Beruflich Dokumente
Kultur Dokumente
Features
Direct Mount RedHat II Spool Valves 8551, 8553 Anodized Aluminum, Brass and Stainless Steel Bodies
1/4" and 1/2" NPT
SERIES
Direct Mount
Compact Spool Valve convertible from 3/2 to 5/2 with flow plates Mount directly to actuators with NAMUR interface per VDI/VDE 3845 Single and dual solenoid constructions available Integral Breather Block vents to spring side of actuator to exhaust, preventing corrosion of the actuator Unique design combines hard T-seals and flexible o-rings, provides bubble-tight shutoff, resistance to dirt and multimillion cycle life controlling air or inert gas Low Power and Intrinsically Safe construction available See Special Service Pilot Valve Section for details
% ^ )
Construction
Valve Parts in Contact with Fluids Body End Cover (Spring end) Spool Valve Internals Pilot End Covers Core Tube Core and Plugnut Springs Seals and Discs Top Disc Core Guide Seat and Seat Insert Shading Coil Rider Ring (low power) Aluminum, Black Anodized Brass Glass-filled Polyamide Zamak, Stainless Steel, Acetal (POM), Aluminum Brass 316L Stainless Steel 316L Stainless Steel
12 12
3/2
2 4 12
5/2
2 4 14 12
5/3
2 4 14 5
3 2
5 1 4
3 1 10 12 4
5 2 12
3 2 4
14
14
5 1
5 1
Aluminum, Black Anodized Brass Stainless Steel Stainless Steel Stainless Steel NBR Nylon (PA) Acetal Brass, Acetal Copper PTFE
Electrical
Standard Coil and Class of DC Insulation Watts F 11.6 Watt Rating and Power Consumption AC Spare Coil Part Number General Purpose Explosionproof
Standard Voltages: 24, 120, 240, 480 volts AC, 60 Hz (110, 220 volts AC, 50 Hz). 6, 12, 24, 120, 240 volts DC. Must be specified when ordering. Other voltages are available when required.
Approvals
UL/CSA approvals for aluminum constructions pending. EF and EV are UL listed solenoids. CSA certified. Meet applicable CE directives. SIL 3 capable per IEC 61508 on normally closed single solenoid. Third party certification provided by EXIDA.
Solenoid Enclosures
Standard: Watertight, Types 1, 2, 3, 3S, 4, and 4X. Optional: Explosionproof and Watertight, Types 3, 3S, 4, 4X, 6, 6P, 7, and 9. (To order, add prefix EF or (EV for stainless steel) to catalog number.) See Optional Features Section for other available options.
8551_RHII_DMoR2
201
VALVE AUTOMATION
3/25/25/3
SERIES
8551, 8553
Direct Mount
4
Single Solenoid PFDAVG = 3.3 x 10-3 Operating Pressure Differential (psi) Max. Fluid Temp.F Catalog Number 8551G401 1/4 1/4 .86 30 150 120 140 120 EF8551G403 EV8551G409 1/2 1/2 3.7 8553G401 Operating Pressure Differential (psi) Dual Solenoid Max. Fluid Temp.F Catalog Number 8551G402 8551G465 30 150 120 140 120 8551G466 EF8551G404 EV8551G410 8553G402 Const. Ref. 1 2 2 1 2 2 10.1/F 11.6/F Watt Rating/ Class of Coil Insulation AC DC
Body Material Aluminum 3/2, 5/2 Aluminum 5/3 Center Closed Aluminum 5/3 Center Open Brass 3/2, 5/2 316L Stainless Steel 3/2, 5/2 Aluminum 3/2, 5/2
Air-Inert Gas Pipe Orifice Cv Size Size Flow Max. Max. (ins.) (ins.) Factor Min. AC DC AC DC
x 1/8 inch NPT exhaust for aluminum and brass. Brass construction supplied standard with EF solenoid. Stainless steel construction supplied standard with EV solenoid.
VALVE AUTOMATION
Aluminum 5/3 Center Open Brass 3/2, 5/2 316L Stainless Steel 3/2, 5/2 Aluminum 3/2, 5/2
x 1/8 inch NPT exhaust for aluminum and brass. Brass construction supplied standard with EF solenoid. Stainless steel construction supplied standard with EV solenoid.
202
8551_RHII_DMoR2
3/25/25/3
4
Dimensions inches (mm)
Series NPT L1 x L2 x H2 H1 W 8551 1/4 4.96 (126) 6.50 (165) 4.38 (111) 1.57 (40) 1.77 (45)
H2
1/8 NPT
3
SERIES
8551, 8553
Direct Mount
Const. Ref. 1
3.02 (76.7) 2.03 (51.6)
1/4 NPT
x Manual override option MH adds .250" (6.4), MS option adds .468" (11.9) to each solenoid endcap. Optional Manual Operators Description
1 0 1
1/4 NPT
H1
Add Suffix MO
W
1/8 NPT AUX. PRESSURE PORT
Push and turn to lock with flat head screwdriver slot Momentary push in with flat head screwdriver slot Momentary push in by hand
L1 L2
MI
0 2
MH
0
1
MS
.95 (24)
1.26 (32)
Const. Ref. 2
Series NPT L1 x L2 x H2 H1 W 8551 (5/3) 1/4 7.44 (189) 4.38 (111) 1.57 (40) 1.77 (45) 8553 1/2 7.09 (180) 8.85 (225) 4.77 (121) 2.08 (53) 2.87 (73)
3.02 (76.7) 2.03 (51.6)
1/4 NPT
H2
5 1
3
x Manual override option MH adds .250" (6.4), MS option adds .468" (11.9) to each solenoid endcap. Optional Manual Operators Description
1 0 1
W
H1
Add Suffix MO
L1 L2
Push and turn to lock with flat head screwdriver slot Momentary push in with flat head screwdriver slot
MI
0 2
MH
0
1
1.77 (45)
.95 (24)
MS
1.26 (32)
8551_RHII_DMoR2
203
VALVE AUTOMATION
VALVE AUTOMATION
204
8551_RHII_DMoR2