/276 300 300 300 347 373 367 332 332 332 360 386 380/360
h 200 200 200 225 225 225 269 269 269 238 238 238 260 260 260
h1
41
centrifugal pumps
high flow rates
RANGE OF PERFORMANCE Flow rate up to 1800 l/min (108 m3/h) Head up to 24.5 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 90C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
THE HF SERIES IS RECOMMENDED FOR USE IN THE CIVIL, AGRICULTURAL AND INDUSTRIAL FIELD. THE HIGH FLOW RATES AND CONTINUOUS RATING MAKE IT IDEAL FOR IRRIGATION WITH FLOWING AND SPRINKLING WATER, FOR DRAWING WATER FROM LAKES, RIVERS, WELLS, OR FOR INDUSTRIAL APPLICATIONS THAT NEED TO ACHIEVE LARGE FLOW RATES AT MEDIUM-LOW HEADS. The pumps must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: cast iron, with threaded ports ISO 228/1. IMPELLER: brass, of the type with centrifugal radial flow. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.. HFm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. HF: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44.
OPTIONS ON REQUEST
42
HF6A-6AR
HF20A HF30B
Head H (metres)
HF20B HF6B-6BR
HF6C-6CR
HF4
100
Flow rate Q
TYPE
Single-phase HFm 4 HFm 6C HFm 6B HFm 6CR HFm 6BR HFm 8B HFm 20B Three-phase HF 4 HF 6C HF 6B HF 6A HF 6CR HF 6BR HF 6AR HF 8B HF 8A HF 20B HF 20A HF 30B HF 30A
POWER
kW HP Q
m3/h l/min
30 500 7 10.2 12.8 16.8 10.2 12.8 16.8 19.5 22.5 15.4 18.4 -
54
60
66
72
84
96
900 1000 1100 1200 1400 1600 1700 1800 2000 2200 5 8.2 12.2 5 8.2 12.2 15 18.3 14.5 17.5 18 23 3 6.7 10.5 3 6.7 10.5 13.5 16.8 14 17 18 23
5 8.3
5 8.3 6 11.2 9 15 13 13 12 9 4.8 2 16.2 15.2 12 7.8 5 2 17.5 17 16.5 15.5 15 14.5 13 22.5 22.5 22.5 22 21.5 21 19.5
18
h2
DN1
w TYPE Single-phase Three-phase HFm 4 HF 4 HFm 6C HF 6C HFm 6B HF 6B HF 6A HFm 6CR HF 6CR HFm 6BR HF 6BR HF 6AR HFm 6B HF 8B HF 8A HFm 20B HF 20B HF 20A HF 30B HF 30A PORTS
DN1 DN2
n1 a 55 68 68 68 68 70 70 70 70 80 80 80 80 80 82 82 82 f 323 385 405/385 411 405 387 407/387 413 407 462/429 462 462/429 462 585 585 585 h 240 312 312 312 312 312 312 312 312 312 312 312 370 370 370 DIMENSIONS mm h1 h2 n 97 143 190 120 192 240 120 192 240 120 192 240 120 192 240 120 192 240 120 192 240 120 192 240 132 180 245 132 180 245 132 180 245 132 180 245 132 180 245 160 210 292 160 210 292 160 210 292
s kg n1 155 190 190 190 190 190 190 190 190 190 190 190 212 212 212 w 0 6 6 6 6 6 6 6 30 30 30 30 30 30 30 s 10 12 12 12 12 12 12 12 14 14 14 14 14 14 14 1~ 15.6 28.1 29.1 29.7 32.0 41.0 40.5 3~ 14.2 26.2 28.5 29.4 29.2 31.4 32.3 36.1 41.0 35.3 40.5 60.9 65.2
21/2" 3" 3" 3" 3" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4"
21/2" 3" 3" 3" 3" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4"
h1
43
RANGE OF PERFORMANCE Flow rate up to 1200 l/min (72 m3/h) Head up to 22.5 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 90C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
THE NF SERIES, FROM THE POINT OF VIEW OF BOTH PERFORMANCE AND MECHANICAL DIMENSIONS, HAS BEEN EXPRESSLY DESIGNED FOR USE IN THE CIVIL, AGRICULTURAL AND INDUSTRIAL FIELD. THE HIGH FLOW RATES AND CONTINUOUS RATING MAKE IT IDEAL FOR IRRIGATION WITH FLOWING AND SPRINKLING WATER, FOR DRAWING WATER FROM LAKES, RIVERS, WELLS, AND FOR TRANSFER IN GENERAL. The pumps must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: cast iron, with threaded suction and delivery FLANGES ISO 228/1. IMPELLER: brass, of the type with centrifugal radial flow. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. NFm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. NF: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44.
OPTIONS ON REQUEST
44
NF129A
NF129B
NF130A
Head H (metres)
NF130B
Flow rate Q
TYPE
Single-phase NFm 128B NFm 128A NFm 128AR NFm 129B NFm 129A NFm 130C NFm 130B Three-phase NF 128B NF 128A NF 128AR NF 129B NF 129A NF 130C NF 130B NF 130A
POWER
kW HP
m3/h l/min
0 0
6 100
18
21
24 400
30 500
36 600
42 700
48 800
54
60
66
72
300 350 9.2 10.5 11.5 16 18.5 11.3 14 17.8 8 9.2 10.5 14 16.6 11.1 13.7 17.5
12.5 12 13.7 13.2 14.5 13.8 20.2 19.2 22.5 22 11.9 14.7 18.5
6.5 8 5 9.2 6.5 12 7.5 14.5 10 10.7 10.2 13.5 13.2 17.2 16.8
9.1 12 16
8 11 15
f a
DN2
h2
DN1
w1
w2
n1 DIMENSIONS mm h2 h3 n 167 264 196 167 264 196 167 264 167 264 196 159 269 206 159 269 206 159 269 206 193 313 240 193 313 193 313 240 193 313 240
TYPE Single-phase Three-phase NFm 128B NF 128B NFm 128A NF 128A NFm 128AR NF 128AR NFm 129B NF 129B NFm 129A NF 129A NFm 130C NF 130C NFm 130B NF 130B NF 130A
PORTS
DN1 DN2
h1
2" 2" 2" 2" 2" 2" 3" 3" 3" 3" 2" 2" 2" 2" 2" 2" 3" 3" 3" 3" a 65 65 65 56 56 56 71 71 71 f 344 344 344 344 372 398 392/372 390 416 410/390 410 h 271 271 271 276 276 276 320 320 320 h1 97 97 97 110 110 110 120 120 120 n1 160 160 160 160 160 160 190 190 190 w1 8 8 8 1 1 1 6 6 6 kg* w2 s 1~ 3~ 60 12 19.8 17.1 60 12 18.3 17.0 60 12 18.3 18.3 62 11 23.3 22.7 62 11 62 11 26.0 24.6 66 12 33.5 31.5 12 34.4 33.4 66 66 12 34.6 (*weight includes counterflanges)
h3
45
Centrifugal pumps made of cast iron, equipped with open impeller, ideal for transferring liquids containing impurities.
RANGE OF PERFORMANCE Flow rate up to 350 l/min (21 m3/h) Head up to 20 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 90C Liquid temperature up to + 40C in the NGAX version (with technopolymer impeller) Environment temperature up to + 40C Passage of solid bodies 10 mm CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
They are recommended for pumping water and liquids that are chemically non aggressive to the materials from which the pump is made. THE OPEN IMPELLER DESIGN ALLOWS THE PUMPING OF LIQUIDS WITH RELATIVELY HIGH LEVELS OF IMPURITIES WITHOUT RISK OF CLOGGING THE IMPELLER. FOR THIS REASON THE NGA SERIES ARE SUITABLE FOR USE IN INDUSTRY, FOR THE TRANSFER OF WATER FROM CANALS, RIVERS, RESERVOIRS, TANKS, ETC. The pumps must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: cast iron, with threaded ports ISO 228/1. BODY BACK-PLATE: stainless steel AISI 304. OPEN IMPELLER: stainless steel AISI 316. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. NGAm: single-phase 230V - 50 Hz with capacitor and thermal overload protector. NGA: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44.
OPTIONS ON REQUEST
impeller in technopolymer (NGAm...X - NGA...X) special mechanical seal other voltages or frequency 60 Hz
46
NGA1A NGA1B
Head H (metres)
Flow rate Q
TYPE
Single-phase NGAm 1B NGAm 1A Three-phase NGA 1B NGA 1A
POWER
kW HP
m3/h l/min
0 0 18 20
3 50 17 19.5
6 100 16 18
12 200 13 15
18 300 8 10
19.5 325 6 8
21 350 6
0.55 0.75
0.75 H metres 1
f a
DN2
h2
DN1
n1
PORTS
DN1 DN2
a 41 41 41
h1
s
47
Centrifugal pumps made of stainless steel AISI 316, equipped with an open impeller, ideal for transferring liquids containing impurities.
RANGE OF PERFORMANCE Flow rate up to 350 l/min (21 m3/h) Head up to 20 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 90C Environment temperature up to + 40C Passage of solid bodies 10 mm CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
They are recommended for pumping water and liquids that are chemically non aggressive to the materials from which the pump is made. THE OPEN IMPELLER DESIGN ALLOWS THE PUMPING OF LIQUIDS WITH RELATIVELY HIGH LEVELS OF IMPURITIES WITHOUT RISK OF CLOGGING THE IMPELLER. FOR THIS REASON THE PRO-NGA SERIES ARE SUITABLE FOR USE IN SYSTEMS FOR WASHING FRUIT, VEGETABLES, FISH, SHELLFISH, MEAT, IN INDUSTRIAL SYSTEMS FOR WASHING METAL PARTS, GLASS CONTAINERS, AND FOR THE CIRCULATION OF COOLING LIQUIDS. The pumps must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: stainless steel AISI 316, with threaded ports ISO 228/1. BODY BACK-PLATE: stainless steel AISI 316. OPEN IMPELLER: stainless steel AISI 316. MOTOR SHAFT: stainless steel AISI 316. MECHANICAL SEAL: ceramic - graphite - viton - AISI 316 ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. PRO-NGAm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. PRO-NGA: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44.
OPTIONS ON REQUEST
48
PRO-NGA1A PRO-NGA1B
Head H (metres)
Flow rate Q
TYPE
Single-phase Three-phase PRO-NGAm 1B PRO-NGA 1B PRO-NGAm 1A PRO-NGA 1A
POWER
kW HP
m3/h l/min
0 0 18 20
3 50 17 19.5
6 100 16 18
12 200 13 15
18 300 8 10
19.5 325 6 8
21 350 6
0.55 0.75
f a
DN2
h2
DN1
s n1
PORTS
DN1 DN2
a 41 41 41
h1
49
Two stage pumps recognised for their high efficiency, versatility and quiet running.
RANGE OF PERFORMANCE Flow rate up to 400 l/min (24 m3/h) Head up to 112 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 90C Liquid temperature up to + 40C in the 2CPX version (with technopolymer impeller) Environment temperature up to+ 40C CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. THEIR HIGH EFFICIENCY AND ADAPTABILITY TO THE MOST VARIED, EVEN UNUSUAL APPLICATIONS, MAKE THEM THE IDEAL CHOICE IN THE DOMESTIC, CIVIL AND INDUSTRIAL FIELD; IN PARTICULAR FOR DISTRIBUTING WATER IN COMBINATION WITH PRESSURE SETS, FOR INCREASING PRESSURE IN THE MAINS, FOR FIREFIGHTING SETS. The pumps must be installed in enclosed places, or at least protected against inclement weather.
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, with high efficiency (class EFF1 for powers from 4 to 7.5 kW), quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. 2CPm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector (up to 1.5 kW). 2CP: three-phase 230/400 V - 50 Hz up to 4 kW. 400/690 V - 50 Hz from 5.5 to 7.5 kW. INSULATION: class F. PROTECTION: IP 44.
2CP 25/130N
PUMP BODY: cast iron, with threaded ports ISO 228/1. BODY BACK-PLATE: stainless steel AISI 304. IMPELLER: stainless steel AISI 304 of the type with centrifugal radial flow.
Other 2CP
PUMP BODY: cast iron, with threaded ports ISO 228/1. IMPELLERS: brass, of the type with centrifugal radial flow.
OPTIONS ON REQUEST
impeller in technopolymer (2CPm...X - 2CP...X) special mechanical seal other voltages or frequency 60 Hz
50
Head H (metres)
Flow rate Q
51
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Single-phase 2CPm 25/130N 2CPm 25/140H 2CPm 160/160 Three-phase 2CP 25/130N 2CP 25/140H 2CP 160/160
POWER
kW HP
m3/h l/min
0 0 42 54 66
1.2 20 39 53 64
1.8 30 37 51 62
2.4 40 34 49 60
3.0 50 31 46 57
3.6 60 28.5 42 53
4.2 70 25.5 38 49
4.8 80 22 34 44
5.4 90 18 29 39.5
6.0 100 15 24 35
1 1.5 2
H metres
52
P2 (HP)
6.6 110 30
NPSH (feet)
H (feet)
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Single-phase
2CPm 25/140M 2CPm 25/160B
POWER
kW 1.1 1.5 2.2 HP 1.5 2 3 Q
m3/h l/min
0 0 47
1.2 20 46 56
1.8 30 45.5 55
2.4 40 44 54 65
3.0 50 43 53 63
3.6 60 42 52 62
4.2 70 41 50 60
4.8 80 38 48 58
5.4 90 36 46 56
6.0 100 34 44 54
6.6 110 31 41 51
7.5 125 27 37 47
8.4 140 22 33 42
9.6 160 26 35
Three-phase
2CP 25/140M 2CP 25/160B 2CP 25/160A
H metres 58 68
66.5 65.5
P2 (HP)
10.8 180 28
NPSH (feet)
H (feet)
53
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Single-phase
2CPm 32/200C
POWER
kW 3 4 HP 4 5.5 Q
m3/h l/min
0 0 70 85
2.4 40 81
3.0 50 80
3.6 60 65 79
4.2 70 64 78
4.8 80 63 77
5.4 90 62 76
6.6 110 59 74
7.5 125 57 72
8.4 140 55 69
9.6 160 52 66
Three-phase
2CP 32/200C 2CP 32/200B
H metres
66.5 65.5
49.5 46.5
54
P2 (HP)
NPSH (feet)
H (feet)
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Three-phase 2CP 32/210B 2CP 32/210A
POWER
kW HP Q
0 0 94 112
2.4 40 94 111
3.0 50 93.5
3.6 60 93
4.2 70 92
4.8 80 91 110
5.4 90 90 109
9.6 160 79 99
10.8 180 75 94
12.0 200 70 89
15.0 250 56 74
5.5 7.5
7.5 10
P2 (HP)
NPSH (feet)
H (feet)
55
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Three-phase 2CP 40/180C 2CP 40/180B 2CP 40/180A
POWER
kW HP
m3/h l/min
0 0 64 76 88
6.0 100 62 73 85
7.5 125 60 72 84
8.4 140 59 71 83
9.6 160 58 70 82
10.8 180 56 69 81
15.0 250 49 64 76
21.0 350 35 54 67
24.0 400 46 60
4 5.5 7.5
5.5 7.5 10
H metres
56
P2 (HP)
NPSH (feet)
H (feet)
f a
DN2
h2
DN1
s n1
TYPE Single-phase
2CPm 25/130N 2CPm 25/140H 2CPm 160/160 2CPm 25/140M 2CPm 25/160B 2CPm 32/200C
PORTS
DN1 DN2
DIMENSIONS mm a
73 74 84 74 86 86 86 95 95 95 108 108 108 108 108 108
h1
kg n1
142 162 185 162 185 185 185 206 206 206 232 232 232 232 232 232
Three-phase
2CP 25/130N 2CP 25/140H 2CP 160/160 2CP 25/140M 2CP 25/160B 2CP 25/160A 2CP 32/200C 2CP 32/200B 2CP 32/210B 2CP 32/210A 2CP 40/180C 2CP 40/180B 2CP 40/180A
f
330 382 405 382 401/381 407 401 464 464 464 542 542 542 496 542 542 542
h
201 225 263 225 263 263 263 304 304 304 334 334 334 334 334 334
h1
92 93 110 93 110 110 110 132 132 132 139 139 139 139 139 139
h2
109 132 153 132 153 153 153 172 172 172 195 195 195 195 195 195
n
180 200 225 200 225 225 225 266 266 266 292 292 292 292 292 292
w
1 23 26 23 26 26 26 19 19 19 21 21 21 21 21 21
s
10 10 10 11 10 11 11 11 14 14 14 14 14 14 14
1~
14.5 20.1 24.8 20.1 24.6 42.9 -
3~
14.0 19.4 24.1 19.2 25.2 26.1 39.1 42.9 56.0 61.7 49.8 55.1 60.8
1" 1" 1" 1" 1" 1" 11/4" 11/4" 11/4" 11/4" 11/2"
1"
11/2"" 1/2
11/2" 11/2" 2" 2"
11/4"
2" 2"
2" 2"
57
Particularly quiet running with high efficiency and low power consumption. Suitable for domestic applications.
RANGE OF PERFORMANCE Flow rate up to 130 l/min (7.8 m3/h) Head up to 50 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 40C Environment temperature up to+ 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron, with threaded ports ISO 228/1. BODY BACK-PLATE: stainless steel AISI 304. IMPELLERS: of the type with centrifugal radial flow, made of technopolymer (approved for drinking water). MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104 MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.. 2-3-4CPm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. 2-3-4CP: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL
OPTIONS ON REQUEST
58
4CP80E
4CP100E
3CP80E
Head H (metres)
3CP100E
2CP80E
Flow rate Q
TYPE
Single-phase 2CPm 80E 3CPm 80E 4CPm 80E 3CPm 100E 4CPm 100E Three-phase 2CP 80E 3CP 80E 4CP 80E 3CP 100E 4CP 100E
POWER
kW HP
m3/h l/min
0 0 27 38 50 36 46
0.3 5 26 36 48 35.5 45
0.6 10 25 35 47 35 44
0.9 15 24 34 45 34 43
1.2
1.5
1.8
2.4
3.0
3.6
4.2 70 5 10 16 23 30
4.8 80
5.4 90
6.0
6.6
7.2
7.8
20 25 30 40 50 60 22.5 21 20 16.5 13 9 33.5 31 29 25 20 15.5 43 40.5 38.5 33.5 28 22.5 33.5 32.5 32 30 28 26 42 41 40 38 35.5 33
100 110
120 130
10 15
5 10
f a
DN2
DN1
h2
w n1 s PORTS
DN1 DN2
TYPE Single-phase Three-phase 2CPm 80E 2CP 80E 3CPm 80E 3CP 80E 4CPm 80E 4CP 80E 3CPm 100E 3CP 100E 4CPm 100E 4CP 100E
DIMENSIONS mm h1 h2 n 134 38 158 134 38 158 158 38 134 38 158 134 38 158 134 61 158
h1
kg n1 116 116 116 116 116 116 w 2 2 2 2 2 s 9 9 9 9 9 1~ 8.6 9.4 10.8 10.2 13.4 3~ 8.6 8.9 10.2 9.4 12.3
59
Particularly quiet running with high efficiency and low power consumption. Suitable for domestic applications.
RANGE OF PERFORMANCE Flow rate up to 120 l/min (7.2 m3/h) Head up to 50 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 40C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: stainless steel AISI 304, with threaded ports ISO 228/1. BODY BACK-PLATE: stainless steel AISI 304. IMPELLERS: of the type with centrifugal radial flow, made of technopolymer (approved for drinking water). MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.. 3-4CRm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. 3-4CR: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44.
OPTIONS ON REQUEST
60
4CR80
3CR80
Head H (metres)
3CR100
Flow rate Q
TYPE
Single-phase 3CRm 80 4CRm 80 3CRm 100 Three-phase 3CR 80 4CR 80 3CR 100
POWER
kW HP
m3/h l/min
0.3 5 36 48 35.5
0.6 10 35 47 35
0.9 15 34 45 34
1.2
1.5
1.8
2.4 40 25 33.5 30
3.0 50 20 28 28
4.2 70 10 16 23
4.8 80 5 10 20
5.4 90
6.0 100
6.6 110
7.2 120
17
13.5
10
f a
DN2
h2 h h1
DN1
s n1
TYPE Single-phase Three-phase 3CRm 80 3CR 80 4CRm 80 4CR 80 3CRm 100 3CR 100
PORTS
DN1 DN2
a 90 90 90
61
RANGE OF PERFORMANCE Flow rate up to 50 l/min (3 m3/h) Head up to 47 m LIMITS OF USE Manometric suction lift up to 9 m Liquid temperature up to + 40C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron, with threaded ports ISO 228/1. BODY BACK-PLATE: stainless steel AISI 304. EJECTOR ASSEMBLY: technopolymer (approved for drinking water). IMPELLER: brass. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite -NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.. JSWm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. JSW: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL n 72753.
OPTIONS ON REQUEST
62
JSW1A
HS
JSW1B
JSW1C
Head H (metres)
Flow rate Q
TYPE
Single-phase JSWm 1C JSWm 1B JSWm 1A Three-phase JSW 1C JSW 1B JSW 1A
POWER
kW HP
m3/h l/min
0 0 35 41 47
0.3 5 32 36 42
0.6 10 27 31 38
0.9 15 24 27 34
1.2 20 21 24 31
1.5 25 19 22 28.5
1.8 30 17 20 26
2.1 35 16 19 24
2.4 40 15 17 22
2.7 45 14 16 21.5
3.0 50 13 15 19
f a
DN2
h2
DN1
h3
h1
s n1
PORTS
DN1 DN2
kg n 160 160 160 n1 124 124 124 w 24 24 24 s 10 10 10 1~ 9.3 10.0 10.2 3~ 9.1 9.5 10.1
63
RANGE OF PERFORMANCE Flow rate up to 80 l/min (4.8 m3/h) Head up to 70 m LIMITS OF USE Manometric suction lift up to 9 m Liquid temperature up to + 40C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron, with threaded ports ISO 228/1. BODY BACK-PLATE: stainless steel AISI 304. EJECTOR ASSEMBLY: technopolymer (approved for drinking water). IMPELLER: brass. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite -NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. JSWm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. JSW: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL n 72753.
OPTIONS ON REQUEST
64
JSW15H
JSW12H
Head H (metres)
JSW10M
Flow rate Q
TYPE
Single-phase JSWm 10H JSWm 12H JSWm 15H JSWm 10M JSWm 12M JSWm 15M Three-phase JSW 10H JSW 12H JSW 15H JSW 10M JSW 12M JSW 15M
POWER
kW HP
m3/h l/min
0 0 56 64 70 46 50 55
0.3 5 51 58 66 42 48 52
0.6 10 47 54 62 40 46 50
0.9 15 44 51 58 38 44 48
1.2 20 41 48 54 37 42 46
1.5 25 39 45 51 35 41 45
1.8 30 36 43 48 33 39 43
2.4 40 32 38 43 30 36 40
2.7 45 30 36 41 29 35 39
3.0 50 28 34 38 27 33 37
3.6 60
4.2 70
4.8 80
25 31 35
23 29 33
21 27 30
f a
DN2
h2 h3
DN1
h1
n1
TYPE Single-phase Three-phase JSWm 10H JSW 10H JSWm 12H JSW 12H JSWm 15H JSW 15H JSWm 10M JSW 10M JSWm 12M JSW 12M JSWm 15M JSW 15M
PORTS
DN1 DN2
kg n 180 180 180 180 180 180 180 n1 142 142 142 142 142 142 142 w 22 22 22 22 22 22 22 s 10 10 10 10 10 10 10 1~ 13.7 15.0 15.2 13.7 15.0 15.2 3~ 13.8 14.0 14.2 13.8 14.0 14.2
65
RANGE OF PERFORMANCE Flow rate up to 160 l/min (9.6 m3/h) Head up to 96 m LIMITS OF USE Manometric suction lift up to 9 m Liquid temperature up to + 40C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron, with threaded ports ISO 228/1. BODY BACK-PLATE: cast iron. EJECTOR ASSEMBLY: technopolymer (approved for drinking water). IMPELLER: brass. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. JSWm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. JSW: three-phase230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL n 72753.
OPTIONS ON REQUEST
66
JSW3AH
JSW3BH
JSW3AM
Head H (metres)
JSW3CH
JSW3BM
JSW3AL
JSW3CM
JSW3BL
JSW3CL
Flow rate Q
TYPE
Single-phase JSWm 3CH JSWm 3BH JSWm 3CM JSWm 3BM JSWm 3CL JSWm 3BL Three-phase JSW 3CH JSW 3BH JSW 3AH JSW 3CM JSW 3BM JSW 3AM JSW 3CL JSW 3BL JSW 3AL
POWER
kW HP
m3/h l/min
0 0
0.6 10 60 70 90 50 58 70 40 48 60
0.9 15 55 67 86 48 56 68 39 46 58
1.2 20 51 64 82 45 54 67 38 45 57
1.5 25 48 61 79 44 52 65 37 44 56
1.8 30 45 58 75 42 51 63 36 43 55
2.4 40 40 53 69 38 47 59 34 41 53
2.7 45 39 51 66 37 46 58 33 40 52
3.0 50 37 49 64 35 45 56 32 39 51
3.6 60 34 45 58 32 42 54 30 37 49
4.2 70 31 41 54 29 39 51 28 35 47
4.8 80 39 50 27 37 49 26 33 45
6.0
7.2
8.4
9.6
100 120
140 160
64 76 96 52 H metres 60 74 42 51 62
23 33 44 23 30 42
20 30 40 20 27 39
17 24 36.5
15 22 35
h2
DN1
h3
h1
n1
TYPE Single-phase Three-phase JSWm 3CH JSW 3CH JSWm 3BH JSW 3BH JSW 3AH JSWm 3CM JSW 3CM JSWm 3BM JSW 3BM JSW 3AM JSWm 3CL JSW 3CL JSWm 3BL JSW 3BL JSW 3AL
PORTS
DN1 DN2
11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4"
1" 1" 1" 1" 1" 1" 1" 1" 1" 1"
f 497 517/497 517 497 523 517/497 517 497 517/497 517
h 233 233 233 233 242 233 233 233 233 233
h1 165 165 165 165 165 165 165 165 165 165
DIMENSIONS mm h2 h3 43 208 43 208 43 208 43 208 43 208 43 208 43 208 43 208 43 208
kg n 206 206 206 206 206 206 206 206 206 n1 164 164 164 164 164 164 164 164 164 w 30 30 30 30 30 30 30 30 30 s 11 11 11 11 11 11 11 11 11 11 1~ 25.4 26.5 25.4 26.5 25.4 26.5 3~ 23.5 25.7 26.8 23.5 25.7 26.8 23.5 25.7 26.8
67
CONSTRUCTION CHARACTERISTICS
LIMITS OF USE Manometric suction lift up to 45 m Liquid temperature up to + 40C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron, with threaded ports ISO 228/1. EJECTOR BODY: cast iron NOZZLE, VENTURI AND DIFFUSER: technopolymer. IMPELLER: brass. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.. JDWm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. JDW: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44.
DESCRIPTION
Series Single-phase motor Motor size Type of nozzle and venturi Min. well diameter in inches
JDW m 1C / 30 - 4
68
TYPE
Single-phase
JDWm 1C/30 -4 JDWm 1B/30 -4 JDWm 1A/30 -4 JDWm 2/30 -4 JDWm 1C/20 -4 JDWm 1B/20 -4 JDWm 1A/20 -4 JDWm 2/20 -4 JDWm 1C/10 -4 JDWm 1B/10 -4 JDWm 1A/10 -4 JDWm 2/10 -4 JDWm 1C/30 -4 JDWm 1B/30 -4 JDWm 1A/30 -4 JDWm 2/30 -4 JDWm 2/20 -4 JDWm 1C/30 -4 JDWm -1B/30 -4 JDWm 1A/30 -4 JDWm 2/30 -4 JDWm 1A/30 -4 JDWm 2/30 -4 JDWm 2/30 -4 JDWm 2/30 -4 HS = Suction height
POWER
kW
0.50 0.60 0.75 1.1 0.50 0.60 0.75 1.1 0.50 0.60 0.75 1.1 0.50 0.60 0.75 1.1 1.1 0.50 0.60 0.75 1.1 0.75 1.1 1.1 1.1
HS
metres
Three-phase
JDW 1C/30-4 JDW 1B/30-4 JDW 1A/30-4 JDW 2/30 -4 JDW 1C/20-4 JDW 1B/20-4 JDW 1A/20-4 JDW 2/20 -4 JDW 1C/10-4 JDW 1B/10-4 JDW 1A/10-4 JDW 2/10 -4 JDW 1C/30-4 JDW 1B/30-4 JDW 1A/30-4 JDW 2/30 -4 JDW 2/20 -4 JDW 1C/30-4 JDW 1B/30-4 JDW 1A/30-4 JDW 2/30 -4 JDW 1A/30-4 JDW 2/30 -4 JDW 2/30 -4 JDW 2/30 -4
HP
0.70 0.85 1 1.5 0.70 0.85 1 1.5 0.70 0.85 1 1.5 0.70 0.85 1 1.5 1.5 0.70 0.85 1 1.5 1 1.5 1.5 1.5
TOTAL MANOMETRIC HEAD IN METRES 41 37 32 29 25 23 20 18 16 14 45 41 37 33 30 27 24 22 20 18 53 50 46 42 39 37 34 31 29 27 81 75 70 65 61 57 53 50 47 44 28 24 22 21 19 18 16 14 13 12 31 28 26 25 23 21.5 20 18.5 17 16 40 36 34 32 30 28 27 26 24.5 23 67 65 62 60 58 56 54 52.5 51 49 21 20 18 17 16 15.5 15 14 13 12 24 23 22 21 20 19.5 19 18 17 16 30 29 28 27 26 25.5 25 24 23 22 51 50 49 48 47 46 45 44.5 44 43 36 32 27 24 20 17 14 12 38 34 31 28 25 21.5 19 17 14 12 46 42 38 34 31 28 25 22 20 18 74 68.5 63 59 54 50 46 43 40 37.5 58 56 53 51 49 47 45.5 44 42 40 23 19 15 12 25 21 17 14 32 27 22 18 15.5 61 56 51 46.5 42 38 35 32.5 30 25 18.5 14 54 49 45 40 36 33 30 47 42.5 38 34 30 40 35 30 12 16 24 41 11 15 22 47 11.5 15.5 21 42
15
12 20 35 10 13 19 44 11 14 20 41
32.5 30 9 12.5 11.5 18 17 16 42.5 41 39.5 10 9.5 9 13.5 13 12 19.5 18.5 17.5 40 39 38
15 38
14 36
35
32
29
27
20
16 35 32.5 30 39 36 35
33
32
31
30
30
35 40 45
DN1
a1 h2
TUBO DI ASPIRAZIONE
ALIMENTAZIONE UGELLO
E HS = SUCTION HEIGHT
DN3
EJECTOR
De
a2
TYPE
DN4
Single-phase Three-phase DNp DN1 DN2 DN3 DN4 De JDWm 1C JDWm 1B JDWm 1A JDWm 2 JDW 1C JDW 1B JDW 1A JDW 2 4" 4" 4" 4" 4" 11/4" 11/4" 11/4" 11/4" 11/4" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 96 96 96 96 96
a1 46 46 46 46 46
DIMENSIONS mm h h1 h2 n 181 92 201 92 201 92 242 108 181 181 181 207 180 180 180 206
n1
kg* 1~ 3~
FOOT VALVE
DNp
144 24 10 15.0 15.0 144 24 10 15.3 15.3 10 144 24 10 16.4 15.4 164 22 10 24.6 22.7 (*weight includes ejector)
69
TYPE
Single-phase
JDWm 1C -3 JDWm 1B -3 JDWm 1A -3 JDWm 2 -3 JDWm 1C -3 JDWm 1B -3 JDWm 1A -3 JDWm 2 -3 JDWm 1C -3 JDWm 1B -3 JDWm 1A -3 JDWm 2 -3 JDWm 2 -3 HS = Suction height
POWER
kW
0.50 0.60 0.75 1.1 0.50 0.60 0.75 1.1 0.50 0.60 0.75 1.1 1.1
HS
0 120 240 metres 32 36 28 32 35 56 23 27 30 50 15 19 24 43 34 22 39 30 24 29 32 51 19 24 27 46
720
840
960
Three-phase
JDW 1C -3 JDW 1B -3 JDW 1A -3 JDW 2 -3 JDW 1C -3 JDW 1B -3 JDW 1A -3 JDW 2 -3 JDW 1C -3 JDW 1B -3 JDW 1A -3 JDW 2 -3 JDW 2 -3
HP
0.70 0.85 1 1.5 0.70 0.85 1 1.5 0.70 0.85 1 1.5 1.5
15
39 61 26 30
20
33 55 19 23
25
27 47
36
33
30
39
f a
DN2
DN1
a1 h2
TUBO DI ASPIRAZIONE
s HS = SUCTION HEIGHT
ALIMENTAZIONE UGELLO
DN3
EJECTOR
De
a2
TYPE
DN4
Single-phase Three-phase DNp DN1 DN2 DN3 DN4 De JDWm 1C JDWm 1B JDWm 1A JDWm 2 JDW 1C JDW 1B JDW 1A JDW 2 4" 4" 3" 4" 4" 11/4" 11/4" 1" 11/4" 11/4" 1" 1" 1" 1" 1" 1" 1" 3/4" 1" 1" 1" 1" 1" 1" 1"
a1 46 46 46 46 46
DIMENSIONS mm h h1 h2 n 181 92 201 92 201 92 242 108 181 181 181 207 180 180 180 206
n1
kg* 1~ 3~
FOOT VALVE
DNp
144 24 10 14.3 14.3 144 24 10 14.6 14.6 10 144 24 10 15.7 14.7 164 22 10 23.9 22.0 (*weight includes ejector)
70
TYPE
Single-phase
JDWm 1C -2 JDWm 1B -2 JDWm 1A -2 JDWm 2 -2 JDWm 1C -2 JDWm 1B -2 JDWm 1A -2 JDWm 2 -2 JDWm 1C -2 JDWm 1B -2 JDWm 1A -2 JDWm 2 -2 JDWm 1C -2 JDWm 1B -2 JDWm 1A -2 JDWm 2 -2 JDWm 1B -2 JDWm 1A -2 JDWm 2 -2 JDWm 2 -2 JDWm 2 -2 HS = Suction height
POWER
kW
0.50 0.60 0.75 1.1 0.50 0.60 0.75 1.1 0.50 0.60 0.75 1.1 0.50 0.60 0.75 1.1 0.60 0.75 1.1 1.1 1.1
HS
0 120 240 360 metres 46 50 54 85 34 38 40 71 28 32 35 64 23 27 28 56 21 23 51 41 36 42 46 50 78 29 33 35 63 24 28 31 59 18 22 24 50 15 18 45 36 30 37 42 46 74 24 29 31 58 20 25 28 55 13 18 21 46 15 41 33
840
960
1080
1200
Three-phase
JDW 1C JDW 1B JDW 1A JDW 2 JDW 1C JDW 1B JDW 1A JDW 2 JDW 1C JDW 1B JDW 1A JDW 2 JDW 1C JDW 1B JDW 1A JDW 2 JDW 1B JDW 1A JDW 2 JDW 2 JDW 2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 -2
HP
0.70 0.85 1 1.5 0.70 0.85 1 1.5 0.70 0.85 1 1.5 0.70 0.85 1 1.5 0.85 1 1.5 1.5 1.5
15
20
34
25
36
30
38
34
31
35 40 45
37
33
h2
a1
E HS = SUCTION HEIGHT
w
DN1
s
SUCTION PORT NOZZLE FEED PORT
n1 n
EJECTOR
a2
De
GASKETS
TYPE
Single-phase Three-phase DNp DN1 JDWm 1C JDW 1C 4" 11/4" JDWm 1B JDW 1B 4" 11/4" 2" 11/4" JDWm 1A JDW 1A 4" 11/4" JDWm 2 JDW 2 4" 11/4" DN2 DN3 De 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" a a1 a2 148 148 123 148 148 96 69.5 46 96 132.5 46 49 96 69.5 46 46 96 138 46
h1
DIMENSIONS mm f h h1 h2 350 460 350 540 181 92 201 92 201 92 242 108 181 181 181 207
w 24 24 24 22
s 10 10 10 10 10
DN3
FOOT VALVE
DNp
71
RANGE OF PERFORMANCE Flow rate up to 80 l/min (4.8 m3/h) Head up to 72 m LIMITS OF USE Manometric suction lift up to 9 m Liquid temperature up to + 40C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: stainless steel AISI 304, with threaded ports ISO 228/1. BODY BACK-PLATE: stainless steel AISI 304. EJECTOR ASSEMBLY: technopolymer (approved for drinking water). IMPELLER: technopolymer (for drinking water). MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104 MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.. JCRm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. JCR: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44.
OPTIONS ON REQUEST
72
JCR15H
JCR12H
JCR10H
Head H (metres)
JCR1B JCR1C
Flow rate Q
TYPE
Single-phase JCRm 1C JCRm 1B JCRm 1A JCRm 10H JCRm 12H JCRm 15H JCRm 10M JCRm 12M JCRm 15M Three-phase JCR 1C JCR 1B JCR 1A JCR 10H JCR 12H JCR 15H JCR 10M JCR 12M JCR 15M
POWER
kW HP
m3/h l/min
0 0 35 41 47 56 64 72 46 50 55
0.3 5 32 36 42 50 58 67 44 48 53
0.6 10 27 31 38 45 53 61 41 45 50
0.9 15 24 27 34 41 48 56 39 43 48
1.2 20 21 24 31 37 44 51 37 41 46
1.5 25 19 22 28.5 33 40 47 35 39 43
1.8 30 17 20 26 30 36 43 32 37 41
2.1 35 16 19 24 27 33 40 30 36 39
2.4 40 15 17 22 25 31 37 28 34 37
3.0 50 13 15 19 22 26 32 25 30 34
3.6 60
4.2 70
4.8 80
22 27 31
21 25 29
19 23 27
h2 h h1
DN1
n1
TYPE Single-phase Three-phase JCRm 1C JCR 1C JCRm 1B JCR 1B JCRm 1A JCR 1A JCRm 10H-M JCR 10H-M JCRm 12H-M JCR 12H-M JCRm 15H-M JCR 15H-M
PORTS
DN1 DN2
DIMENSIONS mm h1 h2 n 122 52 160 122 52 160 122 52 160 145 55 184 145 55 184 184 145 55 184
kg n1 120 120 120 135 135 135 w 95 95 95 110 110 110 110 s 9 9 9 10 10 10 1~ 5.6 5.7 6.9 9.4 10.5 10.8 3~ 5.8 6.0 6.5 9.6 9.6 10.4
73
RANGE OF PERFORMANCE Flow rate up to 200 l/min (12 m3/h) Head up to 120 m LIMITS OF USE Manometric suction lift up to 9 m Liquid temperature up to + 40C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron and stainless steel AISI 304 (cast iron up to 0.75 kW), with threaded ports ISO 228/1. IMPELLER: technopolymer (approved for drinking water). MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104 MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. PLURIJETm: single-phase 230 V - 50 Hz with capacitor nd thermal overload protector. PLURIJET: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL.
OPTIONS ON REQUEST
version in stainless steel EN 10088-3 - 1.4401 (AISI 316) other voltages or frequency 60 Hz
74
PLURIJET 6/90
5/90
Head H (metres)
4/80 3/80
Flow rate Q
TYPE
Single-phase
PLURIJETm 3/80 PLURIJETm 4/80 PLURIJETm 5/90 PLURIJETm 6/90
POWER
kW HP
m3/h l/min
0 0 38 50 83 100
0.3 5 36 48 82 99
1.2 20 32 43 76 91.5
1.8 30 29 38.5 71 85
2.4 40 25 33.5 65 78
3.0 50 20 28 59 71
4.8 80 5 10 40 48
Three-phase
PLURIJET 3/80 PLURIJET 4/80 PLURIJET 5/90 PLURIJET 6/90
PLURIJET 80
f a
DN2
PLURIJET 90
n
DN2
DN1
h2
h2
DN1
h1 h
s a w
h1
s n1
PORTS
DN1 DN2
a 110 135 69 69 69
DIMENSIONS mm h1 h2 n 134 38 158 134 158 38 134 38 158 166 46 185 153 46 185 166 46 185
kg n1 116 116 116 145 145 145 w 2 2 2 304 335 s 9 9 9 10 10 10 1~ 9.4 10.8 25.5 27.5 3~ 8.9 10.2 23.5 27.0
75
PLURIJET 6/130
5/130
Head H (metres)
4/130
Flow rate Q
TYPE
Single-phase
PLURIJETm 3/100 PLURIJETm 4/100 PLURIJETm 3/130 PLURIJETm 4/130 PLURIJETm 5/130
POWER
kW HP
m3/h l/min
0 0 36 46 50 66 83 100
0.6 10 35 43 49 65 81 98
1.2 20 33.5 42 48 64 80 96
1.8 30 32 40 47 62 78 94
7.8 130 5 25 33 41 50
Three-phase
PLURIJET 3/100 PLURIJET 4/100 PLURIJET 3/130 PLURIJET 4/130 PLURIJET 5/130 PLURIJET 6/130
PLURIJET 100
PLURIJET 130
f a
DN2
n
DN2
h2
h2
DN1
DN1
n1
h1
h1
s n1
PORTS
DN1 DN2
PLURIJETm 3/100 PLURIJET 3/100 PLURIJETm 4/100 PLURIJET 4/100 PLURIJETm 3/130 PLURIJET 3/130 PLURIJETm 4/130 PLURIJET 4/130 PLURIJETm 5/130 PLURIJET 5/130 PLURIJET 6/130
a 110 135 69 69 69 69 69
DIMENSIONS mm h1 h2 n 134 38 158 134 158 134 61 158 166 46 185 166 46 185 153 46 185 166 46 185 166 46 185
kg n1 116 116 116 145 145 145 145 145 w 2 2 2 241 272 304 335 s 9 9 9 10 10 10 10 10 1~ 10.2 13.4 23.5 25.9 27.5 3~ 9.4 12.3 21.6 25.0 27.0 29.0
76
PLURIJET 6/200
5/200
Head H (metres)
4/200
3/200
Flow rate Q
TYPE
Single-phase Three-phase
PLURIJETm 3/200 PLURIJET 3/200 PLURIJETm 4/200 PLURIJET 4/200 PLURIJETm 5/200 PLURIJET 5/200 PLURIJET 6/200
POWER
kW HP
m3/h l/min
0 0 45 60 75 90
1.2 20 44 58 73 88
2.4 40 43 57 71.5 86
3.0 50 42 56 70 84
3.6 60 41 54.5 68 82
4.8 80 39 52 65 78
6.0 100 36 48 60 72
12.0 200 15 20 25 30
1.5 2 2.5 3
H metres
f
DN2
h2
DN1
h1
s n1
PORTS
DN1 DN2
PLURIJETm 3/200 PLURIJET 3/200 PLURIJETm 4/200 PLURIJET 4/200 PLURIJETm 5/200 PLURIJET 5/200 PLURIJET 6/200
a 69 69 69 69 69
DIMENSIONS mm h1 h2 n 166 46 185 166 46 185 153 46 185 166 46 185 166 46 185
kg n1 145 145 145 145 145 w 241 272 304 335 s 10 10 10 10 10 1~ 23.5 25.9 27.5 3~ 21.6 25.0 27.0 29.0
77
RANGE OF PERFORMANCE Flow rate up to 50 l/min (3 m3/h) Head up to 51 m LIMITS OF USE Manometric suction lift up to 9 m Liquid temperature up to + 90C (+55C for diesel fuel) Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron, with threaded ports ISO 228/1. MOTOR BRACKET (patent n 1289150): aluminium with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity. IMPELLER: brass of the star type with open radial vanes. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - VITON. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. CKm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. CK: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL
OPTIONS ON REQUEST
CKm/INT version with switch and power cable with Schuko plug CKm 50-BP/NZ aluminium trigger dispensing nozzle and 4 metre spiral reinforced hose. special mechanical seal other voltages or frequency 60 Hz protection IP 55
78
CK90E CK80E
Head H (metres)
CK50
CK50BP
Flow rate Q
TYPE
Single-phase CKm 50 CKm 50-BP CKm 80-E CKm 90-E Three-phase CK 50 CK 50-BP CK 80-E CK 90-E
POWER
kW HP
m3/h l/min
0 0 35 20 48 51
0.3 5 31 20 46 49
0.6 10 27 20 42 45
0.9 15 24 20 38 41
1.2 20 20 20 34 37
1.5 25 16 16.5 30 33
1.8 30 13 13 26 29
2.1 35 9 9 22 25
2.4 40 5 5 18 21
3.0 50
10 13
i
DN2
h2
DN1
h3
h1
n1 n
TYPE Single-phase Three-phase CKm 50 CKm 50-BP CKm 80-E CKm 90-E CK 50 CK 50-BP CK 80-E CK 90-E
PORTS
DN1 DN2
a 41 44 50 50 50
h2 25 25 25 31 31 31
kg m 80 80 80 90 90 90 n 120 120 120 134 134 134 n1 100 100 100 112 112 112 w 69 69 69 77 77 77 s 7 7 7 7 7 1~ 7.3 7.3 7.3 11.6 11.8 3~ 6.8 6.8 6.8 10.8 11.0
79
Dependable priming and starting, even after long periods without use, thanks to anti seize inserts which prevent rusting around the impeller.
RANGE OF PERFORMANCE Flow rate up to 50 l/min (3 m3/h) Head up to 54 m LIMITS OF USE Manometric suction lift up to 9 m Liquid temperature up to + 90C (+55C for diesel fuel) Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron with stainless steel insert to prevent the impeller seizing due to rust. Inlet ports threaded to ISO 228/1. MOTOR BRACKET (patent n 1289150): aluminium with brass insert; eliminates starting difficulties due to seizure of the impeller after long periods of inactivity. IMPELLER: brass of the star type with open radial vanes. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - VITON. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.. CKRm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. CKR: three-phase 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44. REGISTERED MODEL
OPTIONS ON REQUEST
CKRm/INT version with switch and power cable with Schuko plug special mechanical seal other voltages or frequency 60 Hz protection IP 55
80
Head H (metres)
Flow rate Q
TYPE
Single-phase CKRm 80-E CKRm 90-E CKRm 100-E Three-phase CKR 80-E CKR 90-E CKR 100-E
POWER
kW HP
m3/h l/min
0 0 48 51 54
0.3 5 46 49 52
0.6 10 42 45 48
0.9 15 38 41 44
1.2 20 34 37 40
1.5 25 30 33 36
1.8 30 26 29 32
2.1 35 22 25 28
2.4 40 18 21 24
3.0 50 10 13 16
i
DN2
h2
DN1
h3
h1
n1 n
TYPE Single-phase Three-phase CKRm 80-E CKR 80-E CKRm 90-E CKR 90-E CKRm 100-E CKR 100-E
PORTS
DN1 DN2
1"
1"
1"
1"
1"
1"
a 50 50 50
h2 31 31 31
kg n 134 134 134 n1 112 112 112 w 77 77 77 s 7 7 7 1~ 11.6 11.8 11.8 3~ 10.8 11.0 12.0
81
New patented motor design, high efficiency class EFF1, for maximum energy saving.
RANGE OF PERFORMANCE Flow rate up to 6000 l/min (360 m3/h) Head up to 95 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature from -10C to + 90C Environment temperature from -10C to + 40C Max. pressure in the pump body 10 bar (PN10) CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron, complies with dimensional standards EN 733 - DIN 24255 and UNI 7467-NF E-44-111, with flanged suction and delivery ports complete with threaded steel counterflanges. BODY BACK-PLATE: cast iron. IMPELLER: brass for models F32/160, F32/200, F40/160, F40/200, F50/125 e F50/160. IMPELLER: cast iron for models F40/250, F50/200, F50/250, F65/125, F 65/160, F65/200, F80/160, F100/160 MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, asynchronous type with high efficiency (class EFF1 for powers from 4 to 22 kW), quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. Fm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector (up to 1.5 kW). F: three-phase 230/400 V - 50 Hz up to 4 kW. 400/690 V - 50 Hz from 5.5 to 22 kW. INSULATION: class F. PROTECTION: IP 44.
OPTIONS ON REQUEST
pump shaft in stainless steel EN 10088-3 - 1.4401 (AISI 316) special mechanical seal other voltages or frequency 60 Hz protection IP 55 for liquids with higher or lower temperatures for environments with higher or lower temperatures
82
Head H (m)
20
Flow rate Q
83
DN1= 50 DN2= 32
F32/160A
55 60 63
F32/160B
Head H (metres)
=65.5%
63
F32/160C
60
55
NPSH (metres)
B C
Flow rate Q
TYPE
Single-phase Fm 32/160C Fm 32/160B Fm 32/160A Three-phase F 32/160C F 32/160B F 32/160A
POWER
kW HP Q
m3/h l/min
0 0 25
6 100 24 30 37
9 150 23 29 36
12 200 21 28 34
15 250 19 26 32
18 300 16 23.5 30
21 350 13 20 27.5
24 400
27 450
1.5 2.2 3
2 3 4
H metres
31 38
16 24 20
84
P2 (HP)
NPSH (feet)
H (feet)
DN1= 50 DN2= 32
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Three-phase F 32/200C F 32/200B F 32/200A
POWER
kW HP Q
m3/h l/min
0 0 46
6 100 44 52 57
12 200 41.5 49 56
15 250 40 47 55
18 300 38 45 53
21 350 36 43 52
24 400 34 41 50
30 500
4 5.5 7.5
5.5 7.5 10
H metres
54 60
36 44
P2 (HP)
NPSH (feet)
H (feet)
85
DN1= 50 DN2= 32
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Single-phase Fm 32/200BH Three-phase F 32/200BH F 32/200AH
POWER
kW HP
m3/h l/min
0 0 49 59
6 100 45 55
9 150 42 52
12 200 39 49
15 250 34 44
18 300 28 38
3 4
4 5.5
H metres
86
P2 (HP)
NPSH (feet)
H (feet)
DN1= 65 DN2= 40
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Single-phase Fm 40/160C Fm 40/160B
POWER
HP Q
m3/h l/min
0 0 27
6 100 27 32 38
12 200 26 31 37
18 300 25 30 36
30 500 19 24 30
36 600 14 20 26
42 700
3 4 5.5
H metres
32 38
20
P2 (HP)
NPSH (feet)
H (feet)
87
DN1= 65 DN2= 40
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Three-phase F 40/200B F 40/200A
POWER
kW HP Q
m3/h l/min
0 0 48 56
6 100 47 55
9 150 46.5 55
12 200 46
15 250 45.5
18 300 44.5
24 400 42
30 500 38
36 600 34
42 700 28
5.5 7.5
7.5 H metres 10
55 54.5 54 52.5 49.5 46 41 Tolerance of the performance curves according to EN ISO 9906 App. A.
88
P2 (HP)
NPSH (feet)
H (feet)
DN1= 65 DN2= 40
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Three-phase F 40/250C F 40/250B F 40/250A
POWER
kW HP Q
m3/h l/min
0 0 64 71 88
6 100 64 71 88
12 200 63 70 87
18 300 62 69 86
24 400 60 67 84
30 500 56.5 64 81
36 600 52.5 60 77
42 700 47 55 72
9.2 11 15
12.5 15 H metres 20
P2 (HP)
NPSH (feet)
H (feet)
89
DN1= 65 DN2= 50
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Fm 50/125C F 50/125C Fm 50/125B F 50/125B F 50/125A
POWER
HP Q
m3/h l/min
0 0 18.5
24 400 17 20 23
54 900 12 15 18.3
72 1200 6 9 13
3 4 5.5
90
P2 (HP)
NPSH (feet)
H (feet)
DN1= 65 DN2= 50
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Three-phase F 50/160C F 50/160B F 50/160A
POWER
kW HP Q
m3/h l/min
0 0 27 33 38
18 300 27 32 37
30 500 25 31 36.5
36 600 24.5 30 36
42 700 23 29 34
48 800 20 27 33
54 900 18.5 26 32
60 1000 16 24 30
66 1100 21 27
4 5.5 7.5
5.5 7.5 10
H metres
P2 (HP)
NPSH (feet)
H (feet)
91
DN1= 65 DN2= 50
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Three-phase F 50/200C F 50/200B F 50/200A F 50/200AR
POWER
kW HP
m3/h l/min
24 400 44 52 61 69
36 600 44 52 61 69
60 1000 42 50 60 68
72 1200 39 47 57 65
84 1400 36 44 54 62
96 1600 33 40 50 58
102 1700 30 38 48 56
108 1800
11 15 18.5 22
15 20 25 30
H metres
45 53
92
P2 (HP)
NPSH (feet)
H (feet)
DN1= 65 DN2= 50
F50/250AR
48 51 52 54 55 58 59 =59%
F50/250A
60
F50/250B
Head H (metres)
F50/250C
F50/250D
57
54 52
NPSH (metres)
AR A
C D
Flow rate Q
TYPE
Three-phase F 50/250D F 50/250C F 50/250B F 50/250A F 50/250AR
POWER
kW HP
m3/h l/min
0 0 51 59 72 85 95
18 300 51 59 72 85 95
24 400 49 58 71 84 94
30 500 47 57 70 83 93
36 600 44 54 69 82 92
42 700 41 51 67 80 90
48 800 37 47 65 78 88
54 900 32 42 62 76 86
60 1000
9.2 11 15 18.5 22
12.5 15 20 H metres 25 30
59 73 83
P2 (HP)
NPSH (feet)
H (feet)
93
DN1= 80 DN2= 65
F65/125A
78
83 87 87.5 =88%
87.5
Head H (metres)
F65/125B
F65/125C
NPSH (metres)
B C
Flow rate Q
TYPE
Three-phase F 65/125C F 65/125B F 65/125A
POWER
kW HP Q
m3/h l/min
0 0 16 18 23
36 600 16 18 23
48 800 16 18 23
60 1000 15.5 18 23
132 2200
4 5.5 7.5
5.5 7.5 10
H metres
18
94
P2 (HP)
NPSH (feet)
H (feet)
87
DN1= 80 DN2= 65
F65/160A F65/160B
60
65
70
75
78 80 =81%
Head H (metres)
80 78
NPSH (metres)
B C
Flow rate Q
TYPE
Three-phase F 65/160C F 65/160B F 65/160A
POWER
kW HP Q
m3/h l/min
0 0 32 37 41
60 1000 32 36 40
84 1400 30 34 39
96 1600 29 33 37.5
108 1800 27 31 36
120 2000 25 29 34
132 2200 22 26 31
144 2400
9.2 11 15
12.5 15 H metres 20
23 28
P2 (HP)
NPSH (feet)
H (feet)
F65/160C
95
DN1= 80 DN2= 65
F65/200AR
60 65 71 73 74 76
F65/200A
=79%
76
Head H (metres)
74 73
F65/200B
71
NPSH (metres)
AR A B
Flow rate Q
TYPE
Three-phase F 65/200B F 65/200A F 65/200AR
POWER
kW HP Q
m3/h l/min
24 400 45 51 57
36 600 45 51 57
48 800 45 51 57
60 1000 45 51 57
72 1200 44 50 56
84 1400 42.5 49 55
96 1600 41 47 53
126 2100 40 46
15 18.5 22
20 25 30
H metres
96
P2 (HP)
NPSH (feet)
H (feet)
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Three-phase F 80/160D F 80/160C F 80/160B F 80/160A
POWER
kW HP
m3/h l/min
0 0 25 30 35 40
30 500 25 30 35 40
60 1000 25 30 35 40
150 2500 21 26 31 36
180 3000 18 23 28 33
240 4000 10 15 20 25
11 15 18.5 22
15 20 25 30
H metres
P2 (HP)
NPSH (feet)
H (feet)
97
Head H (metres)
NPSH (metres)
Flow rate Q
TYPE
Three-phase F 100/160C F 100/160B F 100/160A
POWER
kW HP Q
m3/h l/min
0 0 28
60 1000 28 32 35
180 3000 22 27 31
300 5000 12 17 22
330 5500
360 6000
15 18.5 22
20 25 30
H metres
32 35
13 18 15
98
P2 (HP)
NPSH (feet)
H (feet)
h2
DN1
w1 w2
n1 n2
TYPE Single-phase Three-phase Fm 32/160C F 32/160C Fm 32/160B F 32/160B Fm 32/160A F 32/160A F 32/200C F 32/200B F 32/200A Fm 32/200BH F 32/200BH F 32/200AH Fm 40/160C F 40/160C Fm 40/160B F 40/160B F 40/160A F 40/200B F 40/200A F 40/250C F 40/250B F 40/250A Fm 50/125C F 50/125C Fm 50/125B F 50/125B F 50/125A F 50/160C F 50/160B F 50/160A F 50/200C F 50/200B F 50/200A F 50/200AR F 50/250D F 50/250C F 50/250B F 50/250A F 50/250AR F 65/125C F 65/125B F 65/125A F 65/160C F 65/160B F 65/160A F 65/200B F 65/200A F 65/200AR F 80/160D F 80/160C F 80/160B F 80/160A F 100/160C F 100/160B F 100/160A
PORTS
DN1 DN2
a 80 80 80 80 80 80 80 80 80 80 80 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 125 125 125 125 125 125 125
f 412 431/412 465/431 469 515 515 515 469 469 469 431/412 465/431 465 535 535 535 606 606 606 701 450/431 484/450 484 489 535 535 535 616 711 711 711 743 606 606 606 701 701 701 733 511 557 557 557 621 621 621 716 719 719 719 751 652 747 747 747 779 758 758 758 790
h 292 292 292 340 340 340 340 340 292 292 292 340 340 340 405 405 405 292 292 292 340 340 340 360 360 360 360 360 405 405 405 405 405 340 340 340 360 360 360 405 405 405 405 405 405 405 480 480 480
h1 132 132 132 160 160 160 160 160 132 132 132 160 160 160 180 180 180 132 132 132 160 160 160 160 160 160 160 160 160 180 180 180 180 180 160 160 160 160 160 160 180 180 180 180 180 180 180 200 200 200
DIMENSIONS h2 n 160 242 160 242 160 242 180 270 180 270 180 270 180 270 180 270 160 240 160 240 160 240 180 275 180 275 180 275 225 328 225 328 225 328 160 242 160 242 160 242 180 269 180 269 180 269 200 316 200 316 200 316 200 316 200 316 225 337 225 337 225 337 225 337 225 337 180 291 180 291 180 291 200 300 200 300 200 300 225 340 225 340 225 340 225 330 225 330 330 225 330 225 330 280 362 280 362 280 362
DN
mm n1 190 190 190 190 190 190 190 190 190 190 190 190 212 212 212 250 250 250 190 190 190 212 212 212 212 212 212 212 250 250 250 250 250 212 212 212 212 212 212 212 250 250 250 250 250 250 250 280 280 280
h1
kg* n2 240 240 240 240 240 240 240 240 240 240 240 240 265 265 265 320 320 320 240 240 240 265 265 265 265 265 265 265 320 320 320 320 320 280 280 280 280 280 280 280 320 320 320 320 320 320 320 360 360 360
DN
w1 35 35 35 35 35 35 35 35 35 35 35 35 35 47.5 47.5 47.5 35 35 35 35 35 35 35 35 35 35 35 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 60 60 60
w2 35 35 35 35 35 35 35 35 35 35 35 35 35 47.5 47.5 47.5 35 35 35 35 35 35 35 35 35 35 35 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 47.5 60 60 60
s 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 18 18 18
3~ 38.4 39.2 42.6 52.1 57.0 63.0 48.5 52.8 41.2 43.9 50.5 61.4 65.9 108.0 115.0 132.0 41.4 44.2 50.5 55.5 60.5 65.0 105.3 121.7 134.2 145.7 111.0 118.0 135.0 148.0 159.5 62.0 67.7 72.0 100.0 107.0 123.0 128.0 141.5 153.0 112.5 129.5 142.5 154.0 141.2 153.7 165.2
DN FLANGES mm
32 40 50 65 80 100 125
t mm
140 150 165 185 200 220 250
u mm
100 110 125 145 160 180 210
N
4 4 4 18 8 8 8 8
HOLES (mm)
18 18 18 18 18
u t
u t
99
RANGE OF PERFORMANCE Flow rate up to 90 l/min (5.4 m3/h) Head up to 55 m. LIMITS OF USE Liquid temperature up to + 90C Environment temperature up to + 40C
CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. THE NON-FERROUS CONSTRUCTION GUARANTEES AGAINST RUST AND OXIDATION. THE COMPACT DESIGN AND HYDRAULIC CHARACTERISTICS SUIT INDUSTRIAL APPLICATIONS INCLUDING COOLING AND CONDITIONING SYSTEMS. The pumps must be installed in enclosed places, or at least protected against inclement weather.
PUMP BODY: bronze, with threaded ports ISO 228/1. MOTOR BRACKET (patent n 1289150) PK-Bz, PQ-Bz: aluminium with brass front insert. BODY BACK-PLATE: CP-Bz: stainless steel AISI 316. IMPELLER: PK-Bz, PQ-Bz: brass. CP-Bz: stainless steel AISI 316 MOTOR SHAFT: stainless steel AISI 316. MECHANICAL SEAL: ceramic - graphite - VITON. ELECTRIC MOTOR: induction motor, for continuous duty. Single-phase: 230 V - 50 Hz with capacitor and thermal overload protector. Three-phase: 230/400 V - 50 Hz. INSULATION: class F. PROTECTION: IP 44.
OPTIONS ON REQUEST
special mechanical seal other voltages or frequency 60 Hz protection IP 55 for liquids with higher temperatures for environments with higher temperatures
100
PK65Bz
PK60Bz
Head H (metres)
Flow rate Q
TYPE
Single-phase PKm 60-Bz PKm 65-Bz Three-phase PK 60-Bz PK 65-Bz
POWER
kW HP
m3/h l/min
0 0 40 55
0.3 5 38 50
0.9 15 29 40.5
1.2 20 24 36
1.5 25 19.5 31
1.8 30 15 27
2.1 35 10 22
2.4 40 5 17
3.0 50 8
0.37 0.50
f
DN2
h2
DN1
h3
h1
n1 n
PORTS
DN1 DN2
a 42 48
f 243 258/250
h1 63 63 63
h2 75 80
kg n 120 120 120 n1 100 100 100 w 55 55 55 s 7 7 7 1~ 5.7 8.1 3~ 5.7 6.8
101
PQ65Bz
PQ60Bz
Head H (metres)
Flow rate Q
TYPE
Single-phase PQm 60-Bz PQm 65-Bz Three-phase PQ 60-Bz PQ 65-Bz
POWER
kW HP
m3/h l/min
0 0 40 55
0.3 5 38 50
0.9 15 29 40.5
1.2 20 24 36
1.5 25 19.5 31
1.8 30 15 27
2.1 35 10 22
2.4 40 5 17
3.0 50 8
0.37 0.50
f
DN2
h2
DN1
h3
h1
s a w m
n1 n
PORTS
DN1 DN2
a 22 22 22
h1 108 113
h2 30 30 30
kg n 120 120 120 n1 100 100 100 w 55 57 s 7 7 7 1~ 5.5 7.4 3~ 5.5 6.6
102
CP158Bz
Head H (metres)
CP130Bz
Flow rate Q
TYPE
Single-phase CPm 130-Bz CPm 158-Bz Trifase CP 130-Bz CP 158-Bz
POWER
kW HP
m3/h l/min
0 0 23 36
0.6 10 22 34
1.2 20 21 33.5
1.8 30 20 33
2.4 40 19 32.5
3.0 50 18 31.5
3.6 60 17 30
4.8 80 14 27
5.4 90 25
0.37 0.75
0.50 H metres 1
h2
DN1
w n1
PORTS
DN1 DN2
a 42 42 42
f 259 285
h 205 240
h1 82 92
h1
103
RANGE OF PERFORMANCE Flow range up to 50 l/min (3 m3/h) Head up to 70 m LIMITS OF USE Manometric suction lift up to 9 m Liquid temperature up to + 40C Environment temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: BETTY: cast iron; BETTYNOX: stainless steel AISI 304. BETTY 60, 65, 70, 80: CHECK FLAP VALVE built into the suction port. IMPELLER: BETTY 60, 65, 70, 80: brass, type with radial peripheral vanes; BETTY 1, 2, 3 BETTYNOX: technopolymer, centrifugal type. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. ELECTRIC MOTOR: induction motor, for continuous duty. Single-phase: 230 V - 50 Hz with capacitor and thermal overload protector. INSULATION: class F. PROTECTION: IP 44.
104
BETTY 80 BETTY 70
BETTY 65
Head H (metres)
BETTY 60
Flow rate Q
TYPE
Single-phase BETTY 60 BETTY 65 BETTY 70 BETTY 80
POWER
kW HP
m3/h l/min
0 0 40 55 65 70
0.3 5 38 50 62 66
0.9 15 29 40.5 52 56
1.2 20 24 36 47 51
1.5 25 19.5 31 42 46
1.8 30 15 27 37 41
2.1 35 10 22 32 36.5
2.4 40 5 17 27 31
2.7 45 12.5 22 27
3.0 50 8 18 22
n1
2
h1
DN1
DN2
PORTS
DN1 DN2
1 20
2 20
DIMENSIONS mm h h1 273 267 273 267 267 273 273 267 273 267
kg n 220 220 220 220 220 n1 160 160 160 160 160 7.9 9.5 12.6 12.8
105
BETTY 3
BETTY 2
BETTY 1
Head H (metres)
Flow rate Q
TYPE
Single-phase BETTY 1 BETTY 2 BETTY 3
POWER
kW HP
m3/h l/min
0 0 35 41 47
0.3 5 32 36 42
0.6 10 27 31 38
0.9 15 24 27 34
1.2 20 21 24 31
1.5 25 19 22 28.5
1.8 30 17 20 26
2.1 35 16 19 24
2.4 40 15 17 22
2.7 45 14 16 21.5
3.0 50 13 15 19
h1
DN1
DN2
f1 f n
PORTS
DN1 DN2
1 20
2 20
106
BETTYNOX 3
BETTYNOX 2
BETTYNOX 1
Head H
(metres)
Flow rate Q
TYPE
Single-phase BETTYNOX 1 BETTYNOX 2 BETTYNOX 3
POWER
kW HP
m3/h l/min
0 0 35 41 47
0.3 5 32 36 42
0.6 10 27 31 38
0.9 15 24 27 34
1.2 20 21 24 31
1.5 25 19 22 28.5
1.8 30 17 20 26
2.1 35 16 19 24
2.4 40 15 17 22
2.7 45 14 16 21.5
3.0 50 13 15 19
DN2
DN1
h1
f1 f n
PORTS
DN1 DN2
1 20
2 20
107
Stainless steel submersible pump with peripheral impeller and anti-seize system. Standard version includes 10 m power cable and integral capacitor for ease of installation.
RANGE OF PERFORMANCE Flow rate up to 50 l/min (3.0 m3/h) Head up to 68 m LIMITS OF USE Submersion depth up to 40 m Liquid temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
DELIVERY BODY: stainless steel AISI 304. IMPELLER HOUSING WITH PATENTED DOUBLE ANTI-SEIZE INSERTS. IMPELLER: brass, type with radial peripheral vanes. MOTOR JACKET: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MOTOR: asynchronous, dry rewindable stator, for continuous duty 4SKm: single-phase 220240 V - 50 Hz. INSULATION: class F. PROTEZIONE: IP 68. MECHANICAL SEAL: ceramic - graphite - NBR.
STANDARD FEATURES:
OPTIONS ON REQUEST
108
4SKm100E
Head H (metres)
Flow rate Q
TYPE
Single-phase 4SKm 100E
POWER
kW HP
m3/h l/min
0 0 68
0.3 5 62
0.6 10 55
0.9 15 49
1.2 20 43
1.5 25 37
1.8 30 30
2.1 35 24
2.4 40 17
3.0 50 5
0.75
H metres
The 4SK pump may be installed in boreholes with a diameter not less than 4 (100 mm). The electropump is lowered into the borehole by means of the delivery pipe to such a depth as to guarantee its complete immersion (min. 50 cm and at least one metre from the bottom). It is good practice to secure the pump by means of a stainless steel or nylon cable, connected to the anchoring points on the
delivery body.
PORT
DN
kg 13.1
1"
109
Submerged pumps with peripheral impeller and patented anti-seize system (guarantees pump operation even after long periods of inactivity).
RANGE OF PERFORMANCE Flow rate up to 80 l/min (4.8 m3/h) Head up to 77 m LIMITS OF USE Submersion depth up to 40 m Liquid temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
DELIVERY BODY: brass with double anti-seize inserts IMPELLER: brass, type with radial peripheral vanes. MOTOR JACKET: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MOTOR: asynchronous, for continuous duty, may be removed and rewound, in an oil bath. 5SKm: single-phase 220240 V - 50 Hz. INSULATION: class F. PROTECTION IP 68. MECHANICAL SEAL: stainless steel - graphite - NBR.
OPTIONS ON REQUEST
110
5SKm100
5SKm150
Head H (metres)
5SKm100M
Flow rate Q
TYPE
Single-phase 5SKm 100 5SKm 100M 5SKm 150
POWER
kW HP
m3/h l/min
0 0 77 42 53
0.3 5 70 40 50
0.9 15 57 35 45
1.2 20 50 32.5 42
1.5 25 43.5 30 39
1.8 30 37 27.5 37
2.1 35 30 25 34
2.4 40 23 22.5 31
3.0 50 10 17.5 26
3.6 60 13 21
4.2 70 8 15
4.8 80 3 10
1 1 1.5
H metres
DN
CONTROL BOX
5SK pumps may be installed in boreholes with a diameter not less than 5" (125 mm). The electropump is lowered into the borehole by means of the delivery pipe to such a depth as to guarantee its complete immersion (min. 50 cm and at least one metre from the bottom).
It is good practice to secure the pump by means of a stainless steel or nylon cable, fixed to the holes provided on the delivery body.
PORT
DN
11/4"
11/4"
11/4"
mm b 81 200 81
111
RANGE OF PERFORMANCE Flow rate up to 100 l/min (6 m3/h) Head up to 42 m LIMITS OF USE Submersion depth up to 10 m Liquid temperature up to + 40C Maximum sand content 50 g/m3 Emptying level up to 30 mm from the bottom CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY AND SUCTION GRID: glass filled technopolymer, particularly resistant to impact and corrosion, with threaded port ISO 228/1. IMPELLERS and DIFFUSERS: technopolymer. DIFFUSER CONTAINER: stainless steel AISI 304. MOTOR SUPPORT: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal ceramic -silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: asynchronous, for continuous duty. TOP MULTI: single-phase 220240 V - 50 Hz with capacitor and thermal overload protector. INSULATION: class F. PROTECTION: IP 68. REGISTERED MODEL n 72765.
OPTIONS ON REQUEST
112
TOP-MULTI 3
TOP-MULTI 1
TOP-MULTI 2
Head H (metres)
Flow rate Q
TYPE
Single-phase TOP - MULTI 1 TOP - MULTI 2 TOP - MULTI 3
POWER
kW HP
m3/h l/min
0 0 36 30 42
0.6 10 33 29 38
1.2 20 30.5 28 35
1.8 30 26.5 27 31
2.4 40 21.5 26 25
3.6 60 5 22 8
4.2 70 19
4.8 80 15
5.4 90 10.5
6.0 100 5
p minimum
h1 h
minimum
PORT
DN
N stages 6 5 7
kg e regolabile regolabile p 350 350 350 350 350 350 8.4 8.1 8.9
11/4"
11/4"
11/4"
113
The best combination of performance, reliability and quiet running, robust and easy to use.
RANGE OF PERFORMANCE Flow rate up to 80 l/min (4.8 m3/h) Head up to 105 m LIMITS OF USE Liquid temperature up to +40C Maximum sand content 50 g/m3 Submersion depth up to 20 m
CONSTRUCTION CHARACTERISTICS
CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
OUTER CASE AND MOTOR SUPPORT: stainless steel AISI 304 IMPELLERS AND DIFFUSERS: technopolymer. DIAPHRAGMS: stainless steel AISI 304, complete with anti-wear rings. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. SCREWS AND FILTER: stainless steel AISI 304. MOTOR: asynchronous for continuous duty. SUMOm 2: single-phase 220240 V - 50 Hz with thermal overload protector built into windings below 1.5 kW. The 1.8 kW motor has an external overload protector (with manual reset) incorporated into the control box. SUMO 2: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
SUMO 2
OPTIONS ON REQUEST
economy version 10 m power cable and capacitor, (without control box) single-phase pumps with external float switch (SUMOm 2...- GE) other voltages or frequency 60 Hz
114
SUMO2/18
SUMO2/15
Head H (metres)
SUMO2/11
SUMO2/7
SUMO2/6 SUMO2/5
Flow rate Q
TYPE
Single-phase Three-phase SUMOm 2/5 SUMOm 2/6 SUMOm 2/7 SUMO 2/7 SUMOm 2/11 SUMO 2/11 SUMOm 2/15 SUMO 2/15 SUMOm 2/18 SUMO 2/18
POWER
kW HP
m3/h l/min
0 0
0.6 10 35 46 58 72 87 102
1.2 20 33 44 55 70 83 98
1.8 30 31 41 51 66 78 92
2.4 40
2.7 45
3.0 50
3.3 55
3.6 60
3.9 65
4.2 70
4.5 75
4.8 80
28 26 25 23 22 20 18 16 14 37.5 35 34 31 29 26 23 19.5 16 47 44 42 38 36 32 28 23 18 61 58 55 52 48 44 40 35 30 73 70 66 62 58 53 48 44 38 85 82 78 73 68 63 57 50 45 Tolerance of the performance curves according to EN ISO 9906 App. A.
DN
TYPE Single-phase SUMOm 2/5 - GE SUMOm 2/6 - GE SUMOm 2/7 - GE SUMOm 2/11 - GE SUMOm 2/15 - GE SUMOm 2/18 - GE
TYPE Single-phase Three-phase SUMOm 2/5 SUMOm 2/6 SUMOm 2/7 SUMO 2/7 SUMOm 2/11 SUMO 2/11 SUMOm 2/15 SUMO 2/15 SUMOm 2/18 SUMO 2/18 PORT
DN
N stages 3 4 5 5 5 6 7
kg b 81 81 81 200 81 81 81 c 66 66 66 66 66 66 66 1~ 11.9 14.0 17.3 24.5 25.4 31.2 3~ 15.8 22.8 23.8 27.1
115
The perfect combination of performance, reliability and quiet running, robust and easy to use.
RANGE OF PERFORMANCE Flow rate up to 120 l/min (7.2 m3/h) Head up to 105 m LIMITS OF USE Liquid temperature up to +40C Maximum sand content 50 g/m3 Submersion depth up to 20 m
CONSTRUCTION CHARACTERISTICS
CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
OUTER CASE AND MOTOR SUPPORT: stainless steel AISI 304 IMPELLERS AND DIFFUSERS: technopolymer. DIAPHRAGMS: stainless steel AISI 304, complete with anti-wear rings. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. SCREWS AND FILTER: stainless steel AISI 304. MOTOR asynchronous for continuous duty. SUMOm 4: single-phase 220240 V - 50 Hz with thermal overload protector built into windings below 1.5 kW. The 1.8 kW motor has an external overload protector (with manual reset) incorporated into the control box. SUMO 4: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTEctION: IP 68.
SUMO 4
OPTIONS ON REQUEST
economy version 10 m power cable and capacitor, (without control box) single-phase pumps with external float switch (SUMOm 2...- GE) other voltages or frequency 60 Hz
116
SUMO4/22
SUMO4/18
Head H (metres)
SUMO4/15
Flow rate Q
TYPE
Single-phase SUMOm 4/5 SUMOm 4/6 SUMOm 4/7 SUMOm 4/11 SUMOm 4/15 SUMOm 4/18 SUMOm 4/22 Three-phase SUMO 4/7 SUMO 4/11 SUMO 4/15 SUMO 4/18 SUMO 4/22
POWER
kW HP
m3/h l/min
0 0
1.2 20 27 37 48 56 72 85 101
1.8 30 26 36 46 54 69 83 98
2.4 40 25 34.5 44 52 66 79 94
3.0 50 24 32.5 41 50 64 76 90
3.6 60 22.5 30 38 48 60 73 86
4.2 70 20.5 28 35 46 57 68 80
4.8 80 18 25 32 43 53 64 75
7.2 120 7 10 14 24 32 38 44
TYPE Single-phase SUMOm 4/5 - GE SUMOm 4/6 - GE SUMOm 4/7 - GE SUMOm 4/11 - GE SUMOm 4/15 - GE SUMOm 4/18 - GE SUMOm 4/22 - GE
TYPE Single-phase Three-phase SUMOm 4/5 SUMOm 4/6 SUMOm 4/7 SUMOm 4/11 SUMOm 4/15 SUMOm 4/18 SUMOm 4/22 SUMO 4/7 SUMO 4/11 SUMO 4/15 SUMO 4/18 SUMO 4/22 PORT
DN
N stages 3 4 5 4 5 6 7
kg b 81 81 81 200 81 81 81 c 66 66 66 66 66 66 66 1~ 11.9 14.0 17.3 23.4 24.5 25.4 31.0 3~ 15.8 21.4 22.8 23.8 27.1
117
Robust vertical multi-stage pumps in stainless steel, distinguished by their high efficiency and particularly quiet operation.
RANGE OF PERFORMANCE Flow rate up to 80 l/min (4.8 m3/h) Head up to 105 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
OUTER CASE AND MOTOR SUPPORT: stainless steel AISI 304 case with threaded ports ISO 228-1. IMPELLERS AND DIFFUSERS: technopolymer. DIAPHRAGMS: stainless steel AISI 304, complete with anti-wear rings. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. SCREWS: stainless steel AISI 304. MOTOR: electric, asynchronous for continuous duty. VLm 2: single-phase 220240 V - 50 Hz with thermal overload protector built into windings below 1.5 kW. The 1.8 kW motor has an external (with manual reset) incorporated into the control box. VL 2: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
VL 2
OPTIONS ON REQUEST
118
VL2/18
VL2/15
Head H (metres)
VL2/11
Flow rate Q
TYPE
Single-phase VLm 2/5 VLm 2/6 VLm 2/7 VLm 2/11 VLm 2/15 VLm 2/18 Three-phase VL 2/7 VL 2/11 VL 2/15 VL 2/18
POWER
kW HP
m3/h l/min
0 0
0.6 10 35 46 58 72 87 102
1.2 20 33 44 55 70 83 98
1.8 30 31 41 51 66 78 92
2.4 40
2.7 45
3.0 50
3.3 55
3.6 60
3.9 65
4.2 70
4.5 75
4.8 80
28 26 25 23 22 20 18 16 14 37.5 35 34 31 29 26 23 19.5 16 47 44 42 38 36 32 28 23 18 61 58 55 52 48 44 40 35 30 73 70 66 62 58 53 48 44 38 85 82 78 73 68 63 57 50 45 Tolerance of the performance curves according to EN ISO 9906 App. A.
a
DN2
d
DN1
w1 n TYPE Single-phase Three-phase VLm 2/5 VLm 2/6 VLm 2/7 VL 2/7 VLm 2/11 VL 2/11 VLm 2/15 VL 2/15 VLm 2/18 VL 2/18 PORTS
DN1 DN2
s w1
w2 f
w2
11/4"
11/4"
11/4"
11/4" 11/2"
11/2"
11/2"
11/4"
N stages 3 4 5 5 5 6 7
c 81 81 81 200 81 81 81
d 66 66 66 66 66 66 66
DIMENSIONS f h 223 432 223 506 223 530 223 223 603 223 633 223 708
mm h1 50 50 50 60 60 60
h1
h2
kg h2 382 456 480 543 573 648 n 183 183 183 183 183 183 183 w1 62 62 62 62 62 62 62 w2 88.5 88.5 88.5 88.5 88.5 88.5 88.5 s 11 11 11 11 11 11 11 1~ 10.9 13.0 16.3 24.1 25.0 30.8 3~ 14.8 22.4 23.4 26.7
119
Robust vertical multi-stage pumps in stainless steel, distinguished by their high efficiency and particularly quiet operation.
RANGE OF PERFORMANCE Flow rate up to 120 l/min (7.2 m3/h) Head up to 105 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
OUTER CASE AND MOTOR SUPPORT: stainless steel AISI 304 case with threaded ports ISO 228-1. IMPELLERS AND DIFFUSERS: technopolymer. DIAPHRAGMS: stainless steel AISI 304, complete with anti-wear rings. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. SCREWS: stainless steel AISI 304. MOTOR: electric, asynchronous for continuous duty. VLm 4: single-phase 220240 V - 50 Hz with thermal overload protector built into windings below 1.5 kW. The 1.8 kW motor has an external overload protector (with manual reset) incorporated into the control box. VL 4: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
VL 4
OPTIONS ON REQUEST
120
VL4/22
VL4/18
Head H (metres)
VL4/15
Flow rate Q
TYPE
Single-phase VLm 4/5 VLm 4/6 VLm 4/7 VLm 4/11 VLm 4/15 VLm 4/18 VLm 4/22 Three-phase VL 4/7 VL 4/11 VL 4/15 VL 4/18 VL 4/22
POWER
kW HP
m3/h l/min
0 0
1.2 20 27 37 48 56 72 85 101
1.8 30 26 36 46 54 69 83 98
2.4 40 25 34.5 44 52 66 79 94
3.0 50 24 32.5 41 50 64 76 90
3.6 60 22.5 30 38 48 60 73 86
4.2 70 20.5 28 35 46 57 68 80
4.8 80 18 25 32 43 53 64 75
7.2 120 7 10 14 24 32 38 44
a
DN2
d
DN1
w1 n TYPE Single-phase Three-phase VLm 4/5 VLm 4/6 VLm 4/7 VL 4/7 VLm 4/11 VL 4/11 VLm 4/15 VL 4/15 VLm 4/18 VL 4/18 VLm 4/22 VL 4/22 PORTS
DN1
s w1 DIMENSIONS f h 223 432 223 506 223 530 223 573 223 603 223 633 223 708 mm h1 50 50 50 60 60 60 60 60
w2 f
w2
11/4"
11/4"
11/4" 11/2" 11/2" 11/2" 11/2" 11/2"
N DN2 stages 11/4" 3 111/4" 1/4" 4 11/4" 5 4 11/4"" 1/4 11/4" 5 11/4" " 1/4 1 6 11/4" 7
h1
h2
kg h2 382 456 480 513 543 573 648 n 183 183 183 183 183 183 183 w1 62 62 62 62 62 62 62 w2 88.5 88.5 88.5 88.5 88.5 88.5 88.5 s 11 11 11 11 11 11 11 1~ 10.9 13.0 16.3 23.0 24.1 25.0 30.7 3~ 14.8 21.0 22.4 23.4 26.7
c 81 81 81 200 81 81 81
d 66 66 66 66 66 66 66
121
Compact multi-stage pumps, in stainless steel, with suction and delivery ports in line. They can be installed in a horizontal or vertical position, or completely submerged. The enclosed design also eliminates any possibility of water escaping.
RANGE OF PERFORMANCE Maximum flow rate 80 l/min (4.8 m3/h) Head up to 105 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
OUTER CASE AND MOTOR SUPPORT: stainless steel AISI 304 case with threaded ports ISO 228-1. IMPELLERS AND DIFFUSORS: technopolymer. DIAPHRAGMS: stainless steel AISI 304, complete with anti-wear rings. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. SCREWS: stainless steel AISI 304. MOTOR: electric, asynchronous for continuous duty. VLEm 2: single-phase 220240 V - 50 Hz with thermal overload protector built into windings below 1.5 kW. The 1.8 kW motor has an external overload protector (with manual reset) incorporated into the control box. VLE 2: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
VLE 2
OPTIONS ON REQUEST
122
VLE2/18
VLE2/15
Head H (metres)
VLE2/11
VLE2/7
VLE2/6
VLE2/5
Flow rate Q
TYPE
Single-phase VLEm 2/5 VLEm 2/6 VLEm 2/7 VLEm 2/11 VLEm 2/15 VLEm 2/18 Three-phase VLE 2/7 VLE 2/11 VLE 2/15 VLE 2/18
POWER
kW HP
m3/h l/min
0 0
0.6 10 35 46 58 72 87 102
1.2 20 33 44 55 70 83 98
1.8 30 31 41 51 66 78 92
2.4 40
2.7 45
3.0 50
3.3 55
3.6 60
3.9 65
4.2 70
4.5 75
4.8 80
28 26 25 23 22 20 18 16 14 37.5 35 34 31 29 26 23 19.5 16 47 44 42 38 36 32 28 23 18 61 58 55 52 48 44 40 35 30 73 70 66 62 58 53 48 44 38 85 82 78 73 68 63 57 50 45 Tolerance of the performance curves according to EN ISO 9906 App. A.
Horizontal installation
DN2
DN1
TYPE Single-phase Three-phase VLEm 2/5 VLEm 2/6 VLEm 2/7 VLE 2/7 VLEm 2/11 VLE 2/11 VLEm 2/15 VLE 2/15 VLEm 2/18 VLE 2/18 PORTS
DN
11/4" 11/4"
11/4" 11/4"
11/4" 11/4" 11/4"
N stages 3 4 5 5 5 6 7
kg b c 1~ 8.4 10.5 13.8 20.6 21.5 27.3 3~ 12.3 18.9 19.9 23.2
200
66
DN1
123
Compact multi-stage pumps in stainless steel, with suction and delivery ports in line. They can be installed in a horizontal or vertical position or when completely submerged. The enclosed design also eliminates any possibility of water escaping.
RANGE OF PERFORMANCE Flow rate up to 120 l/min (7.2 m3/h) Head up to 105 m LIMITS OF USE Manometric suction lift up to 7 m Liquid temperature up to + 40C CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
OUTER CASE AND MOTOR SUPPORT: stainless steel AISI 304 case with threaded ports ISO 228-1. IMPELLERS AND DIFFUSERS: technopolymer. DIAPHRAGMS: stainless steel AISI 304, complete with anti-wear rings. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. SCREWS: stainless steel AISI 304. MOTOR: electric, asynchronous for continuous duty. VLm 4: single-phase 220240V - 50 Hz with thermal overload protector built into windings below 1.5 kW. The 1.8 kW motor has an external overload protector (with manual reset) incorporated into the control box. VL 4: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
VL 4
OPTIONS ON REQUEST
124
VLE4/22
VLE4/18
Head H (metres)
VLE4/15
Flow rate Q
TYPE
Single-phase VLEm 4/5 VLEm 4/6 VLEm 4/7 VLEm 4/11 VLEm 4/15 VLEm 4/18 VLEm 4/22 Three-phase VLE 4/7 VLE 4/11 VLE 4/15 VLE 4/18 VLE 4/22
POWER
kW HP
m3/h l/min
0 0
1.2 20 27 37 48 56 72 85 101
1.8 30 26 36 46 54 69 83 98
2.4 40
3.0 50
3.6 60
4.2 70
4.8 80
5.4 90
6.0 100
6.6 110
7.2 120
25 24 22.5 20.5 18 15.5 13 10 7 34.5 32.5 30 28 25 21.5 18.5 14.5 10 44 41 38 35 32 28 24 19 14 52 50 48 46 43 39 36 31 24 66 64 60 57 53 48 43 38 32 79 76 73 68 64 58 52 44 38 94 90 86 80 75 67 60 52 44 Tolerance of the performance curves according to EN ISO 9906 App. A.
Horizontal installation
DN2
DN1
TYPE Single-phase Three-phase VLEm 4/5 VLEm 4/6 VLEm 4/7 VLE 4/7 VLEm 4/11 VLE 4/11 VLEm 4/15 VLE 4/15 VLEm 4/18 VLE 4/18 VLEm 4/22 VLE 4/22 PORTS
DN
11/4"
11/4" 11/4" 11/4"
N stages 3 4 5 4 5 6 7
kg b c 1~ 8.4 10.5 13.8 19.5 20.6 21.5 27.2 3~ 12.3 17.5 18.9 19.9 23.2
200
66
DN1
125
4 monoblock submersible pumps designed as a more economic alternative to traditional borehole pumps without loss of performance and reliability. Supplied with integral capacitor and 20 m power cable for ease of installation.
RANGE OF PERFORMANCE Flow rate up to 150 l/min (9 m3/h) Head up to 135 m LIMITS OF USE Liquid temperature up to +30C Maximum sand content 150 g/m3 Submersion depth up to 40 m CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: stainless steel AISI 304 with threaded port ISO 228-1. CASE: stainless steel AISI 304. IMPELLERS AND DIFFUSERS: technopolymer. DIFFUSER HOUSING: stainless steel AISI 304. PUMP SHAFT: stainless steel AISI 304. PUMP BEARINGS: housing in special technopolymer with stainless steel AISI 316 shaft bushes, chrome oxide coated to resist sand. DRIVE COUPLING: stainless steel AISI 316L. SCREWS AND CABLE COVER: stainless steel AISI 304. MOTOR SHAFT: stainless steel AISI 316 (EN 10088-3 - 1.4104 up to 0.75 kW). MOTOR: submersible for continuous duty (dry rewindable). 4BLOCKm: single-phase 220240 V - 50 Hz. 4BLOCK: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68. CHECK VALVE: built into the delivery body. DOUBLE SEAL: mechanical seal ceramic - graphite - NBR with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
STANDARD FEATURES: 4BLOCKm (single-phase) Motor thermal protection built into the winding.
Internal capacitor. 20 metre flat power cable.
OPTIONS ON REQUEST
126
=54% 4BLOCK2/20
45
4BLOCK2/13
Head H (metres)
4BLOCK2/10
26
Flow rate Q
TYPE
Single-phase 4BLOCKm 2/10 4BLOCKm 2/13 4BLOCKm 2/20 Three-phase 4BLOCK 2/10 4BLOCK 2/13 4BLOCK 2/20
POWER
kW HP
m3/h l/min
0 0 70 90 135
0.6 10 68 88 130
1.2 20 63 82 122
1.8 30 57 74 111
2.4 40 48 62 93
3.0 50 36 46 71
3.6 60 20 26 39
DN
Typical installation
min 1 metre
TYPE Single-phase Three-phase 4BLOCKm 2/10 4BLOCK 2/10 4BLOCKm 2/13 4BLOCK 2/13 4BLOCKm 2/20 4BLOCK 2/20
PORTS
DN
11/4"
11/4"
11/4"
N stages 10 13 20
DIMENSIONS mm 99.5
127
4BLOCK4/18
=61%
50
4BLOCK4/14
Head H (metres)
35
4BLOCK4/9 4BLOCK4/7
Flow rate Q
TYPE
Single-phase Three-phase 4BLOCKm 4/7 4BLOCK 4/7 4BLOCKm 4/9 4BLOCK 4/9 4BLOCKm 4/14 4BLOCK 4/14 4BLOCK 4/18
POWER
kW HP
m3/h l/min
0 0 46 60 92 120
1.2 20 44 56 88 112
2.4 40 40 52 81 104
3.0 50 38 49 76 98
3.6 60 35 45 70 90
4.8 80 27 35 54.5 70
5.4 90 23 29 45 58
6.0 100 17 23 35 45
DN
Typical installation
min 1 metre
TYPE Single-phase Three-phase 4BLOCKm 4/7 4BLOCK 4/7 4BLOCKm 4/9 4BLOCK 4/9 4BLOCKm 4/14 4BLOCK 4/14 4BLOCK 4/18
PORTS
DN
N stages 7 9 14 18
kg h 663/638 732/707 901/841 /1014 1~ 9.9 11.3 14.3 3~ 8.7 10.2 11.9 15.0
128
=65% 4BLOCK6/13
55
50
4BLOCK6/9
Head H (metres)
4BLOCK6/6
4BLOCK6/4
Flow rate Q
TYPE
Single-phase 4BLOCKm 6/4 4BLOCKm 6/6 4BLOCKm 6/9 Three-phase 4BLOCK 6/4 4BLOCK 6/6 4BLOCK 6/9 4BLOCK 6/13
POWER
kW HP
m3/h l/min
0 0 27 40 61 87
1.5 25 26 38 58 83
3.0 50 24 36 54 78
4.5 75 22 33 50 71
6.0 100 19 29 44 61
7.5 125 15 24 35 49
9.0 150 11 17 26 35
DN
Typical installation
min 1 metre
TYPE Single-phase Three-phase 4BLOCKm 6/4 4BLOCK 6/4 4BLOCKm 6/6 4BLOCK 6/6 4BLOCKm 6/9 4BLOCK 6/9 4BLOCK 6/13
PORTS
DN
N stages 4 6 9 13
kg h 629/604 714/689 864/804 /1008 1~ 9.7 11.3 13.9 3~ 8.5 10.2 11.5 15.4
129
The combination of a hydraulic design with floating impellers and the materials used allows the pump to handle sand content of up to 150 g/m3 without risk of blockage or premature wear.
RANGE OF PERFORMANCE Flow rate up to 375 l/min (22.5 m3/h) Head up to 525 m LIMITS OF USE Liquid temperature up to +30C Maximum sand content 150 g/m3 Starts/hour: 20 at regular intervals CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY AND MOTOR BRACKET: stainless steel AISI 304. NON-RETURN VALVE: stainless steel AISI 304. IMPELLERS AND DIFFUSERS: technopolymer. DIFFUSER HOUSING: stainless steel AISI 304. PUMP CASING: stainless steel AISI 304. PUMP SHAFT: stainless steel AISI 304. PUMP BEARINGS: housing in special technopolymer with stainless steel AISI 316 shaft bushes, chrome oxide coated to resist sand. DRIVE COUPLING: stainless steel AISI 316L up to 2.2 kW; stainless steel AISI 304 for higher powers. SCREWS, FILTER AND CABLE COVER: stainless steel AISI 304. MOTOR: Pedrollo 4" submersible electric motor. 4SRm: single-phase220230 V - 50 Hz. 4SR: three-phase380415 V - 50 Hz. PROTECTION: IP 68.
STANDARD FEATURES: 4SRm 4SRm (single-phase) Power cable 1.5 metres long (2.5 metres for motors
over 3 kW). Capacitor supplied loose with Pedrollo motors.
4SR
(three-phase) Power cable 1.5 metres long (2.5 metres for powers higher than 3 kW).
OPTIONS ON REQUEST
pumps for water with a sand content higher than 150 g/m3 pumps for sea water Franklin Electric 4" submersible electric motor other voltages or frequency 60 Hz
130
100
50
Head H (metres)
40 30 20
10
Flow rate Q
DESCRIPTION
Borehole diameter in inches Series Flow rate in m3/h in the point of highest efficiency Single-phase motor Number of stages
4 SR 1 m / 13
131
=43% 4SR1/64
35
32
4SR1/45
Head H (metres)
4SR1/35
4SR1/25
4SR1/18
4SR1/13
4SR1/8
Flow rate Q
TYPE
Single-phase 4SR1m/8 4SR1m/13 4SR1m/18 4SR1m/25 4SR1m/35 4SR1m/45 4SR1m/64 Three-phase 4SR1/13 4SR1/18 4SR1/25 4SR1/35 4SR1/45 4SR1/64
POWER
kW HP Q
m3/h l/min
1.8 30 16 26 36 50 70 90 128
132
4SR1.5/60
=48% =48%
4SR1.5/46
31
28
Head H (metres)
4SR1.5/32
4SR1.5/25
4SR1.5/17
4SR1.5/13
4SR1.5/8 4SR1.5/6
Flow rate Q
TYPE
Single-phase 4SR1.5m/6 4SR1.5m/8 4SR1.5m/13 4SR1.5m/17 4SR1.5m/25 4SR1.5m/32 4SR1.5m/46 Three-phase 4SR1.5/8 4SR1.5/13 4SR1.5/17 4SR1.5/25 4SR1.5/32 4SR1.5/46 4SR1.5/60
POWER
kW HP Q
m3/h l/min
2.7 45 11 14 23 30 45 58 83 108
133
4SR2/70
=54%
4SR2/50
45
Head H (metres)
4SR2/39
26
4SR2/27
4SR2/20
Flow rate Q
TYPE
Single-phase 4SR2m/7 4SR2m/10 4SR2m/13 4SR2m/20 4SR2m/27 4SR2m/39 Three-phase 4SR2/7 4SR2/10 4SR2/13 4SR2/20 4SR2/27 4SR2/39 4SR2/50 4SR2/70
POWER
kW HP Q
m3/h l/min
3.6 60 14 20 26 39 52 75 96 135
134
4SR4/78
=61%
4SR4/60
50
Head H (metres)
4SR4/46
35
4SR4/35
4SR4/26
Flow rate Q
TYPE
Single-phase 4SR4m/7 4SR4m/9 4SR4m/14 4SR4m/18 4SR4m/26 Three-phase 4SR4/7 4SR4/9 4SR4/14 4SR4/18 4SR4/26 4SR4/35 4SR4/46 4SR4/60 4SR4/78
POWER
kW HP Q
m3/h l/min
135
4SR6/56
=65%
55
4SR6/42
50
Head H (metres)
4SR6/31
4SR6/23
4SR6/17
Flow rate Q
TYPE
Single-phase 4SR6m/4 4SR6m/6 4SR6m/9 4SR6m/13 4SR6m/17 Three-phase 4SR6/4 4SR6/6 4SR6/9 4SR6/13 4SR6/17 4SR6/23 4SR6/31 4SR6/42 4SR6/56
POWER
kW HP Q
m3/h l/min
136
=65% 4SR8/42
50
4SR8/31
Head H (metres)
4SR8/23
35
4SR8/17
4SR8/13
Flow rate Q
TYPE
Single-phase 4SR8m/4 4SR8m/7 4SR8m/9 4SR8m/13 Three-phase 4SR8/4 4SR8/7 4SR8/9 4SR8/13 4SR8/17 4SR8/23 4SR8/31 4SR8/42
POWER
kW HP Q
m3/h l/min
12.0 200 10 16 21 30 40 53 72 98
H metres
137
4SR10/35
=63%
4SR10/26
44
40
Head H (metres)
4SR10/20
4SR10/15
4SR10/10
4SR10/7 4SR10/5
Flow rate Q
TYPE
Single-phase 4SR10m/5 4SR10m/7 4SR10m/10 Three-phase 4SR10/5 4SR10/7 4SR10/10 4SR10/15 4SR10/20 4SR10/26 4SR10/35
POWER
kW HP Q
m3/h l/min
12 200 18 25 36 53 71 94 126
15.0 250 10 15 20 30 40 52 70
H metres
138
=58%
4SR12/29
45
4SR12/22
40
Head H (metres)
4SR12/16
4SR12/12
4SR12/9
4SR12/6 4SR12/4
Flow rate Q
TYPE
Single-phase 4SR12m/4 4SR12m/6 4SR12m/9 Three-phase 4SR12/4 4SR12/6 4SR12/9 4SR12/12 4SR12/16 4SR12/22 4SR12/29
POWER
kW HP Q
m3/h l/min
6.0 100
9.0 150
12.0 200
13.2 220
14.4 240
15.6 260
16.8 280
18.0 300
H metres
22 19 16 15 14 12 11 8 35 32 28 26 24 21 18 14 52 48 42 39 36 32 27 22 69 64 56 52 48 43 36 29 93 86 75 70 64 57 48 38 127 118 103 96 88 78 66 53 167 155 135 126 116 103 88 71 Tolerance of the performance curves according to EN ISO 9906 App. A.
139
4SR15/24
=53%
4SR15/18
40
36
Head H (metres)
4SR15/13
4SR15/10
4SR15/7
4SR15/5
Flow rate Q
TYPE
Single-phase 4SR15m/5 4SR15m/7 Three-phase 4SR15/5 4SR15/7 4SR15/10 4SR15/13 4SR15/18 4SR15/24
POWER
kW HP Q
m3/h l/min
0 0 31 44 62 80 112 150
15.0 250 20 27 38 50 71 95
18.0 300 15 20 30 40 55 75
21.0 350 10 13 20 25 37 50
2 3 4 5.5 7.5 10
H metres
140
DN
h1
TYPE
Three-phase
PORT
DN
DIMENSIONS mm h1 h2
402 519 648 858 1065 1516 310 402 501 648 802 1134 1442 291 347 402 556 685 931 1208 1626 316 360 470 582 758 980 1295 1652 2097 282 342 432 577 696 901 1165 1519 2063 282 372 432 577 696 901 1165 1519 417 519 710 1002 1257 1600 2096 366 470 659 811 1053 1358 1752 422 526 720 875 1173 1522 294 294 319 344 404 454 294 294 319 344 404 454 560 294 294 319 344 404 454 560 660 294 319 344 404 454 560 660 745 850 294 319 344 404 454 560 660 745 850 319 344 404 454 560 660 745 850 344 404 454 560 660 745 850 344 404 454 560 660 745 850 404 454 560 660 745 850
h
696 813 967 1202 1469 1970 604 696 820 992 1206 1588 2002 585 641 721 900 1089 1385 1768 2286 610 679 814 986 1212 1540 1955 2397 2947 576 661 776 981 1150 1461 1825 2264 2913 601 716 836 1031 1256 1561 1910 2369 761 923 1164 1562 1917 2345 2946 710 874 1113 1371 1713 2103 2602 826 980 1280 1535 1918 2372
kg 3~
11.1 12.1 14.7 19.4 23.4 30.7 11.6 13.5 15.4 18.3 21.5 26.7 32.4 11.4 12.9 14.5 17.3 20.4 25.2 25.0 25.0 12.5 14.0 16.3 19.1 23.0 26.8 33.9 41.5 56.8 12.1 13.6 15.7 18.6 21.9 25.3 33.6 38.1 47.0 13.1 15.1 17.4 20.8 23.4 24.5 37.2 44.2 15.4 17.9 21.6 25.6 33.9 38.1 53.0 15.0 17.5 21.2 24.1 33.2 38.4 46.5 17.0 20.8 23.1 30.0 36.5 43.0
TYPE
Single-phase
PORT
DN
DIMENSIONS mm h1 h2
310 402 519 648 858 1065 1516 273 310 402 501 648 802 1134 291 347 402 556 685 931 316 360 470 582 758 282 342 432 577 696 282 372 432 577 417 519 710 366 470 659 422 526 294 294 319 344 404 454 600 294 294 319 344 404 454 600 294 319 344 404 454 600 319 344 404 454 600 319 344 404 454 600 344 404 454 600 404 454 600 404 454 600 454 600
h
604 696 838 992 1262 1519 2116 567 604 721 845 1052 1256 1734 585 666 746 960 1139 1531 635 704 874 1036 1358 601 686 836 1031 1296 626 776 886 1177 821 973 1310 770 924 1259 876 1126
kg 1~
9.3 11.1 13.3 15.8 21.8 25.6 35.4 9.0 12.6 14.5 16.7 20.0 23.7 31.4 12.4 13.2 15.8 19.0 22.6 29.9 13.5 15.3 18.0 21.3 27.7 13.1 14.9 17.4 20.8 26.6 14.4 16.8 19.6 25.5 17.1 20.1 26.3 16.7 19.7 25.9 19.2 25.5
4SR1m/8 - PD 4SR1m/13 - PD 4SR1m/18 - PD 4SR1m/25 - PD 4SR1m/35 - PD 4SR1m/45 - PD 4SR1m/64 - PD 4SR1.5m/6 - PD 4SR1.5m/8 - PD 4SR1.5m/13 - PD 4SR1.5m/17 - PD 4SR1.5m/25 - PD 4SR1.5m/32 - PD 4SR1.5m/46 - PD 4SR2m/7 - PD 4SR2m/10 - PD 4SR2m/13 - PD 4SR2m/20 - PD 4SR2m/27 - PD 4SR2m/39 - PD 4SR4m/7 - PD 4SR4m/9 - PD 4SR4m/14 - PD 4SR4m/18 - PD 4SR4m/26 - PD 4SR6m/4 - PD 4SR6m/6 - PD 4SR6m/9 - PD 4SR6m/13 - PD 4SR6m/17 - PD 4SR8m/4 - PD 4SR8m/7 - PD 4SR8m/9 - PD 4SR8m/13 - PD 4SR10m/5 - PD 4SR10m/7 - PD 4SR10m/10 - PD 4SR12m/4 - PD 4SR12m/6 - PD 4SR12m/9 - PD 4SR15m/5 - PD 4SR15m/7 - PD
11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2"
98
4SR1/13 4SR1/18 4SR1/25 4SR1/35 4SR1/45 4SR1/64 4SR1.5/8 4SR1.5/13 4SR1.5/17 4SR1.5/25 4SR1.5/32 4SR1.5/46 4SR1.5/60 4SR2/7 4SR2/10 4SR2/13 4SR2/20 4SR2/27 4SR2/39 4SR2/50 4SR2/70 4SR4/7 4SR4/9 4SR4/14 4SR4/18 4SR4/26 4SR4/35 4SR4/46 4SR4/60 4SR4/78 4SR6/4 4SR6/6 4SR6/9 4SR6/13 4SR6/17 4SR6/23 4SR6/31 4SR6/42 4SR6/56 4SR8/4 4SR8/7 4SR8/9 4SR8/13 4SR8/17 4SR8/23 4SR8/31 4SR8/42 4SR10/5 4SR10/7 4SR10/10 4SR10/15 4SR10/20 4SR10/26 4SR10/35 4SR12/4 4SR12/6 4SR12/9 4SR12/12 4SR12/16 4SR12/22 4SR12/29 4SR15/5 4SR15/7 4SR15/10 4SR15/13 4SR15/18 4SR15/24
- PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD - PD
11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2"
h2
98
141
DN
h1
TYPE
Trefazor
PORT
DN
DIMENSIONS mm h1 h2
402 519 648 858 1065 1516 310 402 501 648 802 1134 1442 291 347 402 556 685 931 1208 1626 316 360 470 582 758 980 1295 1652 2097 282 342 432 577 696 901 1165 1519 2063 282 372 432 577 696 901 1165 1519 417 519 710 1002 1257 1600 2096 366 470 659 811 1053 1358 1752 422 526 720 875 1173 1522 223 242 271 299 327 356 223 242 271 299 327 356 423 223 242 271 299 327 356 423 584 242 271 299 327 356 423 584 698 774 242 271 299 327 356 423 584 698 774 271 299 327 356 423 584 698 774 299 327 356 423 584 698 774 299 327 356 423 584 698 774 327 356 423 584 698 774
h
625 761 919 1157 1392 1872 533 644 772 947 1129 1490 1865 514 589 673 855 1012 1287 1631 2210 558 631 769 909 1114 1403 1879 2350 2871 524 613 731 904 1052 1324 1749 2217 2837 553 671 759 933 1119 1485 1863 2293 716 846 1066 1425 1841 2298 2870 665 797 1015 1234 1637 2056 2526 749 882 1143 1459 1871 2296
kg 3~
11.7 13.6 16.2 21.2 24.0 30.5 11.3 13.0 15.2 18.3 20.9 26.5 32.8 11.1 12.5 14.3 17.2 20.4 23.8 22.8 22.8 12.1 13.8 16.2 18.5 21.6 26.9 36.5 45.8 59.8 11.6 13.4 15.5 18.0 20.5 25.4 33.4 42.5 47.2 12.9 15.0 16.8 19.4 23.5 31.0 38.9 47.2 15.2 17.3 20.2 25.7 33.7 42.5 56.0 14.8 16.9 19.8 24.2 31.8 40.1 48.4 16.4 18.7 23.2 30.2 38.2 46.0
TYPE
Single-phase
PORT
DN
DIMENSIONS mm h1 h2
310 402 519 648 858 1065 1516 273 310 402 501 648 802 1134 291 347 402 556 685 931 316 360 470 582 758 282 342 432 577 696 282 372 432 577 417 519 710 366 470 659 422 526 223 242 271 299 327 356 461 223 242 271 299 327 356 461 242 271 299 327 356 461 271 299 327 356 461 271 299 327 356 461 299 327 356 461 327 356 461 327 356 461 356 461
h
533 644 790 947 1185 1421 1977 496 552 673 800 975 1158 1595 533 618 701 883 1041 1392 587 659 797 938 1219 553 641 759 933 1157 581 699 788 1038 744 875 1171 693 826 1120 778 987
kg 1~
11.2 13.0 15.3 18.1 23.0 25.9 35.6 10.9 12.1 14.2 16.6 19.9 23.3 31.6 11.9 13.6 15.7 19.8 21.5 28.9 13.2 15.2 18.8 20.9 26.7 12.8 14.8 18.2 20.4 25.6 14.3 17.6 19.2 25.6 17.9 19.7 25.3 17.5 19.3 24.9 18.8 23.8
4SR1m/8 - FK 4SR1m/13 - FK 4SR1m/18 - FK 4SR1m/25 - FK 4SR1m/35 - FK 4SR1m/45 - FK 4SR1m/64 - FK 4SR1.5m/6 - FK 4SR1.5m/8 - FK 4SR1.5m/13 - FK 4SR1.5m/17 - FK 4SR1.5m/25 - FK 4SR1.5m/32 - FK 4SR1.5m/46 - FK 4SR2m/7 - FK 4SR2m/10 - FK 4SR2m/13 - FK 4SR2m/20 - FK 4SR2m/27 - FK 4SR2m/39 - FK 4SR4m/7 - FK 4SR4m/9 - FK 4SR4m/14 - FK 4SR4m/18 - FK 4SR4m/26 - FK 4SR6m/4 - FK 4SR6m/6 - FK 4SR6m/9 - FK 4SR6m/13 - FK 4SR6m/17 - FK 4SR8m/4 - FK 4SR8m/7 - FK 4SR8m/9 - FK 4SR8m/13 - FK 4SR10m/5 - FK 4SR10m/7 - FK 4SR10m/10 - FK 4SR12m/4 - FK 4SR12m/6 - FK 4SR12m/9 - FK 4SR15m/5 - FK 4SR15m/7 - FK
11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 1/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2"
98
4SR1/13 4SR1/18 4SR1/25 4SR1/35 4SR1/45 4SR1/64 4SR1.5/8 4SR1.5/13 4SR1.5/17 4SR1.5/25 4SR1.5/32 4SR1.5/46 4SR1.5/60 4SR2/7 4SR2/10 4SR2/13 4SR2/20 4SR2/27 4SR2/39 4SR2/50 4SR2/70 4SR4/7 4SR4/9 4SR4/14 4SR4/18 4SR4/26 4SR4/35 4SR4/46 4SR4/60 4SR4/78 4SR6/4 4SR6/6 4SR6/9 4SR6/13 4SR6/17 4SR6/23 4SR6/31 4SR6/42 4SR6/56 4SR8/4 4SR8/7 4SR8/9 4SR8/13 4SR8/17 4SR8/23 4SR8/31 4SR8/42 4SR10/5 4SR10/7 4SR10/10 4SR10/15 4SR10/20 4SR10/26 4SR10/35 4SR12/4 4SR12/6 4SR12/9 4SR12/12 4SR12/16 4SR12/22 4SR12/29 4SR15/5 4SR15/7 4SR15/10 4SR15/13 4SR15/18 4SR15/24
- FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK - FK
11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2"
h2
98
142
EXAMPLES OF INSTALLATION
12 9 5 7 8 4 6 6 4
STATIC LEVEL
10
11
DYNAMIC LEVEL
2 3
min 1 metre
min 1 metre
1) 2) 3) 4) 5) 6)
4SR submersible pump Clamps for securing the power cable Level control probes for dry run protection Anchorage of the pump support cables to the cover of the borehole Pressure gauge Non return valve
Flow rate regulating gate valve Electric power cable Control panel with level probes Pressure vessel Pressure switch Electrovalve/electrocompressor
4SR pumps may be installed in boreholes with a diameter not less than 4 (100 mm). The pump is lowered into the borehole by means of the delivery pipe to such a depth as to guarantee its complete immersion (min. 50 cm and at least one metre from the bottom of the borehole) even during operation, when a lowering of the level of liquid in the borehole may occur. When the pump is installed in a borehole, it is recommended to secure it with a stainless steel or nylon cable, connected to the holes provided on the delivery body.
143
Innovative mechanical and fluid-dymanic design has produced the new 6SR, manufactured in selected materials for the best combination of reliability, performance and durability. The glass reinforced technopolymer impeller is covered in a specially developed rubber within a sturdy stainless steel housing for maximum resistance to erosion and corrosion.
RANGE OF PERFORMANCE Flow rate up to 1000 l/min (60 m3/h) Head up to 390 m LIMITS OF USE Liquid temperature up to +30C Sand content up to 100 g/m3 Starts/hour: 20 at regular intervals CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
THEY ARE RECOMMENDED FOR PUMPING CLEAN WATER WITH A SAND CONTENT NO HIGHER THAN 100 g/m3. THEIR HIGH EFFICIENCY AND RELIABILITY MAKE THEM SUITABLE FOR USE IN THE DOMESTIC, CIVIL AND INDUSTRIAL SECTORS, INCLUDING FOR WATER SUPPLIES AS PART OF A PRESSURE SET, IRRIGATION, WASHDOWN SYSTEMS, PRESSURE BOOSTING AND FIRE FIGHTING SYSTEMS.
NON-RETURN VALVE: stainless steel AISI 304. IMPELLERS: glass filled technopolymer covered with special rubber DIFFUSER HOUSING: stainless steel AISI 304. DIFFUSERS: technopolymer reinforced with glass fibre . PUMP CASING: stainless steel AISI 304. PUMP SHAFT: stainless steel AISI 304. PUMP BEARINGS: housing in special technopolymer with stainless steel AISI 316 shaft bushes, chrome oxide coated to resist sand. MOTOR BRACKET: nickel-plated cast iron, dimensions to NEMA standards. DRIVE COUPLING: stainless steel AISI 420. SCREWS, FILTER AND CABLE COVER: stainless steel AISI 304. MOTOR: Pedrollo 4" submerged electric motor(up to 3 kW) Pedrollo 6" submerged electric motor(from 4 to 30 kW) 6SR: three-phase380415 V - 50 Hz. PROTECTION: IP 68.
OPTIONS ON REQUEST
DELIVERY BODY: stainless steel AISI 304 for 6SR36-44, nickel-plated cast iron for 6SR9-12-18-27 with 3" gas threaded port UNI ISO 228-1.
Pedrollo 4" submersible electric motor (up to7.5 kW) Franklin Electric 4" submerged electric motor (up to7.5 kW) Franklin Electric6" submerged electric motor two cable covers to suit dual voltage / (star/ delta) dual voltage motor: 230/400 V or 400/690 V / (star/delta) (from 7.5 kW to 37 kW) other voltages or frequency 60 Hz
144
500
100
50
Head H (metres)
10
6SR9
6SR12 6SR18
6SR27 6SR36
6SR44
Flow rate Q
DESCRIPTION
Borehole diameter in inches Series Flow rate in m3/h in the point of highest efficiency Number of stages
6 SR 9 / 12
145
350
6SR9/24
300
=60% 6SR9/21
250
6SR9/17
40
200
Head H (metres)
35
6SR9/12
150
6SR9/9
100
6SR9/7
6SR9/5
50
Flow rate Q
TYPE
Three-phase 6SR9/5 6SR9/7 6SR9/9 6SR9/12 6SR9/17 6SR9/21 6SR9/24
POWER
kW HP Q
m3/h l/min
3 50
6 100
9 150
12 200
15 250
66 61 53 38 15 92 85 74 53 21 119 110 95 68 27 158 146 127 91 36 224 207 180 129 51 278 256 222 160 63 317 293 255 182 72 Tolerance of the performance curves according to EN ISO 9906 App. A.
146
450
=67%
400
6SR12/28
350
6SR12/25
52
300
6SR12/21
47
Head H (metres)
250
6SR12/18
6SR12/15
200
150
6SR12/11
6SR12/8
100
6SR12/6 6SR12/4
50
Flow rate Q
TYPE
Three-phase 6SR12/4 6SR12/6 6SR12/8 6SR12/11 6SR12/15 6SR12/18 6SR12/21 6SR12/25 6SR12/28
POWER
kW HP Q
m3/h l/min
147
=71%
6SR18/26
58
6SR18/22
50
Head H (metres)
6SR18/18
6SR18/6 6SR18/4
Flow rate Q
TYPE
Three-phase 6SR18/4 6SR18/6 6SR18/9 6SR18/11 6SR18/13 6SR18/15 6SR18/18 6SR18/22 6SR18/26
POWER
kW HP Q
m3/h l/min
148
6SR27/27
=68%
56
6SR27/20
6SR27/17
Head H (metres)
41
6SR27/14
6SR27/12
6SR27/5
Flow rate Q
TYPE
Three-phase 6SR27/5 6SR27/7 6SR27/8 6SR27/10 6SR27/12 6SR27/14 6SR27/17 6SR27/20 6SR27/27
POWER
kW HP Q
m3/h l/min
6 100
12 200
18 300
24 400
30 500
36 600
66 62 57 50 37 22 92 87 80 70 52 31 106 99 91 80 59 35 132 124 114 100 74 44 159 149 137 120 89 53 185 174 160 140 104 62 224 211 194 170 126 75 264 248 228 200 148 88 356 335 308 270 205 119 Tolerance of the performance curves according to EN ISO 9906 App. A.
149
300
=73% 6SR36/23
275
250
225
6SR36/19
59
200
6SR36/15
175
Head H (metres)
6SR36/13
150
6SR36/11
125
6SR36/10
31
100
6SR36/8
75
6SR36/6
50
6SR36/4
25
Flow rate Q
TYPE
Three-phase 6SR36/4 6SR36/6 6SR36/8 6SR36/10 6SR36/11 6SR36/13 6SR36/15 6SR36/19 6SR36/23
POWER
kW HP Q
m3/h l/min
42 700 19 29 39 48 53 63 72 92 111
48 800 14 20 27 34 37 44 51 65 78
150
275
=73%
250
6SR44/21
225
200
6SR44/16
57
175
Head H (metres)
6SR44/13
150
40
6SR44/11
125
6SR44/9
100
6SR44/8
75
6SR44/6 6SR44/5
50
6SR44/4 6SR44/3
25
Flow rate Q
TYPE
Three-phase 6SR44/3 6SR44/4 6SR44/5 6SR44/6 6SR44/8 6SR44/9 6SR44/11 6SR44/13 6SR44/16 6SR44/21
POWER
kW HP Q
m3/h l/min
54 900 17 23 28 34 45 51 62 73 90 118
60 1000 13 18 22 26 35 39 48 57 70 92
151
-Akg h 1025 1218 1405 1620 1987 982 1175 1362 1577 1901 1188 1360 1596 1364 1575 31.3 34.8 42.4 49.3 56.4 30.3 33.8 41.5 48.3 54.7 37.3 43.2 49.0 43.0 47.6
3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3"
137
137
DIMENSIONS mm h1 h2 571 454 658 560 745 660 875 745 1137 850 528 454 615 560 702 660 832 745 1051 850 528 660 615 745 746 850 619 745 725 850
DN
DN
-Bkg h 1375 1535 1827 2030 2191 1331 1491 1740 1900 2060 2269 2429 1158 1274 1435 1551 1713 1835 1995 2229 2462 1278 1414 1497 1633 1819 1955 2173 2392 2887 1422 1678 1934 2190 2333 2594 2850 3362 387 1309 1452 1595 1738 1994 2142 2398 2684 3083 3773 54.5 59.2 67.4 80.1 86.3 53.6 60.4 65.7 71.4 83.2 89.5 94.6 49.9 53.7 60.0 66.2 71.0 73.4 84.1 92.3 102.6 53.5 58.6 62.6 68.4 72.5 82.1 90.1 99.9 129.4 55.4 62.1 69.2 76.2 81.2 87.2 93.3 105.4 119.4 54.0 57.4 63.1 68.1 75.2 79.2 85.2 98.2 103.3 136.4
3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3"
146.5
149.5
DIMENSIONS mm h1 h2 776 599 906 629 1168 659 1341 689 1472 719 732 599 862 629 1081 659 1211 689 1341 719 1515 754 1645 784 559 599 645 629 776 659 862 689 994 719 1081 754 1211 784 1385 844 1558 904 649 629 755 659 808 689 914 719 1065 754 1171 784 1329 844 1488 904 1858 1029 823 599 1049 629 1275 659 1501 689 1614 719 1840 754 2066 784 2518 844 2970 904 710 599 823 629 936 659 1049 689 1275 719 1388 754 1614 784 1840 844 2179 904 2744 1029
h1
h1
h2
-A-
-B-
152
h2
-Akg h 927 1081 132 1573 1911 884 1038 1286 1530 1825 1112 1313 1520 1317 1499 26.6 31.4 38.8 47.0 59.4 25.7 30.5 37.9 46.1 57.7 34.3 41.6 52.0 41.4 50.6
3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3"
137
137
DIMENSIONS mm h1 h2 571 356 658 423 745 584 875 698 1137 774 528 356 615 423 702 584 832 698 1051 774 528 584 615 698 746 774 619 698 725 774
DN
DN
-Bkg h 1358 1521 1815 2020 2184 1314 1477 1728 1890 2053 2292 2422 1141 1260 1423 1541 1706 1858 1988 2227 2465 1264 1402 1487 1626 1842 1948 2171 2395 2895 1405 1664 1922 2180 2326 2617 2843 3360 3877 1292 1438 1583 1728 1987 2165 2391 2682 3086 3781 56.0 62.3 71.6 83.6 90.2 55.1 63.5 69.9 74.9 87.1 97.2 100.3 51.4 56.8 64.2 69.7 74.9 81.1 89.8 100.6 110.9 56.6 62.8 66.1 72.3 80.2 87.8 98.4 108.2 131.3 56.9 65.2 73.4 79.7 85.1 94.9 99.0 113.7 127.7 55.5 60.5 67.3 71.6 79.1 86.9 90.9 101.5 111.6 138.3
3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3"
143.5
146.5
DIMENSIONS mm h1 h2 776 582 906 615 1168 647 1341 679 1472 712 732 582 862 615 1081 647 1211 679 1341 712 1515 777 1645 777 559 582 645 615 776 647 862 679 994 712 1081 777 1211 777 1385 842 1558 907 649 615 755 647 808 679 914 712 1065 777 1171 777 1329 842 1488 907 1858 1037 823 582 1049 615 1275 647 1501 679 1614 712 1840 777 2066 777 2518 842 2970 907 710 582 823 615 936 647 1049 679 1275 712 1388 777 1614 777 1840 842 2179 907 2744 1037
h1
h1
h2
-A-
-B-
h2
153
PEDROLLO MOTORS
4PD
PEDROLLO 4 SUBMERSIBLE ELECTRIC MOTORS
TYPE Rated power
Axial load Revs
Single-phase
P2
Rated current
Starting current
Efficiency
Power factor
h mm
Weight kg
(Vc=450V)
230 V / 50 Hz 4PDm / 0.50 4PDm / 0.75 4PDm / 1 4PDm / 1.5 4PDm / 2 4PDm / 3
1500
16 20 31.5 40 55 75
Three-phase
P2
Rated current
Starting current
Efficiency
h mm
Weight kg
400 V / 50 Hz 4PD / 0.50 4PD / 0.75 4PD / 1 4PD / 1.5 4PD / 2 4PD / 3 4PD / 4 4PD / 5.5 4PD / 7.5 4PD / 10
kW
HP
1/min
67% 69% 70% 73% 75% 76% 77% 79% 79% 80%
cos
1500 1500 1500 1500 2500 2500 2500 2500 2500 4500 4500 4500 4500
2815 2815 2820 2835 2830 2840 2830 2840 2830 2840
1.2 1.7 2.1 2.9 4.1 5.6 7.4 9.9 12.9 18.2
0.68 0.69 0.74 0.75 0.75 0.75 0.76 0.75 0.76 0.75
2.20 2.00 2.30 2.60 2.80 3.10 3.20 2.44 2.10 2.73
294 294 319 344 404 454 560 660 745 850
6.8 6.8 8.0 9.1 11.5 13.7 16.1 21.5 25.0 30.0
96
PEDROLLO rewindable submersible motors, oil filled, suitable for food use, 50 Hz (n=2900 1/min) Insulation: class F. - Protection: IP 68. Power cable: 1.5 metres (2.5 metres for powers higher than 3 kW) submersible type, approved for drinking water. LIMITS OF USE: Water temperature: up to +30 C Starts/hour: 25 at regular intervals Cooling: water flow rate not less than 5 cm/s
6PD
PEDROLLO 6 SUBMERSIBLE ELECTRIC MOTORS
TYPE Rated power
Axial load Revs
h
143
38 h 73
kW
HP
1/min
cos
Three-phase
P2
Rated current
Starting current
Efficiency
h mm
Weight kg
400 V / 50 Hz 6PD / 5.5 6PD / 7.5 6PD / 10 6PD / 12.5 6PD / 15 6PD / 17.5 6PD / 20 6PD / 25 6PD / 30 6PD / 40 6PD / 50
kW
HP
1/min
79% 80% 81% 82% 82% 83% 83% 84% 85% 85% 86%
cos
10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 20000 20000 20000
2830 2840 2850 2830 2840 2820 2825 2870 2810 2820 2840
0.82 0.82 0.84 0.85 0.85 0.84 0.84 0.83 0.85 0.82 0.84
599 629 659 689 719 754 784 844 904 1029 1189
36.0 38.0 41.0 44.0 47.0 49.0 51.0 55.0 61.0 82.0 98.0
PEDROLLO rewindable submersible motors, oil filled, suitable for food use, 50 Hz (n=2900 1/min) Insulation: class F. - Protection: IP 68. Power cable: 4 metres long, submersible type, approved for drinking water. LIMITS OF USE: Water temperature: up to +30 C Starts/hour: 20 at regular intervals Cooling: water flow rate not less than 16 cm/s
154
4FK
FRANKLIN E. 4 SUBMERSIBLE ELECTRIC MOTORS
TYPE Rated power
Axial load Revs
Single-phase
P2
Rated current
Starting current
Efficiency
Power factor
h mm
Weight kg
(Vc=450V)
230 V / 50 Hz 4FKm / 0.50 4FKm / 0.75 4FKm / 1 4FKm / 1.5 4FKm / 2 4FKm / 3
16 20 31.5 40 55 70
Three-phase
P2
Rated current
Starting current
Efficiency
Power factor
h mm
Weight kg
400 V / 50 Hz 4FK / 0.50 4FK / 0.75 4FK / 1 4FK / 1.5 4FK / 2 4FK / 3 4FK / 4 4FK / 5.5 4FK / 7.5 4FK / 10
kW
HP
1/min
66% 67% 69% 73% 73% 75% 76% 78% 76% 74%
cos
1500 1500 1500 2500 2500 2500 2500 2500 4500 4500 4500
2815 2815 2820 2835 2830 2840 2830 2840 2830 2840
0.70 0.75 0.75 0.76 0.76 0.75 0.75 0.78 0.79 0.79
2.1 1.9 2.1 2.8 2.5 3.1 3.2 3.4 2.8 3.6
223 242 271 299 327 356 423 584 698 774
7.4 8.3 9.5 10.9 12.1 13.5 16.5 24.1 29.4 33.0
95.5
FRANKLIN ELECTRIC resin-impregnated submersible motors, 50 Hz (n=2900 1/min) Insulation: class F. - Protection: IP 68. Power cable: 1.5 metres (2.5 metres for powers higher than 3 kW) submersible type, approved for drinking water. LIMITS OF USE: Water temperature: maximum 30 C Starts/hour: 20 at regular intervals Cooling: water flow rate not less than 8 cm/s
6FK
FRANKLIN E. 6 SUBMERSIBLE ELECTRIC MOTORS
TYPE Rated power
Axial load Revs
Three-phase
P2
Rated current
Starting current
Efficiency
Power factor
h mm
Weight kg
400 V / 50 Hz 6FK / 5.5 6FK / 7.5 6FK / 10 6FK / 12.5 6FK / 15 6FK / 20 6FK / 25 6FK / 30 6FK / 40 6FK / 50 6FK / 60
kW
HP
1/min
78% 79% 79% 81% 81% 81% 82% 83% 83% 84.5% 86%
cos
15500 15500 15500 15500 15500 15500 15500 15500 15500 27500 27500 27500 27500
2860 2870 2860 2870 2860 2860 2850 2860 2860 2880 2870
0.82 0.82 0.86 0.80 0.85 0.85 0.85 0.86 0.84 0.87 0.84
1.6 1.9 1.9 2.2 2.1 2.1 2.5 2.4 2.6 2.3 2.2
582 615 647 679 712 777 842 907 1037 1405 1558
37.5 41.1 45.2 47.5 50.9 56.7 63.3 69.3 83.9 135.0 148.0
FRANKLIN ELECTRIC resin-impregnated submersible motors, 50 Hz (n=2900 1/min) Insulation: class F. - Protection: IP 68. Power cable: 4 metres long, submersible type, approved for drinking water. LIMITS OF USE: Water temperature: maximum 30 C Starts/hour: 20 at regular intervals Cooling: water flow rate not less than 16 cm/s
137
73
38
kW
HP
1/min
cos
155
Already recognised for their innovative design and safety features, TOP pumps combine a stainless steel internal motor housing with technologically advanced materials to give an exceptionally robust construction.
RANGE OF PERFORMANCE Flow rate up to 400 l/min (24 m3/h) Head up to 14.5 m LIMITS OF USE Depth up to 5 metres (3 metres up to 0.55 kW) Liquid temperature up to + 40C (+90C for a maximum period of 3 minutes) Passage of solid bodies up to 10 mm Drainage level: 14 mm from the bottom for TOP 1-2-3 30 mm from the bottom for TOP 4-5 CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: glass filled technopolymer, particularly resistant to impact and corrosion, with threaded port ISO 228/1. SUCTION GRID: technopolymer. IMPELLER: open type in technopolymer. MOTOR SUPPORT: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal ceramic -graphite - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous single-phase for continuous duty. TOP: single-phase 220240 V - 50 Hz with capacitor and thermal overload protector built into the winding. INSULATION: class F. PROTECTION: IP 68. REGISTERED MODEL n 72765.
TOP 4-5
(single-phase) Float switch. Hosetail. Couplingwith flap valve. Neoprene power cable H05 RN-F length 10 metres with Schuko plug.
OPTIONS ON REQUEST
pumps for aggressive liquids TOP - LA special mechanical seal 10 metre power cable. N.B. required for outdoor use to comply with standard EN 60335-2-41 versions without float switch other voltages or frequency 60 Hz
156
TOP5
TOP4
TOP3
Head H (metres)
TOP2
TOP1
Flow rate Q
TYPE
Single-phase TOP 1 TOP 2 TOP 3 TOP 4 TOP 5
POWER
kW HP
m3/h
1.2 2.4 3.6 4.8 6.0 7.2 8.4 9.6 10.8 12 13.2 14.4 15.6 16.8 18.0 19.2 20.4 21.6 22.8 24 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400 2.5 1.5 1 4.5 4 3 2.5 1.8 1 6.5 6 5.5 4.8 4 3.5 2.5 2 8.7 8 7.3 6.7 6 5.3 4.7 4 3.3 2.7 2 10.8 10.2 9.6 8.9 8.3 7.7 7.1 6.4 5.8 5.2 4.5 3.9 3.3 2.6
l/min 0
6 5.5 4.5 4 3 8 7.5 6.5 6 5.5 10 9 8.8 8 7.5 12 11.5 10.7 10 9.3 14 13.5 12.7 12.1 11.5
DN
Typical installation
TYPE
Single-phase TOP 1 - LA TOP 2 - LA TOP 3 - LA TOP 4 - LA TOP 5 - LA * Wetted metal parts in
AISI 316 stainless steel.
h1 h
p minimum
minimum
DIMENSIONS mm d e 14 14 adjustable 14 21 21 21
kg p 350 350 350 450 450 450 350 350 350 450 450 450 4.1 5.0 6.4 9.8 10.8
157
The particular constructive design of the TOP FLOOR pump allows draining down to a level of 2 mm above the floor.
RANGE OF PERFORMANCE Flow rate up to 220 l/min (13.2 m3/h) Head up to 9 m LIMITS OF USE Depth up to 3 m Liquid temperature up to +40C (+90 C for a maximum period of 3 minutes) Passage of solid bodies up to 5 mm Drainage level 2 mm from the bottom CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: glass filled technopolymer, particularly resistant to impact and corrosion, with threaded port ISO 228/1. SUCTION GRID: technopolymer. IMPELLER: open type in technopolymer. MOTOR SUPPORT: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal ceramic - graphite - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous single-phase for continuous duty. TOP-FLOOR: single-phase 220240 V - 50 Hz with capacitor and thermal overload protector. INSULATION: class F. PROTECTION: IP 68. REGISTERED MODEL n 72765
OPTIONS ON REQUEST
versions with external float switch special mechanical seal 10 metre power cable. N.B. required for outdoor use to comply with standard EN 60335-2-41 other voltages or frequency 60 Hz
158
TOP2-FLOOR
TOP1-FLOOR
Head H (metres)
Flow rate Q
TYPE
Single-phase TOP1 - FLOOR TOP2 - FLOOR
POWER
kW HP
m3/h l/min
0 0 7 9
1.2 20 6 8
4.8 80 4 6
9.6 160 1 3
13.2 220 1
0.25 0.37
Typical installation
DN
PORT
DN
1" 11/4"
h1 217 237
Draining down to 2 mm
h1
kg 3.9 4.9
2 mm
2 mm
2 mm
159
Thanks to the proven VORTEX system, this submersible pump allows the clearing of dirty water containing suspended solid bodies without any risk of clogging the impeller.
RANGE OF PERFORMANCE Flow rate up to 180 l/min (10.8 m3/h) Head up to 7 m LIMITS OF USE Depth up to 3 m Liquid temperature up to + 40C (+90 C for a maximum period of 3 minutes) Passage of solid bodies up to 20 mm Drainage level 25 mm from the bottom CONSTRUCTION AND SAFETY STANDARDS
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: glass filled technopolymer, particularly resistant to impact and corrosion, with threaded port ISO 228/1. SUCTION GRID: technopolymer. IMPELLER: technopolymer. MOTOR SUPPORT: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal ceramic - graphite - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous single-phase for continuous duty. TOP-VORTEX: single-phase 220240 V - 50 Hz with capacitor and thermal overload protector. INSULATION: class F. PROTECTION: IP 68. REGISTERED MODEL n 72765
OPTIONS ON REQUEST
special mechanical seal 10 metre power cable. N.B. required for outdoor use to comply with standard EN 60335-2-41 other voltages or frequency 60 Hz
160
TOP-VORTEX
Head H (metres)
Flow rate Q
TYPE
Single-phase TOP - VORTEX
POWER
kW HP
m3/h l/min
0 0 7
1.2 20 6.5
2.4 40 6
3.6 60 5.4
4.8 80 4.8
8.4 140 3
0.37
0.50 H metres
Typical installation
DN
h1
p minimum
minimum
PORT
DN
a 152
h 288
h1 268
DIMENSIONS mm d 25
11/4"
161
Robust high-quality submersible pumps in stainless steel, for drainage of clear water. Recommended for fixed installations or for draining domestic water or rainwater, and for emptying tanks or reservoirs.
RANGE OF PERFORMANCE Flow rate up to 300 l/min (18 m3/h) Head up to 23 m LIMITS OF USE Depth up to 10 m Liquid temperature up to + 50C
Liquid temperature up to + 60C for intermittent duty. Liquid temperature up to + 90C for intermittent duty maximum 3 minutes.
Passage of solid bodies up to 10 mm Drainage level: 14 mm from the bottom for RX 1-2 30 mm from the bottom for RX 3-4-5 CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
DELIVERY BODY: stainless steel AISI 304, with threaded port ISO 228/1. SUCTION GRID: stainless steel AISI 304. IMPELLER: stainless steel AISI 304. MOTOR SUPPORT: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal ceramic - graphite - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous single-phase for continuous duty. RXm: single-phase 220240 V - 50 Hz with capacitor and thermal overload protector. RX: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68. REGISTERED MODEL.
RX
OPTIONS ON REQUEST
special mechanical seal 10 metre power cable. N.B. required for outdoor use to comply with standard EN 60335-2-41 control box for three-phase electropumps 1.1 kW single-phase versions without float switch other voltages or frequency 60 Hz
162
RX5
RX4
RX3
Head H (metres)
RX2
RX1
Flow rate Q
TYPE
Single-phase RXm 1 RXm 2 RXm 3 RXm 4 RXm 5 Three-phase RX 2 RX 3 RX 4 RX 5
POWER
kW HP
m3/h l/min
0 0 7.5 10 17 20 23
2.4 40
3.6 60
4.8 80
6.0 100
7.2 120
8.4 140
9.6 160
10.8 12.0 13.2 14.4 15.6 16.8 18.0 180 200 220 240 260 280 300
4.3 3.5 7.3 6.5 12.8 11.7 15.8 14.7 18.8 17.7
2.8 2 5.8 5 4.3 10.5 9.5 8.5 13.5 12.5 11.5 16.5 15.5 14.5
3.5 2.8 2 7.3 6.3 5.2 4 10.5 9.3 8.2 7.2 13.5 12.4 11.3 10.2
3 6 9
5 8
h1
p minimum
minimum
PORT
DN
kg p 350 350 350 500 500 500 350 350 350 500 500 500 1~ 4.7 5.7 12.0 13.0 14.0 3~ 5.5 10.7 11.7 12.7
163
Robust high-quality VORTEX submersible pumps in stainless steel. The proven VORTEX system allows the clearing of dirty water containing suspended solids.
RANGE OF PERFORMANCE Flow rate up to 450 l/min (27 m3/h) Head up to 14.5 m LIMITS OF USE Depth up to 10 m Liquid temperature up to + 50C
Liquid temperature up to + 60C for intermittent duty. Liquid temperature up to + 90C for intermittent duty maximum 3 minutes.
CONSTRUCTION CHARACTERISTICS
Passage of solid bodies: up to 20 mm for RX2 - up to 40 mm for RX3-4-5 Drainage level from the bottom: 25 mm for RX2 - 40 mm forRX3-4-5 CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
DELIVERY BODY: stainless steel AISI 304, with threaded port ISO 228/1. SUCTION GRID: stainless steel AISI 304. IMPELLER: stainless steel AISI 304. MOTOR SUPPORT: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous single-phase for continuous duty. RXm: single-phase 220240 V - 50 Hz with capacitor and thermal overload protector. RX: three-phase380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68. REGISTERED MODEL.
RX
OPTIONS ON REQUEST
special mechanical seal 10 metre power cable. N.B. required for outdoor use to comply with standard EN 60335-2-41 control box for three-phase pumps 1.1 kW single-phase versions without float switch other voltages or frequency 60 Hz
164
RX5/40
RX4/40
Head H (metres)
RX3/40
RX2/20
Flow rate Q
TYPE
Single-phase RXm 2/20 RXm 3/40 RXm 4/40 RXm 5/40 Three-phase RX 2/20 RX 3/40 RX 4/40 RX 5/40
POWER
kW HP
m3/h l/min
0 0 7 9 11 15
2.4 40 6 8 10 14
4.8 80
7.2
8.4
12
15
18
19.5
21
24
27
200 250
400 450
4.8 4.3 3.7 3.1 2.5 2 6.8 6.3 5.7 5.1 4.5 4 3.4 2 8.8 8.3 7.7 7.1 6.6 6 5.5 4 2.7 2 12.8 12.2 11.6 11 10.4 9.8 9.2 7.8 6.3 5.6 4.9 3.5 2 Tolerance of the performance curves according to EN ISO 9906 App. A.
h1 h
p minimum
minimum
TYPE Single-phase Three-phase RXm 2/20 RX 2/20 RXm 3/40 RX 3/40 RXm 4/40 RX 4/40 RXm 5/40 RX 5/40
PORT
DN
11/4"
11/2"
11/2"
11/2"
kg p 350 500 500 500 350 500 500 500 1~ 5.9 12.4 13.4 14.4 3~ 5.7 11.1 12.1 13.1
165
Submersible pumps for domestic use, economic, compact and reliable. Recommended for draining clear or slightly dirty water.
RANGE OF PERFORMANCE Flow rate up to 300 l/min (18 m3/h) Head up to 14 m LIMITS OF USE Depth up to 5 m Liquid temperature up to + 40C Passage of suspended solid bodies up to 10 mm Drainage level 15 mm from the bottom For continuous duty: minimum immersion 180 mm from pump base CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
DELIVERY BODY: cast iron, with threaded port ISO 228/1. MOTOR CASING: stainless steel AISI 304. SUCTION GRID: stainless steel AISI 304. IMPELLER: open type, in technopolymer. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. MOTOR: submersible asynchronous single-phase for continuous duty. ZDm: single-phase 220240 V - 50 Hz with capacitor and thermal overload protector. INSULATION: class F. PROTECTION: IP 68.
OPTIONS ON REQUEST
special mechanical seal 10 metre power cable. N.B. required for outdoor use to comply with standard EN 60335-2-41 versions without float switch other voltages or frequency 60 Hz
166
15 14 13 12 11 10
Head H (metesi)
ZD1A-E ZD1AR-E
40
35
9 8 7 6 5 4 3 2
ZD1B-E
30
25
20
15
10
1 0
0
0
0
25
50
75
5
100
125
150
10
175
200
225
250
15
275
300
l/min
m3/h
Flow rate Q
m3/h l/min 0 0 8.5 11 14 1.5 25 8 10.5 13.5 3.0 50 7.5 10 13 4.5 75 6.5 9 12.2 6.0 100 5.5 8.5 11.5 7.5 125 4.8 7.5 10.5 9.0 150 3.5 6.5 9.5 10.5 175 2.5 5.5 8.3
TYPE
Single-phase ZDm 1B-E ZDm 1A-E ZDm 1AR-E
POWER
kW HP
12.0 200 1 4 7
16.5 275
18.0 300
3.2
Typical installation
a
h1
DN
p minimum
minimum
PORT
DN
11/2"
11/2"
11/2"
b 81 81 81
kg e regolabile regolabile adjustable regolabile p 450 450 450 450 450 450 9.8 10.4 11.3
167
VORTEX submersible pumps, economic, compact, reliable, recommended for domestic use. The proven VORTEX system allows the clearing of dirty water containing suspended solid bodies.
RANGE OF PERFORMANCE Flow rate up to 300 l/min (18 m3/h) Head up to 10 m LIMITS OF USE Depth up to 5 m Liquid temperature up to + 40C Passage of suspended solid bodies up to 40 mm Drainage level 40 mm from the bottom For continuous duty: minimum immersion 240 mm from pump base CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
DELIVERY BODY: cast iron, with threaded port ISO 228/1. MOTOR CASING: stainless steel AISI 304. IMPELLER: open type, in glass filled technopolymer. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. MECHANICAL SEAL: ceramic - graphite - NBR. MOTOR: submersible asynchronous single-phase for continuous duty. ZXm: single-phase 220240 V - 50 Hz with capacitorr and thermal overload protector. INSULATION: class F. PROTECTION: IP 68.
OPTIONS ON REQUEST
special mechanical seal 10 metre power cable. N.B. required for outdoor use to comply with standard EN 60335-2-41 versions without float switch other voltages or frequency 60 Hz
168
ZX1A
ZX1B
Head H (metres)
Flow rate Q
TYPE
Single-phase ZXm 1B/40 ZXm 1A/40
POWER
kW HP
m3/h l/min
0 0 9 11
3.0 50 8.3 10
4.5 75 8 9.5
0.50 0.60
Typical installation
DN
p minimum
h1
minimum
PORT
DN
11/2"
11/2" 11/2"
35 mm 40 mm 35 mm
b 86 93 86
kg e regolabile adjustable regolabile p 450 450 450 450 450 450 10.8 12.4
169
DRAINAGE submersible pumps for professional use, particularly reliable with generous motor specification and hard-faced mechanical seal.
RANGE OF PERFORMANCE Flow rate up to 400 l/min (24 m3/h) Head up to 27 m LIMITS OF USE Depth up to 5 m Liquid temperature up to + 40C Passage of suspended solid bodies up to 10 mm Drainage level 15 mm from the bottom For continuous duty: minimum immersion 220 mm from pump base CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: cast iron, with threaded port ISO 228/1. MOTOR CASING: stainless steel AISI 304. SUCTION GRID: stainless steel AISI 304. IMPELLER: open type, in glass filled technopolymer MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous for continuous duty. Dm: single-phase 220240 V - 50 Hz with capacitor and thermal overload protector. D: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
STANDARD FEATURES: Dm
(single-phase) Float switch. Neoprene power cable H07 RN-F length 5 metres with Schuko plug. (three-phase) Neoprene power cable H07 RN-F length 5 metres.
OPTIONS ON REQUEST
10 metre power cable. N.B. required for outdoor use to comply with standard EN 60335-2-41 control box for three-phase pumps 1.1 kW single-phase pumps without float switch other voltages or frequency 60 Hz
170
D30
D20 D15
Head H (metres)
D18 D10
D8
D6
Flow rate Q
TYPE
Single-phase Dm 6 Dm 8 Dm 10 Dm 15 Dm 18 Dm 20 Dm 30 Three-phase D 10 D 15 D 20 D 30
POWER
kW HP
m3/h l/min
0 0
1.5 25
3.0 50
4.5 75
6.0 100
7.5 125
9.0 150
7.5 6.8 6 10.5 9.8 9 13.2 12.5 11.8 18 17.5 16.5 13.5 12 10.7 17.5 16 15 23.5 22 21
3.5 9.2
2 8
13
11.5
10
DN
p minimo
h1
minimum kg
b 81 81 81 90 81 81 81 90
171
VORTEX submersible pumps for professional use, particularly reliable with generous motor specification and hard-faced mechanical seal. The proven VORTEX system allows the clearing of dirty water containing suspended solids.
RANGE OF PERFORMANCE Flow rate up to 500 l/min (30 m3/h) Head up to 15 m LIMITS OF USE Depth up to 5 m Liquid temperature up to + 40C Passage of suspended solid bodies up to 50 mm For continuous duty: minimum immersion 290 mm from pump base CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: cast iron, with threaded port ISO 228/1. MOTOR CASING: stainless steel AISI 304. BASE: stainless steel AISI 304. IMPELLER: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous for continuous duty. VXm: single-phase 220240 V - 50 Hz with capacitor and thermal overload protector. VX: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
VX
OPTIONS ON REQUEST
10 metre power cable. N.B. required for outdoor use to comply to standard EN 60335-2-41 control panel for three-phase pumps 1.1 kW single-phase pumps without float switch other voltages or frequency 60 Hz
172
VX15/35
VX15/50
Head H (metres)
VX10/35
Flow rate Q
TYPE
Single-phase VXm 8/35 VXm 10/35 VXm 15/35 VXm 8/50 VXm 10/50 VXm 15/50 Three-phase VX 10/35 VX 15/35 VX 10/50 VX 15/50
POWER
kW HP
m3/h l/min
0 0 8.4 10 15 6 7.5 11
21 350
24 400
27 450
30 500
6 1 2.4 6.8
4 1.5 6
DN
p minimum
h1
minimum kg
TYPE Single-phase Three-phase VXm 8/35 VXm 10/35 VX 10/35 VXm 15/35 VX 15/35 VXm 8/50 VXm 10/50 VX 10/50 VXm 15/50 VX 15/50
PORT
DN
35 mm 35 mm 35 mm 50 mm 50 mm 50 mm
b 87 87 87 92 90 90 90 97
DIMENSIONS mm h h1 380 123 380 123 380 123 400 133 410 153 410 153 410 153 430 158
d 40 40 40 55 55 55 55 65
173
DOUBLE-CHANNEL submersible pumps for professional use. Particularly efficient and reliable, with generous motor specification and hard-faced mechanical seal.
RANGE OF PERFORMANCE Flow rate up to 800 l/min (48 m3/h) Head up to 15 m LIMITS OF USE Depth up to 5 m Liquid temperature up to + 40C Passage of suspended solid bodies up to 50 mm For continuous duty: minimum immersion 290 mm from pump base CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: cast iron, with threaded port ISO 228/1. MOTOR CASING: stainless steel AISI 304. BASE: stainless steel AISI 304. IMPELLER: double-channel in stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous for continuous duty. MCm: single-phase 220240 V - 50 Hz with capacitorr and thermal overload protector. MC: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
MC
OPTIONS ON REQUEST
10 metre power cable. N.B. required for outdoor use to comply with standard EN 60335-2-41 control box for three-phase pumps 1.1 kW single-phase pumps without float switch other voltages or frequency 60 Hz
174
16
MC12/50
14
45
12
MC10/50
40
35
10
Head H (metres)
30
25
20
15
4
10
2
5
0 0
0
100
10
200
300
20
400
Flow rate Q
3 50 10.7 14 6 100 9.7 13 9 150 8.7 12.3
500
30
600
40
700
800
50
TYPE
Single-phase MCm 10/50 MCm 12/50 Three-phase MC 10/50 MC 12/50
POWER
kW HP
m3/h l/min
0 0 12 15
21 350 5 8.8
24 400 4 8
27 450 3 7
30 500 2 6.2
36 600 4.5
42 700 2.7
48 800 1
0.75 1.1
1 1.5
H metres
DN
p minimum
h1
minimum
PORT
DN
50 mm 50 mm 50 mm
a 110 120
b 90 97
c 150 163
kg e regolabile adjustable regolabile p 500 500 500 500 500 500 1~ 14.3 16.5 3~ 13.3 14.3
175
VORTEX stainless steel submersible pumps for professional use, particularly reliable with generous motor specification and hard-faced mechanical seal. The proven VORTEX system allows the clearing of dirty water containing suspended solids.
RANGE OF PERFORMANCE Flow rate up to 400 l/min (24 m3/h) Head up to 10 m LIMITS OF USE Depth up to 5 m Liquid temperature up to + 40C Passage of suspended solid bodies up to 50 mm For continuous duty: minimum immersion 280 mm from pump base. CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: stainless steel AISI 304, with threaded port ISO 228/1. MOTOR CASING AND BASE: stainless steel AISI 304. IMPELLER: stainless steel AISI 304. MOTOR SHAFT: stainless steel AISI 316. DOUBLE SEAL: mechanical seal silicon carbide - NBR - stainless steal AISI 316, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous for continuous duty. VXm-I: single-phase 220240 V - 50 Hz with capacitor and thermal overload protector . VX-I: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
VX-I
OPTIONS ON REQUEST
10 metre power cable. N.B. required for outdoor use to comply with standard EN 60335-2-41 single-phase pumps without float switch other voltages or frequency 60 Hz
176
VX10/35-I
VX8/35-I VX10/50-I
Head H (metres)
VX8/50-I
Flow rate Q
TYPE
Single-phase VXm 8/35-I VXm 10/35-I VXm 8/50-I VXm 10/50-I Three-phase VX 10/35-I VX 10/50-I
POWER
kW HP
m3/h l/min
0 0 8.4 10 6 7.5
15 250 2 4 2.8 4
18 300 2 2 3.2
21 350
24 400
1 2.4
1.5
p minimum
DN
h1
minimum
TYPE Single-phase Three-phase VXm 8/35-I VXm 10/35-I VX 10/35-I VXm 8/50-I VXm 10/50-I VX 10/50-I
PORT
DN
11/2"
35 mm 35 mm 35 mm 50 mm 50 mm 50 mm
DIMENSIONS mm h h1 d 380 87 40 380 87 40 380 87 40 410 108 55 410 108 55 410 108 55
kg e regolabile regolabile adjustable regolabile regolabile p 500 500 500 500 500 500 500 500 500 500 1~ 9.7 9.6 12.8 10.7 3~ 9.3 9.7
177
DOUBLE-CHANNEL stainless steel submersible pumps for professional use. Particularly efficient and reliable, with generous motor specification and hard-faced mechanical seal.
RANGE OF PERFORMANCE Flow rate up to 800 l/min (48 m3/h) Head up to 15 m LIMITS OF USE Depth up to 5 m Liquid temperature up to + 40C Passage of suspended solid bodies up to 50 mm For continuous duty: minimum immersion 280 mm from pump base CONSTRUCTION AND SAFETY STANDARDS EN 60 335-1 IEC 335-1 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: stainless steel AISI 304, with threaded port ISO 228/1. MOTOR CASING AND BASE: stainless steel AISI 304. IMPELLER: double-channel, in stainless steel AISI 304. MOTOR SHAFT: stainless steel AISI 316. DOUBLE SEAL: mechanical seal silicon carbide - NBR - stainless steal AISI 316, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. . MOTOR: submersible asynchronous for continuous duty. MCm-I: single-phase 220240 V - 50 Hz with capacitor and thermal overload protector. MC-I: three-phase 380415V - 50 Hz. INSULATCION: class F. PROTECTION: IP 68.
MC-I
OPTIONS ON REQUEST
10 metre power cable. N.B. required for outdoor use to comply with standard EN 60335-2-41 control box for three-phase pumps 1.1 kW single-phase pumps without float switch other voltages or frequency 60 Hz
178
16
MC15/50-I
14
45
12
MC10/50-I
40
35
10
Head H (metres)
30
25
20
15
4
10
2
5
0 0
0
100
10
200
300
20
400
Flow rate Q
3 50 10.7 14 6 100 9.7 13 9 150 8.7 12.3
500
30
600
40
700
800
50
TYPE
Single-phase MCm 10/50-I Three-phase MC 10/50-I MC 15/50-I
POWER
kW HP
m3/h l/min
0 0 12 15
21 350 5 8.8
24 400 4 8
27 450 3 7
30 500 2 6.2
36 600 4.5
42 700 2.7
48 800 1
0.75 1.1
1 1.5
H metres
p minimum
DN
h1
minimum
PORT
DN
50 mm 50 mm 50 mm
kg e regolabile adjustable regolabile p 500 500 500 500 500 500 1~ 12.8 3~ 9.8 12.8
179
DRAINAGE submersible pumps in cast iron, particularly robust and reliable. Ideal for fixed installations.
RANGE OF PERFORMANCE Flow rate up to 400 l/min (24 m3/h) Head up to 27 m LIMITS OF USE Depth up to 10 m Liquid temperature up to + 40C Passage of suspended solid bodies up to 10 mm Drainage level to 15 mm from the bottom For continuous duty: minimum immersion 210 mm from pump base CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 EN 60 335-1 IEC 34-1 IEC 335-1 CEI 2-3 CEI 61-150 EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
PUMP BODY: cast iron, with threaded port ISO 228/1. MOTOR CASING: cast iron. SUCTION GRID: stainless steel AISI 304. IMPELLER: cast iron. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous for continuous duty. DCm: single-phase 220240 V - 50 Hz with thermal overload protector. DC: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
DC
OPTIONS ON REQUEST
control box for three-phase pumps 1.1 kW single-phase pumps without float switch other voltages or frequency 60 Hz
180
DC30
DC20 DC15
Head H (metres)
DC18 DC10
DC8
DC6
Flow rate Q
TYPE
Single-phase DCm 6 DCm 8 DCm 10 DCm 15 DCm 18 DCm 20 DCm 30 Three-phase DC 10 DC 15 DC 20 DC 30
POWER
kW HP
m3/h l/min
0 0
1.5 25
3.0 50
4.5 75
6.0 100
7.5 125
9.0 150
7.5 6.8 6 10.5 9.8 9 13.2 12.5 11.8 18 17.5 16.5 13.5 12 10.7 17.5 16 15 23.5 22 21
3.5 9.2
2 8
13
11.5
10
DN
p minimum
o b c
h1
minimum kg
TYPE Single-phase Three-phase DCm 6 DCm 8 DCm 10 DC10 DCm 15 DC15 DCm 18 DCm 20 DC 20 DCm 30 DC 30
PORT
DN
11/2"
11/2" 11/2" 11/2"
b 90 90 90 90 90 90 90
h1 66 66 66 80 66 66 66 80
d 15 15 15 15 15 15 15
e p regolabile 500 regolabile 500 regolabile 500 adjustable regolabile 500 regolabile 500 regolabile 500 regolabile 500
181
VORTEX submersible pumps made of cast iron, particularly robust and reliable, ideal for fixed installations. The proven VORTEX system allows the clearing of dirty water containing suspended solids.
RANGE OF PERFORMANCE Flow rate up to 500 l/min (30 m3/h) Head up to 15 m LIMITS OF USE Depth up to 10 m Liquid temperature up to + 40C Passage of solid bodies max 35 mm for VXC/35 Passage of solid bodies max 45 mm for VXC/45 For continuous duty: minimum immersion 290 mm from pump base CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3
CONSTRUCTION CHARACTERISTICS
l
PUMP BODY: cast iron, with threaded port ISO 228/1. MOTOR CASING AND BASE: cast iron. IMPELLER: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous for continuous duty. VXCm: single-phase 220240 V - 50 Hz with thermal overload protector. VXC: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
VXC
OPTIONS ON REQUEST
control box for three-phase pumps 1.1 kW single-phase pumps without float switch other voltages or frequency 60 Hz
182
VXC15/35
VXC15/45
Head H (metres)
VXC10/35
Flow rate Q
TYPE
Single-phase VXCm 8/35 VXCm 10/35 VXCm 15/35 VXCm 8/45 VXCm 10/45 VXCm 15/45 Three-phase VXC 10/35 VXC 15/35 VXC 10/45 VXC 15/45
POWER
kW HP
m3/h l/min
0 0 8.4 10 15 6 7.5 11
21 350
24 400
27 450
30 500
6 1 2.4 6.8
4 1.5 6
DN
p minimum
o b c
h1
minimum
TYPE Single-phase Three-phase VXCm 8/35 VXCm 10/35 VXC 10/35 VXCm 15/35 VXC 15/35 VXCm 8/45 VXCm 10/45 VXC 10/45 VXCm 15/45 VXC 15/45
PORT
DN
11/2"
11/2"
11/2" 2"
2"
2"
35 mm 35 mm 35 mm 45 mm 45 mm 45 mm
b 87 90 87 92 90 90 90 97
kg d 40 40 40 55 55 55 e regolabile regolabile regolabile adjustable regolabile regolabile regolabile p 500 500 500 500 500 500 500 500 500 500 500 500 500 500 1~ 17.0 18.7 20.9 18.0 19.7 21.9 3~ 17.1 19.8 18.0 20.8
183
DOUBLE-CHANNEL cast iron submersible pumps for professional use. Particularly efficient and reliable, with generous motor specification and hard-faced mechanical seal.
RANGE OF PERFORMANCE Flow rate up to 800 l/min (48 m3/h) Head up to 15 m LIMITS OF USE Depth up to 10 m Liquid temperature up to + 40C Passage of suspended solid bodies up to 45 mm For continuous duty: minimum immersion 290 mm from pump base CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3
PUMP BODY: cast iron, with threaded port ISO 228/1. MOTOR CASING AND BASE: cast iron. IMPELLER: double-channel, in stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous for continuous duty. MCm: single-phase 220240 V - 50 Hz with thermal overload protector. MC: three-phase 380415 V - 50 Hz. INSULATION: class F. PROTECTION: IP 68.
MC
OPTIONS ON REQUEST
control box for three-phase pumps 1.1 kW single-phase pumps without float switch other voltages or frequency 60 Hz
184
MC15/45
MC10/45
Head H (metres)
Flow rate Q
TYPE
Single-phase MCm 10/45 MCm 15/45 Three-phase MC 10/45 MC 15/45
POWER
kW HP
m3/h l/min
0 0 12 15
3 50 10.7 14
6 100 9.7 13
21 350 5 8.8
24 400 4 8
27 450 3 7
30 500 2 6.2
36 600 4.5
42 700 2.7
48 800 1
0.75 1.1
1 1.5
H metres
DN
p minimum
o b c
h1
minimum
PORT
DN
45 mm 45 mm 45 mm
a 110 120
b 90 97
c 150 163
h 375 395
h1 148 153
kg d 55 55 55 e regolabile adjustable regolabile p 500 500 500 500 500 500 1~ 19.9 22.1 3~ 18.3 21.0
185
VORTEX submersible pumps in cast iron, particularly robust and reliable, intended for continuous heavy duty use in fixed installations, in building services and industry. Recommended for sewage and waste water of all types with solid impurities.
RANGE OF PERFORMANCE Flow rate up to 1200 l/min (72 m3/h) Head up to 16 m LIMITS OF USE Depth up to 10 m Liquid temperature up to + 40C Passage of solid bodies max 50 mm for VXC 15-20-30/50 Passage of solid bodies max 70 mm for VXC 15-20-30/70 For continuous duty: minimum immersion 420 mm from pump base CONSTRUCTION AND SAFETY STANDARDS
CONSTRUCTION CHARACTERISTICS
PUMP BODY, MOTOR CASING: cast iron. IMPELLER: cast iron. BASE: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4057. DOUBLE SEAL: mechanical seal silicon carbide - widia -NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous, 2 pole, for continuous duty. VXCm: single-phase 220240 V - 50 Hz Models up to 1.5 kW have built in thermal protection
- 2.2 kW single-phase versions have a thermal protector provided in the winding for connection to the control box.
VXC:
INSULATION: class F.
PROTECTION: IP 68.
OPTIONS ON REQUEST
control box for three-phase pumps dual voltage: 230/400 V or 400/690 V single-phase versions without float switch other voltages or frequency 60 Hz
186
VXC30/50
VXC20/50
VXC15/50 VXC30/70
Head H (metres)
VXC20/70
VXC15/70
Flow rate Q
TYPE
Single-phase VXCm 15/50 VXCm 20/50 VXCm 30/50 VXCm 15/70 VXCm 20/70 VXCm 30/70 Three-phase VXC 15/50 VXC 20/50 VXC 30/50 VXC 15/70 VXC 20/70 VXC 30/70
POWER
kW HP
m3/h l/min
0 0
6 100 10.5 12 15
48 800
51 850
54 900
60 1000
66
72
1100 1200
1.5 2 3 1.5 2 3
2 1 2.4 4.6
2 4.2
1 3.3
2.5
1.5
DN
p minimum
o b c DIMENSIONS mm m n o
h1
minimum kg
TYPE Single-phase Three-phase VXCm 15/50 VXC 15/50 VXCm 20/50 VXC 20/50 VXCm 30/50 VXC 30/50 VXCm 15/70 VXC 15/70 VXCm 20/70 VXC 20/70 VXCm 30/70 VXC 30/70
PORT
DN
21/2"
21/2"
21/2" 3"
3"
3"
50 mm 50 mm 50 mm 70 mm 70 mm 70 mm
c h h1 212 490 188 490 212 490 188 212 500/490 188 240 530 530 230 240 530 230 240 540/530 230
81
200
85
d 75 75 75 85 85 85
e p regolabile 800 regolabile 800 regolabile 800 adjustable 800 regolabile 800 regolabile 800 regolabile 800
187
SINGLE-CHANNEL submersible pumps highly efficient and particularly robust and reliable. Ideal for fixed installations or for continuous heavy duty use, recommended for sewage and waste water with solid impurities in building services or industrial applications.
RANGE OF PERFORMANCE Flow rate up to 1600 l/min (96 m3/h) Head up to 24 m LIMITS OF USE Depth up to 10 m Liquid temperature up to + 40C Passage of solid bodies max 50 mm for MC 15-20-30/50 Passage of solid bodies max 70 mm for MC 30/70 For continuous duty: minimum immersion 420 mm from pump base CONSTRUCTION AND SAFETY STANDARDS
CONSTRUCTION CHARACTERISTICS
PUMP BODY, MOTOR CASING: cast iron. IMPELLER: single-channel, in cast iron. BASE: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4057. DOUBLE SEAL: mechanical seal silicon carbide - widia - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous, 2 pole, for continuous duty. MCm: single-phase 220240 V - 50 Hz Models up to 1.5 kW have built in thermal protection
- 2.2 kW single-phase versions have a thermal protector provided in the winding for connection to the control box.
MC:
INSULATION: class F.
PROTECTION: IP 68.
MC
control box for three-phase pumps dual voltage: 230/400 V or 400/690 V single-phase versions without float switch other voltages or frequency 60 Hz
188
MC30/50
MC20/50
Head H (metres)
MC15/50
MC30/70
Flow rate Q
TYPE
Single-phase MCm 15/50 MCm 20/50 MCm 30/50 MCm 30/70 Three-phase MC 15/50 MC 20/50 MC 30/50 MC 30/70
POWER
kW HP
m3/h l/min
0 0
3 50
6 100
12
18
24 400
30 500 7 9 14 9.5
36 600 5 7 12 8.8
42 700 3 5 10 8.2
48 800 1 3 8 7.6
54
60
66
72
84
96
200 300
1.5 2 3 3
16 18 H metres 24 13
14 16 22
4 6
2 5.3
4.8
3.2
DN
p minimum
o b c
h1
minimum
TYPE Single-phase Three-phase MCm 15/50 MC 15/50 MCm 20/50 MC 20/50 MCm 30/50 MC 30/50 MCm 30/70 MC 30/70
PORT
DN
21/2"
21/2"
21/2"
3"
50 mm 50 mm 50 mm 70 mm
c h h1 212 490 188 490 212 490 188 212 500/490 188 240 540/530 230
DIMENSIONS mm m n o 81 200 85
kg d 75 75 75 85 e regolabile regolabile regolabile regolabile regolabile p 800 800 800 800 800 800 800 800 800 800 1~ 34.0 35.7 41.7 48.0 3~ 31.8 34.0 35.8 42.1
189
stationary version
PVXC series pumps are supplied complete with base pedestal elbow (with mating flange), pump slide bracket and guide tube top support, for fixed sewer installations.
RANGE OF PERFORMANCE Flow rate up to 1200 l/min (72 m3/h) Head up to 16 m LIMITS OF USE Depth up to 10 m Liquid temperature up to + 40C Passage of solid bodies max 50 mm for PVXC 15-20-30/50 Passage of solid bodies max 70 mm for PVXC 15-20-30/70 For continuous duty: minimum immersion 430 mm from pump base CONSTRUCTION AND SAFETY STANDARDS
CONSTRUCTION CHARACTERISTICS
PUMP BODY, MOTOR CASING AND BASE PEDESTAL: cast iron. IMPELLER: cast iron. BASE: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4057. DOUBLE SEAL: mechanical seal silicon carbide - widia - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous, 2 pole, for continuous duty. PVXCm: single-phase 220240 V - 50 Hz Models up to 1.5 kW have built in thermal protection
- 2.2 kW single-phase versions have a thermal protector provided in the winding for connection to the control box.
PVXC:
INSULATION: class F.
PROTECTION: IP 68.
STANDARD FEATURES:
Base pedestal elbow (duct foot) Threaded delivery counterflange Top supports for guide tubes
OPTIONS ON REQUEST
control box for three-phase pumps dual voltage: 230/400 V or 400/690 V single-phase versions without float switch other voltages or frequency 60 Hz
190
PVXC30/50
PVXC20/50
PVXC15/50
Head H (metres)
PVXC30/70
PVXC20/70
PVXC15/70
Flow rate Q
TYPE
Single-phase PVXCm 15/50 PVXCm 20/50 PVXCm 30/50 PVXCm 15/70 PVXCm 20/70 PVXCm 30/70 Three-phase PVXC 15/50 PVXC 20/50 PVXC 30/50 PVXC 15/70 PVXC 20/70 PVXC 30/70
POWER
kW HP
m3/h l/min
0 0
6 100 10.5 12 15
24 400
27 450
30 500
36
42
48 800
51 850
54
60
66
72
1.5 2 3 1.5 2 3
6.5 5.6 4.5 8 7,2 6.5 11.5 10.8 10 4.4 4 3.7 6 5.6 5.2 8.2 7.8 7.5
2 1 2.4 4.6
2 4.2
1 3.3
2.5
1.5
Guide tubes
external 27 mm maximum internal 19.521.5 mm
w
DN
n PORT
DN
passage of solid bodies
TYPE Single-phase Three-phase PVXCm 15/50 PVXC 15/50 PVXCm 20/50 PVXC 20/50 PVXCm 30/50 PVXC 30/50 PVXCm 15/70 PVXC 15/70 PVXCm 20/70 PVXC 20/70 PVXCm 30/70 PVXC 30/70
21/2"
21/2"
21/2" 3"
3"
3"
50 mm 50 mm 50 mm 70 mm 70 mm 70 mm
a 60 60 60 60 60 60 60
c 51 51 51 70 70 70
d
mm g h m 10 387 200 387 10 387 200 10 397/387 200 10 10 405 256 405 10 405 256 10 415/405 256
kg* n w 1~ 3~ 120 72 42.0 40.0 120 72 43.8 42.3 120 72 49.7 43.8 150 92 53.0 50.7 150 92 54.9 53.0 150 92 61.1 55.2 (*weight including counterflange)
191
stationary version
PMC series pumps are supplied complete with base pedestal elbow (with mating flange), pump slide bracket and guide tube top support, for fixed sewer installations.
RANGE OF PERFORMANCE Flow rate up to 1600 l/min (96 m3/h) Head up to 24 m LIMITS OF USE Depth up to 10 m Liquid temperature up to + 40C Passage of solid bodies max 50 mm for PMC 15-20-30/50 Passage of solid bodies max 70 mm for PMC 30/70 For continuous duty: minimum immersion 430 mm from pump base CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3 INSTALLATION AND USE
PMC SERIES PUMPS ARE MADE OF EXCEPTIONALLY ROBUST HEAVY GAUGE CAST IRON, ABRASION RESISTANT AND LONGLASTING, WITH A SINGLE-CHANNEL IMPELLER WHICH CAN HANDLE LIQUIDS WITH SUSPENDED SOLIDS AND SHORT FIBRES. THEY ARE IDEAL FOR SEWAGE, WASTE AND GROUND WATER, EVEN WITH SOLIDS OR MUD, AND ARE THEREFORE RECOMMENDED FOR BUILDING OR INDUSTRIAL EFFLUENT AND DRAINAGE OF LARGE AREAS SUCH AS CAR PARKS.
CONSTRUCTION CHARACTERISTICS
PUMP BODY, MOTOR CASING AND BASE PEDESTAL: cast iron. IMPELLER: single-channel, in cast iron. BASE: stainless steel AISI 304. MOTOR SHAFT: stainless steel EN 10088-3 - 1.4057. DOUBLE SEAL: mechanical seal silicon carbide - widia - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. MOTOR: submersible asynchronous, 2 pole, for continuous duty. PMCm: single-phase 220240 V - 50 Hz Models up to 1.5 kW have built in thermal protection
- 2.2 kW single-phase versions have a thermal protector provided in the winding for connection to the control box.
PMC:
INSULATION: class F.
PROTECTION: IP 68.
STANDARD FEATURES:
Base pedestal elbow (duct foot) Threaded delivery counterflange Top supports for guide tubes
OPTIONS ON REQUEST
control box for three-phase pumps dual voltage: 230/400 V or 400/690 V single-phase versions without float switch other voltages or frequency 60 Hz
192
PMC30/50
PMC20/50 PMC15/50
Head H (metres)
PMC30/70
Flow rate Q
TYPE
Single-phase PMCm 15/50 PMCm 20/50 PMCm 30/50 PMCm 30/70 Three-phase PMC 15/50 PMC 20/50 PMC 30/50 PMC 30/70
POWER
kW HP
m3/h l/min
0 0
6 100 14 16 22
12 200
15 250
18 300
30 500 7 9 14 9.5
36 600 5 7 12 8.8
42
48
54
60
66
72
84
96
1.5 2 3 3
16 H metres 18 24 13
4 6
2 5.3
4.8
3.2
w
DN
TYPE Single-phase Three-phase PMCm 15/50 PMC 15/50 PMCm 20/50 PMC 20/50 PMCm 30/50 PMC 30/50 PMCm 30/70 PMC 30/70
PORT
DN
21/2"
21/2"
21/2"
3"
50 mm 50 mm 50 mm 70 mm
a 60 60 60 60 60
c 51 51 51 70
d
mm kg* g h m n w 1~ 3~ 10 387 200 120 72 43.0 40.8 387 10 387 200 120 72 44.7 43.0 10 10 397/387 200 120 72 50.7 44.8 10 415/405 256 150 92 62.0 56.1 (*weight including counterflange)
193
Domestic pumps with a pressure sensing electronic controller for automatic operation; the pump operates as required as a tap is opened or closed. The controller also provides protection for the pump against dry running.
TYPE
POWER
DIMENSIONS mm
Single-phase
PKm 60 - EP PKm 65 - EP PKm 70 - EP PKm 80 - EP PKm 100 - EP PKSm 60 - EP PKSm 65 - EP PKSm 70 - EP PKSm 80 - EP CPm 150 - EP CPm 158 - EP CPm 170 - EP CPm 170M -EP 2CPm 25/130N - EP 2CPm 25/140H - EP 2CPm 25/140M - EP 2CPm 80E - EP 3CPm 80E - EP 4CPm 80E - EP 3CPm 100E - EP 4CPm 100E - EP JSWm 1C - EP JSWm 1B - EP JSWm 1A - EP JSWm 10H - EP JSWm 12H - EP JSWm 15H - EP JSWm 10M - EP JSWm 12M - EP JSWm 15M - EP JSWm 3CH - EP JSWm 3CM - EP JSWm 3CL - EP PLURIJETm 3/80 - EP PLURIJETm 4/80 - EP PLURIJETm 3/100 - EP PLURIJETm 4/100 - EP
kW 0.37 0.50 0.60 0.75 1.1 0.37 0.50 0.60 0.75 0.75 0.75 1.1 1.1 0.75 1.1 1.1 0.37 0.45 0.60 0.60 0.75 0.37 0.50 0.60 0.75 0.90 1.1 0.75 0.90 1.1 1.1 1.1 1.1 0.45 0.60 0.60 0.75
HP 0.50 0.70 0.85 1 1.5 0.50 0.70 0.85 1 1 1 1.5 1.5 1 1.5 1.5 0.50 0.60 0.85 0.85 1 0.50 0.70 0.85 1 1.25 1.5 1 1.25 1.5 1.5 1.5 1.5 0.60 0.85 0.85 1
Weight1.1 kg
Typical installation
COMPONENTS
- Single-phase electropump 230V - 50Hz - EASYPRESS controller - 1.5 metre cable with Schuko plug
*maximum height approx. 15 metres
* For correct operation of the EASYPRESS device, the height of the column of water must not exceed 15 metres.
194
Pumps with pressure switch sub-assembly - ready to be connected to a pressure vessel for automatic operation.
PERFORMANCE
TYPE PORTS POWER FLOW RATE (1) Q l/min
32 40 50 50 32 40 50 50 90 100 100 140 50 60 60 100 100 45 50 50 50 50 50 80 80 80 70 120 160 50 50 50 50 50 50 80 80 80 1.4 1.5 1.8 2.2 1.4 1.5 1.8 2.2 1.8 1.4 2.2 2.2 1.0 1.4 2.2 1.4 2.0 1.2 1.4 1.8 2.0 2.5 3.0 1.4 2.0 2.5 3.0 2.0 1.4 1.2 1.4 1.8 2.0 2.4 3.0 1.4 2.0 2.5
PR COMPONENTS
SETTING (2) bar
2.8 3.0 3.2 3.6 2.8 3.0 3.2 3.6 3.2 2.8 3.6 3.6 2.2 2.8 3.6 2.8 3.5 2.6 2.8 3.2 3.4 4.0 4.5 2.8 3.5 4.0 4.5 3.5 2.8 2.6 2.8 3.2 3.4 3.8 4.0 2.8 3.5 4.0
Single-phase
PKm 60 - PR PKm 65 - PR PKm 70 - PR PKm 80 - PR PKSm 60 - PR PKSm 65 - PR PKSm 70 - PR PKSm 80 - PR CPm 158 - PR 2CPm 25/130N - PR 2CPm 25/140H - PR 2CPm 25/140M - PR 2CPm 80E - PR 3CPm 80E - PR 4CPm 80E - PR 3CPm 100E - PR 4CPm 100E - PR JSWm 1C - PR JSWm 1B - PR JSWm 1A - PR JSWm 10H - PR JSWm 12H - PR JSWm 15H - PR JSWm 10M - PR JSWm 12M - PR JSWm 15M - PR JSWm 3CH - PR JSWm 3CM - PR JSWm 3CL - PR JCRm 1C - PR JCRm 1B - PR JCRm 1A - PR JCRm 10H - PR JCRm 12H - PR JCRm 15H - PR JCRm 10M - PR JCRm 12M - PR JCRm 15M - PR
suc.
1 1 1 1 1 1 1 1 1 11/4" 11/4" 11/2" 1 1 1 1 1 1 1 1 1 1 1 1 1 1 11/4" 11/4" 11/4" 1 1 1 11/4" 11/4" 11/4" 11/4" 11/4" 11/4"
deliv.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
kW 0.37 0.50 0.60 0.75 0.37 0.50 0.60 0.75 0.75 0.75 1.1 1.1 0.37 0.45 0.60 0.60 0.75 0.37 0.50 0.60 0.75 0.90 1.1 0.75 0.90 1.1 1.1 1.1 1.1 0.37 0.50 0.60 0.75 0.90 1.1 0.75 0.90 1.1
HP 0.50 0.70 0.85 1 0.50 0.70 0.85 1 1 1 1.5 1.5 0.50 0.60 0.85 0.85 1 0.50 0.70 0.85 1 1.25 1.5 1 1.25 1.5 1.5 1.5 1.5 0.50 0.70 0.85 1 1.25 1.5 1 1.25 1.5
Single-phase pump 230V - 50Hz Pressure switch Pressure gauge 3 or 5-way brass connector 1.5 metre cable with Schuko plug
(1) Maximum flow rate with the minimum recommended pressure switch setting (2) Pressure switch recommended range
195
Small pressure sets with 24 litre spherical vessel, for automatic operation. Suitable for the supply of pressurised water in the home or in holiday homes.
suc. deliv.
kW 0.37 0.50 0.60 0.75 1.1 0.37 0.50 0.60 0.75 0.55 0.75 1.1 1.1 0.75 1.1 1.1 0.45 0.60 0.60 0.75 0.45 0.60 0.60 0.37 0.50 0.60 0.75 0.90 1.1 0.75 0.90 1.1 1.1 1.1 1.1 0.37 0.50 0.60 0.75 0.90 1.1 0.75 0.90 1.1
HP 0.50 0.70 0.85 1 1.5 0.50 0.70 0.85 1 0.75 1 1.5 1.5 1 1.5 1.5 0.60 0.85 0.85 1 0.60 0.85 0.85 0.50 0.70 0.85 1 1.25 1.5 1 1.25 1.5 1.5 1.5 1.5 0.50 0.70 0.85 1 1.25 1.5 1 1.25 1.5
l/min
32 40 50 50 50 32 40 50 50 80 90 120 150 100 100 140 60 60 100 100 60 60 100 45 50 50 50 50 50 80 80 80 70 120 160 50 50 50 50 50 50 80 80 80
min
max
1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 11/4" 11/4" 11/4" 11/4" 11/2" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 11/4" 11/4" 11/4" 1" 1" 1" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4"
1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1"
1.4 1.5 1.8 2.2 3.5 1.4 1.5 1.8 2.2 1.4 1.8 2.2 2.0 1.4 2.2 2.2 1.4 2.2 1.4 2 1.4 2.2 1.4 1.2 1.4 1.8 2.0 2.5 3.0 1.4 2.0 2.5 3.0 2.0 1.4 1.2 1.4 1.8 2.0 2.4 3.0 1.4 2.0 2.5
2.8 3.0 3.2 3.6 4.5 2.8 3.0 3.2 3.6 2.8 3.2 3.5 3.5 2.8 3.6 3.6 2.8 3.6 2.8 3.5 2.8 3.6 2.8 2.6 2.8 3.2 3.2 4.0 4.5 2.8 3.5 4.0 4.5 3.5 2.8 2.6 2.8 3.2 3.4 3.8 4.0 2.8 3.5 4.0
381 389 409 409 447 381 389 409 409 434 434 470 470 437 462 462 401 408 408 423 435 443 423 434 434 441 460 460 460 460 460 460 522 522 522 435 435 443 460 460 460 460 460 460
360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360 360
513 518 531 531 549 565 565 577 577 617 617 635 635 576 599 599 550 550 550 550 548 548 548 536 536 536 555 555 555 555 555 555 583 583 583 548 548 548 579 579 579 579 579 579
DN2
HYDROFRESH 24 SF COMPONENTS - Single-phase pump 230 V - 50 Hz - 24 litre spherical vessel - Pressure switch SQUARE-D - Pressure gauge - 3 or 5-way brass connector - 1.5 metre cable with Schuko plug
(1) Maximum flow rate with the minimum recommended pressure switch settings (2) Pressure switch recommended rate
N.B. The pre-charge of air in diaphragm tanks must be set to a value 0.2 bar lower than the minimum setting of the pressure switch.
196
DN1
Small pressure sets with 20 litre cylindrical vessel, for automatic operation. Suitable for the supply of pressurised water in the home or in holiday homes.
suc. deliv.
kW 0.37 0.50 0.60 0.75 1.1 0.37 0.50 0.60 0.75 0.55 0.75 1.1 1.1 0.75 1.1 1.1 0.45 0.60 0.60 0.75 0.45 0.60 0.60 0.37 0.50 0.60 0.75 0.90 1.1 0.75 0.90 1.1 1.1 1.1 1.1 0.37 0.50 0.60 0.75 0.90 1.1 0.75 0.90 1.1
HP 0.50 0.70 0.85 1 1.5 0.50 0.70 0.85 1 0.75 1 1.5 1.5 1 1.5 1.5 0.60 0.85 0.85 1 0.60 0.85 0.85 0.50 0.70 0.85 1 1.25 1.5 1 1.25 1.5 1.5 1.5 1.5 0.50 0.70 0.85 1 1.25 1.5 1 1.25 1.5
l/min
32 40 50 50 50 32 40 50 50 80 90 120 150 100 100 140 60 60 100 100 60 60 100 45 50 50 50 50 50 80 80 80 70 120 160 50 50 50 50 50 50 80 80 80
min
max
DN2
1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 11/4" 11/4" 11/4" 11/4" 11/2" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 11/4" 11/4" 11/4" 1" 1" 1" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4"
1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1"
1.4 1.5 1.8 2.2 3.5 1.4 1.5 1.8 2.2 1.4 1.8 2.2 2.0 1.4 2.2 2.2 1.4 2.2 1.4 2 1.4 2.2 1.4 1.2 1.4 1.8 2.0 2.5 3.0 1.4 2.0 2.5 3.0 2.0 1.4 1.2 1.4 1.8 2.0 2.4 3.0 1.4 2.0 2.5
2.8 3.0 3.2 3.6 4.5 2.8 3.0 3.2 3.6 2.8 3.2 3.5 3.5 2.8 3.6 3.6 2.8 3.6 2.8 3.5 2.8 3.6 2.8 2.6 2.8 3.2 3.2 4.0 4.5 2.8 3.5 4.0 4.5 3.5 2.8 2.6 2.8 3.2 3.4 3.8 4.0 2.8 3.5 4.0
540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540
255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 265 265 265 315 315 315 315 315 315 290 290 290 255 255 255 255 255 255 255 255 255
475 480 490 490 510 540 540 550 550 580 580 595 595 538 562 562 510 510 510 510 509 509 509 497 497 497 515 515 515 515 515 515 545 545 545 509 509 509 539 539 539 539 539 539
DN1
HYDROFRESH 24 CL COMPONENTS - Single-phase pump - 20 litre cylindrical vessel - Hose - Pressure switch SQUARE-D - Pressure gauge - 3 or 5-way brass connector - 1.5 metre cable with Schuko plug
(1) Maximum flow rate with the minimum recommended pressure switch setting (2) Pressure switch recommended rate
N.B. The pre-charge of air in diaphragm tanks must be set to a value 0.2 bar lower than the minimum setting of the pressure switch.
197
Pressure sets with 60 litre cylindrical vessel, for automatic operation. Suitable for the supply of pressurised water in the home.
PORTS
POWER
DIMENSIONS mm
suc. deliv.
kW 0.75 0.75 1.1 1.1 0.75 1.1 1.1 0.75 0.75 0.90 1.1 0.75 0.90 1.1 1.1 1.1 1.1 0.75 0.90 1.1 0.75 0.90 1.1
HP 1 1 1.5 1.5 1 1.5 1.5 1 1 1.25 1.5 1 1.25 1.5 1.5 1.5 1.5 1 1.25 1.5 1 1.25 1.5
l/min
50 90 120 150 100 100 140 100 50 50 50 80 80 80 70 120 160 50 50 50 80 80 80
min
max
DN2
1" 1" 11/4" 11/4" 11/4" 11/4" 11/2" 1" 1" 1" 1" 1" 1" 1" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4"
1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1"
2.2 1.8 2.2 2.0 1.4 2.2 2.2 2 2.0 2.5 3.0 1.4 2.0 2.5 3.0 2.0 1.4 2.0 2.4 3.0 1.4 2.0 2.5
3.6 3.2 3.5 3.5 2.8 3.6 3.6 3.5 3.2 4.0 4.5 2.8 3.5 4.0 4.5 3.5 2.8 3.4 3.8 4.0 2.8 3.5 4.0
750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750
380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380 380
630 720 735 735 678 702 702 650 655 655 655 655 655 655 685 685 685 679 679 679 679 679 679
l a
DN1
HYDROFRESH60CLCOMPONENTS - Single-phase pump - 60 litre cylindrical vessel - Hose - Pressure switchSQUARE-D - Pressure gauge - 3 or 5-way brass connector - 1.5 metre cable with Schuko plug
(1) Maximum flow rate with the minimum recommended pressure switch setting (2) Pressure switch recommended rate N.B. The pre-charge of air in diaphragm tanks must be set to a value 0.2 bar lower than the minimum setting of the pressure switch.
198
Pressure sets with 100 litre cylindrical vessel, for automatic operation. Suitable for the supply of pressurised water in the home.
PORTS
POWER
DIMENSIONS mm
DN2
suc. deliv.
kW 1.1 1.1 0.75 1.1 1.1 0.75 0.75 0.90 1.1 0.75 0.90 1.1 1.1 1.1 1.1 0.75 0.90 1.1 0.75 0.90 1.1
HP 1.5 1.5 1 1.5 1.5 1 1 1.25 1.5 1 1.25 1.5 1.5 1.5 1.5 1 1.25 1.5 1 1.25 1.5
l/min
120 150 100 100 140 100 50 50 50 80 80 80 70 120 160 50 50 50 80 80 80
min
max
11/4" 11/4"
1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1"
2.2 2.0 1.4 2.2 2.2 2 2.0 2.5 3.0 1.4 2.0 2.5 3.0 2.0 1.4 2.0 2.4 3.0 1.4 2.0 2.5
3.5 3.5 2.8 3.6 3.6 3.5 3.2 4.0 4.5 2.8 3.5 4.0 4.5 3.5 2.8 3.4 3.8 4.0 2.8 3.5 4.0
860 860 860 860 860 860 860 860 860 860 860 860 860 860 860 860 860 860 860 860 860
450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450
800 800 767 767 715 720 720 720 720 720 720 750 750 750 744 744 744 744 744 744
l a
DN1
2CPm 25/130N - 100 CL 11/4" 2CPm 25/140H - 100 CL 11/4" 2CPm 25/140M -100 CL 11/2" 4CPm 100E - 100 CL JSWm 10H - 100 CL JSWm 12H - 100 CL JSWm 15H - 100 CL JSWm 10M - 100 CL JSWm 12M - 100 CL JSWm 15M - 100 CL JSWm 3CH - 100 CL JSWm 3CM - 100 CL JSWm 3CL - 100 CL JCRm 10H - 100 CL JCRm 12H - 100 CL JCRm 15H - 100 CL JCRm 10M - 100 CL JCRm 12M - 100 CL JCRm 15M - 100 CL 1" 1" 1" 1" 1" 1" 1" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4" 11/4"
743
h
HYDROFRESH 100 CL COMPONENTS - Single-phase pump - 100 litre cylindrical vessel - Hose - Pressure switch SQUARE-D - Pressure gauge - 3 or 5-way brass connector - 1.5 metre cable with Schuko plug
(1) Maximum flow rate with the minimum recommended pressure switch setting (2) Pressure switch recommended rate N.B. The pre-charge of air in diaphragm tanks must be set to a value 0.2 bar lower than the minimum setting of the pressure switch.
199
CB2-F
CB2-VL
CB2-CP
CB2-2CP
CB2-JSW
COMBIPRESS are twin pump sets for water pressurisation, with a range to suit the requirements of domestic, civil agricultural and industrial applications.
PRINCIPLE OF OPERATION
COMBIPRESS pressure booster sets are pre-assembled ready for
installation. The sets operate as duty-assist, with one or both pumps starting automatically in succession as demand for water increases. This system is energy efficient as it only starts the pumps necessary to meet the demand. The lead pump is alternated automatically by the control panel.
USE
Clean water and chemically non aggressive liquids. - Water supply: pressure boosting for industry, condominiums, hotels, communities, water treatment plants, camping sites, schools, hospitals, barracks, etc. - Irrigation: football and sports grounds, golf courses, agriculture and artifical snow systems.
PUMPS complete with suction and delivery manifolds, ball valves and non return valves. BASE made of powder-painted metal sections. Control systems pre-installed on the delivery manifold, comprising of pressure gauge, connection for pressure vessel (not supplied), and two user adjustable pressure switches. The factory settings are shown in the following tables. CONTROL PANEL with door interlocked power switch, low voltage pressure switch control circuit, automatic pump changeover, thermal motor protector and anti-bounce system to ensure that the pumps run for an acceptable period once started. CB2m: single-phase 230 V - 50 Hz including capacitor, and with integral thermal overload protection. CB2: three-phase 230/400 V - 50 Hz up to 4 kW. 400/690 V - 50 Hz from 5.5 to 18.5 kW.
200
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Head H (metres)
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
TYPE
Single-phase CB2 - CPm 150 CB2 - CPm 158 CB2 - CPm 170 CB2 - CPm 170M CB2 - CPm 190 Three-phase CB2 - CP 150 CB2 - CP 158 CB2 - CP 170 CB2 - CP 170M CB2 - CP 190 CB2 - CP 200
kW
POWER
HP
MAXIMUM FLOW RATE* m3/h 14.4 10.8 14.4 19.2 16.8 18 l/min 240 180 240 320 280 300
-1bar 1.52.5 23 23 23 34 45
0.75 + 0.75 0.75 + 0.75 1.1 + 1.1 1.1 + 1.1 1.5 + 1.5 2.2 + 2.2
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
201
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
TYPE
Three-phase CB2 - CP 220C CB2 - CP 220B CB2 - CP 220A CB2 - CP 220AH
kW
POWER
HP
-2bar 12 23 2.53.5 34
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
202
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Head H (metres)
1 pompa
2 pompe
Flow rate Q
Flow rate Q
TYPE
Single-phase CB2 - CPm 25/160B CB2 - CPm 25/160A CB2 - CPm 25/200B Three-phase CB2 -CP 25/160B CB2 - CP 25/160A CB2 - CP 25/160AR CB2 - CP 25/200B
kW
POWER
HP
MAXIMUM FLOW RATE* m3/h 24 26.4 26.4 26.4 l/min 400 440 440 440
-2bar 12 1.52.5 23 34
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
203
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Head H (metres)
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Head H (metres)
1 pompa
2 pompe
Flow rate Q
Flow rate Q Tolerance of the performance curves according to EN ISO 9906 App. A.
TYPE
Single-phase CB2 - 2CPm 25/130N CB2 - 2CPm 25/140H CB2 - 2CPm 25/140M CB2 - 2CPm 25/160B Three-phase CB2 - 2CP 25/130N CB2 - 2CP 25/140H CB2 - 2CP 25/140M CB2 - 2CP 25/160B CB2 - 2CP 25/160A CB2 - 2CP 32/200C
kW
POWER
HP
MAXIMUM FLOW RATE* m3/h 12 10.8 15 18 19.2 27.6 l/min 200 180 250 300 320 460
0.75 + 0.75 1.1 + 1.1 1.1 + 1.1 1.5 + 1.5 2.2 + 2.2 3+3
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
204
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Head H (metres)
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q Tolerance of the performance curves according to EN ISO 9906 App. A.
TYPE
Three-phase CB2 - 2CP 32/200B CB2 - 2CP 32/210B CB2 - 2CP 32/210A CB2 - 2CP 40/180C CB2 - 2CP 40/180B CB2 - 2CP 40/180A
kW
POWER
HP
MAXIMUM FLOW RATE* m3/h 27.6 26.4 26.4 38.4 48 48 l/min 460 440 440 640 800 800
4+4 5.5 + 5.5 7.5 + 7.5 4.0 + 4.0 5.5 + 5.5 7.5 + 7.5
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
205
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Head H (metres)
1 pompa
2 pompe
Flow rate Q
Flow rate Q
TYPE
Single-phase CB2 - 3CPm 80E CB2 - 3CPm100E CB2 - 4CPm 80E CB2 - 4CPm100E
kW
POWER
HP
MAXIMUM FLOW RATE* m3/h 7.2 12 7.2 10.8 l/min 120 200 120 180
-1bar 23 23 34 34
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
206
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Flow rate Q
TYPE
Single-phase CB2 - 3CRm 80 CB2 - 3CRm 100 CB2 - 4CRm 80
kW
POWER
HP
MAXIMUM FLOW RATE* m3/h 7.2 12 7.2 l/min 120 200 120
-1bar 23 23 34
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
207
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Head H (metres)
1 pompa
2 pompe
Flow rate Q
Flow rate Q
TYPE
Single-phase CB2 - JSWm 10M CB2 - JSWm 12M CB2 - JSWm 3CM CB2 - JSWm 3BM Three-phase CB2 - JSW 3CM CB2 - JSW 3BM CB2 - JSW 3AM CB2 - JSW 3AL
kW
POWER
HP
MAXIMUM FLOW RATE* m3/h 9.6 9.6 12 14.4 14.4 19.2 l/min 160 160 200 240 240 320
0.75 + 0.75 0.90 + 0.90 1.1 + 1.1 1.5 + 1.5 2.2 + 2.2 2.2 + 2.2
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
208
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
TYPE
Single-phase CB2 - JCRm 10M CB2 - JCRm 12M
kW
POWER
HP
-1bar
-2bar
9.6 9.6
160 160
46 50
23 2.53.5
1.52.5 23
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
209
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q Tolerance of the performance curves according to EN ISO 9906 App. A.
TYPE
Three-phase CB2 - F 32/200C CB2 - F 32/200B CB2 - F 32/200A CB2 - F 40/200B CB2 - F 40/200A CB2 - F 50/200C
kW
POWER
HP
MAXIMUM FLOW RATE* m3/h 54 60 60 84 84 204 l/min 900 1000 1000 1400 1400 3400
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
210
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Head H (metres)
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Head H (metres)
1 pompa
2 pompe
Flow rate Q
Flow rate Q
TYPE
Three-phase CB2 - F 50/200B CB2 - F 50/200A CB2 - F 50/250D CB2 - F 50/250C CB2 - F 50/250B CB2 - F 50/250A
kW
POWER
HP
MAXIMUM FLOW RATE* m3/h 204 216 108 108 120 120 l/min 3400 3600 1800 1800 2000 2000
-2bar 34 45 34 45 56 6.57.5
20 + 20 25 + 25 12.5 + 12.5 15 + 15 20 + 20 25 + 25
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
211
Head H (metres)
Flow rate Q
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
TYPE
Three-phase CB2 - F 65/200B CB2 - F 65/200A
kW
POWER
HP
-1bar 34 3.54.5
-2bar 2.53.5 34
15 + 15 18.5 + 18.5
20 + 20 25 + 25
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
212
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
TYPE
Single-phase CB2 - VLm 2/7 CB2 - VLm 2/11 CB2 - VLm 2/15 CB2 - VLm 2/18 Three-phase CB2 - VL 2/7 CB2 - VL 2/11 CB2 - VL 2/15 CB2 - VL 2/18
kW
POWER
HP
MAXIMUM FLOW RATE* m3/h 7.8 7.8 7.2 7.2 l/min 130 130 120 120
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
213
Head H (metres)
Head H (metres)
1 pompa
2 pompe
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Head H (metres)
1 pompa
2 pompe
Flow rate Q
Flow rate Q
Head H (metres)
1 pompa
2 pompe
Flow rate Q Tolerance of the performance curves according to EN ISO 9906 App. A.
TYPE
Single-phase CB2 - VLm 4/7 CB2 - VLm 4/11 CB2 - VLm 4/15 CB2 - VLm 4/18 Three-phase CB2 - VL 4/7 CB2 - VL 4/11 CB2 - VL 4/15 CB2 - VL 4/18 CB2 - VL 4/22
kW
POWER
HP
MAXIMUM FLOW RATE* m3/h 13.2 13.2 12 10.8 10.8 l/min 220 220 200 180 180
0.75 + 0.75 1.1 + 1.1 1.5 + 1.5 1.8 + 1.8 2.2 + 2.2
* Indicates the maximum flow rate of the two pumps, for the minimum setting pressure of the pressure switch - 2 -
214
DN1 DN1
h a b
h a b
CB2 - CP
CB2 - 2CP
DN2
DN1
h b
CB2 - 3-4CP
TYPE Single-phase CB2 - CPm 150 CB2 - CPm 158 CB2 - CPm 170 CB2 - CPm 170M CB2 - CPm 190 CB2 - CPm 25/160B CB2 - CPm 25/160A CB2 - CPm 25/200B CB2 - 2CPm 25/130N CB2 - 2CPm 25/140H CB2 - 2CPm 25/140M CB2 - 2CPm 25/160B CB2 - 3CPm 80E CB2 - 3CPm 100E CB2 - 4CPm 80E CB2 - 4CPm 100E Three-phase CB2 - CP 150 CB2 - CP 158 CB2 - CP 170 CB2 - CP 170M CB2 - CP 190 CB2 - CP 200 CB2 - CP 220C CB2 - CP 220B CB2 - CP 220A CB2 - CP 220AH CB2 - CP 25/160B CB2 - CP 25/160A CB2 - CP 25/160AR CB2 - CP 25/200B CB2 - 2CP 25/130N CB2 - 2CP 25/140H CB2 - 2CP 25/140M CB2 - 2CP 25/160B CB2 - 2CP 25/160A CB2 - 2CP 32/200C CB2 - 2CP 32/200B CB2 - 2CP 32/210B CB2 - 2CP 32/210A CB2 - 2CP 40/180C CB2 - 2CP 40/180B CB2 - 2CP 40/180A PORTS
DN1 DN2
11/2" 11/2" 11/2" 2" 2" 2" 2" 2" 100 100 100 100 100 2" 2" 2" 2" 2" 11/2" 2" 2" 2" 2" 2" 3" 3" 3" 3" 3" 4" 100 4" 4" 11/2" 11/2" 11/2" 11/2" 11/2"
11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 80 80 80 80 80 11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2"" 11/2 11/2" 11/2" 2" 2" 2" 2" 2" 3" 80 3" 3" 11/2" 11/2" 11/2" 11/2" 11/2"
a 520 520 520 615 615 615 615 615 700 700 700 700 700 615 615 615 615 615 520 615 615 615 615 615 700 700 700 700 700 700 700 520 520 520 520 520
b 560 560 560 625 625 625 625 625 1000 1000 1000 1000 1000 645 645 645 645 645 600 595 596 670 625 910 910 910 920 920 920 980 980 980 600 596 595 670
c 620 620 620 630 630 630 630 630 780 780 780 780 780 630 630 630 680 620 630 630 630 630 630 780 780 780 895 895 895 780 780 780 620 630 630 630
DIMENSIONS mm d e 255 160 160 255 255 160 280 190 280 280 190 190 300 190 300 300 190 430 220 430 220 430 220 430 220 430 220 320 180 320 180 320 180 320 180 350 200 300 155 330 170 170 350 170 340 190 385 130 400 200 400 400 200 200 430 200 430 430 200 420 210 420 420 210 420 210 300 155 350 170 170 330 170 340 190
kg f 450 450 450 480 480 480 520 520 520 650 650 650 650 650 480 480 480 480 530 420 455 445 495 490 600 600 600 590 590 590 610 610 610 420 445 455 495 g 500 500 500 500 500 500 500 700 700 700 700 700 500 500 500 500 500 500 500 500 500 700 700 700 700 700 700 700 700 500 500 500 500 500 h 305 305 305 370 370 370 370 370 560 560 560 560 560 370 370 370 370 370 305 370 370 370 370 370 565 565 565 565 565 565 565 565 305 305 305 305 305 1~ 45.0 45.0 65.0 65.0 77.0 70.0 70.0 85.5 51.0 67.5 67.5 77.5 51.0 67.5 67.5 77.5 3~ 43.8 45.5 64.3 64.3 76.0 80.0 173.0 175.0 181.0 181.0 69.0 69.0 70.0 83.0 50.5 67.0 67.0 77.0 80.0 119.0 125.0 156.0 163.0 175.0 185.0 195.0 -
215
g d
DN2
DN2
h b
h b
CB2 - 3-4CR
CB2 - JSW
g g d
DN2 DN2
DN1
DN1
h b a
h b
CB2 - JCR
CB2 - F
TYPE Single-phase CB2 - 3CRm 80 CB2 - 3CRm100 CB2 - 4CRm 80 CB2 - JSWm 10M CB2 - JSWm 12M CB2 - JSWm 3CM CB2 - JSWm 3BM CB2 - JCRm 10M CB2 - JCRm 12M Three-phase CB2 - JSW 3CM CB2 - JSW 3BM CB2 - JSW 3AM CB2 - JSW 3AL CB2 - F 32/200C CB2 - F 32/200B CB2 - F 32/200A CB2 - F 40/200B CB2 - F 40/200A CB2 - F 50/200C CB2 - F 50/200B CB2 - F 50/200A CB2 - F 50/250D CB2 - F 50/250C CB2 - F 50/250B CB2 - F 50/250A CB2 - F 65/200B CB2 - F 65/200A
PORTS
DN1 DN2
11/2" 11/2" 1/2 11/2"" 11/2" 11/2" 2" 2" 2" 2" 2" 11/2" 11/2" 11/2" 4" 4" 100 4" 4" 4" 125 125 125 125 125 125 125 150 150 150
11/2" 11/2" 1/2 11/2"" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 11/2" 3" 3" 80 3" 3" 3" 100 100 100 100 100 100 100 125 125 125
a 520 520 520 520 520 520 520 520 520 520 520 520 700 700 700 700 700 800 800 800 800 800 800 800 800 800 800
b 600 596 595 630 630 630 710 710 710 710 710 700 700 700 910 910 910 920 920 920 1200 1200 1200 1200 1200 1200 1200 1300 1300 1300
c 620 630 630 630 620 620 620 620 620 620 620 620 620 780 780 780 895 780 895 1330 1330 1330 1330 1330 1330 1330 1330 1330
DIMENSIONS mm d e 300 155 350 170 170 330 170 340 220 220 340 340 220 400 230 400 230 400 230 400 230 400 230 350 210 210 350 350 210 440 230 440 230 440 230 440 230 440 230 450 310 450 310 450 310 450 330 450 330 330 450 330 450 330 520 320 520 320 520 320
kg f 420 445 455 400 400 400 425 425 425 425 425 420 420 420 660 660 660 660 660 725 725 725 770 770 770 770 770 800 800 800 g 500 500 500 500 500 500 500 500 500 500 500 500 700 700 700 700 700 700 800 800 800 800 800 800 800 800 780 780 780 h 305 305 305 305 305 305 305 305 305 305 305 565 565 565 565 565 700 700 700 700 700 700 700 700 700 1~ 51.0 67.5 67.5 48.0 48.0 78.5 78.5 41.0 41.0 3~ 76.5 76.5 78.5 78.5 161.0 173.0 181.0 182.0 189.0 383.0 415.0 440.0 398.0 408.0 442.0 468.0 455.0 475.0
216
DN1
DN1
g d
DN2
DN1
h a b
CB2 - VL
TYPE Single-phase CB2 - VLm 2/7 CB2 - VLm 2/11 CB2 - VLm 2/15 CB2 - VLm 2/18 CB2 - VLm 4/7 CB2 - VLm 4/11 CB2 - VLm 4/15 CB2 - VLm 4/18 Three-phase CB2 - VL 2/7 CB2 - VL 2/11 CB2 - VL 2/15 CB2 - VL 2/18 CB2 - VL 4/7 CB2 - VL 4/11 CB2 - VL 4/15 CB2 - VL 4/18 CB2 - VL 4/22 2" 2" 2" 2" 2" 2" 2" 2" 2"
PORTS
DN1 DN2
b 700 700 700 700 700 700 700 700 700 700
c 835 908 938 1000 835 880 880 880 938 1000
DIMENSIONS mm d e 500 130 500 140 500 140 500 140 500 500 130 500 140 500 140 140 500 140 500 140
kg f 765 838 868 943 765 810 810 810 868 943 g 350 350 350 350 350 350 350 350 350 350 h 370 370 370 370 370 370 370 370 370 370 1~ 65.3 76.0 78.0 80.0 65.3 75.0 77.0 79.0 3~ 63.8 71.0 74.0 76.0 63.8 70.0 73.0 75.0 87.0
217
Asynchronous single-phase electric motors, high quality, robust and with high efficiencies.
RATED POWERS AT 50 Hz 0.25 2.2 kW (0.33 3 HP) 2 pole 0.37 1.5 kW (0.50 2 HP) 4 pole LIMITS OF USE Rated voltage 5% Environment temperature up to +40 C Altitude up to 1000 metres a.s.l. CONSTRUCTION AND SAFETY STANDARDS EN 60034-1 IEC 34-1 CEI 2-3
CE I 1110
the motor casing is made of die-cast aluminium with a top terminal box containing the capacitor and power cable connections. the stator pack is made of magnetic sheet metal with a low loss figure. the stator is machine wound using class H double insulated wire with the head precision tied and shaped. Resin impregnation is carried out in a continuous automated process using class F polyester resin for reliable insulation and optimum heat transmission. MOTOR CASING: aluminium SHIELDS: die-cast aluminium. SHIELD: fan end in technopolymer for motor H 56. FAN: in glass-filled thermoplastic. ROTOR: die-cast, dynamically balanced, with shielded bearings, greased for life. TERMINAL BOX: with cable clamp. CAPACITOR: permanent, to standard VDE-IMQ. INSULATION: class F. PROTECTION: IP 44 complying with IEC 34-5 BALANCING: complying degree N of standard IEC 34-14. PAINTING: the surface protection of the motor is obtained through a process of pickling, phosphating, passivation and a two coat electrostatic paint, oven cured. Km 1: single-phase 230 V - 50 Hz.
MOTOR: The asynchronous single-phase motors of the Km1 series are of closed type, with external ventilation and permanent capacitor, suitable for continuous duty.
OPTIONS ON REQUEST
218
TECHNICAL CHARACTERISTICS
TYPE Rated power Revs Rated current A Condenser capacity F Power factor cos Yield Static torque Rated torque Static current Rated current J WEIGHT
kW
HP
1/min
kgm2
kg
2 POLE SINGLE-PHASE - 230 V - 50 Hz Km1 - 56 A/2 0.25 0.33 2730 Km1 - 63 B/2 0.37 0.50 2730 Km1 - 71 A/2 0.37 0.50 2800 Km1 - 71 B/2 0.55 0.75 2800 Km1 - 71 C/2 0.75 1 2800 Km1 - 80 B/2 1.1 1.5 2800 Km1 - 80 C/2 1.5 2 2800 Km1 - 90 S/2 1.5 2 2850 Km1 - 90 LB/2 2.2 3 2840 4 POLE SINGLE-PHASE - 230 V - 50 Hz Km1 - 71 B/4 Km1 - 80 A/4 Km1 - 80 B/4 Km1 - 90 S/4 Km1 - 90 LA/4 0.37 0.55 0.75 1.1 1.5 0.50 0.75 1 1.5 2 1380 1400 1400 1420 1420
8 12.5 10 20 25 35 45 45 50
14 20 25 31.5 40
DIMENSIONS
FRAME SIZE B3 (IM 1001)
l e e
hd
ha
p n d
ga
bc c b bb
k ba
aa a ab f
s t la
ga
m1
t1
s1
TYPE
DIMENSIONS mm
c
36 40 45 45 45 50 50 60 56 56 56
2 Pole Km1-56 A/2 Km1-63 B/2 Km1-71 A/2 Km1-71 B/2 Km1-71 C/2 Km1-80 B/2 Km1-80 C/2 Km1-90 S/2 Km1-90 LB/2
4 Pole a aa ab b ba bb bc 90 20 110 71 20 90 10.5 100 22 120 80 23.5 98 9 112 23 134 90 24.5 110 10 Km1-71 B/4 112 23 134 90 24.5 110 10 112 23 134 90 24.5 110 10 Km1-80 A/4 125 27.5 152 100 32 124 12 Km1-80 B/4 125 27.5 152 100 32 124 12 125 27.5 152 100 32 124 12 Km1-90 S/4 140 30 170 100 32.5 125 12.5 Km1-90 LA/4 140 30 170 125 32.5 150 12.5 140 30 170 125 32.5 150 12.5
d
9 11 14 14 14 19 19 19 24 24 24
e
20 23 30 30 30 40 40 40 50 50 50
f
3 4 5 5 5 6 6 6 8 8 8
ga
10.2 12.5 16 16 16 21.5 21.5 21.5 27 27 27
h
56 63 71 71 71 80 80 80 90 90 90
ga
ha
8 8 8 8 8
hd
121 152
he
65 91
k
7 7 7 7 9 9 9 9 9 9
l
209 243 243 243
la
8 9 9 9 9
m
100 115 130 130 130
m1
65 75 85 85 85
n
80 95 110 110 110
n1
p1
s
7 9 9.5 9.5 9.5
s1
M5 M5
t
3 3
t1
2.5
14 181
2.5 49.5 61 61 61 69 69 69 75 75 75
10 202.5 122.5 10 202.5 122.5 10 202.5 122.5 10 218.5 128.5 10 218.5 128.5 10 218.5 128.5
279 10.5 165 100 130 279 10.5 165 100 130 299 10.5 165 100 130 297 10 322 10 322 10 165 115 130 165 115 130 165 115 130
80 200 120 11.5 M6 3.5 80 200 120 11.5 M6 3.5 80 200 120 11.5 M6 3.5 95 200 140 11.5 M8 3.5 95 200 140 11.5 M8 3.5 95 200 140 11.5 M8 3.5
219
he
he
z
45
ACCESSORIES
SPHERICAL TANK
TYPE 24 SF
Maximum working pressure 8 bar. Replaceable diaphragm in butyl rubber.
FITTING
CAPACITY 24 litres
1"
CYLINDRICAL TANKS
TYPE 24 CL 60 CL 100 CL 200 CL 300 CL
Maximum working pressure 10 bar. Replaceable diaphragm in butyl rubber.
FITTING
VERTICAL TANKS
TYPE 8 VT 18 VT 60 VT 100 VT 200 VT 300 VT 500 VT
Maximum working pressure 10 bar. Replaceable diaphragm in butyl rubber.
FITTING
CAPACITY 8 litres 18 litres 60 litres 100 litres 200 litres 300 litres 500 litries
SPHERICAL KIT
TYPE KS 24
24 litre spherical tank pressure gauge 0 6 bar 5-way fitting - 1" gas pressure switch SQUARE D
Maximum working pressure 8 bar. Replaceable diaphragm in butyl rubber.
220
ACCESSORIES
CYLINDRICAL KIT
TYPE KC 24
20 litre cylindrical tank pressure gauge 0 6 bar 5-way fitting - 1" gas pressure switch SQUARE D hose 1" gas (600 mm)
Maximum working pressure 10 bar. Replaceable diaphragm in butyl rubber.
TYPE KC 60
60 litre cylindrical tank pressure gauge 0 6 bar 5-way fitting - 1" gas pressure switch SQUARE D hose 1" gas (600 mm)
Automatic air feeders suitable for maintaining the air cushion in pressure vessels without diaphragm
PRESSURE SWITCHES
TYPE FSG2 FYG 22 FYG 32 PM/5 PM/5 SK(1)
* Adjustable (1) Approved pressure switch
MANUFACTURER
SQUARE D SQUARE D SQUARE D ITALTECNICA ITALTECNICA
STANDARD SETTING* 1.4 2.8 bar 5.4 7.0 bar 8 10.5 bar 1.4 2.8 bar 1.4 2.8 bar
221
ACCESSORIES
PRESSURE GAUGES
TYPE MC 6 MR 6 MR 10
FITTING
1/4" - central 1/4" - radial 1/4" - radial
DIAMETER 50 mm 63 mm 63 mm
3 - 5 WAY FITTINGS
TYPE R 3 - 3 way R 5 - 5 way
R 3: three-way fittings in moulded brass with 1" gas.connections R 5: five-way fittings in moulded brass with 1" gas and 1/4" gas connections.
HOSES
TYPE TF 5 TF 6 TF 10
PIPE 1" 1" 1" FITTINGS 1" X 1" 1" X 1" 1" X 1" LENGTH 500 mm 600 mm 1000 mm
Hoses with 1" gas male/female fittings, in non-toxic EPDM rubber reinforced on the outside with blue spiral galvanised steel wire suitable for cold water. Maximum working pressure 10 bar.
1"
Hoses with 1" gas male/female fittings, in non-toxic EPDM rubber reinforced on the outside with blue spiral galvanised steel wire suitable for cold water. Maximum working pressure 10 bar.
222
ACCESSORIES
*ELECTRONIC PUMP CONTROLLERS execution
TYPE
EKO EASYPRESS
VOLT 230 10% Hz 50/60
approved
CURRENT max 6 A FITTINGS 1 x 1 FLOW RATE 8 m3/h
The pressure generated by the pump must be minimum 2.5 bar and maximum 10 bar. The column of water between the appliance and the highest user must not exceed 6 metres. Liquid temperature up to +60C. Protection IP 65.
TYPE
EASYPRESS
Hz 50/60
CURRENT max 8 A
FITTINGS 1 x 1
The pressure generated by the pump must be minimum 3 bar and maximum 10 bar. The column of water between the appliance and the highest user must not exceed 15 metres. Liquid temperature up to +65C. Protection IP 65.
TYPE
MAXI EASYPRESS
Hz 50/60
CURRENT max 16 A
The pressure generated by the pump must be minimum 3 bar and maximum 10 bar. The column of water between the appliance and the highest user must not exceed 15 metres. Liquid temperature up to +65C. Protection IP 65.
TYPE
EASYPRESS VARIO
Hz 50/60
CURRENT max 16 A
Electronic device with possibility of manually regulating the system pressure from 3 to 6.5 bar (complete with pressure gauge). For the system pressure regulated at 3 bar the pressure generated by the pump must be minimum 4.5 bar and maximum 12 bar and the column of water between the appliance and the highest user must not exceed 12 metres; for the system pressure regulated at 6.5 bar the pressure generated by the pump must be minimum 8 bar and maximum12 bar and the column of water between the appliance and the highest user must not exceed 45 metres. Liquid temperature up to +65C. Protection IP 65.
* Electronic devices for starting (when the tap is turned on) and stopping (when the tap is turned off) single-phase pumps. In the event of lack of water, they automatically stop the pump.
223
ACCESSORIES
FLOATS
TYPE 0315/3 0315/5 0315/10
With H07 RN-F cable: With PVC cable:
LENGTH
3 metres 5 metres 10 metres
CABLE
H07 RN-F or PVC H07 RN-F or PVC H07 RN-F or PVC floats with single function (emptying), with double watertight protection chamber and 10 A switch. floats with dual function (emptying and filling). Double watertight protection chamber and 10 A switch.
LENGTH
3 metres 5 metres 10 metres
CABLE
H07 RN-F or PVC H07 RN-F or PVC
LENGTH
3 metres 5 metres
floats with single function (emptying), with simple protection and 20 A switch. floats with dual function (emptying and filling). With simple protection and 20 A switch.
LENGTH
3 metres 5 metres 10 metres
CABLE
H07 RN-F H07 RN-F H07 RN-F
LENGTH
3 metres 5 metres 10 metres
Floats with emptying function, with double watertight protection chamber and 10 A switch.
CABLE
H07 RN-F H07 RN-F H07 RN-F
LENGTH
3 metres 5 metres 10 metres
224
ACCESSORIES
FOOT VALVES
TYPE VF 0.5 VF 0.75 VF 1 VF 1.25 VF 1.5 VF 2
Brass foot valves, stainless steel suction filter.
FITTINGS
1/2" 3/4"
CHECK VALVES
TYPE VR 0.5 VR 0.75 VR 1 VR 1.25 VR 1.5 VR 2
Brass check valves.
FITTINGS
1/2" 3/4"
FITTINGS
FITTINGS 65 mm 80 mm
225
ACCESSORIES
FILTER HOLDERS WITH PLASTIC HEAD
TYPE MEDIUM MEDIUM JUNIOR JUNIOR SENIOR SENIOR CARTRIDGE HEIGHT THREADED FITTINGS
3/4"
1"
3/4"
1"
3/4"
1"
Maximum working pressure 5 bar (at temp. +20C) Maximum temperature + 45C (at pressure 2 bar). - Filter holder for RL, FA and LA cartridges.
1"
3/4"
Maximum working pressure 10 bar (at temp. +20C) Maximum temperature + 50C (at pressure 3 bar). - Filter holder for RL and FA (K 0.75, K 1) cartridges.
MOBILE FILTER
TYPE DEPURAL 10
CARTRIDGE HEIGHT 10" CARTRIDGE RL 10, FA 10, HA 10
Head in ABS for use with foodstuffs. Cup in AS for use with foodstuffs. It is suitable for connection by means of a hose to any tap in order to supply filtered water, free from impurities.
FILTER HOLDER
F K DEPURAL 10
226
ACCESSORIES
POLYESTER FILTER CARTRIDGES
TYPE RL 5 RL 7 RL 10
FILTRATION 50 50 50 HEIGHT 5" 7" 10"
HEIGHT 10
HEIGHT 10
227
ACCESSORIES
FLAT PVC HOSE
TYPE TP 1.25 TP 1.50 TP 2.00 TP 2.50 TP 3.00
FITTING LENGTHS 5 - 10 - 20 metres 5 - 10 - 20 metres 5 - 10 - 20 metres 5 - 10 - 20 metres 5 - 10 - 20 metres
Plasticized flat delivery hose, complete with PVC hosetail, resistant to abrasion and to atmospheric agents. Ideal for irrigation even with fertilisers and for draining water in combination with DRAINAGE PUMPS.
SUCTION HOSE
TYPE GARDEN KIT
FITTING LENGTH 7 metres
1"
Hose, complete with foot valve. RECOMMENDED FOR PORTABLE GARDEN PUMPS, BETTY TYPE
1" x 1"
Mechanical flow meter for private use, suitable for measuring diesel fuel. RECOMMENDED FOR USE WITH TYPE CK PUMPS
ELBOW FITTING
3/4"
1"
228
ACCESSORIES
STRAIGHT HOSETAIL FITTINGS
TYPE RP 0.75 RP 1 RP 1.25 RP 1.5 RP 2
Nylon fittings.
HOSETAIL
25 mm 30 mm 35 mm 40 mm 50 mm
THREADED FITTING
3/4"
HOSETAIL
25 mm 30 mm 35 mm 40 mm 50 mm
THREADED FITTING
3/4"
PAINT AEROSOL
TYPE SPRAY 1
COLOUR pedrollo blue CAPACITY 400 ml
229
ACCESSORIES
CAPACITORS FOR SURFACE PUMPS
TYPE 06 F 10 F 12 F 14 F 16 F 16 F 20 F 20 F 25 F 25 F 30 F 30 F 31 F 40 F 45 F 50 F 55 F 60 F 70 F 80 F 80 F
CAPACITY 6.3 F 10 F 12.5 F 14 F 16 F 16 F 20 F 20 F 25 F 25 F 30 F 30 F 31.5 F 40 F 45 F 50 F 55 F 60 F 70 F 80 F 80 F VOLTAGE 450 V 450 V 450 V 450 V 450 V 250 V 450 V 250 V 450 V 250 V 450 V 250 V 450 V 450 V 450 V 450 V 450 V 450 V 450 V 450 V 250 V FREQUENCY 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz
type F= FASTON
230
ACCESSORIES
BEARINGS
TYPE 6201 ZZ 6201 ZZ 6202 ZZ 6203 6203 ZZ 6203 ZZ 6203 2RS 6204 ZZ 6204 ZZ 6205 ZZ 6206 ZZ 6304 ZZ 6304 ZZ 6304 2RS 6306 ZZ 6307 ZZ 6308 ZZ 6310 ZZ 7203 B 7303 B
INTERNAL PLAY Normal C3 (increased) Normal Normal Normal C3 (increased) Normal Normal C3 (increased) Normal C3 (increased) Normal C3 (increased) Normal C3 (increased) C3 (increased) C3 (increased) C3 (increased) Normal Normal DIMENSIONS 12 x 32 x 10 mm 12 x 32 x 10 mm 15 x 35 x 11 mm 17 x 40 x 12 mm 17 x 40 x 12 mm 17 x 40 x 12 mm 17 x 40 x 12 mm 20 x 47 x 14 mm 20 x 47 x 14 mm 25 x 52 x 15 mm 30 x 62 x 16 mm 20 x 52 x 15 mm 20 x 52 x 15 mm 20 x 52 x 15 mm 30 x 72 x 19 mm 35 x 80 x 21 mm 40 x 90 x 23 mm 40 x 90 x 23 mm 17 x 40 x 12 mm 17 x 47 x 14 mm
MATERIALS
Rotating ring Grafite Grafite Grafite Grafite Grafite Graphite Grafite Grafite Grafite Grafite Grafite Elastomer NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR NBR Spring AISI 304 AISI 304 AISI 304 AISI 304 AISI 304 AISI 316 AISI 316 AISI 316 AISI 316 AISI 316 AISI 316 AISI 316 Ceramica Ceramica Ceramica Ceramica Ceramica Ceramic Ceramica Ceramica Ceramica Ceramica Ceramica
SHAFT 12 mm 13 mm 14 mm 12 mm 14 mm 18 mm 18 mm 20 mm 24 mm 32 mm 38 mm
AR
PNL
FN
RN
MATERIALS
Rotating ring Graphite Carburundum Graphite Carburundum AISI 431 Graphite Elastomer NBR NBR NBR NBR NBR NBR NBR Spring AISI 304 AISI 304 AISI 304 AISI 316 AISI 316 AISI 316 AISI 431 AISI 316 AISI 316 AISI 316 Ceramica Ceramic Ceramica Widia Graphite Ceramic
SHAFT 12 mm 13 mm 16 mm 20 mm 17 mm 14 mm 14 mm
MG
FN DV
Carburundum Carburundum
231
ACCESSORIES
CABLE FOR LEVEL PROBES
TYPE CSL
SECTION 1.5 mm
2
232
ACCESSORIES
CABLES WITH PLUG FOR SINGLE-PHASE SURFACE PUMPS
TYPE H05 VV-F (PVC) H07 RN-F (NEOPRENE)
CABLE SECTION 3 x 0.75 mm2 3 x 1 mm
2
FANS
TYPE 14VN05 14VN06 14VN07 14VN08 14VN08L 14VN09 14VN10 14VN1062 14VN13
DIMENSIONS 85 x 18 mm 104 x 21 mm 125 x 24 mm 138 x 27 mm 138 x 27 mm 162 x 32 mm 176 x 38 mm 155 x 37 mm 165 x 45 mm SHAFT DIAMETER 12 mm 12 mm 14.5 mm 20 mm 20 mm 24 mm 28 mm 28 mm 36 mm
233
ELECTRIC PANEL
FOR 4 SINGLE-PHASE BOREHOLE PUMPS
TYPE QEM 033 QEM 050 QEM 075 QEM 100 QEM 150 QEM 200 QEM 300
MOTOR POWER kW HP 0.25 0.37 0.55 0.75 1.1 1.5 2.2 0.33 0.50 0.75 1 1.5 2 3 CAPACITOR F 12.5 16 20 30 40 50 75 RATED CURRENT 3.5 4.5 6 7 11 13 18 A A A A A A A
- Single-phase 220 230V 50 Hz The control panel is supplied in a flame retardant plastic box; it protects the pump against overloads and short circuits and may be connected to a float or a pressure switch. COMPONENTS: Isolating switch with fuse Start-stop switch Terminals for connecting the pump and a float or a pressure switch Thermal protection with manual reset Green pump running lamp For a correct choice of control panel, ensure that the current absorbed by the pump corresponds to the values in the table.
RATED CURRENT 1.7 A 2 A 2.5 A 3.9 A 4.8 A 7 A 9 A 11.5 A 15.5 A 21.5 A 23.5 A 27.5 A 31.5 A 36 A 45 A
54 A
30
40
68 A
- Three-phase 380 415V 50 Hz The control panel is supplied in a flame retardant plastic box; it protects the pump against overloads and short circuits and has a selector for manual or automatic operation (with float, pressure switch, etc.). COMPONENTS: Isolating switch with fuse Selector for manual or automatic operation Three-pole contactor Adjustable three-pole thermal relay with manual reset Terminals for connecting the pump and a float or a pressure switch Green pump running lamp. For a correct choice of control panel, ensure that the current absorbed by the pump corresponds to the values in the table.
234
ELECTRIC PANEL
FOR 4 SINGLE-PHASE PUMPS WITH LEVEL PROBES
TYPE QSM QSM QSM QSM QSM QSM QSM 033 050 075 100 150 200 300
MOTOR CURRENT kW HP 0.25 0.37 0.55 0.75 1.1 1.5 2.2 0.33 0.50 0.75 1 1.5 2 3 CAPACITOR F 12.5 16 20 30 40 50 75 RATED CURRENT 3.5 4.5 6 7 11 13 A A A A A A
17.5 A
- Single-phase 220 230V 50 Hz The control panel is supplied in a flame retardant plastic box; it protects the pump against overloads and short circuits. It has a selector for manual or automatic operation (with float, pressure swich, etc.) and may be connected to level probes that protect the pump against dry operation. COMPONENTS: Isolating switch with fuse Selector for manual or automatic operation Three-pole contactor Thermal protection with manual reset Capacitor Terminals for connecting the pump, a float or a pressure switch, and the level probes Green pump running lamp Red cut-out warning lamp Level probes (the CSL type cables for connection of the probes are excluded) For a correct choice of control panel, ensure that the current absorbed by the pump corresponds to the values in the table.
Level probes
- Three-phase 380 415V 50 Hz The control panel is supplied in a flame retardant plastic box; it protects the pump against overloads and short circuits. It has a selector for manual or automatic operation (with float, pressure swich, etc.) and may be connected to level probes that protect the pump against dry operation. COMPONENTS: Isolating switch with fuse Selector for manual or automatic operation Three-pole connector Adjustable three-pole thermal relay with manual reset Terminals for connecting the pump, a float or a pressure switch and the level probes Green pump running lamp Red cut-out warning lamp Level probes (the CSL type cables for connection of the probes are excluded) For a correct choice of control panel, ensure that the current absorbed by the pump corresponds to the values in the table.
235
ELECTRIC PANEL
CURRENT SENSING - FOR 4 AND 6 BOREHOLE PUMPS
TYPE EVOLUTION MONO EVOLUTION TRI/1 EVOLUTION TRI/2
ADJUSTABLE POWER kW HP
from 0.37 to 2.2 from 0.5 to 3 from 0.55 to 7.5 from 0.75 to 10 from 7.5 to 10 from 10 to 15
RATED CURRENT
from 2 to 16 A from 2 to 15 A from 16 to 24 A
- Single-phase 220 230V 50 Hz - Three-phase 380 415V 50 Hz Contained within a flame retardant enclosure, the Evolution offers protection against overloads and short circuits, and monitors the power factor (cos) to protect the pump against dry running without the need for level probes. There is also a connection provided for an external float or pressure switch. COMPONENTS:
Isolating switch with fuse Start-stop switch with door interlock Trimmer controls for user adjustment of the electronic protectors Three-pole contactor (three-phase versions only) Terminals for connecting the pump Terminals for connecting a float or pressure switch External display with warning led.
N.B. For single-phase models, the capacitor is not included and should be selected to suit the pump. For a correct choice of control panel, ensure that the current absorbed by the pump corresponds to the values in the table.
- Single-phase 220 230V 50 Hz Contained within a flame retardant IP55 enclosure, the panel protects the pump against overloads and short circuits. It also has provision for the connection of the thermal cut-outs provided in the winding of drainage pump models VXCm30, PVXCm30, MCm30, PMCm30. COMPONENTS: Isolating switch with fuse Start-stop switch Three-pole contactor Adjustable three-pole thermal relay with manual reset Capacitor Terminals for connecting the pump Terminals for connecting pump thermal protection circuits Green pump running lamp Red cut-out warning lamp. COMPONENTS ON REQUEST:
Auxiliary contacts for level alarm Red high level warning lamp Output (230V) for external warning lamp/
sounder. For a correct choice of control panel, ensure that the current absorbed by the pump corresponds to the values in the table.
- Three-phase 380 415V 50 Hz Contained within a flame retardant IP55 enclosure, the panel protects the pump against overloads and short circuits. It has a selector for manual or automatic (floatswitch) operation and provision for the connection of the thermal protection circuit provided in pump models VXC, PVXC, MC, PMC. COMPONENTS: Isolating switch with fuses Selector for manual or automatic operation Three-pole contactor Adjustable three-pole thermal relay with manual reset Terminals for connecting the pump Terminals for connecting the pump thermal protection circuit (VXC, PVXC, MC, PMC) Terminals for connecting the float Green pump running lamp For a correct choice of control panel, ensure that the current absorbed by the pump corresponds to the values in the table.
236
CABLE SIZES FOR SUBMERSIBLE MOTORS DIMENSIONAMENTO DEI CAVI PER MOTORI SOMMERSI
SINGLE-PHASE 230 V - 50 Hz
MOTOR POWER
kW HP
4x1
0,33 0,50 0,75 1 1,5 2 3 70 60 45 35 25
4 x 1.5
105 90 70 50 35 30
4 x 2.5
170 140 110 85 60 45 30
4x4
4x6
4 x 10
4 x 16
180 140 95 75 50
305 200
THREE-PHASE 230 V - 50 Hz
MOTOR POWER
kW HP
4x1
100 83 65 48
4 x 1.5
152 126 99 72 53
4 x 2.5
255 210 165 120 88 60 47
4x4
4x6
4 x 10
4 x 16
4 x 25
4 x 35
4 x 50
4 x 70
0,37 0,55 0,75 1,1 1,5 2,2 3 4 5,5 7,5 9,2 11 13 15 18,5 22 30
THREE-PHASE 400 V - 50 Hz
MOTOR POWER
kW HP
4x1
300 250 195 145 105 70 55 40
4 x 1.5
4 x 2.5
4x4
4x6
4 x 10
4 x 16
4 x 25
4 x 35
4 x 50
4 x 70
0,37 0,55 0,75 1,1 1,5 2,2 3 4 5,5 7,5 9,2 11 13 15 18,5 22 30
570 425
237
100
50
30 20
10
4.6
3 2
0.5
0.3 0.2
0.1
0.01 8 0.5 16 1 30 2 50 3 83 5 160 10 330 20 500 30 830 50 1660 100 3330 5000 200 300 8330 Q l/min 500 Q m3/h
Flow rate Q
The data in the table refer to cold water and to liquids with the same kinematic viscosity, for new cast iron pipes. The losses (hv) shown in the table must be multiplied by: 0.8 for new steel pipes, 1.25 for old and slightly rusty iron pipes, and 1.7 for heavily corroded pipes - for which the reduction in actual bore should also be considered. EXAMPLE: Flow rate data Q = 500 l/min, new steel pipe 80 mm, pipe length 50 m. Find the flow rate on the horizontal axis and continue vertically until you meet the line DN 80 mm. The load losses can then be read on the vertical axis. hv = 4.6 m every 100 m of pipe. hv1 = 4.6 x 0.8 = 3.68 m/100 (steel pipe). To consider the real length of the pipe: hv2 = 3.68 x 50:100 = 1.84 m (for 50 m of pipe). The speed of flow is determined considering the point of intersection which is between the oblique lines with value 1.5-2 m/sec. So in the case considered that gives: C = 1.7 metres/sec.
238
LENGTH
millimetre mm 1 10 1000 25.4 304.8 914.4 centimetre cm 0.1 1 100 2.54 30.48 91.44 metre m 0.001 0.01 1 0.0254 0.3048 0.9144 inch in 0.0394 0.3937 39.3701 1 12 36 foot ft 0.0033 0.0328 3.2808 0.0833 1 3 yard yd 0.0011 0.0109 1.0936 0.0278 0.3333 1
1 kilometre = 1000 metres = 0.62137 miles - 1 mile = 1609.34 metres = 1.60934 kilometres
VOLUME
cubic metre m3 1 0.001 1 x 10-6 0.00455 0.00378 0.0283 litre l 1000 1 0.001 4.546 3.785 28.317 millilitre ml 1 x 10 1000 1 4546 3785 28.317
6
imperial gallon Imp. gal 220 0.22 2.2 x 10-4 1 0.8327 6.2288
WEIGHT
kilogram kg 1 0.454 50.802 1000 1016 907.2 pound lb 2.205 1 112 2204.6 2240 2000 hundredweight cwt 0.0197 0.0089 1 19.684 20 17.857 ton t 0.001 4.54 x 10-4 0.0508 1 1.0161 0.9072 long ton tn 9.84 x 10-4 4.46 x 10-4 0.05 0.9842 1 0.8929 short ton sh. tn 0.0011 5.0 x 10-4 0.056 1.1023 1.102 1
kiloPascal
bar
kilogram force square centimetre kgf/cm2 1.02 x 105 1.02 x 105 1.02 1 0.0703 0.0305 0.1 0.0014 0.0345
pound force square inch psi 1.45 x 10-4 0.145 14.5 14.22 1 0.433 1.42 0.019 0.491
foot of water
metre of water
millimetre mercury
inch mercury
ft H20 3.35 x 10-4 0.335 33.52 32.81 2.31 1 3.28 0.045 1.133
239
NOTES
240