Beruflich Dokumente
Kultur Dokumente
Triseal Hubodometers are the toughest, most accurate and dependable units on the market. An exceptional design, engineered for maintenance-free operation and lower over-all costs.
First quality design and performance. Advanced design prevents orbiting or spinning. Long life gears and bushings, fewer moving parts than most other units. Large, easy-to-read numbers for accurate readings. Provides great performance in heavy use and in all weather conditions. Full range of applications available. Models available in miles or kilometers. Guaranteed to + or 2% accuracy. Records both forward and reverse rotation of the wheel. Factory sealed, making it tamper-proof and moisture free. Robust construction makes the unit steady and balanced, even on rough roads. Tough polycarbonate cover, resists breakage and remains clear. Durable steel housing for greater dependability. Universal mounting stud (1/2) applies directly to H type hubcaps or to available brackets. Guaranteed against mechanical failure for 2 years, 200,000 miles.
BRACKETS
BOLT CIRCLE HEIGHT TRISEAL PART STUD SIZE
9.00 x 20, 10-22.5 STD 10.00 x 20 11-22.5 STD 10.00 x 22 11-24.5 STD 11.00 x 20 12-22.5 12.50 x 22.5 12.75 x 22.5 22.5 LOW PROFILE 24.5 LOW PROFILE 24.5 LOW PROFILE HT 275/80R-22.5 HT 275/80R22.5 STD 275/80R-24.5 STD 285/75R-22.5 285/75R-24.5 HT 285/75R-24.5 STD 295/75R-22.5 HT 295/75R-22.5 STD 295/75R-24.5 STD 295/80R-22.5 STD 305/70R-22.5 STD 315/80R-22.5 STD 10.00 x 20 11-22.5 HT 10.00 x 20 11-22.5 STD 10.00 x 22 11-24.5 HT 10.00 x 22 11-24.5 STD 11.00 x 20 12-22.5 11.00 x 22 12-24.5 12.00 x 20 12.00 x 24 12.50 x 22.5 12.75 x 22.5 22.5 LOW PROFILE 24.5 LOW PROFILE 24.5 LOW PROFILE HT 275/80R-22.5 HT 275/80R22.5 STD 275/80R-24.5 HT 275/80R-24.5 STD 285/75R-22.5 285/75R-24.5 STD 295/75R-22.5 STD 295/75R-24.5 STD 295/80R-22.5 STD 305/70R-22.5 STD 315/80R-22.5 STD
KM KM KM KM KM KM KM KM KM KM KM KM KM KM KM KM KM KM KM KM KM MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES MILES
66325K 66312K 66300K 66300K 66300K 66300K 66325K 66312K 66312K 66312K 66325K 66312K 66325K 66312K 66312K 66325K 66325K 66312K 66312K 66325K 66300K 66480M 66500M 66480M 66480M 66480M 66460M 66460M 66460M 66480M 66486M 66520M 66500M 66500M 66504M 66520M 66500M 66500M 66520M 66504M 66520M 66500M 66504M 661205M 66480M
325 312 300 300 300 300 325 312 312 312 325 312 325 312 312 325 325 312 312 325 300 480 500 480 480 480 460 460 460 480 486 520 500 500 504 520 500 500 520 504 520 500 504 520 480
6.5" BOLT CIRCLE 5.5" BOLT CIRCLE 5.5" BOLT CIRCLE UNIVERSAL DRIVE AXLE
Models available for other tire size. Contact factory for additional model numbers.
Check the tire size against the chart for the recommended model. Verify the application by determining the distance a fully-inflated tire travels to make one complete rotation. Do this by placing a chalk mark on the tire. Then make another chalk mark on the driving surface next to your tire mark. Roll the vehicle forward until the chalk mark on the tire has made one full revolution. Mark the driving surface at this point. Measure the distance between chalk marks on the driving surface. Calculate the number of revolutions per mile/kilometer. First convert the measured distance into feetround up or down to the nearest tenth. Example: 12 feet 6 inches equals 12.5 feet. Then divide 5,280 by your measurement to get revolutions per mile. Or for metric, convert the distance into meters, then divide 1,000 by the number of meters to get revolutions per kilometer. Refer to the chart at left. Find the closest REVS per MILE to your calculated number to select the appropriate Triseal part. Tires tend to vary in circumference with each tire manufacturer. In most cases, you can rely on the tire size chart to find the correct Triseal part number.
toll free 800.910.SEAL (7325) toll free fax 800.648.2528 www.triseal.com trisealcorp@msn.com
Z16
2003 Triseal Corporation. All rights reserved. Triseal Corporation and MVP logos are registered trademarks of Triseal Corporation. Other brands and product names are trademarks of their respective owners.