Beruflich Dokumente
Kultur Dokumente
Parameters
Advantages Performance optimised sizes: The solenoid valves CPE, Compact Performance are distinguished by their minimal width and low power consumption at high flow rates. Can be mounted right in the front line: On cylinders On moving system components Flexible installation through individual mounting CPE10, CPE14 and CPE18: Simple manifold structure consisting of fixed-grid manifold blocks made from stable aluminium with 2 to 10 valve positions or modular manifold blocks made from durable plastic. Short tubing lengths requiring minimal air volume: Short switching times Short response times Optimised installations: Shorter machine cycles Larger quantities Lower power consumption Convenient manual override. The sockets KMYZ-9 for sizes CPE10 and CPE14 feature integrated current reduction. All CPE valves therefore have a duty cycle of 100%.
-K-
Width 10 mm 14 mm 18 mm 24 mm
-M-
Internet: www.festo.com/catalogue/...
Internet: www.festo.com/catalogue/...
Blanking plate for vacant positions Vacant position cover for 5/2 or 5/3-way valve
Blanking plate for vacant positions Vacant position cover for 3/2-way valve
Manifold block with air supply 2 valve positions For CPE10, CPE14 or CPE18 For 5/2 and 5/3-way valves Ducts 1, 3 and 5 can have closed or open ends Ducts closed when the manifold is full or when pressure zones are being used Manifold block with air supply 3 valve positions For CPE10, CPE14 or CPE18 For 5/2 and 5/3-way valves Ducts 1, 3 and 5 can have closed or open ends Ducts closed when the manifold is full or when pressure zones are being used Blanking plate for vacant positions Versions Vacant position cover for 5/2 or 5/3-way valve
Manifold block for expansion 2 valve positions For CPE10, CPE14 or CPE18 For 5/2 and 5/3-way valves Ducts 1, 3 and 5 can have closed or open ends
End plate for additional air supply For CPE10, CPE14 or CPE18 Required for manifolds with more than 6 valves or separate pressure zones Ports 1, 3 and 5 at rear and on top
Internet: www.festo.com/catalogue/...
-V- New
CPE-PRS Solenoid valves CPE, Compact Performance
Key features Mounting on fixed-grid manifold block for CPE10, CPE14 and CPE18 Simple structure comprising compact valve manifolds with in-line valves Mounting with stable retainer and special moulded seal guarantee leak-free assembly 2 to 10 valve positions Aluminium mounting rail provides high stability High flow rates with air supply on both sides for duct 1 High exhaust capacity with output on both sides for ducts 3 and 5 Different pressure and exhaust zones can be created using separators, which are clamped at the separation points in ducts 1, 3 and 5
Internet: www.festo.com/catalogue/...
End block
Expansion block
Expansion block
Internet: www.festo.com/catalogue/...
x y 4
22
22
22
23 3
23 3
23 3
14 mm
3 36
3 36
3 36
3 36
37
37
37
Internet: www.festo.com/catalogue/...
3/2-way single solenoid valve, normally closed CPE18-M1H-3GL 24 CPE18-M2H-3GL 110 CPE18-M3H-3GL 220 CPE18-P1-3GL Y2) X1) 3/2-way single solenoid valve, normally open CPE18-M1H-3OL 24 CPE18-M2H-3OL 110 CPE18-M3H-3OL 220 CPE18-P1-3OL Y2) X1) 5/2-way single solenoid valve CPE18-M1H-5L 24 CPE18-M2H-5L 110 CPE18-M3H-5L 220 CPE18-P1-5L Y2) X1) 5/2-way double solenoid valve CPE18-M1H-5J 24 CPE18-M2H-5J 110 CPE18-M3H-5J 220 CPE18-P1-5J Y2) X1) 5/3-way single solenoid valve, normally closed, mid-position valve CPE18-M1H-5/3G 24 CPE18-M2H-5/3G 110 CPE18-M3H-5/3G 220 CPE18-P1-5/3G Y2) X1) 5/3-way single solenoid valve, normally open, mid-position valve CPE18-M1H-5/3B 24 CPE18-M2H-5/3B 110 CPE18-M3H-5/3B 220 CPE18-P1-5/3B Y2) X1) 5/3-way single solenoid valve, normally exhausted, mid-position valve CPE18-M1H-5/3E 24 CPE18-M2H-5/3E 110 CPE18-M3H-5/3E 220 CPE18-P1-5/3E Y2) X1)
56 49 9
56 5 50
56 5 50
56 5 51
56 5 51
56 5 51
56
1) 2)
X = 12 V DC or 24 V DC pilot valve can be ordered Y = 24 V AC, 110 V AC or 230 V AC pilot valve can be ordered
Internet: www.festo.com/catalogue/...
3/2-way single solenoid valve, normally closed CPE24-M1H-3GL 24 CPE24-M2H-3GL 110 CPE24-M3H-3GL 220 3/2-way single solenoid valve, normally open CPE24-M1H-3OL 24 CPE24-M2H-3OL 110 CPE24-M3H-3OL 220 5/2-way single solenoid valve CPE24-M1H-5L 24 CPE24-M2H-5L 110 CPE24-M3H-5L 220 5/2-way double solenoid valve CPE24-M1H-5J 24 CPE24-M2H-5J 110 CPE24-M3H-5J 220 5/3-way single solenoid valve, normally closed, mid-position valve CPE24-M1H-5/3G 24 CPE24-M2H-5/3G 110 CPE24-M3H-5/3G 220 5/3-way single solenoid valve, normally open, mid-position valve CPE24-M1H-5/3B 24 CPE24-M2H-5/3B 110 CPE24-M3H-5/3B 220 5/3-way single solenoid valve, normally exhausted, mid-position valve CPE24-M1H-5/3E 24 CPE24-M2H-5/3E 110 CPE24-M3H-5/3E 220
68
69 9
69 9
7 70
7 70
7 70
Internet: www.festo.com/catalogue/...
Type Width
Standard nominal flow rate [l/min] Thread M5 M7 Gx G Gy Plug connector g QS-4 QS-6 QS-8 QS-10 QS-12 5/2-way single solenoid valves
Type Width
Standard nominal flow rate [l/min] Thread M5 M7 Gx G Gy Plug connector g QS-4 QS-6 QS-8 QS-10 QS-12 Operating voltage 12 V DC 24 V DC/AC 110 V AC 230 V AC Technical data
/ 18
/ 31
45
64
10
Internet: www.festo.com/catalogue/...
Type Width
Standard nominal flow rate [l/min] Thread M5 M7 Gx G Gy Plug connector g QS-4 QS-6 QS-8 QS-10 QS-12 5/3-way valves
Type Width
CPE14 14 mm 700 ... 750 370 ... 410 570 ... 720
CPE18 18 mm 1,200 ... 1,450 780 ... 850 1,000 ... 1,050
Standard nominal flow rate [l/min] Thread M5 M7 Gx G Gy Plug connector g QS-4 QS-6 QS-8 QS-10 QS-12 Operating voltage 12 V DC 24 V DC/AC 110 V AC 230 V AC Technical data
/ 18
/ 31
45
64
Internet: www.festo.com/catalogue/...
11
7 8 9 aJ
aJ 4 4 5
Accessories Individual valve Type 1 2 3 4 5 6 7 8 9 aJ Manual override tool Silencer Inscription labels Push-in fittings M7 to M5 reducer Illuminating seal Plug socket with cable Plug socket with cable Standard plug socket Plug socket with cable AHB U or UC IBS-6x10 QS MEBLD KMEB KMEB MSSD-EB KMYZ-9 Brief description For port 3, 5, 82 or 84 For tubing Included in scope of delivery For 0 230 V AC With LED for 24 V DC With LED for 24 V DC CPE10 CPE14 CPE18 CPE24 74 74 74 73 73 73 73 72 Page/Internet
12
Internet: www.festo.com/catalogue/...
aA
aA
aJ
5 4 6 3 1 7
Example of manifold assembly CPE18 Type 1 2 3 4 5 6 7 8 9 aJ aA Manifold block Manifold block Seal Blanking plate Blanking plate 3/2-way valve 5/2-way valve 5/3-way valve Retainer Retainer Screw CPE18-3/2-PRS-y-8 CPE18-PRS-y-10 CPV18-VI-P.-150 CPE18-RP3 CPE18-RP CPE18 CPE18 CPE18 CPE18-H3-50 CPE18-H5-50 M4X65-8.8-VS-100 Brief description Manifold block for 3/2-way valves Manifold block for 5/2 and 5/3-way valves Blanking plate for unused/vacant position Blanking plate for unused/vacant position Retainer for 3/2-way valve Retainer for 5/2 and 5/3-way valve 59 57 57 59 57 49 50 51 59 57 57 Page/Internet
Internet: www.festo.com/catalogue/...
13
1 aD aG aC aE
aD aG
aF aE aD
aC aB
aD
aC aB 6
aD 3 aG aE aD
aC aB
aA aJ 9 8 7 Accessories Type 1 2 3 4 5 6 7 8 9 aJ aA aB aC aD aE aF aG Valve manifold CPE10 Valve manifold CPE10 Valve manifold CPE18 Plug socket with cable Plug socket with cable Plug socket with cable Plug socket with cable Plug socket with cable Plug socket Plug socket with cable Illuminating seal Separator Silencer Push-in fittings Blanking plug Silencer Inscription label KMYZ-9-LED SIM, NEBU SIM, NEBU KMEB-1-LED KMEB-1 MSSD-EB KMEB-2-LED MEB-LD VABD, PRSV U, UC QS B UC-H IBS Brief description Equipped with 3/2-way valves with square plug Equipped with 3/2-way valves with round plug Equipped with 3/2-way basic valves plus pilot valve with square plug as required For CPE10 and CPE14, integrated current reduction and LED For CPE10 and CPE14 with round plug M8x1, straight For CPE10 and CPE14 with round plug M8x1, straight With PVC cable and integrated LED With PVC cable With PUR cable and integrated LED For signal display with LED For pressure zones in aluminium manifold blocks With thread For tubing (included in scope of delivery for QS types) With push-in sleeve 72 72 72 73 73 73 73 73 74 74 74 74 74 Page/Internet
14
Internet: www.festo.com/catalogue/...
-V- New
CPE-PRS Solenoid valves CPE, Compact Performance
Peripherals overview Accessories CPE18 and CPE24 3 4 6 5 7 7 8 7
2 1 aJ
aB aA 5 4 8 7 9 aJ 1 2 3
Accessories Mounting on manifold block Type 1 2 3 4 5 6 7 8 9 aJ aA aB Plug socket with cable Plug socket with cable Standard plug socket Plug socket with cable Illuminating seal Inscription label Push-in fittings Blanking plug Silencer Separator for pressure zones Blanking plate Manifold block KMEB-1 KMEB-1 MSSD-EB KMEB-2 MEB-LD IBS-6x10 QS B U or UC VABD, PRSV CPE-RP CPE-PRS
Brief description With LED for 24 V DC For 0 230 V AC For 0 230 V AC For tubing For fitting on exhaust ports For fitting on the manifold block For fitting on unused valve positions 73 73 73 73 73 74 74 74 74
Page/Internet
Internet: www.festo.com/catalogue/...
15
1 2 1
9 9 4 2 aJ 9 9 5 9 9 8 9 8 6 5 7 3
8 aB aA
aA
Accessories Manifold assembly Type 1 2 3 4 5 6 7 8 9 aJ aA aB Solenoid valve Blanking plate Slide End plate Expansion block Manifold block Manifold block Connecting piece Seal Fitting Silencer Push-in fitting CPE CPE-RP _ CPE-PRS-EP CPE-PRSE-2 CPE-PRSG-2 CPE-PRSG-3 U or UC QS Brief description For sealing vacant positions For attaching the valve For 2 valves For 2 valves For 3 valves For connecting the blocks Included in scope of delivery Included in scope of delivery For tubing Page/Internet
16
Internet: www.festo.com/catalogue/...
Operating voltage Square plug M1BH M1H M2H M3H 24 V DC for CPE10 and CPE14 24 V DC for CPE18 and CPE24 110 V AC for CPE18 and CPE24 230 V AC for CPE18 and CPE24
Round plug M1CH 24 V DC for CPE10 and CPE14 Valve function 3 5L 5J 5/3 3/2-way 5/2-way, single solenoid, pneumatic spring return 5/2-way, double solenoid 5/3-way, single solenoid
Normal position GL OL B E G Closed, pneumatic reset for 3/2 Open, pneumatic reset Open Exhausted Closed
Pneumatic connection Female thread M5 M5 for CPE10, not with round plug M7 M7 for CPE10 x Gx for CPE14 G for CPE18 y Gy for CPE24 Plug connector for standard O.D. tubing, not with round plug CPE10 and CPE14 QS-4 Tubing O.D. 4 mm for CPE10 QS-6 Tubing O.D. 6 mm for CPE10 and CPE14 QS-8 Tubing O.D. 8 mm for CPE14 and CPE18 QS-10 Tubing O.D. 10 mm for CPE18 and CPE24 QS-12 Tubing O.D. 12 mm for CPE24 Generation B B series for CPE10 5/3 way valve
Internet: www.festo.com/catalogue/...
17
-K-M-P-
Width 10 mm
Voltage 24 V DC
General technical data Valve function Normal position Memory stability Pneumatic spring reset method Mechanical spring reset method Design Sealing principle Actuation type Control type Pilot air supply Direction of flow Exhaust function Manual override Type of mounting Mounting position Pneumatic connection 1, 2, 4 3, 5 12, 14 82, 84 Nominal diameter Standard nominal flow rate M5 Standard nominal flow rate M7 Standard nominal flow rate QS4 Standard nominal flow rate QS6 Switching time on/off Changeover time Duty cycle Width Corrosion resistance class
1) 2) 3) 4)
3/2
5/2
[mm] [l/min] [l/min] [l/min] [l/min] [ms] [ms] [%] [mm] CRC
G1) O2) G1) Single Double Single Yes No No Yes Piston spool Soft Electric Piloted Internal or external Reversible for external pilot air supply Flow control Non-detenting, detenting with accessory Using through holes Any Threaded connection: M5, M7; QS connection: 4 or 6 mm Threaded connection: M7 Threaded connection: M3; QS connection: 3 Threaded connection: M3 4 190 180 400 350 190 180 300 350 320 300 14/14 16/20 16/20 8 100 10 24)
300
250 250
G = Normally closed O,B = Normally open E = Normally exhausted Corrosion resistance class 2 as per Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents.
18
Internet: www.festo.com/catalogue/...
3/2
5/2 single
5/2 double
5/3
Filtered compressed air, lubricated or unlubricated, grade of filtration 40 m, vacuum 2.5 8 38 0.9 +10 2.5 8 38 5 +50 5 +50 c UL us - Recognised (OL), Germanischer Lloyd
Pilot pressure Ambient temperature Temperature of medium Certification for solenoid valves
Electrical data Operating voltage M1BH, M1CH Power consumption M1BH, M1CH Protection class with plug socket Max. tightening torque of M1CH plug socket M8x1 [V DC] [W] [Nm] 24 +10/15% 1.28 IP65 (EN 60529) 0.4
1 2 3
Internet: www.festo.com/catalogue/...
19
20
Internet: www.festo.com/catalogue/...
Pin 1 not allocated Pin 2 not allocated Pin 3 0 V DC Pin 4 24 V DC 1 Manual override 2 Connection for plug socket M8x1 3 Location for inscription labels 4 Port 12/14 for external pilot air
Internet: www.festo.com/catalogue/...
21
Plug socket
Voltage
Connection
Weight [g]
Part No.
Type
M5 M7 QS-4 QS-6 M7
40 40
M5 M7 QS-4 QS-6 M7
40 40
M5 M7 QS-4 QS-6 M7
40 40
M5 M7 QS-4 QS-6 M7
56 56
M5 M7 QS-4 QS-6 M7
68 68
M5 M7 QS-4 QS-6 M7
56 56
M8x1
M5 M7 QS-4 QS-6 M7
68 68
22
Internet: www.festo.com/catalogue/...
Plug socket
Voltage
Connection
Weight [g] 68 68
Part No.
Type
Square q
24 V DC
M5 M7 QS-4 QS-6 M7
Square q
24 V DC
M5 M7 QS-4 QS-6 M7
68 68
Square q
24 V DC
M5 M7 QS-4 QS-6 M7
68 68
Square q
24 V DC
M5 M7 QS-4 QS-6 M7
68 68
Square q
24 V DC
M5 M7 QS-4 QS-6 M7
68 68
Square q
24 V DC
M8x1
M5 M7 QS-4 QS-6 M7
68 68
Internet: www.festo.com/catalogue/...
23
-V- New
CPE-PRS Manifold blocks CPE10
Technical data Manifold block Manifold block CPE-PRS Material: Wrought aluminium alloy
www.festo.com
24
Internet: www.festo.com/catalogue/...
-V- New
CPE10-PRS Manifold blocks CPE10
Ordering data Fixed-grid manifold block Ordering data Valve positions Manifold block for 5/2 and 5/3-way valves 2 3 4 5 6 7 8 9 10
1)
CRC
Weight [g] 131 179 227 275 323 371 419 467 515
Part No.
Type
21)
Corrosion resistance class 2 as per Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents.
Ordering data Material Blanking plate for vacant positions Polyamide Part No. 544479 Type CPE10-RP
Retainer set Retainer: High-alloy stainless steel Screws: Galvanised steel Seals: Nitrile rubber 544394 CPE10-H5-SET
Ordering data Material Retainer Retainer: High-alloy stainless steel (Packaging unit 50 pieces) 547045 CPE10-H5-50 Part No. Type
Screws Galvanised steel (Packaging unit 100 pieces) Seals Nitrile rubber (Packaging unit 150 pieces) 547051 CPV10-VI-P.M7-150 547048 M3X40-8.8-VS-100
Internet: www.festo.com/catalogue/...
25
-V- New
CPE10-PRS Manifold blocks CPE10
Technical data Fixed-grid manifold block Manifold block for CPE10 3/2 Material: Wrought aluminium alloy RoHS-compliant
www.festo.com
2 Retainer
3 Blanking plate
4 Valves
26
Internet: www.festo.com/catalogue/...
-V- New
CPE10-PRS Manifold blocks CPE10
Ordering data Fixed-grid manifold block Ordering data Valve positions CRC Max. tightening torque of valve mounting [Nm] 1.2 Weight [g] 128 164 201 237 274 310 347 383 420 550550 550551 550552 550553 550554 550555 550556 550557 550558 CPE10-3/2-PRS--2 CPE10-3/2-PRS--3 CPE10-3/2-PRS--4 CPE10-3/2-PRS--5 CPE10-3/2-PRS--6 CPE10-3/2-PRS--7 CPE10-3/2-PRS--8 CPE10-3/2-PRS--9 CPE10-3/2-PRS--10 Part No. Type
21)
Corrosion resistance class 2 as per Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents.
Ordering data Material Blanking plate Polyamide RoHS-compliant 550580 CPE10-RP3 Part No. Type
Retainer set Retainer: High-alloy stainless steel Screws: Galvanised steel Seals: Nitrile rubber RoHS-compliant 550577 CPE10-H3-SET
Ordering data Material Retainer Retainer: High-alloy stainless steel (Packaging unit 50 pieces) 551490 CPE10-H3-50 Part No. Type
Screws Galvanised steel (Packaging unit 100 pieces) Seals Nitrile rubber (Packaging unit 150 pieces)
1) Packaging unit quantity
547048
M3X40-8.8-VS-100
547051
CPV10-VI-P.M7-150
Internet: www.festo.com/catalogue/...
27
www.festo.com
1 Manifold block CPE-PRSG-2 for 2 valves 2 Manifold block CPE-PRSG-3 for 3 valves Size CPE10 Size CPE10
1)
3 Expansion block CPE-PRSE-2 for 2 valves 4 End block CPE-PRS-EP 5 Blanking plate CPE-PRSB B2 87 B3 37 L11) 24+(nx12)+11.4 B4 73 B5 71 L2 24
B1 93.5 H4 37
B6 60 L3 24
B7 7 L4 36
D1 G L5 11.4
D2 3.3 L6 9.6
H1 ~72 L7
H2 ~40 L8 3.2
H3 ~34 L9 24
28
Internet: www.festo.com/catalogue/...
One p pressure zone 1x CPE-PRSG-2 1x CPE-PRSG-3 1x CPE-PRSGO-2 1x CPE-PRSE-2 1x CPE-PRSGO-3 1x CPE-PRSE-2 1x CPE-PRSGO-2 1x CPE-PRSEO-2 1x CPE-PRSE-2 1x CPE-PRSGO-3 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSEO-2 1x CPE-PRS-EP
Two pressure zones Variant 1 1x CPE-PRSG-2 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 5x CPE-PRSEO-2 1x CPE-PRS-EP
Variant 2
1x CPE-PRSGO-2 1x CPE-PRSE-2 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 1x CPE-PRSE-2 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSE-2 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 1x CPE-PRSE-2 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSE-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 1x CPE-PRSE-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSE-2 4x CPE-PRSEO-2 1x CPE-PRS-EP
10
11
12
-H-
Note
A maximum of 6 valve positions are possible per air supply. Use valve manifold blocks only in combination with 5/2-way and 5/3-way valves.
Internet: www.festo.com/catalogue/...
29
Open
50
187827
CPE10-PRSGO-2
Open
70
187819
CPE10-PRSGO-3
Open
40
187828
CPE10-PRSEO-2
10
164963
CPE10-PRSB
30
Internet: www.festo.com/catalogue/...
-K-M-P-
Width 14 mm
Voltage 24 V DC
General technical data Valve function Normal position Memory stability Pneumatic spring reset method Mechanical spring reset method Design Sealing principle Actuation type Control type Pilot air supply Direction of flow Exhaust function Manual override Type of mounting Mounting position Pneumatic connection 1, 2, 4 3, 5 12, 14 82, 84 Nominal diameter Standard nominal flow rate Gx Standard nominal flow rate QS6 Standard nominal flow rate QS8 Switching time on/off Changeover time Duty cycle Width Corrosion resistance class
1) 2) 3) 4)
3/2
5/2
G1) O2) Single Double Yes No Piston spool Soft Electric Piloted Internal or external Reversible for external pilot air supply Flow control Non-detenting, detenting via accessory Using through holes Any Threaded connection: Gx; QS connection: 6 or 8 mm Threaded connection: Gx Threaded connection: M3; QS connection: 3 Threaded connection: M3 6 900 800 510 400 810 680 16/27 24/32 12 100 14 24)
G = Normally closed O,B = Normally open E = Normally exhausted Corrosion resistance class 2 as per Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents.
Internet: www.festo.com/catalogue/...
31
3/2
5/2 single
5/2 double
5/3
Filtered compressed air, lubricated or unlubricated, grade of filtration 40 m, vacuum 2.5 8 38 28 38 0.9 +10 2.5 8 38 28 5 +50 5 +50 c UL us - Recognised (OL), Germanischer Lloyd 38
Pilot pressure Ambient temperature Temperature of medium Certification for solenoid valves
Electrical data Operating voltage M1BH, M1CH Power consumption M1BH, M1CH Protection class with plug socket Max. tightening torque of M1CH plug socket M8x1 [V DC] [W] [Nm] 24 +10/15% 1.28 IP65 (EN 60529) 0.4
1 2 3
32
Internet: www.festo.com/catalogue/...
1 Manual override facility 2 Connection for plug socket 3 Location for inscription labels 4 Port 10/12 for external pilot air 5 QS push-in fitting 6 QS push-in fitting
www.festo.com
1 2 3 4
Manual override facility Connection for plug socket Location for inscription labels Port 12/14 for external pilot air 5 QS push-in fitting 6 QS push-in fitting
Internet: www.festo.com/catalogue/...
33
1 2 3 4
Manual override facility Connection for plug socket Location for inscription labels Port 12/14 for external pilot air 5 QS push-in fitting 6 QS push-in fitting
www.festo.com
1 Manual override facility 2 Connection for plug socket 3 Location for inscription labels 4 Port 12/14 for external pilot air 5 QS push-in fitting 6 QS push-in fitting
34
Internet: www.festo.com/catalogue/...
Internet: www.festo.com/catalogue/...
35
Plug socket
Voltage
Connection
Weight [g]
Part No.
Type
Gx QS-6 QS-8 Gx
60 60
Gx QS-6 QS-8 Gx
60 60
Gx QS-6 QS-8 Gx
60 60
Gx QS-6 QS-8 Gx
95 95
Gx QS-6 QS-8 Gx
115 115
Gx QS-6 QS-8 Gx
95 95
M8x1
Gx QS-6 QS-8 Gx
115 115
36
Internet: www.festo.com/catalogue/...
Plug socket
Voltage
Connection
Part No.
Type
Square q
24 V DC
Gx QS-6 QS-8 Gx
Square q
24 V DC
Gx QS-6 QS-8 Gx
120 120
Square q
24 V DC
Gx QS-6 QS-8 Gx
120 120
Square q
24 V DC
Gx QS-6 QS-8 Gx
120 120
Square q
24 V DC
Gx QS-6 QS-8 Gx
120 120
Square q
24 V DC
M8x1
Gx QS-6 QS-8 Gx
120 120
Internet: www.festo.com/catalogue/...
37
-V- New
CPE14-PRS Manifold blocks CPE14
Technical data Manifold block Manifold block CPE-PRS Material: Wrought aluminium alloy RoHS-compliant
www.festo.com
38
Internet: www.festo.com/catalogue/...
-V- New
CPE-PRS Manifold blocks CPE14
Ordering data Fixed-grid manifold block Ordering data Valve positions Manifold block for 5/2-way and 5/3-way valves 2 3 4 5 6 7 8 9 10
1)
CRC
Weight [g] 239 326 412 498 584 671 757 843 930
Part No.
Type
21)
Corrosion resistance class 2 as per Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents.
Ordering data Material Blanking plate for vacant positions Polyamide Part No. 544480 Type CPE14-RP
Retainer set Retainer: High-alloy stainless steel Screws: Galvanised steel Seals: Nitrile rubber 544395 CPE14-H5-SET
Ordering data Material Retainer Retainer: High-alloy stainless steel (Packaging unit 50 pieces) 547046 CPE14-H5-50 Part No. Type
Screws Galvanised steel (Packaging unit 100 pieces) Seals Nitrile rubber (Packaging unit 150 pieces) 547052 CPV14-VI-P.x-150 547049 M3X45-8.8-VS-100
Internet: www.festo.com/catalogue/...
39
-V- New
CPE14-PRS Manifold blocks CPE14
Technical data Fixed-grid manifold block Manifold block for CPE14 3/2 Material: Wrought aluminium alloy RoHS-compliant
www.festo.com
2 Retainer
3 Blanking plate
4 Valves
40
Internet: www.festo.com/catalogue/...
-V- New
CPE-PRS Manifold blocks CPE14
Ordering data Fixed-grid manifold block Ordering data Valve positions CRC Max. tightening torque of valve mounting [Nm] 1.2 Weight [g] 176 228 280 332 384 436 488 540 592 550559 550560 550561 550562 550563 550564 550565 550566 550567 CPE14-3/2-PRS-y-2 CPE14-3/2-PRS-y-3 CPE14-3/2-PRS-y-4 CPE14-3/2-PRS-y-5 CPE14-3/2-PRS-y-6 CPE14-3/2-PRS-y-7 CPE14-3/2-PRS-y-8 CPE14-3/2-PRS-y-9 CPE14-3/2-PRS-y-10 Part No. Type
21)
Corrosion resistance class 2 as per Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents.
Ordering data Material Blanking plate Polyamide 550581 CPE14-RP3 Part No. Type
Retainer set Retainer: High-alloy stainless steel Screws: Galvanised steel Seals: Nitrile rubber 550578 CPE14-H3-SET
Ordering data Material Retainer Retainer: High-alloy stainless steel (Packaging unit 50 pieces) 551491 CPE14-H3-50 Part No. Type
Screws Galvanised steel (Packaging unit 100 pieces) Seals Nitrile rubber (Packaging unit 150 pieces)
1) Packaging unit quantity
547049
M3X45-8.8-VS-100
547052
CPV14-VI-P.x-150
Internet: www.festo.com/catalogue/...
41
www.festo.com
1 Manifold block CPE-PRSG-2 for 2 valves 2 Manifold block CPE-PRSG-3 for 3 valves
3 Expansion block CPE-PRSE-2 for 2 valves 4 End block CPE-PRS-EP 5 Blanking plate CPE-PRSB
B1 114.6 H4 46.4
B2 105.6
B3 50 L11) 32+(nx16)+12.4
B4 93
B5 89 L2 32
B6 80 L3 32
B7 3 L4 48
D1 Gy L5 12.4
D2 4.3 L6 10.1
H1 ~84 L7
H2 ~48 L8 4
H3 ~40 L9 32
42
Internet: www.festo.com/catalogue/...
One p pressure zone 1x CPE-PRSG-2 1x CPE-PRSG-3 1x CPE-PRSGO-2 1x CPE-PRSE-2 1x CPE-PRSGO-3 1x CPE-PRSE-2 1x CPE-PRSGO-2 1x CPE-PRSEO-2 1x CPE-PRSE-2 1x CPE-PRSGO-3 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSEO-2 1x CPE-PRS-EP
Two pressure zones Variant 1 1x CPE-PRSG-2 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 5x CPE-PRSEO-2 1x CPE-PRS-EP
Variant 2
1x CPE-PRSGO-2 1x CPE-PRSE-2 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 1x CPE-PRSE-2 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSE-2 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 1x CPE-PRSE-2 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSE-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 1x CPE-PRSE-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSE-2 4x CPE-PRSEO-2 1x CPE-PRS-EP
10
11
12
-H-
Note
A maximum of 6 valve positions are possible per air supply. Use valve manifold blocks only in combination with 5/2-way and 5/3-way valves.
Internet: www.festo.com/catalogue/...
43
Gy
Open
95
187829
CPE14-PRSGO-2
Gy
Open
130
187820
CPE14-PRSGO-3
Open
85
187830
CPE14-PRSEO-2
15
164968
CPE14-PRSB
44
Internet: www.festo.com/catalogue/...
-K-M-P-
Width 18 mm
Flow rate 850 1,500 l/min Voltage for Complete valves 24 V DC, 110, 230 V AC Basic valves 12, 24 V DC, 24, 110, 230 V AC
General technical data Valve function Normal position Memory stability Pneumatic spring reset method Mechanical spring reset method Design Sealing principle Actuation type Control type Pilot interface Pilot air supply Direction of flow Exhaust function Manual override Type of mounting Mounting position Pneumatic connection 1, 2, 4 3, 5 12, 14 82, 84 Nominal diameter Standard nominal flow rate G Standard nominal flow rate QS8 Standard nominal flow rate QS10 Switching time on/off Changeover time Duty cycle Width Conforms to Corrosion resistance class
1) 2) 3) 4)
3/2
5/2
G1) O2) Single Double Yes No Piston spool Soft Electric Piloted To ISO 15218 or none in the case of integrated pilot valve Internal or external Reversible for external pilot air supply Flow control Non-detenting, detenting via accessory Using through holes Any Threaded connection: G; QS connection: 8 or 10 mm Threaded connection: G Threaded connection: M5; QS connection: 4 Threaded connection: M5 8 1,300 1,300 850 1,000 28/18, 36/305) 26/20, 32/305) 13, 155) 100 18 ISO 15218 in the case of interface with pilot valve 24)
1,450
1,300
5)
G = Normally closed O,B = Normally open E = Normally exhausted Corrosion resistance class 2 as per Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents. Switching time for basic valve
Internet: www.festo.com/catalogue/...
45
3/2
5/2 single
5/2 double
5/3
Filtered compressed air, lubricated or unlubricated, grade of filtration 40 m, vacuum 2.5 10 2 10 2.5 10 0.9 +10 2.5 10 2 10 5 +50 5 +50 c UL us - Recognised (OL), Germanischer Lloyd 2.5 10
Pilot pressure Ambient temperature Temperature of medium Certification for solenoid valves
Electrical data Operating voltage p g g M1H M2H M3H Power consumption p M1H M2H, M3H Protection class with plug socket [V DC] [V AC] [V AC] [W] [VA] 24 +10/15% 110 10% at 50 60 Hz 230 10% at 50 60 Hz 1.5 Pull: 3, hold: 2.4 IP65 (EN 60529)
1 2 3
46
Internet: www.festo.com/catalogue/...
1 Manual override 2 Connection for plug socket type C 3 Location for inscription labels 4 Port 10/12 for external pilot air 5 QS push-in fitting 6 QS push-in fitting
www.festo.com
1 Manual override 2 Connection for plug socket type C 3 Location for inscription labels 4 Port 12/14 for external pilot air 5 QS push-in fitting 6 QS push-in fitting
Internet: www.festo.com/catalogue/...
47
1 Manual override 2 Connection for plug socket type C 3 Location for inscription labels 4 Port 12/14 for external pilot air 5 QS push-in fitting 6 QS push-in fitting
www.festo.com
1 Manual override 2 Connection for plug socket type C 3 Location for inscription labels 4 Port 12/14 for external pilot air 5 QS push-in fitting 6 QS push-in fitting
48
Internet: www.festo.com/catalogue/...
Voltage
Connection
Weight [g]
Part No.
Type
110 V AC
230 V AC 3
Normally open Internal 24 V DC G QS-8 QS-10 G QS-8 QS-10 G QS-8 QS-10 150 150 150 163140 163148 163156 163760 163768 163776 163784 163792 163800 CPE18-M1H-3OL- CPE18-M1H-3OL-QS-8 CPE18-M1H-3OL-QS-10 CPE18-M2H-3OL- CPE18-M2H-3OL-QS-8 CPE18-M2H-3OL-QS-10 CPE18-M3H-3OL- CPE18-M3H-3OL-QS-8 CPE18-M3H-3OL-QS-10
110 V AC
230 V AC 3
Normally closed External 24 V DC G QS-8 QS-10 G QS-8 QS-10 G QS-8 QS-10 150 150 150 163145 163153 163161 163765 163773 163781 163789 163797 163805 CPE18-M1H-3GLS- CPE18-M1H-3GLS-QS-8 CPE18-M1H-3GLS-QS-10 CPE18-M2H-3GLS- CPE18-M2H-3GLS-QS-8 CPE18-M2H-3GLS-QS-10 CPE18-M3H-3GLS- CPE18-M3H-3GLS-QS-8 CPE18-M3H-3GLS-QS-10
110 V AC
230 V AC 3
Normally open External 24 V DC G QS-8 QS-10 G QS-8 QS-10 G QS-8 QS-10 150 150 150 163144 163152 163160 163764 163772 163780 163788 163796 163804 CPE18-M1H-3OLS- CPE18-M1H-3OLS-QS-8 CPE18-M1H-3OLS-QS-10 CPE18-M2H-3OLS- CPE18-M2H-3OLS-QS-8 CPE18-M2H-3OLS-QS-10 CPE18-M3H-3OLS- CPE18-M3H-3OLS-QS-8 CPE18-M3H-3OLS-QS-10
110 V AC
230 V AC 3
Internet: www.festo.com/catalogue/...
49
Voltage
Connection
Weight [g]
Part No.
Type
110 V AC
230 V AC 3
5/2-way double solenoid valve Internal 24 V DC G QS-8 QS-10 G QS-8 QS-10 G QS-8 QS-10 270 270 270 163143 163151 163159 163763 163771 163779 163787 163795 163803 CPE18-M1H-5J- CPE18-M1H-5J-QS-8 CPE18-M1H-5J-QS-10 CPE18-M2H-5J- CPE18-M2H-5J-QS-8 CPE18-M2H-5J-QS-10 CPE18-M3H-5J- CPE18-M3H-5J-QS-8 CPE18-M3H-5J-QS-10
110 V AC
230 V AC 3
5/2-way single solenoid valve External 24 V DC G QS-8 QS-10 G QS-8 QS-10 G QS-8 QS-10 220 220 220 163146 163154 163162 163766 163774 163782 163790 163798 163806 CPE18-M1H-5LS- CPE18-M1H-5LS-QS-8 CPE18-M1H-5LS-QS-10 CPE18-M2H-5LS- CPE18-M2H-5LS-QS-8 CPE18-M2H-5LS-QS-10 CPE18-M3H-5LS- CPE18-M3H-5LS-QS-8 CPE18-M3H-5LS-QS-10
110 V AC
230 V AC 3
5/2-way double solenoid valve External 24 V DC G QS-8 QS-10 G QS-8 QS-10 G QS-8 QS-10 270 270 270 163147 163155 163163 163767 163775 163783 163791 163799 163807 CPE18-M1H-5JS- CPE18-M1H-5JS-QS-8 CPE18-M1H-5JS-QS-10 CPE18-M2H-5JS- CPE18-M2H-5JS-QS-8 CPE18-M2H-5JS-QS-10 CPE18-M3H-5JS- CPE18-M3H-5JS-QS-8 CPE18-M3H-5JS-QS-10
110 V AC
230 V AC 3
50
Internet: www.festo.com/catalogue/...
Voltage
Connection
Part No.
Type
24 V DC
110 V AC
230 V AC 3
24 V DC
110 V AC
230 V AC 3
24 V DC
110 V AC
230 V AC 3
Internet: www.festo.com/catalogue/...
51
Voltage
Connection
Part No.
Type
24 V DC
110 V AC
230 V AC 3
24 V DC
110 V AC
230 V AC 3
24 V DC
110 V AC
230 V AC 3
52
Internet: www.festo.com/catalogue/...
-V- New
1 2 3
www.festo.com
1 Manual override, non-detenting 2 Pilot valve with plug pattern to DIN EN 175301-803 type C 3 Pin only available for solenoid valve with 110 and 230 V (protective earth conductor) 4 Location for inscription label 5 Port 10/12 for external pilot air
Internet: www.festo.com/catalogue/...
53
-V- New
1 Manual override, non-detenting 2 Pilot valve with plug pattern to DIN EN 175301-803 type C 3 Pin only available for solenoid valve with 110 and 230 V (protective earth conductor) 4 Location for inscription label 5 Port 10/12 for external pilot air
www.festo.com
1 Manual override, non-detenting 2 Pilot valve with plug pattern to DIN EN 175301-803 type C 3 Pin only available for solenoid valve with 110 and 230 V (protective earth conductor) 4 Location for inscription label 5 Port 10/12 for external pilot air
54
Internet: www.festo.com/catalogue/...
-V- New
1 Manual override, non-detenting 2 Pilot valve with plug pattern to DIN EN 175301-803 type C 3 Pin only available for solenoid valve with 110 and 230 V (protective earth conductor) 4 Location for inscription label 5 Port 10/12 for external pilot air
Internet: www.festo.com/catalogue/...
55
-V- New
Ordering data 5/2-way single solenoid valve without pilot valve Design
Ordering data 5/2-way double solenoid valve without pilot valve Design
Ordering data 5/3-way mid-position valve without pilot valve Design Normal position Closed Open Exhausted Closed Open Exhausted
External
Ordering data Pilot valve to ISO 15218 Design g Plug, square design g, q g
Output
Voltage
Part No.
Type yp
[VA]
[V DC] 24 12
Yes Yes No
230 110 24
56
Internet: www.festo.com/catalogue/...
-V- New
CPE18-PRS Manifold blocks CPE18
Technical data Fixed-grid manifold block Manifold block for CPE18 5/2 and 5/3 Material: Wrought aluminium alloy RoHS-compliant
www.festo.com
Internet: www.festo.com/catalogue/...
57
-V- New
CPE-PRS Manifold blocks CPE18
Ordering data Fixed-grid manifold block Ordering data Valve positions CRC Max. tightening torque of valve mounting [Nm] 2 Weight [g] 353 482 611 740 870 999 1128 1257 1386 543839 543840 543841 543842 543843 543844 543845 543846 543847 CPE18-PRS-y-2 CPE18-PRS-y-3 CPE18-PRS-y-4 CPE18-PRS-y-5 CPE18-PRS-y-6 CPE18-PRS-y-7 CPE18-PRS-y-8 CPE18-PRS-y-9 CPE18-PRS-y-10 Part No. Type
21)
Corrosion resistance class 2 as per Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents.
Ordering data Material Blanking plate for vacant positions Polyamide Part No. 544481 Type CPE18-RP
Retainer set Retainer: High-alloy stainless steel Screws: Galvanised steel Seals: Nitrile rubber 544396 CPE18-H5-SET
Ordering data Material Retainer Retainer: High-alloy stainless steel (Packaging unit 50 pieces) 547047 CPE18-H5-50 Part No. Type
Screws Galvanised steel (Packaging unit 100 pieces) Seals Nitrile rubber (Packaging unit 150 pieces) 547053 CPV18-VI-P.-150 547050 M4X65-8.8-VS-100
58
Internet: www.festo.com/catalogue/...
-V- New
CPE18-PRS Manifold blocks CPE18
Technical data Fixed-grid manifold block Manifold block for CPE18 3/2 Material: Wrought aluminium alloy
www.festo.com
2 Retainer
3 Blanking plate
4 Valves
Internet: www.festo.com/catalogue/...
59
-V- New
CPE-PRS Manifold blocks CPE18
Ordering data Fixed-grid manifold block Ordering data Valve positions CRC Max. tightening torque of valve mounting [Nm] 2 Weight [g] 266 346 426 507 587 667 748 828 908 550568 550569 550570 550571 550572 550573 550574 550575 550576 CPE18-3/2-PRS-y-2 CPE18-3/2-PRS-y-3 CPE18-3/2-PRS-y-4 CPE18-3/2-PRS-y-5 CPE18-3/2-PRS-y-6 CPE18-3/2-PRS-y-7 CPE18-3/2-PRS-y-8 CPE18-3/2-PRS-y-9 CPE18-3/2-PRS-y-10 Part No. Type
21)
Corrosion resistance class 2 as per Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents.
Ordering data Material Blanking plate Polyamide 550582 CPE18-RP3 Part No. Type
Retainer set Retainer: High-alloy stainless steel Screws: Galvanised steel Seals: Nitrile rubber 550579 CPE18-H3-SET
Ordering data Material Retainer Retainer: High-alloy stainless steel (Packaging unit 50 pieces) 551492 CPE18-H3-50 Part No. Type
Screws Galvanised steel (Packaging unit 100 pieces) Seals Nitrile rubber (Packaging unit 150 pieces)
1) Packaging unit quantity
547050
M4X65-8.8-VS-100
547053
CPV18-VI-P.-150
60
Internet: www.festo.com/catalogue/...
www.festo.com
1 Manifold block CPE-PRSG-2 for 2 valves 2 Manifold block CPE-PRSG-3 for 3 valves Size CPE18 Size CPE18
1)
3 Expansion block CPE-PRSE-2 for 2 valves 4 End block CPE-PRS-EP 5 Blanking plate CPE-PRSB B2 136.5 B3 59 L11) 40+(nx20)+16.4 B4 113 B5 L2 40
B1 151.6 H4 51.4
B6 100 L3 40
B7 2.75 L4 60
D1 G L5 16.4
D2 5.3 L6 12.6
H1 ~106 L7 1
H2 ~58 L8 5.2
H3 ~46 L9 40
Internet: www.festo.com/catalogue/...
61
One p pressure zone 1x CPE-PRSG-2 1x CPE-PRSG-3 1x CPE-PRSGO-2 1x CPE-PRSE-2 1x CPE-PRSGO-3 1x CPE-PRSE-2 1x CPE-PRSGO-2 1x CPE-PRSEO-2 1x CPE-PRSE-2 1x CPE-PRSGO-3 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSEO-2 1x CPE-PRS-EP
Two pressure zones Variant 1 1x CPE-PRSG-2 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-3 4x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSG-2 5x CPE-PRSEO-2 1x CPE-PRS-EP
Variant 2
1x CPE-PRSGO-2 1x CPE-PRSE-2 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 1x CPE-PRSE-2 1x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSE-2 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 1x CPE-PRSE-2 2x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSE-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-3 1x CPE-PRSE-2 3x CPE-PRSEO-2 1x CPE-PRS-EP 1x CPE-PRSGO-2 1x CPE-PRSE-2 4x CPE-PRSEO-2 1x CPE-PRS-EP
10
11
12
-H-
Note
A maximum of 6 valve positions are possible per air supply. Use valve manifold blocks only in combination with 5/2- and 5/3-way valves.
62
Internet: www.festo.com/catalogue/...
Open
170
187831
CPE18-PRSGO-2
Open
225
187821
CPE18-PRSGO-3
Open
145
187832
CPE18-PRSEO-2
28
164974
CPE18-PRSB
Internet: www.festo.com/catalogue/...
63
-K-M-P-
Width 24 mm
Flow rate 1,250 3,200 l/min Voltage 24 V DC, 110, 230 V AC Basic valve 12, 24 V DC, 24, 110, 230 V AC
General technical data Valve function Normal position Memory stability Pneumatic spring reset method Mechanical spring reset method Design Sealing principle Actuation type Control type Pilot air supply Direction of flow Exhaust function Manual override Type of mounting Mounting position Pneumatic connection 1, 2, 4 3, 5 12, 14 82, 84 Nominal diameter Standard nominal flow rate G Standard nominal flow rate QS8 Standard nominal flow rate QS10 Switching time on/off Changeover time Duty cycle Width Corrosion resistance class
1) 2) 3) 4)
3/2
5/2
G1) O2) G1) Single Double Single Yes No No Yes Piston spool Soft Electric Piloted Internal or external Reversible for external pilot air supply Flow control Non-detenting, detenting via accessory Using through holes Any Threaded connection: Gy; QS connection: 10 or 12 mm Threaded connection: Gy Threaded connection: M5; QS connection: 6 Threaded connection: M5 11 2,500 2,900 3,200 3,000 1,250 1,650 50/33 40/50 25/55 25 100 24 24)
2,600 1,600
2,650
G = Normally closed O,B = Normally open E = Normally exhausted Corrosion resistance class 2 as per Festo standard 940 070 Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or lubricating agents.
64
Internet: www.festo.com/catalogue/...
3/2
5/2 single
5/2 double
5/3
Filtered compressed air, lubricated or unlubricated, grade of filtration 40 m, vacuum 2.5 10 2 10 2.5 10 0.9 +10 2.5 10 2 10 5 +50 5 +50 c UL us - Recognised (OL), Germanischer Lloyd 2.5 10
Electrical data Operating voltage p g g M1H M2H M3H Power consumption p M1H M2H, M3H Protection class with plug socket [V DC] [V AC] [V AC] [W] [VA] 24 +10/15% 110 10% at 50 60 Hz 230 10% at 50 60 Hz 1.5 Pull: 3, hold: 2,4 IP65 (EN 60529)
1 2 3
Internet: www.festo.com/catalogue/...
65
1 Manual override 2 Connection for plug socket 3 Location for inscription labels 4 Port 10/12 for external pilot air 5 QS push-in fitting 6 QS push-in fitting
www.festo.com
1 2 3 4 5 6
Manual override Connection for plug socket Location for inscription labels Port 14 for external pilot air QS push-in fitting QS push-in fitting
66
Internet: www.festo.com/catalogue/...
1 2 3 4
Manual override Connection for plug socket Location for inscription labels Port 12/14 for external pilot air 5 QS push-in fitting 6 QS push-in fitting
www.festo.com
1 Manual override 2 Connection for plug socket 3 Location for inscription labels 4 Port 12/14 for external pilot air 5 QS push-in fitting 6 QS push-in fitting
Internet: www.festo.com/catalogue/...
67
Voltage
Connection
Weight [g]
Part No.
Type
110 V AC
230 V AC 3
Normally open Internal 24 V DC Gy QS-10 QS-12 Gy QS-10 QS-12 Gy QS-10 QS-12 220 220 220 163164 163172 163180 163808 163816 163824 163832 163840 163848 CPE24-M1H-3OL-y CPE24-M1H-3OL-QS-10 CPE24-M1H-3OL-QS-12 CPE24-M2H-3OL-y CPE24-M2H-3OL-QS-10 CPE24-M2H-3OL-QS-12 CPE24-M3H-3OL-y CPE24-M3H-3OL-QS-10 CPE24-M3H-3OL-QS-12
110 V AC
230 V AC 3
Normally closed External 24 V DC Gy QS-10 QS-12 Gy QS-10 QS-12 Gy QS-10 QS-12 220 220 220 163169 163177 163185 163813 163821 163829 163837 163845 163853 CPE24-M1H-3GLS-y CPE24-M1H-3GLS-QS-10 CPE24-M1H-3GLS-QS-12 CPE24-M2H-3GLS-y CPE24-M2H-3GLS-QS-10 CPE24-M2H-3GLS-QS-12 CPE24-M3H-3GLS-y CPE24-M3H-3GLS-QS-10 CPE24-M3H-3GLS-QS-12
110 V AC
230 V AC 3
Normally open External 24 V DC Gy QS-10 QS-12 Gy QS-10 QS-12 Gy QS-10 QS-12 220 220 220 163168 163176 163184 163812 163820 163828 163836 163844 163852 CPE24-M1H-3OLS-y CPE24-M1H-3OLS-QS-10 CPE24-M1H-3OLS-QS-12 CPE24-M2H-3OLS-y CPE24-M2H-3OLS-QS-10 CPE24-M2H-3OLS-QS-12 CPE24-M3H-3OLS-y CPE24-M3H-3OLS-QS-10 CPE24-M3H-3OLS-QS-12
110 V AC
230 V AC 3
68
Internet: www.festo.com/catalogue/...
Voltage
Connection
Weight [g]
Part No.
Type
110 V AC
230 V AC 3
5/2-way double solenoid valve Internal 24 V DC Gy QS-10 QS-12 Gy QS-10 QS-12 Gy QS-10 QS-12 390 390 390 163167 163175 163183 163811 163819 163827 163835 163843 163851 CPE24-M1H-5J-y CPE24-M1H-5J-QS-10 CPE24-M1H-5J-QS-12 CPE24-M2H-5J-y CPE24-M2H-5J-QS-10 CPE24-M2H-5J-QS-12 CPE24-M3H-5J-y CPE24-M3H-5J-QS-10 CPE24-M3H-5J-QS-12
110 V AC
230 V AC 3
5/2-way single solenoid valve External 24 V DC Gy QS-10 QS-12 Gy QS-10 QS-12 Gy QS-10 QS-12 360 360 360 163170 163178 163186 163814 163822 163830 163838 163846 163854 CPE24-M1H-5LS-y CPE24-M1H-5LS-QS-10 CPE24-M1H-5LS-QS-12 CPE24-M2H-5LS-y CPE24-M2H-5LS-QS-10 CPE24-M2H-5LS-QS-12 CPE24-M3H-5LS-y CPE24-M3H-5LS-QS-10 CPE24-M3H-5LS-QS-12
110 V AC
230 V AC 3
5/2-way double solenoid valve External 24 V DC Gy QS-10 QS-12 Gy QS-10 QS-12 Gy QS-10 QS-12 390 390 390 163171 163179 163187 163815 163823 163831 163839 163847 163855 CPE24-M1H-5JS-y CPE24-M1H-5JS-QS-10 CPE24-M1H-5JS-QS-12 CPE24-M2H-5JS-y CPE24-M2H-5JS-QS-10 CPE24-M2H-5JS-QS-12 CPE24-M3H-5JS-y CPE24-M3H-5JS-QS-10 CPE24-M3H-5JS-QS-12
110 V AC
230 V AC 3
Internet: www.festo.com/catalogue/...
69
Voltage
Connection
Part No.
Type
24 V DC
110 V AC
230 V AC 3
24 V DC
110 V AC
230 V AC 3
24 V DC
110 V AC
230 V AC 3
70
Internet: www.festo.com/catalogue/...
Voltage
Connection
Part No.
Type
24 V DC
110 V AC
230 V AC 3
24 V DC
110 V AC
230 V AC 3
24 V DC
110 V AC
230 V AC 3
Internet: www.festo.com/catalogue/...
71
Part No.
196064 196065
KMYZ-9-24-M8-0,5-LED-B KMYZ-9-24-M8-2,5-LED-B
Connecting cable M8x1, 4-pin, angled socket/open end 24 V DC 2.5 5 10 Connecting cable M8x1, 4-pin, angled socket/straight plug M8x1, 3-pin 24 V DC 2.5 5 10 Plug socket with cable M8x1, 4-pin, straight socket/open end 24 V DC 2.5 5 Plug socket with cable M8x1, 4-pin, angled socket/open end 24 V DC 2.5 5
164250 164251
164252 164253
SIM-K-4WD-2,5-PU SIM-K-4WD-5-PU
72
Internet: www.festo.com/catalogue/...
Part No.
MSSD-EB-M12
192745
MSSD-EB-S-M14
Plug socket with PVC cable 24 V DC 24 V DC 24 V DC Up to 240 V Up to 240 V Plug socket with PUR cable 24 V DC 24 V DC Up to 240 V Up to 240 V
2.5 5 10 2.5 5
Technical data Internet: kmeb 151688 KMEB-1-24-2,5-LED 151689 KMEB-1-24-5-LED 193457 KMEB-1-24-10-LED 151690 KMEB-1-230-2,5 151691 KMEB-1-230-5
2.5 5 2.5 5
Internet: meb-ld
MEB-LD-12-24DC MEB-LD-230AC
Internet: www.festo.com/catalogue/...
73
537515 160997
Internet: ahb
Internet: ibs
74
Internet: www.festo.com/catalogue/...
Part No.
Type
Part No.
Type
550079 550080 550081 550082 550083 550084 550085 550086 550087 550610 550611 550612 550613 550614 550615 550616 550617 550618
CPE14-PRS-y-2-NPT CPE14-PRS-y-3-NPT CPE14-PRS-y-4-NPT CPE14-PRS-y-5-NPT CPE14-PRS-y-6-NPT CPE14-PRS-y-7-NPT CPE14-PRS-y-8-NPT CPE14-PRS-y-9-NPT CPE14-PRS-y-10-NPT CPE14-3/2-PRS-y-2-NPT CPE14-3/2-PRS-y-3-NPT CPE14-3/2-PRS-y-4-NPT CPE14-3/2-PRS-y-5-NPT CPE14-3/2-PRS-y-6-NPT CPE14-3/2-PRS-y-7-NPT CPE14-3/2-PRS-y-8-NPT CPE14-3/2-PRS-y-9-NPT CPE14-3/2-PRS-y-10-NPT
550088 550089 550090 550091 550092 550093 550094 550095 550096 550619 550620 550621 550622 550623 550624 550625 550626 550627
CPE18-PRS-y-2-NPT CPE18-PRS-y-3-NPT CPE18-PRS-y-4-NPT CPE18-PRS-y-5-NPT CPE18-PRS-y-6-NPT CPE18-PRS-y-7-NPT CPE18-PRS-y-8-NPT CPE18-PRS-y-9-NPT CPE18-PRS-y-10-NPT CPE18-3/2-PRS-y-2-NPT CPE18-3/2-PRS-y-3-NPT CPE18-3/2-PRS-y-4-NPT CPE18-3/2-PRS-y-5-NPT CPE18-3/2-PRS-y-6-NPT CPE18-3/2-PRS-y-7-NPT CPE18-3/2-PRS-y-8-NPT CPE18-3/2-PRS-y-9-NPT CPE18-3/2-PRS-y-10-NPT
Internet: www.festo.com/catalogue/...
75