Beruflich Dokumente
Kultur Dokumente
com
Document: Datasheet
Date: 13-Nov-11
Model #: 1118
Features
Supports 89 series & serial EEPROM devices Powered from USB port (No external power required) Fast speed writing (8kb flash file in 10 seconds) LED indicating active process Auto Identify connected programmer Error checking and verification in-built Lock of programs in chip supported to prevent program copying 40 pin ZIF socket for easy insertion & removal Auto Erase/Lock/Verify Informative window and access to latest programmed file Simple and Easy to use
Specification
Parameter Communication Power Cable Dimension Details USB 2.0 compliant +5V from USB Cable USB A to B type 10cm x 6.4 cm
Devices Supported
Atmel AT89C51 AT89C52 AT89S51 AT89S52 AT89S53 AT89S8252 AT89C1051 AT89C2051 AT89C4051 Winbond W78E51 W78E52 SST SST89C54 SST89C58 SST89C59 SST89E54RD SST89E58RD SST89E554RC Serial EEPROM AT24C01 AT24C02 AT24C04 AT24C08 AT24C16 AT24C32 AT24C64 AT24C164 Serial EEPROM AT93C46 AT93C56 AT93C66
Sunrom Technologies
Visit us at www.sunrom.com
Plug in one end of USB Cable to PCs USB Port and another end to Programmer. When connecting the 1118 hardware to USB the LED on programmer will blink once and become off. It is normal indication of everything is ok.
Step #2 Install USB Driver
Insert the CDROM provided with programmer. There will be a folder called USB Driver. It contains a file README.TXT with instructions related to install of USB Driver as per your operating system.
Install PC software by running its setup 1118_setup.exe from CDROM and follow onscreen instructions. After setup is done, it will install icon on desktop.
Run 1118 software from desktop or start menu. Software should connect and show ONLINE icon green color at bottom. Your programmer is ready to use. Refer to pages below to follow process.
If you get failed to connect in software, refer to next page. Just to check, Now you should be able to see a Virtual COM port in your Device manager as shown here. It will be called USB Communications Port(COMx).
To open device manager right click My Computer and click properties. In this window see Hardware > Device Manager > Ports. IMPORTANT NOTE: The COM port detected should be between COM1 to COM9 else software will fail to connect to hardware. Next page has instructions on how to change COM port.
Sunrom Technologies
Visit us at www.sunrom.com
Sunrom Technologies
Visit us at www.sunrom.com
DIP20
DIP40
After you put device in ZIF socket, then pull handle down. This will bring tension on all pins of device and bring contact to all pins. When programmer is not in use, the Handle should be left vertical and IC removed from socket else the life of socket will be reduced.
Sunrom Technologies
Visit us at www.sunrom.com
Programming Method
Step #1: Select Device
Select Device by clicking Device button to bring device selection dialog. After selecting inserted device click OK. To select recently used devices you can click on down arrow & select.
Step #2: Load file
PC software takes HEX or BIN file for programming. Load > Select HEX file & click OK. To select recently used files you can click on down arrow & select. You will see following dialog when you load a HEX extension file. You can keep all setting as default and click OK to select this file.
Sunrom Technologies
Visit us at www.sunrom.com
Related Links
http://www.keil.com http://sdcc.sourceforge.net/ http://en.wikipedia.org/wiki/Intel_HEX Keil: Commercial C & assembly compiler for 8051 devices SDCC: Freeware C compiler for 8051 devices Intel Hex file format information
Sunrom Technologies
Visit us at www.sunrom.com