Beruflich Dokumente
Kultur Dokumente
Step by step to Draw a Worm Wheel: 1. Click Extruded Boss/Base Radius , on the Front Plane create Circle and set the
of wheel to 53 (or enter by click Smart Dimension and set the diameter to , select Mid Plane in End Condition and set Depth to 18.
2.
and
of hub to 25 (or enter by click Smart Dimension and set the and set Depth to 15.
3.
of bore to 7.5 (or enter by click Smart Dimension and set the diameter to 25). and select Through All in End Condition, then click .
4.
, set Distance
5.
Click Chamfer
, set Distance .
6.
Click Fillet
, set Radius
7.
Click Axis
8.
On Right Plane create Circle that symmetrically on wheel, and set the Radius to 13.5 (or enter by click Smart Dimension and set the diameter to 27). Set the distance between Circle and Origin to 65.5.
9.
Exit Sketch
, create Circle
and set the Radius to 15.5 (or enter by click Smart Dimension and set the diameter to 31). Set the distance between Circle and Origin to 65.5. Exit Sketch , set Pitch to 6.28, click Reverse direction, Revolutions to 0.25, Start .
, create Circle
and set the Radius to 15.5 (or enter by click Smart Dimension and set the diameter to 31). Set the distance between Circle and Origin to 65.5. Exit Sketch , set Pitch to 6.28, Revolutions to 0.25, Start angle to 270, and select .
12. On Front Plane, create sketch the profile of cut teeth. Click Exit Sketch
13. In Toolbar Menu, select Insert, Cut, Sweep Helix/Spiral1 or Helix/Spiral2 in Path
and
, then click