Beruflich Dokumente
Kultur Dokumente
clino phon
Nurse Call System with Two-Way Speech Facility
clino opt
Nurse Call System with Audio-Visual Signalling
clino call
Paging System
clino soft
Software Solutions for the Nursing Staff
clino com
Accounting System for TV and Telephone
clino serv
Maintenance and Service Package
Albert Ackermann GmbH + Co. KG D-51641 Gummersbach Tel. (02261) 83-0 Fax 83-539 www.ackermann.com A member of Novar plc
Call cancel push button to further call push buttons Call push button (bed 1) Electronic module without bed databus Call push button (bathroom/WC)
A ERMANN ACK
..........
.. 01....1 ....
. A 00.........
Bed databus
Information display
Corridor databus
Power supply
Power supply
System overview clino opt 99 Symbols key / table of contents System description clino opt 99 Zone controller Configuration module Interface unit Paging interface unit Printer interface PC interface Power supply Cover and mounting kit UPS module 24 V UPS module 230 V Electronic module for patient room Electronic module for duty room Direction lamps Information Display Ceiling mounting set Zone indicator lamp Corridor lamp Databus terminator and splitter Display module Speech module Call module Call module with push button and socket Patient handset Wall interface electronic Headphones Call push button Call push button for doctor call Call push button with socket Call push button with sockets Pull cord Pneumatic call push button Call unit with diagnostic sockets Pear push button, multiple push button Auto-release plug system Noise level sensor Pneumatic pear push button Call/cancel push button Cancel push button Cancel push button Touch-sensitive push button Backbox for touch-sensitive push button Master station Databus connection unit Duty selection module Duty room unit Display module, speech module Mounting frames for cover plates Standard plate Radio unit Programme selection switch Flush mounting backbox Cavity wall backbox Surface mounting socket Additional fastening for top-hat rail mounting Light bulb Part numbers
2 3 4 8 8 8 9 9 9 10 10 11 12 14 15 15 16 16 17 18 18 20 20 20 21 22 23 23 24 24 24 25 25 25 26 27 28 28 28 29 29 30 30 30 32 33 33 33 34 36 36 37 37 38 38 38 39 39 41
Zone controller
Electronic module
TV R
LICHT
Patient handset
DUTY
Cover plate
System overview
The nurse call system clino opt 99 combines intelligent network users with interactive data communication. The system is able to handle up to 16 zone controllers, each of which can be subdivided into 3 zones. Up to 127 patient rooms (electronic modules) can be controlled via the corridor databus of the zone controller. It should be noted that other direct users, such as interface units or electronic modules with direction lamps, are treated like patient rooms. Up to 255 active units, such as electronic modules, display modules or call modules can be used for each zone. Each active unit represents a network user for the system and can be identified by means of an 8-digit alpha-numeric text.
System characteristics
A distinguishing feature of the system clino opt 99 is its quick and easy installation. It is based on modular technology. The electronic modules can be replaced without entering the patients room. Calls and presences can be displayed in any room, e.g. in the duty and patients room and can also be answered from there with the appropriate equipment. Additionally, a nurse call guide system can be installed by using direction lamps. The system is equipped with two presence circuits. By activating a presence push button the call from the room concerned is cancelled, the call transfer is activated and the emergency call prepared. Calls from other rooms can then be audibly indicated in this room and displayed by using a display module. Calls from other zones can be displayed by means of zone indicator lamps and display modules. Any zone linking occurs by means of an additional duty selection module.
System structure
clino opt 99 system is an integrated system based on a controller unit, electronic modules and room equipment. The wiring consists of the corridor databus and the room databus (ZB-A, ZB-B), whereby the room databus is a twisted pair. A 6-core cable is required for supplying power, the speech and data lines, where as 4-core cable is sufficient for systems without a two-way speech facility. A suitable cable must be used, taking into account the provision of power in conjunction with the length of the cable as well as the number of modules connected. The electronic modules which are mounted outside the rooms also serve as distribution points for the room wiring and as sockets for the printed circuit boards. The power is supplied by a 24V/DC power supply.
Electronic module
The electronics required for call identification as well as the logging of calls are to be found in the electronic module, which is used as the distribution point for the room wiring. Electronic modules with integrated corridor lamp can be used for the whole system. Configuration data is stored in the electronic modules memory module and is, thereby, still available if the electronic module is replaced. For duty rooms, special electronic modules with additional memory for configured zone linking data are used.
Room equipment
Various devices can be installed in the rooms, for example, call modules, call push buttons, pear push buttons and pull cords for making calls, as well as cancel push buttons for cancelling calls. Patient handsets are also an option. In addition to their call function, these also enable patients to listen to radio. The information in the nurse call system can be shown on display modules. Calls are indicated according to their urgency. If there are no calls in the system, then presences are indicated. Use of additional speech modules enables queued calls to be addressed. Calls which have been addressed can be cancelled by remote control. Emergency calls cannot be cancelled by remote control. In the corridors, calls are visually indicated as text on the information displays and optically indicated by the corridor lamps. The following call types are shown. Type of call As per DIN VDE 0834-1 : 2000-04 nurse call (abbr: call) WC call (no information) emergency call alarm call (no information) Visual signals
Patient calls: normal call bathroom/WC call Priority call Staff calls: emergency call doctor call bathroom/WC emergency call Further calls: diagnostic call remind call telephone call fault
permanent light red permanent light red (optional: and permanent light - white -) flashing light - red flashing light red permanent light green and/or yellow quickly flashing light red , permanent light green and/or yellow flashing light red (optional: and flashing light white -), permanent light green and/or yellow flashing light red flashing light green permanent light telephone lamp white permanent light - red 5
Coupling
The clino opt 99 Nurse Call System can be connected to the clino call paging system via the paging interface unit. This transfers existing calls on the nurse call system to the pocket pager of staff via the paging system, indicating type of call, room number and possibly bed identification. Additionally, internal signals, such as fire alarms or technical alarms, can be connected via interface units. It is possible to connect the system to an Instabus EIB (European InstaBus).
Safety
In the case of power failure, calls are stored for approximately 24 hours. As soon as the power is switched on again, presences and calls which were set prior to power failure are indicated. In the case of failure of the zone controller, the system operates in an emergency mode, which involves the functions normal and emergency calls, cancellation, presence indication and call transfer to rooms where presence has been set, as well as the visual indication of the corridor lamps. The zone controller monitors all active units and displays any malfunctions as a collective message or as individual messages on the information display. The lamp outputs of the electronic modules are short-circuit protected. All electronic modules are fitted with a self-healing fuse. This not only protects the electronic modules but also the equipment in the room. An auto-release plug mounted on the pear or multiple push button as well as on the patient handset prevents damage to the cord. The electrical safety and EMV requirements of all the system components are in accordance with the CE directives. The IP protection classes indicated in the catalogue refer to the completely assembled appliance including cover plate and mounting frames.
Order No.
Zone controller without audio appropriate connection board Zone controller with audio appropriate connection board Additional equipment: fastening for top-hat rail mounting (page 39)
A2 Z1 B2 Z2
72640 Z1
88899 A
Configuration module
for easy and quick setting up of the room identification and system parameters. The values are picked off from the documents or from printed room number lists by means of a barcode reading device. The configuration module leads the user through the different menus via the 2x8 digit LC-Display. Dimensions: H = 345 mm, W = 235 mm, D = 55 mm Configuration module English other languages 72649 AA on request
Interface unit
for connection of the clino opt 99 system to an existing clino opt 90 nurse call system or other alarm systems equipped with dry contacts. Dimensions: Installation: Colour: Protection: H = 182 mm, W = 110 mm, D = 34 mm surface mounting or top-hat rail mounting white RAL 9016 IP 40 72641 A2 72641 Z1
72641 Z1
Interface unit appropriate connection board Additional equipment: fastening for top-hat rail mounting (page 39)
TOP
OBEN
88899 A
1 2
Order No.
Paging interface unit for connection to clino call HL appropriate connection board Connection to other paging systems Additional equipment: fastening for top-hat rail mounting (page 39)
TOP
OBEN
on request 88899 A
Printer interface
for connection of the clino opt 99 system to a printer. Data transmission can be carried out via either an RS 422 or an RS 232C (serial interface). Dimensions: Installation: Colour: Protection: H = 182 mm, B = 110 mm, D = 34 mm surface mounting or top-hat rail mounting white RAL 9016 IP 40 72643 I1 72643 Z1
72643 Z1
Printer interface for connection to a printer appropriate connection board Additional equipment: fastening for top-hat rail mounting (page 39)
TOP
OBEN
88899 A
1 2
PC interface
for connection of the clino opt 99 system to a PC for call logging. Data transmission can be carried out via either an RS 422 or an RS 232C (serial interface). Dimensions: Installation: Colour: Protection: H = 182 mm, W = 110 mm, D = 34 mm surface mounting or top-hat rail mounting white RAL 9016 IP 40 72643 H1 72643 Z1
72643 Z1
PC interface appropriate connection board Additional equipment: fastening for top-hat rail mounting (page 39)
TOP
OBEN
88899 A
1 2
89954 R2
89954 R3
Protective cover and mounting kit - for 5 A power supply - for 10 A power supply - for 20 A power supply 89954 MA 89954 MB 89954 MC
10
89954 C6
89954 C7
89954 C8
11
Central devices
Order No.
7608903
76089 AC
12
Electronic module for patient rooms with corridor lamp (including lamps) without bed databus - without presence 2 - with presence 2 appropriate connection board, grey RAL 7040 appropriate connection board, white RAL 9016 Electronic module for patient rooms with corridor lamp (including lamps) with bed databus and audio - without presence 2 - with presence 2 appropriate connection board, grey RAL 7040 appropriate connection board, white RAL 9016 Electronic module for patient rooms with corridor lamp (including lamps) with bed databus and Radio, audio - without presence 2 - with presence 2 appropriate connection board, grey RAL 7040 appropriate connection board, white RAL 9016 Electronic module for patient rooms without corridor lamp, cover plate white Ral 9016: without bed databus, with presence 2 appropriate connection board, white RAL 9016 Electronic module for patient rooms without corridor lamp, cover plate white Ral 9016: with bed databus, audio and presence 2 appropriate connection board, white RAL 9016 Accessories: Protective hood for electronic module Name plate holder for electronic module 14
72570 A2 72570 Z2
2-way direction lamp (including lamps) direction lamp right/left appropriate connection board, grey RAL 7040 appropriate connection board, white RAL 9016
Direction lamp with arrow (including lamps): direction lamp left direction lamp right appropriate connection board, grey RAL 7040 appropriate connection board, white RAL 9016
15
16
17
Corridor lamp (including lamps): with 3 lamp sections (white, red, green) appropriate connection board, grey RAL 7040 appropriate connection board, white RAL 9016 Corridor lamp (including lamps): with 4 lamp sections (white, red, green, yellow) appropriate connection board, grey RAL 7040 appropriate connection board, white RAL 9016
Corridor lamp
in LED technology to connect to an electronic module without lamp. Colour: Dimensions Installation: Protection: white RAL 9016 81 mm x 81 mm in flush box, DIN 49073 IP 40
Type (including cover plate and frame): Corridor lamp with LEDs red, green 72555 B1
72555 C1
Databus terminator and splitter including connection terminals Additional equipment: suitable cover plate, white RAL 9016 suitable mounting frame (page 36)
18
Display module with call/cancel push button Additional equipment: suitable mounting frame (page 36)
Speech module
enables intercom within the clino opt 99 system. Connected to the electronic module with bed databus, the existing calls or presences which are displayed can be answered. A speech push button makes it possible to start and release a conversation and a dual speech push button controls the speech direction. Equipped with: microphone, loudspeaker, answering push button, push button for speech direction Dimensions: Installation: Colour: Protection: H = 140 mm, W = 69 mm, D = 25 mm surface mounting in combination with 2 flush boxes fastening with claws or screws white RAL 9016 IP 40 74912 A4 74912 Z1
Speech module Additional equipment: appropriate connection terminals suitable mounting frame (page 36)
Call module
for connection to the electronic module with bed databus. As an active unit the call module can be addressed with an 8-digit alpha numerical text as bed identification. Released calls can then be displayed by means of this bed identification. Equipped with: 1 LED orientation/reassurance lamp red appropriate connection terminals push button Dimensions: Installation: Protection: 71 mm x 71 mm in flush box, DIN 49073 IP 40 73071 F2 88881 K3
Call module with call push button Additional equipment: cover plate white RAL 9016 with 1 call push button red suitable mounting frame (page 36)
20
Call module with push button and socket Additional equipment: cover plate white RAL 9016 with 1 push button red suitable mounting frame (page 36)
Call module with push button and sockets Additional equipment: cover plate white RAL 9016 suitable mounting frame (page 36)
21
27
PROG
TV R
LICH T
Patient handset - with function selector radio/TV - with function selector radio/external connection Additional equipment: hook for patient handset
* The necessary connection to the nurse call system and the transmission of data, conversations and radio programmes occur via the wall interface electronics. ** In relation with wall interface electronic 73072 A2 or 73072 B2.
22
Additional equipment: Housing base unit suitable for surface mounting of wall electronic type 73072 A2 for flush mounting for cavity wall mounting Frame for flush or cavity wall mounting Material: insulating material Colour: white RAL 9016
Headphones
for patient handset and radio unit with volume control. Equipped with: 1 adjustable clip 2 ear protection sponges for headphones 3 m connection cable 1 jack plug (3.5 mm) Impedance: 32 Ohm Maximum capacity: 0.1 W Input: 0.05 W Transmission range: 40 Hz 15 kHz Weight: 61 g Headphones 89760 B
23
Call push button Additional equipment: cover plate white RAL 9016 with 1 call push button red suitable mounting frame (page 36)
Call push button for doctor call Additional equipment: cover plate white RAL 9016 with 1 doctor call push button blue suitable mounting frame (page 36)
88881 D3
Call push button with socket Additional equipment: cover plate white RAL 9016 with 1 call push button red suitable mounting frame (page 36)
24
Call push button with sockets Additional equipment: cover plate white RAL 9016 with 1 push button - red suitable mounting frame (page 36)
Pull cord
for normally closed circuits with call-circuit monitoring. Equipped with: 2 m PVC cord with red handle 1 LED reassurance lamp red Dimensions: Installation: Protection: Pull cord Additional equipment: cover plate white RAL 9016 suitable mounting frame (page 36) 71 mm x 71 mm in flush box, DIN 49073 IP 54 70045 A3 88880 A3
Additional equipment: cover plate white RAL 9016 suitable mounting frame (page 36)
88880 C3
25
Call unit with diagnostic sockets Additional equipment: cover plate white RAL 9016 suitable mounting frame (page 36)
73075 C
88912 D3
26
Pear push button for call-circuit monitoring with: 7-pole plug auto-release plug1, 3 - auto-release plug A-coded4
1 In connection with wall electronic system or auto-release plug system, page 28. 2 Other lengths on request
Multiple push button for call-circuit monitoring with: 1 light push button - yellow - 7-pole plug 1 light push button - yellow -auto-release plug, A-coded1, 4 2 light push buttons - yellow - 7-pole plug 2 light push buttons - yellow - auto-release plug, A-coded1, 4 74151 A1 74151 A4 74153 A1 74153 A4
1 In connection with wall electronic system or auto-release plug system, page 28. 2 Other lengths on request
27
Additional equipment: cover plate white RAL 9016 suitable mounting frame (page 36)
88910 N3
KE ST TE AC L F GE RU PE IT ZE ST TE F RU
RM AN N
28
Call/cancel push button Additional equipment: cover plate white RAL 9016 with 1 call push button red , 1 cancel push button green suitable mounting frame (page 36)
88882 A3
Cancel push button, presence 1 Additional equipment: cover plate white RAL 9016 with 1 cancel push button green suitable mounting frame (page 36)
Cancel push button, presence 2 Additional equipment: cover plate white RAL 9016 with 1 cancel push button yellow suitable mounting frame (page 36)
29
Cancel push button Additional equipment: cover plate white RAL 9016 with 2 cancel push buttons green and yellow suitable mounting frame (page 36)
88882 B3
71185 E2
Touch-sensitive push button with cancel sensor and LED remind lamp - green -
71185 D2
30
Order No.
Structure: desktop unit with 2 m connection cable and 8-pole plug Functions: call and status identification with following indications: zone, patient room, bed, normal call (nurse call), bathroom/WC calls, emergency call, bathroom/WC emergency call, diagnostic call, doctor call, answered call in remind mode, presence 1, presence 2, malfunction, other calls, conversation, plug release call call activation doctor call activation (types "74420 B1" and "74421 B1") call reminder function and call cancellation (types "74421 A1" and "74421 B1") selection of zone linking call answering nurse-to-nurse communication nurse/patient two-way speech simultaneous display of several calls and presences general address call to all rooms and zones general address call to presence 1 and/or presence 2 function activation (e.g., call answering, zone linking) by just touching the display screen menu index and free allocation of function push buttons ( e.g., day/night switching) Equipped with: 1 loudspeaker 1 microphone 1 call push button red with LED reassurance lamp 1 doctor call push button blue with LED reassurance lamp (types "74420 B1" and "74421 B1") 2 presence push buttons green and yellow with LED remind lamps 1 push button answer/off white with speech indication lamp 1 push button for speech direction brown 1 buzzer for call transfer 1 lit graphic LC display with touch-sensitive surface (touch screen) Master station Desktop unit without speech facility: without doctor call push button with doctor call push button Desktop unit with speech facility: without doctor call push button with doctor call push button
DUTY
32
Equipped with: 1 8-pole data plug databus connection unit Additional equipment: cover plate white RAL 9016 suitable mounting frame (page 36) 73070 A 88911 J3
Equipped with: 2 white push buttons suitable connection terminal Duty selection module Additional equipment: suitable mounting frame (page 36) 74911 B3
Equipped with: 2 LED remind lamp green and red 1 buzzer for call transfer Duty room unit Additional equipment: cover plate white RAL 9016 with 1 presence push button green and 1 acknowledge push button white (English version) suitable mounting frame (page 36) 73642 B 88882 CA
33
Equipped with: 2x8-digit alpha-numeric LCD with back light call push button cancel push button buzzer appropriate connection terminals 1 LED remind lamp - green 1 LED orientation/reassurance lamp - red Display module with call/cancel push button Additional equipment: suitable mounting frame (page 36) 74910 C2
Speech module
enables intercom within the clino opt 99 system. Connected to the electronic module with bed databus, the existing calls or presences which are displayed can be answered. A speech push button makes it possible to start and release a conversation and a dual speech push button controls the speech direction. Dimensions: Installation: Colour: Protection: 140 mm x 69 mm, D = 25 mm surface mounting in combination with 2 flush boxes claw or screw fastening. white RAL 9016 IP 40
Equipped with: microphone, loudspeaker, answering push button, push button for speech direction Speech modul Additional equipment: appropriate connection terminals suitable mounting frame (page 36) 74912 A4 74912 Z1
34
Standard plate
as per DIN 49075, suitable for all frame types (see above). Colour: white RAL 9016 Standard plate 88910 B3
36
Equipped with: 1 volume control 1 jack plug socket for the connection of dynamic headphones Radio unit Additional equipment: cover plate white RAL 9016 suitable mounting frame (page 36) 73120 H
88912 K3
Equipped with: 1 programme selection switch for 5 radio programmes Programme selection switch Additional equipment: cover plate white RAL 9016 suitable mounting frame (page 36) 73120 A
88912 H3
37
Dimensions: Colour:
38
Light bulb
for electronic modules, zone indicator lamps and direction lamps. 24 V / 3.5 W Light bulb - clear - red - green - yellow
A B C D
39
40
Part Numbers
Order No. 18971 A 18971 B 70006 B 70007 A 70045 A3 71185 D2 71185 E2 72515 A1 72515 A2 72515 A3 72515 B1 72515 B2 72515 B3 72515 C1 72515 C2 72515 C3 72515 D1 72515 D2 72515 D3 72555 B1 72555 C1 72569 C 72569 D 72569 Z1 72569 Z2 72569 Z3 72569 Z4 72570 A2 72570 C2 72570 D2 72570 Z1 72570 Z2 72571 A2 72571 C2 72571 D2 72571 Z1 72571 Z2 72572 C2 72572 D2 72572 Z1 72572 Z2 72573 A2 72573 C2 72573 D2 72574 A2 72574 B2 72574 C2 72574 Z1 72574 Z2 72640 A2 Page 38 38 25 28 25 72642 B 30 30 17 17 17 17 17 17 17 17 17 17 17 17 18 18 18 18 18 18 18 18 14 14 14 14 14 14 14 14 14, 15 14, 15 14 14 14 14 15 15 15 15 15 15 15 15 8 72643 C1 72643 H1 72643 I1 72643 Z1 72649 AA 73022 A2 73070 A 73071 D2 73071 E2 73071 F2 73072 A2 73072 B2 73075 A 73075 B 73075 C 73120 A 73120 H 73300 B7 73642 B 73642 B2 73642 C 73642 D 73642 E 74130 A1 74130 B1 74131 A1 74141 A1 74141 A3 74141 A4 74151 A1 74151 A4 74153 A1 74153 A4 74189 A 74420 A1 74420 B1 74421 A1 18 74911 B3 9 9 9 9 8 7608903 24 33 21 21 20 23 23 24 25 26 37 37 28 33 29 29 29 30 22 22 22 27 27 27 27 27 27 27 28 32 32 32 88950 A 88950 B 88956 B 23 23 23 41 88880 A3 88880 C3 88881 D3 88881 G3 88881 H3 88881 J3 88881 K3 88881 L3 88881 M3 88882 A3 88882 B3 88882 CA 88886 A 88894 A 88894 B 88894 C 88894 D 88899 A 88910 A3 88910 B3 88910 N3 88911 J3 88912 D3 88912 H3 88912 K3 88914 A3 88914 B3 88914 C3 88915 A3 88915 C3 25 25 24 24 29 21, 25 20 21, 24 29 29 30 33 14 39 39 39 39 8, 9, 39 18 36 28 33 26 37 37 36 36 36 38 38 12 74912 A4 74912 Z1 76089 AC 33 20, 34 20, 34 12 89954 C6 89954 C7 89954 C8 89954 M1 89954 MA 89954 MB 89954 MC 89954 R2 89954 R3 11 11 11 10 10 10 10 10 10 Order No. 72640 B2 72640 Z1 72640 Z2 72641 A2 72641 Z1 Page 8 8 8 8 8 Order No. 74421 B1 74652 A2 74653 A2 74910 C2 Page 32 16 16 89760 B 20, 34 89870 E1 14 23 Order No. 89450 B 89603 B1 89603 B2 Page 30 16 16
Albert Ackermann GmbH + Co. KG D-51641 Gummersbach Telefon (0 22 61) 830 . Fax (0 22 61) 8 35 39 www.ackermann.com A member of Novar plc