Beruflich Dokumente
Kultur Dokumente
MICRO-STAR
INTERNATIONAL
COMPANY LTD.
Specification & User’s Guide
2. Mainboard Specification
CPU
® ® TM
l Slot 1 for Intel Pentium II/Celeron processor.
l Supports 233MHz, 266MHz, 300MHz, 333MHz, 350MHz, 400MHz, 450MHz, and
faster.
Chipset
®
l Intel 82443BX/PIIX4E chipset.
Clock Generator
l 68/75/83/100/103/112/113MHz clocks are supported.
Main Memory
l Supports four memory banks using two 168-pin unbuffered DIMM.
l Supports a maximum memory size of 256MB (8M x 8) or 512MB (16M x 4) registered
DIMM only.
l Supports ECC(1-bit Error Code Correct) function.
l Supports 3.3v SDRAM DIMM.
Slots
l One AGP (Accelerated Graphics Port) slot.
- AGP specification compliant
- AGP 66/133MHz 3.3v device support
l Three 32-bit Master PCI Bus slots and one 16-bit ISA bus slots.
l Supports 3.3v/5v PCI bus Interface.
On-Board IDE
®
l An IDE controller on the Intel PIIX4E PCI Chipset provides IDE HDD/CD-ROM with
PIO, Bus Master and Ultra DMA/33 operation modes.
l Can connect up to four IDE devices.
On-Board Peripherals
l On-Board Peripherals include:
- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes.
- 2 serial ports (COM A + COM B)
- 1 parallel port supports SPP/EPP/ECP mode
- 2 USB ports
- 1 IrDA connector for SIR/FIR..
Sound
l Creative® ES1371/ES1373(reserved)
- Running on PCI BUS.
- 64 Voice and AC3 Capable (ES1373 only)
- Support Direct Sound and Direct Sound 3D
- AC97’ Compliant
BIOS
l The mainboard BIOS provides “Plug & Play” BIOS which detects the peripheral devices
and expansion cards of the board automatically.
l The mainboard provides a Desktop Management Interface(DMI) function which records
your mainboard specifications.
l ACPI(Advanced Configuration and Power Interface) feature.
Dimension
l MICRO-ATX Form Factor : 24.4cm(L) x 19.2cm(W) x 4 layers PCB
Mounting
l 6 mounting holes.
Other Features
l Keyboard Password Wake-Up (reserved)
l LAN Wake-Up
l Internal/External Modem Wake-Up
3. Mainboard Layout
PSFAN
USB
Power Supply
Top: Port 1
BIOS
Bottom:
ATX
Port 2
System
Hardware
Monitor
(optional)
JSOR1
Top: IR
LPT
DIMM 1
DIMM 2
Bottom:
COM A
VGA Port SLOT 1
FDD
FW82443BX
JRMS1
J3
IDE1
IDE2
Top: Midi/
Game Port
Bottom:
J6: MDM_IN
Line-Out
Line-In
Mic
J5: AUX_IN
4
J8: CD_IN
SW1
1
BATT
AGP SLOT +
PCI SLOT 1
Creative
ES1371
JWOL1 SYSFAN
PCI SLOT 2
JP1
JMDM1
FW82371EB JBAT1
JGL1
JFP1
ISA SLOT 1
4. Backpanel Layout
4.1 Connectors
6 5
4 3
2 1
6 5
4 3
2 1
1 2 3 4
5 6 7 8
USB Ports
13 1
25 14
1 2 3 4 5
6 7 8 9
4.1-6 Speaker
31 30 33 32 29 28
Speaker Jack
4.1-7 Line-In
25 24 27 26 23 22
Line In Jack
4.1-8 Microphone
19 18 21 20 17 16
Microphone Jack
5. Slot 1
B1 A1
B2 A2
B3 A3
B4 A4
B5 A5
B6 A6
B7 A7
B8 A8
B9 A9
B10 A10
B11 A11
B12 A12
B13 A13
B14 A14
B15 A15
B16 A16
B17 A17
B18 A18
B19 A19
B20 A20
B21 A21
B22 A22
B23 A23
B24 A24
B25 A25
B26 A26
B27 A27
B28 A28
B29 A29
B30 A30
B31 A31
B32 A32
B33 A33
B34 A34
B35 A35
B36 A36
B37 A37
B38 A38
B39 A39
B40 A40
B41 A41
B42 A42
B43 A43
B44 A44
B45 A45
B46 A46
B47 A47
B48 A48
B49 A49
B50 A50
B51 A51
B52 A52
B53 A53
B54 A54
B55 A55
B56 A56
B57 A57
B58 A58
B59 A59
B60 A60
B61 A61
B62 A62
B63 A63
B64 A64
B65 A65
B66 A66
B67 A67
B68 A68
B69 A69
B70 A70
B71 A71
B72 A72
B73 A73
B74 A74
B75 A75
B76 A76
B77 A77
B78 A78
B79 A79
B80 A80
B81 A81
B82 A82
B83 A83
B84 A84
B85 A85
B86 A86
B87 A87
B88 A88
B89 A89
B90 A90
B91 A91
B92 A92
B93 A93
B94 A94
B95 A95
B96 A96
B97 A97
B98 A98
B99 A99
B100 A100
B101 A101
B102 A102
B103 A103
B104 A104
B105 A105
B106 A106
B107 A107
B108 A108
B109 A109
B110 A110
B111 A111
B112 A112
B113 A113
B114 A114
B115 A115
B116 A116
B117 A117
B118 A118
B119 A119
B120 A120
B121 A121
GND
+12V
SENSOR
VCC
FIRRX
IRRX
GND
IRTX
Appendix A
SW1 CPU
1 2 3 4 Core/Bus Ratio
ON OFF ON ON 2.5
ON ON OFF ON 3
ON OFF OFF ON 3.5
ON ON ON OFF 4
ON OFF ON OFF 4.5
ON ON OFF OFF 5
ON OFF OFF OFF 5.5
OFF ON ON ON 6
OFF OFF ON ON 6.5
OFF ON OFF ON 7
OFF OFF OFF ON 7.5
OFF ON ON OFF 8
Note: The CPU Bus Frequency is set at 66MHz or 100MHz by CPU default.
Jumpers
1 1
3 3
Note: You can clear CMOS by shorting 2-3 pin, while the system is off. Then, return to 1-2 pin position.
Avoid clearing the CMOS while the system is on; it will damage the mainboard.
The mainboard supports two kinds of system boot up: the Boot-Up by switch and the Immediate Boot-Up.
With the Boot-Up by Switch, the system will boot up only when the power on switch is pressed. For
Immediate Boot-Up, the system will boot up instantly when the power connector is connected into the system.
JP1 Feature
Note: Short JP1, when using Boot-Up by Switch feature. Open JP1, to enable
Immediate Boot-Up.
Connectors
FDD
1
1 1
Keylock
JFP1
Power Switch
Connect to a 2-pin push button switch. This switch had the same feature with JRMS1.
Reset Switch
Reset switch is used to reboot the system rather than turning the power ON/OFF. Avoid rebooting while the
HDD LED is lit. You can connect the Reset switch from the system case to this pin.
Power LED
The Power LED is lit while the system power is on. You can connect the Power LED from the system case to
this pin. When the system enters suspend mode, the power LED will blink. (see Power Saving LED Connec-
tor: JGL1)
Speaker
Speaker from the system case is connected to this pin.
If on-board Buzzer is available:
Short pin 14-15: On-board Buzzer Enabled.
Open pin 14-15: On-board Buzzer Disabled.
HDD LED
HDD LED shows the activity of a hard disk drive. Avoid turning the power off while the HDD led is lit. You
can connect the HDD LED from the system case to this pin.
Keylock
Keylock allows you to disable the keyboard for security purposes. You can connect the keylock to this pin.
This connector is for used with Modem add-on card that supports the Modem Wake Up function.
NC GND NC 5VSB
MDM_WAKEUP
This connector is for use with LAN add-on cards that supports Wake Up on LAN function.
5VSB
GND
MP_WAKEUP
Appendix B - Schematics
Notes
Notes
Notes
MAIN OFFICE
MICRO-STAR INTERNATIONAL
No. 69, Li-De St., Jung-He City,
Taipei Hsien, Taiwan
Tel: 886-2-3234-5599
Fax: 886-2-3234-5488
http:// www.msi.com.tw
OVERSEAS OFFICE