Beruflich Dokumente
Kultur Dokumente
1. Requirements
Verify that the systems meet the minimum requirements listed below :
1.1 Hardware
Page 2
NEC Confidential
1.2 Software
Page 3
NEC Confidential
2. CID Installation
2.1 Task Flow The CID is installed according to the following procedure : - Start up CID installation program - Operate with CID installation wizard - Enter user information - Choose destination location - Select components - Select program folder - Finish the installation and restart the computer
Page 4
NEC Confidential
2.2 Procedure
2.2.1 Startup Installation Program 1. Turn on the PC and start up the OS. 2. Close all other application programs. 3. Insert the installation disk (CID CD-ROM) into the CD-ROM drive. The installation wizard automatically starts up. Then go to step 6, if the installation wizard does not starts, perform steps 4 and 5. 4. Click the Start button in the lower left of the window to show the menu, and select Run. A dialog box with an entry fields appears.
Page 5
NEC Confidential
5. Enter the path in which the CID setup program exists (see the following example), then click the OK button.
Page 6
NEC Confidential
6. The Setup dialog box shown in below appears, showing that all data required for CID installation is loaded automatically. After preparation is completed, the Welcome dialog box will appear to start the CID installation wizard.
Page 7
NEC Confidential
Page 8
NEC Confidential
2. In the User Information dialog box, enter users name, company name and the product serial number. Then click the Next button to proceed. The Choose Destination Location dialog box will be displayed. The loading program will record your information.
Page 9
NEC Confidential
3. The Choose Destination Location dialog boxbshows the destination folder to which the CID program is to be installed. The default directory is C:/CID.
Page 10
NEC Confidential
To change the default destination, click the Browse button to open the Choose Folder dialog box. Enter a desired destination location, then click the OK button to go back to the Choose Destination Location dialog box.
Confirm the destination location you have chosen, then click the Next button on the Choose Destination Location dialog box. The Select Components dialog box will be displayed.
Page 11
NEC Confidential
4. In the Select Components dialog box (Figure 3-10), select the be installed by clicking the check box on the left of each component tick). After selecting all components to be installed, then click The Select Program Folder dialog box will be displayed.
Page 12
NEC Confidential
5. In the Select Program Folder dialog box, select the program folder in which the shortcut icon of the CID application software should be created and saved. You can select the default folder (named CID) or another existing program folder. It is also possible to prepare a new program folder by entering a new folder name in the Program Folders field. After selecting (clicking) the program folder, click the Next button. The Setup Complete dialog box will be displayed.
Page 13
NEC Confidential
Click the Finish button to complete the CID installation. This step is the end of the procedure.
Page 14
PT. NEC Indonesia 2009 NEC Confidential
3. Setup CID
3.1 Serial Port Connection (f Interface) Procedure : 1. Connect the RJ-45 interface to f port of C-Node. 2. Connect the serial interface to serial port of PC. 3.2 Ethernet Communication (F Interface) Procedure : 1. Connect the RJ-45 interface to F port of C-Node. 2. Connect the other RJ-45 interface to Ethernet port of PC.
Page 15
NEC Confidential
Page 16
NEC Confidential
5. Select the language to be displayed in the CID by clicking a radio button English or Chinese. This step is the end of procedure. Go to the next procedure to set up communications.
Page 17
PT. NEC Indonesia 2009 NEC Confidential
Page 18
NEC Confidential
Page 19
NEC Confidential
6. Confirm the entered values, then click the Ok button. The NE Login dialog box will be displayed. This step is the end of the procedure. Go to the section 5. Login/Logout/Exit to login.
Page 20
PT. NEC Indonesia 2009 NEC Confidential
Page 21
NEC Confidential
4. Click the radio box IP Address. NOTE: When IP Address is selected, the text field for COM becomes disabled. 5. Enter the corresponding IP address to login. NOTE: IP address here mentioned here is for F interface of C-Node, and not for CID.
6. Confirm the entered values, then click the Ok button. The NE Login dialog box will be displayed. This step is the end of the procedure. Go to the section Login/Logout/Exit to login.
Page 22
PT. NEC Indonesia 2009 NEC Confidential
Page 23
NEC Confidential
4. Confirm the entered user ID and password, then select Local by clicking the radio button for local NE, or select Remote by clicking the radio button for remote NE. NOTE: When clicking Remote button, the loopback function from CID is rejected. 5. Click the OK button to login. During logging in operation, the following window will be displayed. This window will be disappeared after login is finished completely.
Page 24
NEC Confidential
6. After successful login, CID will collect the NE data and enter network manager interface after collecting completely. This step is the end of the procedure.
Page 25
NEC Confidential
5.2 Logout of NE
To logout the NE, perform the following procedure: Procedure 1. Confirm the modifications that user had done should be set or canceled. 2. Close the window under operation. 3. Logout the NE on CID. 4. Remove the cable between the NE and CID.
Page 26
NEC Confidential
Page 27
NEC Confidential