Beruflich Dokumente
Kultur Dokumente
WS10-1
WS10-2
Workshop Objectives
Create a tet mesh using the auto tet mesher, TetMesh. See the effect of two TetMesh parameters on the mesher by re-meshing and changing the value of the parameters. For both meshes determine the quality of the tet elements.
Problem Description
Tet mesh using TetMesh with the approximate element size of 20.0 or 0.5 Determine the quality of the tet elements
Software Version
MSC.Patran 2005r2
WS10-3
WS10-4
WS10-5
i
Mesh the solid. a. Elements: Create / Mesh/ Solid. b. Select Tet for Elem Shape. c. Select TetMesh for Mesher. d. Select Tet10 for Topology. e. Use default values for TetMesh Parameters f. Select Solid 1 for Input List. g. Enter 20.0 for Value of the Global Edge Length. h. Click Apply. i. Click Smooth Shaded icon.
b d f g
c e
h
PAT301, Workshop 10, December 2005 Copyright 2005 MSC.Software Corporation WS10-6
Look at the free faces of the tet elements. a. Elements: Verify / Element / Boundaries. b. Select Free Faces for Display Type. c. Click Apply.
WS10-7
a
Determine the quality of each tet element. a. Element: Verify / Tet / All. b. Click Apply. c. See spread sheet on next page, Continued
b
PAT301, Workshop 10, December 2005 Copyright 2005 MSC.Software Corporation WS10-8
WS10-9
Create a color fringe plot for the tet element aspect ratio.. a. Element: Verify / Tet / Aspect. b. Adjust Aspect Ratio to a value near 5. c. Click Apply to obtain the fringe plot of aspect ratio. d. Click View Corner icon and drag to show close-up view.
d c
PAT301, Workshop 10, December 2005 Copyright 2005 MSC.Software Corporation WS10-10
Re-mesh the solid to try to create an improved mesh. a. Elements: Create / Mesh / Solid. b. Select Tet for Elem Shape. c. Select TetMesh for Mesher. d. Select Tet10 for Topology. e. Click TetMesh Parameters f. Enter 0.05 for Maximum h/L. g. Enter 0.1 for Global Edge Length multiplier. h. Click OK. i. Select Solid 1 for Input List. j. Enter 20.0 for Value. k. Click Apply. l. Click Yes for delete the existing mesh on Solid 1.
b e i j
c d f g
k
PAT301, Workshop 10, December 2005 Copyright 2005 MSC.Software Corporation WS10-11
Original Mesh
Re-Mesh
The tables above illustrate the differences between the first mesh and the re-mesh. Observe the large improvements made in each of the characteristics of the model after the remesh.
WS10-12
a
Quit MSC.Patran a. Select File on the Menu Bar and select Quit from the drop down menu
WS10-13
WS10-14