Beruflich Dokumente
Kultur Dokumente
CT-1PbF
Vishay High Power Products
Schottky Rectifier, 2 x 15 A
MBRB25..CTPbF MBR25..CT-1PbF
FEATURES
150 C TJ operation Available Center tap D2PAK and TO-262 packages RoHS* Low forward voltage drop COMPLIANT High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Guard ring for enhanced ruggedness and long term reliability Lead (Pb)-free (PbF suffix) Designed and qualified for Q101 level
DESCRIPTION
This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection.
D2PAK
TO-262
PRODUCT SUMMARY
IF(AV) VR IRM 2 x 15 A 35/45 V 40 mA at 125 C
VOLTAGE RATINGS
PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM MBRB2535CTPbF, MBR2535CT-1PbF 35 MBRB2545CTPbF, MBR2545CT-1PbF 45 UNITS V
Surge applied at rated load conditions halfwave, single phase, 60 Hz TJ = 25 C, IAS = 2 A, L = 8 mH Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical
Non-repetitive avalanche energy per leg Repetitive avalanche current per leg
EAS IAR
* Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94308 Revision: 14-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1
MBRB25..CTPbF/MBR25..CT-1PbF
Vishay High Power Products Schottky Rectifier, 2 x 15 A
ELECTRICAL SPECIFICATIONS
PARAMETER Maximum forward voltage drop Maximum instantaneous reverse current Threshold voltage Forward slope resistance Maximum junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 s, duty cycle < 2 % SYMBOL VFM (1) IRM (1) VF(TO) rt CT LS dV/dt 30 A TJ = 25 C TJ = 125 C TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 C Measured from top of terminal to mounting plane Rated VR TEST CONDITIONS TJ = 25 C TJ = 125 C Rated DC voltage VALUES 0.82 0.73 0.2 40 0.355 12.3 700 8.0 10 000 UNITS V
mA V m pF nH V/s
Mounting torque
Marking device
MBRB2545CT MBR2545CT-1
www.vishay.com 2
MBRB25..CTPbF/MBR25..CT-1PbF
Schottky Rectifier, 2 x 15 A Vishay High Power Products
100
100
10 1 0.1 0.01
10
TJ = 150 C TJ = 125 C TJ = 25 C
0.001 0.0001
TJ = 25 C
1 0.2
0.4
0.6
0.8
1.0
1.2
1.4
10
15
20
25
30
35
40
45
1000
TJ = 25 C
100
10
20
30
40
50
10
1
PDM t1
t2
0.0001
www.vishay.com 3
MBRB25..CTPbF/MBR25..CT-1PbF
Vishay High Power Products Schottky Rectifier, 2 x 15 A
150
14
140
DC
130
12 10 8 6 4 2 0
RMS limit
120
DC
110
12
16
20
24
10
15
20
25
1000
At any rated load condition and with rated VRRM applied following surge
100
10
100
1000
10 000
tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR
www.vishay.com 4
MBRB25..CTPbF/MBR25..CT-1PbF
Schottky Rectifier, 2 x 15 A Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
MBR
1 1 2 3 4 5 6 7
-
B
2
25
3
45
4
CT
5
-1
6
TRL PbF
7 8
Essential part number B = D2PAK 6 None None = TO-262 6 = -1 Current rating (25 = 25 A) Voltage ratings CT = Essential part number None = D2PAK -1 = TO-262 2 = B 2 None
35 = 35 V 45 = 45 V
None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only)
None = Standard production PbF = Lead (Pb)-free (for TO-262 and D2PAK tube) P = Lead (Pb)-free (for D2PAK TRR and TRL)
LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information http://www.vishay.com/doc?95014 http://www.vishay.com/doc?95008 http://www.vishay.com/doc?95032
www.vishay.com 5
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
www.vishay.com 1