Beruflich Dokumente
Kultur Dokumente
CK Jet Diffuser
I Description
ASLI CK jet diffusers are made out of a fixed outer frame and adjustable concentric rings, which specially designed for high volume and long throw applications. The concentric rings can be adjusted 45 upward and downward or leftward and rightward depending on the installation position to control the direction of airflow. CK jet diffusers are suitable to be installed on exposed ductwork or surface mounted in stadium, factory, theatre and etc.
I Materials
Outer frame: CK-A, 1.0mm thickness aluminum sheet roll formed. Concentric rings: CK-A, 1.0mm thickness aluminum sheet roll formed.
Economical. Long throw capability. High air flow capability. Suitable for exposed ductwork or surface mounted. Suitable for ceiling or wall installation. Air flow direction is adjustable up to 45 upward and downward or leftward and rightward.
I CK Construction Illustrations
Top View
Section View
All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown. CK page 1 of 4
JET DIFFUSERS
CK Jet Diffuser
I CK Control of Air Flow Direction
Pointing downwards
Pointing upwards
The direction of the airflow has to be predetermined before installation. If the airflow direction is upwards or downwards, the diffuser has to be installed with circular support shaft placing horizontally. If the airflow direction is leftward or rightward, the diffuser has to be installed with circular support shaft placing vertically.
All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown. CK page 2 of 4
JET DIFFUSERS
CK Jet Diffuser
I CK Air Flow Performance Data
Neck Size (mm) 150 Neck Area Neck Vel.(m/s) (m2) Tot. Press (mmAq) CMH 0.0177 Throw (m) NC CMH 0.0314 Throw (m) NC CMH 0.0491 Throw (m) NC CMH 0.0707 Throw (m) NC CMH 0.0962 Throw (m) NC CMH 0.1257 Throw (m) NC 2 0.7 127 2.6 226 3.8 353 4.6 509 5.6 693 6.5 905 7.4 3 1.5 191 4 120 339 5.6 20 530 7 763 8.4 1039 9.6 1357 10.8 4 1.7 254 5.5 24 452 7.4 24 707 9.5 22 1018 11.2 23 1385 13 24 1810 15.2 25 5 2.5 318 6.8 30 565 9.2 30 884 11.6 27 1272 14 27 1732 16.3 28 2262 18.8 28 6 3.1 382 8.2 37 679 11 37 1060 13.8 32 1527 16.8 32 2078 19.5 34 2714 22.4 35 7 4.7 445 9.6 43 792 13 43 1237 16.2 36 1781 19.5 36 2425 22.6 37 3167 26.4 37 8 6.5 509 11 47 905 14.7 47 1414 18.5 40 2036 22.2 40 2771 25.6 41 3619 29.4 42 10 8.4 636 15.2 50 1131 20.5 50 1767 25.4 44 2545 31 44 3464 35.5 45 4524 33.1 46
200
250
300
350
400
Throw is based on terminal velocity of 0.25m/s Throw is based on isothermal condition NC value is based on room absorption of 10dB, re 10-12 watts Dash (-) in space indicates NC value less than 20 The performance data is tested in zero degree deflection in axial installation (wall installation)
I CK Installation
Ductwork mounted
All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown. CK page 3 of 4
JET DIFFUSERS
CK Jet Diffuser
Radial blade damper (C1) can be installed at the rear of CK to adjust the air flow rate. CK could be connected to a flexible duct. The opening of the C1 can be adjusted by a screwdriver from the face of the CK.
C1 CK
Screwdriver
CK could be mounted on a panel and supplied as a unit. The CK panel could be installed on the wall or ceiling.
Two CK panel
Three CK panel
Four CK panel
I CK Suggested Specification
CK-A jet diffuser shall be suitable for throw of 10 meters distance with optimum acoustic properties. The outer frame and concentric rings shall be made of 1.0mm thickness aluminum sheet roll formed. The concentric rings shall be adjustable with 45 deflection upward or downward without using any tools. The concentric rings shall be connected to the outer frame with two circular shafts in one axis. The concentric rings shall be connected to each other with two circular shafts in an axis, which is perpendicular to the shafts connected to the outer frame. The concentric rings shall have an aerodynamic profile to diffuse the air. The outer frame shall be detachable from the concentric rings with simple tools. The diffuser shall be epoxy coated and furnished to architectural requirement.
I CK Order Code
Model CK
Example: CK-A-200mm-C1
Accessories C1
All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown. CK page 4 of 4