Beruflich Dokumente
Kultur Dokumente
SM1AMA 10553816 9,52(") 1) 31,75 hub mount 0,25 (0,33) 7600 (15200) 0,4 (0,52) 8,3 SM1UPC 10554095 9,52(") 2) 31,75 hub mount 0,37 (0,5) 6000 (10000) 0,6 (0,81) 20 MRV009A 56752538 15,88(") 57,15 3x M6 @ 76,2 SM2AMAN 10553873 15,88(") 114,3 4x "UNC @ 149,4 0,67 3000 2,3 23,3 MRV009C 21868419 12,7(") 2) 44,45 3x M6 @ 63,6 (0,9) (8000) (3,1) SM2AMC 10553881 12,7(") 2) 44,45 3x "UNC @ 63,6 MRV009B5D71 21868435 14 + M5 110 4x 10 @ 130 MRV015A 04614053 15,88(") 57,15 3x M6 @ 76,2 SM4AMAN 10553840 15,88(") 114,3 4x "UNC @ 149,4 1,1 3000 3,5 MRV015B 01349307 12,7(") 3) 44,45 3x M6 @ 63,6 31,6 (1,47) (7900) (5,6) 3) SM4AMB 10553857 12,7(") 44,45 3x "UNC @ 63,6 MRV015B5D71 56750771 14 + M5 110 4x 10 @ 130 MRV040A 04686671 15,88(") 57,15 3x M6 @ 76,2 SM6AMA 10553725 15,88(") 63,5 3x 5/16" @ 101,6 2,7 3000 7,2 SM6AMAN 10553782 15,88(") 114,3 4x "UNC @ 149,4 56,6 (3,6) (7900) (11,8) MRV040B5D71 21869979 14 + M5 110 4x 10 @ 130 MRV040B5D80 56752520 19 + M6 130 4x 11,5 @ 165 MRV050A 04686689 22,23(") 81 3x M6 @ 108 SM8AMAN 10553998 22,23(") 114,3 4x "UNC @ 149,4 3,6 2500 13,6 71,6 (48) (7000) (19) SM8AMA 10553766 19(") 76 4x "UNC @ 98,6 MRV050B5D90 21868492 24 + M8 130 4x 12,4 @ 165 Round shaft with long key as standard. Alternatively: 1) without key 2) with flat 3) with Woodruff key Most popular models have been marked in red. More options might be offered for special applications. Performance at 620 kPa air pressure. ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve.
0,7 0,8 3,4 4 3,4 4 3,4 3,7 6 3,7 3,7 6 7,4 7,4 8,4 10 10 10,2 13 10,2 13
SM1AMA SM1AMA-TK1 (10555209) SM1AMA-005 (10555274) SM1AM-AG587 (10553832) SM1UPC SM1UPC-TK1 (10555365) SM1UPC-005 (10555282) MRV009A MRV015A-AH634 (49827892) 4) SM2AMAN-TK1 (10555381) SM2AMAN N/A (comes with Nema 56C flange) SM2AMC-005 5) MRV009C SM2AM-AH636 (10553691) (10555290) SM2AMC-TK1 (10555217) SM2AMC SM2AM-AH636 (10553691) MRV009B5D71 N/A (comes with IEC flange) MRV015A MRV015A-AH634 (49827892) 4) SM4AMAN-TK1 (10555225) SM4AMAN N/A (comes with Nema 56C flange) SM4AMB-005 MRV015B SM4AM-AH634 (10553865) 5) (10555308) SM4AMB-TK1 (10555233) SM4AMB SM4AM-AH634 (10553865) MRV015B5D71 N/A (comes with IEC flange) MRV040A MRV015A-AH634 (49827892) 4) SM6AMA SM6AM-AH634 (10553709) 5) SM6AMA-TK1 (10555241) SM6AMA-005 SM6AMAN N/A (comes with Nema 56C flange) (10555316) MRV040B5D71 N/A (comes with IEC flange) MRV040B5D80 N/A (comes with IEC flange) MRV040B5D80-TK1 (25012923) MRV050A MRV050A-AH640 (04686929) 4) SM8AMAN N/A (comes with Nema 145C flange) SM8AMA-TK1 (10555258) SM8AMA-005 (10555258) SM8AMA SM8AM-AH640 (10553758) 5) MRV050B5D90 N/A (comes with IEC flange) MRV050B5D90-TK1 (25012931) 4) MRV brackets require 2x M6 screws to be fitted. 5) SM brackets require 3x M6 screws to be fitted to MRV motors.
www.ingersollrandproducts.com
Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of product shall be in accordance with Ingersoll Rand's standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Design and specification are subject to change without notice or obligation.
MRV003A010-RP (16619520)
MRV015A010-RP (16619546)
MRV040A010-RP (16619561)
15
180
10
90
15600 W
Power 2 Holes
Nm
225
180
135
0,38
Tor que
@6
0,19
@4
,2 b ar
90
,8 b a
45
0 0 Model: SM1AMA
5200
15600
180
20
90
10
8600
12900 W
TORQUE
0,9
Nm
272
0,6
Tor que
@6
0,3
@4 ,8 b
,2 b ar ar
136
63
12900
www.ingersollrandproducts.com
Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of product shall be in accordance with Ingersoll Rand's standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Design and specification are subject to change without notice or obligation.
540
Air c
ar 6,2 b
20
360
180
10
0
3x M6-6H (MRV009C) -20UNC-2B (SM2AMC)
2750
5500
8250
W 600
Power
Nm
@ 4,8 bar
480
TORQUE
3,3
360
Tor que
2,2
@6
@4 ,8 b
,2 b ar
240
ar
1,1
120
5500
8250
MRV009A
www.ingersollrandproducts.com
Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of product shall be in accordance with Ingersoll Rand's standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Design and specification are subject to change without notice or obligation.
540
360
ons Air c
ar 6,2 b
40
180
20
2700
5400
8100
W 1000
800
600
Tor que @4 ,8 b
@6
,2 b ar
400
ar
200
5400
8100
MRV015A
www.ingersollrandproducts.com
Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of product shall be in accordance with Ingersoll Rand's standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Design and specification are subject to change without notice or obligation.
Reverse Inlet
2000 N
3x M6-6H (MRV040A) /16"-18UNC-2B (SM6AMA) min. 11.11 [0.44] deep Forward Inlet
ons Air c
1334
ar 6,2 b
70
667
35
2700
5400
8100
kW
2,5
@ 4,8 bar
2,0
TORQUE
1,5
12
Tor que
8
@6
@4 ,8 b
4
,2 b ar
1,0
ar
0,5
0 0
5400
8100
www.ingersollrandproducts.com
Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of product shall be in accordance with Ingersoll Rand's standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Design and specification are subject to change without notice or obligation.
2700
141
Air c
1800
ar 6,2 b
94
900
47
0
4x M6-6H (MRV050A) 3 /8"-16UNC-2B (SM8AMA) min. 12 [0.47] deep
2700
5400
8100 kW 4,00
3,34
@ 4,8 bar
2,67
TORQUE
20
2,00
13,4
Tor que @4 ,8 b ar
@6
,2 b ar
1,34
6,7
0,67
0 0
2400
7200
www.ingersollrandproducts.com
Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of product shall be in accordance with Ingersoll Rand's standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Design and specification are subject to change without notice or obligation.
Rotation Bias
Non reversible Non reversible
Mounting style
Hub Mount Hub Mount Hub Mount Hub Mount Foot mount bracket Hub or Face Mount Hub or Face Mount Hub or Face Mount Foot Mount Foot Mount NEMA 56C Flange NEMA 56C Flange IEC B5 D71 Flange Hub or Face Mount Hub or Face Mount Hub or Face Mount Foot Mount Foot Mount Foot Mount Foot Mount NEMA 56C Flange NEMA 56C Flange IEC B5 D71 Flange Hub or Face Mount Foot Mount NEMA 56C Flange IEC B5 D80 Flange Hub or Face Mount Foot Mount NEMA 56C Flange IEC B5 D90 Flange Hub or Face Mount Hub or Face Mount
0,60 0,33 HP HP
V1X 2VMX/CCW 2VMX/CW VA2X 2VMJ/CCW-CW VA2J 2VMC/CCW-CW VA2C VS2C D71 4VM\X/CCW-CW VA4X Non reversible Non reversible Non reversible Non reversible
0,88 HP
2AM-ARV-93
Non reversible
4AM-NRV-54A 4VMJ/CCW-CW VA4J 4AM-FRV-63A 4AM-NRV-70C 4AM-ARV-120 6AM-FRV-23A 6AM-NRV-22A 6AM-ARV-55 8AM-NRV-42A 8AM-FRV-30A 8AM-ARV-71 8AM-NRV-32 16AM-FCW-2 4VMC/CCW-CW V3AC VS4C D71 VA6X VA6J VA6C VS6C D80 VA8X VA8J VS8C D90 VA8C Non reversible Non reversible
4,8 HP
3,6 HP
1,5 HP
www.ingersollrandproducts.com
Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of product shall be in accordance with Ingersoll Rand's standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Design and specification are subject to change without notice or obligation.
10 HP
Non reversible