Beruflich Dokumente
Kultur Dokumente
JOB RESPONSIBILITIES : 1. To prepared the daily production report. 2. To prepare inward material note. 3. To plan & arrange the raw material. 4. Production planning & control. 5. Check on line component. 6. Monitoring the consumable items. 7. Attend the customer complaints & corrective action. 8. Development activity. 9. Jig fixtures maintenance. 10. To take follow-up of breakdown maintenance. 11. To send the rejection material to party. 12. To prepare monthly report & analysis. 13. T P.M. activities to be carried out. 14. To prepare Q.C.P.C. ( Once in a year ) 15. To prepare delivery challans. 16. To prepare P.D.I. Report. 17. Collect drawing of component & relation gange from BAL. 18 To supervise on workers on the Shop floor 19. Training & development of workers. 20. To ensure that the daily targeted production is achieved. 21. To ensure good housekeeping & cleanliness in the shop. 22. To attend & participate in the various meetings conduced by the Superiors. 23. To maintain discipline at the Shop floor. 24. Take efforts to minimize in process rejection.
25. Give training to newly appointed workers. 26. Give multi skilling training to permanent operators.
27. Prepare the man power management for production. 28.To release the labors payment. 29. Daily production as per schedule. 30. Required consumable material & its provision. 31.Daily dispatch.
Designation. Department
JOB RESPONSIBILITIES : 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Received customers complaints and solve them. If any problems exists at the shop floor, solve them. Implement new developments in the production. Over look on production report, process parameter and other reports and give correct instructions. Support to TPM related work. Guide & supervise the Production Supervisors. Responsible for the entire shop floor activities & the daily production . To arrange the daily ,weekly &/or the monthly meetings of the Supervisors. To report to the Management about the production activities on regular basis. To report to the top Management about the any discrepancy observed at the shop floor. To manage the shop floor activities in such a manner that the production is not stopped for any reason whatsoever.
5.
6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
6.
7. 8. 9.
Designation
Dept.
: Engineer - Design
: Design / QS.
JOB RESPONSIBILITIES : 1. 2. 3. 4. 5. 6. 7. 8. 9. To draw a drawing in auto cad / solid edge. To draw a tool design in solid edge and components surface modeling. To prepare the documentation of development items ( i.e. V.Q.M.S. ) To control new modified and development drawing. To co-ordinate the weekly & monthly meeting of the group. To attend the internal quality audit of every department & each unit. To give departments non conformities and observation. To handle and maintain all the quality system and ISO documents. To masteries documentation of drawings in Rucha Group.