Beruflich Dokumente
Kultur Dokumente
CONTENTS:
Pg. 2-5: COMPOSITE VIDEO OUTPUT SIGNAL Connect to a Digital Recorder, CCTV Monitor, or TV CCTV Monitor
Time Lapse Recorder & Digital Video Recorder Pg. 6: VIDEO OUTPUT TO TV OR CABLE DISTRIBUTION NETWORK
RF Modulator
Motion Detectors
Aiphone Communication Systems 1700 130th Ave. NE Bellevue, WA 98005 (425) 455-0510 FAX: (425) 455-0071 (800) 692-0200 www.aiphone.com
Pg. 1
Video Output
With Black & White Video Systems
MK 1x3 Fixed Camera Video Sentry System Composite video output is a standard feature on the MK-1GD. MK-1GD
MK-DH
PS-1820UL 2
All MK Sets include: Audio/Video Door Station MK-1GD Master Monitor PS-1820UL Power Supply Individual Sets Include Specific door stations: MKS-1GD: MK-DH Surface mount ABS Plastic Door Station MKS-1DGV: MK-DV Vandal Resistant Surface mount Door MKS-1DGVF: MK-DVF Vandal Resistant Flush mount Door Station
Coax
MK-2MCD 2x3 Black & White PanTilt Video Sentry System Composite video output is a standard feature on the MK-2MCD. MK-2MCD 2 MK-DAC 2
Composite video output from 2-pin connector. Part #261380*.
MK-DBC
PS-1820UL
MKS-2MCD Set include: MK-DAC Audio/Video Door Station MK-2MCD Master Monitor PS-1820UL Power Supply
Pg. 2
Video Output
With Black & White Video Systems
MY PanTilt Video Sentry System Composite video output with MYW-MD/B
MK-DAC
PS-1820UL
4 Coax
MYW-MD/B Video Demodulator MY/LEF Black & White PanTilt Video Sentry System Composite video output is a standard feature on the MYW-P3L.
Monitor
MYW-P3L
Pg. 3
JB-2MD
Composite video output from Red/Brn wires of 7-Pin connector.
2 2
JB-DVF PS-1820UL
All JB Sets include: Audio/Video Door Station JB-2MD Monitor PS-1820UL Power Supply Individual Sets Include specific door stations: JBS-2AD: JB-DA Surface mount ABS Plastic Door Station JBS-2ADV: JB-DV Vandal Resistant Surface mount Door JBS-2ADVF: JB-DVF Vandal Resistant Flush mount Door Station
Pg. 4
KC-1MRD or KC-1GRD
PS-2420UL
KB 3x5 Color Video Sentry System Composite video output is a standard feature on the KB-3MRD. KB-3MRD
KB-DAR 2 KB-DAR 2
PS-2420UL
MYW-MD/B Demodulator for MY Systems KCW-D/A Demodulator for KC Systems Composite video input signal to TV To video input on a TV
Television
MYW-MD/B Demodulator for MY Systems KCW-D/B Demodulator for KC Systems Composite video input signal to RF Modulator Cable Distribution Unit Coax
Television
Television
RF Modulator
Pg. 6
KB-DAR 2 KB-DAR 2
KB-3MRD
Composite video output from Red/Brn wires of CN12 connector (incl).
PS-2420UL
2 Coax
NOTES: CCTV camera connects to the KBW-M Modulator with coaxial cable. Use the 2-conductor Aiphone wire #871802 from the KBW-M to the KB-3MRD Monitor. To turn on the CCTV camera, simply cycle to the camera position from any monitor (1, 2, or 3). Optinal motion detector can be used to activate CCTV camera. The monitor will stay on for approximately 30 seconds.
Pg. 7
MK-DBC 2 IE-JA 2
MK-2MCD
Composite video output from 2-pin connector. Part #238150*.
PS-1820UL
* Order seperately
NOTES: CCTV camera connects to the MYW-MD/B Modulator with coaxial cable. Use the 2-conductor Aiphone wire #841802 from the MYW-MD/B to the MK-2MCD Monitor. To turn on the CCTV camera, simply cycle to the camera position from any monitor (1 or 2). The monitor will stay on for approximately 2-1/2 minutes. The audio door station and the video camera are on separate channels. There cannot be communication with the audio door and viewing from the CCTV camera at the same time.
MY with IE Series: Up to two CCTV cameras can be connected to the MYW-P3CB adaptor. Use MYH-CU monitors with an IE series handset system (IE-1GD, IE-2AD, IE-8MD).
Pg. 8
KC-1MRD or KC-1GRD
MKW-DK
2
KC-DAR * Any device that provides a momentary dry closure can be used to activate the video door station. For example, a Photoelectric beam, pressure pad in front of an entrance, etc. The MKW-DK can be installed inside the 1-gang box used to mount the unit, or inside the wall. PS-2420UL
KB-3HRD
KB-3MRD 2
2
KB-DAR-M*
2
PS-2420UL
* The KB-DAR-M is equipped with an input for a motion detector, or any device providing a momentary dry contact closure. The remote device will activate the call-in signal just as if pressing the call button on the door station.
Pg. 9
MKW-DK
MK-1GD
PS-1820UL
MK-DV * Any device that provides a momentary dry closure can be used to activate the video door station. For example, a Photoelectric beam, pressure pad in front of an entrance, etc.
SYSTEM LAYOUT EXAMPLE: MK-Series Black & White PanTilt Video System MK-2HCD
Detection Device (Requires N/O contacts. N/A from Aiphone)
MK-2MCD
MKW-DK
2
MK-DBC PS-1820UL
Pg. 10
BLACK & WHITE FIXED CAMERA VIDEO DOOR STATION Surface Mount Zinc Cast Video Door Station (MK-DV) Flush Mount Stainless Steel Video Door Station (MK-DVF)
Pg. 11
KB/KC COLOR TILT VIDEO DOOR STATIONS Flush Mount Stainless Steel Housing with Hood for KC-DAR or KB-DAR (KA-FSH*) Surface Mount Stainless Steel Housing (KA-DGR PANEL*) * KC-DAR and KB-DAR are sold separately.
Semi-flush mount with KA-FSH Hood portion is separate and can be omitted if not needed.
Panel Only: 8-1/2 x 6-1/16 x 2-5/8 (recessed in wall) With Hood: 8-5/8 x 6-1/4 x 3 (top), 3/4 (bottom)
Pg. 12