Sie sind auf Seite 1von 2

ELECTRONIC AUTO TAP

AUTOTAP MAKES WATER FLOWING AUTOMATIC FOR WASH BASIN/ DRINKING WATER TAP. SENSES HAND IN FRONT OF THE TAP AND AUTOMATICALLY ALLOWS WATER TO FLOW AS LONG AS HAND IS BELOW TAP. EXCELLENT DEVICE TO SAVE WATER & MAINTAIN HYGIENE.
Model AT - 01 (Battery Powered) Model AT - 02 (AC Powered)

BETTER SANIT SANITATION IMPROVES GENERAL EFFICIENCY. YOU MUST NOT IGNORE IT.

GET YOUR SELF AUTO TAP FOR EACH WASH BASIN/DRINKING WATER TAP - A SMALL INVESTMENT FOR SERVICE GOOD MANY YEARS TO COME

Product Features
Built-in high-reliability microcomputer. Meets the requirement of electric-magnetic compatibility. Water-proof box protects the electrical unit from moisture. Ultra Low-power consumption design for the battery-powered controller. Safe and convenient "touch-free"usage.

Basic Specifications
Item Power Supply Power consumption: Water Supply Pipe Size Applicable Water Pressure Applicable Water Temperature Sensing Diatance AC Powered Series AC 180242V, 60Hz 50/ Static 0. Active 6W 5W, G1/ 2" 0. 0. 03- 8MPa 050 8-30cm,Preset at 15cm Battery Powered Series R6C Alkaline batteries, 4pcs Battery service life : years.( 2 100times/ day) G1/ 2" 0. 0. 03- 8MPa 0 50 8-30cm,Preset at 15cm

FIT AUTO TAP AND MAKE WATER START / STOP FULLY AUTOMATIC FOR EACH WASH BASIN / DRINKING WATER TAP.

FIT AUTO TAP AND SAVE WATER ELECTRO ENGINEERS offers automatic tap i.e. AUTO TAP. It senses presence of the hand below the Tap and automatically allows water to flow as long as the hand is below Tap. It works on 220 V AC / 6V DC and is meant for continuous use. It consist of control unit, sensor and electromagnetic valve complete in all respect. Any plumber cant fit in any type of existing tap/new fittings.

SPEICAL FEATURES It offers comfort & convenience to the uses. Function is fully automatic, so you don't have to touch anything / anywhere. Cleanliness is maintained. Works on infrared principle, unaffected by ambient light condition and power fluctuation. Automatically allows water to flow when in hand is below Tap. This maintains hygienic condition. Manual operation is also possible during power failure with valve by pass tap. Control unit & Valve are placed below the basin hence not visible. Also wiring from the sensor to unit is not visible.
Manufactured & Marketed By :
ELECTRO

191, 1ST FLOOR, RAM KUTIA, BEHIND SHISHU RANJAN, DELHIGATE CHORAHA, UDAIPUR - 313001
PHONE : (0294) 3293216, 2410853 FAX : (0294) 2410853 E-Mail : electroengineers@hotmail.com Website : www.electroengineers.in

Das könnte Ihnen auch gefallen