Beruflich Dokumente
Kultur Dokumente
STANDARDS ACTIONS
Constructive comments are invited for the following Public Review Drafts. Public Review Drafts can be accessed by 45-Day Public Review from going to ASHRAEs Standards, Research & TechnolFebruary 15, 2013 to April 1, 2013 ogy/Public Review Drafts web page at: http://www.ashrae.org/public-review-drafts and following the instructions to access the online comment database. All 1st Public Review of BSR/ASHRAE/IES Addendum activity for reviewing and commenting on public review by to ANSI/ASHRAE/IES Standard 90.1-2010, Endrafts can be accomplished completely online. To obtain a ergy Standard for Buildings Except Low-Rise Resipaper copy of any Public Review Draft ($35.00/copy if 100 dential Buildings pages or less and $45.00 if over 100 pages) contact ASHRAE, Inc. Attn: Standards Public Review, 1791 Tullie CirThis proposal increases the stringency of the standard by cle, NE, Atlanta, GA 30329-2305 or email at: (a) requiring the use of certain lighting controls in more standards.section@ashrae.org. spaces types and (b) shortening times until the lights being automatically reduced or shut off and (2) The design community has asked for a tabular structure for specifying the 30-Day Public Review from controls requirements. It is felt that by putting these reFebruary 15, 2013 to March 17, 2013 quirements into a tabular format the provisions will be clearer and thereby more likely to be complied with and 2nd Public Review (ISC) of BSR/ASHRAE/IES Ad- easier to enforce. (3) Modifications have also been made to correct the errors for the wattage threshold for sidelighting dendum ay to ANSI/ASHRAE/IES Standard 90.1and toplighting for daylight responsive controls. 2010, Energy Standard for Buildings Except LowRise Residential Buildings 1st Public Review of ANSI/ASHRAE Standard 1822008 (RA 201X), Method of Testing Absorption WaThe modification corrects a couple of small editorial issues ter-Chilling and Water-Heating Packages and raises the threshold for when daylight responsive controls are required so that they are cost effective in all cliThe purpose of this standard is to prescribe a method of mate zones. These changes are in response to comments testing absorption water-chilling and water-heating packreceived on the first public review.. ages to verify capacity and thermal energy input requirest 1 Public Review of BSR/ASHRAE/ASHE Adden- ments at a specific set of operating conditions. dum x to ANSI/ASHRAE/ASHE Standard 1702008, Ventilation of Health Care Facilities This proposed addendum adds filtration requirements, in Table 6-1, for inpatient hospice and assisted living facilities. This addendum also adds design parameters, in Table 7-1, for resident unit corridors.
Volume V, Issue 6
STANDARDS ACTIONS
2. SCOPE 2.1 This standard applies to heat-operated unitary air conditioners and heat pumps consisting of one or more assemblies, including engine-driven systems. Where such 30-Day Public Review from equipment is provided in more than one assembly, the February 15, 2013 to March 17, 2013 separate assemblies are designed to be used together. 2.2 Equipment within the scope of this standard may be classified as follows: ANSI/ASHRAE Standard 171-2008R, Method of a. Component arrangements: Testing & Rating Seismic Restraint Devices for 1. factory-assembled equipment employing heatHVAC & R Equipment operated or mechanical refrigeration cycle or cycles (e.g., a packaged unit) SPC 171 is proposing to change Standard 171-2008R from 2. equipment employing a heat-operated or mea Method of Test to a Method of Test and Rating System chanical refrigeration cycle with indoor and outstandard. With the proposed TPS change, revised Standoor sections in separate assemblies (e.g., a split dard 171 will be able to both test and rate seismic resystem) straint devices. 3. equipment employing a heat-operated or mechanical refrigeration cycle as a liquid chiller with cooling coil in separate assembly (e.g., TPS CHANGES APPROVED chiller) 4. equipment employing refrigeration cycles and Standards Committee approved the TPS changes for the heating functions (e.g., chiller/heater) following project (see changes below). This TPS is not available for public review comment at this time. If you b. Method of providing air circulation through indoor would like to submit a comment, please email Stephanie section: Reiniche at Standards.Section@ashrae.org. 1. with circulating fan incorporated with indoor assembly ANSI/ASHRAE Standard 40-2002R, Methods of 2. without circulating fan, for use with separate fan Testing for Rating Heat Operated Unitary Airor air handler, or with heating equipment incorConditioning and Heat-Pump Equipment porating a fan continued
2
Volume V, Issue 6
STANDARDS ACTIONS
PUBLICATION NOTICE
The standards documents listed below are now available for purchase on our website by clicking on the following link: http://www.ashrae.org/published-standards, or by contacting the Sales Department at: ASHRAE, 1791 Tullie Circle, NE, Atlanta, GA 30329-2305. Email: orders@ashrae.org. Fax: 404-321-5479. Telephone: 404.636.8400 (worldwide) or toll free at 1.800.527.4723 for orders in the U.S. and Canada. Addenda may be downloaded for free at: ASHRAE Standards Addenda.
2.3 This standard does not include methods of testing the following types of equipment: a. heat-operated absorption and engine-driven liquid chillers not part of a unitary air conditioner (Reference 1, ARI Standard 560-82 covers indirectfired absorption chillers) ANSI/ASHRAE Addenda ac, ad, ae, and af to ANSI/ b. electrically driven unitary air conditioners or heat ASHRAE Standard 34-2010, Designation and Safety pumps covered in Reference 2 (ASHRAE Standard Classification of Refrigerants 37, Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment) ANSI/ASHRAE Addendum h to Std. 55-2010, Therc. refrigerating systems employing the Peltier effect mal Environmental Conditions for Human Occud. desiccant-based cooling systems pancy
A Call for Members is announced for the committee indicated below. Persons who are interested in serving on this ANSI/ASHRAE Addenda c, d and f to ASHRAE committee are asked to indicate their interest and ANSI/ASHRAE Standard 161-2007, Air Quality obtain the necessary membership forms by clicking on the Within Commercial Aircraft following link: ASHRAE Forms and Procedures or by contacting Stephanie Reiniche at: ASHRAE, 1791 Tullie CirWITHDRAWAL NOTICE cle, N.E., Atlanta, GA 30329-2305; phone: 678-539-1143; fax: 678-539-2143; email: Standards.Section@ashrae.org. The following standards have been withdrawn from publication: SPC 174-2009R, Method of Test for Rating Desic ANSI/ASHRAE Standard 87.2-2009, In-Situ Method cant-Based Dehumidification Equipment of Testing Propeller Fans for Reliability PURPOSE: This standard provides test methods for rating This standard is no longer needed. the performance of desiccant based dehumidification ANSI/ASHRAE Standard 136-1993 RA 2006, A equipment. Method of Determining Air Change Rates in Detached Dwellings SCOPE: This method of test applies to dehumidification equipment operating at atmospheric pressure and using des- The contents of Standard 136 have been updated and iccants combined with other components to dehumidify air. brought into Standard 62.2 through Addendum n to ANSI/ASHRAE Standard 62.2-2010, Ventilation and AcNote: this committee is especially interesting in obtaining ceptable Indoor Air Quality in Low-Rise Residential Buildnew members representing the User interest category. ings.
3
Volume V, Issue 6
STANDARDS ACTIONS
INTERIM MEETINGS
A complete listing of project committee interim meetings is provided on ASHRAEs website at: http://www.ashrae.org/pc-interim-meetings.
conference call on February 20, 2013 from 4:00 to 5:00 pm (Eastern). For additional information contact Chip Barnaby, Chair of SPC 205 (cbarnaby@wrightsoft.com). For additional information contact Timothy Corbett, Chair of SGPC 0 (tim.corbett@ssa.gov).
INTERPRETATIONS
New Official Interpretations to the following Standards are now available and can be found on the ASHRAE website at: http://www.ashrae.org/standards-interpretations.
Interpretation 62.1-2007-25 January 25, 2013: Refers to the requirements presented in ANSI/ASHRAE Standard 62.1-2007, Section 6.4 and Table 6-4, regarding design SPC 118.2-2006R, Method of Testing for Rating Residential Water Heaters, will hold a conference call documentation and exhaust rates for copy/printing rooms. on Tuesday, February 26, 2013 from 1:00 pm to 3:00 ANSI/ASHRAE Standard 62.1-2010, Ventilation For pm (Eastern). Acceptable Indoor Air Quality For additional information contact Jim Lutz, Chair of SPC Interpretation 62.1-2010-5 January 26, 2013: Refers to 118.2 (jdlutz@lbl.gov). the requirements presented in ANSI/ASHRAE Standard 62.1-2010, Section 6 and Table 6-4, regarding Minimum SPC 201P, Facility Smart Grid Information Model, Exhaust Rates for Locker/Dressing Rooms. will hold a Webmeeting on Friday, March 1, 2013 from 2:30 pm to 4:30 pm (Eastern). For more information contact Susan LeBlanc, ASHRAE staff liaison to SPC 201 at sleblanc@ashrae.org.
Volume V, Issue 6
STANDARDS ACTIONS
JOIN A LISTSERVE
Click on the list below to learn more about ASHRAE Standards Activities!
ASHRAE Standards Actions SSPC 41 Standard Methods for Measurement SSPC 62.1 Ventilation for Acceptable Indoor Air Quality SSPC 62.2 Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings SSPC 90.1 Energy Standard for Buildings Except Low-Rise Residential Buildings SSPC 90.2 Energy Efficient Design of Low-Rise Residential Buildings SPC 90.4 Energy Standard for Data Centers and Telecommunications Buildings New! SSPC 161 Air Quality within Commercial AirCraft SSPC 189.1 Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings SPC 201 Facility Smart Grid Information Model Code Intended Standards, CIS Listserve