Sie sind auf Seite 1von 17

Hernn J.

Larrea

NetApp Data Ontap Simulator Cookbook


HOW TO BUILD YOUR OWN VIRTUAL, ALL FUNCTIONAL STORAGE SIMULATOR, WITH UBUNTU OS AND ISCSI FEATURES.

Version 1.1

NetApp Data Ontap Simulator Cookbook

CONTENT
Disclaimer ..................................................................................................................................................... 3 Version History ............................................................................................................................................. 3 Document conventions ................................................................................................................................ 3 Introduction.................................................................................................................................................. 4 Concepts ....................................................................................................................................................... 4 Ingredients.................................................................................................................................................... 4 Vmware Server 2 ...................................................................................................................................... 4 Ubuntu Server 10.04 ................................................................................................................................ 5 Ubuntu aDditional packages .................................................................................................................... 5 Data Ontap simulator 7.3.4 ...................................................................................................................... 5 Netapp licenses ........................................................................................................................................ 5 Model ........................................................................................................................................................... 5 Recipe ........................................................................................................................................................... 6 Installing licenses ...................................................................................................................................... 8 provisioning a lun through iscsi ................................................................................................................ 8 Apendix A: Installing A clustered simulator ................................................................................................ 12 About the author ........................................................................................................................................ 17

Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

DISCLAIMER
This document is protected by Creative Commons attribution, non commercial, noderivs 3.0 license, this means:

Attribution: You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work). Noncommercial: You may not use this work for commercial purposes. No Derivative Works: You may not alter, transform, or build upon this work.

Network Appliance Inc. has not participated on the development of this paper.

VERSION HISTORY
Document updates: 1.0 1.1 o o o o o Document issued first time. Added Appendix A to describe clustered simulator installation. Added Disclaimer section. Modified and renamed About Me section to About the author. Added Document Conventions section.

DOCUMENT CONVENTIONS
Special font types will be used to differentiate words with different meanings and usage: italic bold link Special comments. Comments attached to an output of the installation script. Links pointing to web pages or email addresses.

Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

INTRODUCTION
I have created this document as it has been a great experience to me working with the Data Ontap simulator. It is very real, building the simulator as it is explained on this guide, will let you practice exporting LUN via iSCSI, creating shares, working with snapshots, it is almost an all functional virtualized storage. If you want to learn some storage fundamentals or NetApp fundamentals, gain some practice on the Data OnTap CLI or FilerView, this will help you to set up a very real, working, and all functional lab. So, lets cook.

CONCEPTS
Some stuff you need to get familiar to understand this guide if you have never worked with storage solutions. If you are already familiar with Storage concepts or with NetApp technologies dont bother reading this section. Storage fundamentals, it would be great first you to have some idea of what a storage box is, different vendors, such as EMC, Hitachi and IBM, NetApp is just one more of them. And what is a SAN, and SAN Connectivity, for real storage environments this is the cornerstone, it is a physical layer composed by FC cables, FC switches and directors, even we are not going to virtualize a SAN (since it is not possible), and we are going to use iSCSI instead, it would be great you to read some about other Storage Vendors and most of all about SAN and SAN Connectivity, so you can get an idea the way it is in the real world, and get a better understanding on the gaps between the real world and this simulator. Filer, is the way NetApp calls their storage boxes, doesnt care if they are used only NAS (CIFS and NFS) or only for LUN Mapping, or both, they call their boxes, filers. FilerView, is the admin portal for the storage, an alternative for the CLI. Aggregate, Volume, qtree, LUN, Snapshots, this is what you can do with the disks inside your storage, how to arrange them to reach a technical objective. For example, you arrange your physical disks into Aggregates, but the aggregates are composed by raid groups and these ones by physical disks, understand the loop? Of course, an Aggregate can have more than one raid group. Once your aggregate is created, you can create volumes inside of it, and inside these volumes you can create shares, qtrees, luns or snapshots. But as this is not a NetApp administration guide, Im going to stop here talking about this, and just say these are key concepts to understand in order to be able to operate you NetApp simulated Filer, if you want to read more you can do it at NetApps NOW site, http://now.netapp.com. Finally, Ive mentioned this couple of times at this point, synthetic hardware, this nothing else but the hardware you add to your VM.

INGREDIENTS
What you will need for your recipe and where to get it.

VMWARE SERVER 2
4 Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

Virtualization software, this is my choice, you can change it for any other that supports a Linux operating system, mounting ISO images in synthetic CD hardware of your VM and more than one Ethernet synthetic interface in your VM. VMWare Server 2 it is free, and you can get it from: http://downloads.vmware.com/d/info/datacenter_downloads/vmware_server/2_0 just register and download.

UBUNTU SERVER 10.04


This was also my choice, even it is documented by NetApp that is fully supported by their simulator, I guess you can run another Linux flavor you like. It is also free, at the moment this document was written 10.04 was the latest version available. Download from: http://www.ubuntu.com/server/getubuntu/download no need registering, just select 32 bits Server ISO and download it.

UBUNTU ADDITIONAL PACKAGES


Some packages you will need, as I choose Ubuntu as the base system I used apt in order to get the packages, but if you choose another Linux flavor you might have to download the sources or precompiled binaries and make them on you system. open-iscsi (necessary for mounting iSCSI exported LUNs from your virtualized storage) lsscsi (just to check when an iSCSI LUN has been mapped to the system) expect (necessary only for running the simulator in background) vim (just because I like it more than vim-tiny)

For Ubuntu choosers, all of them available from the Lucid repository.

DATA ONTAP SIMULATOR 7.3.4


The master piece, the simulator itself, you can get it from http://now.netapp.com (for this you must be a NetApps member, partner or customer, as the company I work for is, Ive been able to download it, anyway there is a registration form available on the site, I havent tried if registering on through that form makes also the download available). You will get an ISO image file from where you will get all you need for your simulator. At the time this document was written, Data Ontap 8 version had already been released but as it is for 64 bits I preferred to keep working on 7.3.4. Also this new version seems is does not need to run on top a VM, of course the ISO for this version is much bigger than for 7.3.4.

NETAPP LICENSES
Data Ontap simulator includes all the licenses or the products and features available in your filer, such as Flex Clone, Snapmirror, Syncmirror, iSCSI, CIFs, NFS, and so on. You can find them inside the ISO image, under ./docs/license_keys.htm

MODEL
First of all, lets take a quick view of what we are going to build and its layers (on the following diagram Im going to include only the relevant layers).

Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

lun snaps vol0 Volume (vol1) aggr0 Aggregate (aggr1) ns0 Data Ontap Ubuntu VM eth0

iSCSI

eth1

Data Ontap root Aggregate and Volume


Starting from bottom to top, our VM, a common VM configured to run a Linux OS with 2 virtual NICs. We will need 2 because by definition, the Data Ontap simulator, binds its network interface/s to physical interfaces (actually this is a synthetic NIC but the simulator doesnt know that). And once the ns0 interface from the storage is attached to the physical one, the server where the simulator is running it wont be able to access the storage through that interface, and as we are going to map luns though iSCSI a second interface will help us to do so. The VM NICs can be bridged, NAT, or host only connections to your hosting machine, thats your call, and also based on what your Virtualization software allows you. As we are going to download some packages with apt, I recommend you to set at least one of them as bridged or NAT. Moving forward, the OS, Ubuntu is this case, we will install Ubuntu Server with the Virtual Machine mode, so a minimal system is installed, no graphical interface, no unneeded packages, no wasted space. Finally the Data Ontap simulator and the open-iSCSI package for LUN Mappings. We are talking about this much in depth in the following sections.

RECIPE
Here you will find the steps for the implementation of the VM and the Simulator, on some parts Ill show a high level description on what should be done, such as in the OS installation process, the guide is meant to let you setup your lab to learn some storage and NetApp not Linux, internet is plenty of documents to answer your questions and Ill be pleased to answer any consult. Also the storage once installed will be simple configured, no clustering, no virtual interfaces, you can play with that if you want, but Im not going to show that here. 1. 2. 3. 4. 5. Create your VM with 2 NICs, 1 configured as NAT or bridged at least. I recommend you to use between 256 and 512 MB for RAM and 8 GB for disks will be ok. Install Ubuntu server as minimal virtual machine mode, during the first screen, ater selecting language, press F4 and select the installation mode. Follow the installation steps for the OS. Take note of which network interface will you select as primary when the installation prompts. When prompted about server functions to install, select openSSH and Samba, for remote administration and filesharing with your desktop, these functions are not required pieces for the puzzle but might make your life easy working with the simulator.

Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

6. 7. 8. 9. 10.

11. 12.

13. 14. 15. 16. 17. 18. 19. 20. 21. 22.

23. 24. 25. 26.

27.

28. 29. 30. 31. 32.

Once Ubuntu is installed I recommend you to take a snapshot of the VM, just in case something goes wrong you do not have to run the installation all over again. If installed openSSH configure it to accept connections over any of the network interfaces. Edit /etc/network/interfaces to include your second interface. And if you want fix IPs for both interfaces. Restart networking daemon. Install the following packages: a. vim ; Run: apt-get install vim b. open-iscsi ; Run: apt-get install open-iscsi c. expect ; Run: apt-get install expect d. lsscsi ; Run: apt-get install lsscsi Configure iSCSI daemon to start automatically. Edit /etc/iscsi/iscsid.conf under Startup Settings, change the startup mode to automatic. Mount the Data Ontap simulator CD and run the installation script ./setup.sh. Following steps (13 to 26 ) show the options given during the setup.sh script execution. Text between brackets shows the default option, if you press return without entering any character this will be the configured option. For these steps, comments will be in bold to make difference between installation prompts and comments. Where to install to? [/sim]: Would you like to install as a cluster? [no]: Ill write another document regard clustering options. Would you like full HTML/PDF FilerView documentation to be installed [yes]: n Continue with installation? [no]: y Your simulator has 2 disk(s). How many more would you like to add? [0]: 26 What disk size would you like to use? [a]: a Choose whether you feel comfortable with. Disk adapter to put disks on? [0]: Use DHCP on first boot? [yes]: Ask for floppy boot? [no]: Which network interface should the simulator use? [default]: eth1 Make sure to check an interface different from the one you selected as default during the installation. Also to get this working properly so you can access, the internet, the local network and the simulator from the VM ensure the eth0 is first in the routing table (Run command: route) if not, just delete the routes for eth0 and add them again. How much memory would you like the simulator to use? [512]: 256 Set the amount of memory you feel comfortable with inside the parameters given. Create a new log for each session? [no]: Overwrite the single log each time? [yes]: Run /sim/runsim.sh to start the simulator. The first time you run the simulator it will ask you to set settings relevant to your virtual storage functionality, anytime you want to run this configuration again, you can run /sim/steup.sh. Run /sim/runsim.sh to start the simulator and the first configuration. For next steps (28 to 48) Im going to show the prompts by the setup script, any comments will be made in bold to avoid confusion between scripts prompts and comments. Please enter the new hostname []: ontap01 Just choose a name that likes you. Do you want to enable IPv6? [n]: Do you want to configure virtual network interfaces? [n]: Please enter the IP address for Network Interface ns0 [192.168.0.106]: Please enter the netmask for Network Interface ns0 [255.255.255.0]: 7 Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43.

44. 45.

46. 47. 48. 49. 50.

Please enter media type for ns0 {100tx-fd, auto} [auto]: Please enter the IP address for Network Interface ns1 []: Would you like to continue setup through the web interface? [n]: Please enter the name or IP address of the IPv4 default gateway [192.168.0.1]: Please enter the name or IP address of the administration host: 192.168.0.101 Please enter timezone [GMT]: Where is the filer located? []: Argentina What language will be used for multi-protocol files (Type ? for list)?:en_US Do you want to run DNS resolver? [n]: Do you want to run NIS client? [n]: Do you want to configure the Shelf Alternate Control Path Management interface for SAS shelves [n]: New password: Retype new password: Do you want to make the system visible via WINS? [n]: A filer can be configured for multiprotocol access (...) Selection (1-2)? [1]: 1 Enter the password for the root user []: Retype the password: The default name for this CIFS server is 'ONTAP01'. Would you like to change this name? [n]: Data ONTAP CIFS services support four styles of user authentication. Selection (1-4)? [1]: 4 What is the name of the Workgroup? [WORKGROUP]: At this point you should be being requested to enter the root password. Once loged in as root you will be taken to the Data Ontap prompt your storage name> in my case Ontap01>. Now you can start playing with your storage!

INSTALLING LICENSES
For most things we want to do here, we need to install some licenses, from your linux machine mount the CD image and browse to ./doc and open the file named license_keys.htm. To install the licenses it is really simple, we can do it through CLI or via FilerView. For our next objective we will need to install iSCSI license, so go to the file, grab the code and run the following command in the Data Ontap CLI: license add <code> Repeat the procedure for every product or feature you want to enable. To get a summary on the licenses installed just run the license command.

PROVISIONING A LUN THROUGH ISCSI


At this point your simulator should be up and running and you should have all disks as spares, to accomplish this objective what we need to now is: Create a new Aggregate. Create a volume inside the Aggregate. Create a LUN inside the volume. Create an Initiator group and add our iSCSI address. Map the lun and the initiator group. Log in from the OS to the storage over iSCSI and discover the LUN. Make a FS inside the new disk and mount it. 8 Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

Keep playing with your storage!

Im going to describe how to do this through the CLI, but you might want to do it through the FilerView all options are available from any of these interfaces. So, as we already cooked, lets decorate the plate Creating a new aggregate First of all, as I mentioned in the concepts section, we know disks are arranged into raid groups, and aggregates are composed by raid groups. First of all, lets check the status of our disks. Ontap01>sysconfig r You will get an output with the details on the physical disks and how are they arranged in through the different aggregates. (If no aggregate was created only aggr0, the root aggregate will be shown an all the other disks will be shown as spares). Ontap01>aggr create aggr_tst -r 8 -t raid4 16@16m This command will create an aggregate called aggr_tst with a raid group size of 8 with only 1 disk of parity per raid group (raid 4) and will include 16 disks of 16 MBs each. (So it will create 2 raid groups with 8 disks each, but only 7 will be usable since each raid group has 1 disk or parity). Creating a volume inside the aggregate Now the aggregate is created, check the space on it: ontap01> df -h -A aggr_tst Aggregate total used avail capacity aggr_tst 191MB 80KB 191MB 0% aggr_tst/.snapshot 10MB 0MB 10MB 0% There are 10MB (5%) reserved for aggregate snapshots as we wont take any snapshot from the aggregate lets claim that space: ontap01> snap reserve -A aggr_tst 0 ontap01> df -h -A aggr_tst Aggregate total used avail capacity aggr_tst 201MB 80KB 201MB 0% aggr_tst/.snapshot 0TB 0TB 0TB ---% Now weve got all the space for us, lets create a 100MB volume inside this aggregate: ontap01> vol create vol_tst aggr_tst 100m This command will create a 100MB volume named vol_tst inside the aggregate aggr_tst. So, the volume is created, lets check the space on it: ontap01> df -h vol_tst Filesystem total used avail capacity Mounted on /vol/vol_tst/ 80MB 88KB 79MB 0% /vol/vol_tst/ /vol/vol_tst/.snapshot 20MB 0MB 20MB 0% /vol/vol_tst/.snapshot

Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

Again we see space reserved for snapshots, we might want to take snapshots of this volume, so lets keep it, and create a LUN inside this volume. Creating the LUN Just run the following command: ontap01> lun create -s 50m -t linux /vol/vol_tst/lun_tst ontap01> lun show /vol/vol_tst/lun_tst 50m (52428800) (r/w, online) And the LUN is created. The lun create command includes the size of the lun (of course it cant be bigger than the volume where it is located), the type o OS which will access that LUN and finally the path where you want to store it inside your filer. Creating the iSCSI initiator group First of all, on the storage side, check the iSCSI service is running: ontap01> iscsi status iSCSI service is running In order to create the initiator group, you first must know the initiators iSCSI node name, go to the Linux machine and read the content of /etc/iscsi/initiatorname.iscsi file: InitiatorName=iqn.1993-08.org.debian:01:58cad98ae9c6 Then, create the initiator group with the igroup command: ontap01> igroup create -i -t linux Initiators_tst ontap01> igroup show Initiators_tst (iSCSI) (ostype: linux): About the create parameter or igoup command, you must specify it is an iScsi initiator goup type (-i option) and the the host type and the group name. As you can see, it has been created but its empty, lets add the node name of the server. ontap01> igroup add Initiators_tst iqn.1993-08.org.debian:01:58cad98ae9c6 ontap01> igroup show Initiators_tst (iSCSI) (ostype: linux): iqn.1993-08.org.debian:01:58cad98ae9c6 (not logged in) Now, we need to map the LUN to the initiator group. Mapping the LUN to the initiator group Run the following command: ontap01> lun map /vol/vol_tst/lun_tst Initiators_tst 1 and the mapping is done. You indicate which LUN to which group and which id will be set to the LUN being mapped. Discovering the LUN on the servers side

10

Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

At this point our storage is presenting the LUN via iSCSI to the server, now the server must run the necessary steps in order to discover the LUN. simulator:/$ lsscsi [1:0:0:0] cd/dvd NECVMWar VMware IDE CDR10 1.00 /dev/sr0 [2:0:0:0] disk VMware, VMware Virtual S 1.0 /dev/sda As you see, we only have the cdrom device and the disk where the OS is installed. Lets discover the iSCSI target: simulator:/# iscsiadm -m discovery -t st -p 192.168.233.131 192.168.233.131:3260,1000 iqn.1992-08.com.netapp:sn.99923498 Now check or SCSI devices, just to keep a pre discovery view simulator:/# lsscsi [1:0:0:0] cd/dvd NECVMWar VMware IDE CDR10 1.00 /dev/sr0 [2:0:0:0] disk VMware, VMware Virtual S 1.0 /dev/sda Now restart the iSCSI service: simulator:/# /etc/init.d/open-iscsi restart * Disconnecting iSCSI targets [ OK ] * Stopping iSCSI initiator service [ OK ] * Starting iSCSI initiator service iscsid [ OK ] ln: target `/lib/init/rw/sendsigs.omit.d/' is not a directory: No such file or directory * Setting up iSCSI targets [ OK ] Finally, list SCSI devices again: root@simulator:/# lsscsi [1:0:0:0] cd/dvd NECVMWar VMware IDE CDR10 1.00 /dev/sr0 [2:0:0:0] disk VMware, VMware Virtual S 1.0 /dev/sda [3:0:0:1] disk NETAPP LUN 7340 /dev/sdb Creating an FS inside the LUN Run fdisk and create a new partition inside the LUN and then format the partition. Run: fdisk /dev/sdb, create the partition and write the partition table to the disk. Then run mkfs.ext4 (this is just another one of my choices), Run: mkfs.ext4 /dev/sdb1 Finally mount the partition, Run: mount /dev/sdb1 /mnt.

11

Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

APENDIX A: INSTALLING A CLUSTERED SIMULATOR


This document originally described how to build the simulator as a single node, but the simulator also supports clustered mode. This appendix describes how to install the Data Ontap simulator in cluster mode. When you run setup.sh script it is not much different from installing the simulator in single mode. Using as reference the step numbers from the Recipe section: Step 13: Would you like to install as a cluster? [no]: yes

After setup completes, and if you decided to install under standard directory /sim, you will have two directories within /sim, node1 and node2, and inside of these directories, you will find the same scripts and files you would find over /sim one a single node installation. Browse down to /sim/node1 and execute runsim.sh, there are some key configurations, lets review all the inputs required, and include some comments on the relevant ones when talking about clustering: Please enter the new hostname []: node1 Do you want to enable IPv6? [n]: Do you want to configure virtual network interfaces? [n]: Please enter the IP address for Network Interface ns0 []: 192.168.1.110 Please enter the netmask for Network Interface ns0 [255.255.255.0]:

Be aware of what ip are you setting here since you will have to indicate it to the partner.

Should interface ns0 take over a partner IP address during failover? [n]: y

Here you are telling the simulator if a takeover occurrs ns0 interface will configure an additional IP to keep servicing node2 storage to the network. This is the ip of ther partner, that will be configured to ns0 in case of a takeover of node2 resources by node1.

Please enter the IPv4 address or interface name to be taken over by ns0 []: 192.168.1.111 Please enter media type for ns0 {100tx-fd, auto} [auto]: Please enter the IP address for Network Interface ns1 []: Should interface ns1 take over a partner IP address during failover? [n]: Would you like to continue setup through the web interface? [n]: Please enter the name or IP address of the IPv4 default gateway: 192.168.1.1 Please enter the name or IP address of the administration host: 192.168.1.101 Please enter timezone [GMT]: Where is the filer located? []: Argentina 12 Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

What language will be used for multi-protocol files (Type ? for list)?:en_US Do you want to run DNS resolver? [n]: Do you want to run NIS client? [n]: Do you want to configure the Shelf Alternate Control Path Management interface for SAS shelves [n]: n Setting the administrative (root) password for node1 ... New password: Retype new password: Do you want to make the system visible via WINS? [n]: A filer can be configured for multiprotocol access, or as an NTFS-only filer. Since multiple protocols are currently licensed on this filer, we recommend that you configure this filer as a multiprotocol filer (1) Multiprotocol filer (2) NTFS-only filer Selection (1-2)? [1]: 1

Enter the password for the root user []:

The default name for this CIFS server is 'NODE1'. Would you like to change this name? [n]: Data ONTAP CIFS services support four styles of user authentication. Choose the one from the list below that best suits your situation. (1) Active Directory domain authentication (Active Directory domains only) (2) Windows NT 4 domain authentication (Windows NT or Active Directory domains) (3) Windows Workgroup authentication using the filer's local user accounts (4) /etc/passwd and/or NIS/LDAP authentication Selection (1-4)? [1]: 4 What is the name of the Workgroup? [WORKGROUP]: Once it is operational, open a second ssh session to the server hosting the simulator, and browse down to /sim/node2 and execute runsim.sh script, same configuration sequence as in node1 will be executed:

Please enter the new hostname []: node2 Do you want to enable IPv6? [n]: Do you want to configure virtual network interfaces? [n]:

13

Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

Please enter the IP address for Network Interface ns0 []: 192.168.1.111 Please enter the netmask for Network Interface ns0 [255.255.255.0]:

Here set the IP you entered while configuring node1 that would be taken over.

Should interface ns0 take over a partner IP address during failover? [n]: y

Here you are telling the simulator if a takeover occurrs ns0 interface will configure an additional IP to keep servicing node2 storage to the network. This is the ip of ther partner, that will be configured to ns0 in case of a takeover of node1 resources by node2.

Please enter the IPv4 address or interface name to be taken over by ns0 []: 192.168.1.110

Please enter media type for ns0 {100tx-fd, auto} [auto]: Please enter the IP address for Network Interface ns1 []: Should interface ns1 take over a partner IP address during failover? [n]: Would you like to continue setup through the web interface? [n]: Please enter the name or IP address of the IPv4 default gateway: 192.168.1.1 Please enter the name or IP address of the administration host: 192.168.1.101 Please enter timezone [GMT]: Where is the filer located? []: Argentina What language will be used for multi-protocol files (Type ? for list)?:en_US Do you want to run DNS resolver? [n]: Do you want to run NIS client? [n]: Do you want to configure the Shelf Alternate Control Path Management interface for SAS shelves [n]: Setting the administrative (root) password for node2 ... New password: Retype new password: Do you want to make the system visible via WINS? [n]:

14

Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

A filer can be configured for multiprotocol access, or as an NTFS-only filer. Since multiple protocols are currently licensed on this filer, we recommend that you configure this filer as a multiprotocol filer (1) Multiprotocol filer (2) NTFS-only filer Selection (1-2)? [1]: 1 CIFS requires local /etc/passwd and /etc/group files and default files will be created. The default passwd file contains entries for 'root', 'pcuser', and 'nobody'. Enter the password for the root user []: Retype the password: Would you like to change this name? [n]: Data ONTAP CIFS services support four styles of user authentication. Choose the one from the list below that best suits your situation. (1) Active Directory domain authentication (Active Directory domains only) (2) Windows NT 4 domain authentication (Windows NT or Active Directory domains) (3) Windows Workgroup authentication using the filer's local user accounts (4) /etc/passwd and/or NIS/LDAP authentication Selection (1-4)? [1]: 4 What is the name of the Workgroup? [WORKGROUP]:
At this point you should have both nodes running, login to both of them and add the cluster license as indicated in section Installing Licenses of this document. After installing the license in both nodes, reboot them using reboot command. Once they have closed, run again the runsim.sh script to start both nodes. Once both nodes are up, in any of them run the cf status command to ensure clustering is enabled. If it is disabled run cf enable command, running it on any of the nodes will enable it for the cluster, voila! You have a clustered simulator. Lets take a look to the simulated physical configuration, node1 will be the owner of the shelves, they will be connected under the adapter you selected during installation, in my case, v0. Partner will access these shelves via v4 adapter. Then node2 has 1 shelf with 2 disks (mailbox) in v0 which will be accessible via v4 port in in node1. Take a look to the following diagram to understand how everything is connected.

15

Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

16

Hernn J. Larrea www.hernanjlarrea.com.ar

NetApp Data Ontap Simulator Cookbook

ABOUT THE AUTHOR


Im Hernn J. Larrea, an IT engineer with 8 years of experience in the field. I decided to address my career in Wintel technologies, specially Active Directory, Backup and Recovery environments, Storage solutions and a little programming in .NET. Most of the times when I write I try to write things I believe will become useful to others going through the same or similar path Ive traveled and I would have liked to find a document like this one. If you want to know more about me, I invite you to visit my personal website http://www.hernanjlarrea.com.ar or my blog at http://blog.hernanjlarrea.com.ar and if you want to email me, you can do it at hjlarrea@hotmail.com Hernn J. Larrea

17

Hernn J. Larrea www.hernanjlarrea.com.ar

Das könnte Ihnen auch gefallen