Beruflich Dokumente
Kultur Dokumente
Determination of Fortification category 3. 1. 3 Determination of design basic acceleration of ground motion 3. 2. 2 Appendix A Adjustment of fortification intensity regarding site 3. 3. 3 Identification of plat 4. 1. 1 Determination of site class 4.1.6 Determination of seismic influence coefficient and characteristic period value 5.1.4 drawing seismic influence coefficient curve 5.1.5 a simplified method such as the base shear method not higher than 40m with deformation predominantly due to shear and a rather uniform distribution of mass and stiffness in elevation, or for structures modeled as a single-mass system
Methods shall be taken for seismic computation 5.1.2 extremely irregular configuration, building assigned Fortification category A, tall buildings (Table 5.1.2-1) the response spectrum method for modal analysis
a time-history analysis
Note: the values in the brackets are separately used for where the design basic seismic acceleration is 1.5g and 0.30g
3rd group
0.35
0.45
0.65
0.90
Where, 1,2,:coefficientsdeterminedfromdampingratio,,
The characteristic value of horizontal seismic action of the structure shall be determined by the following equation: