Beruflich Dokumente
Kultur Dokumente
TARGET LOAD DATA TRANSMITTER CHARACTERISTICS (Note: Tx(downlink)=Node b; Tx(uplink)=UE Maximum Tx Power (W) Maximum Tx Power (dBm) Antenna Gain (dBi) Cable Loss (dB) Body Loss (dB) EIRP (dBm) 384
DOWNLINK 0.7 80 49.03089987 15.5 3.48 0 68.01089987 -174 5 -169 -103.156688 3 10 -100.156688 3 -98.3923391 4 -104.392339 0 0 6 166.403239 95 7 3.52 7.3 1 0 160.103239
Thermal Noise Density (dBm/Hz) Receiver Noise Figure Receiver Noise Density Receiver Noise Power Interference Margin Processing Gain Interference Power Receiver Interference Margin Total Effective Noise + Interference (dBm) RECEIVER CHARACTERISTICS AND Required Eb/No (dB) MARGIN (Note: Rx(downlink)=UE; Receiver Sensitivity (dBm) Rx(uplink)=Node B Antenna Gain (dBi) Cable Loss (dB) Fast-Fading Margin (dB) Maximum Path Loss Coverage Pobability (%) Log-normal Fading Constant (dB) Propagation Model Exponent Log-normal Fading Margin (dB) Soft handover Gain (dB), multicall In Car Loss or Indorr Loss (dB) Allowed Propagation Loss for Cell Range (dB) RANGE (Okumura-Hata Path Loss Model) Carrier Frequency (MHz) Nobe B Antenna Ht. (m) Parameter A Parameter B UE Ht. (m) a(Hm) Medium a(Hm) Large
4.535893863 4.40545216
-131.9 15.5 3.48 3 163.8891 95 7 3.52 7.3 4 0 160.5891 LEGENDS: 2100 25 46.3 33.9 2 1.52622035 1.04544667
4.26393155 4.13389614
PHILIPPINES: For Node B Tx and Rx Frequency Bands: TX to RX freq. Separation: Channel Arrangement:
ITU Region 3 1900-1920 MHz 2010-2025 MHz 3,84 Mcps TDD Option Channel Spacing;
Channel Raster:
Channel Number;
The carrier frequency is designated by the UTRA absolute radio the UARFCN in the IMT2000 band is defined in the general case Nt = 5 * F 0.0 </= F </= 3276.6 MHz where F is the carrier frequency in MHz. Additional channels applicable to operation in the frequency ba defined via the following UARFCN definition: Nt = 5 * (F 2150.1 MHz) 2572.5 MHz </= F The 10 additional UARFCN for operations in frequency band def 2112, 2137, 2162, 2187, 2212, 2237, 2262, 2287, 2312, 2337. 30 dB less than -79 dB
UL and DL Transmission UL and DL Transmission No TX-RX frequency separation is required as Time Division Duplex (TDD) is employed. Each TDMA frame consists of 15 timeslots where each timeslot can be allocated to either transmit or receive. 3,84 Mcps TDD OptionThe nominal channel spacing is 5 MHz, but this can be adjusted to optimise performance in a particular deployment scenario. 200kHz In addition a number of additional centre frequencies are specified according to table 5.1, which means that the centre frequencies for these channels are shifted 100 kHz relative to the general raster.
nated by the UTRA absolute radio frequency channel number (UARFCN). The value of band is defined in the general case as follows: 0.0 </= F </= 3276.6 MHz cy in MHz. e to operation in the frequency band defined in sub-clause 5.2(d) for 3.84 Mcps are FCN definition: 2572.5 MHz </= F</= 2617.5 MHz operations in frequency band defined in sub-clause 5.2(d) for 3.84 Mcps are hence: , 2237, 2262, 2287, 2312, 2337.
Allowed Propagation Loss Downlink Range Uplink Range CELL RANGE Allowed Propagation Loss Downlink Range Uplink Range CELL RANGE
175.0829529
160.103239