Beruflich Dokumente
Kultur Dokumente
http://photochemistryportal.net/home/index.php/2009/09/01/ruthenium-p...
Skip to content Home About Applications Principles Experimental Copyright Links The Photochemistry Portal Principles, Applications and Experimentation in Modern Photochemistry September 1, 2009 1
Subscribe
1 of 9
2/5/2013 10:59 AM
http://photochemistryportal.net/home/index.php/2009/09/01/ruthenium-p...
of the metals molecular orbitals, three other transitions are available a d-d transition, where an electron is excited from a metal orbital to an unoccupied metal orbital (this is usually referred to as a metal centred (MC) transition as well as transitions between the metal and the ligand. These can be either an electron excited from the ligand to the metal, called Ligand to Metal Charge Transfer (LMCT) or from the metal to the ligand (MLCT). Because of the energy differences between the various types of transitions, ligand field transitions are usually in the near-UV region (analogous to where we would expect organic molecules to absorb light), charge transfer transitions are in the visible region. The resulting emission from charge-transfer states is often highly coloured.
Light absorption in d-block (octahedral) complexes resulting in from left: metal centred transition (MC), ligand to metal charge transfer (LMCT), metal to ligand charge transfer (MLCT) and ligand-ligand transition (L-L) In order to discuss these transitions in context, we will focus on the, that is, the, inorganic photochemistry complex: Ru(II)(bpy)32+.
2 of 9
2/5/2013 10:59 AM
http://photochemistryportal.net/home/index.php/2009/09/01/ruthenium-p...
MLCT is efficient (heavy atom effect) and so ruthenium complexs photochemistry generally happens from here. [Remember intersystem crossing is effectively an electron flip, from a situation where electrons are paired to one where they are unpaired.]
Jablonski diagram for ruthenium polypyridyl complexes. Solid lines and dashed lines are radiative and non-radiative processes respectively.
Absorption (top, source unknown) and emission (bottom, author's results) spectra of Ru(bpy)3 (2+) complex in water The absorption and emission data are shown. Ruthenium absorbs at 450 nm (2.8 eV) and emits strongly at ~620 nm (~2.0 eV) in water. This emission is caused by radiative process from the 3MLCT state to the ground state. Emission lifetimes are approximately 200 ns in water in aerated solution and 600 ns in deaerated water. The oxygen in water is a very efficient quencher, and quenches emission with a rate of ~ 109 M-1 s-1. It is possible to map out the various deactivation processes of the excited state to investigate its kinetics:
3 of 9
2/5/2013 10:59 AM
http://photochemistryportal.net/home/index.php/2009/09/01/ruthenium-p...
Deactivation processes of an excited state M* in the presence of a quencher (oxygen) The quantum yield of emission is therefore affected by how efficient the rate of emission is compared to the rates of deactivation and quenching. This is quantified by the Stern-Volmer relationship (oxygen quenches according to the dynamic quenching model) as discussed in the Quenching section, according to the equation below:
Stern Volmer Equation for Quenching with oxygen as quencher The rate constants, in particular the rate constant for deactivation, are dependent on how close the ground and excited states are. The excited state of this complex is a charge-transfer state (charge has moved from one region of the molecule to another), and therefore is very sensitive to solvent polarity it will be stabilised in more polar solvents. Therefore, changing solvent polarity will affect the energy of the emitting state. It is found that on changing the solvent from water to acetonitrile, the emission lifetime increases from 635 ns to 870 ns, and the quantum yield of emission increases by 50% from 0.o4 to 0.o6. The emission maximum increases in energy from 627 nm to 615 nm. These results can be explained as follows: on decreasing polarity of the solvent, the emitting state is destabilised by about 12 nm. This increase in energy difference between ground and excited state means that there is poorer overlap of the vibrational levels of the ground and excited state, so the deactivation process is
4 of 9
2/5/2013 10:59 AM
http://photochemistryportal.net/home/index.php/2009/09/01/ruthenium-p...
not as efficient. Therefore the deactivation rate constant term is lower in the expression for the emission quantum yield in the presence of quencher, above, indicating a larger emission quantum yield. All of this is based on the assumption that the radiative rate constant remains unchanged, which is found to be true in practice. This observation is generally summarised as the Energy Gap Law the larger the gap between ground and excited state, the less efficient deactivation processes are. 2.2 Nature of the Excited State Absorption and emission spectra give initial information on the excited state, and are the photochemists initial tools to probe the excited state chemistry of molecules. To delve further, flash photolysis/transient spectroscopy give more detailed information. Flash photolysis, as mentioned elsewhere on this site, allows us to study the excited state by obtaining its lifetime and absorption spectrum. An experimental set-up is outlined below (more details onthe general details of flash photolysis in the Experimental article on Flash Photolysis). Excitation using, for example a Nd:YAG laser at 355 nm, generates the excited state which quickly equilibrates to the 3MLCT state. At this stage, a Xe or Hg/Xe obtains an absorption spectrum of the excited state. This was traditionally acquired point by point (i.e. measuring the change in absorption at 400, then 410, then 420 nm, etc) but iCCD (intensified charge coupled device) detectors are now the norm these acquire information across a broad spectral range (~600 nm) at once. As well as providing structural information on the nature of the excited state by generating its absorption spectrum, flash photolysis also allows for the lifetime of this state to be measured, by acquiring a spectrum at intervals after the laser flash, therefore monitoring the decay of the excited state.
Schematic of Transient Absorption Spectroscopy Experiment: Laser excites sample and change in absorption is monitored by a xenon lamp. The simulated transient spectrum (top right) is the difference in absorption after laser flash, showing negative (disapearance of ground state) and positive (formation of transients) absorbances. The absorption spectrum is shown on the bottom for comparison. Inset shows a kinetic trace of any of the transient peaks from which lifetime information can be gleaned. The transient spectrum is shown with the accompanying ground state absorption spectrum. In the transient spectrum, it can be seen that some peaks have negative changes in absorbance whereas others have positive changes. The negative changes in absorbance (bleaching) occur where the molecule shows absorbance
5 of 9
2/5/2013 10:59 AM
http://photochemistryportal.net/home/index.php/2009/09/01/ruthenium-p...
bands in the ground state. Hence, with a transient spectrum, the lash flash results in the formation of the excited state, and the xenon lamp records the loss of ground state chromophores any absorbance that was present because of these chromophores is now registered as negative changes in absorbance in the transient spectrum. On formation of excited/transient state, new chromophores are present, which are monitored by the xenon lamp, and hence appear as positive changes in absorption (remember ground and excited states are chemically different species). To generate a true transient spectrum, the differences in absorption is subtracted from the absorption spectrum, although this is rarely necessary. The decay curve, in the inset is the rate of decay of one of the peaks e.g. the transient peak at 390 nm. Fitting this curve to an exponential function allows for the rate constant (and hence lifetime) of the transient state to be easily determined. For example, if the decay was found to be mono-exponential, the curve of intensity (I) versus time (t) would be fitted to the expressionand allow for calculation of k.
The above experiment discusses results from a nanosecond experiment, but if we were to push faster, into the picosecond and femtosecond domain, the processes of intersystem crossing and relaxation in the triplet state would be observed. These kind of experiments are how information such as charge injection rates in dye-sensitized solar cells can be determined. The extent of positive absorbances in transient spectroscopy provide information on the nature of the transient species or excited state. Like conventional UV/vis spectroscopy, broad featureless bands very often dont provide much direct information. However, considering the various types of transitions available, why is the excited state assigned as a MLCT state? This state, as indicated above, results in an extra electron residing on the bipyridyl (bpy) ligand, after an electron was transferred from the metal to it. Therefore, the transient spectrum should show characteristics of this bpy radical (called bpy dot minus). How can this be done? Well with the assistance of our electrochemical friends, we can electrochemically generate the bpy radical, and obtain its UV/vis spectrum (this technique is called spectroelectrochemistry). If it has characteristics similar to those in the transient spectrum (which in this case it does, the band at 368 nm), we can conclude that they must be attributed to the same chromophore.
3. Conclusion
In this first of two articles, we have looked at basic photophysical properties of a ruthenium complex and examined how absorption, emission and transient spectroscopic studies provide information on their excited state. In the second article, we will look at how these properties are used in a variety of applications.
6 of 9
2/5/2013 10:59 AM
http://photochemistryportal.net/home/index.php/2009/09/01/ruthenium-p...
Read more from Principles, Ruthenium Photochemistry Applications, charge transfer, d-orbitals, DSSC, Dye-sensitized solar cells, energy gap law, inorganic photochemistry, Jablonski diagram, photoinduced electron transfer, ruthenium, sensors, solvent effects 1 Comment Post a comment
1. Sibrina Collins Apr 17 2011 This is a great website. Are you planning to develop a website on the fundamentals of osmium polpyridyl photochemistry? I know Os (II) and Ru(II) polpyridyl complexes exhibit similar properties, so this could be extended to Os. Share your thoughts, post a comment. Name Email Website (required) (required)
Comment Note: HTML is allowed. Your email address will never be published.
7 of 9
2/5/2013 10:59 AM
http://photochemistryportal.net/home/index.php/2009/09/01/ruthenium-p...
Subscribe to comments
Recent Posts
Photodynamic Therapy: An overview Avatar and Photochemistry: Chemiluminescence Beautiful Photochemistry Quenching Mechanisms Our Energy Future: Lecture by Prof Tom Meyer Metal Oxide Photocatalysis Origins of Flash Photolysis: George Porter Ruthenium polypyridyl photochemistry Light Absorption and Fate of Excited State Luminescent PET Sensors
Search
Tags
absorption
d-orbitals de Silva
Applications
DSSC Dye-sensitized solar cells energy gap law excited state Experimental flash photolysis Gratzel historical developments inorganic photochemistry
photoinduced electron transfer popular science Porter radiative decay ruthenium semiconductor sensors solvent effects titanium dioxide transient absorption spectroscopy
8 of 9
2/5/2013 10:59 AM
http://photochemistryportal.net/home/index.php/2009/09/01/ruthenium-p...
History of Photochemistry Light Absorption PET Sensors Photodynamic therapy Principles Public Science Quenching Resources Ruthenium Photochemistry Semi-conductor photocatalysis
About
This site is designed to supplement a module in Photochemistry taught to my students, but is open access so that all users can view contribute and comment on the material here. The philosophy behind the blog is to impart the excitement of the subject as it stands, and outlining where future photochemists have a role to play. Some theoretical material is also presented, again in contextualised manner when possible. There are three main sections: Principles, Applications, and Experimental Details.
Pages
About Applications Principles Experimental Copyright Links
Search
Traction Theme by The Theme Foundry Copyright 2013 Michael Seery. All rights reserved.
9 of 9
2/5/2013 10:59 AM