Beruflich Dokumente
Kultur Dokumente
4.
Which of the following is wrong ? (a) PMMA is called Plexiglas (b) PTFE is called teflon (c) SBR is natural rubber (d) LDPE is called low density polythene Which of the fllowing pairs is not correctly matched ? (a) Terlenecondensation polymer of terephthlic acid and ethylene glycol (b) Teflonthermally stable cross linked polymer of phenol and formaldehyde (c) PerspexA homopolymer of methyl methacrylate
(d) Synthetic rubberA copolymer of butadiene and styrene
5. 6.
(c) Neoprene
7.
Which of the following is an addition homopolymer ? (a) Polythene (b) Teflon (c) PVC
8.
Which of the fllowing is not a condensation (step growth) polymer ? (a) Melamine-formaldehyde resin (b) Bakelite (c) Polythene (d) Polyester An example of a condensation homopolymer is (a) Bakelite (b) Melamine-formaldehyde resin (c) Alkyd resin (d) Perlon or Nylon-6 Low density polythene is prepared by (a) Free radical polymerization (c) Anionic polymerization
9.
10.
11. 12.
Artificial silk is a
(a) Polypeptide (b) Polysaccharide (c) Polythene (d) Polyvinyl chloride
Among the following, the weakest interparticle forces of attraction are present in (a) Thermosetting polymers (b) Thermoplastic polymers (c) Fibers (d) Elastomers Which of the followin is not a thermosettng polymer ?
(a) alkyd resin (b) Bakelite (c) Melmac (d) SBR
13. 14.
The processs of vulcanization was introduced by (a) Charles' Goodyear (b) Kolbe (c) Wohler Vulcanized rubber restists (a) Wear and tear due to friction (c) High temperature The repeating structral unit in neoprene is (a) Chloroprene (b) Chloropicrin (c) Chloroethene (d) Chlorotrifluoroethylene
(d) Zeigher
15.
16.
17. 18.
A polymer which has better light tranmission properties than even glass is (a) Perspex (b) Bakelite (c) Buna-S (d) Poly(ethyl acrlate) If N1, N2, N3 ..... Ni are the number of molecules with molecular massed M1, M2, M3 ..... Mi respectively then the number average molecular mass (M n ) is given by
(a)
19.
Ni M i2 Ni Mi
(b)
Ni Mi Ni
(c)
Mi2 Ni
(d)
Ni Mi Mi
20. 21.
22.
The catalyst used in the manufacture of polyethelene by Ziegler metod is (a) Titanium tetrachloride and triphenyl aluminium (b) Titanium tetrachloride and tri-ethylaluminium (c) Titanium dioxide
(d) Titanium isopropoxide
23.
Which one of the following is used to make 'nonstick' cookware ? (a) PVC (b) Polystrene
(c) Poly (ethylene terephthalate) (d) Polytetrafluoroethylene
24.
(d) Acrylonitrile
25.
P.V.C. is formed by polmerisation of (a) 1-Chloroethene (b) Ethene (c) Propene Teflon, styron and neoprene are all (a) Copolymers (b) Condensation polymers (c) Homopolymers (d) Monomers Interparticle forces present in Nylon-66 are (a) van der Waals' (b) Hydrogen bonding (c) Dipole-dipole interaction
(d) None of the above
(d) 1-Chloropropane
26.
27.
28.
CH 3 | Monomer of C CH 2 is | CH 3
(a) 2-Methylpropene (b) Styrene (c) Propylene (d) Ethene
29.
30.
Which one of the following monomers gives the polymer neoprene on polymerization ?
(a) CH2 = CHCl (b) CCl2 = CCl2 (c) CH2 = CCl CH = CH2 (d) CF2 = CF2
31. 32.
A polymer which is used as a suture, i.e. for stitching of wounds after operations is
(a) PHBV (b) Nylon-2-Nylon-6 (c) Dextran (d) Dacron
CH 2 CH CH CH 2
(b)
| C6 H 5 CH 2 CH CH 2 CH
| | C6 H 5 C6 H 5 CH CH 2 CH 2 CH
(c)
| C6 H 5
| C6H 5
(d)
| C6 H 5
| C6 H 5