Beruflich Dokumente
Kultur Dokumente
Rotogage Assembly
For Container Inside Diameter
Part Number
Ellipsoidal Heads For Mobile or Stationary Containers A9091R A9092R A9093TS* A9094TS* A9095TS* For Stationary Containers Only A9093RS A9094RS A9095RS Side Mounted 30 - 45 46 - 61 62 - 79 80 - 99 100 - 147 End Mounted 30 - 75 76 - 108 109 - 147 -
Hemispherical Heads Side Mounted 30 - 45 46 - 61 62 - 79 80 - 99 100 - 147 End Mounted 30 - 45 46 - 61 62 - 79 80 - 99 100 - 147
* Supported Design NOTE: The dip tube must be cut to the required length( of container inside diameter minus 5).
Tubes for use with A9090 Series Roto Gauges Cut to length required.
Service Up to 48 Up to 72 Up to 96 Up to 120 Up to 144 Part Number A9091-M24.0 A9091-M36.0 A9091-M48.0 A9091-M60.0 A9091-M72.0
Rotogages
Rotogage Dials
Part Number A9091-18L A9091-18LX* A9091-18N Service LP-Gas LP-Gas NH3 Container Size All Sizes Over 1200 U.S. gallons All Sizes
UL
A9091-18LX
110
Rotogages
34" Rotogages for Small Stationary and Mobile LP-Gas Containers
Rotogages are designed to provide accurate determination of LP-Gas container contents. They may be end or side mounted in a standard NPT coupling on stationary or mobile containers. To guarantee accurate measurement, they should not be used on stationary containers that exceed 60 I.D. or on mobile containers, subject to vibration, with an I.D. of more than 24.
UL
2070 Series
NOTE: The dip tube must be cut to the required length ( of container inside diameter minus ), when mounted on center line of tank.
A2141A6
Rotogages
Length Of Valve
LP-Gas Liquid Flow Capacity at Various Differential Pressures (GPM)* 5 PSIG 10 PSIG 16 25 PSIG 25 50 PSIG 36
378
11
75 160 300
50 25 50
4916 558 14
5 16
21 52 250
30 75 350
47 120 550
67 170 750
1 2
111