Beruflich Dokumente
Kultur Dokumente
Profile chosen Yield limit Partial safety factor for material Design strength fy.d := fy.k M
N mm
2
Young's modulus
N mm
2
Iy := 7763 cm Iz := 2769 cm IT := 42 cm
4
Wy := 675 cm Wz := 231 cm
3 6
I := 328500 cm
Select CLASS of cross-section Factor from elastic to plastic section modulus if CLASS = 3 only elastic properties may be used pl.y := wenn ( CLASS = 3 , 1 , 1.14) pl.z := wenn ( CLASS = 3 , 1 , 1.50)
CLASS := 2
Design resistances of cross section Npl.d := Aprofile fy.d Mpl.y.d := pl.y Wy fy.d
HS Augsburg - civil engineering Baumgartner Str. 16, D-86161 Augsburg +49(0) 821 - 55 86 - 3171, Fax - 3913 peter.knoedel@hs-augsburg.de
System length - distance of gable ends L := 6.00m Actions from excentrically connected beam: (the moment from offset will be carried to the upper and lower parts of the member to equal parts) Vy.Ed := 200kN L = 6.00 m
Moments about major axis End moment M1 (+/-): M1.y := 0.5 Vy.Ed
hprofile + 20mm 2
M1.y = 14 kNm
M2.y := 0kNm
y = 0.000
Moment from transverse loads (positive only) bild1 Position of Maximum (dist. from M2) My.s := M2.y + ay L ay := 1.5m M3.y := 150kNm ay = 1500 mm My.s = 153.4 kNm
My.Ed := max( M1.y , M2.y , My.s y.s := wenn My.s < M1.y , see Table B.3
)
,0
y.s = 0.000
,0
y.h = 0.088
Flexural buckling about minor axis Factor for buckling length buckling length Lcr.z := z L Ncr.z.d :=
2
Bifurcation load
2 M
Npl.d Ncr.z.d
bar.z = 1.308
p :=
hprofile bprofile
p = 0.96
Buckling curve (table 6.2) - ONLY rolled sections and t,f =< 40 mm BCz := "b" if p > 1.2 "c" if p 1.2 Imperfection factor (table 6.1) z := 0.34 if BCz = "b" 0.49 if BCz = "c" z = 0.49 BCz = "c"
z = 1.627
HS Augsburg - civil engineering Baumgartner Str. 16, D-86161 Augsburg +49(0) 821 - 55 86 - 3171, Fax - 3913 peter.knoedel@hs-augsburg.de
Released by: P. Knoedel Date of release: 20.01.10 Printed: 20.01.2010 - 08:56 EC3-LTB_10-01-20.xmcd
z :=
Design buckling resistance under normal compression Nb.z.Rd := z Npl.d Nb.z.Rd = 956 kN
Elastic critical moment for lateral-torsional buckling according to DIN 18800-2 Element 311, eq. 19: c := I + 0.039 Lcr.z IT Iz
2
c = 18.2 cm
Distance of centroid from attack of transverse forces; positive, if a torsion about the centroid produces a restoring force input "t" for top, "m" for middle, "b" for bottom zp := hprofile 2 if z = "t" z := "t" zp = 115 mm
HS Augsburg - civil engineering Baumgartner Str. 16, D-86161 Augsburg +49(0) 821 - 55 86 - 3171, Fax - 3913 peter.knoedel@hs-augsburg.de
Released by: P. Knoedel Date of release: 20.01.10 Printed: 20.01.2010 - 08:56 EC3-LTB_10-01-20.xmcd
bild3 Critical Moment for LTB (DIN 18800-2 Element 311, eq. 19): Mcr.y.d := Ncr.z.d c + 0.25 zp + 0.5 zp Mcr.y.d = 342 kNm
2 2
Buckling curve (table 6.5) - ONLY rolled sections BCLT := "b" if p 2 "c" if p > 2 BCLT = "b"
LT :=
LT = 0.34
Reduction factor according to eq. (6.57) Parameters bar.LT.0 := 0.4 := 0.75 According to 6.3.2.2 (4) LTB may be ignored, if ,LT / ,LT,0 <=1 bar.LT bar.LT.0 = 2.129
According to 6.3.2.2 (4) LTB may be ignored, if M,Ed / (Mcr.y * (,LT,0)^2) <=1
HS Augsburg - civil engineering Baumgartner Str. 16, D-86161 Augsburg +49(0) 821 - 55 86 - 3171, Fax - 3913 peter.knoedel@hs-augsburg.de Released by: P. Knoedel Date of release: 20.01.10 Printed: 20.01.2010 - 08:56 EC3-LTB_10-01-20.xmcd
My.Ed
= 2.545
LT = 0.849 LT = 0.788
LT := LT + checking limits
1 LT bar.LT 1
2 2 2
LT := min LT , 1.0 ,
bar.LT
LT = 0.788
Correction factor from table 6.6 kc := 0.82 Modification factor eq. (6.58)
2 f := 1 0.5 ( 1 kc) 1 2.0 bar.LT 0.8
f := min ( f , 1)
f = 0.91
LT f
,1
LT.mod = 0.866
bild2 Design buckling resistance in bending Mb.Rd := LT.mod Mpl.y.d Mb.Rd = 215 kNm
kzy := 1 Stability check according to eq. (6.61) utilisation of flexural buckling about major axis by N
kyy := 1
HS Augsburg - civil engineering Baumgartner Str. 16, D-86161 Augsburg +49(0) 821 - 55 86 - 3171, Fax - 3913 peter.knoedel@hs-augsburg.de
Released by: P. Knoedel Date of release: 20.01.10 Printed: 20.01.2010 - 08:56 EC3-LTB_10-01-20.xmcd
utilisation of LTB by My
1.My :=
My.Ed Mb.Rd
kyy
1.My = 0.713
Stability check according to eq. (6.62) 2.My := My.Ed Mb.Rd kzy 2.My = 0.713
utilisation of LTB by My
Utilisation in cross section check (without interaction): utilisation by My: My := My.Ed Mpl.y.d My = 0.618
HS Augsburg - civil engineering Baumgartner Str. 16, D-86161 Augsburg +49(0) 821 - 55 86 - 3171, Fax - 3913 peter.knoedel@hs-augsburg.de
Released by: P. Knoedel Date of release: 20.01.10 Printed: 20.01.2010 - 08:56 EC3-LTB_10-01-20.xmcd