Beruflich Dokumente
Kultur Dokumente
General Catalogue
Company
Since 1970 Comat AG has been the competent supplier of equipment and systems for industrial automation. In 1996 the company introduced a Quality Management System certified in accordance with ISO norm 9001. As a successful manufacturer in the industrial electronics field, Comat enjoys an outstanding world-wide reputation with its first-class range of industrial-, time delay- and monitoring relays. A variety of international patents underline the high degree of innovation. The subsidiary companies in Spain, Releco S.A. and in China, Comat (Tianjin) Industrial Electronic Co., Ltd. are members of the Comat group. All our own products are continually being re-designed and kept up to date in accordance with the latest state-ofthe-art technology. As always, Comat manufactures all its own products at its headquarters in Worb, Switzerland. The in-house development department enables us to react swiftly and flexibly to changing customer requirements. In addition, customer-specific developments can also be realized in the usual business sectors. Starting from its position as the Swiss home market leader, Comat exports its products to 43 agencies in the most industrial countries, supported by a competent in-house team of product specialists. Comat is therefore able at any time to provide its customers comprehensive, technical advice and can actively provide support for problem solutions. In addition, Comat has established itself in the Swiss market as the general agent for well-known international manufacturers. Most of these suppliers are market leaders in their product segments. With its own calibrating laboratory for pressure and electrical parameters, accredited in accordance with EN ICO/IEC 17025, Comat also provides a calibration service of the utmost accuracy. Comat AG has devoted itself to unconditional customer satisfaction and subordinates all business activities to this end. The companys philosophy proves this clear business policy, both externally as well as internally.
Index
Page 3
Page 5
1 2 3 4 5
Page 51
Page 103
Monitoring Relays
Page 111
Page 133
Comat, since over 35 years a strong name in the field of industrial electronics.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
KAT 2008
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Index
Industrial Relays Typ C2 C3 C4 C5 C7 C9 C10 C12 C14 C21 C22 C31 C32 C33 C34 C35 C36 C37 C38 C39 C103.01 C103.06 C133.01 C203.01 C203.04 C203.06 C301.04 C301.08 C311.08 CHA1 CINT-11 CINT-12 CINT-15 CINT-18 CINT-21 CINT-22 CINT-25 CINT-28 CINT-51 CINT-52 CINT-53 CINT-61 CINT-62 CINT-63 CPF11 CPF22 CR11C CR16AX CR16CX CR23A CR31 CR33A CRS1C CT2 CT3 CTV11 KA108 KA115 KA208 KD125 KD215 Page 22 23 24 25 16 18 13 14 13 28 28 29 29 30 30 40 40 40 40 30 37 37 37 37 37 37 37 45 45 12 10 10 10 10 10 10 10 10 11 11 11 11 11 11 46 46 36 36 36 36 17 36 36 32 32 45 41 41 41 42 42 Typ KD315 KDM3-24 KDW3-24 KR13 KR23 KR33 RC1 RCL1 RD1 RD2 RD3 RDL1 RDL2 RDL3 RIC20 RIC25 RIC40 RIC63 RIC-AUX RL1 SOC-2 SOC-6 SS-1BM SS-1HM SU-404M SU-422M SU-440M Page 42 43 44 19 19 19 33 33 33 33 33 33 33 33 50 50 50 50 50 33 49 48 48 48 48 48 48
Time Delay Relays Typ AA2 AA2M AE2 AE2M AM1 AM2 AM3 C52 C53 C53.3 C53.4 C55 C55.3 C55.4 C56 C63 C64 C65 C66 C81 C82 C83 C84 C85 CCX-350 CCX-550 CEA-126 CEA-226 CFG-126 CIM1 CM1 CM1L CM2 CM3 CN135 CNR1 CNS-4 CPF11 CPF22 CPX-129 CPX-519 CRA1 CRE1 CRT3 CRV1 CRV2 CRV3 CS1 CS2 CS3 CSV2 CT1 CT1L CT2 CT3 CT30 CT32 CT33 CT36 CTI-129 CTI-519 Page 82 82 82 82 84 84 84 70 70 71 71 70 71 71 70 68 69 69 69 67 67 67 67 67 95 95 79 77 79 84 85 85 85 85 90 86 90 94 94 78 77 82 82 83 83 83 83 68 68 68 83 86 86 61 61 63 63 63 63 78 77 Typ CU23 CWR-102 CX 38 CX 39 CY1 ECO31 ECO32 RS 41-M RS 121 RS 121.P RS 121.R RS 122-H RS 122-M RS 122-MH RS 321 RS 521 SBV11 SSV11 SFR1 SFR2 Page 91 79 80 80 82 87 87 76 74 74 74 75 75 75 76 76 93 93 92 92
Monitoring Relays Typ CT512 CT515 CT516 CT524 CUEBI CUEBU ECR-3D EOCR-AR ESU-D2 EUCR-BR MV52 MV53 MV62 SRCT-35 SSU11 SSU12 SSU13 SSU14 SSU16 SSU22 SSU23 SSU24 SSU25 SSU26 SSU29 SSU31 SSU33 SSU34 SSU36 SSU72 SSU73 SSU74 SSU75 SSU76 SSU79 TSR19 Page 123 123 123 116 124 117 121 120 130 120 114 115 114 122 118 118 118 118 118 118 118 118 118 118 118 128 126 127 127 118 118 118 118 118 118 132
Installation Relays Type A333 AL1 AL2 AL3 AL4 AL4C AL5 B103 CIM1 CRS1C RIC20 RIC25 RIC40 RIC63 RIC-AUX Page 107 108 108 108 109 109 109 107 106 106 110 110 110 110 110
Socket 11PGL C11A C12B C12B0 C12B1 CS8 CS11 CS18 EC8 EC11 98 98 98 98 98 98 98 98 98 98
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
KAT 2008
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Industrial Relays
Interface Relays Miniature Relays Standard Relays Long Life Relays Time Cubes and Relay-Modules DIN Relays Solid-State Relays Miniature Contactors
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
KAT 2008
Industrial Relays
Industrial relays
Se rie s
Interface Relays
Interface Module ultra slim Interface Module ultra slim Interface Module 2-pole Interface Module 2-pole
Relays for switching of PLC I/OS
So ck
6A 2A 10 A 8A 10 A 10 A 5A
C7 CR 31 C9 KR13 KR 23 KR 33
10 A 10 A 5A 3A 2x 3A 3x 3A
Miniature Industrial Relays 4-pole Miniature Signal Relays 2-pole Miniature Signal Relays 2-channel Miniature Signal Relays 3-channel
C2 C3 C4 C5
10 A 10 A 10 A 16 A
C21 C 22 C 31 C 32 C 33 C34 C 39
10 A 6A 10 A 6A 2x 10 A 2x 5 A 3x 5 A
LONG LIFE Industrial Relays 3-pole LONG LIFE Power Relays 2-channel LONG LIFE Signal Relays 2-channel LONG LIFE Signal Relays 3-channel
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Pa ge
10 10 11 11 12 13 14 16 17 18 19 19 19 22 23 24 25 28 28 29 29 30 30 30
Relays Overview
Co nta c
et
Industrial relays
Se rie s
DIN-Relais
Power Relays 1-pole Control Relays 2-channel Control Relays 3-channel Signal Relays 2-pole
Direct snap on Industrial Relays: Power Relay Contol Relay with twin contacts Signal Relay with gold contact Step-on/ Step-off Relay
So ck
6A 2x 3A 3x 3 A 1A 6A 6A 6A 2x 5 A 3x 5 A
Pa ge
36 36 36 36 36 37 37 37 37 UC 0,8 A 2x 0,8 A 5A 2x 2A Triac 0,8 A Triac 1,5A 40 40 40 40 41 41 41 42 42 42 43 44 45 45 46 46 2,5 A 2x 1,5 A 3x 1,5 A 3A 3A 250 mA 3x 2 A 2A 2x 150 mA 20 A 20 A 20 A 25 A 40 A 63 A 48 49 50 50 50 50
Outline Overview
Step-on Step-off Relays Power Relays 1-pole Power Relays 2-pole Control-/Signal Relays 2-channel Control Relays 3-channel
C 35 C 36 C 37 C 38 KA108 KA115 KA 208 KD125 KD 215 KD 315 KDM 3-24 KDW 3-24 CTV11 DIN 35 DIN 35 DIN 35
DC Solide State Relays 2-channel Universal AC Solide State Relays 1-channel Universal AC Solide State Relays 1-channel Universal AC Solide State Relays 2-channel Universal DCSolide State Relays 1-channel Universal DC Solide State Relays 2-channel Universal DC Solide State Relays 3-channel DC Motor Control Relays with brake function UC Solide State Changeover Relays Switching Amplifier 1-channel Switching Amplifier 3-channel Pulse Shaper Pulse Shaper
Triac 2x 0,8 A
Miniature Contactors
Universal Miniature Contactors Universal Miniature Contactors Installation Contactors
With 3 main contacts 20...63A and auxilliary twin signal contacts 10A. Contact openings >3 mm, test voltage 4000V. Specially suitable for save breaking in low voltage circuits.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
KAT 2008
Industrial Relays
Co nta c
et
General information
Contacts There are several different types of contact materials for relays. The main distinction can be made between single contacts and twin contacts. While single contacts are more suitable for higher loads, twin contacts are significantly more reliable for low switching loads, i.e. < 24 V, < 100mA. Contact material There is no all-purpose universal contact. AgNi is used as a standard contact material for a wide range of applications. For applications in aggressive atmospheres, AgNi contacts with hard gold plating (up to 10 m) are recommended. There is however no other purpose then corrosion protection during storage. Relays with tungsten pre-contacts are available for very high switching currents (up to 500A, 2.5 ms. Minimum load The minimum load values are recommended values under normal working conditions i.e. regular switching, no special ambient conditions, etc. Under these conditions reliable switching can be expected. Contact resistance In practice the contact resistance may vary depending on the switching load and other environmental conditions. For higher currents the contact resistance is around 10m. Contact spacing Normally all open contacts have an air gap between 0,5 .. .1.5mm. They are referred to as contacts according to the Low-Voltage Directives and associated standards. These contacts are not suitable for safe disconnection. For switching of DC loads, large contact clearances are requested for the quenching of the electric arcs. (Pls.refer to special relays: Series connections.) Switching capacity The contact switching capacity is the product of switching voltage and switching current. For AC, the permitted switching capacity is generally enough to handle the max. continuous AC1 current over the whole voltage range. It is not allowed to exceed the load limit curve for DC switching because a remaining switch-off-arc would destroy the relay immediately. The DC switching capacity is 100W (DC 1). Drive (coil) A distinction is made between standardised voltages according to EN 60947 as guaranteed values, and typical values which can be expected with a high degree of probability. Pick-up voltage, Release voltage The pick-up voltage is the voltage at which the relay engages safely. The typical trip voltage for DC is approx. 65% of Unom and approx. 75% of Unom for AC. The release voltage is approx. 25 %, resp. 60% of Unom. For DC, these voltages depend strongly on the temperature coefficient for Cu. This is however not the case for AC, where the constant inductive resistance over a wide temperature range is the controlling factor. Under voltages in AC relays results in humming and armature fluttering and should therefore be avoided. Operating voltage range The upper voltage limit of the coil is determined by the heat and the ambient temperature. The self-heating trough the contacts under high loads should not be underestimated since it may even be higher than the dissipated energy of the coil. Significantly high but short period overvoltage however provides no problem for intermittent operations. In doubt please consult our specialist or ask for the respective characteristic curve diagram. Coil connections Different coil connections can be integrated into the relay as an option. A costeffective freewheeling diode is available for DC coils. Please note that the stated release times are generally specified without the coil connection. While an additional LED status indicator has practically no effect, a freewheeling diode (D) will lead to an increase in release time by a factor 2 to 5, or 0 ms to 30 ms. For AC coils, VDRs or RC elements may be used. In this case resonance effects may have to be considered. VDRs and common RC elements may increase release times by < 5 ms. General design Comat (Releco) relays are made from carefully selected high-quality materials. The components comply with the latest environmental regulations such as RohS. The meticulous design makes the relays particularly suitable for any industrial application and engineering installation. The robust terminals, mechanical position indicator, dynamic and permanent hand activators, all integrated in the standard relay make them particularly service friendly. Colour coded hand test buttons dependent on the type of coil voltage is another useful feature. Options - Different coil connections - Freewheeling diodes - LED displays - Bridge rectifiers for AC/DC drives, etc. Additionally, because of short-term availability of special versions for practically any drive voltage up to DC 220V / AC 400 V the relays are a cost effective solution for many applications For safety reasons, manual operated test buttons may be replaced with a blank button, if required. Further information To select the most suitable relay and to guarantee a reliable operation and a long service life for the application, several factors need to be considered. In particular these are: -Number of cycles -Switching frequency -Ambient conditions -Load type -Switch-on current and load switch-off energy. Example If the number of cycles are expected to exceed > 100,000 operations per year. (E.g. clock generators, fast running machines), an electronic solution is perhaps more appropriate. Comat is able to offer a suitable relay from our standard product range. In AC applications, crosstalk caused by long control leads is often a problem and can result in constant humming of the relay or even inadvertent triggering due to interference. Here too, we offer solutions. Various, apparently harmless loads may lead to very high switch-on currents or switch-off energy values This may result in an unacceptable reduction of the service life. Inductive DC loads are especially harmful. Characteristics of various loads: Heating circuits No high switch-on currents, no high switch-off loads. Incandescent lamps, halogen lamps Switch-on currents during a few ms in the range 10 x rated IN. Switch-off at rated load. Low-energy lamps Very high, with very short switch-on currents due to built-in decoupling capacitors. Contacts have a tendency to fuse. Transformers, AC contactors Switching on during zero-transition may avoid high inrush currents. If switching before or after the zero crossing, switch-on currents of 8. . .15 x rated IN.may occur. High inductive switch-off energy is possible. The load must be wired, due to EMC problems.
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
Industrial Relays
Interface Relays
Triac
CINT18 CINT28
CINT15 CINT25
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
Solid-State
&
KAT 2008
Industrial Relays
Interface modules
AC 230V A
Interface-Solide-State Modules
DIN
12 11 14
12 NC COM 11
Max. 6A 250V (see module)
12 11 14
AVING SPACE S
RELAY (+) RELAY
14
COMAT SOCKET
12
11
CINT1/ UC6-24V U
LABEL
OUT
NO
14
LABEL
CINT12/UC24V
(+)
A2
A1
MODULE
SOCKET
MODULE
CINT-R2/ UC24V U
RELAY
RELAY
A1(+)
COIL
MADE IN EC
A2()
and others:
www.comat.ch
Data at Tamb. =20 C (standard coil)
Contact material Switching power AC1 Switching power DC1 Switching power AC15 Peak inrush current Switching cycles: mechanical/electrical Contact resistance/voltage drop Operation voltage AC50/60Hz / DC Power consumption Pmax. 24V Power consumption Pmax. AC230V On delay/release time Parallel circuit
UC
50/60 Hz /
DC
10%
Ordering example Module dinterface CINT-21/UC24V Accessories/Sparte parts Connector bridge CINT-BR20
(packing unit: 2x 10pin)
14
88,5
47.0
14
TS 35
93,5
49,2
TS 35
41,5
A1
A1 A2
A2
6,2
3,4
73
6,2
44,3
10
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
01
01
A1
6-24 6-24
14 11 SOCKET 12
A2
A1 A2
A1 A2
6,2
With cage clamp terminals (1x 0,2 - 2,5 mm 2) CINT-21, -22, -25, -28
CINT-11, CINT-21
Interface Module
for PLCs and process control. High power contact AgSnO2. With screw terminals (CINT-11) or cage clamp terminals (CINT-21).
CINT-12, CINT-22
Interface Module
for PLCs and process control. Signal contact AgNi +5 Au. With screw terminals (CINT-12) or cage clamp terminals (CINT-22).
CINT-15, CINT-25
Interface Module
for PLC`s and process control. DC solid-state switch NO, pnp. Integrated transient clamp circuit. For fast and high frequency switching. With screw terminals (CINT-15) or cage clamp terminals (CINT-25).
CINT-18, CINT-28
Interface Module
for PLC`s and process control. AC solid-state switch type NO synchronous switching triac. For fast and high frequency switching. With screw terminals (CINT-18) or cage clamp terminals (CINT-28).
MAX MIN
6 A 250 V A
10mA 12V
6 A 250 V A
1mA 1V
2 A 24 V D
1mA 6V
2 A 250 V A
10mA 12V
0,7...1,25Un 0,8...1,2UN 0,8...1,2UN 240mW 240mW 240mW 1,1W 1,1W 5ms/10ms <1ms 5ms/10ms All modules have an internal parallel diode circuit; green LED status indication. 24, 230 CINT-11/UC.....V CINT-21/UC.....V 24, 230 CINT-12/UC.....V CINT-22/UC.....V CINT-15/DC24V CINT-25/DC24V CINT-R1/UC110-240V CINT-R1/UC24V CINT-R2/UC110-240V CINT-R2/UC24V CINT-R5/DC24V
12 11
12 11
3,4
73
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Interface Modules
Industrial Relays
RELAY
DIN
CINT-52/62 CINT-53/63
A1 A2 SOCKET 12 11 14 22 21 24
With cage clamp terminals (1x 0,5 -2,5 mm 2) CINT-61, -62, -63
CINT-51, CINT-61
Interface Module Complete with integrated LED and relay.ul.
Test voltage: 3600V Isolation / // / : 4000Vrms // 2000Vrms Tamb. operation/storage:
CINT-52, CINT-62
Interface Module
for PLCs and process control. 1x CO signal contact AgNi+5 Au. With screw terminals (CINT-52) or cage clamp terminals (CINT-62). With LED output status display.
Interface Module
for PLCs and process control. 1 x CO high power contact AgSnO2. With screw terminals (CINT-51) or cage clamp terminals (CINT-61). With LED output status display.
-20..+55/ - 40..+85C
and others: MAX MIN
10 A (13 A) 250 V A
50mA 24V
8 A 250 V A
1mA 12V
8 A 250 V A
10mA 24V
www.comat.ch
Data at Tamb. =20 C (standard coil)
Contact material Switching power AC1 Switching power DC1 Switching power AC15 Peak inrush current Switching cycles: mechanical/electrical Contact resistance Operation voltage AC50/60Hz / DC Power consumption Pmax. 24V Power consumption Pmax. AC230V On delay/release time Parallel circuit
AgSnO 2 2500VA ...300W 300VA /230V 100A /5ms 10x106 /105 <100m
0,8...1,2UN 0,8...1,2UN 0,8...1,2UN 480mW 480mW 480mW 1,1W 1,1W 1,1W 5ms /10ms 5ms/10ms 5ms/10ms All modules have an internal parallel diode circuit; green LED status indication. 24, 230 CINT-51/ UC.....V CINT-61/ UC.....V CINT-R21/UC110-240V CINT-R21/UC24V 24, 230 CINT-52 / UC.....V CINT-62 / UC.....V CINT-R22/UC110-240V CINT-R22/UC24V 24, 230 CINT-53 / UC.....V CINT-63 / UC.....V CINT-R23/UC110-240V CINT-R23/UC24V
UC
50/60 Hz /
22 NC 12 21 COM 11 24 NO 14
22 NC 12 21 COM 11 24 NO 14
Ordering example Interface module CINT-51/UC24V Accessories/Spare parts Connector bridge CINT-BR8/5
(packing unit: 1x 5 pieces)
48,5
TS 35
RELAYS
RELAYS
91
93
42,5
220-240 VU
A1 A2
A2
14
3,4
72
14
72
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
11
KAT 2008
UR PLC FOR YO
A1 A2
B1 B2
24 V 300 mA
24V AC/DC
B1
24V AC/DC
24V 300mA
B2
A1(+)
A2()
CHA1 / UC 24 V U ON
B1 S
B2
A1(+)
A2()
ON OFF AUTO
ON OFF AUTO
A3
01
11
12
14
MADE IN EC-01
10A 250V
AUT
10A 250 V A
OFF ON
01
A3
11
12
14
11 A3
10A 250V
12 14
CHA1
Interface Module
Complet with hand switch and LED for AUTO position indication. Test voltage: 3000V Tamb. operation/storage: -10..+50/ - 40..+85C
Interface Module
for control systems with 1x CO high power contact, 1x NO signal contact 300mA. Installation: 45mm front dimension. Front setting: AUTO-ON-OFF for maintenance and emergency operation
and others:
www.comat.ch
Data at Tamb. =20 C (standard coil)
MAX MIN
10 A 250 V A
10mA 12V Power contact AgCdO 10A 250V 2500VA 500VA/230V ...250W 100A 2,5ms 10x106 <100m 0,8..1,2UN 1,1UN (10A) 400mW/24V CHA1/UC24V Signal contact Ag 300mA /30V 10VA 10W 0,5A 103 <100m
Contact material Switching current/voltage Switching power AC1 Switching power AC15 Switching power DC1 Peak inrush current Mechanical switching cycles Contact resistance Operation voltage AC50/60Hz Operation voltage DC Power consumption Pmax
UC
50/60 Hz /
A1 A2
B1 B2
TS35
84
45
26,5 17 58
12 14
12
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
62
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Power Relay
Control Relay
3 Au
Signal Relay
Industrial Relays
10 Au
AC230V
DC24V
UC24V
WH: 12,5 x 29
RELAY
RELAY
RELAY
RELAY
C14 - A10
1-pole Miniature Industrial Relay
Extremley rigid terminal pins (Faston 4,8mm) Test voltage: 5000V Tamb. operation/storage: -20..+60/ - 20..+100 C
C10 - A10
Universal Power Relay 10 A
for AC- and DC-circuits ranging from 10mA 10V. With lockable manual activation button and mechanical status display.
C10 - T13
Relay like .. A10, but with twin contacts 6 A
the control relay with highest switching reliability for control circuits ranging from 5mA 5V. With lockable manual activation button and mechanical status display.
C10 - T12
Relay like ..T13, but with 10 gold plated twin change over contacts
for highest switching reliability. Suitable for signal circuits ranging from 1mA 5V. Recommended for applications up to 0,2A 30V. With lockable manual activation button and mechanical status display.
and otheres:
www.comat.ch
Connection No. on socket
MAX MIN
10 A 250 V A
10mA 10V 3 2 1 12 11 14
z
10 A 250 V A
10mA 10V 3 2 1 12 11 14
z
6 A 250 V A
5mA 5V 3 2 1 12 11 14
z
6 A 250 V A
1mA 5V 3 2 1 12 11 14
z
+
A2 5 A1 4 A2 5
+
A1 4 A2 5
+
A1 4 A2 5
+
A1 4
Contact material Switching load AC1/ DC1 Peak inrush power Switching cycles mech./electr. (AC1) Operation voltage AC 50 Hz / DC Power consumption AC / DC Triggering delay / release time
Standard
AgNi 2500VA/...300W//10A 30V D 30A(20ms) 20 x106/ 105 0,8...1,2UN 1,1VA/700mW 11/8ms 24, 115, 230 / AC ..... V
AC
50/60Hz C14-A10
Standard
AC
50/60Hz C10-A10X 24, 48,110 / DC ..... V
C10-T13X
C10-T12X
Standard
DC
20% C14-A10
Standard
DC
20%
12, 24, 48,110 C10-A10X / DC ..... V 12, 110 C10-A10FX / DC ..... V 24, 48 C10-A10BX / UC ..... V
12, 24, 48,110 C10-T13X / DC ..... V 12, 110 C10-T13FX / DC ..... V 24, 48 C10-T13BX / UC ..... V
12, 24, 48,110 C10-T12X / DC ..... V 12, 110 C10-T12FX / DC ..... V 24, 48 C10-T12BX / UC ..... V
XX F BX
DC DC
20% 20%
UC
50-400 Hz /
12 11 14
12 11 14 3 2 1
Term. 2 (11)
S10-B
75
(Option)
Ordering example Relay C10-A10X/DC24V Socket CS-106 (clip incl.) Connector S10-B
Term. 5 (A2) S10-B Incl. Clip S10-CG *)
5 CS-116 6 4 5 CS-116 6 4 A2 A2 A1 A2 A2 A1
75
Busbar S10-B
23
35,5 / 31 (C15)
17
23
35,5 / 31 (C14)
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
13
KAT 2008
Signal Relay
10 Au
DC24V
WH: 12,5 x 29
RELAY
RELAY
C10: 35,5
C12-A 21
2-pole Miniature Industrial Relay
Rigid terminal pins Test voltage: 5000V 3000V Tamb. operation/storage: -20..+60/ - 20..+100 C
C12- A 22
Signal Relay 5 A
With gold plated twin change over contacts for increased switching reliability. Suitable for AC- and DCcircuits ranging from 5mA 5V. With lockable manual activation button and mechanical status display.
UniversalControl Relay 5 A
With two change over contacts for AC- and DC- circuits ranging from 10mA 10V. With lockable manual activation button and mechanical status display.
and otheres:
www.comat.ch
Connection No. on socket
MAX MIN
5 A 250 V A
10mA 10V
9 8 7 3 2 1 12 11 14
5 A 250 V A
5mA 5V
9 8 7 3 2 1 12 11 14
22 21 24
z
22 21 24
z
+
A2 A2 5 6 A1 4 A2 A2 5 6
+
A1 4
Contact material Switching load AC1/ DC1 Peak inrush power Switching cycles mech./electr. (AC1) Operation voltage AC 50 Hz / DC Power consumption AC/DC Triggering delay / release time
Standard
AgNi + 0,3 Au 1250VA/...150W// 5A 30V D 15A(20ms) 10x106/ 105 0,8...1,2UN 1,1VA/700mW 10/8ms 115, 230 / AC ..... V
AgNi+10 Au 1250VA/...150W// 5A 30V D 15A(20ms) 10x106/ 105 0,8...1,2UN 1,1VA/700mW 10/8ms 115, 230 C12-A22X / AC ..... V 12, 24, 48, 110 C12-A22X / DC ..... V 12, 110 C12-A22FX / DC ..... V 24, 48 C12-A22BX / UC ..... V
AC
50/60Hz C12-A21X
Standard
DC
20%
12, 24, 48, 110 C12-A21X / DC ..... V 12, 110 C12-A21FX / DC ..... V 24, 48 C12-A21BX / UC ..... V
XX F BX
DC DC
20% 20%
UC
50-400 Hz /
Conductor bridge for interface socket CS-112 and CS-116 Type: V10-G V10-R V10-B V40-G
75
V40-R V40-B
Ordering example Relay C12-A21X/DC24V Socket CS-112 (clip incl.) Conductor bridge V40-B
5 CS-112 6 4 5 CS-112 6 4 A2 A2 A1 A2 A2 A1
A2 -A2
17
14
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Industrial Relays
Miniature Relays
&
www.comat.ch
Remanence
KR13
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
15
KAT 2008
Industrial Relays
DC 24 V D
AC 230V A
DC 24 V D
AC 230V A
37,5
WH: 21x 28
C7-A 20
2-pole Miniature Industrial Relay
lockable manual operation mechanical flag indicator Test voltage: 2500V 2500V
C7-T21
Relay like .. A20, but with twin contacts 6A
the control relay with highest switching reliability for control and signal circuits ranging from 5mA 5V.
C7-T22
Relay like .. T21, but 10 gold plated contacts
the twin contact relay with highest switching reliability for signal circuits ranging from 1mA 5V. Recommended upto 0,2A 30V.
C7- H23
Power Relay 10 A
with supplementary twin contact 6A (3 z Au) for a secondary circuit switch, i.e. to ensure reliable signal of relay switch position to the central control, SPC, distribution system.
C7-W10
Heavy duty Relay for 500 A inrush current
with tungsten special early make contact. Specially suitable for filament and halogen lamps, transformers, etc. No mecanical flag indicator.
and others:
www.comat.ch
Connection No. on socket
MAX MIN
10 A 250 V A
10mA 10V 4 2 3 1 24 22 14 12
z
6 A 250 V A
5mA 5V 4 2 3 1 24 22 14 12
z
6 A 250 V A
1mA 5V 4 2 3 1 24 22 14 12
z
10 / 6 A 250 V A
10mA 10V // 1mA 5V 4 2 3 1 24 22 14 12
z
10 A 250 V A
10mA 10V 4
+
A2 21 8 6 4 6 2 24 22 21 11 A1 5 7 3 5 1 14 12 11 A2 21 8 6 4 6 2 24 22 21
z
+
11 A1 5 7 3 5 1 14 12 11 A2 21 8 6 4 6 2 24 22 21
z
+
11 A1 5 7 3 5 1 14 12 11 A2 21 8 6 4 6 2 24 22 21
z
+
11 A1 5 7 3 5 1 14 12 11
z
A2 8 5 4 5
A1 + 7
+
A2 8
Data at Tamb. =20 C (standard coil)
+
A2 8 AgNi+0,2 z Au 1200VA ...150W 15A(20ms) 20x106/ 2x105 0,8...1,2UN 1,5VA/1W 16/8ms 24, 48, 115, 230 X / AC ..... V A1 7 A2 8 AgNi+10 z Au 1200VA ...150W 15A(20ms) 20x106/ 2x105 0,8...1,2UN 1,5VA/1W 16/8ms
+
A1 7 A2 8
+
A1 7 A2 8
+
A1 7
A1 7
Contact material Switching power AC1 Switching power DC1 Peak inrush power Switch. cycles mech./electr. (AC1) Operation voltage AC 50 Hz / DC Power consumption AC/DC Triggering delay / release time
Standard
AgNi 2500VA ...250W 30A(20ms) 20x106/ 3x105 0,8...1,2UN 1,5VA/1W 16/8ms 24, 48, 115, 230 C7-A20 X / AC ..... V 12, 24, 48, 110, 125 C7-A20 / DC ..... V 12, 24, 48, 110, 125 C7-A20D X / DC ..... V Option X = with
AgNi // AgNi+3 z Au 2500VA // 1500VA ...250W // ...180W 30A // 15A(20ms) 20x106/ 2x105 0,8...1,2UN 1,4VA/1,1W 15/8ms (30ms DX) 230 / AC ..... V
W/Ag 2500VA ...250W 500A(2,5ms) 20x106/ 3x105 0,8...1,2UN 1,8VA/1,5W 20/10ms 24, 48, 115, 230 C7-W10 X / AC ..... V 12, 24, 48, 110, 125 C7-W10 / DC ..... V
AC
50/60Hz
C7-T21
24, 48, 115, 230 C7-T22 X / AC ..... V 12, 24, 48, 110, 125 C7-T22 / DC ..... V 12, 24, 48, 110, 125 C7-T22D X / DC ..... V
C7-H23X
Standard
DC
10%
12, 24, 48, 110, 125 C7-T21 / DC ..... V 12, 24, 48, 110, 125 C7-T21D X / DC ..... V
D, DX
DC
10%
24 C7-H23DX / DC ..... V
= Type X (option)
Entire series of C7. Comply to IEE 323 and IEE 344 (seismic qualified) Interface socket CS-109 (all connections on top)
24 22 14 12 4 21 6 2 3 11 2 5 1 24 22 14 12 4 21 6 2 3 11 5 1
Ordering example Relay C7-A20X/AC230V Socket ... Socket CS-18 Retaining clip RC-G (option) Socket CS-109 (clip incl.) A2-connector S7-B (option) Socket S7-P (page 5*) Retaining clip RC-G (option)
2 4 6 8 1 3 5
75
CS-18
Clip RC-G
CS-109 CS-109
S7-B
7 A1
21 11
75
8 A2
7 A1
8 A2
(A2)
Clip S9-CG
22,5
22
37,5
22,5
16
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Power Relay
Industrial Relays
CR31 Miniature
CR31/AC230V A
MADE IN EU
CR31D/DC24V D
01
01
MADE IN EU
NC NO COM
+
AgNi
10A 250Va
AgNi
10A 250Va
22 2124 32 3134121114 A2
285396174
A1
22 2124 32 3134121114 A2
285396174
A1
CR31
3-pole Miniature Industrial Relay
lockable manual operation mechanical flag indicator Test voltage: 2500V 2500V Tamb. operation/storage: -40..+60/ - 40..+80C
and others:
www.comat.ch
Connection No. on socket
MAX MIN
10 A 250 V A
10mA 12V
2 8 5 3 9 6 1 7 4 22 21 24 32 31 34 12 11 14
A2 A2 14 14 AgNi 90/10 2500VA/...250W 20A(20ms) 20x106/ 105 0,75-1,7UN /0,8-1,65UN 1,0VA /0.75W AC:<25/10ms; DC:15/10ms 15/25ms 24, 115, 230 / AC ..... V 24 / DC ..... V 24 / DC ..... V
+ A1
13
Contact material Switching power AC1/DC1 Peak inrush power Switch.cycl. mech./electr.(AC1) Operation voltage DC/AC50Hz Power consumption AC/DC Trigg.delay/release time Trigg.delay/release time DC
Standard
AC
50/60Hz C31
Standard
DC
10% C31
XX F
DC
10% 20% C31D
9 7
1 31 1
5N
24
O
6 4
34 1 4
2N
22
C
3 1
32 12
Relay
75
12 A 300 V
COIL
Ordering example
LED or R/C-Module
MADE IN EU
R/C-Unit
CS-30
Ind.Relay CR31/DC24V Socket CS-30 (clip incl.) LED-Mod. CMX1/UC24-60V Retaining clip CC-30
A2
A1 +
14 13
4k7/0,01F
CMR1/ UC110-240V
32
26
27
470E/0,22 F
CMR1/ UC24-60V
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
17
KAT 2008
Signal Relay
10 Au
Remanence Relay
AC 230V A
DC 24 V D
AC 230V A
37,5
WH: 21x 28
C9 -A41
4-pole Miniature Industrial Relay
lockable manual operation mechanical indication Test voltage: 2500V 1000V Tamb. operation/storage: -20..+60/ - 40..+85 C
C9 - A42
Relay like ..A41, but with 10 z gold plated contacts
for control and signal circuits ranging from 5mA 5V. Recommend. upto 0,2A 30V.
C9 -R21
Remanence Relay with AC or DC coil
A1(13) = ON; A3 (10) = OFF. Minim. triggering time 50ms, permanent triggering admissible. Test voltage 2500V . Without option X.
and otheres:
www.comat.ch
Connection No. on socket
MAX MIN
5 A 250 V A
10mA 10V 8 4 44 42 7 3 6 2 34 24 32 5 1 14 12
z
5 A 250 V A
5mA 5V 8 4 44 42 7 3 6 2 34 24 32 5 1 14 12
z
5 A 250 V A
10mA 10V 8 4 24 22
ON
5 1 14 12
z
22
22
+
A1 21 11 10 13 9 41 31 12 14 1 1
+
A2 41 31 12 14 1 1 A1 21 11 10 13 9
+
A1
A2 21 12 14
OFF
A3 11 10 13 9
Contact material Switching power AC1/DC1 Peak inrush power Switching cycles mech./electr.(AC1) Operation voltage AC50Hz/DC Power consumption AC/DC Triggering delay / release time
Standard
AgNi+0,2 z Au 700VA/...75W 15A(10ms) 20x106/ 105 0,8...1,2UN 1,5VA/1W 10/6ms 24, 48, 115, 230 C9-A41 X / AC ..... V 12, 24, 48, 110, 125 C9-A41 / DC ..... V 12, 24, 48, 110, 125 C9-A41D X / DC ..... V Option X = with
AgNi+10 z Au 700VA/...75W 15A(10ms) 20x106/ 105 0,8...1,2UN 1,5VA/1W 10/6ms 24, 48, 115, 230 C9-A42 X / AC ..... V 12, 24, 48, 110, 125 C9-A42 / DC ..... V 12, 24, 48, 110, 125 C9-A42D X / DC ..... V
AgNi+0,2 z Au 700VA/...75W 15A(10ms) 20x106/ 105 0,8...1,2UN ON:1,2VA/W; OFF: 0,3VA/W 10/8ms ( >50ms) 24, 48, 115, 230 C9-R21 / AC ..... V 12, 24, 48 C9-R21 / DC ..... V
AC
50/60Hz
Standard
DC
10%
D, DX
= Type X (Option)
DC
10%
5
12
42 32 22
3 7
2 6
1 5
2 6
3 7
4 8
75
30
12 11 10 9 14
0,5 x1,2
Ordering example Relay C9-A41X/AC230V Socket CS-114 (clip incl.) Socket S9-P Retaining clip RC-G (option)
CS -114
14
A2
S9 - P
13
9 10 11 12 13 14
13
A1
0,6
RC-G
1,4
9
11
12 11 10
41 31 21
22,5
12,6
13,2
22,5
18
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
6,35 6,35
4,05
Signal Relay 2x
3,5 Au
Signal Relay 3x
Industrial Relays
1
z z
01
3,5 Au
4
100 zA100mV...3A30V D/ 250V A 100 zA100mV...3A30V D/ 250V A
2
z
KR23X/DC24V D
KR13X/DC24V D
1
Case
4 2
z
3 1
4
z
3
z
2
8
+
8 6 5
+
7
+
8 6 5 7
+
6
01
+
7
Case
Case
relay
KR 33 X /DC 24 V D
35,5
01
KR13
Miniature Industrial Relay
1- to 3-channel for control and signal circuits Power consumption only 250mW per channel Test voltage: 2000V 1000V Tamb. operation/storage: -20..+60/ - 40..+85 C
KR 23
Relay like KR13, but 2-channel
with a width of 11mm per channel this relay is especially space-saving and cost-effective.
KR 33
Relay like KR13, but 3-channel
with a width of 7,3mm per channel this relay is especially space-saving and cost-effective.
and others:
www.comat.ch
Connection No. on socket
MAX MIN
3A
250 V A // 110 V D
3A
250 V A // 110 V D
3A
250 V A // 110 V D
100 A 100mV 4 2 24 23
z
100 A 100mV 4 2 3 1 13 2 14 1 13 1 1 4
2 1
100 A 100mV 4 2 13 2 14
z
2
3 1 14 13
3 14
1
1 14
A2 23 8 6
)
13 A1 5 7
A2 8
2 A1
1 A1
A2 2 A1 8 6
3 A1
1 A1
Contact material Switching load AC1/DC1 Peak inrush power Switching cycles mech./electr. (AC1) Operation voltage Power consumption per channel Triggering delay / release time
Ag-alloy+3..5 Au 750VA/...90W//3A 30V D 6A(20ms) 20x106/ 105 0,8...1,2UN 350mW 6/4ms (X: 6ms) 12, 24, 48 KR13A / DC ..... V 12, 24, 48 KR13X / DC ..... V
Ag-alloy+3..5 Au 750VA/...90W//3A 30V D 6A(20ms) 20x106/ 105 0,8...1,2UN 250mW 6/4ms (X: 6ms) 12, 24 KR23A / DC ..... V 12, 24 KR23X / DC ..... V
Ag-alloy+3..5 Au 750VA/...90W//3A 30V D 6A(20ms) 20x106/ 105 0,8...1,2UN 250mW 6/4ms (X: 6ms) 12, 24 KR33A / DC ..... V 12, 24 KR33X / DC ..... V
A X
DC
20%
DC
20%
10
Clip GC-T *)
2 4 6 8 1
B
22 x 65
1 3
2 4 6 8
75
3 5
5 7
R
Clip RC-G Clip GC-W *) 22 x 28
S7- P
CS-18
22,5
5,2
13,1
14,5
Ordering example Relay KR23X/DC24V Socket CS-18 or S7- P Retaining clip RC-G (option)
21 11
22,5
22
35,5
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
19
0,6
Case
0,5 x 2
RC-G
2,2
KAT 2008
30
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
20
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Industrial Relays
Standard Relays
Series
C5-M10
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
21
KAT 2008
Industrial Relays
C2 Standard
Power Relay
Control Relay
AC 230 V A
WH: 35 x 35
DC 24V D
58
C2-A20
2-pole Miniature Industrial Relay according to IEC 67-1
lockable manual operation mechanical flag indicator Test voltage: 2500V 2500V Tamb. operation/storage: -20..+60/ - 40..+85 C
C2-T21
Relay like .. A20, but with doubel contacts 6A
The control relay with highest switching reliablility for control and signal circuits ranging from 5mA 5V.
and others:
www.comat.ch
Connection No. on socket
MAX MIN
10 A 250 V A
10mA 10V 6 5 4 3 24 22 12 14
z
6 A 250 V A
5mA 5V 6 5 4 3 24 22 12 14
z
+
A2 21 7 8
)
+
A2 21 7 8 11 A1 1 2
11 A1 1 2
Contact material Switching load AC1/DC1 Peak inrush power Switching cycles mech./electr.(AC1) Operation voltage AC50Hz/DC Power consumption AC/DC Triggering delay / release time
Standard
AgNi 2500VA/...250W 30A(20ms) 20x106/ 5x105 0,8...1,2UN 2,2VA/1,3W 16/8ms 24, 48, 115, 230 X / AC ..... V
AgNi+0,2 z Au 1200VA/...150W 15A(20ms) 20x106/ 2x105 0,8...1,2UN 2,2VA/1,3W 16/8ms 24, 48, 115, 230 X / AC ..... V
AC
50/60Hz C2-A20
C2-T21
Standard
DC
10%
12, 24, 48, 110, 125, 220 C2-A20 / DC ..... V 12, 24, 48, 110, 125, 220 C2-A20D X / DC ..... V Option X = with
12, 24, 48, 110, 125, 220 C2-T21 / DC ..... V 12, 24, 48, 110, 125, 220 C2-T21D X / DC ..... V
D, DX
= Type X (option)
DC
10%
5
22
4
12
3
14
EC-8
10 A 400 V
02
62
Clip S3-C
Ordering example Relay C2-A20X/AC230V Socket EC-8 Retaining clip S3-C (option)
A2 21 11 A1
38
22
22
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
AC 230 V A
WH: 35 x 35
DC 24 V D
AC 230 V A
DC 24 V D
58
C3-A30
3-pole Miniature Industrial Relay according to IEC 67-1
lockable manual operation mechanical flag indicator 2500V 2500V Test voltage: Tamb. operation/storage: -40..+60/ - 40..+85 C
SEISMIC
APPROV
ED
C3-T31
Relay like .. A30, but with twin contacts 6A
The control relay with highest switching reliablility for control and signal circuits ranging from 5mA 5V.
C3-T32
Relay like .. T31, but with 10 gold plated contacts
The twin contact relay with highest switching reliability for signal circuits ranging from 1mA 5V. Recommend. upto 0,2A 30V.
C3-R20
Remanence Relay 10 A with AC or DC coil
A1(2)=ON; A3(6)=OFF. Minim. triggering time 50ms, permanent triggering admissible. Without option X.
and others:
www.comat.ch
Connection No. on socket
MAX MIN
10 A 250 V A
10mA 10V 9 8 7 5 3 4 34 32 24 22 14 12
z
6 A 250 V A
5mA 5V 9 8 7 5 3 4 34 32 24 22 14 12
z
6 A 250 V A
1mA 5V 9 8 7 5 3 4 34 32 24 22 14 12
z
10 A 250 V A
10mA 10V 9 8 24 22
z
3 4 14 12
A2 31 10 1 1
)
21 1 1 A1 6 1 2
A2 31 10 1 1
21 1 1 A1 6 1 2
A2 31 10 1 1
21 1 1 A1 6 1 2
OFF
A2 21 A3 1 1 A1 10 1 1 6 1 2 AgNi 2500VA/...250W 30A(20ms) 20x106/ 3x105 0,8...1,2UN ON/OFF 1,5/0,5 VA//W 16/10ms ( >50ms) 24, 48, 115, 230 C3-R20 / AC ..... V 12, 24, 48, 110, 125 C3-R20 / DC ..... V
ON
Contact material Switching load AC1/DC1 Peak inrush power Switching cycles mech./electr.(AC1) Operation voltage AC50Hz/DC Power consumption AC/DC Triggering delay / release time
Standard
AgNi 2500VA/...250W 30A(20ms) 20x106/ 5x105 0,8...1,2UN 2,2VA/1,3W 16/8ms 24, 48, 115, 230 X / AC ..... V
AgNi+0,2 z Au 1200VA/...150W 15A(20ms) 20x106/ 2x105 0,8...1,2UN 2,2VA/1,3W 16/8ms 24, 48, 115, 230 X / AC ..... V
AgNi+10 z Au 1200VA/...150W 15A(20ms) 20x106/ 2x105 0,8...1,2UN 2,2VA/1,3W 16/8ms 24, 48, 115, 230 X / AC ..... V
AC
50/60Hz C3-A30
C3-T31
C3-T32
Standard
DC
10%
12, 24, 48, 110, 125, 220 C3-A30 / DC ..... V 12, 24, 48, 110, 125, 220 C3-A30D X / DC ..... V Option X = with Types C3-A30 comply to IEE 323 and IEE 344. (seismic qualified)
12, 24, 48, 110, 125, 220 C3-T31 / DC ..... V 12, 24, 48, 110, 125, 220 C3-T31D X / DC ..... V
12, 24, 48, 110, 125, 220 C3-T32 / DC ..... V 12, 24, 48, 110, 125, 220 C3-T32D X / DC ..... V
D, DX
= Type X (option)
DC
10%
9
10A 250V A
8
32
7
24
5
22
3
14
4
12
SWISS
7 8 9
5 3
EC-11
04
75
10 A 400 V
10
2
11 1
10A 400V A
Clip S3-C
C-A2
C11A
30
34
02
9
34
8
32
7
24
5
22
3
14
4
12
CONNECTOR
C-A2
SD -1W
A2
31
21
1 1
A1
A2
31
21
11
A1
10
1 1
10
11
32
Ordering example
Clip S3-C
38
20
38
22
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
23
KAT 2008
Industrial Relays
C3 Standard
1 1
Power Relay
Control Relay
Signal Relay
10 Au
Remanence Relay
AC 230 V A
WH: 35 x 35 50
C4 -A40
4-pole Industrial Relay with faston pins
lockable manual operation mechanical flag indicator Test voltage: 2500V 2500V Tamb. operation/storage: -40..+60/ - 40..+85 C
and others:
www.comat.ch
Connection No. on socket
MAX MIN
10 A 250 V A
10mA 10V 1 1 10 8 7 5 4 44 34 24 42 32 2 1 14 12
z
22
+
A1 21 1 1 6 13 3 41 31 12 14 9
)
Contact material Switching load AC1/DC1 Peak inrush power Switching cycles mech./electr.(AC1) Operation voltage AC50Hz/DC Power consumption AC/DC Triggering delay / Release time
Standard
AgNi 2000VA/...250W 30A(20ms) 20x106/ 6x105 0,8...1,2UN 2,4VA/1,4W 20/8ms 24, 48, 115, 230 C4-A40 X / AC ..... V 12, 24, 48, 110, 125, 220 C4-A40 / DC ..... V 12, 24, 48, 110, 125, 220 C4-A40D X / DC ..... V Option X = with
AC
50/60Hz
Standard
DC
10%
D, DX
= Type X (option)
DC
10%
Socket CS-14
11 44 8 34 5 24 2 14 10 42 7 32 4 22 1 12
10 11 9 12 14
7 8
4 5
6 3 13 CS-14
92
14 A2
13 A1
Clip S3-CMG
12 41 9 31 6 21 3 11
38
28
50
24
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
C5 Standard
16 A 400 V A
10 A @ 220 V D
AC 230 V A
WH: 35 x 35
DC 24 V D
50
C5 -A30
3-pole Industrial Relay with faston pins
lockable manual operation mechanical flag indicator Test voltage: 4000V 4000V Tamb. operation/storage: -40..+60/ - 40..+85 C
C5 - M10
Highpower Relay, in particular for DC loads upto 10 A 220 V D (DC1)
With 2 contacts in seires and a blow magnet for safe arc extinguishing.
and others:
www.comat.ch
Connection No. on socket
MAX MIN
16 A 500 V A / 6 A AC15
10mA 10V 6 3 5 2 34 24 32 4 1 14 12
z
16 A 500 V A / 6 A AC15
10mA 10V 6 13 4 14
S N
22
+
A2 B A
+
A1
A1 1 1 7 A
31 21 9 B 8
Contact material Switching load AC1/DC1 Peak inrush power Switching cycles mech./electr.(AC1) Operation voltage AC50Hz/DC Power consumption AC/DC Triggering delay / Release time
Standard
AgNi 4000VA/...400W 40A(20ms) 20x106/ 3x105 0,8...1,2UN 2,4VA/1,4W 20/10ms 24, 48, 115, 230, 400*) C5-A30 X / AC ..... V 12, 24, 48, 110, 125, 220 C5-A30 / DC ..... V 12, 24, 48, 110, 125, 220 C5-A30D X / DC ..... V Option X = with
AgNi 4000VA/...880W 40A(20ms) 20x106/ 3x105 0,8...1,2UN 2,4VA/1,3W 20/10ms 24, 48, 115, 230, 400*) C5-M10 X / AC ..... V 12, 24, 48, 110, 125, 220 C5-M10 / DC ..... V 12, 24, 48, 110, 125, 220 C5-M10D X / DC ..... V
AC
50/60Hz
Standard
DC
10%
D, DX
= Type X (option)
DC
10%
Socket CS-15
6 34 3 32 5 24 2 22
CS-15
4 14 1 12
B A2 9 31 8 21
A A1 7 11
80
Clip S3-CMG
38
3,5
26,5
50
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
25
KAT 2008
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
26
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Industrial Relays
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
27
KAT 2008
Industrial Relays
Power Relay
Control Relay
THE UN
LOCK LOCK
IN
TIBLE C U R T S DE
ONES
12345
WH: 35 x 35
A1 2 7N A2
RELAY
12345
10 A 400 V AC1 Ag Ni 24 22 14 12 6 5 3 4 8 21 1 11 C21A 5
RELAY A1 2+ 7 A 2 ..D ..L
...L
51
C21
2-pole Industrial Relay according to IEC 67-1
lockable manual operation mechanical flag indicator Test voltage: 2500V 1500V Tamb. operation/storage: -40..+70/ - 40..+85 C
C22
Relay like .. C21, but with twin contacts 6A
The control relay with highest switching reliablility for control and signal circuits ranging from 1mA 5V.
and others:
www.comat.ch
Connection No. on socket
MAX MIN
6A 250V A
1mA 5V 6 5 4 3 24 22 12 14
z
+
A2 21 7 8
)
+
A2 21 7 8 11 A1 1 2
11 A1 1 2
Contact material Switching power AC1/ DC1 Peak inrush power Switching cycles mech./electr. (AC1) Operation voltage AC 50 Hz / DC Power consumption Triggering delay / release time
Standard
Ag (AgCuNi) 2500VA/...300W 40A(20ms) 100x106/ 7x105 0,8...1,2/0,8...1,25UN 2,5VA/1,2W 15/ d 8, a15ms 24, 48, 115, 230 L / AC ..... V
Ag (AgCuNi) 1500VA/...200W 15A(20ms) 100x106/ 1,5x105 0,8...1,2/0,8...1,25UN 2,5VA/1,2W 15/ d 8, a15ms 24, 48, 115, 230 L / AC ..... V
AC
50/60Hz C21
C22
Standard
DC
10%
12, 24, 48, 110, 220 C21 / DC ..... V 12, 24, 48, 110, 220 C21D L / DC ..... V Option L = with
12, 24, 48, 110, 220 C22 / DC ..... V 12, 24, 48, 110, 220 C22D L / DC ..... V
D, DL
= Type L (option)
DC
10%
5
22
4
12
3
14
EC-8
10 A 400 V
02
62
Clip HF-32
Ordering example Relay C21/AC230V Socket EC-8 Retaining clip HF-32 (option)
A2 21 11 A1
38
22
28
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
THE UN
LOCK LOCK
12345
WH: 35 x 35
A1 2 10 N A2
RELAY
12345
10 A 400 V AC1 Ag Ni 34 32 24 22 14 12 9 8 7 5 3 4 11 31 6 21 1 11 C31A 5
RELAY A1 2+ 10 A 2 ..D ..L
6 A 250 V AC1 Ag Ni 34 32 24 22 14 12 9 8 7 5 3 4 11 31 6 21 1 11
...L
51
C32/DC24V D 480
939
C32D5
C31
3-pole Industrial Relay according to IEC 67-1
lockable manual operation mechanical flag indicator Test voltage: 2500V 1500V Tamb. operation/storage: -40..+70/ - 40..+85 C
C32
Relay like .. C31, but with twin contacts 6A
The control relay with highest switching reliablility for control and signal circuits ranging from 1mA 5V.
and others:
www.comat.ch
Connection No. on socket
MAX MIN
6A 250V A
1mA 5V 9 8 7 5 3 4 34 32 24 22 14 12
z
A2 31 10 1 1
)
21 1 1 A1 6 1 2
A2 31 10 1 1
21 1 1 A1 6 1 2
Contact material Switching power AC1/ DC1 Peak inrush power Switching cycles mech./electr. (AC1) Operation voltage AC 50 Hz / DC Power consumption Triggering delay / release time
Standard
Ag (AgCuNi) 2500VA/...300W 40A(20ms) 100x106/ 7x105 0,8...1,2/0,8...1,25UN 2,5VA/1,2W 15/ d 8, a15ms 24, 48, 115, 230 L / AC ..... V
Ag (AgCuNi) 1500VA/...200W 15A(20ms) 100x106/ 1,5x105 0,8...1,2/0,8...1,25UN 2,5VA/1,2W 15/ d 8, a15ms 24, 48, 115, 230 L / AC ..... V
AC
50/60Hz C31
C32
Standard
DC
10%
12, 24, 48, 110, 220 C31 L / DC ..... V 12, 24, 48, 110, 220 C31D L / DC ..... V Option L = with
12, 24, 48, 110, 220 C32 / DC ..... V 12, 24, 36, 48, 110, 220 C32D L / DC ..... V
D, DL
= Type L (option)
DC
10%
Railway D/R
DC
10%
The railway-relays C31D/R DC comply to fire protection standards according NFF 16101/2 and ISO 9125/2.
8
32
7
24
5
22
3
14
4
12
10A 250V A
SWISS
7 8 9
5 3
EC-11
04
75
10 A 400 V
10
2
11 1
10A 400V A
Clip HF-32
C-A2
C11A
30
7
24
5
22
3
14
4
12
34
02
CONNECTOR
C-A2
SD -1W
A2
31
21
1 1
A1
A2
31
21
11
A1
10
1 1
10
11
32
Ordering example
Clip HF-32
38
20
38
22
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
29
KAT 2008
Industrial Relays
1 1
Power Relay
Control Relay
IN
CTIBLE D E ST R U
ONES
1 1
Power Relay 2x
Control Relay 2x
8 11
7 6
R2 R1
N 10
3 2 1
8 1 1
7 6
R2 R1
N 10
3 2 1
WH: 35 x 35
10 A 250 V A
5 A 250 V A
51
04
relay
04
10
11+
6+
2+
C 33 / AC 230 V A
relay
C 34 / AC 230 V A
relay
C39 / DC 24 V D
C33
2- and 3-channel Industrial Relays according to IEC 67-1
Single or twin contacts Front contact inspection window or LED display (C39) Test voltage: 2000V 2000V Tamb. operation/storage: -25..+60/ - 40..+85 C
C34
Relay like C33, but with twin contacts 5 A
The control relay with highest switching reliablility for control and signal circuits ranging from 1mA 6V. Width per channel: 17,5mm.
C39
Triple-channel Twin Contact Relay 5 A
with 3x1 No contact it is ideal for interface applications ranging from 1mA 100mV. LED display for each channel. Width per channel: 1 1,7mm.
and others:
www.comat.ch
Connection No. on socket
MAX MIN
10 A 250 V A
10mA12V 9 8 75 3 4 1 14 1 12
1
5 A 250 V A
1mA 6V 9 8 75 3 4 1 14 1 12
1
5 A 250 V A
1mA100mV 9 8 7 5 3 4
2 14 2 12
2 14 2 12
3 14 3 13 2 14 2 13 1 14 1 13
A2 21 1 2 A1 10 1 1 6
)
11 1 1
A1 2
A2 21 1 2 A1 10 1 1 6
11 1 1
A1 2
A2 3 A1 10 1 1
A1 1 A1 6 1 2
Contact material Switching power AC1/ DC1 Peak inrush power Switching cycles mech./electr. (AC1) Operation voltage AC 50 Hz / DC Power consumption per channel Triggering delay / release time
AgCdO 2500VA/...300W 40A(16ms) 20x106 / 105 0,8...1,15UN 1,3VA/0,55W 15/25ms 24, 48, 115, 230 C33 / AC ..... V 12, 24, 48, 110 C33 / DC ..... V
AgNi 1250VA/...200W 20A(16ms) 20x106 / 105 0,8...1,15UN 1,3VA/0,55W 15/25ms 24, 48, 115, 230 C34 / AC ..... V 12, 24, 48, 110 C34 / DC ..... V
AC
50/60Hz
DC
C39
10%
8
32
7
24
5
22
3
14
4
12
05
5 A 250 V A
3
14
R3 8
R2 5
R1 4
7
24
5
22
4
12
10A 250V A
SWISS
7 8 9
5 3
EC-11
04
75
10 A 400 V
10
2
11 1
10A 400V A
Clip HF-32
C-A2
C11A
30
34
02
CONNECTOR
C-A2
SD -1W
A2
31
21
1 1
A1
A2
31
21
11
A1
10
1 1
10
11
32
Ordering example
Clip HF-32
38
20
38
22
30
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Industrial Relays
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
On delay
www.comat.ch
S R
Off delay
t
Pulse shaping
S R
Blinker functions S R
S (pulse or continuous contact) R on for t S no influence on R and t
Pulse shaping
t
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
t t t
S R
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
31
KAT 2008
Industrial Relays
1 1
0,2 s - 30 min
0,2-3s/min 2-30s/min
On delay
E
CT2 (8-pin) CT3 (11-pin)
RELAY
413 58 6 19 4 1 3 5 6 7 81
t
S R on with delay S OFF R off
S R
RELAY
Off delay
A
41 3 567 8 11 9 413 586 CT2 7 A2 7 Socket 2 A1 2 S B1 CT3 10 A2 10 < A1 2 S B1
S R
Socket
www.comat.ch
MAX
10A 250 V A
UC180-265V UC90-265V UC90-150V DC9,5-18V UC20-65V
Order no.
Pulse shaping
Function Triggering
2 = 8 - pole 3 =11- pole CT .. - E 30 / ... CT .. - A 30 / ... W CT .. - K 30 / ... CT.. -W30 / ... CT .. - B 30 / ...
S R
E
A2 A1 A2 B1 A1 A2 B1 A1 +
S S S
H U M U M H H
L L L L L
S S
A K
UC
AC/DC
DC
10%
t t t
S R
ON
OFF
Industrial relay
CT2 / 3
Socket
EC-8
02
EC-11
5
22
6
24
4
12
3
14
9
34
8
32
7
24
5
22
3
14
4
12
02
Ordering example Time cubes CT2-E30/H Socket EC-8 or CS-8 Relay C2-... Time cubes CT3-E30/H Sockel EC-11 oder C11A Relay C3-...
S3-CT
For Relay C2...C3
EC-8
10 A 400 V
EC-11
10 A 400 V
Clip
62
HF-33
For Relay* C21...C39
A2
21
11
A1
A2
31
21
11
A1
10
11
58 ( 51* )
25
22
38
38
32
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
32
30
10
10
R-module
2
15k 1N4007 1000 V 1A
1
A1
Module section
A2 12
RDL1 / DC 48V D
Relay coil
/
RL1/ UC12-24 V u
10 A2
6k8
Illuminated displays
2 A1
see RL1/UC...V
A1
With additional diode output (12), e.g. for collective alarm messages.
Suppressing units
see RC1/UC...V
2 A1
2 12 A1
2 12 A1
RC1/ UC 12- 48 V u
10 A2
47E 0,47 F
2 A1
RCL1/ UC 24 V u
10 A2
47E 0,47F 10k
RDL1/ DC12-24 V d
2 A1 10 A2
6k8
RDL2 / DC12-24 V d
2 A1 10 A2
6k8
RDL3 / DC12-24 V d
10 A2
6k8
2 A1
2 12 A1
2 12 A1
RCL1/ UC 48 V u
10 A2
47E 0,47F 22k
RDL1/ DC 48 V d
2 A1 10 A2
15k
2 A1
/
N L N( )
(+) L
+ +
8
32
7
24
5
22
3
14
9
34
8
32
7
24
5
22
3
14
4
12
12345
10 A 250 V A
12345
10 A 250 V A
SWISS
7 8 9
SWISS
5 4 3
04
7 8 9
5 4 3
Clip S3-C 75 Plugged-in neutral conductor connector C-A2 (C11A standard delivery). Module section
05
10
2
11 1
10 A 400 V A
10
2
11 1
C11A
C 12 B
10 A 400 V A
C-A2
CONNECTOR
C-A2
CONNECTOR
C-A2
Ordering example
Module section Module section
A1 A2 31 21
Module RCL1/UC48V Socket C11A Relay Type C3-... Clip S3-C (option)
A2
31
21
11 1
11 B1 1 12
A1
10
11
10
11
38
38
20
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
33
KAT 2008
Industrial Relays
1 1
Plug-in coil wirings for 3-pole Industrial Relays C3, C31 and C30
Relay modules indicate the relays switch mode and /or help limiting cutoff voltage peaks in the control circuit by means of a diode or a RC module. The types R..2/3 are equipped with additional diodes for signal or OR-circuits. For parallel or serial connections the relay modules are simply plugged info the sockets C11A or C12B.
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
34
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Industrial Relays
DIN Relays
Stepping switch
C103.06
C203.06
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
35
KAT 2008
Industrial Relays
Control Relay 2x / 3x
Signal Relay
T BASE
13 mm
CR16 AX CR16 CX
DIN Interface Relais
No external coil wiring required Mounting on DIN rail TS 35 Test voltage: 2000V 2000V
CR 23 A
CR 33 A
CR11C
Signal Relay
13mm series,1 channel, 2 x CO Au twin contact. Recommended max. load 200mA/24V, resistiv. Integrated LED and coil wiring.
CRS1C
Stepping Relay
13mm series, 1 x CO suitable for permanent energizing. Supply loss safe. Integrated LED and coil wiring.
Power Relay
13mm series, 1 x NO resp. 1 x CO up to 6A. Integrated LED and coil wiring.
and others:
www.comat.ch
MAX MIN
6 A 250 V A
10mA 12V
13 14 14 12 11 12
3 A 250 V A
100 A 100mV
1
1A 250 V A
100 A 10mV
13 3 14 1 14 2 14
12 14
11
6 A 250 V A
10 mA 12 V
14 12 11 12
13 14
13 14
22 24
21
Connection
(DC-version)
(DC-version)
+
A2 A1
+
A2 A1
+
1 A1
+
2 A1
+
1 A1
+
11 A2 21 + A1
(DC-version)
A2
A2
2 A1 A2 3 A1
+
A2 A1
01
Contact material Switching load AC1/DC1 Peak inrush power Switching cycles mech./electr.(AC1) Operation voltage AC50Hz/DC Power consumption AC/DC Triggering delay / release time
AgNi 1500VA/...180W 15A/20ms 30x10 6 / 1,5x10 5 AC 20%+10%/DC 15% 2,5VA/0,25W 10ms /20ms 24 CR16AX CR16CX / DC..... V 230 CR16AX CR16CX / AC ..... V
Ag-alloy/Au3 m 750VA/...90W 20x10 6 / 1,5x10 5 /DC 20% 0,25W 6ms /4ms 24 CR 23A CR33A / DC..... V
Ag-alloy/Au5 m 65VA/...30W 200x10 6 / 10 5 /DC 25% 0,25W 3ms /4ms 24 CR11C / DC ..... V
DC
10%
AC
50/60Hz
BS13-K BS13-G
(incl. paper)
13
44
11
90
36
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
45
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
2x
Control Relays 2x 3x
Signal Relays 2x
Industrial Relays
C203.04 C301.04
Control Relay
High efficient 2/3 channel control relay DIN series 17,5mm, each 1 x CO resp. 1 x NO twin contact. Multi-layer contact up to 5A. Very versatile in application. Integrated LED and coil wiring.
C103.06 C203.06
Signal Relay
DIN series 17,5mm, 1/2 channel each 1 x CO Au twin contact. Recommended max. load 200mA/24V. Integrated LED and coil wiring.
Power Relay
DIN series 17,5mm, 1/2 channels with 1/2 x CO contacts up to 6A. Integrated LED and coil wiring.
and others:
www.comat.ch
MAX MIN
6 A 250 V A
10 mA 24 V A1 A2 A1 A2 A1 A1 A2
5 A 250 V A
1mA 0,1V A1 A1 A2 A2 A2 A2
2 A 125 V A
10 A 10mV A1 A2 A1 A1 A2
1 2 Connection 1
z = contact opening < 3mm
1 2 1
11 12 14
A1 A1 A1
1 2 1
11 12 14
1 2
11 12 14
11 12 14
14 14 14
2
11 12 14
Data at Tamb. =20 C
2
11 12 14 13 13 13 11 12 14
2
11 12 14
21 22 24
11 12 14
Contact material Switching load AC1/DC1 Peak inrush power Switching cycles mech./electr.(AC1) Operation voltage AC50Hz/DC Power consumption AC/DC Triggering delay / release time
AgNi 1500VA/...300W 15A/20ms 20 x10 6 / 10 5 0,85...1,15UN 0,6W 1,7W 10ms /10ms C103.01 C133.01 2x 0,6W 12 C203.01 / DC ..... V 110-127, 220-240 C203.01 / AC ..... V 24, 36, 48 C203.01 / UC ..... V
Ag-alloy 1250VA/...150W 10A /20ms 50 x10 6 / 1,5 x10 5 0,8...1,2UN 0,25W (per channel) 6ms /30ms 12-15, 24, 48 C203.04 C301.04 / DC ..... V
Ag-alloy/Au3 m 250VA/...60W 100 x10 6 / 10 5 0,8...1,2UN 0,25W (per channel) 10ms /20ms C103.06 12 C203.06 / DC ..... V 110-127, 220-240 C203.06 / AC ..... V 24, 36, 48 C203.06 / UC ..... V
DC
10%
AC
50/60Hz C103.01 C133.01
C103.06
UC
/
C103.01
C133.01
C103.06
C103
LABEL
Ordering example
C103
Relay C301.04/DC24V
4,2
2,5
75
17,5
64
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
37
KAT 2008
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
38
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Industrial Relays
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
39
KAT 2008
Industrial Relays
C35...C38 Solid-State
1 1
DC Solid-State Relay 1x
DC Solid-State Relay 2x
3 4 0,8 A 265 V U
K
9 0,8 A 265 V A
DC10-32 V d
+ RL 7 5 3
DC10-32 V d + RL 9 PNP
K
RL 7 5 3 R1
WH: 35 x 35
R2
R1
PNP
5A
2A
R2
51
05
C35
1- and 2-channel Solid-state Relay according IEC67-1
LED display for each channel operation voltage range 0,8..1,1UN galvanically decoupled control (2kV) Tamb. operation/storage: -25..+60/ - 40..+85 C
C36
AC Solid-State Relay double-channel
Triac output, crossover switching. Built-in RC wiring protection. Especially for bulb-loads and high switching frequencies. Minimum load: 30mA
C37
DC Solid-State single-channel
Bounce-free and non wearing for DC loads (inductive/ capacitive). Short-circuit/overload proof. No external wiring protection required.
C38
DC Solid-State Relay double-channel
Construction, characteristics and application like C37, but double-channel. 2A constant current per channel.
and others:
www.comat.ch
MAX MIN
5 A 10 ... 32 V D
1mA 5V
2 A 10 ... 32 V D
1mA 5V
+
Connection No. on socket Designation according to DIN/EN 5001 1
RL
4
L
2
RL
RL
RL
RL 7 5 3
1 14
+
1
+
7 5 3
14
13
9 14
2
3 14
1
4 13
+ 13 14
2kV
9 14
2kV
+ 13
1
2kV
2kV
2kV
+ A1
2
+
1+2
+
A2 10
2
+
1 A1
A2 10
A1 6
1 A1 1 A1
A2
10
A1
2
A1 A2 6 1
Peak inrush power Voltage drop Residual current Short-circuit proof K Control voltage Frequency range Control current Triggering delay Off delay
1,5A /1s 3V 100 A 12A /200 s 110-240V 50..60Hz 35mA 20ms 80ms 24-48V 40..400Hz 20mA 20ms 80ms
8A /20ms 1,5V 3mA 110-240V 50..60Hz 17mA 30ms 40ms 24V 50..60Hz 12mA 30ms 80ms
15A /1s 0,2V 100 A 70A /150 s 110-240V 40..60Hz 5mA 30ms 30ms 24-48V 40..400Hz 6mA 20ms 30ms
15A /1s 0,2V 100 A 70A /150 s 110-240V 40..60Hz 5mA 30ms 30ms 24-48V 40..400Hz 6mA 20ms 30ms
AC
50/60Hz
110-240 C36 / AC ..... V 24 C36 / UC ..... V 24-48, 110-240 C37 / UC ..... V 24-48, 110-240 C38 / UC ..... V
UC
/
8
32
7
24
5
22
3
14
4
12
7
24
5
22
3
14
4
12
10A 250V A
SWISS
7 8 9
5 3
EC-11
04
75
10 A 400 V
10
2
11 1
10A 400V A
Clip HF-32
C-A2
C11A
30
34
02
CONNECTOR
C-A2
SD -1W
A2
31
21
1 1
A1
A2
31
21
11
A1
10
1 1
10
11
32
Ordering example
Clip HF-32
38
20
38
22
40
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
05
Solid-State
10 N
Solid-State
10 N
04
04
Solid-State
10
2+
Solid-State
10
6+
2+
01
30 mA ..1,5A AC 20-265 V A
30 mA ..0,8 A AC 20-265 V A
3
L1
4
L1
3
L1
01
TATE SOLID - S
1
Case
KA108 /DC12-24 V D
relay
L1
2 kV
2 kV
2 kV
+
8 7 8
+
6 5
+
7
35,5
+
8
01
Case
relay
KA115 / UC12- 24 V U
Case
relay
KA 208 / DC12- 24 V D
KA108
AC Solid-State Relay
1- and 2-channel crossover switching each channel indicated by LED Triggering/Output 2kV Tamb. operation/storage: -25..+60/ - 40..+85 C
KA115
Universal AC Solid-State Relay
1-channel, 1,5A/AC240V. Triac output with RC wiring protection. Triggering galvanically isolated.
KA208
Universal AC Solid-State Relay
2-channel, 0,8A/AC240V (2x0,5A). Triac outputs RC wiring protection. Width per channel: 11mm. Triggering galvanically isolated.
and others:
www.comat.ch
Connection No. on socket
MAX MIN
0,8 A
30mA
3
20 ... 265 V A
1,5 A
30mA
3
20 ... 265 V A
0,8 A
30mA 4 14
20 ... 265 V A
14
13
14
13
2 3 13 1 14
1 13
2kV
2kV
2kV 1
2kV
+ A1 7
A2
8
+ A1 7
+
A2 8
2
+
1 A1
A1 A2 6 5
Peak inrush power Residual current Frequency range Voltage drop Control voltage Triggering OFF Switching delay Control current
20A (20ms) 3mA 50/60Hz 1,5V UC10...30Vu U A1: 6V 12ms 10mA (24V)
8A (20ms) 3mA 50/60Hz 1,5V DC10...30V d U A1: 6V 12ms 10mA (24V) KA208/DC12-24V
DC
20% KA108/DC12-24V
UC
A 40-400 Hz /
KA115/UC12-24V
10
Clip GC-T *)
2 4 6 8 1
B
22 x 65
1 3
2 4 6 8
75
3 5
5 7
R
Clip RC-G Clip GC-W *) 22 x 28
S7- P
CS-18
22,5
5,2
13,1
14,5
Ordering example Relay KA115/UC12-24V Socket CS-18 or S7-P Retaining clip RC-W (option)
21 11
22,5
22
35,5
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
41
0,6
Case
0,5 x 2
RC-G
2,2
KAT 2008
30
Industrial Relays
KA Solid-State
AC Solid-State Relay 1x
AC Solid-State Relay 1x
AC Solid-State Relay 2x
KD Solid-State
DC Solid-State Relay 1x
DC Solid-State Relay 2x
DC Solid-State Relay 3x
+
PNP K 2,5 / 2 x1,5 A PNP K 2,5 A
RL
RL
3
5k
1
5k
KD125 /DC12-24 V D
relay
KD 215 / DC12-24 V D
relay
RL
RL
1
5k
8 2
6 + 5 + 7 3 1
5k
8
02
+
7
Case
8
01
+
6 7
Case
relay
KD 315 / DC12- 24 V D
01
Case
35,5
KD125
AC Solid-State Relay
1- and 3-channel overload/short-circuit proof K limiting inductive voltage each channel indicated by LED Triggering/Output 2kV Tamb. operation/storage: -25..+60/-40..+85 C
KD215
Solid-State Relay like KD125, but 2-channel
2,5A/2x1,5A/DC24V. Width per channel: 11mm. With thermal overload protection and short-circuit resistent.
KD315
Solid-State Relay like KD125, but 3-channel
2,5A/3x1,5A/DC24V. Width per channel: 7,3mm. With thermal overload protection and short-circuit resistent.
and others:
www.comat.ch
Connection No. on socket
MAX MIN
2,5 A 10 ... 32 V D
1mA 5V 4 3 1 13
K
1,5 A 10 ... 32 V D
1mA 5V 4 2 14 2 13 1 13
1,5 A 10 ... 32 V D
1mA 5V 4 2 14 2 13 3 13 1 13
+ 14
2
5k
1
5k
2
2
1 A1
3
5k
2
1
5k
3
A1 7
A2 8
A1 6
A2 8
A1 6
A1 5
1 A1
Output Current peak Residual current ON-resistance Control voltage Triggering OFF ON-OFF-switching delay Control current
1PNP (noc) 15A (20ms) <100 A 50m DC 5...18V/10...32V d U A1-2: 3V/ 6V 2,5ms 4mA (24V) 20% 6-12, 12-24 KD125 / DC ..... V
2x1PNP (noc) 15A (20ms) <100 A 50m DC 10...32V d U A1-2: 3V/ 6V 2,5ms 4mA (24V) KD215/DC12-24V
3x1PNP (noc) 15A (20ms) <100 A 50m DC 10...32V d U A1-2: 3V/ 6V 2,5ms 4mA (24V) KD315/DC12-24V
DC
10
Clip GC-T *)
2 4 6 8 1
B
22 x 65
1 3
2 4 6 8
75
3 5
5 7
R
Clip RC-G Clip GC-W *) 22 x 28
S7- P
CS-18
22,5
5,2
13,1
14,5
Ordering example Relay KD215/DC12-24V Socket CS-18 or S7-P Retaining clip RC-G (option)
21 11
22,5
22
35,5
42
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
0,6
Case
0,5 x 2
RC-G
2,2
30
3A,12-24V D
2
Q2 Q3
3
Q1
WH: 22 x 65
E1
+
7
1
Case
01
35,5
relay
KDM3-24/DC12-24V D
KDM 3-24
Motor Control Relay
For controlling and braking of DC Motors Tamb. operation/storage: -25..+60/-40..+85 C
Interface Module
for PLCs and control systems with one PNP power contact and one NPN brake contact. For DC motor controls with brake function. The contacts are overload- and short circuit protected.
and others:
www.comat.ch
Connection No. on socket
MAX MIN
3 A (5A) 24V d
10mA 10V 4 2 3 1 Q 2 Q 3 Q1
K
+
4 8 2 6 3 1 7
S
M
K
8
Data at Tamb. =20 C
E1 + 7
3A,12-24V D
Contact type Switching current/voltage Switching power DC1 Peak inrush current Contact resistance Leakage current Trigg. delay/release time Operation voltage active Power consumption Pmax
Power contact FET PNP 3A (5A) / 10-32V ...100W 20A / 1s <100m <100 A <1ms 9-28V 400mW / DC24V 20% KDM3-24/DC12-24V
Break contact FET NPN 3A (5A) / 10-32V ...100W 20A / 1s <100m <100 A <1ms
DC
Clip GC-T *)
2 4 6 1
1 3
2 4 6 8
4
3 5
0,5 x 2
75
5 7
65
S7- P
Ordering example Interface module KD215/DC12-24V Socket CS-18 or S7-P Retaining clip RC-G (option)
CS-18
22,5
5,2
13,1
14,5
Clip GC-W *)
21 11
22,5
22
35,5
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
43
0,6
RC-G
2,2
KAT 2008
30
Industrial Relays
KDM3-24 Solid-State
1x co
+ Q1 Q2
01
+
3 A, 12-24 V D K
Q1
Q2
(+)
()
A1
A2
A1 A2
KDW 3-24
Solid-State AC/DC Relay
Change over PNP for all inductive loads Mounting onto DIN rail TS 35. Test voltage: 2kV Tamb. operation/storage: -25..+60/-40..+85 C
Interface Module
Solidstate relay with 1x CO output PNP for 3A, 24VD. The contacts are overload- and short circuit protected K . LED status display. Galvanical isolated output. This relay is specially recommended as an alternative to electromechanical relays for applications with high switching cycles. Bounce-free switching.
and others:
www.comat.ch
MAX MIN
3 A (5A) 24V d
10mA 10V
+
K
Q1
Q2
+
K
Connection
Q1 Q2
R L2
R L1
A1 A2
A1
Data at Tamp = 20 C
A2
Contact type Switching current / voltage Switching power DC1 Peak inrush current Contact resistance Leakage current Trigg. delay / release time Operation voltage active Power consumption Pmax
FET PNP 3A (5A) / 10-32V ...72W (160W) 20A / 20ms <50m <100 A <5ms 18-255V AC/DC 3-8mA / <400mW KDW3-24/UC24-240V
UC
50/60 Hz /
LABEL
2,5
TS 35
75
17,5
64
44
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
1
I -0 = 2 kV
CTV11
1- and 3-channel DC Solid-State Relay
for high switching cycles galvanical separation 2kV mounting onto DIN rail TS 35 Tamb. operation/storage: -25..+60/-40..+85 C
C301.08
Compact 3-channel Solid-State Relay
for the switching of DC loads up to 2A/DC 24 V. Outputs, galvanically isolated. Overload and short-circuit proof. Specially suitable for high switching cycles. (PLC and ancillery)
C311.08
Compact 3-channel Solid-State Relay
like C301.08 but without galvanic isolation of outputs.
Solid-State Relay
with galvanically isolated triggering input to control and switch DC loads. 1 channel 250mA/DC5-60V
and others:
www.comat.ch
MAX MIN
250 mA 5 ... 60 VD
1mA 10V
12-65V 4-18V
2 A 10 ... 30 VD
1mA 10V
2 A 10 ... 30 VD
1mA 10V
+ EH
+ EL
A2
A2
A2
A2
+ 1A1 + 2 A1 + 3 A1
2kV
+ 1A1 + 2 A1 + 3 A1
1 2 3
5k
Connection
PNP K
250mA
3
2kV
+
5-65V
O
RL
1O
2O
3O
1O
2O
3O
Admissible peak current Residual current Voltage drop / ON-rheostat Control voltage (U nom) Ripple Triggering OUT Control current on A1 Swtiching delay
0,75A (20ms) <100 zA <1V EH 15-60V / EL 5-15V 10% @10V EL 2,5V / EH 5V Typ. 10mA ON 200 zs / OFF 400 zs
15A (20ms) <100 zA 50m DC24V (10...30V) D 10% @10V U A1: 6V 4mA @ 24V 2,5ms C301.08/DC24V
15A (20ms) <100 zA 50m DC24V (10...30V) D 10% @10V UA1: 6V 4mA @ 24V 2,5ms C311.08/DC24V
DC
10% CTV11/DC5-60V
CTV11
LABEL
75
2s
t on t off
Ordering example Solid-state relay C301.08/DC24V
4,2 2,5
Steady load
CTV11
17,5 5 64
10
50
t on 100 (%)
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
45
KAT 2008
Industrial Relays
DIN
Pulse Shaper
2x
CPF11
Pulse shaper with timing function
To stretch respective to limit control pulses. Suitable for NAMUR sensors respective to analyze fast sequences with high revolutions and short pulses. Tamb. operation/storage: -25..+60/-40..+85 C
CPF22
Double Channel Pulse Shaper
Input /output galvanically isolated 4kV Input and output times separately settable 2 functions to choose LED output display for each channel Settable functions:
K L A
Settable times: input pulse output pulse
K A
Settable times: input pulse output pulse
1/ 5 ms
and others:
5 600 ms
www.comat.ch
MAX MIN
2 A 15... 32 V d
2mA 10V
15 32V D
150 mA 45 V d
2mA 10V
NAMUR sensor
1928V
Three-wire sensor
1532V
+ +
PNP
15 32V D 1S 2S
E1 E2
4K7 4kV
+
S NAMUR
E2
+
S PNP E1
3K3
11K 5K6
E1 CPF
150mA
PNP
2O
CPF
FD
+
+
10 45V D
1O
0,8A
1RL
2RL
RL
DC
10% CPF11/DC24V CPF22/DC24V
Pulse shaping
L
S R
Off delay
S R
S R
CPF11
CPF22
TS 35
75
8 5 64 10
17,5
46
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Industrial Relays
Miniature Contactors
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
&
&
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
47
KAT 2008
Industrial Relays
Miniature Contactor
RC Modules
1 L1
13
3 L2
23
5 L3
33
13 NO
A1
53 NO 63 NO 73 NO 83 NO 53 NO 63 NO 71NC 81NC 51NC 61NC 71NC 81NC
43
E0414 01
SOC-6-1a/AC230V
ON 1
20A 400Va
50/60 Hz
01 01 01
SS-1BM / UC12-48 VU
O
5
10A 400Va
13
A1
54 NO 64 NO 74 NO
SU-440M
SU-422M
SU-404M
84 NO
54 NO
64 NO
72 NC
82 NC
52 NC
62 NC
72 NC
82 NC
0 47 150
2 T1
14
4 T2
24
44 34 6 T3 14 NO
A2
SOC-6 -1a
3-/4-pole Miniature Contactor
All contacts with twin interruption Manual operation Mechanical status display 4000V 4000V Test voltage: Tamb. operation/ storage: -20..+60/ - 40..+85 C
SU-440M
Additional auxiliary contact block
4 NO contacts. Snap-on to miniature contactor SOC-6. Expands the SOC-6 up to a total of 8 NO contacts.
SU-422M
Additional auxiliary contact block
2 NO + 2 NC contacts. Snap-on to miniature contactor SOC-6. Expands the SOC-6 up to a total of 6 NO and 2 NC contacts.
SU-404M
Additional auxiliary contact block
4 NC contacts. Snap-on to miniature contactor SOC-6. Expands the SOC-6 up to a total of 4 NO and 4 NC contacts.
SS-1...
RC Modul
to limit overvoltage. Universal version (UC...V U) for AC and DC coils. Snap-on directly onto miniature contactor SOC-6.
and others:
www.comat.ch
Continuous terminal No.
MAX MIN
20 A // 10 A 400 V A
10mA 24V // 1mA 6V 1 3 5 13 A1+ L1 L2 L3 NO 13 23 33 43
10 A 400 V A
10mA 24V
10 A 400 V A
10mA 24V
10 A 400 V A
10mA 24V
53
NO
63
NO
73
NO
83
NO
53
NO
63
NO
71
NC
81
NC
51
NC
61
NC
71
NC
81
NC
Connection lay out (top/bottom) 14 24 34 44 T1 T2 T3 NO 2 4 6 14 A2 AgNi 11kW 400V // 4kW 400V 4kW 9A 400V // 1,9A 400V // 1,5A 400V ...300W 0,3A 220V // 0,1A 220V 90A / 70A eff 20x106 0,8...1,2UN 4,2VA/3W 20ms/15ms 24, 230 SOC-6-1a / AC ..... V 24 SOC-6-1a / DC ..... V
NO NO NO NO NO NO NC NC NC NC NC NC
A1
01
A2
54
64
74
84
54
64
72
82
52
62
72
82
Contact material Switching power AC1 Switching power AC 3/4 Switching current AC15 Switching power DC1 Switching power DC13 Making-/Breaking capacity Mechanical switching cycles Operation voltage AC 50 Hz / DC Power consumption Typical make/release time
AgNi 7kW 400V 1,9A 400V ...300W 0,3A 220V >30A 10x106
AgNi 7kW 400V 1,9A 400V ...300W 0,3A 220V >30A 10x106
AgNi 7kW 400V 1,9A 400V ...300W 0,3A 220V >30A 10x106
Current consumption: at AC24V : 8mA at DC24V : 4mA at AC230V : 12mA at DC220V: 2,5mA Release time SOC-6 with RC module 45ms
AC
50Hz
SU-440M
SU-422M
SU-404M
DC
10%
Interlocking unit
SR-6
SR-6
O
Interlock Unit
01
Arrangement
SR-6 SS-1...
TS35 45,4
13
23
33
43
SOC-6
SU-4...
50
58
SOC-6
A2
2 T1
4 T2
6 T3
14 NO
26,2
35 44
53 57
48
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
1
SOC-2-1a /AC230V A
13
1
50Hz
3
SOC-2-1a /AC230V A
13
SOC-2-1a/AC230VA
AC1 20A 400V/13kW AC3 2,2kW/400V AC1 20A 400V/13kW AC3 2,2kW/400V
02
IEC/EN 60947-4
A1 A2
AC1 20A 400VIEC/EN 13KW 02 60947-4 AC3 2,2kW 400V A1 EN 60947-4; IEC1095; VDE 0660 50Hz
I
50Hz
13
O A1
A2
L1 T1
L2 T2
L3 T3
RE CO MINIATU
NTACTO
14
14
A2 14
02
SOC-2-1a
3- + 1-pol. Miniature Contactor
All contacts with twin interruption Manual operation Mechanical status display Test voltage: 4000V 4000V
Installation Contactor
High power relay up to 3x20A 400V and 1 auxiliary twin contact 6A. For installation mounting with cover conform DIN 43880. The cover can be sealed. For general applications and motors up to 2,2kW. Suitable for pilot control signals.
and others:
www.comat.ch
Continuous terminal No.
MAX MIN
20 A // 6 A 400 V A
10mA 24V // 1mA 6V A1 1 3 5 13 L1 L2 L3 NO 13 23 33 43
Connection lay out (top/bottom) 14 24 34 44 T1 T2 T3 NO 2 4 6 14 A2 AgNi 13kW 400V 2,2kW 400V 20A 24V / 2A 110V 100A / 2,5ms 6A 400V 6A 24V / 0,5A 220V > 3 x 10 6 0,8 - 1,2 U N 32W 20ms /1,5 W < 20ms / < 20ms 24, 230 SOC-2-1a/AC.....V
Contact material Switching power AC1 Switching power AC3/4 Switching current DC1 Inrush current Switching current Switching current DC1 Mechanical life time Coil voltage Coil power Typical make / release time
AC
50Hz
50
Ordering example
SOC-2
4,5 35
TS35
62,5
45 50.5
1 8
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
49
KAT 2008
Contactor 20 A
2NO or 2NC or 1NO/1NC
Contactor 25 A
4NO or 4NC or 2NO/2NC
Contactor 40 A
4NO or 4NC or 2NO/2NC
Contactor 63 A
4NO or 2NO/2NC
AUX Block
2NO or 2NC or 1NO/1NC
NO NOI
SE!
TS 35
RIC 20
AC/DC Istallation Contactors No noise!
All contacts doublemake/ doublebrake Mechanical status display Test voltage: 4kV/3 Tamb. operation/storage: -20..+55/ - 30..+80 C MAX MIN
RIC 25
Contactor 25 A
Contactor with 4NO or 4NC or 2NO+2NC contacts. UC (AC/DC) versions are noise free and do not need external freewheeling circuits. No coil inrush overcurrent. Sealing cover optional.
RIC 40
Contactor 40 A
Contactor with 4NO or 4NC or 2NO+2NC contacts. UC (AC/DC) versions are noise free and do not need external freewheeling circuits. No coil inrush overcurrent. Sealing cover optional.
RIC 63
Contactor 63 A
Contactor with 4NO or 2NO+2NC contacts. UC (AC/DC) versions are noise free and do not need external freewheeling circuits. No coil inrush overcurrent. Sealing cover optional.
RIC-AUX
Auxilary
Contactblock with 2NO or 2NC or 1NO+1NC contacts. For signalling and control applications up to 6 A with crown twin contacts. For all RIC contactors.
Contactor 20 A
Contactor with 2NO or 2NC or 1NO+1NC contacts. UC (AC/DC) versions are noise free and do not need external freewheeling circuits. No coil inrush overcurrent. Sealing cover optional.
and others:
20 A 400 V A
10mA 24V 1 A1 3
25 A 400 V A
10mA 24V 1 3 A1 5 7
40 A 400 V A
10mA 24V 1 3 A1 5 7
63 A 400 V A
10mA 24V 1 3 A1 5 7
6 A 400 V A
5mA 24V 51 61
www.comat.ch
2 R1
A2 A1
R2 R3
R2
A2 A1
R4
R2
A2 A1
R4
R2
A2
R4
52
62
R1 R3
R5 R7
R1 R3
R5 R7
51 61
R2
Data at Tamb =20C
A2
R4
R2 R4
A2
R6
R8
R2 R4
A2
R6
R8 AgSnO2 63A 400V 8,5kW/230V 40kW/400V 120 1x105 0,85 - 1,1 U N 5W 20ms // 35ms 24, 230 RIC63-400/UC ..... V 24, 230 RIC63-220/UC ..... V
Contact material Switching current I TH Switching voltage Switching power AC3 Switching power AC1/AC7a Op Frequenz max. cycle/hr Electrical life cycles AC1 Coil voltage range Power consumption Operate / release time typ.
AgNi 20A 400V 1,3kW/230V 4kW/230V 600 2x105 0,85 - 1,1 U N 2,5W 20ms // 20ms 24, 230 RIC20-200/UC ..... V 24, 230 RIC20-110/UC ..... V 24, 230 RIC20-020/UC ..... V
AgNi 25A 400V 2,2kW/400V 16kW/400V 600 2x105 0,85 - 1,1 U N 3W 10ms // 50ms 24, 230 RIC25-400/UC ..... V 24, 230 RIC25-220/UC ..... V 24, 230 RIC25-040/UC ..... V
AgSnO2 40A 400V 5,5kW/400V 26kW/400V 120 1x105 0,85 - 1,1 U N 5W 20ms // 35ms 24, 230 RIC40-400/UC ..... V 24, 230 RIC40-220/UC ..... V 24, 230 RIC40-040/UC ..... V
UC
A 50/60 Hz / D
RIC-AUX20
UC
A 50/60 Hz / D
RIC-AUX11
UC
A 50/60 Hz / D
RIC20 RIC25-63
RIC-AUX02
Ordering example Installation contactor RIC25-400/UC230V Aux block RIC-AUX20 Sealing cover RIC-SEAL20
RIC20
RIC25
TS35
85
RIC-AUX
50
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
45
RIC40 RIC63
Time Cubes Multifunction Time Delay Modules Time Delay Relays Pulse Shapers Step-on Step-off Relays Power Relays Socket Accessories
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
51
KAT 2008
Delay functions
On delay
S R
Off delay
S R
S R
t1
Pulse shaping
t2
S R
t1
S t2 R
Blinker functions S R
S (pulse or continuous contact) R on for t S no influence on R and t
Pulse shaping
t t t
S R
S R
B1
t t t
S R
Pulse shaping
t
Delayed pulse
S R
B2
t t t
Repeat cycle timer
S R
t1
t2
S R
t1 t2 t1
S R
t1
t2
S R
C55,CT1: t2 t1
t1 t2 t1
Special functions
S R
Special functions
Star-delta timer
t t
-
S R
S R on/off
X1
Restart delay
t
Stop /Reset
t STOP
S R
LS
S R
S STOP interrupts t
(t-addition)
t is stopped
R on/off Test
ON
OFF
U
tA tV
S1/ S2 P (tP) R
V
tA
Start with S1 = without start-up short-out tA Start with S2 = with start-up short-out tA
S1/ S2 P (tP) R
: Pulse separation is smaller than the time tP : Pulse separation is larger than the time tP
52
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Ext. Poti
Type CT..-E 30 CT..-A 30 CT..-K 30 CT..-W 30 CT..-B 30 CT30 1) CT32 1) CT33 1) CT36 1) C81 C82 C83 C84 C85 CS1 CS2 CS3 C63 C64 C65 C66 C52 C53 C55 C56
E
b
B1 B2 G
LS X1
t-Reset
t -Stop
Function
t max.
sec min 30 30 30 30 30 30 60* hrs day Page 61 61 61 61 61 63 63 63 63 67 67 67 67 67 68 68 68 68 69 69 69 70 70 70 70
30 60
60* 60*
60 60 60
Ext. Poti
Type RS 121 RS 121.P RS 121.R RS 122-M RS 122-MH RS 122-H RS 321 RS 521 RS 41 CPX-519 CTI-519 CEA-226 CPX-129 CFG-126 CTI-129 CEA-126 CWR-102 CX 38 CX 39 1) CNS-4 CN 135
B1 B2 G
LS
t-Reset
t-Stop
Function
t max.
sec min hrs 100 100 100 2x30 30 30 2x30 99,9 99,9 15 999
2x999
day Page 74 74 74 75 75 75 76 76 76 77 77 77 78 78 78 79 79 80 80 90 90
990
1,5
15 2x15 2x15 15 15 15 30 30
0,1
Ext. Poti
Type CRE1 CRA1 AE2 AE2M AA2 AA2M CY1 CRV1 CRV2 CSV2 CRV3 CRT3 AM1 AM2 AM3 1) CIM1 CM1 CM1L CM2 CM3 CNR1 CT1 CT1L ECO31 ECO32 CPF11 CPF22
B1 B2 G
LS
t-Reset
t -Stop
Function
t max.
sec min 30 30* 1,5 12 1,5 12
60/0,1
hrs
day Page 82 82 82 82 82 82 82 83 83 83 83 83 84 84 84 84 85 85 85 85 86 86 86 87 87 94 94
* TF-60
The TF60 time setting methode permits short examination of long delay time settings. Elapsing times of hours can be monitored in the sec. range. Example for a delay time of 38h: 1. Set range switch to 60sec 2. Set 38sec on the potentiometer (e.g. check 38sec by chronometer) 3. Set range switch to 60h The delay time now amounts to 38h.
1)
30 60* 10*
2x60* 2x60*
alternatively with instantaneous contact without auxiliary voltage (relay bistable) without auxiliary voltage (relay monostable)
60 60 60
60 100 12 12 60 12
12/ 60
t 2 = t1 t 2 = 0,5s
60 20 0,6 0,2
30 12*
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
53
KAT 2008
Tim er
CT 2
So ck
10 A
CT 3
10 A
0,25 s-30 min 0,25 s-30 min 0,25 s-30 min 0,25 s-30 min
10 A 10 A 0,8 A 5A
Universal Timer 7 timing functions. Mains kontrolled. Flashing LED shows time lapse.
0,15 s-60 min 0,15 s-60 min 0,15 s-60 min 0,15 s-60 min
10 A 10 A 0,8 A 5A
The time delay relays and monitoring relays consist of the plug-in CT time function modul and 11-pole CT output relay and the system socket C12B. Both system components can be combined freely with one another. This allows the equipment to be selected optimally for specific use. Subsequent modifications, for example a change from mechanical contacts to solid-state outputs, are possible at any time by simple reconnection. This provides the user a complete, universal system, the high flexibility of which is unique throughout the world.
Universal Timer 12 functions, mains controlled. Flashing LED shows elapsing time. Increased setting accuracy with 1:5 scale devision.
10 A 10 A 0,8 A 5A
Universal Repeat Cycle Timer Pulse or interval start. Independent setting of t1/t2. Flashing LED shows time laps.
10 A 10 A 0,8 A 5A
54
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Pa ge
61 61 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63
Tim er
Economy-Time Delay Relay 2 functions Economy-Time Delay Relay 4 functions Universal Multifunctional Time Delay Relay Time Delay Relay, no auxiliary voltage Double Time Delay Relay and Repate Cycle Timer, 6 functions Economy Time Delay Relay 4 functions Universal Multifunctional Time Delay Relay, 7 functions Universal Multifunctional Time Delay Relay Universal Multifunctional Time Delay Relay Time Delay Relay without auxtliary voltage Restart Delay Relay Universal Multifunctional Time Delay Relay, 2 functions (digital) Universal Multifunctional Time Delay Relay, 10 functions (digital) Universal Multifunctional Time Delay Relay, 10 functions (digital) Universal Multifunctional Time Delay Relay, 10 functions (digital) Universal Multifunctional Time Delay Relay, 15 functions (digital) Universal Multifunctional Time Delay Relay, 15 functions (digital) Universal Multifunctional Time Delay Relay, 15 functions (digital) Universal Multifunctional Time Delay Relay, 15 functions (digital)
C81 C82 C83 C84 C85 CS1 CS2 CS3 C63 C64 C65 / 66 C52 C53 C53.3 C53.4 C55 C55 .3 C55 .4 C56
0,2 s-30 min 0,5 s-60 min 50 ms-60 h 0,1s-20 min 2x 50 ms-60 h 50 ms-60 min 50 ms-60 h 50 ms-60 h 50 ms-60 h 0,1s-20 min 1- 6 min 0,1s - 60 min 0,1s- 60 h 0,1s - 60 h 0,1s- 60 h 0,01s - 60 days 0,01s - 60 days 0,01s - 60 days 0,01s - 60 days
8A 8A 8A 5A 8A 8A 8A 6A 6A 5A 6A 8A 8A 0,5 A 2A 5A 0,5 A 2A 5A
Pa ge
67 67 67 67 67 68 68 68 68 69 69 70 70 70 70 70 70 70 70
So ck
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
55
KAT 2008
Tim er
RS Serie Multifunctional Time Delay Relay, 5 functions Multifunctional Time Delay Relay, 5 functions Multifunctional Time Delay Relay 5 functions with t-stop- and t-reset-function Universal Cycle Timer Digital Multifunctional Time Delay Relay, 5 functions Digital Multifunctional Time Delay Relay with digital display of elapsing time, 5 functions Economy Multifunctional Time Delay Relay, 5 functions C Serie Digital Multifunctional Time Delay Relay with digital display of elapsing time, 5 functions Digital Cycle Timer Digital Multifunctional Time Delay Relay, 2 functions Multifunctional Time Delay Relay, 5 functions Time Delay Relay with 3 double functions (t1/ t2 individual) Cycle Timer Multifunctional Time Delay Relay, 2 functions Single Shot Relay 3 functions CX Serie Multifunctional Time Delay Relay 3 functions Star-delta Timer ON.. with instantaneous contact CX 38 CX 39 2 x 0,1s -15 h 1-100 ms 0,1s -15 h 6A 6A 80 80 CPX 519 0,01s -999 min 6A 77 RS121 RS121.P RS121.R 10 ms -100 h 10 ms -100 h 10 ms -100 h 5A 5A 5A 74 74 74
So ck
5A 5A 5A
RS 41-M
6A
CTI 519 CEA-226 CPX 129 CFG 126 CTI 129 CEA-126 CWR-102
2x 0,01s - 999 min 0,1s -990 min 0,1s -15 h 2 x 0,1s-5 min 2 x 0,1s -15 h 0,1s -15 min 0,1-1,5 s
6A 6A 6A 6A 6A 6A 6A
56
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Pa ge
75 76 76 76 77 77 78 78 78 79 79
Tim er
Mono function Time Delay Relay Economy Time Delay Relay ON-Delay Economy Time Delay Relay OFF-Delay Mono function Economy Time Delay Relay Mono function Economy Time Delay Relay Star-Delta Time Delay Relay CRE1 CRA1 AE2 AA2 CY1 0,5 s- 30 min 0,3 s- 30 min 0,8 s -12 min 0,8 s -12 min 0,5 - 60 s 13 13 17,5 17,5 17,5 6A 6A 10 A 10 A 6A 82 82 82 82 82
Ov
Pa ge
Extra slim 13 mm Multifunctional Time Delay Relay 3 functions Universal Time Delay Relay 3 functions Universal Time Delay Relay 7 functions Double Time Delay Relay Universal Repeat Cycle Timer CRV1 CRV 2 CSV 2 CRV 3 CRT 3 0,5 s- 30 min 50 ms- 60 h 8 ms-10 h 50 ms- 60 h 50 ms- 60 h 13 13 13 13 13 6A 6A 1,5 A 6A 6A 83 83 83 83 83
DIN A (Installation distribution panel) Economy Time Delay Relay 4 functions Universal Time Delay Relay 4 functions Universal Time Delay Relay with instantaneous contact, 4 functions Universal Function Relay with 9 functions including Staircase Lighting Timer DIN C (Industry) Universal Time Delay Relay 4 functions Universal Time Delay Relay, 4 functions with external potentiometer and t Stop/ t Reset input Universal Time Delay Relay, 7 functions Service ON/OFF Time Delay Relay, no auxiliary voltage Universal Repeat Cycle Timer CM1 CM 2 50 ms -12 h 0,3 s-12 h 17,5 35 6A 6A 85 85 AM1 AM 2 AM 3 CIM1 0,5 s- 60 min 0,5 s- 60 min 0,5 s- 60 min 0,6 s- 60 h 17,5 17,5 35 17,5 10 A 10 A 10 A 16 A 84 84 84 84
CM 3 CNR1 CT1
6A 5A 6A
85 86 86
22,5mm mounting series Economy Time Delay Relay 3 functions Multifunctional Time Delay Relay 6 functions ECO 31 ECO 32 0,5 s- 20 min 0,1s -12 h 22,5 22,5 6A 6A 87 87
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
57
KAT 2008
Se rie s
Tim er
t Pa ge
90 90 90 5A 92 6A 92 93 93 94 94 6A 95 6A 95 10 A DC 10 A DC PNP DC 0,8 A 2 x DC 150mA
Cascade Relay Multifunctional Time Delay Relay 2 functions, external potentiometer Universal Timer Module for PCB mounting 5 functions
CNS-4 CN 135 CU 23
Amplifier Relays
SFR1
Amplifier for 3 wire and Namur Sensors. Potential free contacts. Amplifier for 3 wire and Namur Sensors. Potential free contacts.
SFR2
Amplifier Blinker
SBV11 For direction indication blinkers in vehiles. High life expectancy. SSV11 For high switching numbers.
Switching Amplier
Pulse Shapers
Single Channel Pulse Shaper 4 functions Double Channel Pulse Shaper 4 functions
CPF 11 CPF 22
5 - 600 ms 50 / 200 ms
Preset Counters
CCX 350 Switching after the preset number of pulses are reached, max. 999 CCX 550 Switching after the preset number of pulses are reached, max. 999
58
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
So ck
DIN 35 DIN 35 DIN 17,5 DIN 17,5
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
59
KAT 2008
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
60
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
1 1
0,2 s - 30 min
0,2-3s/min 2-30s/min
On delay
E
CT2 (8-pin) CT3 (11-pin)
RELAY
413 58 6 19 4 1 3 5 6 7 81
t
S R on with delay S OFF R off
S R
RELAY
Off delay
A
41 3 567 8 11 9 413 586 CT2 7 A2 7 Socket 2 A1 2 S B1 CT3 10 A2 10 < A1 2 S B1
S R
Socket
www.comat.ch
MAX
10A 250 V A
UC180-265V UC90-265V UC90-150V DC9,5-18V UC20-65V
Order no.
Pulse shaping
Function Triggering
2 = 8 - pole 3 =11- pole CT .. - E 30 / ... CT .. - A 30 / ... W CT .. - K 30 / ... CT.. -W30 / ... CT .. - B 30 / ...
S R
E
A2 A1 A2 B1 A1 A2 B1 A1 +
S S S
H U M U M H H
L L L L L
S S
A K
UC
AC/DC
DC
10%
t t t
S R
ON
OFF
Industrial relay
CT2 / 3
Socket
EC-8
02
EC-11
5
22
6
24
4
12
3
14
9
34
8
32
7
24
5
22
3
14
4
12
02
Ordering example Time cubes CT2-E30/H Socket EC-8 or CS-8 Relay C2-... Time cubes CT3-E30/H Sockel EC-11 oder C11A Relay C3-...
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
S3-CT
For Relay C2...C3
EC-8
10 A 400 V
EC-11
10 A 400 V
Clip
62
HF-33
For Relay* C21...C39
A2
21
11
A1
A2
31
21
11
A1
10
11
58 ( 51* )
25
22
38
38
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
61
KAT 2008
32
30
CT-System
11
RELAYS MODULE
The consumption of the CT modules comes to less than 1W. The output relays have the complete device diagram, the performance data and the complete order no. on the front, supported by a colour code, which indicates an AC coil with red and a DC coil with blue. The .1 and .2 relays have a safety manual operation facility as a standard feature, which switches the contacts only after a lock has been released (twohand principle). The standard contacts .1 and .3 have proved their worth millions of times in heavy current applications. The contact material AgNi permits a large switching range and thanks to generous dimensioning achieves a high number of cycles. With its high breaking capacity of up to 10A/400V, this contact is a reliable allround contact for use both in mains circuits and in the lower voltage range from 12V/10mA. The twin contacts .2 and .4 switch every circuit with two independent reeds. Compared with single contacts, they provide up to 100 times greater safety with regard to the level of possible faulty switchings. In spite of their high breaking capacity of up to 6A/250V, these contacts are particularly suitable for low switching currents and switching voltages down to 1mA/6V. The solid-state relays are used instead of mechanical contacts. In the standard version .5, the relay has a potential-free output which switches an AC or DC load in the same way as a mechanical contact. However, it functions without bounce or wear, withstands overloads, has shortcircuit protection and has a practically unlimited life even with full output load. Preferred applications are high switching frequency, for example as repeat cycle timers, flashing bars with bulb load or extreme inductive loads, for example large solenoid valves, couplings, motors, etc. An additional protective wiring of the output or of the load is not necessary in these comat relays for any application. They are completely insensitive in an aggressive atmosphere, for example in the chemical industry, in waste water treatment plants, etc.
Triggering
and otheres: www.comat.ch
A2 A1 A2 B1 A1 A2 B1 A1 +
S S
Timer module
Function /triggering E W B
CT30
Economy timer
3 functions, voltage controlled, output LED. Seismic approved.
CT32
Universal timer
7 functions, voltage controlled, time lapse display, blinking. Seismic approved.
E A N K B1 W B
0,15 s - 60 min
0,15-1,5s... 6-60min
CT33
Universal timer
12 functions, voltage controlled, time lapse display, blinking, high setting accuracy by dial graduation 1:5.
E A N L F K G B1 W H B
30 ms - 60 h
30-150ms... 12-60h
CT36
I P
2x 50 ms - 60 h
2x 50-600ms... 5-60h
F O
G H
Triggering
t2= t1
Note on use
t2=0,5s
Function (page )
According to the standards Safety of machines e.g. EN 60 204-1, EN 292-2, triggering with A2potential (N / ) is only admissible in exceptional cirumstances. For that reason the comat CT modules are triggered by A1-potential (L / +). This makes them unrestrictedly suitable also for use in machines and systems which must conform with machine or CE guidelines or directives.
(+) S
a)
A1 B1 A2
( ) a) A parallel load at B1
is admissible on all CT30 modules.
Order no. for individual module (without output relay): UC110 - 240 V UC 24 - 48 V CT30 / .... V UC115 V, UC 230 V UC 24 - 48 V CT32 / .... V UC115 V, UC 230 V UC 24 - 48 V CT33 / .... V UC110 - 240 V UC 24 - 48 V CT36 / .... V
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
62
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
CT-System
11
2x
MODUL
.1
MAX
.3
RELAY: C33/...
.5
RELAY: C35/...
.7
RELAY: C37/...
3 changeover cont.
Solid-state output
for AC or DC load 0,8A 10-265 V U
Solid-state output
for DC load 5 A 10-30 V D
10A 250 V A 1)
9 8 7 5 3 4
38 36 28 26 18 16
+
9 8 7 5
RL
+
9 8
RL
2
4
9 8 7 5 3 4
14 12 Y2 Y3 18 16 28 26
3 4
17 18
7 5 3
R
MODULE A2 35 25 B1 15 A1
1)
R2
R1 25 MODULE
2)
A2
R
K
MODULE
MODULE
A2 11 Y1 B1 15 A1
B1 A1 11 6 1
A2
B1 A1 11 6 1
10 11 6 12 1 2
10 11 6 12 1 2
B
10
12 2
10
12 2
+
Order no. for module + ouput relay (delivery unit):
AC 24, 48,115, 230 V DC 24, 48,110 V CT30.3 / .... V AC 24, 48,115, 230 V DC 24, 48,110 V CT32.3 / .... V AC 24, 48,115, 230 V DC 24, 48,110 V CT33.3 / .... V AC 24, 48,115, 230 V DC 24, 48,110 V CT36.3 / .... V
A Jumper 5-7 : R2 = R1 B Jumper 6-12 : R2 = S
AC110-240 V UC 24-48 V CT30.5 / .... V AC115, 230 V UC 24-48 V CT32.5 / .... V AC115, 230 V UC 24-48 V CT33.5 / .... V AC110-240 V UC 24-48 V CT36.5 / .... V
UC110-240 V UC 24-48 V CT30.7 / .... V UC115, 230 V UC 24-48 V CT32.7 / .... V UC115, 230 V UC 24-48 V CT33.7 / .... V UC110-240 V UC 24-48 V CT36.7 / .... V
Please refer to chapter Industrial Relays for relay datas. 1) Same relay, but with twin contacts 6A 250V A order no. CT.. .2 /...V 2) Same relay, but with twin contacts 5A 250V A order no. CT.. .4 /...V
Order no.
Order no.
Order no.
CT36.1 / .... V
AC
50/60 Hz
UC
AC/DC
DC
10%
System socket C12B0 Figure: with plug-in neutral conductor connector C-A2
The Time Relays CT30.., CT32.., CT33.. and CT36.. consist of modules (incl. cover) and output relays. The socket has to be ordered seperatly. The modules can also be combined with other Comat relays. In this case the relays and the modules have to be ordered seperatly. Please refer to chapter industrial relays for datas.. Order no. for individual ouput relay (without module): Ordering example Timer CT32.1/AC230V Socket C12B0 AC24,48,115,230V DC24,48,110,220V C31/ ...V 3) C31L / ...V 4) AC24,48,115,230V DC24,48,110,220V C33 / ....V
5)
3) To module CT30 (Relay without output LED) 4) To module CT32 36 (L= Relay with output LED) 5) For relay C3... (instead of C31/32, or CT...1/.2): Retaining clip S3-C Front cover FS-R
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
63
KAT 2008
RELAY
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
64
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
65
KAT 2008
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
66
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
L ONES A C I T C A THE PR
C81
22,5 mm Plug-in Time Delay Relay System
for all delay, shot timing and blinking functions. Double functions, repeat cycle timing and functions without auxiliary voltage.
C82
Economy Time Delay Relay
on delay, off delay, one shot leading edge, pulse shaping K, voltage controlled, output-LED.
C83
Universal Multifunctional Time Delay Relay
12 functions + ON(Test), voltage controlled. Time lapse display (double blinking= t2) Input-LED (24-240V) Output-LED Seismc approved.
C84
Time Delay Relay, no auxiliary voltage
Off delay One shot trailing edge Triggering display Minimum triggering time 150ms only Seismc approved.
C85
Double Time Delay Relay and Repeat Cycle Timer
6 functions + test t1/ t 2 separately settable Time lapse display (double blinking= t2) Input-LED (24-240V) Ouput-LED Seismc approved.
Triggering
E B2
E A K W
W H B
A N
no auxiliary voltage
I P F O G H
Function (page )
A N L F K G B1 O 50 ms - 60 h
50-600ms...5-60h
Time range
TF60 setting (page ) MAX
0,2 s - 30 min
0,2-3s...2-30min
0,5 s - 60 min
0,5-6s...5-60min
2 x 50 ms - 60 h
2 x 50-600ms...5-60h
8 A 250 V A
8 A 250 V A
8 A 250 V A
5 A 250 V A
8 A 250 V A
Triggering
4 2
3 1
18 16
3 1
18 16
3 1
18 16
2 3
26 18
3 1
18 16
A2 A1 A2 B1 A1 A2 B1 A1 +
S S
R R
A2 15 A1 6
R
A2 B1 15 A1
R
A2 B1 15 A1 A2 25 17 A1
R
A2 B1 15 A1
5 7
8 6 5 7
8 6 5 7
8 6 5 7
8 6 5 7
+
AC110 - 240 V UC 24 - 48 V
+
AC 230 V AC115 V UC 24 - 240 V UC 24 V
+
AC 230 V AC115 V
AC 50/60 Hz UC AC/DC
AC110 - 240 V UC 24 - 48 V
UC 24 - 240 V UC 24 V C 85 / .... V
Ordering no.
C 81 / .... V
C 82 / .... V
C 83 / .... V
F O G H
System socket CS-18 Figure: with inserted retaining clips (standard delivery with relay)
4 2 3 1
t2= t1
t2=0,5s
24 22 14 12
C 81 C 82
C 83, 84, 85
2 4 6 8
CS-18
75
8 7
67
21 11
22,5
22
36
68
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
67
KAT 2008
CS, C60
11
LTIS
CS1
11- pole Plug-in Time Delay Relay System
for all delay, short timing and blinking functions from 50ms up to 60 hours. CS1, CS2 with connection for remote potentiometer. Front panel mounting with FZ-50.
CS2
Universal Multifunctional Time Delay Relay
like CS1, but with 7 functions and delay times up to 60 hours.
Triggering
E W B B2
E W B B2 A K N
E W B B2 A K N 50 ms - 60 h
50-600ms...5-60h
E W B B2 A K N 50 ms - 60 h 50-600ms...5-60h
Function (page )
Time range
50 ms - 60 min
50-600ms...5-60min
50 ms - 60 h
50-600ms...5-60h
8 A 250 V A
EXT POT
8 A 250 V A
EXT POT
3 4
6 A 250 V A
2nd contact: 6-5-7
4
6 A 250 V A
2nd contact: 1-4-3
Triggering
9 8 7 5
18 16 Z2 Z1
9 8 7 5 3
18 16 Z2 Z1 B1
9 8 7 5 3
18 16 28 26 B1
9 8 7
28 26 B1
3 4
18 16
A2 A1 A2 B1 A1 +
S S
R
+
A2 15 Z1 A1 1
R
A2 15 Z1 B1 A1
R
A2 15 25 B1 A1
R
A2 25 B1 15 A1
10 11
10 11
6 1 2
10 11
6 1 2
10 11 6
1 2
+
UC110-240 V UC 24-60 V UC12-15V UC110-240 V UC 24-60 V UC12 -15 V CS3 / .... V
+
UC110-240 V UC 24-60 V UC12 -15 V C63 / .... V
UC AC/DC
Ordering no.
CS1 / .... V
CS2 / .... V
System socket C11A Figure: with plug-in neutral conductor connector C-A2 (standard delivery).
EXT POT 1M
1 2 3
max. 50m
7 5/6
Z2 Z1
CS1/ 2
Ordering example
3
5 4
6 7 8 9
2 1 10
68
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
C64
11
C65, C66
1 1
C64
L
2
even if there has been a new command to switch ON. Typical application: After a mains failure it is not possible to restart (close contacts) before the machine is at rest. Example: Motor (see diagram on the left).
S
CONTACTOR
t
C65/66
N
3A
A N
without auxiliary voltage
X1 Function (page )
Triggering
X1
Time range
Partial ranges MAX
1- 6 min
1-1,5 ...4-6min
5 A 250 V A
Do not connect 5-6-7!
6 A 250 V A
Triggering
9 8
28 26 7 5
9 8
28 26
3 4
18 16
3 4
18 16
A2 A1
R
A2 25 15 A1 6
R
1 2
+
S
A2 25 15 A1 6
10 11
10 11
1 2
+
UC110-240 V UC 24-60 V 50 Hz 60 Hz AC 230 V AC115 V C66 / .... V
AC
AC 230 V AC115 V
C64 / ....V
Ordering no.
C65 / .... V
System socket C11A Figure: with plug-in neutral conductor connector C-A2 (standard delivery).
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
69
KAT 2008
C50
1 1
STERS
C52
11-pole Plug-in Time Delay Relay System
for all timing modes from 10ms up to 60 days. Extremly accurate due to quartz time base. Digital functions and residual time display. Front panel mounting with FZ-50. Test function .
C53
(C53.3, C53.4)
C55
(C55.3, C55.4)
C56
Universal Multifunctional Time Delay Relay
like type C55, but with potential free triggering of START, STOP and RESET (insulation from 2-10: 2kV).
Triggering
E A
E W H B I A K N F O
E W H B I P A K N M G F Q U V
E W H B I P A K N M G F Q U V 0,01s - 60 days
0,01-60s...0,1h-60days
Function (page )
Time range
Partial ranges MAX
0,1s - 60 min
0,1s - 60 h
0,1s-60min...0,1min-60h
0,01s - 60 days
0,01-60s...0,1h-60days
8 A 250 V A
8 A 250 V A
5 A 250 V A
RESET STOP
5 A 250 V A
+ 10V
START RESET STOP
Triggering
9 8 7 5
3 4
18 16
3 4
18 16
9 8 7 5 3 4
28 26 Y1 Y2 18 16
9 8 7 5 3 4
28 26 COM B1 18 Y1
A2 B1 A1 A2 B1 A1
S
R
+ +
S
A2 B1 15 A1 11 A2
R
B1 15 A1 11
R
A2 25 B1 15 A1
R
A2 25 Y2 17 A1
10
6 1 2
10
6 1 2
10 11
6 1 2
10 11
6 1 2
S1 S2
+
UC110-240 V UC 24 - 60 V UC 24 - 60 V
+
UC110-240 V UC110-240 V UC 24 - 60 V
7 5
Y1 Y2
A2 B1 A1
10 6 2
C53 / .... V
C55 / .... V
C56 / .... V
(P) (P)
+ S1 S2 System socket C11A Figure: with plug-in neutral conductor connector C-A2 (standard delivery).
7 5 4
COM B1 Y1
A2 Y2 A1
10 6 2
+
70
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
DISPLAY
FUNCTION TIME
t t t t t1 t2 t1 t2 t A t P tV
S INPUT R OUTPUT
t RESET t STOP
RST STP
sec
Option*
Solid-state output for C53, C55
(instead of contact)
C53.3 C55.3
For AC or DC load 0,5A 10-265V U
C53.4 C55.4
For DC load 2A 24V D
3
18
3
18
K
PNP
R
A1
A2 17 A1
RL
A2
RL
10 1 2
10
+
UC110-240 V UC 24 - 60 V C53.3 / ...V C55.3 / ...V
+
DC 24 V
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
71
KAT 2008
min
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
72
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
73
KAT 2008
RS121
11
RS 121
Time Delay Relays
Field proven since many years. The plug-in timer series from comat for highest quality requirements and unattained versatile operation.
RS 121.P
Multifunctional Time Delay Relay
5 functions 2 change-over contacts potential-free triggering or sensor PNP/NPN with connection for remote potentiometer
RS 121.R
Multifunctional Time delay Relay
5 functions with t-stop and t-Reset function 1 change-over contact potential-free triggering or sensor PNP/NPN
Triggering
3 4 1 A1 S +
PNP
Triggering
E A K N 10ms -100h
ms; s; min; h MAX
E A K N 10ms -100h
ms; s; min; h
E A K N 10ms -100h
ms; s; min; h
Function (page )
t - STOP t - RESET
A2
Time range
Partial range
5 A 250 V A
5 A 250 V A
EXT POT 1M
5 A 250 V A
STOP RST
A2
3 4 1 A1 +
S
NPN
Diagram
Connection with socket C11A
9 8 7 5
34 32 24 22
28 26 18
3 4
16
9 8 7 5
34 32 24 22
18
3 4
16
9 8 7 5
34 32 24 22
18
3 4
16
R
+
25
15
t
A1 A2 31
15
R
A1
A2 31
15
R
A1
A2 31
21
21
21
10 11
10 11
10 11
A2
3 4 1 A1 +
PNP/ NPN
+
ATX ANP UFK UCB DNX RS 121.P / .... AC 220-240 V AC110-120 V UC 24-48 V ATX ANP UFK
+
AC 220-240 V AC110-120 V UC 24-48 V ATX ANP UFK
AC 50/60Hz UC AC / DC DC
Ordering no.
10%
RS 121/ ....
RS 121.R / ....
EXT POT
5 4 3 2 1 10 6 7 8 9
1M
1 2 3
System socket C11A Figure: with plug-in neutral conductor connector C-A2 (standard delivery).
max. 50m
7 5/6
4
(M4)
C-A2
38x72cm
Z2 Z1
CS1/2
16
FS-23 20 92 9
74
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
RS122
1 1
RS 122-M
Cycle Timer
Field proven since many years. The plug-in timer series from comat for highest quality requirements and unattained versatile operation.
RS 122-MH
Universal Cycle Timer
pulse or interval start Time range: pulse 0,1s-30min interval 0,1min-30h 2 change-over contacts
RS 122-H
Universal Cycle Timer
pulse or interval start Time range 0,1min-30h 2 change-over contacts
Triggering
3 1 A1 S +
Triggering
I P t I: 0,1min-30 h t P: 0,1min-30 h
Function (page )
A2
Time range
5 A 250 V A
5 A 250 V A
5 A 250 V A
A2
3 1 A1 S +
Diagram
Connection with socket C11A
9 8 7 5
34 32 24 22
28 26 18
3 4
16
9 8 7 5
34 32 24 22
28 26 18
3 4
16
9 8 7 5
34 32 24 22
28 26 18
3 4
16
25
15
R
A1
25
15
R
A1
25
15
A2 31
21
A2 31
21
A2 31
21
A1
10 11
10 11
10 11
+
ATX ANP UFK UCB DNX AC 220-240 V AC110-120 V UC 24-48 V UC12 V DC110-240 V ATX ANP UFK UCB DNX
+
AC 220-240 V AC110-120 V UC 24-48 V UC12 V DC110-240 V ATX ANP UFK UCB DNX
AC 50/60Hz UC AC / DC DC
Ordering no.
10%
RS 122-M/ ....
RS 122-MH / ....
RS 122-H/ ....
System socket C11A Figure: with plug-in neutral conductor connector C-A2 (standard delivery).
16 4
(M4)
C-A2
38x72cm
FS-23 20 92 9
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
75
KAT 2008
RS 321, 521 RS 41
1 1
1-15 s
1-15 m 0.1-1.5 m
8
10
14 12
0.1s -15 m
RS 41-M
RS 321
Time Delay Relay
11-pole plug-in time relay for highest requirement in regard to quality and performance. Application-oriented, universal employment, operator friendly.
RS 521
Digital Multifunctional Time Delay Relay
digital time elapse display time stop function 2 change-over contacts potential-free triggering
RS 41-M
Economy Multifunctional Time Delay Relay
5 functions 1 change-over contact potential-free triggering with front cover
Triggering
3 4 1 A1 S +
PNP
Triggering
E A K N
E A K N
E A
W B K
Function (page )
A2
Time range
Partial range MAX
0,01s-99,9 h
s; min; h
0,01s-99,9 h
s; min; h
0,1s -15min
s; min
5 A 250 V A
5 A 250 V A
t- STOP
6 A 250 V A
A2
3 4 1 A1 +
S
NPN
Diagram
Connection with socket C11A
9 8 7 5
34 32 24 22
28 26 18
3 4
16
9 8 7 5
34 32 24 22
28 26 18
3 4
16
9 8 7 5
34 32 24 22
28 26
3 4
25
15
R
A1
25
15
R
A1
25
A2 31
21
A2 31
21
A2 31
21
A1
10 11
A2
3 4 1 A1 + S
NPN
10 11
10 11
+
ATX ANP UFK UCB DNX DC110-240 V DNX UC 24-48 V UFK AC110-240 V ANX
+
AC220-240 V AC110-120 V UC 24-48 V ATX ANP UFK
AC 50/60Hz UC AC / DC
5 3 4 A2 6 1 A1 S +
DC
Ordering no.
10%
RS 321/ ....
RS 521/ ....
RS 41-M / ....
5 3 4 A2 6 1 A1 +
System socket C11A Figure: with plug-in neutral conductor connector C-A2 (standard delivery).
S
16
FS-23
3 4 5 A2 6 1 A1 +
FS-40
38x72cm
(M4)
C-A2
36x40cm
5 9 85
20
92
76
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
1 1
CPX-519
Time Delay Relay
Field proven since many years. The plug-in timer series from comat for highest quality requirements and unattained versatile operation.
CTI-519
Digital Cycle Timer
Rest interval can be set separatley digital time elapsed display 2 change-over contacts potential-free triggering
CEA - 226
Time Delay Relay
2 change-over contacts potential-free triggering
Triggering
7 A2 5 6 A1 S +
Triggering
E A K N
E A
Function (page )
Time range
Partial range MAX
0,1s -990 s
s
6 A 250 V A
6 A 250 V A
6 A 250 V A
7 A2
5 6 A1
Diagram
S +
PNP
7 6 7 6 NAMUR
9 8 7 5 3 4
34 32 24 22 14 12
28 26 18 15 16
9 8 7 5 3 4
34 32 24 22 14 12
28 26 18 15 16
9 8 7 5 3 4
34 32 24 22 14 12
28 26 18 15 16
25
25
25
A2 31
21 11 A1
A2 31
21 11 A1
A2 31
21 11 A1
10 11
6 1 2
10 11
6 1 2
10 11
6 1 2
+
ANX UFK UCB DNX AC110-240 V UC 24-48 V UC12 V DC110-240 V ANX UFK UCB DNX AC220-240 V AC110-120 V UC 24-48 V UC12 V DC110-240 V
+
ATX ANP UFK UCB DNX
7 A2
5 6 A1 +
AC 50/60Hz UC AC / DC DC
10%
PNP
7 6 7 6 NAMUR
Ordering no.
S
CPX-519 / ....
CTI-519 / ....
CEA-226 / ....
7 A2
5 6 A1 +
System socket C11A Figure: with plug-in neutral conductor connector C-A2 (standard delivery).
16 4
(M4)
C-A2
38x72cm
FS-23 20 78 9
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
77
KAT 2008
1 1
CPX-129
Time Delay Relay
Field proven since many years. The plug-in timer series from comat for highest quality requirements and unattained versatile operation.
CFG-126
Multifunctional Time Delay Relay with 3 double functions
individual setting of t1/ t 2 2 change-over contacts potential-free triggering
CTI-129
Multifunctional Cycle Timer
Reset interval can be set separate 2 change-over contacts
Triggering
7 A2 5 6 A1 S +
Triggering
E A K N 0,1s -15 h
s; min; h MAX
F H
Function (page )
Time range
Partial range
2x 0,01s -15min
s; min
2x 0,1s -15 h
s; min; h
6 A 250 V A
6 A 250 V A
6 A 250 V A
7 A2
5 6 A1
Diagram
S +
PNP
7 6 7 6 NAMUR
9 8 7 5 3 4
34 32 24 22 14 12
28 26 18 15 16
9 8 7 5 3 4
34 32 24 22 14 12
28 26 18 15 16
9 8 7 5 3 4
34 32 24 22 14 12
28 26 18 15 16
25
25
25
A2 31
21 11 A1
A2 31
21 11 A1
A2 31
21 11 A1
10 11
6 1 2
10 11
6 1 2
10 11
6 1 2
+
ATX ANP UFK UCB DNX AC220-240 V AC110-120 V UC 24-48 V UC12 V DC110-240 V ATX ANP UFK UCB DNX AC220-240 V AC110-120 V UC 24-48 V UC12 V DC110-240 V
+
ATX ANP UFK UCB DNX
7 A2
5 6 A1 +
AC 50/60Hz UC AC / DC DC
10%
PNP
7 6 7 6 NAMUR
Ordering no.
S
CPX-129 / ....
CFG-126 / ....
CTI-129 / ....
7 A2
5 6 A1 +
System socket C11A Figure: with plug-in neutral conductor connector C-A2 (standard delivery).
16 4
(M4)
C-A2
38x72cm
FS-23 20 78 9
78
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
CEA, CWR
1 1
CEA-126
Time Delay Relays
Field proven since many years. The plug-in timer series from comat for highest quality requirements and unattained versatile operation.
CWR-102
Single Shot Relay
3 functions function t1 = t 2 2 change-over contacts potential-free triggering
Triggering
7 A2 5 6 A1 S +
Triggering
W Q
Function (page )
Time range
Partial range
0,1-1,5 s
6 A 250 V A
6 A 250 V A
7 A2
5 6 A1
Diagram
S +
PNP
7 6 7 6 NAMUR
9 8 7 5 3 4
34 32 24 22 14 12
28 26 18 15 16
9 8 7 5 3 4
34 32 24 22 14 12
28 26 18 15 16
25
25
A2 31
21 11 A1
A2 31
21 11 A1
10 11
6 1 2
10 11
6 1 2
+
ATX ANP UFK UCB DNX AC220-240 V AC110-120 V UC 24-48 V UC12 V DC110-240 V ATX ANP UFK UCB DNX
7 A2
5 6 A1 +
AC 50/60Hz UC AC / DC DC
10%
PNP
7 6 7 6 NAMUR
Ordering no.
S
CWR-102 / ....
7 A2
5 6 A1 +
System socket C11A Figure: with plug-in neutral conductor connector C-A2 (standard delivery).
16 4
(M4)
C-A2
38x72cm
FS-23 20 78 9
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
79
KAT 2008
CX
1 1
CX 38
Time Delay Relays
Electronic Timer Relay with mains triggering and 2 change-over contacts. Digital timing generated with RC-Oscilator and frequency conductor with LED indication of relay function.
CX 39
Star-Delta Timer
adjustable - change-over pause. On delay with instantaneous contacts (R1 = immediately / R 2 = t ) 2 change-over contacts
Triggering
7 A2 5 6 A1 S +
Triggering
F H
Function (page )
Y = S E = D
Time range
Partial range MAX
0,1s -15 h
s; min, h
t t
6 A 250 V A
6 A 250 V A
7 A2
5 6 A1 S +
Diagram
Connection with socket C11A
9 8 7 5 3 4
34 32 24 22 14 12
28 26 18 15 16
9 8 7 5 3 4
34 32 24 22 14 12
28 26 18 16
R
7 A2 5 6 A1 + S
25
R1
25
R2
15
R1 ( ) R2 ( )
A2 31
21 11 A1
A2 31
21 11 A1
10 11
6 1 2
10 11
6 1 2
+
ATX ANP UFK UCB DNX AC220-240 V AC110-120 V UC 24-48 V UC12 V DC110-240 V ATX ANP UFK UCB DNX
AC 50/60Hz UC AC / DC
7 A2
5 6 A1 +
DC
Ordering no.
10%
CX 38 / ....
CX 39 / ....
7 A2
5 6 A1 S +
System socket C11A Figure: with plug-in neutral conductor connector C-A2 (standard delivery).
16 4
(M4)
C-A2
38x72cm
FS-23 20 78 9
80
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Multifunction Time Delay Relays Extra slime Time Delay Relays 13 mm DIN-A (Installation, distribution panel) DIN-C (Industry) 22,5mm Seies
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
81
KAT 2008
CRE1
Economy Time Delay Relays
Only 13 or 17,5mm wide. Ideal for applications with a fixed function E, A or Y. For snap-on installation in accordance with DIN 43880. Economy time delay relay on delay voltage controlled LED for R.
CRA1
Economy time delay relay off delay votage controlled LED for R
AE2 AE2M
Economy time delay relay
on delay voltage controlled 1changeover contact Output-LED
AA2 AA2M
Economy time delay relay
off delay voltage controlled 1changeover contact Output-LED
CY1
Star-delta time delay relay
with adjustable interval Safety locking of the ouput
Triggering
Function (page )
Time range
TF60 setting (page ) MAX
0,5 s- 30 min
s, min
0,3 s- 30 min.
s, min
t t -
0,5 - 60 s 50 /100 ms
6 A 250 V A
6 A 250 V A
10A 250 V A
+
10A 250 V A
+ +
R
16 18 A2
6 A 250 V A
+
A1 17
Triggering
17
A2 A1 A2 B1 A1 +
S S
18
15
18
A1 15
A1 15 B1
R
16 A2
R
B1 A1
R
16 18 A2
A2
A1
18 28 A2
+
AC 230 V AC115 V UC 24 V CRA1 / ....V AC 220 -240 V AC110 -127 V UC 24 V AE2 / .... V AE2M / .... V AC 220 -240 V AC110 -127 V UC 24 V AA2 / .... V AA2M / .... V CY1 / .... V UC110-240 V UC 24 - 60 V
AC 50/60 Hz UC AC/DC
Ordering no.
CRE1 / .... V
BS13-K BS13-G
(incl.paper)
CY1
TS35
90
45
TS 35
75
Ordering example
4,2 2,5
Timer CRE1/AC230V
13 44 11 Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
17,5
45
44
20
82
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
LIM 13mm S
BUT. . . . .
CRV3 CRT3
Function: F/Q
Function: I/P
2
CRV1 CRV2
Universal Multifunctional Time Delay Relay
2 delay functions 2 shot timing modes pulse shaping K LED for B1and R
CSV2
Multifunctional Time Delay Relay
like CRV2, but with solidstate ouput and connection for remote potentiometer.
CRV3
Double Time Delay Relay
F (E and A) or (W and N) t1/t 2 separately settable LED for B1and R Function switch at the right side of the device
CRT3
Universal Repeat Cycle Timer
Pulse or pause start t1/t 2 separately settable LED for A1and R Function switch at the right side of the device
Triggering
E W B
E W A K N
E W B B2 E A K N 8 ms -10 h
s, min, h
F O
I P
Function (page )
Time range
TF60 setting (page ) MAX
0,5 s- 30 min
s, min
0,05 s - 60 h
s, min, h
t1: 50 ms - 60 h t2: 50 ms - 60 h
t1: 50 ms - 60 h t2: 50 ms - 60 h
6 A 250 V A
6 A 250 V A
1,5 A 24 V D
EXT POT
6 A 250 V A
6 A 250 V A
Triggering
17
A2 A1 A2 B1 A1 A2 B1 A1 +
S S
18
15
18
Z1
Z2
K
15
18
15
18
R
16 A2
R
B1 A1
R
B1 A1 16 A2 16 A1
+
B1 A1 16 A2
A2
A1
O A2
+
AC 230 V AC115 V UC 24 V CRV2 / .... V DC 24 V
+
AC 230 V AC115 V UC 24 V
+
AC 230 V AC115 V UC 24 V CRT3 / ....V
CSV2 / .... V
CRV3 / .... V
BS13-K BS13-G
(incl.paper)
TS35
max. 50m
45
90
Z1 Z2
CSV2
Ordering example
3
5 4
6 7 8 9
2 1 10
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
83
KAT 2008
DIN
NEW
AM1
17,5 mm time delay relay system
in compact design. Suited for snap-on installation in accordance with DIN 43 880. CIM1 mit Treppenhausautomat und Schrittschalter.
AM2
Universal Time Delay Relay
on delay off delay one shot leading edge pulse shaping K voltage controlled Output-LED
AM3
Universal Time Delay Relay with instantaneous contact
or both contacts delayed (programmable). Functions like type AM2. Display of control input B1(S) in addition to the output-LED.
CIM1
Universal Function Relay
9 functions stepping switch (S) staircase lighting timer (LS) 1 change-over contact hand function switch for maintenance functions (ON/OFF)
Triggering
E W B B2
E A K W
E A K W
B W
Function (page )
Time range
Partial ranges MAX
0,5 s - 60 min
0,5-6s...5-60min
0,5 s - 60 min
0,5-6s...5-60min
0,5 s - 60 min
0,5-6s...5-60min
10 A 250 V A
+
A1 15
10 A 250 V A
+ +
R
16 18 A2
10 A 250 V A
R2= S R2= R (25-26-28)
16 A 250 V A
+ +
A1 B1 A2
Triggering
+
A1 15
25
A1 15 B1
21 B1
A2 A1 A2 B1 A1 A2 B1 A1 +
S S
R
16 18 A2
R2
26 28
16 18 22 24 A2
15 16 18
AC 50/60 Hz UC AC/DC
UC110 - 240 V UC 24 - 60 V
UC 24-240 V
Ordering no.
AM1 / .... V
AM2 / .... V
CIM1/ .... V
TS 35
75
75
17,5
35
45
44
20
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
84
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
ST OUR BE HORSE
2
CM1
17,5 mm Time Delay Relay System
in compact design. (For snap-on installation in accordance with DIN 43 880, see series DINA and C13.)
CM1L
Universal Time Delay Relay
like type CM1, but with extended time range.
CM2
Universal Time Delay Relay
like type CM1, but with time stop and reset input as well as connection for remote potentiometer 100k. 2 heavy current contacts.
CM3
Universal Time Delay Relay
7 functions Mainenance switch ON/OFF 2 seperate change-over contacts supply voltages: DC12-24V or DC24-48/AC24-240V
Triggering
E A K W
E A K 0,3 s -12 h
s, min, h
E W A K 0,3 s -12 h
0,3-3s...1,2-12h
E W A K N B1 50 ms -60 h
ms, s, min, h
Function (page )
B W
Time range
Partial ranges MAX
50 ms-100 min
ms, s, min
6 A 250 V A
+
R
16 18 A2
6 A 250 V A
+
R
16 18 A2
6 A 250 V A
+
R
16 18 28 Z1 Z2 A2
EXT POT
5 A 250 V A
+
RESET STOP
Triggering
15 16 18
R
A1 15 B1
A2 A1 A2 B1 A1 A2 B1 A1 +
S S
A1 15 B1
A1 15 27 B1 S
25 26 28
R
A1 B1 A2
+
DC 24-48 V /AC 24-240 V DC12-24 V CM 3 / .... V
UC AC/DC DC 10%
Ordering no.
UC110-240 V 16 / ...60 Hz
23
UC110-240 V 16 / ...60Hz
23
UC110-240 V UC 24 - 60 V CM 2 /.... V
UC 24 - 60 V CM1/.... V
UC 24 - 60 V CM1L /.... V
CM3
LABEL LABEL
CM2
Z1 Z2
max. 50m
TS 35
75
75
3 2
Ordering example
2,5 4,2 4,2 2,5
Timer CM1/UC110-240V
8 5 64 10
17,5
35
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
85
KAT 2008
CNR1
17,5 mm Time Delay Relay System
in compact design. (For snap-on installation in accordance with DIN 43 880.
CT1
Universal Repeat Cycle Timer
pulse or pause start t1/ t 2 separately settable LED for A1 and R
CT1L
Universal Repeat Cycle Timer
Like CT1 buth with extended time range.
Triggering
A N
no auxiliary voltage
I P
I P
Function (page )
Time range
Partial ranges MAX
5 A 250 V A
+
A1 15
6 A 250 V A
+
A1 15
6 A 250 V A
+
A1 15
Triggering
A2 A1 A2 B1 A1 A2 B1 A1 +
S S
R
16 18 A2
R
16 18 A2
R
16 18 A2
UC AC/DC
UC110-240 V UC 24 - 60 V
Ordering no.
CNR1 / .... V
LABEL
Ordering example
4,2 2,5
TS 35
75
8 5 64 10
17,5
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
86
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
2
ECO 31
Multifunctional Time Delay Relays 22,5 mm
for timing functions from 0,1s up to 12 hours.
Triggering
E W B
E W B A K N
Function (page )
Time range
TF60 setting (page ) MAX
0,5 s - 20 min
sec, min
0,1 s -12 h
sec, h
6 A 250 V A
6 A 250 V A
Triggering
16 15 18
A2 A1 A2 B1 A1 +
S S
16 15 18
A2 A2 A1
A2 B1 A1
+
AC 230 V AC115 V UC 24 V ECO32 / .... V
AC 50/60 Hz UC AC/DC
Ordering no.
987
65
TS35
90
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
87
KAT 2008
32
10
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
88
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
CN Series Specially Time Delay Relays SFR Serie Amplifier Relays, Switching Amplifier SBV Amplifier Blinker CPF Pulse Shaper CCX Preset Counters
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
89
KAT 2008
CNS-4
Industrial Time Delay Relays
CN135 with 2 change-over contacts. CNS-4 with 4 independent outputs.
CN 135
Specially Time Delay Relays
2 functions connections for external potentiometer 1M 4 outputs detachable terminals seismic approved according IEE 323 and IEE 344
Cascade Relay
ON cascades ON /OFF cascades 4 outputs detachable terminals
Triggering
E4 EA 4 0.1s-30 min
s, min MAX
E4
On delay
Function (page )
S t t t t
R1 R2 R3 R4
A 0.1s-30 min
s, min
Time range
Partial range
6 A 250 V A
On delay Off delay
8 A 250 V A
Triggering
Y1 Y2
Y1 Y2
A1 A2 B1
A2 B1 A1
S
EA 4
A1 15 25
Y1 Y2 B1
A2 B1 A1 A2 B1 A1 A2 B1 A1 +
S
R1
R2
R3
R4
R
Z1 Z2 A2
S t t t t t t t t
R1 R2 R3 R4
16 18 26 28
EXT POT
15 18 25 28 35 38 45 48
AC 50/60Hz UC AC/DC
Ordering no.
CNS-4 / .... V
CN 135 / .... V
EXT POT 1M
3 2 1
max. 50m
Z1 Z2
CN135
5 4 3 2 1 10 6 7 8 9
90
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
2
CU23
Universal Timer Module
with soldering pins for printed circuit mounting.
min
19
Time range
Partial range x1 1 x6 1 x30 1 2 3 4
0,01- 3 s
0,01-0,1s 0,06-0,6s 0,3-3s 15
0,05- 30 s
0,05-1s 0,3 - 6s 1,5-30s 14
0,05- 30 m
0,05-1min 0,3 - 6min 1,5-30min 14
1- 300 min
1- 10min 6-60min 30-300min 15 100K 560 nF 1M
Triggering
E A K N W
Series resistor Rv Extender capacitor Ct Adjustable resistor Rt
Function (page )
6K8 100K 1M 1M
Time range
Partial range MAX
0.01s-300 min
s, min
120 mA 24 V D
Programming
6 7 8 9 10 6 7 8 9 10
Triggering
10-28 V
10 11 5
S
10 11 5 +
S
min s
S
11 12 13 14 Rt
5 17 18 19 20 CU23 + PNP
+
150 mA
+
t
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
t x1 x6 x30
Ct
DC
10%
Ordering no.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
120 mA
N A 8 E 9 K 10 1
6 7
NPN
4 15
91
KAT 2008
SFR
1 1
Amplifier Relays
SFR1
Amplifier Relay
Supply unit with integrated switching amplifier for 3-wire PNP sensors, NAMUR as per DIN 19234 as well as for contact triggering also with external power supply. The input wiring is specifically suitable for long feed wires.
SFR2
Amplifier Relay
switching amplifier for: - PNP 3 wire sensors - NAMUR sensors potential-free contact integrated sensor supply voltage 14V The input wiring is specifically suitable for long connection lines
Amplifier Relay
switching amplifier for: - PNP 3 wire sensors - NAMUR sensors potential-free contact integrated sensor supply voltage 24V The input wiring is specifically suitable for long connection lines
MAX
5 A 250 V A
9 8 7 5 3 4
34 32 24 22 14 12
6 A 24 V U
9 8 7 5 3 4
34 32 24 22 14 12
Diagram
Connection with socket C11A
R
A2 31
R
21 11 A1
A2 31
21 11 A1
10 11
6 1 2
10 11
6 1 2
+
Output supply
DC output supply Output voltage Output current max.
+
+ +
DC 14V 4mA output active output inactive output inactive
5 6 7
5 6 7
Triggering
NAMUR sensor
Not damped Damped Wire break
5 6 7
5 6 7
+
+ O 5 6 7
10-30VD 5 6 7
S
18-30V D
S 5 6 7
5 6 7
10-30V D
S 5 6 7
5 6 7
Galvanic isolation
>2kV (triggering to supply and output) >2kV (triggering to supply and output)
AC 50/60 Hz
Ordering no.
UC AC / DC
AC110-120 V
System socket C11A Figure: with plug-in neutral conductor connector C-A2 (standard delivery).
4
16
(M4)
C-A2
38x72cm
FS-23 20 92 9
92
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
SBV
11
Amplifier Relays
60
90
SBV11
Blinker and Aplifier
Relay with solid state output specially suitable for frequent switching cycles.
SSV11
Switching Amplifier
With solid state output. For applications in automation where high switching cycles and loads up to 10A at 10-45V DC are required. For example for solenoids, magnetic clutches and other ohmic inductive or capacitive loads. With built-in short circuit limiter and over-load protection circuit, this amplifier switches wear free and guarantees high service life. LED display for trigger signal.
Amplifier-Blinker
With solid state output. Adjustable electronic flasher for 60-90 pulses/min. Switching voltage 10-45V DC and switching loads up to 10A. The short circuit limiter and the overload proof design alows wear free switching of filament lamps in general but as well as all ohmic, inductive and capacitive loads. Triggering supply is indicated by LED.
B 60-90 I/min
10 A 10 - 45 V D
S
8
Amplifier
10 A 10 - 45 V D
S
Blinker
Diagram
Connection with socket CS11
7 6 5 4
7 6 5 4
32 24 21 22 12
32 24 21 22 12
S
K K
34 A2 31 11 A1 14
34 A2 31 11 A1 14
9 10 11 1 2 3
9 10 11 1 2 3
+
DC12-36 V DC12-36 V SSV11/ ....
DC
10%
Ordering no.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
38x72cm
93
KAT 2008
70
80
CPF11
CPF Pulse Shapers
with the timing functions K, L and A are specialist devices for the lengthening or the limitation of control pulses. In this fully electronic design with the facility for also con-necting NAMUR sensors they are the ideal interface modules in modern control systems. Always there where fast processes, high rotations, i.e. the briefest pulses, are to be evaluated, the costeffective solution is: CPF Pulse shapers.
CPF22
Double Channel Pulse Shaper
Input/output galvanically isolated 4kV Input and output times separately settable 2 functions to choose LED output display for each channel
K L A
input pulse output pulse
K A
input pulse output pulse
1/ 5 ms
5 600 ms
0,5 / 2,5 ms
50 / 200 ms
15 32V D
NAMUR sensor
1928V
Three-wire sensor
1532V
+ +
PNP
15 32V D 1S 2S
E1 E2
4K7 4kV
+
S NAMUR
E2
+
S PNP E1
3K3
11K 5K6
E1 CPF
150mA
PNP
2O
CPF
FD
+
+
10 45V D
1O
0,8A
1RL
2RL
RL
DC
10%
DC 24 V CPF11 / .... V
DC 24 V CPF22 / .... V
Ordering no.
CPF11
CPF22
TS 35
Ordering example
4,2 2,5
75
8 5 64 10
17,5 Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
94
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
CCX
1 1
Preset Counters
CCX-350
Preset Counters
Electronic pre-select counter with 2 change-over contacts. Digital value display with LED function indication. Suitable for front panel mounting.
CCX-550
Preset Counters with display
Switching after the preset number of pulses are reached. 7 digit LED display Triggering: potential-free contact NAMUR sensor PNP
Functions
U
1 n 1
Preset Counters
Switching after the preset number of pulses are reached. Triggering: potential-free contact NAMUR sensor PNP
C R Q
CE
Q is active after reaching the preselected number of pulses. Q and C can be reset with the reset button.
U
1 n 1
C R Q
Function Preselection
Count frequency MAX
CE CK 0 - 999
200Hz
CI
CE CK 0 - 999
200Hz
CI
CK
Q is active during the preselected number of pulses and can only be reactivated after a reset. Q and C can be reset with the reset button.
U
1 n 1 1 n
6 A 250 V A
PNP
7 6
6 A 250 V A
PNP
7 6
C R Q
Diagram
Connection with socket CS11
CI
t
NAMUR 7 COUNT 6 7 6
NAMUR
Q is active for t 75...125ms on the preselected pulse. The cycle starts again at the beginning. Q and C can be reset with the reset button.
ON OFF
R RESET
COUNT
R RESET
U = Voltage C = Count R = Reset Q = Output relays
8
32
7 6 5 4
24 21 22 12 OUTPUT
8
32
7 6 5 4
24 21 22 12 OUTPUT
Q
34 A2 31 11 A1 14
Q
34 A2 31 11 A1 14
9 10 11 1 2 3
9 10 11 1 2 3
AC 50/60 Hz UC AC/DC
Ordering no.
CCX-350 / ....
CCX-550 / ....
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
38x72cm
95
KAT 2008
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
96
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Sockets for Time Delay Relays Economy Sockets System Sockets Chassis Sockets Accessories pour Sockets Accessories for Time Delay Relays External Potentiometer Surface Mounting Case Divers
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
97
KAT 2008
Socket
1 1
C11A
System socket 11-pole,
with white cover and plug-in connector C-A2. (standard delivery)
EC11
Economy socket
11-pole
CS11
Socket 11-pole
Snaped cover sheet with wiring diagram. (backside neutral white)
EC 8
Economy socket
8-pole
CS 8
Socket
8-pole
C12B
System Socket 11-pole, 12 terminals (+B1). SC-3 inserted for B1-2-A1. Cover transparent.
C12B1
System Socket 11-pole, like C12B, but with imprinted contact diagram for 3 pole industrial relays.
C12B0
System Socket 11-pole, similar to C12B. Prepared for CT system (without SC-3, SD-1).
CS18
Socket 8-pole for time delay relays C81...C85 series.
11 PGL
Socket 11-pole for chassis mounting with soldering pins.
Socket types
CT30...CT36
C81...C85
CT2
Connection layout
(from left to the right)
System-Sockel Economy-Socket Socket System Socket System Socket System Socket Socket Socket Economy Socket Chassis Socket
A A B A A A
A
9 8 7 5 4 3
11
B
8 76 5 4
9 11
13
recommended applicable
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
98
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Socket accessories Type CA-11 CA-8 C-A2 SC-3 LH-1 SL-36 SP-36 PS-W L-16 SD-1 SD-1W SS-T SS-W SA-0 Description Coding ring (VE 5 pieces) Coding ring (VE 5 pieces) Neutral connector bridge (VE 5 or 50 pieces) A1-Connector (VE 10 pieces) Marking lable holder (VE 5 pieces) Marking lable holder (VE 5 pieces) Marking lable strips (VE 5 pieces) Marking lable strips (VE 5 pieces) Marking lable strips (VE 5 pieces) Cover lid transparent (VE 5 pieces) Cover lid white Cover transparent Cover white Wall braket C11A EC-11 CS-11 C12B
LABELS
7 6 5
TEST
SP-36
32 24 21 22 12
SL-36
7 5
15
3,2
8
5,3
68
3
TS 35
29,5
CA-8 CA-11
34 A2 31 1 1 A1 14
9 10 1 1 1
2 3
CS-8 CS-11
20
38
PS-W L-16
24 22 14 12
12345
S+S, wieland
LH-1
30
2 4 1 3 5
SWISS
16 4
max 40
SS-T
75
75
6 8
SS-W
10
M3 FOR M4
C-A2 SC-3
CONNECTOR
C-A2
CS-18
for modules
TS 35
C-A2
A2-CONNECTOR
FOR PLUG-IN MODULES
A2
B1
A1
SA-0
21 11
10
1 1
12
SD-1 SD-1W
CS-18
for M3 14
20
38
C11.. C12..
22,5
3,5
22,5
6
24
5
22
4
12
3
14
9
34
8
32
7
24
5
22
3
14
4
12
EC- 8
EC- 11
6 M4 M3 28
62
62
for M4
24.2
18
28 for M3
A2 31 21 11 A1
23
A2
21
11
A1
10
1 1
22
EC 8
38
EC11
38
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
99
KAT 2008
SET No.
IP 65
4 7 8 9 1 10
SOCKET
FZ-50L
1 2 3
42,6
FRONT 0,6 45 + 0
3 2
1M 100K 1 2 3
0,6 33 + 0
2223
1,5 .. 5
30
56
36
48
36
22
68
18
SET No.
FZ-23
SET No.
FZ- 40
1.. 4
72
0,6 38 + 0
0,6 36,5 + 0
50
8 42 75 / 89 15,5 49 82 12
Marking labels
Large and small for relay system C13.
Transparent covers
Retaining clips
Matching diverse cases and sockets.
BS13-K BS13-G
PLUG-IN MODULE
Retaining clips
Matching diverse cases and sockets.
HF-50
SWISS
HF-32 S3-C
INDUSTRIAL RELAY
TIME CUBE INDUSTRIAL RELAY
HF-33 S3-CT
C-A2
PLUG-IN MODULE
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
100
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
External potentiometer Type SP-01/100 k SP-01/1M CSV2 CS1 Time delay relays CM2 CS2 RS 121.P CN 135
Product families
Type BS13-G BS13-K FA-50 FS-23 FS-40 FS-C5 FS-R FS-.. FZ-23 FZ-40 FZ-50L GC-T GC-W HF-24 HF-32 HF-33 HF-50 S3-C S3-CT RG RG-D2 RG-C2 RG-C3 RG-50 RG-23 RG-40
Descriptions Marking label strip large Marking label strip small Front cover Front cover Front cover Cover for relay C30 Cover for relay C3-.. Cover for relay C5-.. Front mounting set Front mounting set Front mounting set (incl. Socket 11PGL) Relay retaining clip transparent Relay retaining clip white Retaining clip Retaining clip for relay C30 Retaining clip for relay C20/C30 Retaining clip Retaining clip for relay C3 Retaining clip for relay C2/C3 Surface mounting case DIN rail Surface mounting case DIN rail Surface mounting incl. Socket CS-8 Surface mounting incl. Socket CS-11 Surface mounting incl. Socket CS-11 Surface mounting incl. Socket CS-11 Surface mounting incl. Socket CS-11
Surface Mounting Case with built-in DIN rail or with socket (Screws touch safe)
Gray polymer with or without window..
RG
RG - ...
RG - ...
Socket
4,5
. . . mm
WxH --21 x 46 mm 36 x 36 mm 36 x 36 mm 36 x 50 mm 39 x 73 mm 37 x 40 mm
TS 35
125
7,5
94
96
83,5
3 24
96
67
50
97
97
Function Page: 52; TF- 60 setting: Page 53; Socket and Accessories: Page 97
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
101
KAT 2008
DIN B /C
CT30...
C80...
C13...
RS 40
CT2...
CT3...
DIN A
Notes
102
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Installation Relays
Installation Relays
Power Relays Step-on Step-off Relays Staircase Lighting Timers Power Step-on Step-off Relays Installation Contactors
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
103
KAT 2008
Notes
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
104
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Installation Relays
an ge ty p e et Co nta c Se rie s t
Tim er
CIM1 CRS1C
DIN 35 DIN 35
16 A 106 6 A 106
Pa ge
10 A 107 10 A 107 10 A 108 10 A 108 10 A 108
So ck
Power Relays
B103 A 333
DIN 35 DIN 35
AL1 AL 2 AL 3
Staircase Lighting Timer for central control Staircase Lighting Timer for central control
AL 4 AL 5
30 s -60 min
DIN 35 DIN 35
10 A 109 10 A 109
Installation Contactors
Installation Contactor
RIC 20
DIN 35
20 A 110
Installation Contactor
RIC 25
DIN 35
25 A 110
Installation Contactor
RIC 40
DIN 35
40 A 110
Installation Contactor
RIC 63
DIN 35
63 A 110
AUX Block
RIC-AUX
6 A 110
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
105
KAT 2008
Installation Relays
CIM, CRS
Type: AS1 No longer available substituted by CIM1
DIN
17,5mm
CIM1
Step-On Step-off Relay
with integrated LED display no external wiring required Mounting on DIN rail TS35 Test voltage: 2000V Tamb. operation/storage: -20..+60/- 40..+85C Railway version up to -46
13 mm
CRS1C
Step-On Step-Off Relay
with integrated LED display no external wiring required Mounting on DIN rail TS35 Test voltage: 2000V Tamb. operation/storage: -20..+60/- 40..+85C
Time Range
and otheres:
www.comat.ch
MAX MIN
0,6 s - 60 h 16 A 250 V A
10mA 12V
and otheres:
www.comat.ch
MAX MIN
6 A 250 V A
10mA 12V
Triggering
B W
14 12 11 12
Function (page )
A K N B1 S LS
Triggering
A2 A1 A2 B1 A1 A2 B1 A1 +
S S
+
(DC-version)
A1 B1 A2
+
A2 A1
15 16 18
Data at Tamb =20 C
+
Contact material Switching current /voltage Switching power AC1 // DC1 Switching cycles mech. Operating voltage Power consumption Triggering delay / release time AgNi 15A/20ms 1500VA // ...180W DC: 10 x10 6; DC 15% AC 15% / DC 15% 2VA 1,5W Recommended triggering time 50ms
Contact material Switching current /voltage Switching power AC1 // DC1 Switching cycles mech. Operating voltage Power consumption AC /DC Triggering delay / release time Glow lamp load
AgNi 16A 250V 4000VA // 384W 30 x 10 6 AC 20% / DC 20% 1,2VA, 430mW 10ms / 10ms 10mA
AC
50/60Hz CRS1C / AC 230 V
UC
/
DC
CIM1/ UC 24 -240 V 10% CRS1C / DC 24 V BS13-K BS13-G
(incl.paper)
TS35
TS 35
75
45
Ordering example
17,5 5 44 20
90
13
44
106
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
45 11
Power Relays
B103
Power Relays
with mechanical output status A333 with DIN 45mm cap dimension Test voltage: 2000V 2000V Tamb. operation/storage: -20..+60/- 40..+85C
A 333
Power Relay
1 pole power relay with free-wheeling diode and reverse polarity protection Integrated LED position indicator
Power Relay
1 pole power relay with free-wheeling diode and reverse polarity protection Integrated LED position indicator
3
and otheres:
www.comat.ch
MAX MIN
10 A 250 V A
10 mA 12 V
10 A 250 V A
10 mA 10 V
+
A1 11
+
A1 11 21 31 32 R R R
R 12 14 A2
12 14 22 24 34 A2
Data at Tamb = 20 C
Contact material Switching power AC1 // DC1 Peak inrush current Switching cycles mech./elec. (AC1) Operating voltage AC50Hz/DC Power consumption AC/DC Triggering delay / release time
AgCdo 2200VA // 150W (DC) 16A 2x 10 7 AC 15% / DC 15% 2VA, 1,5W 20ms / 12ms 220-240, 110-127 B103 /AC .... V
AgCdo 1500VA // 300W (DC) 30A 2x 10 7 0,8...1,1UN 2,2VA, 1,2W 18ms / 10ms 230, 110, 48, 24 A333/AC .... V 48, 24, 12 A333/ DC .... V
AC
50/60Hz
DC
10%
UC
50/60 Hz /
A 333
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
107
KAT 2008
Installation Relays
Staircase Lighting Timers Staircase Lighting Timers Staircase Lighting Timers AL1... AL3
DIN
E 120 A P
AK
AL1
Staircase Lighting Timers
Trigger status indication Manual-Auto switch Test voltage: 2500V Tamb. operation/storage: -45..+60 / - 45..+85C
AL2
Staircase Lighting Timers
With special contact for high lamp loads 120A special early make contact Glow lamp load with AC 30s-10min running time, infinitely adjustable subsequent time operation from zero Manual ON
AL3
Staircase Lighting Timers
With stepping switch functions LS and S 120A special early make contact Glow lamp load with AC 30s-1h running time, infinitely adjustable subsequent time operation from zero Manual ON
Time Range
and otheres:
www.comat.ch
Function/Triggering
B1
MAX MIN
(120A peak)
L
L 10 A 10mA L
L
L 10 A 40mA
L LS S
10 A 40mA
L LS S
Y1 Y2 Y2 Y3
t t
A1 17 B1 R
A1 17 R 18 18
N
B1 B1
A1 17 B1 Y1 Y2 Y3 R
18 18 A2
1200W N
A2 A2
18 18
N
Y4 Y5 A2
2000W N
1200W
Contact material Switching power AC1 // DC1 Peak inrush current Switching cycles mech./elec. (AC1) Operating voltage AC50Hz/DC Power consumption AC/DC Triggering delay / release time Glow lamp load
W+AgSnO2 2200VA // 440W (DC) 120A /20ms 3x 10 7 0,85...1,1UN 2,5VA 50ms / 300ms 10mA 220-240, 110-127 AL1/AC .... V
W+AgSnO2 2200VA // 440W (DC) 120A /20ms 3x 10 7 0,85...1,1UN 2,5VA 50ms/ 300ms 40mA 220-240, 110-127 AL2/AC .... V
W+AgSnO2 2200VA // 440W (DC) 120A /20ms 3x 10 7 0,85...1,1UN 2,5VA, 1,5W 60ms/ 300ms 40mA 220-240, 110-127, 48-60 AL3/AC .... V 24 AL3/ UC .... V
AC
50/60Hz
UC
50/60 Hz /
108
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
DIN
Staircase Lighting Timers Staircase Lighting Timers Power Step-on Step-off for central control for central control Relay for central control
E 120 A P AK
AL4
Staircase Lighting Timers
Trigger status indication Electronic switch position indication Test voltage: 2500V 1500V Tamb. operation/storage: -20..+60 / - 40..+85C
AL4 C
Staircase Lighting Timers
Two-way lighting control on-off, stepping switch 120A special early make contact AC supply for glow lamp 30s-1h running time, infinitely adjustable subsequent time operation from zero Manual ON
AL5
Power Step-on Step-off Relay
Stepping switch funct. S Central ON-OFF 120A special early make contact Output status Neon lamps by AC control (Push button illumination up to 40mA for glow lamps resp. LEDs)
3
L
Time Range
and otheres:
www.comat.ch
Function (Page) /Triggering AL4 AL4C
B1
MAX MIN
10 A 250 V A
10 mA 12 V
(120A peak)
L LS S
L
40 mA CENTRAL RESET AUTO
L LS S
L
40 mA 24 - 60 V UC RESET AUTO
S
L
40 mA CENTRAL CENTRAL
LS S
AL5
Y2 Y3
A1 17 B1 R
B1 C1 C2
C1 C2
A1 17 B1 C C1 C2 R 18 18 Y1 Y2 Y3 A2
N 2000W N
A1 11 B1 R 12 12
N
C1 C2
C1 C2
18 18 Y1 Y2 Y3 A2
N 2000W
A3 A2 A2
2000W
A3 A2 A2
R
Data at Tamb =20 C
Contact material Switching power AC1 // DC1 Peak inrush current Switching cycles mech./elec. (AC1) Operating voltage AC50Hz/DC Power consumption AC/DC Triggering delay / release time Glow lamp load
W+AgSnO2 2200VA // 440W (DC) 120A /20ms 3x 10 7 0,85...1,1UN 2,5VA, 1,5W 60ms/ 300ms 40mA 220-240, 110-127, 48-60 AL4/AC .... V 24 AL4/ UC .... V
W+AgSnO2 2200VA // 440W (DC) 120A /20ms 3x 10 7 0,85...1,1UN 2,5VA 60ms/ 300ms 40mA 220-240, 110-127 AL4C/AC .... V
W+AgSnO2 2200VA // 440W (DC) 120A /20ms 3x 10 7 0,85...1,1UN 2,5VA, 1,5W 60ms/ 300ms 40mA 230, 48-60 AL5/AC .... V 24 AL3/ UC .... V
AC
50/60Hz
UC
50/60Hz /
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
109
KAT 2008
Y1 Y2
+
t
+
OFF
ON
ON
ON
OFF
ON
Installation Relays
Contactor 20 A
2NO or 2NC or 1NO/1NC
Contactor 25 A
4NO or 4NC or 2NO/2NC
Contactor 40 A
4NO or 4NC or 2NO/2NC
Contactor 63 A
4NO or 2NO/2NC
AUX Block
2NO or 2NC or 1NO/1NC
NO NOI
SE!
TS 35
RIC 20
AC/DC Istallation Contactors No noise!
All contacts doublemake/ doublebrake Mechanical status display Test voltage: 4kV/3 Tamb. operation/storage: -20..+55/ - 30..+80 C MAX MIN
RIC 25
Contactor 25 A
Contactor with 4NO or 4NC or 2NO+2NC contacts. UC (AC/DC) versions are noise free and do not need external freewheeling circuits. No coil inrush overcurrent. Sealing cover optional.
RIC 40
Contactor 40 A
Contactor with 4NO or 4NC or 2NO+2NC contacts. UC (AC/DC) versions are noise free and do not need external freewheeling circuits. No coil inrush overcurrent. Sealing cover optional.
RIC 63
Contactor 63 A
Contactor with 4NO or 2NO+2NC contacts. UC (AC/DC) versions are noise free and do not need external freewheeling circuits. No coil inrush overcurrent. Sealing cover optional.
RIC-AUX
Auxilary
Contactblock with 2NO or 2NC or 1NO+1NC contacts. For signalling and control applications up to 6 A with crown twin contacts. For all RIC contactors.
Contactor 20 A
Contactor with 2NO or 2NC or 1NO+1NC contacts. UC (AC/DC) versions are noise free and do not need external freewheeling circuits. No coil inrush overcurrent. Sealing cover optional.
and others:
20 A 400 V A
10mA 24V 1 A1 3
25 A 400 V A
10mA 24V 1 3 A1 5 7
40 A 400 V A
10mA 24V 1 3 A1 5 7
63 A 400 V A
10mA 24V 1 3 A1 5 7
6 A 400 V A
5mA 24V 51 61
www.comat.ch
2 R1
A2 A1
R2 R3
R2
A2 A1
R4
R2
A2 A1
R4
R2
A2
R4
52
62
R1 R3
R5 R7
R1 R3
R5 R7
51 61
R2
Data at Tamb =20C
A2
R4
R2 R4
A2
R6
R8
R2 R4
A2
R6
R8 AgSnO2 63A 400V 8,5kW/230V 40kW/400V 120 1x105 0,85 - 1,1 U N 5W 20ms // 35ms 24, 230 RIC63-400/UC ..... V 24, 230 RIC63-220/UC ..... V
Contact material Switching current I TH Switching voltage Switching power AC3 Switching power AC1/AC7a Op Frequenz max. cycle/hr Electrical life cycles AC1 Coil voltage range Power consumption Operate / release time typ.
AgNi 20A 400V 1,3kW/230V 4kW/230V 600 2x105 0,85 - 1,1 U N 2,5W 20ms // 20ms 24, 230 RIC20-200/UC ..... V 24, 230 RIC20-110/UC ..... V 24, 230 RIC20-020/UC ..... V
AgNi 25A 400V 2,2kW/400V 16kW/400V 600 2x105 0,85 - 1,1 U N 3W 10ms // 50ms 24, 230 RIC25-400/UC ..... V 24, 230 RIC25-220/UC ..... V 24, 230 RIC25-040/UC ..... V
AgSnO2 40A 400V 5,5kW/400V 26kW/400V 120 1x105 0,85 - 1,1 U N 5W 20ms // 35ms 24, 230 RIC40-400/UC ..... V 24, 230 RIC40-220/UC ..... V 24, 230 RIC40-040/UC ..... V
UC
A 50/60 Hz / D
RIC-AUX20
UC
A 50/60 Hz / D
RIC-AUX11
UC
A 50/60 Hz / D
RIC20 RIC25-63
RIC-AUX02
Ordering example Installation contactor RIC25-400/UC230V Aux block RIC-AUX20 Sealing cover RIC-SEAL20
Function Page: 52
RIC20
RIC25
TS35
85
RIC-AUX
110
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
45
RIC40 RIC63
Monitoring Relays
Voltage Monitoring Current Monitoring Mains Monitoring Isolation Monitoring Thermo Protection Relay
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
111
KAT 2008
Monitoring Relays
Monitoring Relays
Co nta c Se rie s t et
Voltage Monitoring
Undervoltage Monitor Undervoltage Monitor Overvoltage and Undervoltage Monitor DC Voltage Monitor AC or DC Voltage Monitor Precision DC Voltage Monitor RMS Precision AC/DC Voltage Monitor
So ck
DIN 35
SSU7...
Current Monitoring
Overvoltage Monitor Undervoltage Monitor Overvoltage and Undervoltage Monitor Current Transformer DC Current Monitor (200 mA) DC Current Monitor (2 A) DC Current Monitor (6A) AC or DC Current Monitor
8 A 124
Mains Monitoring
Three-phase Monitor (50 Hz) Three-phase Monitor (50 Hz) Three-phase Monitor (60 Hz) Phase-sequence Monitor
Isolation Monitoring
Isolation Monitor
ESU-D2
DIN 35
5 A 130 5A
TSR19
5A 132 5A
112
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Pa ge
Monitoring Relays
Voltage Monitoring
4
V
V V
DIN
11
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
113
KAT 2008
Monitoring Relays
V
and otheres: www.comat.ch
Undervoltage Monitor
MV 52 (50Hz) MV 62 (60Hz)
al ok 12 12
A2
A1
L N
13mm
MV52 (50Hz), MV62 (60Hz)
U SET (V)
supply
14 11 12
gn ye
VA
t t
gn
ok
fail rd alarm
al
rd
The MV52 (50Hz) or MV62 (60Hz) protects control systems, contactors and motors during undervoltage against thermal overload and malfunctions. The monitoring can be set precisely in volts from U N 30% up to U N. The switching off or on again follows delayed by 0,1/0,5 or 1second. 2 LEDs show the definite monitoring status.
ok
V Setting range Hysteresis t (fail-al-ok) Switching current/voltage Switch rating Mechanical switching cycles
Data at Tamb. = 20 C
BS13-K BS13-G
(incl.paper)
TS35
45
90
Order-Nr.
11
14
50 Hz
11 44 13
60 Hz
MV62 /AC120 V
BS13-G BS13-K
114
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
V
and otheres: www.comat.ch
MV 53
+ 0%
230V 115 V
236V 118 V
241V 121V
247V 124 V
253V 127 V
258V 129 V
265V 132 V
270V 135 V
al
ok
A2 A2 A1
230V 115 V 219 V 109 V 207V 103 V 195 V 97V 184 V 92V 173 V 86V 161V 80V 150 V 74V
L N
V O1 V O2 V NOM V U2 V U1
HYST.
HYST.
tO
ok al
fail rd
tR
ok
tO
tR
The MV53 (50/60Hz) protects single phase consumers in AC networks from over- and undervoltage. Overvoltage and undervoltage thresholds can be set independently in percentage of the nominal voltage using two DIP-switches (see diagram above). Using a potentiometer allows setting an alarm delay of 25ms...2,5s. A two-colored LED shows the definite monitoring status.
11
supply
14 12
al
gn
ok
ye
alarm
4
V Setting range overvoltage Setting range undervoltage Hysteresis t O Alarm delay t R Reset time Switching current/voltage Switch rating Mechanical switching cycles
Data at Tamb. = 20 C
987
65
TS35
90
Order-Nr.
50/60 Hz
70
22,5
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
115
KAT 2008
Monitoring Relays
MV53
12 11 14
32
10
V
and otheres: www.comat.ch
DC Voltage Monitor
CT 524
Socket C12B0
Relay C32/DC24V
Type CT524.2/DC24V
Module CT524/DC24V
CT524
2 1
supply
9 8 7 5 3 4
2 CT B1 A1
10 11
6 V in
1 12 2
MAX
+
R
t R fail
ok al
DC24V
MIN
tR
R
fail ok al
t
Alarm delay t Reset time t R Switching current/voltage Switch rating Mechanical switching cycles
Data at Tamb. = 20 C
INT
0,1/0,5/2s 100ms
t
R
tR
t R fail
ok al
6A 250V A 1500VA/...200W 100 x10 6
EXT
tR
R
gn ok ye fail rd
tR
fail ok al
alarm
Accessories
Socket 0-30 V
Socket and Accessories: Page 97
C12 B0
40 V
CT 524.2 / DC24 V
116
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
V
and otheres: www.comat.ch
Voltage Monitoring AC or DC
CUEBU
L N (+) U
AC 15 ...480 V DC 15 ...700 V
Ri 1M
2 4 6
10
8A 250V A
Functions
Up
Hys
CUEBU 15 -700
Monitoring Relay
for AC or DC voltages ranging from AC15...480V, DC15...700V. LCD display for the measured value and the parameter setting. LED indication for the alarm status. Snap on to DIN-rail TS35 conform DIN (43880).
[V]
Up
t1
fail ok al M
R
Supply
[V]
Hys
Lo
Lo
t1
fail ok al M Up [V] Lo
4
V
Data at Tamb. = 20 C
R
Supply
Hys
Up / Lo
t1
t1
fail ok al M
t
Alarm delay time t1 Switching current/voltage Switching power AC1 Output contact
R
Supply
gn
ok
ye
fail
rd
alarm
AC230V +10%; -15% 50/60Hz 4,5VA/2,5W 3kV rms /1min -20...+55 C /-40...+70 C
Order-Nr.
50/60 Hz
CUEBU15-700 / AC 230 V
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
117
KAT 2008
Monitoring Relays
V
and otheres: www.comat.ch
RL
9 8 7 5 3 4
DC 10-32V
Um
()
L+ N
10 11
6 1 2
35 mm
FAIL OK OK FAIL
supply
t fail
t ok
normal fail delay alarm
11
9 8
ye rd
ok al
meas. alarm
50mA
(+)
gn
ok
9
0 - 210mV 0,1 - 200mV 0,5mV
2
0 - 38V 0,1 - 35V 20mV
5
0 - 157V 40 - 150V 100mV
6
0 - 285V 0*/50 - 270V 0,5V *SSU76
Switching current/voltage
Example of order SSU DC 0-38V/UC24-48V: SSU23/UC24-48V SSU RMS AC/DC 0-200mV/UC110-240V: SSU79/UC110-240V
Attention: P/O numbers of several devices were changed (refer below). Devices are identical. Old number: SSU11/UC110-240V SSU11/UC60-127V SSU11/UC24-48V SSU11/UC12-15V
Socket and Accessories: Page 97
118
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Monitoring Relays
Current Monitoring
4
A
A
DIN
1 1
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
119
KAT 2008
Monitoring Relays
A
and otheres: www.comat.ch
LOAD 2
2
OP JUST LO
IT
Setting ranges
[A]
1x 2x 3x 4x 5x
-05 0,5-6 0,25-3 0,17-2 0,13-1,5 0,1-1,2 -30 2,5-30 1,25-15 0,83-10 0,62-7,5 0,5-6 -60 5-60 2,5-30 1,7-20 1,25-15 1-12
EOCR-AR EUCR-BR
A A tO
supply
tO
tR
1/2
L (+) U B N
al
SCHTZ CONTACTOR
15
18 16
gn ok ye fail rd
ok al
alarm
EOCR-AR / EUCR-BR
1 fail
or
2 fail
= FAIL
The EOCR-AR and the EUCR-BR monitor overcurrent and undercurrent on AC power circuits. One or two current paths can be monitored directly up to 60(75)A, by means of the integrated current loop transformers. The adjustable alarm delay ( t O) and the automatic alarm resetting ( t R) permit universal usage in motor and transformer protection systems, monitoring of electrical heating elements and in the control of pumps, ventilation systems, suction and feed devices. The nominal monitoring range in the 3 types -05/-30/-60 can be altered by multiple looping of the conductor (see schedule above).
al ok
A2 A1 15 16 18
+L
N
t
Alarm delay t O Reset time t R Switching current/voltage Switch rating Mechanical switching cycles
Data at Tamb. = 20 C
Order-Nr.
16
10 10
AC
50/60 Hz
UC (AC/DC)
05 30 60
20
05 30 60
A1
15
16
EOCR-AR- ... / AC 230 V EOCR-AR- ... / AC115 V EUCR-BR- ... / AC 230 V EUCR-BR- ... / AC115 V
EOCR-AR- ... / UC 24 V
EUCR-BR- ... / UC 24 V
62
54
120
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
A
and otheres: www.comat.ch
ECR-3D
Setting ranges
-05 -60
L1
L2
[A]
1x
2x
3x
4x
5x
L3
-05 0,5-6,5 0,25 - 3,2 0,17- 2,1 0,13-1,63 0,1-1,3 -60 5-75 2,5-38 1,7-25 1,25-18,8 1-15
L1 or L 2 or L 3
0 U
L1+L 2 +L 3 off
A A
tO
supply
tO tR tR
R1 R2
L U B (+) N
15
18 16 28 26
gn ok ye fail rd alarm
25
ECR-3D
1 fail
or
2 fail
or
3 fail
= FAIL
The ECR-3D is for monitoring overcurrent and undercurrent on AC power circuits. Three current paths of up to 60(75)A can be monitored directly by means of the inte-grated current loop transformers. The adjustable alarm delay ( tO) and the automatic alarm resetting ( tR) permit universal usage in automation and protection techniques. The set values are displayed automatically by setting the respective parameters. Triggered faults remain stored and displayed until reset.
R2
+
R1
al ok
al ok
A2 A1 26 25 28 16 15 18
+L
N
4
t
Alarm delay t O Reset time t R Switching current/voltage Switch rating Mechanical switching cycles
Data at Tamb. = 20 C
( L1)
( L2)
( L3)
16
10
10
10
Order-Nr.
21
UC (AC/DC)
A2 A1 26 25 28 16 15 18
30
05 60
71
70
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
121
KAT 2008
Monitoring Relays
Current Transformers
and otheres: www.comat.ch
SRCT-35
Current transformers of the SRCT-35 series transform high AC currents into proportional secondary current in the ratio 10:1 (type -50) up to 100:1 (type -500). With accuracy class 1, coupled with a large power reserve (PN: 2,5VA) and high overload capacity up to 150%, the SRCT-35 is the ideal transformer for general applications and for the use with Comat monitoring relays ..AR, ..BR, ..3D.
10
BEF 1
k
86
35
Direct mounting
Order-Nr.
UC (AC/DC)
FOR M4 38 40 4.3 3
SRCT-35 - ... / 5 A
4,5 50 76 2 65
122
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
A
and otheres: www.comat.ch
DC Current Monitor
(200 mA) (2 A) (6 A)
Socket C12B0
Relay C32/DC24V
Type CT512.2/DC24V
Module CT512/DC24V
CT512,515,516
2 1
supply
9 8 7 5 3 4
2 CT B1 A1
10 11 RL
6
in
1 12 2
MAX
+
R
t R fail
ok al
DC24V
MIN
tR
R
fail ok al
t
Alarm delay t Reset time t R Switching current/voltage Switch rating Mechanical switching cycles
Data at Tamb. = 20 C
INT
0,1/0,5/2s 100ms
t
R
tR
t R fail
ok al
6A 250V A 1500VA/...200W 100 x10 6
EXT
tR
R
gn ok ye fail rd
tR
fail ok al
alarm
Accessories
C12 B0
300 mA 3A 7A
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
123
KAT 2008
Monitoring Relays
A
and otheres: www.comat.ch
Current Monitoring AC or DC
CUEBI
L N (+) U
2 4 6
10
8A 250V A
Functions
Up
Hys
CUEBI01-10
Monitoring Relay
for AC or DC currents ranging from 0,1A up to 10A with start-up delay. LCD display for the measured value and the parameter setting. LED indication for the alarm status. Snap on to DIN-rail TS35 conform DIN (43880).
[A]
Up
t2
t1
fail ok al M
R
Supply
[A]
Hys
Lo
Lo
t2
t1
fail ok al M Up [A] Lo
R
Supply
Data at Tamb. = 20 C
Hys
Up / Lo
t
Alarm delay time t1 Start-up delay t 2 Switching current/voltage Switching power AC1 Output contact
t2
t1
t1
fail ok al M
R
Supply
gn
ok
ye
fail
rd
alarm
Operation voltage AC50/60Hz Power consumption P max Isolation Temperature: operating / storage
AC230V +10%; -15% 50/60Hz 4,5VA/2,5W 3kV rms /1min -20...+55 C /-40...+70 C
Order-Nr.
50/60 Hz
124
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Monitoring Relays
Mains Monitoring
4
3
DIN
11
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
125
KAT 2008
Monitoring Relays
3
and otheres: www.comat.ch
SSU33 (50Hz)
1)
230V ( )
2)
400V ( )
6 A 250 VA 1500 VA/ ...270 W
ok alarm
L1 L2 L3 N 10
1) 2)
<
MIN
U
FIX
>
MAX
1 0,2 - 5 s ok al
t del
2
11 9 2
U, ,
PHASE SEQUENCE
7 4 5
SSU33L
The SSU33 (50Hz) provides comprehensive monitoring of three-phase mains supplies with or without neutral. The following mains faults are monitored: Error signal 1 U (V , V ): Exceeding or dropping below the fixed voltage values Umin/Umax for L1-N or L1-L2 (no differential voltage, phase position or frequency fault). Error signal 2 U, , : One or more of the three voltages, phase positions, phase sequence or the mains frequency are diverging from the required value. Depending on the nature of their occurrence -errors are evaluated cumulatively. Any error is signalled by the red LED and is reported after expiry of the set alarmdelay time ( t del 0,2...5s) via 7-4-5. In the correct status (ok) the green LED is illuminated (4-5 open, 4-7 closed).
3x 230 (400) V
1)
3x 400V
2)
L1 N L2 L3
L1 L2 L3
U
1
U U U U U U
/ Order no.
> 275V
> 480V
< (U min)
2
<160V
20 - 100V 35 - 173V 3-15/3-15Hz SSU33L/AC230V
< 280V
20 - 100V 35 - 173V 3-15/3-15Hz SSU33L/AC400V
Differential range
75
C11A
Socket and Accessories: Page 97
38
126
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
3
and otheres: www.comat.ch
<
N oder or L L3 L2 L1
MIN
MAX
1
t del
2 0,2 - 5 s
ok
al
fail red gn
ok alarm
U, ,
PHASE SEQUENCE
3
4 5 6 3 7 8
E The SSU34 (50Hz) and the SSU36 (60Hz) provide comprehensive monitoring of three-phase mains supplies with or without neutral. The following mains faults are moni-tored: Error signal 1 U (V , V ): Exceeding or dropping below the set voltage values Umin/Umax for L1-N or L1-L3,L (no differential voltage, phase position or frequency fault). Error signal 2 U, , : One or more of the three voltages, phase positions, or the mains frequency are diverging from the required value. Depending on the nature of their occurrence errors are evaluated cumulatively. Error signal 3 : Connection polarity reversal (wrong phase-sequence). Any error is signalled by the red LED "fail" and is reported after expiry of the set alarm-delay time ( t del 0,2...5s) (for error signal 3 undelayed) via 5-6 and 7-8. In the correct status (ok) the green LED is illuminated (5-6 and 7-8 open, 5-4 and 7-2 closed).
50Hz U
1
50Hz
230/400VA 235-275V 410-480V 160-225V 280-390V 20-100V 35-173V 3-15/3-15Hz SSU34 /AC400V
50Hz
290/500VA 300-350V 520-600V 200-280V 350-485V 20-100V 35-173V 3-15/3-15Hz SSU34/AC 500V
60Hz
120/208V A 125-145V 216-250V 85-115V 148-200V 10-50V 17-87V 5-24/3-22Hz SSU36/AC208V
60Hz
265/460V A 270-320V 470-550V 185-260V 322-450V 20-100V 35-173V 4-21/ 3-19Hz SSU36 /AC 460V
60Hz
277/480V A 284-232V 490-575V 194-270V 336-470V 20-100V 35-173V 4-21/ 3-19Hz SSU36 /AC480 V
U U U U U U
/ Order no.
Differential range
Detachable Terminals
105
75
50
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
127
KAT 2008
Monitoring Relays
MAIN
ITORI N O M S
NG
SSU34, SSU36
>
SSU34/36
3
and otheres: www.comat.ch
SSU31
L1 L2 L3
Failure of L2 or L3 cannot be displayed (LED)!
SSU31
U
supply
7 4 5
gn ye
200ms
50ms
gn
ok
fail rd alarm
al
rd
The SSU31 serves as a phase-sequence, three-phase undervoltage and phase failure monitor. The monitoring function helps to ensure the correct rotation direction of pumps, motors and conveyors in mobile devices with connection to different power outlets. The defined undervoltage and phase failure protects against malfunction and damage caused by overheating.
9 8 7 5 3 4
ok
10 11
al
6 1 2 L1 L2 L3
ok
Data at Tamb. = 20 C
Order no.
50/60 Hz
Accessories Relay socket Retaining clip Front mounting C11A HF-24 FZ-23
128
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Monitoring Relays
Isolation Monitoring
DIN
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
129
KAT 2008
Monitoring Relays
Isolation Monitor
and otheres: www.comat.ch
ESU-D2
ESU-D2
30k
supply
t del
t del
tR
1s
tR
1s
4k (Fix)
18 16
(38)
AL2
LEDs
(37)
25
gn
28 26
ok
ok
4k 30k
ye Scale
al
Trend
rd gn ye rd
al
ok meas. alarm
ESU-D2
The ESU-D2 monitors the isolation resistance in non-grounded DC-networks (24-48V D). Two alarm steps (prealarm AL1 and main alarm AL2) are indicated via separate output contacts. Settable alarm delay ( tdel): 0,1-10sec. Displays: bargraph-display of the measured earthing resistance 4...30k (green = ok). Two red LEDs show the ground tendency towards plus (+) or minus ( ). Measuring terminal 5V for the external display of the earthing resistance (0,1V/k ). Test functions: Periodic automatic check, also with key Test. Environmental failures: monitoring of AC-short circuit, overvoltage, ground interruption.
DC 0..52V
E
0,1V/k
V
5V
Pre alarm
AL1
15 16 18
+
Data at Tamb. = 20 C
E2
+
0,1V/k
AL1 AL2
Measuring range Error of measurement Setting range AL1/AL2 Time of error-detection Alarm delay time settable Voltage stability + or /earth
ESU-D2
L E1 25 26 28 37 38
L (+) UB N
AL2
Main alarm
Detachable Terminals
75
Order no.
UC (AC/DC)
ESU-D2 / UC110-240 V ESU-D2 / UC 24-48 V
105
50
130
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Monitoring Relays
4
C
M
1 1
Comat products comply with different international standards and are certified accordingly. A detailed list can be found on our web page:
www.comat.ch
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
131
KAT 2008
Monitoring Relays
C
and otheres: www.comat.ch
TSR19
or
TSR 19
R PTC /
supply
1-3 11-9
gn ok ye
-SWITCH
RESET
gn
ok
fail rd alarm
al
rd
The TSR19 is intended to monitor the temperature of motor coils, generators and transfomers. It detects the temperature of the windings over the change in resistance of the PTC thermistors 1 or the position of the thermo switches 2 . The circuit is designed to detect a break in the continuity of the detection circuit and ground failures. On position PTC, line or sensor fault is also detected. Reset after failure detection: Press reset button or interrupt supply voltage for >200ms.
PTC
Sensor
Thermo Switch
9 8 7 5 3 4
al
A2
ok
A1
10 11
Data at Tamb. = 20 C
6 1 2
Sensor resistance R ok Sensor wire R max Error-detection R fail Sensor supply U 5-7 Sensor supply 5max
100..1800 ; 0..1800 20 R fail >2200 15V / R sens 3mA 5A 250V A 1250VA/...180W 30x10 6
75
Order no.
Accessories
UC(AC/DC)
50/60 Hz
TSR19 / UC 24 -48 V
132
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
5
SMS Relay Miniature Controller, Comat BoxX
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
133
KAT 2008
Notes
134
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Automation Products
SMS Relays
5
Monitoring of all inputs and outputs with SMS messaging Remote control of outputs by SMS Sequential alert messaging to 5 different subscribers Easy conguration with PC and FAST SMS SET-up conguration software Power failure notication by SMS messaging Status change messages by SMS User dened message text
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
135
KAT 2008
CMS -10
136
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
CMS-10
Technical Datas
AC 110 -240 V A 50 /60 Hz 8 VA / 6 W 4x 10 A 250 V Tu: -25 ...+55 C Rel. humidity: 5 ...95 % (non condensing) Protection IP 20 6 x digital trigger level 85 V a 4 x CO contacts User selectable (dependent on SIM card)
DC 12- 48 V D 6W
max. 10 %
5
6 x digital trigger level 9,5 V d
Dimensions
Antenne
137
KAT 2008
Order-Nr.
Type CMS -10 /AC110-240 V CMS -10 /DC12-48V Description SMS Relay AC 110 -240 V Base unit only with small antenna (CMS-ANT) SMS Relay DC 12-48 V Base unit only with small antenna (CMS-ANT)
KIT consisting of: A base unit with small antenna, antenna with magnetic pod and 2.5 m cable, programming cable, USB-RS232 Interface connector, CD with FAST SMS SET-up programming software and operation manual CMS -10 KIT /AC110-240 V CMS-10 KIT/DC12-48V Accessories CMS -RS 232 CMS -USB CMS -ANT CMS -ANT -MAG / 2.5 M CMS -ANT -SPEZ / 5 M CMS -ANT -KAB /5M CMS -ANT -KAB /10 M CMS -ANT -ADAPT CMS -CAP CMS -CD SMS Relay Programming Cable RS232 USB-RS232 Interface connector (including driver CD) Small spare antenna for base unit, 63 mm long Antenna with magnetic pod and 2.5 m antenna cable External antenna with 5 m antenna cable Antenna cable 5m (extension) Antenna cable 10 m (extension) Adaptor FME to SMA plug Device cover (spare) CD with FAST SMS SET -up programming software and manual Installation kit complete (SMS Relay AC110 -240V) Installation kit complete (SMS Relay DC12- 48 V)
Installation note
Antenna with magnetic pod and 2.5 m antenna cable. Type: CMS-ANT-MAG/2.5M The Base unit device is delivered fully operational and includes the small aerial CMS-ANT. Before installation, the nal location of installation must be taken into consideration. For installation inside a control panel, the small device aerial may not be suitable and needs to be replaced by the antenna with magnetic pod (CMS-ANT-MAG/2.5M) or by the external antenna (CMS-ANT-SPEZ/5M). These two antennae provide considerably better results and improve communication with the mobile network. Please ask our product specialists if you require any support.
138
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Automation Product
1 2
DC 24VD or
0-10V
DC12-24V D
BoxX
BoxX
ESC POW REC
+
OK VOL
MIC
DISPLAY UNIT LCD
AF-MUL/DC12-24V D
REL
8A 250V
4
PC
1 2 EXT SPK
3 4 WAV
PC
Programming via PC Remote controlling and voice message over telephone network or Cellular phone Remote maintenance and remote operation of the installation Comprehensive function block library Password protected
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
139
KAT 2008
BoxX
The Controller
127
digital / analog
Type LCD
Program storage 64 kByte Time range 0,01s - 99,99 h Counting values 1- 999999 (up to the year 2099) System timer back up 100 h
PC
Type CAP
+ +
DC 24V D
6 / 12 Inputs
NET
1 2
DC 24VD or
0-10V
AC110 -240 V A
1 2
AC110-240V A
BoxX
BoxX
BoxX
ESC
POW REC
+
OK
VOL
MIC
COVER
CAP
AF-MUL/AC110-240V A
+1
+ 2 PNP + 3 2A + 4 24V D
REL
8A 250V
4
PC
1 2 EXT SPK
3 4 WAV
4 / 8 Outputs
Relay / Transistor
active
PC
140
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
BoxX
The Application
The Comat BoxX can be programmed by PC or with the snap-on LCD display with integrated function keys. It is possible to modify time intervals of the function blocks in the existing control program on site directly on to the installation. The LCD display can be connected to the Comat BoxX to visualize conditions or may be removed (without voltage) and used on another Comat BoxX. The 24 V versions of the Comat BoxX can also process analogue signals 0...10 V with increments of 0.1V . All inputs can be used or configured at random as analogue or digital inputs. Function blocks for the comparison of analogue values are available, i.e. to monitor temperature in a heating system.
BoxX
ESC
5
C
0 0 0 0 0 0 0 0
OK
0 1 2
Programming software
5
The programming software QUICK II allows easy and transparent programming of the Comat BoxX with a PC. QUICK II is based on Windows . 127 function blocks can be stored inside the program memory of the Comat BoxX. Stored programs cannot be lost even during a power loss. Therefore back up batteries are not needed. With the simulation tool, the set up can be tested on the PC before commissioning. Example: Page 4 Control tasks can be solved easily with the function blocks available in the library. Programming codes in a high-level program language are not required. Simply place the corresponding function blocks and link them with other function blocks according to the required control function. The voice module allows the playing of messages through either the built-in or external loud speakers. The voice module also replays phone calls or dials phone numbers to send emergency or status messages. Messages are recorded directly over the built-in microphone or are transferred as *.wav files directly from the PC.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
141
KAT 2008
Analogue inputs
4 3 2 1
BoxX
142
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
BoxX
NET
AF-BC
AF-BC
AF-MUL
Incl. AF-BC AF-ATL
PC EXT SPK WAV
AF-MUL
Incl. AF-BC AF-ATL
BoxX
BoxX
AF-ATL AF-RS232
AF-AUD
PC
PC
PC
Each Comat BoxX can be controlled via a telephone line if connected to the extension module AF-MUL (voice & remote unit). The AF-MUL will answer calls and allows access after the password is accepted. The Comat BoxX with the AF-MUL is able to broadcast up to 98 predefinded conditions, for example alarms, over the phone network. The designated phone number is dialled and the recorded message is played over the telephone. The message can also be broadcast over auxiliary loudspeakers.
Messages are transferred to the voice module as *.wav files directly from the PC over the AF-AUD cable.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
143
KAT 2008
AF-RS232
AF-D232
BoxX
The Types
UB
6 INPUTS 4 OUTPUTS
AC 110 -240 V A INPUT 1 2
UB
12 INPUTS 8 OUTPUTS
AC 110 -240 V A INPUT 1 2
AC 110 -240 V 50 / 60 Hz 6 /12 Inputs digital AC110 -240 V 4 / 8 Ouputs relays 8 A 250 V A
AC 110 -240 V 50 / 60 Hz 6
L N N UB
6x
BUS OUTPUT
L N N UB
12 x
BUS OUTPUT
12
BoxX AF-10MR-A-...
RELAY 8A 250V
BoxX AF-20MR-A-...
RELAY 8A 250V
Q1
Q2
4x
Q4
Q1
Q2
8x
Q8
Order no.
without display AF-10 MR-A-CAP/AC 110-240 V with display AF-10 MR-A-LCD/AC 110-240 V
DC 24V D 6 /12 Inputs configurable: digital / analog 0 -10 V (0,1V) 4 / 8 Outputs relays 8 A 250 V A
DC 24V D or 1 2
0-10V 6
DC 24V D
DC 24V D or 1 2
0-10V 12
INPUT
INPUT
++
6x
BUS OUTPUT
++
12 x
BUS OUTPUT
BoxX AF-10MR-D-...
RELAY 8A 250V
BoxX AF-20MR-D-...
RELAY 8A 250V
Q1
Q2
4x
Q4
Q1
Q2
8x
Q8
Order no.
4 / 8 Transistor outputs PNP 2 A 24 V D
PNP 2A 24V D
+
Q1
+
Q2
OUTPUT +
4x
Q4
PNP 2A 24V D
+
Q1
+
Q2
OUTPUT
+
Q8
8x
Order no.
Order no.
Voice and remote unit
1)
Programming cable Converter USB-RS 232 Modem Modem Interface connector Display with function keys Cover (instead of AF-LCD) CD-ROM
AF-MUL Programming cable AF-MUL Bridge connector 2) AF-5MUL Audio Cable Audio Cable
2)
AF-10
AF-20
max.10 % 5 VA /1,5 W 2 A 24 V D
AF- MUL
AC110 -240 V A DC 12-24 V D 0,8 VA
The Data
- 25 ... + 55 C
Tu with display Rel. humidity: 5 ... 95 % Protection 0 ... + 55 C (non condensing) IP20
144
KAT 2008
This edition replaces all previous issues. Availability, errors and specication subject to change without notice.
COMAT AG BERNSTRASSE 4 CH-3076 WORB SCHWEIZ www.comat.ch Tel. +41 (0)31 838 55 77 Fax. +41 (0)31 838 55 99 info@comat.ch
Comat worldwide
AUSTRALIA
OHMIC CONTROLS PTY LTD. www.ohmic.com.au
GERMANY
COMAT SAM STEUERUNGSTECHNIK www.comat-online.de www.releco-online.de KHN CONTROLS S.L. www.multicomat.de www.releco-comat.de
POLAND
ANIM EXPORT www.anim.com.pl
AUSTRIA
ELTAX GMBH www.eltax.at INTERMADOX GMBH www.intermadox.at
PORTUGAL
SALMON & CIA. LDA. www.salmon.pt
GREAT BRITAIN
CAMIS COMPONENTS www.camiscomponents.com
ROMANIA
SYSCOM 18 S.R.L. www.syscom.ro TURCK BRANCH OFFICE ROMANIA www.turck.ro
BELARUS
FEK COMPANY www.turck.by
GREECE
VASSILIS GETSOS (MEGA EL) getsosva@acci.gr
BELGIUM
MULTIPROX N.V. www.multiprox.be
RUSSIA HUNGARY
TURCK HUNGARY KFT. www.turck.hu SENSORLINK www.sensorlink.ru
BULGARIA
SENSOMAT GMBH www.sensomat.info
SINGAPORE INDIA
CONCORD AUTOMATION & CONTROLS www.cacindia.net MECOMB SINGAPORE LIMITED www.mecomb.com.sg
CANADA
CHARTWELL ELECTRONICS INC. www.chartwell.ca
SLOVAKIA
MARPEX S.R.O. www.marpex.sk
INDONESIA
PT.YABESTINDO MITRA UTAMA J.L. yabestindo-pt@yahoo.com
CHINA P.R.
ELCO (TIANJIN) ELECTRONICS CO. LTD www.elco-holding.com
SLOVENIA
TIPTEH D.O.O. www.tipteh.si
IRELAND
CAMIS COMPONENTS www.camiscomponents.com
CROATIA
VARGA ELEKTRONIK D.O.O. www.varga-elektronik.hr TIPTEH D.O.O. www.tipteh.si
SOUTH AFRICA
RET AUTOMATION www.retautomation.co.za
ITALY
S.P.I.I. SOCIET PER AZIONI www.spii.it
SPAIN KOREA
SAMWHA ENGINEERING CO. LTD. Korea Seoul www.samwha.co.kr RELECO S.A. www.releco.com
CZECH REPUBLIC
TURCK S.R.O. www.turck.cz
SWEDEN
BEVING ELEKTRONIK AB www.bevingelektronik.se
DENMARK
HANS FLSGAARD AS www.hf.net
LITHUANIA
HIDROTEKA www.hidroteka.lt
TAIWAN
E-SENSORS & AUTOMATION INTL CORP. www.e-sensors.com.tw
EGYPT
E.T.E. EGYPTIAN TRADING AND ENGINEERING CO. ete@internetegypt.com
MALAYSIA
ELECTRICAL MARKETING SDN. BHD. www.elemar.com.my
MAROCCO ESTONIA
OSAUHING SYSTEM TEST www.systemtest.ee CENELEC S.A. cenelec@cenelec.co.ma
THAILAND
SRINUTCH COMPONENTS CO. LTD. www.srinutch.com
NETHERLANDS
VIERPOOL B.V. www.vierpool.nl
TURKEY
CERAN AUTOMATION www.ceran.com.tr
FINLAND
KY VARESTE KB www.vareste.fi OEM FINLAND OY www.oem.fi
NORWAY
DANYKO A.S. www.danyko.no
UKRAINE
SENSORLINK www.sensorlink.ru
FRANCE
TURCK BANNER S.A.S. www.turckbanner.fr
PHILIPPINES
MANUEL H.M. MANUEL ENTERPRISES www.hmmanuel.com.ph
USA
WOERTZ-USA www.woertz-usa.com
cw/ 4.08
COMAT AG BERNSTR. 4 CH-3076 WORB TEL. +41 (0)31 838 55 77 FAX +41 (0)31 838 55 99 www.comat.ch info@comat.ch
GK08/ 6.08e EX