Beruflich Dokumente
Kultur Dokumente
, 1-1/2" 14" Seals: EPDM, FKM(Optional) Sizes 1 1/2" - 14" PVC/PP/EPDM/FKM Models available with NSF-61 Certification
Gate Valve
Standard Features
Straight-through flow with minimal pressure drop Unique sliding cylindrical plug design provides larger seating area than conventional gate valves Made of durable, corrosion resistant plastic No metal to media contact anywhere in valve Clean-out (drain) plug in bottom area of valve body Rated for full vacuum service Light weight for easier and economical installation Positive bubble-tight shut-off Visual position indicator
DESCRIPTION Body Gate (Plug) Stem Bonnet (A) Bonnet (B)* Thrust Bearing Bolt, Nut, Washer Hand Wheel Indicating Cover Indicating Ring Guide Pin Guide Pin Holder Gasket O-Ring (A) Washer Nut O-Ring (B) O-Ring (C) Sheet Gasket Plug
PCS. 1 1 1 1 1 1 Set 1 1 1 1 1 1 1 1 1 1 2 1 1
MATERIAL PVC PP PVC PVC PVC PP Stainless Steel 304 PP PC PVC Stainless Steel 304 PVC EPDM EPDM PVC Stainless Steel 304 EPDM, Others EPDM, Others EPDM, Others PVC
Options
2 square operating nut Stem extensions Locking handles Electric actuation, up to 3 FKM seals
Caution
Never remove valve from pipeline under pressure. Always wear protective gloves and goggles. 90 ASAHI/AMERICA
Rev. E 09-08
Type P
Sizes 1-1/2" 6"
12 14
H2
Gate Valves
A 16 15 8 9 7 4 18
l (LIFT)
11 10 13 6
5 17
H1
3 D1 1
5", 6"
D C
P.C.D.
n - h
t L
23 24
Troubleshooting
What if fluid still flows when fully closed? 1. Body or plug is worn or damaged. Replace. 2. Seat is worn or damaged. Replace. 3. Foreign material caught at the bottom of body. Needs cleaning. What if handle does not engage with stem? 1. Stem damaged or broken. Change stem. 2. Engaging part of stem and/or plug damaged or broken. Need to replace stem and/or plug. What if there are leaks between bonnet and body? 1. Bolts are not tightened properly. Tighten diagonally and evenly. 2. O-ring between body and bonnet damaged or worn. Change O-ring.
ANSI CLASS 150 d1 D C 5.00 3.88 6.00 4.75 7.00 5.50 7.50 6.00 9.00 7.50 n 4 4 4 4 8 8 8 h A H1 H2 H L t D1 l 0.62 6.50 0.87 4.72 4.72 1.93 4.21 5.20 9.41 0.75 7.01 0.91 5.12 5.12 2.36 5.28 5.35 10.63 0.75 7.48 0.94 6.10 6.10 2.95 5.98 5.91 11.89 0.75 7.99 0.98 6.69 6.69 3.35 6.69 6.10 12.79 0.75 9.02 1.06 7.68 7.68 4.33 8.15 6.42 14.57 0.88 10.24 1.06 9.25 9.25 4.61 8.94 7.09 16.03 0.88 10.51 1.06 10.63 10.63 5.43 10.35 7.17 17.52
d1
d 1 1/2 40 1.57
INCHES
mm
2 3 4 5 6
2 1/2 65 2.56
1 1/2 - 8 10 12-14
125 4.92 4.33 10.00 8.50 150 5.91 5.12 11.00 9.50
35 Green Street, P.O. Box 653, Malden, MA 02148 Tel: 800-343-3618 781-321-5409 Fax: 800-426-7058 E-mail: asahi@asahi-america.com Register at our interactive web site for on line ordering, product availability, order tracking, and many useful features: www.asahi-america.com
2 91
Gate Valves
Type P Parts (Sizes 8" 14" )
NO. 1 2 3 4 4a 4b 5 5a 5b 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1a DESCRIPTION Body Gate (Plug) Stem Bonnet (A) Bush (A) Knock Pin (A) Bonnet (B)* Bush (B) Knock Pin (B) Thrust Bearing Bolt, Nut, Washer Hand Wheel Indicating Cover Indicating Ring Guide Pin Guide Pin Holder Gasket O-Ring (A) Washer Nut Screw O-Ring (B) O-Ring (C) O-Ring (D) O-Ring (E) O-Ring (F) Sheet Gasket Plug Body Metal Inserts** PARTS PCS. 1 1 1 1 1 1 1 1 1 1 Set 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 MATERIAL PVC PP PVC PVC PP PP PVC PP PP High Carbon Chromium Stainless Steel 304 PP PC PVC Stainless Steel 304 PVC EPDM EPDM PVC Stainless Steel 304 Stainless Steel 304 EPDM, Others EPDM, Others EPDM, Others EPDM, Others EPDM, Others EPDM, Others PVC Copper Alloy
Type P
Sizes: 8" 14"
12 14 11 13 21 5b 17 20 4b 19 4a 18 2 A 16 15 8 9 10 5 5a 6 22 4 7 3 1
H2
D1
H1
l (LIFT)
P.C.D. C
d d1
n- h
n- h n1- M 1a
23 24
Cv Values
NOMINAL SIZE
INCHES
Weight (POUNDS)
Cv 130 180 415 470 690 1000 1400 2900 3700 5200 7000
NOMINAL SIZE
INCHES
FLANGED
mm
mm
1 1/2 2 2 1/2 3 4 5 6 8 10 12 14
1 1/2 2 2 1/2 3 4 5 6 8 10 12 14
7.50 10.20 13.00 16.60 22.00 29.00 42.00 68.50 95.00 150.00 188.00
* Stem holder ** 8" and 12" sizes: 4 inserts; 14" size: 8 inserts
Sample Specification
All Gate Valves shall be constructed of High Impact PVC and have no metal-to-media contact. The gate shall be a tapered cylindrical plug design PVC shall conform to ASTM D1784 Cell Classification 12454A, & PP to ASTM D4101 Cell Classification PP0210B67272. Valves shall have a pressure rating of 150 psi at 70 degrees F sizes 1-1/2" through 8", 110 psi at 70 degrees F size 10", and
75 psi at 70 degrees F sizes 12" and 14". The valve shall have a non-rising stem, come standard with sealed position indicator, clean-out plug and EPDM or FKM seals as manu-factured by Asahi/America Inc.
ANSI CLASS 150 d 7.72 9.72 11.73 13.70 d1 6.61 8.27 10.04 11.69 D 13.50 16.00 19.00 21.00 C 11.75 14.25 17.00 18.75 n 6 12 10 8 L h n1 M 0.88 2 3/4 UNC 11.50 0.98 1.14 4 1 UNC 14.96 16.93 0.98 2 7/8 UNC 15.75 t D1 A 1.10 12.20 12.20 1.18 14.17 14.17 l 7.09 8.90 H1 9.45 H2 H 13.27 22.72
mm
8 10 12 14
1.22 16.14 16.14 10.75 12.60 18.90 31.50 1.26 17.32 17.91 12.56 12.20 23.62 35.83
92
ASAHI/AMERICA
Rev. E 09-08