Beruflich Dokumente
Kultur Dokumente
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
Algorithm Notation: -----------------F = turn front side clockwise by 90 degrees F' = turn front side counter-clockwise by 90 degrees U = turn upper side clockwise by 90 degrees U' = turn upper side counter-clockwise by 90 degrees 2U = turn upper side by 180 degrees (clockwise or counter-clockwise...it doesn't matter) R = turn right side clockwise by 90 degrees (clockwise, as if you were facing it) R' = turn right side counter-clockwise by 90 degrees etc...
1 of 12
27-02-2013 20:07
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
1. Solve the green side first > start with green side up > find a green edge piece and move it to the Down side > rotate Down side until other color on the edge piece matches the center piece > now twist side 180 degrees to get green edge on green side > if it's all OK, move on to next edge piece > if edge is in correct spot but flipped, do F' U L' U'
2 of 12
27-02-2013 20:07
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
at this point, after getting all 4 green edge pieces in place, you should have the green cross on top and all edge pieces should be correct
3 of 12
27-02-2013 20:07
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
> fix green side corners: > find a green corner and get it directly under where it should go (match the other two colors on the corner piece to the other two side colors) > with the piece you are working on in the bottom right corner, do R' D' R D from 1-6 times (keeping the same face forward at all times) > once that corner is done, solve the other 3
at this point you should have the green side done and all of the first layer done (and all edge pieces matching their correct sides)
4 of 12
27-02-2013 20:07
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
2. Solve the second layer... > > > > turn green side down, blue side up find an edge piece without blue in it (see ** if can't do this) twist the top blue side so edge piece matches side color with that piece front and center, look for which side (left or right) matches top color and do one of these:
top matches right side: U R U' R' U' F' U F top matches left side: U' L' U L U F U' F'
5 of 12
27-02-2013 20:07
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
> repeat for all edge pieces of second layer.... ** if you can't find a top edge piece without blue in it, find one that is an edge piece in the middle layer and make it the front-right-middle, then do this: U R U' R' U' F' U F at this point you should have two layers done!
3. Solve the BLUE CROSS.... > look at top blue layer for one of these cases: no small L: do F R U R' U' F' to get small L small L: make it top back left, do F R U R' U' F' the "L" you are looking for is made up out of three blue pieces, the center and two edge pieces
6 of 12
27-02-2013 20:07
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
you should now have three in a row. make the 3-in-a-row go left to right across the top
> try twisting top blue side so two edge pieces line up with their correct sides if you can't get two lined up do R U R' U R 2U R' if you get two lined up, and they are across from each other, make the lined-up edges the front and back sides and do R U R' U R 2U R' (this should make the two lined-up sides adjacent) if the two lined up are adjacent, make
7 of 12
27-02-2013 20:07
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
should now have blue cross on top and be able to twist top to get all edge pieces lined up
4. solve the final 4 corners!!! > check the corners to see if they are in their correct locations (even though they may be flipped). You should either have 0, 1, or all 4 in their correct spots.
8 of 12
27-02-2013 20:07
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
if 0: do U R U' L' U R' U' L with blue cross on top this should get 1 or more corners correct if 1: do U R U' L' U R' U' L with blue cross on top and correct corner as upper right of front face this should get 4 corners correct, but you may need to repeat this U R U' L' U R' U' L once if 4: go to next step...
9 of 12
27-02-2013 20:07
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
> with 4 corners correct (but flipped), pick a side and make it the front, with a corner to flip in the top right
NOTE: always keep this front side the same during the next few steps!!!! do R' D' R D twice and see if that corner is flipped correctly
if yes, turn up face 90 degrees and repeat with next corner, always keeping the same front face (even though it looks like you're messing things up!)
10 of 12
27-02-2013 20:07
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
11 of 12
27-02-2013 20:07
http://www.cs.swarthmore.edu/~knerr/helps/rcube.html
www.rubiks.com step-by-step guide www.rubiks.com videos back to helps Last Modified: Mon 10 Jan 2011 12:23:26 PM EST
All original material on this site is licensed under a Creative Commons License : SwatCS
: CSS : HTML :
12 of 12
27-02-2013 20:07