Beruflich Dokumente
Kultur Dokumente
The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started.
Electrotechnical
BS 581 ................................................................21 BS 1659 ..............................................................21 BS 1745 ..............................................................21 BS 2011 ..............................................................14 BS 3934 ..............................................................23 BS 5225 ..............................................................23 BS 8434 ..............................................................23 BS 9300 .................................................21, 22, 23 BS 9301 ..............................................................22 BS 9305 ..............................................................22 BS 9364 ..............................................................22 BS 9400 ..............................................................23 BS 9430 ..............................................................23 BS 9490 ..............................................................23 BS 9493 ..............................................................23 BS EN 13032 ......................................................23 BS EN 50085 ......................................................14 BS EN 50106 ......................................................14 BS EN 50200 ......................................................23 BS EN 50216 ......................................................14 BS EN 50408 ......................................................14 BS EN 50492 ......................................................14 BS EN 50521 ......................................................14 BS EN 60068 ................................................14, 24 BS EN 60079 ......................................................14 BS EN 60335 ................................................20, 24 BS EN 60384 ......................................................24 BS EN 60512 ................................................14, 15 BS EN 60519 ......................................................15 BS EN 60598 ......................................................15 BS EN 60704 ......................................................24 BS EN 60730 ......................................................24 BS EN 60793 ......................................................15 BS EN 60794 ......................................................15 BS EN 60851 ......................................................15 BS EN 60904 ......................................................15 BS EN 61000 ......................................................24 BS EN 61058 ......................................................24 BS EN 61162 ......................................................16 BS EN 61400 ......................................................16 BS EN 62227 ......................................................16 BS EN 62288 ......................................................16 BS EN 62305 ......................................................20 BS EN 62491 ......................................................16 BS EN 131800 ....................................................24 BS ISO 23273 .....................................................32 BS CECC 50000 ..................................................23 BS CECC 90000 ..................................................23 DD IEC/PAS 62137 ..............................................18 DD IEC/PAS 62562 ..............................................18 DD IEC/PAS 62587 ..............................................18 DD IEC/TS 61850 ................................................18 DD IEC/TS 62492 ................................................18 DD IEC/TS 62538 ................................................18 PD ES 59008 ................................................22, 23 PD 7639 .......................................................17, 24 PD CLC/TR 50378 ...............................................17 PD IEC/TR 60909 ..........................................17, 24 PD IEC/TR 62572 ................................................18 BS E9372 ............................................................24 BS E9375 ............................................................24
Engineering
BS BS BS BS BS BS BS 746 ................................................................19 949 ................................................................24 1127 ..............................................................24 1660 ..............................................................24 2452 ..............................................................21 3087 ..............................................................25 3628 ..............................................................23
BS 4062 ..............................................................25 BS 5315 ..............................................................20 BS 5341 ..............................................................25 BS 5449 ..............................................................23 BS 6148 ..............................................................25 BS 6798 ..............................................................10 BS 7275 ..............................................................25 BS 7570 ........................................................14, 23 DD CEN/TS 13388 ..............................................19 BS EN 115 ..........................................................10 BS EN 999 ..........................................................19 BS EN 1088 ........................................................19 BS EN 1093 ........................................................19 BS EN 1526 ........................................................19 BS EN 1550 ........................................................19 BS EN 1612 ........................................................20 BS EN 1886 ........................................................19 BS EN 1914 ........................................................10 BS EN ISO 4263 ..................................................26 BS EN ISO 6149 ..................................................26 BS EN ISO 7369 ..................................................26 BS EN 9101 ........................................................11 BS EN ISO 10407 ................................................11 BS EN ISO 10417 ................................................27 BS EN ISO 10424 ................................................27 BS EN ISO 10426 ................................................27 BS EN ISO 10427 ................................................27 BS EN ISO 10432 ................................................27 BS EN ISO 10447 ................................................27 BS EN ISO 11961 ................................................11 BS EN 12077 ......................................................19 BS EN ISO 12156 ................................................27 BS EN 12484 ......................................................27 BS EN 12734 ......................................................27 BS EN 12828 ................................................19, 23 BS EN 12831 ................................................19, 23 BS EN 13083 ......................................................11 BS EN 13597 ......................................................21 BS EN ISO 13625 ................................................27 BS EN ISO 13631 ................................................27 BS EN 13997 ......................................................27 BS EN ISO 14172 ................................................12 BS EN 14336 ................................................19, 23 BS EN ISO 14373 ................................................27 BS EN 15166 ......................................................12 BS EN 15194 ......................................................12 BS EN 15268 ......................................................12 BS EN 15316 ......................................................12 BS EN ISO 15465 ................................................28 BS EN 15620 ......................................................12 BS EN 15629 ......................................................12 BS EN 15635 ......................................................12 BS EN 15655 ......................................................12 BS EN 15800 ......................................................14 BS EN ISO 16432 ................................................28 BS EN ISO 16433 ................................................28 BS EN ISO 17078 ................................................28 BS EN ISO 21329 ................................................28 BS EN 29367 ......................................................28 BS EN 50504 ................................................14, 23 BS EN 60404 ......................................................20 BS ISO 525 .........................................................29 BS ISO 603 .........................................................29 BS ISO 1085 .......................................................29 BS ISO 1540 .......................................................29 BS ISO 2697 .......................................................29 BS ISO 2705 .......................................................29 BS ISO 2943 .......................................................29 BS ISO 3290 .................................................16, 17 BS ISO 3366 .......................................................29 BS ISO 3842 .......................................................29 BS ISO 3888 .......................................................29
Information systems
BS EN 14890 ......................................................12 BS EN 61158 ..........................................15, 16, 24 BS ISO/IEC 19757 ...............................................17 DD ISO/TS 25237 ................................................18 PD ISO/IEC TR 15504 ..........................................17
Management systems
BS 8848 ..............................................................19 BIP 2154 .............................................................24 BS EN 15696 ......................................................14 BS EN 15707 ......................................................19 BS EN 60027 ......................................................16 BS EN 62428 ......................................................16 BS EN 80000 ......................................................16 BS ISO 31 .....................................................17, 24 BS ISO 3534 .......................................................29 BS ISO 80000 ...............................................17, 24 PD 6668 .............................................................24
Please do not send confirmation of orders placed by telephone as it can lead to duplication
British Standards
NA to BS EN 1993:
UK National Annex (informative) to Eurocode 3. Design of steel structures
BRITISH STANDARDS
The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: 020 7467 7100 Fax: 020 7255 1472 Email: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members.
BS EN 200:2008
Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification supersedes BS EN 200:1992 which is withdrawn and BS 5412:1996 which is declared obsolescent ISBN 978 0 580 66665 0 84.00 members, 168.00 non-members
B/504/8
NA to BS EN 1993-1-10:2005
Material toughness and through thickness properties no current standard is superseded ISBN 978 0 580 54972 4 34.00 members, 68.00 non-members
B/525/31
BS EN 1409:2008
Chemicals used for water treatment intended for human consumption. Polyamines supersedes BS EN 1409:1998 ISBN 978 0 580 58027 7 60.00 members, 120.00 non-members
CII/59
NA to BS EN 1999:
UK National Annex to Eurocode 9
NA to BS EN 1999-1:
Design of aluminium structures
NA to BS EN 1999-1-2:2007
Structural fire design no current standard is superseded ISBN 978 0 580 57346 0 34.00 members, 68.00 non-members
B/525/9
BS EN 1646:
Leisure accommodation vehicles. Motor caravans
BS EN 1646-2:2008
User payload supersedes BS EN 1646-2:1999 ISBN 978 0 580 60106 4 34.00 members, 68.00 non-members
B/511
NA to BS EN 1999-1-4:2007
Cold-formed structural sheeting no current standard is superseded ISBN 978 0 580 57350 7 34.00 members, 68.00 non-members
B/525/9
BS EN ISO 1736:2008
Dried milk and dried milk products. Determination of fat content. Gravimetric method (Reference method) supersedes BS EN ISO 1736:2000 ISBN 978 0 580 63533 5 42.00 members, 84.00 non-members
AW/5
NA to BS EN 1999-1-5:2007
Shell structures no current standard is superseded ISBN 978 0 580 57352 1 34.00 members, 68.00 non-members
B/525/9
BS 6222:
Domestic kitchen equipment
BS EN PUBLICATIONS
The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard.
Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method) supersedes BS EN ISO 1737:2000 ISBN 978 0 580 63537 3 60.00 members, 120.00 non-members
AW/5
BS 6798:2009
Specification for installation and maintenance of gas-fired boilers of rated input not exceeding 70 kW net supersedes BS 6798:2000 ISBN 978 0 580 59048 1 79.00 members, 158.00 non-members
GSE/30
BS EN ISO 1854:2008
Whey cheese. Determination of fat content. Gravimetric method (Reference method) supersedes BS EN ISO 1854:2000 ISBN 978 0 580 63539 7 60.00 members, 120.00 non-members
AW/5
BS EN 115:
Safety of escalators and moving walks
BS EN 1914:2009 BS 8515:2009
Rainwater harvesting systems. Code of practice no current standard is superseded ISBN 978 0 580 60490 4 79.00 members, 158.00 non-members
CB/506
BS EN 115-1:2008
Construction and installation supersedes BS EN 115:1995 ISBN 978 0 580 59279 9 90.00 members, 180.00 non-members
MHE/4
Inland navigation vessels. Work boats, ships boats and lifeboats supersedes BS EN 1914:1997 ISBN 978 0 580 59524 0 42.00 members, 84.00 non-members
SME/32/-/7
10
BS EN ISO 2439:2008
Flexible cellular polymeric materials. Determination of hardness (indentation technique) supersedes BS EN ISO 2439:2001 ISBN 978 0 580 56850 3 42.00 members, 84.00 non-members
PRI/24
BS EN ISO 7328:2008
Milk-based edible ices and ice mixes. Determination of fat content. Gravimetric method (Reference method) supersedes the dual numbered standard BS EN ISO 7328:2000, BS 2472-3:2000 ISBN 978 0 580 63536 6 60.00 members, 120.00 non-members
AW/5
BS EN ISO 10407:
Petroleum and natural gas industries. Rotary drilling equipment
BS EN ISO 10407-2:2008
Inspection and classification of used drill stem elements no current standard is superseded ISBN 978 0 580 54834 5 124.00 members, 248.00 non-members
PSE/17/-/4
BS EN ISO 2450:2008
Cream. Determination of fat content. Gravimetric method (Reference method) supersedes BS EN ISO 2450:1999 ISBN 978 0 580 63535 9 60.00 members, 120.00 non-members
AW/5
BS EN ISO 7405:2008
Dentistry. Evaluation of biocompatibility of medical devices used in dentistry supersedes BS EN ISO 7405:1997 ISBN 978 0 580 58623 1 69.00 members, 138.00 non-members
CH/106
BS EN ISO 10846:
Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements
BS EN ISO 3449:2008
Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements supersedes BS EN ISO 3449:2005 ISBN 978 0 580 63420 8 60.00 members, 120.00 non-members
B/513/1
BS EN ISO 10846-1:2008
Principles and guidelines supersedes BS EN ISO 10846-1:1999 ISBN 978 0 580 53987 9 69.00 members, 138.00 non-members
EH/1/4
BS EN ISO 8381:2008
Milk-based infant foods. Determination of fat content. Gravimetric method (Reference method) supersedes the dual numbered standard BS EN ISO 8381:2000, BS 7142-1:2000 ISBN 978 0 580 63534 2 60.00 members, 120.00 non-members
AW/5
BS EN ISO 11961:2008
Petroleum and natural gas industries. Steel drill pipe supersedes BS EN ISO 11961:1997 ISBN 978 0 580 53556 7 103.00 members, 206.00 non-members
PSE/17/-/5
BS EN ISO 3457:2008
Earth-moving machinery. Guards. Definitions and requirements supersedes BS EN ISO 3457:2003 ISBN 978 0 580 63417 8 42.00 members, 84.00 non-members
B/513/1
BS EN 9101:2008
Aerospace series. Quality management systems. Assessment (based on ISO 9001:2000) no current standard is superseded ISBN 978 0 580 60602 1 84.00 members, 168.00 non-members
ACE/1
BS EN 12175:2006
Chemicals used for treatment of water intended for human consumption. Hexafluorosilicic acid supersedes BS EN 12175:2001 ISBN 978 0 580 57138 1 60.00 members, 120.00 non-members
CII/59
BS EN ISO 3471:2008
Earth-moving machinery. Roll-over protective structures. Laboratory tests and performance requirements supersedes the dual numbered standard BS EN 13510:2000, BS 6912-14:2000 ISBN 978 0 580 63517 5 69.00 members, 138.00 non-members
B/513/1
BS EN ISO 10058:
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method)
BS EN 13083:2008
Tanks for transport of dangerous goods. Service equipment for tanks. Adaptor for bottom loading and unloading supersedes BS EN 13083:2001 ISBN 978 0 580 57856 4 42.00 members, 84.00 non-members
AUE/18
BS EN ISO 6683:2008
Earth-moving machinery. Seat belts and seat belt anchorages. Performance requirements and tests supersedes BS EN ISO 6683:2005 ISBN 978 0 580 63450 5 34.00 members, 68.00 non-members
B/513/1
BS EN ISO 10058-1:2008
Apparatus, reagents, dissolution and determination of gravimetric silica supersedes BS EN ISO 10058:1996 ISBN 978 0 580 57833 5 42.00 members, 84.00 non-members
RPI/1
BS EN 13696:2008
Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance supersedes DD ENV 13696:2001 ISBN 978 0 580 56450 5 60.00 members, 120.00 non-members
B/543
BS EN ISO 7096:2008
Earth-moving machinery. Laboratory evaluation of operator seat vibration supersedes the dual numbered standard BS EN ISO 7096:2000, BS 6912-17:2000 ISBN 978 0 580 63419 2 60.00 members, 120.00 non-members
B/513/1
BS EN ISO 10058-2:2008
Wet chemical analysis supersedes BS EN ISO 10058:1996 ISBN 978 0 580 57834 2 60.00 members, 120.00 non-members
RPI/1
BS EN ISO 7208:2008
Skimmed milk, whey and buttermilk. Determination of fat content. Gravimetric method (Reference method) supersedes BS EN ISO 7208:2000 ISBN 978 0 580 63538 0 60.00 members, 120.00 non-members
AW/5
BS EN ISO 10058-3:2008
Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) supersedes BS EN ISO 10058:1996 ISBN 978 0 580 57835 9 42.00 members, 84.00 non-members
RPI/1
11
BS EN Publications continued...
BS EN ISO 13732:
Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces
BS EN 15268:2008
Petrol filling stations. Safety requirements for the construction of submersible pump assemblies no current standard is superseded ISBN 978 0 580 55491 9 69.00 members, 138.00 non-members
PVE/21
BS EN 15620:2008
Steel static storage systems. Adjustable pallet racking. Tolerances, deformations and clearances no current standard is superseded ISBN 978 0 580 58292 9 90.00 members, 180.00 non-members
MHE/8
BS EN ISO 13732-1:2008
Hot surfaces supersedes BS EN ISO 13732-1:2006 ISBN 978 0 580 65126 7 79.00 members, 158.00 non-members
PH/9/1
BS EN 15288:
Swimming pools
BS EN 15629:2008
Steel static storage systems. Specification of storage equipment no current standard is superseded ISBN 978 0 580 57755 0 69.00 members, 138.00 non-members
MHE/8
Safety requirements for design no current standard is superseded ISBN 978 0 580 55532 9 60.00 members, 120.00 non-members
SW/136
BS EN 15633: BS EN 15288-2:2008
Safety requirements for operation no current standard is superseded ISBN 978 0 580 55797 2 69.00 members, 138.00 non-members
SW/136
BS EN 14890:
Application interface for smart cards used as secure signature creation devices
BS EN 15633-1:2009
General considerations no current standard is superseded ISBN 978 0 580 58240 0 42.00 members, 84.00 non-members
AW/-/3
BS EN 14890-1:2008
Basic services no current standard is superseded ISBN 978 0 580 58269 1 114.00 members, 228.00 non-members
IST/17
BS EN 15316:
Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies
BS EN 15634: BS EN 15316-4-7:2008
Space heating generation systems, biomass combustion systems Foodstuffs. Detection of food allergens by molecular biological methods
BS EN 15029:2006
Products used for treatment of water intended for human consumption. Iron (III) hydroxide oxide no current standard is superseded ISBN 978 0 580 54995 3 42.00 members, 84.00 non-members
CII/59
no current standard is superseded ISBN 978 0 580 60840 7 84.00 members, 168.00 non-members
RHE/24
BS EN 15634-1:2009
General considerations no current standard is superseded ISBN 978 0 580 58241 7 42.00 members, 84.00 non-members
AW/-/3
BS EN 15436:
Road service area maintenance equipment
BS EN 15031:2006
Chemicals used for treatment of swimming pool water. Aluminium based coagulants no current standard is superseded ISBN 978 0 580 54997 7 42.00 members, 84.00 non-members
CII/59
BS EN 15436-2:2008
Performance assessment no current standard is superseded ISBN 978 0 580 56222 8 69.00 members, 138.00 non-members
B/513
BS EN 15635:2008
Steel static storage systems. Application and maintenance of storage equipment no current standard is superseded ISBN 978 0 580 55991 4 84.00 members, 168.00 non-members
MHE/8
BS EN 15507:2008 BS EN 15166:2008
Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements no current standard is superseded ISBN 978 0 580 55173 4 69.00 members, 138.00 non-members
MCE/3/5
Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades no current standard is superseded ISBN 978 0 580 56829 9 42.00 members, 84.00 non-members
PKW/0
BS EN 15644:2008
Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements no current standard is superseded ISBN 978 0 580 58297 4 79.00 members, 158.00 non-members
B/543
BS EN 15608:2008 BS EN 15194:2009
Cycles. Electrically power assisted cycles. EPAC bicycles no current standard is superseded ISBN 978 0 580 53173 6 69.00 members, 138.00 non-members
GME/25
Surface active agents. Quantitative determination of free fatty acid in alkylamidopropylbetaines. Gas-chromatographic method no current standard is superseded ISBN 978 0 580 58044 4 34.00 members, 68.00 non-members
CII/34
BS EN 15655:2009
Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods no current standard is superseded ISBN 978 0 580 57723 9 60.00 members, 120.00 non-members
PSE/10
12
BS EN Publications continued...
BS EN 15696:2008
Self storage. Specification for self storage services no current standard is superseded ISBN 978 0 580 59254 6 42.00 members, 84.00 non-members
SVS/7/3
BS EN 50136:
Alarm systems. Alarm transmission systems and equipment
BS EN 60068-2-31:2008
Test Ec. Rough handling shocks, primarily for equipment-type specimens supersedes BS EN 60068-2-31:1993 and BS EN 60068-2-32:1993 ISBN 978 0 580 55736 1 42.00 members, 84.00 non-members
GEL/104
BS EN 50136-1-5:2008
Requirements for packet switched network PSN no current standard is superseded ISBN 978 0 580 55875 7 34.00 members, 68.00 non-members
GW/1/5
BS EN 15702:2008
Cellular plastics. Cell count procedure for flexible and rigid polyurethane supersedes BS 4443-1:1988 ISBN 978 0 580 58983 6 34.00 members, 68.00 non-members
PRI/24
BS EN 60079:
Explosive atmospheres
BS EN 50216:
Power transformer and reactor fittings
BS EN 60079-14:2008 BS EN 50216-11:2008
Oil and winding temperature indicators no current standard is superseded ISBN 978 0 580 64604 1 34.00 members, 68.00 non-members
PEL/14
Electrical installations design, selection and erection supersedes BS EN 60079-14:2003 ISBN 978 0 580 55710 1 95.00 members, 190.00 non-members
GEL/31/11
BS EN 15704:2008
Liming materials. Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water no current standard is superseded ISBN 978 0 580 58989 8 34.00 members, 68.00 non-members
CII/37
BS EN 50408:2008
Household and similar electrical appliances. Safety. Particular requirements for cab heaters for vehicles no current standard is superseded ISBN 978 0 580 56084 2 34.00 members, 68.00 non-members
CPL/61/07
BS EN 60512:
Connectors for electronic equipment. Tests and measurements
BS EN 15800:2008
Cylindrical helical springs made of round wire. Quality specifications for cold coiled compression springs no current standard is superseded ISBN 978 0 580 62061 4 42.00 members, 84.00 non-members
GME/15
BS EN 60512-16:
Mechanical tests on contacts and terminations
BS EN 50492:2008
Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations no current standard is superseded ISBN 978 0 580 57564 8 84.00 members, 168.00 non-members
GEL/106
BS EN 60512-16-3:2008
Test 16c. Contact-bending strength no current standard is superseded ISBN 978 0 580 55909 9 34.00 members, 68.00 non-members
EPL/48
BS EN ISO 15882:2008
Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results supersedes BS EN ISO 15882:2003 ISBN 978 0 580 55729 3 69.00 members, 138.00 non-members
LBI/35
BS EN 50504:2008
Validation of arc welding equipment supersedes BS 7570:2000 ISBN 978 0 580 58174 8 60.00 members, 120.00 non-members
WEE/6
BS EN 60512-16-6:2008
Test 16f. Robustness of terminations no current standard is superseded ISBN 978 0 580 55912 9 34.00 members, 68.00 non-members
EPL/48
BS EN 50085:
Cable trunking systems and cable ducting systems for electrical installations
BS EN 50521:2008
Connectors for photovoltaic systems. Safety requirements and tests no current standard is superseded ISBN 978 0 580 62315 8 69.00 members, 138.00 non-members
GEL/82
BS EN 60512-16-7:2008
Test 16g. Measurement of contact deformation after crimping no current standard is superseded ISBN 978 0 580 55913 6 34.00 members, 68.00 non-members
EPL/48
BS EN 50085-2-2:2008
Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor no current standard is superseded ISBN 978 0 580 58291 2 69.00 members, 138.00 non-members
PEL/213
BS EN 60068:
Environmental testing
BS EN 60512-16-14:2008
Test 16n. Bending strength, fixed male tabs no current standard is superseded ISBN 978 0 580 55919 8 34.00 members, 68.00 non-members
EPL/48
BS EN 60068-2:
Tests
BS EN 50106:2008
Safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of EN 60335-1 supersedes BS EN 50106:1997 which remains current ISBN 978 0 580 61272 5 60.00 members, 120.00 non-members
CPL/61
BS EN 60068-2-20:2008
Test T. Test methods for solderability and resistance to soldering heat of devices with leads supersedes BS 2011-2.1T:1981 which remains current ISBN 978 0 580 55763 7 60.00 members, 120.00 non-members
EPL/501
BS EN 60512-16-16:2008
Test 16p. Torsional strength, fixed male tabs no current standard is superseded ISBN 978 0 580 55920 4 34.00 members, 68.00 non-members
EPL/48
14
BS EN 60512-16-17:2008
Test 16q. Tensile and compressive strength, fixed male tabs no current standard is superseded ISBN 978 0 580 55921 1 34.00 members, 68.00 non-members
EPL/48
BS EN 60851:
Winding wires. Test methods
BS EN 61158-3-4:2008
Type 4 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61563 4 60.00 members, 120.00 non-members
AMT/7
BS EN 60851-5:2008
Electrical properties supersedes BS EN 60851-5:1998 ISBN 978 0 580 57223 4 60.00 members, 120.00 non-members
GEL/55
BS EN 60519:
Safety in electroheat installations
BS EN 61158-3-7:2008
Type 7 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61564 1 69.00 members, 138.00 non-members
AMT/7
BS EN 60904: BS EN 60519-7:2009
Particular requirements for installations with electron guns no current standard is superseded ISBN 978 0 580 56430 7 42.00 members, 84.00 non-members
PEL/27
Photovoltaic devices
BS EN 60904-3:2008
Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data supersedes BS EN 60904-3:1993 ISBN 978 0 580 54257 2 69.00 members, 138.00 non-members
GEL/82
BS EN 61158-3-8:2008
Type 8 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61565 8 69.00 members, 138.00 non-members
AMT/7
BS EN 60598:
Luminaires
BS EN 60598-1:2008
General requirements and tests supersedes BS EN 60598-1:2004 which remains current ISBN 978 0 580 53578 9 114.00 members, 228.00 non-members
CPL/34/4
BS EN 61158:
Industrial communication networks. Fieldbus specifications
BS EN 61158-3-11:2008
Type 11 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61566 5 69.00 members, 138.00 non-members
AMT/7
BS EN 61158-2:2008
Physical layer specification and service definition no current standard is superseded ISBN 978 0 580 61559 7 147.00 members, 294.00 non-members
AMT/7
BS EN 60793:
Optical fibres
BS EN 61158-3-13:2008
Type 13 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61568 9 79.00 members, 158.00 non-members
AMT/7
BS EN 60793-2-50:2008
Product specifications. Sectional specification for class B single-mode fibres supersedes BS EN 60793-2-50:2004 ISBN 978 0 580 57362 0 69.00 members, 138.00 non-members
GEL/86/1
BS EN 61158-3:
Data-link layer service definition
BS EN 61158-3-1:2008
Type 1 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61560 3 103.00 members, 206.00 non-members
AMT/7
BS EN 61158-3-14:2008
Type 14 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61569 6 60.00 members, 120.00 non-members
AMT/7
BS EN 60794:
Optical fibre cables
BS EN 60794-2-41:2008
Indoor cables. Product specification for simplex and duplex buffered A4 fibres no current standard is superseded ISBN 978 0 580 55794 1 60.00 members, 120.00 non-members
GEL/86/1
BS EN 61158-3-2:2008
Type 2 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61561 0 79.00 members, 158.00 non-members
AMT/7
BS EN 61158-3-16:2008
Type 16 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61570 2 60.00 members, 120.00 non-members
AMT/7
BS EN 60794-3-30:2008
Outdoor cables. Family specification for optical telecommunication cables for lakes, river crossings and coastal application supersedes BS EN 60794-3-30:2003 ISBN 978 0 580 56833 6 60.00 members, 120.00 non-members
GEL/86/1
BS EN 61158-3-3:2008
Type 3 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61562 7 90.00 members, 180.00 non-members
AMT/7
BS EN 61158-3-17:2008
Type 17 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61571 9 69.00 members, 138.00 non-members
AMT/7
15
BS EN Publications continued...
BS EN 61158-3-19:2008
Type 19 elements supersedes BS EN 61158-3:2004 which remains current ISBN 978 0 580 61573 3 60.00 members, 120.00 non-members
AMT/7
BS EN 61158-5-18:2008
Type 18 elements supersedes BS EN 61158-5:2004 ISBN 978 0 580 61603 7 69.00 members, 138.00 non-members
AMT/7
BS EN 62428:2008
Electric power engineering. Modal components in three-phase A.C. systems. Quantities and transformations no current standard is superseded ISBN 978 0 580 56247 1 60.00 members, 120.00 non-members
SS/7
BS EN 61158-5:
Application layer service definition
BS EN 61158-5-19:2008
Type 19 elements supersedes BS EN 61158-5:2004 ISBN 978 0 580 61604 4 69.00 members, 138.00 non-members
AMT/7
BS EN 62491:2008
Industrial systems, installations and equipment and industrial products. Labelling of cables and cores no current standard is superseded ISBN 978 0 580 58257 8 69.00 members, 138.00 non-members
GEL/3
BS EN 61158-5-11:2008
Type 11 elements supersedes BS EN 61158-5:2004 ISBN 978 0 580 61596 2 90.00 members, 180.00 non-members
AMT/7
BS EN 61158-5-20:2008
Type 20 elements supersedes BS EN 61158-5:2004 ISBN 978 0 580 61605 1 79.00 members, 158.00 non-members
AMT/7
BS EN 80000:
Quantities and units
BS EN 61158-5-12:2008
Type 12 elements supersedes BS EN 61158-5:2004 ISBN 978 0 580 61597 9 103.00 members, 206.00 non-members
AMT/7
BS EN 61162:
Maritime navigation and radiocommunication equipment and systems. Digital interfaces
BS EN 80000-13:2008
Information science and technology partially supersedes BS EN 60027-2:2007 ISBN 978 0 580 59469 4 60.00 members, 120.00 non-members
SS/7
BS EN 61158-5-13:2008
Type 13 elements supersedes BS EN 61158-5:2004 ISBN 978 0 580 61598 6 84.00 members, 168.00 non-members
AMT/7
BS EN 61162-3:2008
Serial data instrument network no current standard is superseded ISBN 978 0 580 60430 0 42.00 members, 84.00 non-members
EPL/80
BS IMPLEMENTATIONS
BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard.
BS EN 61158-5-14:2008
Type 14 elements supersedes BS EN 61158-5:2004 ISBN 978 0 580 61599 3 90.00 members, 180.00 non-members
AMT/7
BS EN 61400:
Wind turbines
BS EN 61400-21:2008
Measurement and assessment of power quality characteristics of grid connected wind turbines supersedes BS EN 61400-21:2002 ISBN 978 0 580 56750 6 84.00 members, 168.00 non-members
PEL/88
BS EN 61158-5-15:2008
Type 15 elements supersedes BS EN 61158-5:2004 ISBN 978 0 580 61600 6 109.00 members, 218.00 non-members
AMT/7
BS ISO 815:
Rubber, vulcanized or thermoplastic. Determination of compression set
BS EN 62227:2008
Multimedia home server systems. Digital rights permission code no current standard is superseded ISBN 978 0 580 57885 4 90.00 members, 180.00 non-members
EPL/100
BS ISO 815-1:2008
At ambient and elevated temperatures supersedes BS 903-A6:1992 ISBN 978 0 580 55587 9 42.00 members, 84.00 non-members
PRI/22
BS EN 61158-5-16:2008
Type 16 elements supersedes BS EN 61158-5:2004 ISBN 978 0 580 61601 3 69.00 members, 138.00 non-members
AMT/7
BS EN 62288:2008
Maritime navigation and radiocommunication equipment and systems. Presentation of navigation-related information on shipborne navigational displays. General requirements, methods of testing and required test results no current standard is superseded ISBN 978 0 580 60053 1 95.00 members, 190.00 non-members
EPL/80
BS ISO 3290:
Rolling bearings. Balls
BS EN 61158-5-17:2008
Type 17 elements supersedes BS EN 61158-5:2004 ISBN 978 0 580 61602 0 84.00 members, 168.00 non-members
AMT/7
BS ISO 3290-1:2008
Steel balls supersedes BS ISO 3290:2001 ISBN 978 0 580 58384 1 42.00 members, 84.00 non-members
MCE/7
16
BS ISO 3290-2:2008
Ceramic balls no current standard is superseded ISBN 978 0 580 56112 2 42.00 members, 84.00 non-members
MCE/7
BS ISO 20665:2008
Water quality. Determination of chronic toxicity to Ceriodaphnia dubia no current standard is superseded ISBN 978 0 580 53208 5 60.00 members, 120.00 non-members
EH/3/5
PD 6695-1-10:2009
Recommendations for the design of structures to BS EN 1993-1-10 no current standard is superseded ISBN 978 0 580 59346 8 42.00 members, 84.00 non-members
B/525/31
BS ISO 4195:2007
Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods no current standard is superseded ISBN 978 0 580 53765 3 34.00 members, 68.00 non-members
PRI/67
BS ISO 21011:2008
Cryogenic vessels. Valves for cryogenic service no current standard is superseded ISBN 978 0 580 54555 9 42.00 members, 84.00 non-members
PVE/18
PD CEN/TR 15367:
Petroleum products. Guide for good housekeeping
PD CEN/TR 15367-1:2007
Automotive diesel fuels no current standard is superseded ISBN 978 0 580 65831 0 42.00 members, 84.00 non-members
PTI/2
BS ISO 5832:
Implants for surgery. Metallic materials
BS ISO 23317:2007
Implants for surgery. In vitro evaluation for apatite-forming ability of implant materials no current standard is superseded ISBN 978 0 580 57174 9 60.00 members, 120.00 non-members
CH/150/1
BS ISO 5832-14:2007
Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy no current standard is superseded ISBN 978 0 580 60919 0 34.00 members, 68.00 non-members
CH/150/1
PD ISO/IEC TR 15504:
Information technology. Process assessment
BS ISO 26945:2008
Metallic and other inorganic coatings. Electrodeposited coatings of tin-cobalt alloy no current standard is superseded ISBN 978 0 580 58971 3 42.00 members, 84.00 non-members
STI/33
PD ISO/IEC TR 15504-6:2008
An exemplar system life cycle process assessment model no current standard is superseded ISBN 978 0 580 64254 8 109.00 members, 218.00 non-members
IST/15
BS ISO 12003:
Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors
BS ISO 12003-2:2008
Rear-mounted ROPS supersedes BS ISO 12003-2:2002 ISBN 978 0 580 57033 9 79.00 members, 158.00 non-members
AGE/6
BS ISO 80000-7:2008
Light supersedes BS ISO 31-6:1992 ISBN 978 0 580 54867 3 84.00 members, 168.00 non-members
SS/7
BS ISO 15971:2008
Natural gas. Measurement of properties. Calorific value and Wobbe index no current standard is superseded ISBN 978 0 580 58185 4 84.00 members, 168.00 non-members
PTI/15
PD CLC/TR 50378:
Passive components to be used in optical fibre communication systems. Product specifications
PUBLISHED DOCUMENTS
PD CLC/TR 50378-2-1:2009 PD ISO/TR 1281:
Rolling bearings. Explanatory notes on ISO 281 SC(SC2)-PC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre no current standard is superseded ISBN 978 0 580 57685 0 60.00 members, 120.00 non-members
GEL/86/2
BS ISO 17334:2008
Metallic and other inorganic coatings. Autocatalytic nickel over autocatalytic copper for electromagnetic shielding no current standard is superseded ISBN 978 0 580 54075 2 42.00 members, 84.00 non-members
STI/33
PD ISO/TR 1281-1:2008
Basic dynamic load rating and basic rating life no current standard is superseded ISBN 978 0 580 64733 8 84.00 members, 168.00 non-members
MCE/7
PD IEC/TR 60909:
Short-circuit currents in three-phase A.C. systems
BS ISO/IEC 19757:
Information technology. Document schema definition languages (DSDL)
BS ISO/IEC 19757-8:2008
Document semantics renaming language (DSRL) no current standard is superseded ISBN 978 0 580 54616 7 60.00 members, 120.00 non-members
IST/41
PD ISO/TR 1281-2:2008
Modified rating life calculation, based on a systems approach to fatigue stresses no current standard is superseded ISBN 978 0 580 59928 6 84.00 members, 168.00 non-members
MCE/7
PD IEC/TR 60909-2:2008
Data of electrical equipment for short-circuit current calculations supersedes PD 7639-2:1994 ISBN 978 0 580 62329 5 79.00 members, 158.00 non-members
PEL/73
17
DD IEC/TS 61850:
Communication networks and systems for power utility automation
PD IEC/TR 62572-2:2008
Laser module degradation no current standard is superseded ISBN 978 0 580 62775 0 60.00 members, 120.00 non-members
GEL/86/3
DD IEC/TS 61850-80-1:2009
Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104 no current standard is superseded ISBN 978 0 580 61697 6 95.00 members, 190.00 non-members
PEL/57
PAS 197:2009
Code of practice for cultural collections management no current standard is superseded ISBN 978 0 580 61352 4 58.00 members, 58.00 non-members
DD IEC/PAS 62137:
Electronics assembly technology
DD IEC/PAS 62137-3:2009
Selection guidance of environmental and endurance test methods for solder joints no current standard is superseded ISBN 978 0 580 64126 8 60.00 members, 120.00 non-members
EPL/501
Direct marketing. Environmental performance. Specification no current standard is superseded ISBN 978 0 580 59999 6 80.00 members, 80.00 non-members
DD IEC/TS 62492:
Industrial process control devices. Radiation thermometers
DD IEC/TS 62492-1:2008
Technical data for radiation thermometers no current standard is superseded ISBN 978 0 580 58686 6 34.00 members, 68.00 non-members
GEL/65/2
DD CEN/TS 15750:2006
Fertilizers. Determination of different forms of nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods no current standard is superseded ISBN 978 0 580 60740 0 21.00 members, 42.00 non-members
CII/37
DD IEC/TS 62538:2009
Categorization of optical devices no current standard is superseded ISBN 978 0 580 59511 0 21.00 members, 42.00 non-members
GEL/86
Cavity resonator method to measure the complex permittivity of low-loss dielectric plates no current standard is superseded ISBN 978 0 580 62052 2 21.00 members, 42.00 non-members
EPL/46/2
BS 5628:
Code of practice for the use of masonry
Method for measuring performance of portable household electric room air cleaners no current standard is superseded ISBN 978 0 580 65622 4 60.00 members, 120.00 non-members
CPL/59
BS 5628-1:2005
Structural use of unreinforced masonry CORRIGENDUM 1
B/525/6
18
BS 5628-2:2005
Structural use of reinforced and prestressed masonry CORRIGENDUM 1
B/525/6
BS EN 12831:2003
Heating systems in buildings. Method for calculation of the design heat load CORRIGENDUM 1
RHE/24
BS EN ISO 105:
Textiles. Tests for colour fastness
BS EN ISO 105-C08:2002+A1:2008
Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator AMENDMENT 1 42.00 members, 84.00 non-members
TCI/81
BS 5628-3:2005
Materials and components, design and workmanship CORRIGENDUM 1
B/525/6
DD CEN/TS 13388:2008
Copper and copper alloys. Compendium of compositions and products CORRIGENDUM 1
NFE/34
BS EN 14336:2004 BS 5975:2008
Code of practice for temporary works procedures and the permissible stress design of falsework CORRIGENDUM 1
B/514/26
Heating systems in buildings. Installation and commissioning of water based heating systems CORRIGENDUM 1
RHE/24
BS EN 999:1998+A1:2008
Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body AMENDMENT 1 60.00 members, 120.00 non-members
MCE/3
BS EN 14375:2003
Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing CORRIGENDUM 2
PKW/0/3
BS EN 200:2008
Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification CORRIGENDUM 1
B/504/8
BS EN 1093:
Safety of machinery. Evaluation of the emission of airborne hazardous substances
BS EN 15707:2008
Print media surveys. Vocabulary and service requirements CORRIGENDUM 1
SVS/3
BS EN 1093-2:2006+A1:2008
Tracer gas method for the measurement of the emission rate of a given pollutant AMENDMENT 1 42.00 members, 84.00 non-members
MCE/3
BS EN 817:2008
Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications CORRIGENDUM 1
B/504/8
BS EN 1088:1995+A2:2008
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection CORRIGENDUM 1
MCE/3
BS EN 1093-7:1998+A1:2008
Separation efficiency by mass, ducted outlet AMENDMENT 1 34.00 members, 68.00 non-members
MCE/3
BS EN 1093-9:1998+A1:2008
Pollutant concentration parameter, room method AMENDMENT 1 34.00 members, 68.00 non-members
MCE/3
BS EN 1886:2007
Ventilation for buildings. Air handling units. Mechanical performance CORRIGENDUM 1
RHE/2
BS 746:2005+A1:2009
Specification for gas meter unions and adaptors AMENDMENT 1 42.00 members, 84.00 non-members
GSE/25
BS EN 12077:
Cranes safety. Requirements for health and safety
BS EN 1093-11:2001+A1:2008
Decontamination index AMENDMENT 1 42.00 members, 84.00 non-members
MCE/3
BS EN 12077-2:1998+A1:2008
Limiting and indicating devices CORRIGENDUM 1
MHE/3/11
BS 8848:2007+A1:2009
Specification for the provision of visits, fieldwork, expeditions, and adventurous activities, outside the United Kingdom AMENDMENT 1 50.00 members, 100.00 non-members
SVS/2/5
BS EN 1526:1997+A1:2008
Safety of industrial trucks. Additional requirements for automated functions on trucks AMENDMENT 1 42.00 members, 84.00 non-members
MHE/7
BS EN 12273:2008
Slurry surfacing. Requirements CORRIGENDUM 1
B/510/2
BS EN 1550:1997+A1:2008
Machine-tools safety. Safety requirements for the design and construction of work holding chucks AMENDMENT 1 42.00 members, 84.00 non-members
MTE/1
BS EN 12828:2003
Heating systems in buildings. Design for waterbased heating systems CORRIGENDUM 1
RHE/24
19
BS ISO 6487:2002+A1:2008
Road vehicles. Measurement techniques in impact tests. Instrumentation AMENDMENT 1 42.00 members, 84.00 non-members
AUE/7
BS EN 1612-2:2000+A1:2008
Safety requirements for reaction moulding plant AMENDMENT 1 60.00 members, 120.00 non-members
MCE/3/2
SPECIAL ANNOUNCEMENTS
Comments can be sent by email or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000 BS 3505:1986
Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water This standard was withdrawn in error and has now been reinstated as current and obsolescent. Contact: Committee Service Centre Email: csc@bsigroup.com
PRI/88
BS EN 1857:2003+A1:2008
Chimneys. Components. Concrete flue liners AMENDMENT 1 79.00 members, 158.00 non-members
B/506
BS EN 1995:
Eurocode 5. Design of timber structures
BS EN 1995-1-1:2004+A1:2008
General. Common rules and rules for buildings AMENDMENT 1 103.00 members, 206.00 non-members
B/525/5
BS 5315:1991
Hose clamps (worm drive type) for general purpose use (metric series)
PSE/6
BS 4346:
Joints and fittings for use with unplasticized PVC pressure pipes
BS 6068:
Water quality
BS EN 60335:
Household and similar electric appliances. Safety
BS 4346-1:1969
Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply This standard was withdrawn in error and has now been reinstated as current and obsolescent. Contact: Committee Service Centre Email: csc@bsigroup.com
PRI/88
BS 6068-2:
Physical, chemical and biochemical methods
BS EN 60335-2-82:2003+A1:2008
Particular requirements for amusement machines and personal service machines AMENDMENT 1 60.00 members, 120.00 non-members
CPL/61/01
BS 6068-2.42:1993
Determination of sodium and potassium: determination of sodium by atomic absorption spectrometry
EH/3/2
BS EN 60404:
Magnetic materials
BS EN 62305:
Protection against lightning
BS 6068-2.43:1993
Determination of sodium and potassium: determination of potassium by atomic absorption spectrometry
EH/3/2
BS EN 62305-3:2006/Amendment 1 BS EN 60404-2:1998+A1:2008
Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame AMENDMENT 1 60.00 members, 120.00 non-members
ISE/NFE/5
Physical damage to structures and life hazard This amendment to the standard, which will be available shortly, implements verbatim EN 62305-3:2006/A11:2009 which implements European requirements for Normative References, Terms and Definitions, Lightning Protection Systems and Dimensions. Contact: Keith Stiles Email: keith.stiles@bsigroup.com
GEL/81
BS 6068-2.44:1993
Determination of sodium and potassium: determination of sodium and potassium by flame emission spectrometry
EH/3/2
BS EN 61675:
Radionuclide imaging devices. Characteristics and test conditions
BS ISO 8528:
Reciprocating internal combustion engine driven alternating current generating sets
BS 6068-2.45:1993
Determination of selenium by atomic absorption spectrometry
EH/3/2
BS EN 61675-1:1998+A1:2008
Positron emission tomographs AMENDMENT 1 69.00 members, 138.00 non-members
CH/62/3
BS ISO 8528-5:2005
Generating sets Following the recent systematic review of this standard, the secretary of ISO/TC 70 has announced that the decision of the committee is to revise this standard. When work on this begins, an announcement will appear in the New work started section of this magazine. Contact: Committee Service Centre Email: csc@bsigroup.com
MCE/14/-/8
BS 6068-4.12:1998
Microbiological methods. Detection and enumeration of Legionella
EH/3/4
BS ISO 4309:2004+A1:2008
Cranes. Wire ropes. Care, maintenance, installation, examination and discard AMENDMENT 1 79.00 members, 158.00 non-members
MHE/3/1
BS EN 172:1995
Specification for sunglare filters used in personal eye-protectors for industrial use
PH/2/1
20
BS EN 1116:2004
Kitchen furniture. Co-ordinating sizes for kitchen furniture and kitchen appliances
FW/0
BS 1659:1950
Specification for tractive armature direct current neutral track and line relays for railway signalling
GEL/9
BS 4346:
Joints and fittings for use with unplasticized PVC pressure pipes
BS EN 10271:1999
Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions
PRI/66
This standard has been declared obsolescent as new equipment is unlikely to be manufactured to this standard, but there is a great deal of equipment in accordance still in service and which will require to be supported for many years to come
BS 4346-1:1969
Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply
PRI/88
BS EN 13597:2003
Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs
RAE/3/-/4
BS 1745:1951
Specification for alternating-current relays for railway signalling: track relays (double-element, 2-position), line relays (single-element, 2-position)
GEL/9
This standard has been declared obsolescent as it applies to pipework with a design life of 50 years and should therefore not yet be withdrawn. The National Forewords of BS EN 1452-1:2000, BS EN 1452-2:2000, BS EN 1452-3:2000, BS EN 1452-4:2000 and BS EN 1452-5:2000 do correctly state that these will be made obsolescent (and not withdrawn)
BS EN 13721:2004
Furniture. Assessment of the surface reflectance
FW/0/1
This standard has been declared obsolescent as new equipment is unlikely to be manufactured to this standard, but there is a great deal of equipment in accordance still in service and which will require to be supported for many years to come
BS 7291:
Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings
BS EN 13722:2004
Furniture. Assessment of the surface gloss
FW/0/1
BS 1924:
Stabilized materials for civil engineering purposes
BS 7291-4:1990
Specification for chlorinated polyvinyl chloride (PVC-C) pipes and associated fittings and solvent cement
PRI/88
BS EN 14073:
Office furniture. Storage furniture
BS 1924-1:1990
General requirements, sampling, sample preparation and tests on materials before stabilization
B/510
BS EN 14073-2:2004
Safety requirements
FW/0
BS EN 14073-3:2004
Test methods for the determination of stability and strength of the structure
FW/0
This standard has been declared obsolescent as there are a number of references that will need updating by the committee and sampling methods and this cannot be done at present
This standard was proposed for withdrawal in the September 2008 edition of Update Standards because following a systematic review carried out earlier in the year, the committee concluded these pipes were no longer manufactured in the UK. It has since been discovered that PVC-C is one of the materials called up as suitable for condensate drainage pipes in BS 6798 (section 4.3.3.1). As a result, it has now been decided to declare the standard as obsolescent
BS 1924-2:1990 BS 3M 45:
Test methods for tyres Methods of test for cement-stabilized and limestabilized materials
B/510
BS 9300 C199-276:1971
Detail specification for silicon voltage-regulator diodes
EPL/47
BS 3M 45-2:1998
Aircraft tyres and rims
ACE/59
This standard has been declared obsolescent as there are a number of references that will need updating by the committee and sampling methods and this cannot be done at present
BS 9300 C377-378:1971
BS 2452:1954
Specification for electrically driven jib cranes mounted on a high pedestal or portal carriage (high pedestal or portal jib cranes)
MHE/3/3
BS 581:1950
Specification for electrically-driven pointoperating machines for railways
GEL/9
PRI/88
This standard has been declared obsolescent as new equipment is unlikely to be manufactured to this standard, but there is a great deal of equipment in accordance still in service and which will require to be supported for many years to come
This standard has been declared obsolescent as it applies to pipework with a design life of 50 years and should therefore not yet be withdrawn. The National Forewords of BS EN 1452-1:2000, BS EN 1452-2:2000, BS EN 1452-3:2000, BS EN 1452-4:2000 and BS EN 1452-5:2000 do correctly state that these will be made obsolescent (and not withdrawn)
BS 9300 C405-429:1971
Detail specifications for silicon voltageregulator diodes
EPL/47
21
BS 9300 C780-831:1971
Detail specification for silicon voltage regulator diodes
EPL/47
BS 9364 N011:1978
Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level
EPL/47
BS 9364 N012:1978
Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plus additional assessment level
EPL/47
Detail specification for general purpose silicon signal diodes. 150 mA, 150 V, hermetically sealed, glass encapsulation. General application category Q
EPL/47
BS 9364 N013:1979
Detail specification for low power silicon p-n-p switching transistors. 25 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level
EPL/47
BS 9300 C599:1971
Detail specification for silicon microwave switching diode, rod mounted
EPL/47
BS 9305 N001:1972
Detail specification for silicon voltage regulator diodes. 1.5 W, 3.3 to 33 V (5%), hermetically sealed. General application category Q
EPL/47
BS 9364 N016:1979
Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level
EPL/47
BS 9300 C667-668:1971
Detail specification for silicon avalanche rectifier diodes
EPL/47
BS 9305 N041:1972
Detail specification for silicon voltage regulator diodes. 400 mW, 2.7 to 33 V (5%), hermetically sealed, glass encapsulation. General application category Q
EPL/47
BS 9300 C678-721:1971
Detail specification for silicon voltage regulator diodes
EPL/47
BS 9364 N017:1979
Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plus additional assessment level
EPL/47
BS 9305 N042:1972
Detail specification for silicon voltage regulator diodes. 1.5 W, 6.8 to 200 V (5%), hermetically sealed. General application category C
EPL/47
BS 9300 C762:1971
Detail specification for mixer diodes for use at X-band frequencies
EPL/47
BS 9305 N044:1974
Detail specification for silicon voltage regulator diodes. 1.0 W, 3.3 to 33 V (5%), hermetically sealed. Full assessment level
EPL/47
PD ES 59008:
Data requirements for semiconductor die
PD ES 59008-4:
Specific requirements and recommendations
BS 9300 C771-772:1971
Detail specification for coaxial mixer diodes
EPL/47
This standard has been declared obsolescent as it is replaced by the BS EN 62258 series
BS 9300 C776-777:1971
Detail specification for germanium coaxial mixer diodes
EPL/47
PD ES 59008-4-3:2000
Thermal
EPL/47
BS 9300 C778:1971
Detail specification for a matched pair of germanium coaxial mixer diodes
EPL/47
PD ES 59008-4-4:2000
Electrical simulation
EPL/47
22
PD ES 59008-5:
Particular requirements and recommendations for die types
BS 6222:
Domestic kitchen equipment
BS 6222-5:1995
Specification for strength requirements and methods of test for peninsular units, island units and breakfast bars
FW/0
PD ES 59008-5-1:2001
Bare die
EPL/47
This standard has been declared obsolescent as it is replaced by the BS EN 62258 series
Superseded by BS 6222-2:2009
BS 903:
Physical testing of rubber
PD ES 59008-5-2:2001
Bare die with added connection structures
EPL/47
BS 7570:2000 BS 903-A6:1992
Method for determination of compression set at ambient, elevated or low temperatures
PRI/22
This standard has been declared obsolescent as it is replaced by the BS EN 62258 series
Superseded by BS EN 50504:2008
BS 8434:
Methods of test for assessment of the fire integrity of electric cables
PD ES 59008-5-3:2001
Minimally-packaged die
EPL/47
BS 3628:1963
Specification for hose clips (worm drive type) for general purpose use
PSE/6
This standard has been declared obsolescent as it is replaced by the BS EN 62258 series
BS 8434-1:2003
Test for unprotected small cables for use in emergency circuits. BS EN 50200 with addition of water spray
GEL/20/18
PD ES 59008-6:
Exchange data formats and data dictionary
Superseded by BS EN 50200:2006
BS 3934:
Mechanical standardization of semiconductor devices.
PD ES 59008-6-2:2001
Data dictionary
EPL/47
BS 9300:1969
Specification for semiconductor devices of assessed quality: generic data and methods of test
EPL/47
BS 3934-10:1992
Schedule of UK national drawings giving dimensions
EPL/47
This standard has been declared obsolescent as it is replaced by the BS EN 62258 series
BS 9400:1970
Specification for integrated electronic circuits and micro-assemblies of assessed quality (qualification approval procedures): generic data and methods of test
EPL/47
BS 4443:
Methods of test for flexible cellular materials
BS 4443-1:1988
Method 4. Measurement of cell count
PRI/24
BS 9430:1978
Rules for the preparation of detail specifications for integrated circuits of assessed quality: voltage regulators. Full assessment level
EPL/47
Superseded by BS EN ISO 1923:1995, BS EN ISO 845:1995, BS EN ISO 1856:1996, BS EN ISO 3386-1:1998, BS EN ISO 3386-2:1998, BS EN ISO 1798:2000 and BS EN 15702:2008
BS 5225:
Photometric data for luminaires
BS 9490:1975
Rules for the preparation of detail specifications for digital integrated circuits of assessed quality. Full assessment level
EPL/47
BS 5225-1:1975
Photometric measurements
BS 8208:
Guide to assessment of suitability of external cavity walls for filling with thermal insulants
CPL/34/10
Superseded by BS EN 13032-1:2004
BS 9493:1981 BS 8208-1:1985
Existing traditional cavity construction
B/525/6
BS 5449:1990
Specification for forced circulation hot water central heating systems for domestic premises
RHE/24
Rules for the preparation of detail specifications for integrated circuits of assessed quality which perform mixed digital and/or analogue functions
EPL/47
23
BS EN 61058:
Switches for appliances
BS EN 61058-1:1992
General requirements
EPL/23
Superseded by BS EN 61058-1:2002+A2:2008
BS EN 61158:
Digital data communications for measurement and control. Fieldbus for use in industrial control systems
BS EN 61158-5:2004
Application layer service definition
AMT/7
BS EN 60068:
Environmental testing
BS EN 60068-2-32:1993
Tests. Test Ec. Rough handling shocks, primarily for equipment-type specimens
GEL/104
BS 949: BS EN 131800:1998
Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil D.C. capacitors
EPL/40X
Screwing taps
Superseded by BS EN 60068-2-31:2008
Superseded by BS EN 60384-13:2006
BS EN 60335:
Household and similar electrical appliances. Safety
BS ISO 31:
Quantities and units
BS 1127:
Screwing dies and dienuts
BS EN 60335-2-90:2002
Particular requirements for commercial microwave ovens
CPL/61/07
BS ISO 31-6:1992
Light and related electromagnetic radiations
SS/7
Superseded by BS EN 60335-2-90:2006
PD 6668:2000 BS EN 60704:
Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances Managing risk for corporate governance
SVS/6
PD 7639: BS EN 60704-3:1995
Procedure for determining and verifying declared noise emission values
CPL/59
PD 7639-2:1994
Data for electrical equipment for short-circuit current calculations in accordance with BS 7639
PEL/73
BS 1660:
Machine tapers
Superseded by BS EN 60704-3:2006
BS EN 60730:
Specification for automatic electrical controls for household and similar use
BS E9372:1976
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: ambient-rated bipolar transistors for low and high frequency amplification
EPL/47
BS EN 60730-2-1:1997
Particular requirements. Electrical controls for electrical household appliances
CPL/72
Superseded by BS EN 60730-2-14:1998
BS EN 61000:
Electromagnetic compatibility (EMC)
BS 2782: BS E9375:1975
Specification. Harmonized system of quality assessment for electronic components. Blank detail specification: voltage regulator diodes and voltage reference diodes excluding precision-voltage temperature-compensated reference diodes
EPL/47
BS EN 61000-4-3:2002
Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test
GEL/210/12
Superseded by BS EN 61000-4-3:2006+A1:2008
24
BS 6057:
Rubber latices
BS EN ISO 105-G03:1997
Colour fastness to ozone in the atmosphere
TCI/81
BS 6057-3:
Methods of test
BS EN ISO 105-N02:1995
Colour fastness to bleaching: Peroxide
TCI/81
BS 3087:
Pliers and nippers
BS EN ISO 105-N03:1995
Colour fastness to bleaching: Sodium chlorite (mild)
TCI/81
BS EN ISO 105-N04:1995
Colour fastness to bleaching: Sodium chlorite (severe)
TCI/81
BS 4062:
Valves for hydraulic fluid power systems
BS EN ISO 105-P01:1995
Colour fastness to dry heat (excluding pressing)
TCI/81
BS 6148: BS 4140:
Methods of test for aluminium oxide Methods of test for commercial refrigerated cabinets
BS EN ISO 105-S01:1996
Colour fastness to vulcanization. Hot air
TCI/81
BS EN ISO 105-S02:1996
Colour fastness to vulcanization: Sulfur monochloride
TCI/81
BS 7275:
Determination of hydraulic fluid power motor characteristics
BS EN ISO 105-S03:1996
Colour fastness to vulcanization. Open steam
TCI/81
BS 5293:
Sampling and testing carbon black for use in the rubber industry
BS EN ISO 105-X01:1996
Colour fastness to carbonizing: Aluminium chloride
TCI/81
BS EN ISO 105:
Textiles. Tests for colour fastness
BS EN ISO 105-X02:1996
Colour fastness to carbonizing: Sulfuric acid
TCI/81
BS EN ISO 105-B05:1996
Detection and assessment of photochromism
TCI/81
BS EN ISO 105-X09:1996
Colour fastness to formaldehyde
TCI/81
BS 5341:
Piston rings up to 200 mm diameter for reciprocating internal combustion engines
BS EN ISO 105-B06:2004
Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
TCI/81
BS EN ISO 105-X10:1996
Assessment of migration of textile colours into polyvinyl chloride coatings
TCI/81
25
BS EN ISO 2419:2006
Leather. Physical and mechanical tests. Sample preparation and conditioning
TCI/69
BS EN ISO 5470:
Rubber- or plastics-coated fabrics. Determination of abrasion resistance
BS EN ISO 105-Z06:2000
Evaluation of dye and pigment migration
TCI/81
BS EN ISO 3385:1995
Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding
PRI/24
BS EN ISO 5470-1:1999
Taber abrader
TCI/69
BS EN ISO 6149:
Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing
BS EN ISO 105-Z11:2001
Evaluation of speckiness of colorant dispersions
TCI/81
BS EN ISO 4098:2006
Leather. Chemical tests. Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter
TCI/69
BS EN ISO 6149-1:2007
Ports with truncated housing for O-ring seal
MCE/18/-/4
BS EN ISO 4167:2006
Polyolefin agricultural twines
TCI/77
BS EN ISO 6149-2:2007
Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
MCE/18/-/4
BS EN ISO 1167:
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure
BS EN ISO 4263:
Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test
BS EN ISO 1167-1:2006
General method
PRI/88/4
Dimensions, design, test methods and requirements for light-duty (L series) stud ends
MCE/18/-/4
BS EN ISO 4375:2004
Hydrometric determinations. Cableway systems for stream gauging
CPI/113
BS EN ISO 6383-1:2004
Trouser tear method
PRI/75
BS EN ISO 1269:2006
Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of volatile matter (including water)
PRI/82
BS EN ISO 4612:1999
Plastics. Preparation of PVC pastes for test purposes. Planetary-mixer method
PRI/82
BS EN ISO 6383-2:2004
Elmendorf method
PRI/75
BS EN ISO 1622:
Plastics. Polystrene (PS) moulding and extrusion materials
BS EN ISO 4613:
Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials
BS EN ISO 1622-1:2000
Designation system and basis for specifications
PRI/82
BS EN ISO 4613-1:1999
Designation and specification
PRI/82
BS EN 1765:2004
Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
PRI/66
BS EN ISO 5263:
Pulps. Laboratory wet disintegration
BS EN ISO 6885:2007
Animal and vegetable fats and oils. Determination of anisidine value
AW/307
BS EN ISO 5263-1:2004
Disintegration of chemical pulps
PAI/11
BS EN ISO 1872:
Polyethylene (PE) moulding and extrusion materials
BS EN ISO 1872-1:1999
Designation system and basis for specifications
PRI/82
BS EN ISO 5269:
Pulps. Preparation of laboratory sheets for physical testing
BS EN ISO 7391:
Plastics. Polycarbonate (PC) moulding and extrusion materials
BS EN ISO 5269-2:2004
Rapid-Koethen method
PAI/11
BS EN ISO 7391-1:2006
Designation system and basis for specifications
PRI/82
26
BS EN ISO 7391-2:2006
Preparation of test specimens and determination of properties
PRI/82
BS EN ISO 10432:2004
Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
PSE/17/-/4
BS EN 12484-4:2002
Installation and acceptance
AGE/30
BS EN ISO 10447:2007
Resistance welding. Peel and chisel testing of resistance spot and projection welds
WEE/29
AGE/30
BS EN 12734:2000
Irrigation techniques. Quick coupling pipes for movable irrigation supply. Technical characteristics and testing
AGE/30
BS EN ISO 7765-1:2004
Staircase methods
PRI/75
BS EN ISO 11608:
Pen-injectors for medical use
BS EN ISO 9936:2006
Animal and vegetable fats and oils. Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography
AW/307
BS EN ISO 11608-4:2007
Requirements and test methods for electronic and electromechanical pen-injectors
CH/84
BS EN ISO 13625:2002
Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings
PSE/17/-/4
BS EN ISO 13631:2002
Petroleum and natural gas industries. Packaged reciprocating gas compressors
MCE/8
BS EN ISO 12086-1:2006
Designation system and basis for specifications
BS EN 13997:2003
Irrigation techniques. Connection and control accessories for use in irrigation systems. Technical characteristics and testing
AGE/30
BS EN ISO 10417:2004
Petroleum and natural gas industries. Subsurface safety valve systems. Design, installation, operation and redress
PSE/17/-/4
PRI/82
BS EN ISO 12086-2:2006
Preparation of test specimens and determination of properties
PRI/82
BS EN ISO 14373:2007
Resistance welding. Procedure for spot welding of uncoated and coated low carbon steels
WEE/29
BS EN ISO 10424:
Petroleum and natural gas industries. Rotary drilling equipment
BS EN ISO 12156:
Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR)
BS EN ISO 10424-1:2004
Rotary drill stem elements
PSE/17/-/4
BS EN ISO 12156-1:2006
Test method
MCE/22
BS EN ISO 10426:
Petroleum and natural gas industries. Cements and materials for well cementing
BS EN 14420:
Hose fittings with clamp units
BS EN ISO 10426-3:2004
Testing of deepwater well cement formulations
PSE/17/-/3
BS EN 14420-1:2004
Requirements, survey, designation and testing
PRI/66
BS EN ISO 10426-4:2004
Preparation and testing of foamed cement slurries at atmospheric pressure
PSE/17/-/3
BS EN 12484:
Irrigation techniques. Automatic turf irrigation systems
BS EN 14420-4:2004
Flange connections
PRI/66
BS EN 14420-6:2004
TW tank truck couplings
PRI/66
BS EN ISO 10427-2:2004
Centralizer placement and stop-collar testing
PSE/17/-/3
BS EN 12484-2:2000
Design and definition of typical technical templates
AGE/30
DD CEN/TS 14421:2006
Hose tail and ferrule for crimping and swaging
PRI/66
BS EN ISO 10427-3:2004
Performance testing of cementing float equipment
PSE/17/-/3
BS EN 14422:2004 BS EN 12484-3:2000
Automatic control and system management
AGE/30
27
Plastics piping systems for hot and cold water installations. Polybutylene (PB)
BS EN ISO 21171:2006
Medical gloves. Determination of removable surface powder
CH/205/3
BS EN ISO 14631:1999
Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods
PRI/75
Petroleum and natural gas industries. Pipeline transportation systems. Test procedures for mechanical connectors
PSE/17/2
BS EN ISO 14663:
Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials
BS EN ISO 24276:2006
Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements and definitions
AW/-/3
Resistance welding. Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)
WEE/29
BS EN 29367:
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirements
BS EN ISO 14663-2:2006
Preparation of test specimens and determination of properties
PRI/82
BS EN ISO 16433:2007
Resistance welding. Procedure for seam welding of uncoated and coated low carbon steels
WEE/29
BS EN ISO 17078-1:2004
Side-pocket mandrels
PSE/17/-/4
BS EN ISO 15753:2006
Animal and vegetable fats and oils. Determination of polycyclic aromatic hydrocarbons
AW/307
BS EN ISO 17294:
Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS)
PD ISO/TR 210:1999
Essential oils. General rules for packaging, conditioning and storage
AW/54
BS EN ISO 15788:
Animal and vegetable fats and oils. Determination of stigmastadienes in vegetable oils
PD ISO/TR 211:1999
Essential oils. General rules for labelling and marking of containers
AW/54
BS ISO 247:2006
Rubber. Determination of ash
PRI/23
BS EN 20105:
Textiles. Tests for colour fastness
BS ISO 363:
Textile machinery and accessories. Flat steel healds with closed end loops
BS ISO 363-1:2006
Dimensions of healds manufactured of rolled steel wire
TCI/33
28
BS ISO 363-2:2006
Dimensions of healds manufactured of hardened strip steel
TCI/33
BS ISO 603-11:1999
Hand finishing sticks
MTE/13
BS ISO 2475:1999
Chloroprene rubber (CR). General-purpose types. Evaluation procedure
PRI/50
BS ISO 368:2006
Spinning preparatory, spinning and doubling (twisting) machinery. Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
TCI/33
BS ISO 603-12:1999
Grinding wheels for deburring and fettling on a straight grinder
MTE/13
BS ISO 2561:2006
Plastics. Determination of residual styrene monomer in polystyrene (PS) and impactresistant polystyrene (PS-I) by gas chromatography
PRI/82
BS ISO 603-13:1999
Grinding wheels for deburring and fettling on a vertical grinder
MTE/13
BS ISO 525:1999
Bonded abrasive products. General requirements
MTE/13
BS ISO 2697:1999
Diesel engines. Fuel nozzles. Size S
MCE/22
BS ISO 603-14:1999
Grinding wheels for deburring and fettling/snagging on an angle grinder
MTE/13
BS ISO 603:
Bonded abrasive products. Dimensions
BS ISO 2705:2006
Road vehicles. M12 x 1,25 spark plugs with flat seating and their cylinder head housings
MCE/9
BS ISO 603-1:1999
Grinding wheels for external cylindrical grinding between centres
MTE/13
BS ISO 603-15:1999
Grinding wheels for cutting-off on stationary or mobile cutting-off machines
MTE/13
BS ISO 2943:1998
Hydraulic fluid power. Filter elements. Verification of material compatibility with fluids
MCE/18
BS ISO 603-2:1999
Grinding wheels for centreless external cylindrical grinding
MTE/13
BS ISO 603-16:1999
Grinding wheels for cutting-off on hand-held power tools
MTE/13
BS ISO 3366:1999
Coated abrasives. Abrasive rolls
MTE/13
BS ISO 603-3:1999
Grinding wheels for internal cylindrical grinding
MTE/13
BS ISO 1085:1999
Assembly tools for screws and nuts. Doubleended wrenches. Size pairing
MTE/15
BS ISO 3534:
Statistics. Vocabulary and symbols
BS ISO 603-4:1999
Grinding wheels for surface grinding/peripheral grinding
MTE/13
BS ISO 1126:2006
Rubber compounding ingredients. Carbon black. Determination of loss on heating
PRI/50
BS ISO 3534-1:2006
General statistical terms and terms used in probability
SS/1
BS ISO 603-5:1999
Grinding wheels for surface grinding/face grinding
MTE/13
BS ISO 1304:2006
Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number
PRI/50
BS ISO 3534-2:2006
Applied statistics
SS/1
BS ISO 603-6:1999
Grinding wheels for tool and toolroom grinding
MTE/13
BS ISO 603-7:1999
Grinding wheels for manually guided grinding
MTE/13
BS ISO 3888:
Passenger cars. Test track for a severe lanechange manoeuvre
BS ISO 3888-1:1999
Double-lane change
AUE/15
BS ISO 3976:2006
Milk fat. Determination of peroxide value
AW/5
BS ISO 4093:1999
Diesel engines. Fuel injection pumps. Highpressure pipes for testing
MCE/22
29
BS ISO 6118:2006
Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70C max.)
PRI/69
BS ISO 8332:2006
Rubber compounding ingredients. Sulfur. Methods of test
PRI/23
BS ISO 4660:1999
Rubber, raw natural. Colour index test
PRI/50
Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
MCE/9
BS ISO 4688:
Iron ores. Determination of aluminium
BS ISO 4688-1:2006
Flame atomic absorption spectrometric method
ISE/58
BS ISO 8535-1:2006
Requirements for seamless cold-drawn singlewall tubes
MCE/22
BS ISO 4926:2006
Road vehicles. Hydraulic braking systems. Nonpetroleum-base reference fluids
PRI/69
BS ISO 6967:2006
Aircraft ground equipment. Main deck container/pallet loader. Functional requirements
ACE/57
BS ISO 9028:2006
Rubber. Dissolution by acid digestion
PRI/23
BS ISO 4928:2006
Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120C max.)
PRI/69
BS ISO 7975:2006
Passenger cars. Braking in a turn. Open-loop test method
AUE/15
BS ISO 9128:2006
Road vehicles. Graphical symbols to designate brake fluid types
PRI/69
BS ISO 4930:2006
Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150C max.)
PRI/69
BS ISO 8083:2006
Machinery for forestry. Falling-object protective structures (FOPS). Laboratory tests and performance requirements
AGE/29
BS ISO 9136:
Abrasive grains. Determination of bulk density
BS ISO 9136-2:2000
Microgrits
MTE/13
BS ISO 4992:
Steel castings. Ultrasonic examination
BS ISO 8118:
Textile machinery. Weaving machine temples
BS ISO 9628:2006
Rolling bearings. Insert bearings and eccentric locking collars. Boundary dimensions and tolerances
MCE/7
BS ISO 4992-1:2006
Steel castings for general purposes
ISE/6
BS ISO 8118-1:2006
Temple cylinders
TCI/33
BS ISO 4992-2:2006
Steel castings for highly stressed components
ISE/6
BS ISO 8118-2:2006
Full-width temples
TCI/33
BS ISO 9816:2006
Passenger cars. Power-off reaction of a vehicle in a turn. Open-loop test method
AUE/15
BS ISO 6020:
Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
BS ISO 8132:2006
Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Mounting dimensions for accessories
MCE/18/-/3
BS ISO 9844:2006
Oil of bitter orange (Citrus aurantium L.)
AW/54
BS ISO 6020-2:2006
Compact series
MCE/18/-/3
BS ISO 6022:2006
Hydraulic fluid power. Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
MCE/18/-/3
BS ISO 8178-11:2006
Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
MCE/14/-/3
BS ISO 10129:2006
Plain bearings. Testing of bearing materials. Resistance to corrosion by lubricants under static conditions
MCE/12
BS ISO 6101:
Rubber. Determination of metal content by atomic absorption spectrometry
BS ISO 10368:2006
Freight thermal containers. Remote condition monitoring
TW/1
30
BS ISO 10521:
Road vehicles. Road load
BS ISO 13674:
Road vehicles. Test method for the quantification of on-centre handling
BS ISO 15037:
Road vehicles. Vehicle dynamics test methods
BS ISO 10521-1:2006
Determination under reference atmospheric conditions
MCE/22
BS ISO 13990:
Textile machinery and accessories. Yarn feeders and yarn control for knitting machines
BS ISO 13990-1:2006
Vocabulary
TCI/33
Radial spherical and tapered roller bearings with cylindrical bore and outside surface
MCE/7
BS ISO 10770-2:1998
Test methods for three-way directional flow control valves
MCE/18
BS ISO 13990-3:2006
Dimensions for connecting and interconnection cables
TCI/33
Gas cylinders. Specification and testing of LPG cylinder valves. Manually operated
PVE/19
BS ISO 14245:2006
Gas cylinders. Specification and testing of LPG cylinder valves. Self-closing
PVE/19
BS ISO 14508:2006
Road vehicles. Spark plugs. Terminals
MCE/9
Agricultural irrigation equipment. PVC aboveground low-pressure pipe for surface irrigation. Specifications and test methods
AGE/30
BS ISO 11614:1999
Reciprocating internal combustion compressionignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
MCE/22
BS ISO 14512:1999
Passenger cars. Straight-ahead braking on surfaces with split coefficient of friction. Openloop test method
AUE/15
BS ISO 16234:2006
Heavy commercial vehicles and buses. Straightahead braking on surfaces with split coefficient of friction. Open-loop test method
AUE/15
BS ISO 11783:
Tractors and machinery for agriculture and forestry. Serial control and communications data network
BS ISO 14513:2006
Road vehicles. Pedestrian protection. Head impact test method
AUE/15
PD ISO/TR 16806:2003
Pneumatic fluid power. Cylinders. Load capacity of pneumatic slides and their presentation method
MCE/18/-/3
BS ISO 11783-8:2006
Power train messages
AGE/6
BS ISO 14531:
Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications
BS ISO 17087:2006
Specifications for adhesives used for finger joints in non-structural lumber products
PRI/52
BS ISO 12078:2006
Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Reference method)
AW/5
Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
CII/24
BS ISO 13292:2006
Copper, lead, zinc and nickel concentrates. Experimental methods for checking the bias of sampling
NFE/36
BS ISO 15003:2006
Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions
AGE/6
BS ISO 17500:2006
Aluminium oxide used for the production of primary aluminium. Determination of attrition index
CII/24
31
BS ISO 21308:
Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP)
BS ISO 23273-3:2006
Protection of persons against electric shock
PEL/69
BS ISO 23275:
Animal and vegetable fats and oils. Cocoa butter equivalents in cocoa butter and plain chocolate
BS ISO 21869:2006
Rubber compounding ingredients. Magnesium oxide. Methods of test
PRI/23
BS ISO 23275-1:2006
Determination of the presence of cocoa butter equivalents
AW/307
BS ISO 18898:2006
Rubber. Calibration and verification of hardness testers
PRI/20
BS ISO 19212:2006
Adhesives. Determination of temperature dependence of shear strength
PRI/52
Road vehicles. Holding test of coatings influencing the colour of light emitted by light sources). Test methods
AUE/1
BS ISO 23933:2006
Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135C/20 684 kPa (275F/3 000 psi) and 135C/21 000 kPa (275F/3 046 psi). Procurement specification
ACE/69
BS ISO 19472:2006
Machinery for forestry. Winches. Dimensions, performance and safety
AGE/29
BS ISO 22241:
Diesel engines. NOx reduction agent AUS 32
BS ISO 24134:2006
Industrial trucks. Additional requirements for automated functions on trucks
MHE/7
Quality requirements
MCE/22
BS ISO 22241-2:2006
Test methods
MCE/22
BS ISO 24335:2006
Laminate floor coverings. Determination of impact resistance
PRI/60
BS ISO 19813:2006
Road vehicles. Ignition systems. Test methods and requirements for high voltage boots on plug-top coils and pencil coils
MCE/9
BS ISO 22369:
Crop protection equipment. Drift classification of spraying equipment
BS ISO 24338:2006
Laminate floor coverings. Determination of abrasion resistance
PRI/60
BS ISO 19932:
Equipment for crop protection. Knapsack sprayers
BS ISO 22369-1:2006
Classes
AGE/15
BS ISO 24340:2006
Resilient floor coverings. Determination of thickness of layers
PRI/60
BS ISO 19932-1:2006
Requirements and test methods
AGE/15
BS ISO 22768:2006
Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
PRI/23
BS ISO 24341:2006
Resilient and textile floor coverings. Determination of length, width and straightness of sheet
PRI/60
BS ISO 19932-2:2006
Performance limits
AGE/15
BS ISO 20299-1:2006
Butadiene rubber (BR) and styrene-butadiene rubber (SBR)
PRI/50
BS ISO 23273-1:2006
Vehicle functional safety
PEL/69
Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
PEL/69
32
BS 8531
Code of practice for the performance of roof drainage systems in metal
B/542/6
DD CEN/TS WI 00260091
Fertilizers. Extraction of total sulfur present in various forms (Method 8.2)
CII/37
BS EN 46:
Wood preservatives. Determination of the preventive action against Hylotrupes bajalus (Linnaeus)
DD CEN/TS WI 00260093
Fertilizers. Extraction of water soluble sulfur where the sulfur is in various forms (Method 8.4)
CII/37
BS EN 46-1 (Revision)
Larvicidial effect (laboratory method) will supersede BS EN 46-1:2005
B/515
BS EN WI 00260113
Fertilizers. Determination of the fineness of grinding (dry procedure) (Method 7.1)
CII/37
BS EN WI 00383006:
Sustainably produced biomass for energy applications
DD CEN/TS 81:
Safety rules for the construction and installation of lifts
BS EN WI 00383006-6
Conformity assessment
PTI/20/-/5
BS 1133:
Packaging code
DD CEN/TS 81-83
Existing lifts
MHE/4
BS EN 175 (Revision)
Personal protection. Equipment for eye and face protection during welding and allied processes will supersede BS EN 175:1997
PH/2
BS 1133-8 (Revision)
Wooden boxes, cases and crates will supersede BS 1133-8:1991
PKW/0
BS EN WI 00121555
Welding. Use of (semi) automated phased array technology for examination of welds
WEE/46
BS 6891 (Revision)
Installation of low pressure gas pipework of up to 35 mm (R1 1/4) in domestic premises (2nd family gas). Specification will supersede BS 6891:2005+A2:2008
GSE/30
DD CEN/TS WI 00260080
Fertilizers. Extraction of phosphorus soluble in 2% formic acid (Method 3.1.2)
CII/37
BS EN ISO 204
Metallic materials. Uniaxial creep testing in tension. Method of test
ISE/NFE/4
BS EN ISO 286:
Geometrical product specifications (GPS). ISO code system for tolerances of linear sizes
BS EN ISO 286-1
Basis of tolerances, deviations and fits
TDW/4
Fertilizers. Extraction of phosphorus soluble in alkaline ammonium citrate according to Petermann at 65C (Method 3.1.5.1)
CII/37
BS 8517:
Code of practice for security dogs
BS 8517-2
Detection dogs
GW/3/-/15
BS EN 480-13 (Revision)
Reference masonry mortar for testing mortar admixtures will supersede BS EN 480-13:2002
B/517/3
Fertilizers. Extraction of phosphorus soluble in Joulies alkaline ammonium citrate (Method 3.1.5.3)
CII/37
BS EN 485:
Aluminium and aluminium alloys. Sheet, strip and plate
Fertilizers. Determination of the fineness of grinding of soft natural phosphates (Method 7.2)
CII/37
BS EN 485-1:2008/Amendment 1
Technical conditions for inspection and delivery
NFE/35/5
33
BS EN ISO 1288-5
Coaxial double-ring test on flat specimens with small test surface areas
B/520
BS EN 1889:
Machines for underground mines. Mobile machines working underground. Safety
Rail locomotives
MRE/1
BS EN 957:
Stationary training equipment
BS EN 1948:
Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs
BS EN 957-6 (Revision)
Treadmills, additional specific safety requirements and test methods will supersede BS EN 957-6:2001
SW/136/4
BS EN 1418 (Revision)
Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials will supersede BS EN 1418:1998
WEE/36
BS EN 1948-4 (Revision)
Sampling and analysis of dioxin-like PCBs will supersede DD CEN/TS 1948-4:2007
EH/2/1
BS EN 1034:
Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines
BS EN 1591:
Flanges and their joints. Design rules for gasketed circular flange connections
BS EN ISO 4254:
Agricultural machinery. Safety
BS EN 1034-16
Paper and boardmaking machines
MCE/3/9
BS EN 1591-1:2001/Amendment 1
Calculation method
PSE/15
BS EN ISO 4254-10
Rotary tedders and rakes
AGE/32
BS EN ISO 1043:
Plastics. Symbols and abbreviated terms
BS EN 1708:
Welding. Basic weld joint details in steel
PD CEN/TR 4680
Aerospace series. Contacts, electrical, qualification for change of materials and process
ACE/6
BS EN 1708-3
Plating, buttering, lining of pressurized components
WEE/-/1
BS EN ISO 7779:2001/Amendment 2
Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment
EH/1
BS EN 1127:
Explosive atmospheres. Explosion prevention and protection
BS EN 1760:
Safety of machinery. Pressure sensitive protective devices
BS EN 1127-1 (Revision)
Basic concepts and methodology will supersede BS EN 1127-1:2007
FSH/23
BS EN ISO 9117-1
Determination of through-dry state and through-dry time
STI/10
BS EN ISO 1288:
Glazing in building. Determination of the bending strength of glass
BS EN 1760-3:2004/Amendment 1
General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
MCE/3
BS EN ISO 10218:
Robots for industrial environments. Safety requirements
BS EN ISO 1288-1
Fundamentals of testing glass
B/520
BS EN 1807-1 (Revision)
Table band saws and band re-saws
BS EN ISO 1288-3
Test with specimen supported at two points (four-point bending)
B/520
BS EN ISO 10848:
Acoustics. Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms
BS EN ISO 10848-4
All other cases
EH/1
34
BS EN ISO 11114:
Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents
BS EN 13463:
Non-electrical equipment intended for use in potentially explosive atmospheres
BS EN 14774-2 (Revision)
Total moisture. Simplified method will supersede DD CEN/TS 14774-2:2004
PTI/17
BS EN 13463-5 (Revision)
Protection by constructional safety c will supersede BS EN 13463-5:2003
FSH/23/-/2
BS EN 14774-3 (Revision)
Moisture in general analysis sample will supersede DD CEN/TS 14774-3:2004
PTI/17
BS EN 13617:
Petrol filling stations
Solid biofuels. Method for the determination of ash content will supersede DD CEN/TS 14775:2004
PTI/17
BS EN 12321:2003/Amendment 1
Underground mining machinery. Specification for the safety requirements of armoured face conveyors
MRE/1
Solid biofuels. Method for the determination of calorific value will supersede DD CEN/TS 14918:2005
PTI/17
BS EN 12597 (Revision)
Bitumen and bituminous binders. Terminology will supersede BS EN 12597:2000
PTI/13
BS EN ISO 13628:
Petroleum and natural gas industries. Design and operation of subsea production systems
BS EN 14938:
Copper and copper alloys. Determination of bismuth content
BS EN 12697:
Bituminous mixtures. Test methods for hot mix asphalt
BS EN ISO 13628-1:2005/Amendment 1
General requirements and recommendations
PSE/17/-/4
BS EN 14938-2 (Revision)
FAAS method will supersede DD CEN/TS 14938-2:2006
NFE/34
BS EN 12697-5 (Revision)
Determination of the maximum density will supersede BS EN 12697-5:2002
B/510/1
BS EN ISO 13628-1:2005/Amendment 2
General requirements and recommendations
PSE/17/-/4
BS EN ISO 15011:
Health and safety in welding and allied processes. Laboratory method for sampling fume and gases
Welding consumables. Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels. Classification will supersede BS EN ISO 14343:2007
WEE/39
BS EN 13263:
Silica fume for concrete
BS EN 14476:2005/Amendment 2
Chemical disinfectants and antiseptics. Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine. Test method and requirements (phase 2, step 1)
CH/216
BS EN 13263-2:2005/Amendment 1
Conformity evaluation
B/517/4
BS EN 14774-1 (Revision)
Total moisture. Reference method will supersede DD CEN/TS 14774-1:2004
PTI/17
Flame atomic absorption spectrometry method (FAAS) will supersede DD CEN/TS 15023-3:2006
NFE/34
35
BS EN 15376:2007/Amendment 1
Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods
PTI/2
BS EN 15916:
Copper and copper alloys. Determination of tellurium content
BS EN 15916-2 BS EN 15605
Medium tellurium content. Flame atomic absorption spectrometric method (FAAS)
NFE/34
BS EN ISO 15027:
Immersion suits
Copper and copper alloys. Inductively coupled plasma optical emission spectrometric
NFE/34
BS EN 15927
Services offered by hearing aid professionals
EH/1/1
Reinforcing bars, wire rod and wire will supersede BS EN ISO 15630-1:2002
ISE/9
BS EN 15037:
Precast concrete products. Beam-and-block floor systems
BS EN ISO 17072:
Leather. Chemical determination of metal content
BS EN 15037-4
Polystyrene blocks
B/524
BS EN 15708
Water quality. Guidance standard for the surveying, sampling and laboratory analysis of phytobenthos in shallow running water
EH/3/5
BS EN ISO 17072-1
Extractable metals
TCI/69
BS EN 15103 (Revision)
Solid biofuels. Methods for the determination of bulk density will supersede DD CEN/TS 15103:2005
PTI/17
BS EN 15749 (Revision)
Fertilizers. Determination of sulfates content using three different methods will supersede DD CEN/TS 15749:2008
CII/37
BS EN ISO 17072-2
Total metal content
TCI/69
BS EN 15148 (Revision)
Solid biofuels. Method for the determination of the content of volatile matter will supersede DD CEN/TS 15148:2005
PTI/17
BS EN 15210:
Solid biofuels. Method for the determination of mechanical durability of pellets and briquettes
BS EN ISO 20349
Personal protective equipment. Footwear protecting against molten metal splash. Requirements and test methods
PH/1
Foodstuffs. Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection
AW/-/3
BS EN ISO 22476:
Geotechnical investigation and testing. Field testing
BS EN 15293
Automotive fuels. Ethanol E85. Requirements and test methods
PTI/2
PD CEN/TR 15913
Layout criteria for viewing area for spectators with special needs
B/552
BS EN ISO 22476-4
Mnard pressure meter test
B/526/3
DD CEN/TS 15366
Winter and road service area maintenance equipment. Solid absorbents intended for road usage
B/513
BS EN 15915
Copper and copper alloys. Determination of silver content. Flame atomic absorption spectrometric method (FAAS)
NFE/34
BS EN ISO 23277
Non-destructive testing of welds. Penetrant testing of welds. Acceptance levels will supersede BS EN 1289:1998
WEE/46
36
BS EN ISO 23278
Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels will supersede BS EN 1291:1998
WEE/46
BS ISO 36 (Revision)
Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics will supersede BS ISO 36:2005
PRI/22
BS ISO 1219:
Fluid power systems and components. Graphic symbols and circuit diagrams
BS ISO 37 (Revision)
Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties will supersede BS ISO 37:2005
PRI/22
BS EN 60061-2:1997/Amendment 40
Lampholders
CPL/34/2
BS ISO 1407
Rubber. Determination of solvent extract will supersede BS 7164-3:1992
PRI/22
BS ISO 105:
Textiles. Tests for colour fastness
BS EN 60061-3:1997/Amendment 41
Gauges
CPL/34/2
BS ISO 105-A11
Determination of colour fastness grades by digital imaging techniques
TCI/81
BS EN 60512:
Connectors for electronic equipment. Tests and measurements
BS EN 60512-99-001
Test schedules. Mechanical operation, unmating connectors under electrical load, applicable to IEC 60603-7 series connectors and IEC 61076-3-1xx connectors having the IEC 60603-7 series mating interface.
EPL/48
BS ISO 1853
Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
PRI/22
BS EN 60695:
Fire hazard testing
BS EN 60695-7-1 (Revision)
Toxicity of fire effluent. General guidance will supersede BS EN 60695-7-1:2004
GEL/89
PD ISO/TR 230:
Test code for machine tools
BS EN 61169:
Radio-frequency connectors
PD ISO/TR 230-11
Measuring instruments and their application to machine tool geometry tests
BS ISO 2811:
Paints and varnishes. Determination of density
BS EN 61169-14
R.F. coaxial connectors with inner diameter of outer conductor with 12 mm (0.472 in) with screw coupling. Characteristic impedance 75 ohms (Type 3.5/12)
EPL/46/2
MTE/1
BS EN 61820
Electrical installation for lighting and beaconing of aerodromes. Constant current series circuits aeronautical ground lighting. System design and installation requirements
EPL/97
BS ISO 248-1
Hot-mill method and oven method
PRI/23
BS ISO 630:
Structural steels
BS ISO 630-1
General delivery conditions for hot rolled products
ISE/12
BS EN ISO 80601-2-55
Particular requirements for the basic safety and essential performance of respiratory gas monitors will supersede BS EN ISO 21647:2004
CH/121/1
BS ISO 630-2
Technical delivery conditions for non alloy structural steels for general purpose
ISE/12
37
BS ISO 3720
Black tea. Definition and basic requirements will supersede BS 6048:1987
AW/90
BS ISO 4664:
Rubber, vulcanized or thermoplastic. Determination of dynamic properties
BS ISO 3864:
Graphical symbols. Safety colours and safety signs
BS ISO 3864-1
Design principles for safety signs and safety markings
PH/8/1
BS ISO 4919
Textile floor coverings. Determination of tuft withdrawal force
PRI/3/60
Testing machine
BS ISO 3972
Sensory analysis. Methodology. Method of investigating sensitivity of taste will supersede BS 5929-7:1992
AW/12
ISE/NFE/4
BS ISO 4965-2
Dynamic Calibration Device (DCD) instrumentation
ISE/NFE/4
BS ISO 4126:
Safety devices for protection against excessive pressure
BS ISO 5530:
Wheat flour. Physical characteristics of doughs
BS ISO 5530-1
Determination of water absorption and rheological properties using a farinograph will supersede BS 4317-20:1989
AW/4
BS ISO 5692:
Agricultural vehicles. Mechanical connections on towed vehicles
BS ISO 3394
Specification for plan dimensions of rigid rectangular transport packages with a modular relationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads will supersede BS 6837:1987
PKW/0
BS ISO 5692-3
Swivel hitch rings
AGE/6
BS ISO 3534:
Statistics. Vocabulary and symbols
BS ISO 5794-1:2005/Amendment 1
Non-rubber tests
PRI/23
BS ISO 5814
Water quality. Determination of dissolved oxygen. Electrochemical probe method
EH/3/2
BS ISO 4397
Fluid power systems and components. Connectors and associated components. Nominal outside diameters of tubes and nominal size of hoses
MCE/18/-/4
BS ISO 3676
Packaging. Unit load sizes. Dimensions
PKW/0
38
BS ISO 6162:
Hydraulic fluid power. Flange connectors with split or one-piece flange clamps and metric or inch screws
BS ISO 6747
Earth-moving machinery. Tractor-dozers. Terminology and commercial specifications will supersede BS 6914-6:1999
B/513/1
BS ISO 7010:2003/Amendment 72
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 7010:2003/Amendment 62
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 7010:2003/Amendment 73
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 6358:
Pneumatic fluid power. Determination of flowrate characteristics of components using compressible fluids
BS ISO 7010:2003/Amendment 63
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 7010:2003/Amendment 74
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 6358-5
Method for calculating flow-rate characteristics for groups of components
MCE/18/-/5
BS ISO 7010:2003/Amendment 64
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 7010:2003/Amendment 75
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 6474:
Implants for surgery. Ceramic materials
BS ISO 6474-2
Composite materials based on a high purity alumina matrix with zirconia reinforcement
CH/150/1
BS ISO 7010:2003/Amendment 65
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 7010:2003/Amendment 76
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 6489:
Agricultural vehicles. Mechanical connections between towed and towing vehicles
BS ISO 7010:2003/Amendment 66
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 7010:2003/Amendment 77
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 6489-5
Specifications for non swivel clevis couplings
AGE/6
BS ISO 7010:2003/Amendment 67
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 7133
Earth-moving machinery. Tractor-scrapers. Terminology and commercial specifications will supersede BS 6914-9:1996
B/513/1
BS ISO 6565
Tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods. Standard conditions and measurement will supersede BS 5381-5:1999
AW/40
BS ISO 7010:2003/Amendment 68
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
BS ISO 7203:
Fire extinguishing media. Foam concentrates
BS ISO 6666
Coffee triers will supersede BS 6379-3:1983
AW/15
BS ISO 7010:2003/Amendment 69
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
Specification for medium and high expansion foam concentrates for top application to waterimmiscible liquids will supersede BS ISO 7203-2:1995
FSH/18/3
BS ISO 6741:
Textiles. Fibres and yarns. Determination of commercial mass of consignments
BS ISO 7203-3
Specification for low expansion foam concentrates for top application to watermiscible liquids
FSH/18/3
Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas
PH/8/1
39
BS ISO 8124:
Safety of toys
BS ISO 9092
Textiles. Nonwovens. Definition will supersede BS EN 29092:1992
TCI/24
BS ISO 8255:
Optics and optical instruments. Microscopes. Cover glasses
BS ISO 7207:
Implants for surgery. Components for partial and total knee joint prostheses
BS ISO 8255-1
Dimensional tolerances, thickness and optical properties will supersede BS 7011-3.1:1989
CPW/172/5
BS ISO 7207-2
Articulating surfaces made of metal, ceramic and plastics materials will supersede BS 7251-14:1998
CH/150/4
BS ISO 9241:
Ergonomics of human-system interaction
BS ISO 8455
Green coffee in bags. Guidance on storage and transport will supersede BS 6827:1987
AW/15
BS ISO 9241-100
Introduction to standards related to software ergonomics
PH/9
BS ISO 7240:
Fire detection and alarm systems
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness
BS ISO 9344
Optics and optical instruments. Microscopes. Graticules for eyepieces will supersede BS 7012-8:1997
CPW/172/5
PD ISO/TR 7250-2
Statistical summaries of body measurements from individual ISO populations
PH/9/4
BS ISO 8586:
Sensory analysis. General guidance for the selection, training and monitoring of assessors
BS ISO 9459-4
System performance characterization by means of component tests and computer simulation
RHE/25
BS ISO 8000-120
Master data. Provenance
AMT/4
BS ISO 8637
Cardiovascular implants and artificial organs. Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators will supersede BS 7297-1:1990
CH/150/2
BS ISO 8038
Microscopes. Screw threads for objectives and related nosepieces will supersede BS 7012-4.1:1998
CPW/172/5
BS ISO 9698
Water quality. Determination of tritium activity concentration. Liquid scintillation counting method
EH/3
BS ISO 8638
Cardiovascular implants and artificial organs. Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters will supersede BS 7297-2:1990
CH/150/2
BS ISO 10018
Quality management. Guidelines on people involvement and competences
QS/1
BS ISO 8091
Textiles. Twist factor related to the tex system
TCI/24
40
BS ISO 10041:
Pneumatic fluid power. Electrically modulated pneumatic flow rate control valves
DD ISO/TS 10303:
Industrial automation systems and integration. Product data representation and exchange
BS ISO 10786
Space systems. Structural components and assemblies
ACE/68/-/1
BS ISO 10041-1
Main characteristics to include in the suppliers literature for three-port control valves
MCE/18/-/5
DD ISO/TS 10303-433
Application module. AP 233 systems engineering
AMT/4
BS ISO 10788
Space systems. Lunar dust simulant
ACE/68/-/4
BS ISO 10041-2
Test methods to determinate main characteristics to include in the suppliers literature for three-port control valves
MCE/18/-/5
BS ISO 10392
Road vehicles. Determination of centre of gravity will supersede BS AU 246:1992
AUE/15
BS ISO 10789
Space systems. Programme management. Information and documentation management
ACE/68/-/5
BS ISO 10077:
Thermal performance of windows, doors and shutters. Calculation of thermal transmittance
BS ISO 10542:
Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems
BS ISO 10794
Space systems. Programme management. Material, mechanical parts and processes
ACE/68/-/5
BS ISO 10795
Space systems. Programme management. Vocabulary
ACE/68/-/5
BS ISO 10094:
Pneumatic fluid power. Electrically modulated pneumatic pressure control valves
BS ISO 10571
Specification for tyres and wheels. Tyres. Offthe-road tyres. Specification for tyres for mobile cranes and similar specialized machines will supersede BS AU 50-1.3.3:1996
AUE/4
BS ISO 10830
Space systems. Non-destructive testing. Method of automatic ultrasonic inspection of graphite ingot for solid rocket motor
ACE/68/-/8
BS ISO 10094-1
Main characteristics to include in the suppliers literature
MCE/18/-/5
BS ISO 10711
Intelligent transport systems. Interface protocol and message set definition between traffic signal controllers and detectors (IPMSTSCD)
EPL/278
DD ISO/TS 10832
Soil quality. Effects of pollutants on mycorrhizal fungi
EH/4
BS ISO 10094-2
Test methods to determine main characteristics to include in the suppliers literature
MCE/18/-/5
BS ISO 10772
Test method for pore size determination under turbulent water flow conditions
B/553
BS ISO 10870
Water quality. Guidance on the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters
EH/3/5
BS ISO 10159
Health informatics. ISO/web access resource manifest
IST/35
BS ISO 10776
Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, under load
B/553
BS ISO 10905
Lunar dust creation, suspension and transport
ACE/68/-/4
BS ISO 10784:
Space systems. Early operations
Soil quality. Measurement of stability of soil aggregates to assess the sensitivity to crusting and water erosion
EH/4
BS ISO 10303:
Industrial automation systems and integration
BS ISO 10784-2
Initialization plan
ACE/68/-/2
BS ISO 10988
Equipment for crop protection. Knapsack combustion engine driven mitblowers. Test method and performance limits
AGE/15
BS ISO 10303-52
Integrated generic resource. Mesh-based topology
AMT/4
BS ISO 10784-3
Commisioning report
ACE/68/-/2
BS ISO 10785
Space systems. Bellows. Design and operation
ACE/68/-/1
41
BS ISO 11227
Space systems. Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact
ACE/68
BS ISO 11350
Water quality. Determination of the genotoxicity of water and waste water. Salmonella/microsome fluctuation test (Ames fluctuation test)
EH/3/5
BS ISO 11229
Space systems. Requirements for manufacturing and procurement of threaded fasteners
ACE/68
BS ISO 11356
Crop protection equipment. Spray parameter recording for traceability
AGE/15
BS ISO 11230
Space systems. Standard methods for mechanical testing of metallic materials
ACE/68
BS ISO 11368
Building environment design. Energy performance of buildings. Methodology to assess the overall energy and environmental impact by using a holistic (complete) approach procedure
RHE/2
BS ISO 11026
Heavy commercial vehicles and buses. Test method for roll stability. Closing curve test
AUE/15
BS ISO 11231
Space systems. Probabilistic Risk Assessment (PRA)
ACE/68/-/5
BS ISO 11396
Crocodile skins. Description of defects, grading on the basis of defects and size
BS ISO 11037
Sensory analysis. General guidance and test method for assessment of the colour of foods will supersede BS 5929-10:1999
AW/12
BS ISO 11232
Space systems. Spacecraft to launch vehicle interfaces
ACE/68
TCI/69
BS ISO 11398
Raw ostrich skins. Description of defects, preservation and grading
TCI/69
BS ISO 11039
Standards on the definition and measurement methods of drift rates of SPMs
CII/60
BS ISO 11250
Mechanical female contraceptive devices. Tubal ligation/fallopian rings
CH/157
BS ISO 11504
Soil quality. Assessment of impact from soil contaminated with mineral oil
EH/4
DD ISO/TS 11059
Milk and milk products. Method for the enumeration of Pseudomonas spp.
AW/5
PD ISO/TR 11583:
Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits running full
BS ISO 11132
Sensory analysis. Methodology. General guidance for monitoring the performance of a quantitative sensory panel
AW/12
BS ISO 11269:
Soil quality. Determination of the effects of pollutants on soil flora
PD ISO/TR 11583-1
General principles and requirements
CPI/30/2
BS ISO 11137:
Sterilization of health care products. Radiation
BS ISO 11619
Specification for polyurethane tubing for use primarily in pneumatic installations
PRI/66/-/1
Method for the measurement of inhibition of root growth will supersede BS 7755-4.3.1:1994
EH/4
BS ISO 11156
Guidelines for all people including elderly persons and persons with disabilities. Packaging and receptacles
PKW/0/-/5
BS ISO 11672
Connectors for fluid power and general use. Designation and nomenclature
MCE/18/-/4
BS ISO 11221
Space systems. Space solar panels. Spacecraft charging induced electrostatic discharge test materials
ACE/68
BS ISO 11287
Green tea. Definition and basic requirements
AW/90
BS ISO 11680:
Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners
Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation will supersede BS EN ISO 11341:2004
STI/10
42
BS ISO 11783-5
Network management
AGE/32
BS ISO 11891
Hot formed helical compression springs. Technical specifications
GME/15
Agricultural and forestry machinery. Safety requirements and testing for portable handheld powered brush-cutters and grass-trimmers
BS ISO 11892
Space systems. Subsystems/units to spacecraft interface control document
ACE/68/-/2
BS ISO 11706
Carbonaceous materials for the production of aluminium. Prebaked anodes. Determination of the fracture energy
CII/24
BS ISO 11893
Space systems. Programme management. Project organization
ACE/68/-/5
BS ISO 11915
Communications access for land mobiles. High speed, air interface parameters and protocols for broadcast, point-point, vehicle-vehicle, and vehicle-point communications in the ITS Sector using IEEE802.11 wireless LAN standard in normal operational modes
EPL/278
BS ISO 11709
Soil quality. Determination of selected coal-tar derived phenolic compounds using high performance liquid chromatography (HPLC)
EH/4
PD ISO/TR 11827
Textiles. Composition testing. Identification of fibres
BS ISO 11746
Rice. Determination of biometric characteristics of kernels
AW/4
TCI/80
BS ISO 11747
Rice. Determination of cooked rice kernel hardness index
AW/4
AGE/29
BS ISO 11916-1
Method using HPLC
EH/4
BS ISO 11764
Clinical laboratory testing. Susceptibility testing of fungi
CH/212
BS ISO 11926:
Connections for general use and fluid power. Ports and stud ends with ISO 725 threads and O-ring sealing
BS ISO 11855:
Building environment design. Radiant heating and cooling system
PD ISO/TR 11766
Lawful Interception in ITS and CALM
EPL/278
BS ISO 11926-1
Ports with O-ring seal intruncated housing
MCE/18/-/4
BS ISO 11855-3
Design and dimensioning
RHE/2
PD ISO/TR 11769
Data retention for law enforcement in ITS and CALM
EPL/278
PD ISO/TR 11773
Reference materials transportation
RMI/1
BS ISO 11855-5
Installation and commissioning
RHE/2
BS ISO 11926-3
Light-duty (L series) stud ends
MCE/18/-/4
BS ISO 11775
Surface chemical analysis. Scanning probe microscopy. Determination of cantilever normal spring constants
CII/60
BS ISO 11855-6
Operation and control
RHE/2
BS ISO 11926-4
Dimensions, design, test methods and requirements for external and internal hex port plugs
MCE/18/-/4
BS ISO 11783:
Tractors and machinery for agriculture and forestry. Serial control and communications data network
BS ISO 11855-7
Electric heating system
RHE/2
DD ISO/TS 11931:
Nanotechnologies. Nano-calcium carbonate
DD ISO/TS 11931-1
Characteristics and measurement methods
NTI/1/-/4
43
BS ISO 12133
Small craft. Carbon monoxide detection systems
GME/33
PD ISO/TR 12309
Health informatics. Guidelines for establishing international healthcare terminology standardisation
IST/35
BS ISO 11937-1
Characteristics and measurement methods
NTI/1/-/4
PD ISO/TR 12134
Rubber. Estimation of uncertainty for rubber test methods. Non-functional parameters
PRI/22
BS ISO 12313
Colorants. Test method for the detection and determination of certain listed amines derived from azo colorant in dyestuffs
TCI/66
BS ISO 11939
Standards on the measurement of angle between an AFM tip and surface and its certified reference material
CII/60
DD ISO/TS 12144
Nanotechnologies. Core terms. Terminology and definitions
NTI/1
BS ISO 12315
Aluminium oxide primarily used for production of aluminium. Method for calculating the Al2O3 content of smelter-grade alumina
CII/24
BS ISO 11952
Guideline for the determination of geometrical quantities using scanning probe microscopes. Calibration of measuring systems
CII/60
BS ISO 12180:
Geometrical product specifications (GPS). Cylindricity
BS ISO 12013:
Paints and varnishes. Measurement of physical properties of paints on a substrate using a free damped oscillation method
BS ISO 12406
Surface chemical analysis. Secondary ion mass spectrometry. Method for depth profiling of arsenic in silicon
CII/60
BS ISO 12013-1
Measurement of curing temperature
STI/10
BS ISO 12181:
Geometrical product specifications (GPS). Roundness
BS ISO 12603
Building construction machinery and equipment. Classification will supersede DD 237:1996
B/513
BS ISO 12025
Nanomaterials. General framework for determining nanoparticle content in nanomaterials by generation of aerosols
NTI/1
BS ISO 12204
Road vehicles. Ergonomic aspects of transport information and control systems. Principles and guidelines for the integration of time-sensitive and safety-critical warning signals in road vehicles
AUE/12
BS ISO 12617
Liquefied natural gas vehicles. Connector for reflueling vehicles
GSE/40
BS ISO 12030
Tobacco and tobacco products. Non-destructive detection of lamina density deviation in case. Ionizing radiation method
AW/40
BS ISO 12208
Space systems. Space environment (natural and artificial). Proton (3-10 Mev) fluence estimation at Geostationary Earth Orbits (GEO) for solar panel degradation
ACE/68/-/4
BS ISO 12619:
Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/methane blends fuel components
BS ISO 12077
Space systems. Space environment (natural and artificial). Trapped electron flux model for Geostationary Earth Orbits (GEO)
ACE/68/-/4
BS ISO 12219:
Indoor air. Road vehicles
BS ISO 12619-1
General requirements and definitions
GSE/40
BS ISO 12219-1
Whole vehicle test chamber. Specification and method for the determination of volatile organic compounds in car interiors
EH/2/3
BS ISO 12619-2
Performance and general test methods
GSE/40
44
BS ISO 12619-3
Pressure regulator
GSE/40
BS ISO 12830
Paper, board and pulps. Determination of acidsoluble magnesium, calcium, manganese, iron, copper, sodium and potassium
PAI/11
BS ISO 12670
Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions
STI/41
BS ISO 12781:
Geometrical product specifications (GPS). Flatness
BS ISO 12842
Energy performance of buildings. Definitions and general procedures for the overall energy performance rating and certification
B/540
BS ISO 12671
Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
STI/41
DD ISO/TS 12843
Nanotechnologies. Terminology for medical, health and personal care applications
NTI/1
BS ISO 12846
Water quality. Determination of mercury. Method using atomic absorption spectrometry (AAS) with and without enrichment
EH/3/2
BS ISO 12679
Thermal spraying. Recommendations for thermal spraying
STI/41
BS ISO 12782:
Soil quality. Parameters for geochemical modelling of leaching and specification of constituents in soils and soil materials
BS ISO 12690
Thermal spraying. Thermal spray coordination. Tasks and responsibilities
STI/41
Water quality. Detection and quantification of Legionella and/or Legionella pneumophila by concentration and genic amplification by polymerase chain reaction (RT-PCR)
EH/3/4
BS ISO 12875
Traceability of fishery products. Specification on the information to be recorded in captured fish distribution chains
AW/234
BS ISO 12878
Environmental monitoring of marine fish farms
AW/234
BS ISO 12749-1
Radiation protection
NCE/2
BS ISO 12782-4
Extraction of humic substances from solid samples
EH/4
DD ISO/TS 12901:
Nanotechnologies
BS ISO 12750
Thermal spraying. Determination of residual stress of plasma spray ceramic coatings by x-ray diffraction method
STI/41
BS ISO 12778
Vitreous and porcelain enamels. Glass lined flanged steel pipes and flanged steel fittings. Quality requirements
STI/41
Soil quality. Microwave assisted extraction of aqua regia soluble fraction for the determination of trace and major elements
EH/4
BS ISO 12779
Lactose. Determination of water content. Karl Fischer method
AW/5
DD ISO/TS 12805
Nanomaterials. Guidance on specifying nanomaterials
NTI/1/-/4
DD ISO/TS 12921
Nanotechnologies. Terminology and definitions for nanostructured materials
NTI/1
BS ISO 12780:
Geometrical product specifications (GPS). Straightness
DD ISO/TS 12808
Nanotechnology. Terminology for the bio-nano interface
NTI/1
BS ISO 12931
Performance requirements for purpose-built anti-counterfeiting tools
SSM/1/1
BS ISO 12824
Royal jelly. Specifications
AW/90
BS ISO 12933
Agricultural tractors. Requirements for braking
AGE/6
45
BS ISO 13102
Geometrical product specifications (GPS). Dimensional measuring equipment. Dial gauges (electronic digital). Design and metrological characteristics
TDW/4
BS ISO 13260
Thermoplastics piping systems for non pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
PRI/88/1
BS ISO 12951
Textile floor coverings. Determination of mass loss using the Lisson test
PRI/3/60
BS ISO 13106
Blow-moulded polypropylene containers for packaging of liquid foodstuffs
PRI/75
BS ISO 13262
Thermoplastics piping systems for non pressure underground drainage and sewerage. Thermoplastics spirally-formed structures-wall pipes. Determination of the tensile strength of a seam
PRI/88/1
BS ISO 12962
Implants for surgery. Active implantable medical devices. Pacemaker magnet mode response
CH/150/6
PD ISO/TR 13121
Nanotechnologies. Nanomaterial risk evaluation framework
NTI/1
BS ISO 13263
Thermoplastics piping systems for non pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
PRI/88/1
BS ISO 13013
Nanotechnologies. Terminology for nanoscale measurement and instrumentation
NTI/1
PD ISO/TR 13014
Nanotechnologies. Guidance on physicochemical characterization of engineered nanoscale materials for toxicologic assessment
NTI/1
BS ISO 13264
Thermoplastics piping systems for non pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength of flexibility of fabricated fittings
PRI/88/1
BS ISO 13229
Thermoplastics piping systems for non pressure applications. Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings. Determination of the viscosity number and K-value
PRI/88/1
PD ISO/TR 13028
Information and documentation. Implementation guidelines for digitisation of records
IDT/2/17
BS ISO 13265
Thermoplastics piping systems for non pressure underground drainage and sewerage. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
PRI/88/1
BS ISO 13072
Road vehicles. Brake lining. Shear test procedure for disc brake pad and drum brake shoe assemblies
AUE/11
BS ISO 13266
Thermoplastics piping systems for non pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
PRI/88/1
BS ISO 13254
Thermoplastics piping systems for non-pressure applications. Test method for watertightness
BS ISO 13077:
Implants for surgery. Flexibility testing of spinal segments
PRI/88/1
BS ISO 13077-1
Hybrid protocol
CH/150/5
Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for airtightness of joints
PRI/88/1
BS ISO 13081
Animal and vegetable fats and oils. Determination of saponification value (SV). Indirect method-using Gas Liquid Chromatography Method (GLC)
AW/307
BS ISO 13257
Thermoplastics piping systems for non pressure applications. Test method for resistance to elevated temperature cycling
PRI/88/1
BS ISO 13268
Thermoplastics piping systems for non pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
PRI/88/1
Thermoplastics piping systems for underground non pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
PRI/88/1
BS ISO 13288
Passenger car road wheels. Biaxial fatigue test method
AUE/4
46
BS ISO 13408:
Aseptic processing of health care products
BS ISO 14253:
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments
BS ISO 14644:
Cleanrooms and associated controlled environments
BS ISO 13408-7
Cell based health care products
CH/198
Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 will supersede BS EN ISO 14644-2:2000
LBI/30
BS ISO 13849:
Safety of machinery. Safety-related parts of control systems
DD ISO/TS 14253:
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment
PD ISO/TR 14880:
Optics and photonics. Microlens arrays
BS ISO 13960
Cardiovascular implants and artificial organs. Plasma filters
CH/150/2
DD ISO/TS 14253-4
Considerations for choosing decision rules
TDW/4
PD ISO/TR 14880-5
Guidance on testing
CPW/172/9
Road transport and traffic telematics. Electronic fee collection. Test procedures for user and fixed equipment
BS ISO 14045
Eco-efficiency assessment. Principles and requirements
SES/1/5
BS ISO 14490:
Optics and photonics. Test methods for telescopic systems
BS ISO 14051
Environmental management. Material flow cost accounting. General principles and framework
SES/1
BS ISO 14490-8
Test methods for night-vision devices
CPW/172/4
BS ISO 14223:
Radiofrequency identification of animals. Advanced transponders
BS ISO 14223-3
Applications
AGE/32
BS ISO 14242:
Implants for surgery. Wear of total hip joint prostheses
DD ISO/TS 15029:
Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids
DD ISO/TS 15029-3
Spray tests, large scale method
PTI/13
47
BS ISO 15500-18
Filter
GSE/40
BS ISO 16000:
Indoor air
Fittings
GSE/40
BS ISO 16242
Surface chemical analysis. Recording and reporting data in auger electron spectroscopy (AES)
CII/60
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Techniques for determining the uncertainty of measurement
BS ISO 16243
Surface chemical analysis. Recording and reporting data in x-ray photoelectron spectroscopy (XPS)
CII/60
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement
BS ISO 15500:
Road vehicles. Compressed natural gas (CNG) fuel system components
DD ISO/TS 16610:
Geometrical product specifications (GPS). Filtration
BS ISO 15500-3
Check valve
GSE/40
BS ISO 15531:
Industrial automation systems and integration. Industrial manufacturing management data
DD ISO/TS 16610-28
Profile filters. End effects
TDW/4
BS ISO 16612:
Graphic technology. Variable data exchange
BS ISO 15500-6
Automatic valve
GSE/40
BS ISO 16612-2
Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2)
PAI/43
BS ISO 15500-9
Pressure regulator
GSE/40
Mobile elevating work platforms. Special features. Design, calculations, safety requirements and test methods relative to special features
BS ISO 15500-14
Excess flow valve
GSE/40
BS ISO 16653-3
MEWPs for orchard operations
MHE/12/-/1
BS ISO 15500-16
Rigid fuel line
GSE/40
BS ISO 15883:
Washer-disinfectors
BS ISO 16844:
Road vehicles. Tachograph systems
Requirements and tests for general purpose washer-disinfector employing thermal disinfection
CH/198
BS ISO 16844-2
Recording unit, electrical interface
AUE/16
48
BS ISO 16844-3
Motion sensor interface
AUE/16
BS ISO 18292
Energy performance of fenestration systems. Calculation procedure
B/540/2
BS ISO 19125:
Geographic information. Simple feature access
BS ISO 18409
Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
MCE/18/-/4
BS ISO/IEC 17021-2
Requirements for third party certification auditing of management systems
CAS/1
BS ISO 17209
Hydraulic fluid power. Two-, three- and fourport screw-in cartridge valves. Cavities with UN and UNF threads
MCE/18/-/5
BS ISO 18436:
Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel
BS ISO 19148
Geographic information. Location based services. Linear referencing system
IST/36
BS ISO 19156
Geographic information. Observations and measurements
IST/36
BS ISO 18632
Alloyed steel. Determination of manganese. Potentiometric and visual titration method
ISE/18
BS ISO 17450:
Geometrical product specifications (GPS). General concepts
PD ISO/TR 19201
Introduction and overview about machinery vibration standards
GME/21/5
Imaging materials. Processed silver-gelatin type black-and-white film. Specifications for stability will supersede BS ISO 18901:2002
CPW/42
BS ISO 19272
Alloyed steel. Determination of fifteen elements. Glow discharge optical emission spectrometry
ISE/18
Imaging materials. Processed safety photographic films. Storage practices will supersede BS ISO 18911:2000
CPW/42
BS ISO/IEC 19763:
Information technology. Metamodel framework for interoperability (MFI)
BS ISO/IEC 19763-5
Metamodel for process model registration
IST/40
BS ISO 17512-2
Test with collembolans (Folsomia candida)
EH/4
DD ISO/TS 19072:
Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections
BS ISO 20152:
Timber structures. Bond performance of adhesives
BS ISO 17736
Workplace atmospheres. Determination of isocyanate in air using a double-filter sampling device and analysis by liquid chromatography
EH/2/2
DD ISO/TS 19072-4
Pyrotechnic device and harness connector assembly. Type 2
AUE/16
BS ISO 20152-2
Additional requirements
B/518
BS ISO 21013-4
Pressure-relief accessories for cryogenic service
PVE/18
BS ISO 18192:
Implants for surgery. Wear of total intervertebral spinal disc prostheses
BS ISO 21500
Project management. Guide to project management
MS/2
49
DD ISO/TS 22939
Soil quality. Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in microwell plates
EH/4
BS ISO 24615
Language resource management. Syntactic annotation framework
TS/1
BS ISO 22008
Food irradiation. Good processing practices for the irradiation of foods intended for human consumption
AW/90
BS ISO 24617:
Language resource management. Semantic annotation framework (SemAF)
BS ISO 22068
Sintered metal injection moulded materials. Specifications
ISE/65
PD ISO/TR 23605
Technical product specification (TPS). Application guidance. International model for national implementation
TDW/4
BS ISO 24617-2
Dialogue acts
TS/1
BS ISO 22300
Societal security. Fundamentals and vocabulary
SSM/1
BS ISO 23611:
Soil quality. Sampling of soil invertebrates
BS ISO 24897
Steel. Determination of trace amount of oxigen. Infrared method with oxide layer subtraction technique
ISE/18
BS ISO 22448
Earth-moving. Theft deterrent systems. Classification and performance
B/513/1
BS ISO 23611-5
Sampling and extraction of soil macroinvertebrates
EH/4
BS ISO 25139
Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
EH/2/1
BS ISO 22477:
Geotechnical investigation and testing. Testing of geotechnical structures
BS ISO 23611-6
Guidance for the design of sampling programmes with soil invertebrates
EH/4
BS ISO 25178:
Geometrical product specifications (GPS). Surface texture. Areal
BS ISO 22477-9
Phicometer shearing test
B/526/3
BS ISO 24114
Instant coffee. Criteria for authenticity
AW/15
BS ISO 25178-7
Software measurement standards
TDW/4
BS ISO 22742
Packaging. Linear bar code and twodimensional symbols for product packaging
PKW/0
BS ISO 24115
Green coffee. Procedure for correlation of moisture meters. Routine method
AW/15
BS ISO 25178-603
Nominal characteristics of non-contact (phase shifting interferometric microscopy) instruments
TDW/4
DD ISO/TS 22745:
Industrial automation systems and integration. Open technical dictionaries and their application to master data
BS ISO 24253:
Crop protection equipment. Spray deposit tests of field crop sprayers
BS ISO 25178-604
Nominal characteristics of non-contact (coherence scanning interferometry) instruments
TDW/4
DD ISO/TS 22745-40
Master data representation
AMT/4
BS ISO 24253-1
Crop deposit measurements
AGE/15
BS ISO 25539:
Cardiovascular implants. Endovascular devices
DD ISO/TS 22745-50
Registration of open technical dictionaries
AMT/4
BS ISO 24253-2
Field deposit measurements
AGE/15
BS ISO 25539-3
Vena cava filters
CH/150/2
BS ISO 22846:
Personal equipment for protection against falls. Rope access systems
BS ISO 24614:
Word segmentation of written texts for monolingual and multi-lingual information processing
DD ISO/TS 25740:
Safety requirements for escalators and moving walks
BS ISO 22846-2
Code of practice
PH/5
BS ISO 24614-1
General principles and methods
TS/1
DD ISO/TS 25740-1
Global essential safety requirements (GESR)
MHE/4
BS ISO 24614-2
Word segmentation for Chinese, Japanese and Korean
TS/1
PD ISO/TR 25743
Lifts (elevators). Study into the use of lifts for evacuation during an emergency
MHE/4
50
BS ISO 25832:
Implants for surgery. Seamless tubes for surgical implants
BS ISO 27850
Tractors for agriculture and forestry. Overhead protection. Test procedures and performance requirements
AGE/6
BS ISO 30023
Textiles. Care labelling code using symbols for workwear to be industrially laundered
TCI/82
BS ISO 25832-1
Materials based on iron
CH/150/1
BS ISO 25964:
Information and documentation
BS ISO 28459
Earth-moving machinery. Requirements for use on the road
B/513/1
PD IEC/TR 60062:
Electrical installations in ships and mobile and fixed offshore units
BS ISO 25964-1
Thesauri and interoperability with other vocabularies
IDT/2/18
PD IEC/TR 60062-370
Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables
GEL/20/6
BS ISO 28581
Water quality. Determination of non-polar substances in water. Method using gas chromatography with mass spectrometric detection (GC-MS)
EH/3/2
BS ISO 26101
Acoustics. Test methods for the qualification of free-field environments
EH/1
DD IEC/PAS 60092:
Electrical installations in ships
JPEL/18
Surface chemical analysis. Standard data transfer format for scanning probe microscopy
CII/60
DD IEC/PAS 60092-510
Special features. High-voltage shore connection systems
JPEL/18
BS ISO 28703
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal shock resistance of porous ceramics
RPI/13
BS IEC 61881:
Railway applications. Rolling stock equipment. Capacitors for power electronics
BS ISO 26422
Petroleum and related products. Determination of shear stability of lubricating oils containing polymers. Four ball method using a tapered roller bearing
PTI/13
Aluminium electrolytic capacitors with non solid electrolyte and electric double layer capacitors
GEL/9/2
BS ISO 26900
Space systems. Orbit data messages
ACE/68
PD IEC/TR 62471:
Photobilogical safety of lamps and lamp systems
BS ISO 29201
Water quality. The variability of test results and the uncertainty of measurement of microbiological enumeration methods
EH/3/4
PD IEC/TR 62471-2
Guidance on manufacturing requirements relating to non-laser optical safety
EPL/76
PD ISO/TR 26999
Intelligent Transport Systems. Systems Architecture. Use of Process Orientated Methodology in ITS International Standards and Deliverables
EPL/278
PD ISO/TR 29263
Cereals and cereal products. Sampling studies
AW/4
BS IEC 62618
Radiation protection instrumentation. Spectroscopy-based alarming personal radiation devices (SPRD) for detection of illicit trafficking of radioactive material
NCE/2
BS ISO 27026
Space systems. Programme management. Project breakdown structures
ACE/68
DD ISO/TS 29741
Biological evaluation of medical devices. Development of tolerable intake values for Di(2-ethylhexyl)phthalate (DEHP)
CH/194
PD XXXX
Human resource aspects of business continuity management
BCM/1
DD ISO/TS 27265
Dried milk. Enumeration of the spores of thermophilic bacteria
AW/5
BS ISO 29821:
Condition monitoring and diagnostics of machines. Ultrasound
PD ISO GUIDE 31
Reference materials. Contents of certificates and labels
BS ISO 27307
Evaluation of adhesion/cohesion of plasma sprayed ceramic coatings by scratch testing
STI/41
BS ISO 29821-1
General guidelines
GME/21/7
Radio Frequency Identification (RFID) for stationary lead-acid cells and monoblocs. Guidance and requirements
PEL/21
51
09/30198074 DC
BS 8478 AMD1 Respiratory protective devices. Breathing gases for diving and hyperbaric applications
PH/4/7
09/30199560 DC 09/30193117 DC
BS 4311-2 Gauge blocks manufactured to imperial specification. Part 2. Accessories
TDW/4
BS 8243 Installation and configuration of intruder and hold-up alarm systems designed to generate confirmed alarm conditions. Code of practice
GW/1/2
09/30194300 DC
BS 4825-1 Stainless steel tubes and fittings for the food industry and other hygienic applications. Part 1. Specification for tubes
ISE/8
09/30194302 DC
BS 4825-2 Stainless steel tubes and fittings for the food industry and other hygienic applications. Part 2. Specification for bends and tees
ISE/8
09/30194304 DC
BS 4825-3 Stainless steel tubes and fittings for the food industry and other hygienic applications. Part 3. Specification for clamp type couplings
ISE/8
09/30194306 DC
BS 4825-4 Stainless steel tubes and fittings for the food industry and other hygienic applications. Part 4. Specification for threaded (IDF type) coupling
ISE/8
09/30167989 DC
BS 799-5 Oil burning equipment. Part 5. Carbon steel oil storage tanks. Specification
RHE/13
09/30194311 DC
BS 4825-5 Stainless steel tubes and fittings for the food industry and other hygienic applications. Part 5. Specification for recessed ring joint type couplings
ISE/8
09/30169955 DC
BS 8511 Code of practice for the installation of solid fuel fired heating and cooking appliances in recreational craft
RHE/28
09/19984091 DC
BS EN ISO 19906 Petroleum and natural gas industries. Arctic offshore structures 33.00 members, 66.00 non-members
B/525/12
09/30196102 DC
BS SP 10 and 11 AMD2 Specification for washers for aircraft purposes (primarily for facing purposes)
09/30174849 DC
BS 7985 Code of practice for the use of rope access methods for industrial purposes
PH/5
ACE/12
09/30150333 DC
BS ISO 23461 Space systems. Programme management. Nonconformance control system
ACE/68/-/5
09/30196104 DC
BS 8461 Football goals. Code of practice for their procurement, installation, maintenance, storage and inspection
SW/136
09/30186666 DC
BS 8522-1 Furniture removal activities. Commercial moving. Part 1. Service specification
SVS/7/2
09/30151431 DC
BS ISO 27048 Radiation protection. Dose assessment for the monitoring of workers for internal radiation exposure
NCE/2
09/30196106 DC
BS 8462 Goals for youth football, futsal, minisoccer and small-sided football. Specification
SW/136
09/30186668 DC
BS 8522-2 Furniture removal activities. Commercial moving. Part 2. Provision of the service
SVS/7/2
09/30196108 DC
BS SP 126 and 127 AMD2 Washers for unified hexagons for aircraft (primarily for facing purposes)
ACE/12
09/30163250 DC
BS ISO 15370 Ships and marine technology. Low-location lighting on passenger ships. Arrangement
SME/32/-/1
52
09/30163833 DC
BS ISO 29861 Document management applications. Quality control for scanning office documents in colour
IDT/1/1
09/30173908 DC
BS EN 13477-2 Non-destructive testing. Acoustic emission. Equipment characterization. Part 2. Verification of operating characteristics
WEE/46
09/30178331 DC
BS EN 1870-7 AMD1 Safety of woodworking machines. Circular sawing machines. Part 7. Single blade log sawing machines with integrated feed table and manual loading and/or unloading
MTE/23
09/30167386 DC
BS EN ISO 17573 Electronic fee collection. Systems architecture for vehicle related tolling
EPL/278
09/30174252 DC
BS EN 62562 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
EPL/46/2
09/30178334 DC
BS EN 1870-8 AMD1 Safety of woodworking machines. Circular sawing machines. Part 8. Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
MTE/23
09/30168253 DC
BS IEC 62533 Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material
NCE/2
09/30175723 DC
BS ISO 28560-1 Information and documentation. RFID in libraries. Part 1. General requirements and data elements
IDT/2/7
09/30175726 DC
BS ISO 28560-2 Information and documentation. RFID in libraries. Part 2. Encoding based on ISO/IEC 15962
IDT/2/7
09/30178366 DC
BS EN 848-3 AMD1 Safety of woodworking machines. One side moulding machines with rotating tools. Part 3. Numerically controlled (NC) boring and routing machines
MTE/23
09/30168526 DC
BS ISO/IEC 27033-1 Information technology. Security techniques. Network security. Part 1. Guidelines for network security
IST/33
09/30175729 DC
BS ISO 28560-3 Information and documentation. RFID in libraries. Part 3. Fixed length encoding
IDT/2/7
09/30168835 DC
BS EN ISO 7885 Dentistry. Sterile injection needles for single use
CH/106/4
09/30176076 DC
BS EN 280 AMD2 Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examination and tests
MHE/12
09/30178369 DC
BS EN 940 AMD1 Safety of woodworking machines. Combined woodworking machines
MTE/23
09/30168902 DC
BS ISO 27020 Dentistry. Brackets and tubes for use in orthodontics
CH/106/1
09/30177494 DC
BS EN 14238 AMD1 Cranes. Manually controlled load manipulating devices
MHE/3
09/30178372 DC
BS EN 1218-1 AMD1 Safety of woodworking machines. Tenoning machines. Part 1. Single end tenoning machines with sliding table
MTE/23
09/30171027 DC
BS ISO 11171 Hydraulic fluid power. Calibration of automatic particle counters for liquids
MCE/18/-/6
09/30178296 DC
BS EN 860 AMD1 Safety of woodworking machines. One side thickness planing machines
MTE/23
09/30178385 DC
BS EN 1218-5 AMD1 Safety of woodworking machines. Tenoning machines. Part 5. One side profiling machines with fixed table and feed rollers or feed chain
MTE/23
09/30178310 DC 09/30171916 DC
BS EN ISO 9239-1 Reaction to fire tests for floorings. Part 1. Determination of the burning behaviour using a radiant heat source
FSH/21
09/30178388 DC
BS EN 12750 AMD1 Safety of woodworking machines. Four-sided moulding machines
09/30171920 DC
BS EN ISO 11925-2 Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Part 2. Singleflame source test
FSH/21
09/30178322 DC
BS EN 1870-4 AMD1 Safety of woodworking machines. Circular sawing machines. Part 4. Multiblade rip sawing machines with manual loading and/or unloading
MTE/23
MTE/23
09/30178391 DC
BS EN 12779 AMD1 Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety related performances and safety requirements
MTE/23
09/30173298 DC
BS EN 81-21 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Part 21. New passenger and goods passenger lifts in existing buildings
MHE/4
09/30178325 DC
BS EN 1870-5 AMD1 Safety of woodworking machines. Circular sawing machines. Part 5. Circular sawbenches/up-cutting cross-cut sawing machines
MTE/23
09/30178783 DC
BS EN 62509 Performance and functioning of photovoltaic battery charge controllers
GEL/82
53
09/30181566 DC
BS ISO 29481-1 Building information models. Information delivery manual. Part 1. Methodology and format
B/555
09/30186636 DC
BS EN ISO 9241-210 Ergonomics of humansystem interaction. Part 210. Human-centred design for interactive systems
PH/9
09/30181658 DC 09/30179758 DC
BS EN 12044 AMD1 Footwear, leather and imitation leather goods manufacturing machines. Cutting and punching machines. Safety requirements
MCE/3/12
09/30186950 DC
BS EN 1782 AMD1 Tracheal tubes and connectors
CH/121/5
09/30182290 DC
BS EN 746-1 AMD1 Industrial thermoprocessing equipment. Part 1. Common safety requirements for industrial thermoprocessing equipment
MCE/3/8
09/30186956 DC
BS EN 12342 AMD1 Breathing tubes intended for use with anaesthetic apparatus and ventilators
CH/121/5
09/30179761 DC
BS EN 930 AMD2 Footwear, leather and imitation leather goods manufacturing machines. Roughing, scouring, polishing and trimming machines. Safety requirements
MCE/3/12
09/30182344 DC
BS EN 1953 AMD1 Atomising and spraying equipment for coating materials. Safety requirements
MCE/3/8
09/30179764 DC
BS EN 931 AMD2 Footwear manufacturing machines. Lasting machines. Safety requirements
MCE/3/12
09/30187082 DC
BS EN 60958-3 AMD1 Digital audio interface. Part 3. Consumer application
EPL/100
09/30182353 DC 09/30179767 DC
BS EN 12653 AMD2 Footwear, leather and imitation leather manufacturing machines. Nailing machines. Safety requirements
MCE/3/12
BS EN 12215 AMD1 Coating plants. Spray booths for application of organic liquid coating materials. Safety requirements
MCE/3/8
09/30188434 DC
BS EN 598 AMD1 Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods
PSE/10
09/30184056 DC
BS ISO 10845-1 Construction procurement. Part 1. Processes, methods and procedures 18.00 members, 36.00 non-members
CB/100
09/30179773 DC
BS EN 12387 AMD1 Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements
MCE/3/12
09/30188761 DC
BS ISO/IEC 29143 Information technology. Automatic identification and data capture techniques. Air interface specification for Mobile RFID interrogators
IST/34
09/30184131 DC
BS ISO 29081 Surface chemical analysis. Auger electron spectroscopy. Reporting of methods used for charge control and charge correction
CII/60
09/30179776 DC
BS EN 12203 AMD1 Footwear, leather and imitation leather goods manufacturing machines. Shoe and leather presses. Safety requirements
MCE/3/12
09/30189572 DC 09/30184534 DC
BS ISO/IEC 20000-1 Information technology. Service management. Part 1. Service management system requirements
IST/15/-/8
09/30180272 DC
BS EN 934-3 Admixtures for concrete, mortar and grout. Part 3. Admixtures for masonry mortar. Definitions, requirements, conformity, marking and labelling
B/517/3
BS EN 12864 AMD3 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
GSE/24
09/30185912 DC
BS EN 843-6 Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Part 6. Guidance for fractographic investigation
RPI/13
09/30189968 DC
BS EN 13544-1 AMD1 Respiratory therapy equipment. Part 1. Nebulizing systems and their components
CH/121
09/30181168 DC
BS EN 1047-2 Secure storage units. Classification and methods of test for resistance to fire. Part 2. Data rooms and data container
GW/2
09/30185951 DC
BS EN 15889 Fire-fighting hoses. Test methods
FSH/17/6
09/30190478 DC
BS EN 1147 Portable ladders for fire service use
FSH/17/5
09/30181283 DC
BS ISO/IEC 24727-6 Identification cards. Integrated circuit card programming interfaces. Part 6. Registration authority procedures for the authentication protocols for interoperability
IST/17
09/30186448 DC
BS EN 13941 Design and installation of preinsulated bonded pipe systems for district heating 18.00 members, 36.00 non-members
RHE/9
09/30190483 DC
BS EN 15767-3 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitors. Part 3. Foam devices
FSH/17/1
54
09/30190527 DC
BS ISO 26162 Systems to manage terminology, knowledge and content. Design, implementation and maintenance of terminology management systems
TS/1
09/30191982 DC
BS ISO 21748 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
SS/6
09/30192353 DC
BS EN 12470-3 AMD1 Clinical thermometers. Part 3. Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
LBI/36/3
09/30190935 DC
BS ISO 10872 Water quality. Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda)
EH/3/5
09/30192027 DC
BS EN 299 Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
GSE/27
09/30192356 DC
BS EN 12470-4 AMD1 Clinical thermometers. Part 4. Performance of electrical thermometers for continuous measurement
LBI/36/3
09/30190938 DC
BS ISO 7919-4 Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Part 4. Gas turbine sets with fluid-film bearings
GME/21/5
09/30192039 DC
BS EN 794-3 AMD2 Lung ventilators. Part 3. Particular requirements for emergency and transport ventilators
CH/121/5
09/30192362 DC
BS EN 15892 Railway applications. Noise emission. Measurement of noise inside drivers cabs
RAE/1
09/30190941 DC
BS ISO 10816-4 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 4. Gas turbine sets with fluid-film bearings
GME/21/5
09/30192042 DC
BS EN 13544-2 AMD1 Respiratory therapy equipment. Part 2. Tubing and connectors
CH/121/5
09/30192433 DC
BS ISO 21581 Timber structures. Static and cyclic lateral load test method for shear walls
B/518
09/30192729 DC 09/30191126 DC
BS EN 62132-8 Integrated circuits. Measurement of electromagnetic immunity. Part 8. Measurement of radiated immunity. IC Stripline method
EPL/47
09/30192045 DC
BS EN 13544-3 AMD1 Respiratory therapy equipment. Part 3. Air entrainment devices
CH/121/5
BS EN 15643-2 Sustainability of construction works. Assessment of buildings. Part 2. Framework for the assessment of environmental performance
B/558
09/30192733 DC 09/30192126 DC
BS EN 15643-1 Sustainability of construction works. Assessment of buildings. Part 1. General framework
B/558
09/30191130 DC
BS EN 61967-8 Integrated circuits. Measurement of electromagnetic emissions. Part 8. Measurement of radiated emissions. IC Stripline method
EPL/47
BS ISO/IEC 15444-3 AMD1 Information technology. Part 3. JPEG 2000 image coding system. Motion JPEG 2000
IST/37
09/30192761 DC
BS EN 115-2 Safety of escalators and moving walks. Part 2. Rules for the improvement of safety of existing escalators and moving walks
MHE/4
09/30192128 DC
BS ISO/IEC 15444-9 AMD4 Information technology. Part 9. JPEG 2000 image coding system. Interactivity tools, APIs and protocols
IST/37
09/30192797 DC
BS ISO 27875 Space systems. Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages
ACE/68/-/3
09/30191459 DC
BS ISO 16063-41 Methods for the calibration of vibration and shock transducers. Part 41. Calibration of laser vibrometers
GME/21/2
09/30192332 DC
BS EN 31 Wash basins. Connecting dimensions
B/503
09/30192810 DC 09/30191612 DC
BS ISO 16992 Passenger car tyres. Spare unit substitutive equipment (SUSE)
AUE/4
09/30192335 DC
BS EN 33 WC pans and WC suites. Connecting dimensions
B/503
BS ISO 10816-2 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 2. Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
GME/21/5
09/30191937 DC
BS ISO 20152-1 Timber structures. Bond performance of adhesives. Part 1. Basic requirements
B/518
09/30192350 DC
BS EN 12470-2 AMD1 Clinical thermometers. Part 2. Phase change type (dot matrix) thermometers
LBI/36/3
09/30192939 DC
BS EN 60811-100 Electric and optical fibre cables. Test methods for non-metallic materials. Part 100. General
GEL/20/17
55
09/30192986 DC
BS EN 60811-406 Electric and optical fibre cables. Test methods for non-metallic materials. Part 406. Environmental tests. Resistance to environmental stress cracking of polyethylene and polypropylene compounds
GEL/20/17
09/30193023 DC
BS EN 60811-503 Electric and optical fibre cables. Test methods for non-metallic materials. Part 503. Mechanical tests. Shrinkage test for sheaths
GEL/20/17
09/30192947 DC
BS EN 60811-202 Electric and optical fibre cables. Test methods for non-metallic materials. Part 202. General tests. Measurement of thickness of non-metallic sheath
GEL/20/17
09/30192990 DC
BS EN 60811-407 Electric and optical fibre cables. Test methods for non-metallic materials. Part 407. Environmental tests. Measurement of mass increase of polyethylene and polypropylene compounds
GEL/20/17
09/30193027 DC
BS EN 60811-504 Electric and optical fibre cables. Test methods for non-metallic materials. Part 504. Mechanical tests. Bending tests at low temperature for insulation and sheaths
GEL/20/17
09/30192954 DC
BS EN 60811-203 Electric and optical fibre cables. Test methods for non-metallic materials. Part 203. General tests. Measurement of overall dimensions
GEL/20/17
09/30193031 DC 09/30192994 DC
BS EN 60811-408 Electric and optical fibre cables. Test methods for non-metallic materials. Part 408. Environmental tests. Long term stability test of polyethylene and polypropylene compounds
GEL/20/17
BS EN 60811-505 Electric and optical fibre cables. Test methods for non-metallic materials. Part 505. Mechanical tests. Elongation at low temperature for insulations and sheaths
GEL/20/17
09/30192958 DC
BS EN 60811-301 Electric and optical fibre cables. Test methods for non-metallic materials. Part 301. Electrical tests. Measurement of the permittivity at 23C of filling compounds
GEL/20/17
09/30193035 DC 09/30192998 DC
BS EN 60811-409 Electric and optical fibre cables. Test methods for non-metallic materials. Part 409. Environmental tests. Loss of mass test for thermoplastic insulations and sheaths
GEL/20/17
BS EN 60811-506 Electric and optical fibre cables. Test methods for non-metallic materials. Part 506. Mechanical tests. Impact test at low temperature for insulations and sheaths
GEL/20/17
09/30192962 DC
BS EN 60811-302 Electric and optical fibre cables. Test methods for non-metallic materials. Part 302. Electrical tests. Measurement of the D.C. resistivity at 23C and 100C of filling compounds
GEL/20/17
09/30193039 DC 09/30193002 DC
BS EN 60811-410 Electric and optical fibre cables. Test methods for non-metallic materials. Part 410. Environmental tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
GEL/20/17
BS EN 60811-507 Electric and optical fibre cables. Test methods for non-metallic materials. Part 507. Mechanical tests. Hot set test for crosslinked materials
GEL/20/17
09/30192966 DC
BS EN 60811-401 Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Environmental tests. Thermal ageing methods. Ageing in an air oven
GEL/20/17
09/30193047 DC 09/30193006 DC
BS EN 60811-411 Electric and optical fibre cables. Test methods for non-metallic materials. Part 411. Environmental tests. Low temperature brittleness of filling compounds
GEL/20/17
09/30192970 DC
BS EN 60811-402 Electric and optical fibre cables. Test methods for non-metallic materials. Part 402. Environmental tests. Water absorption tests
GEL/20/17
BS EN 60811-508 Electric and optical fibre cables. Test methods for non-metallic materials. Part 508. Mechanical tests. Pressure test at high temperature for insulation and sheaths
GEL/20/17
09/30193051 DC 09/30193010 DC
BS EN 60811-412 Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Environmental tests. Thermal ageing methods. Ageing in an air bomb
GEL/20/17
09/30192974 DC
BS EN 60811-403 Electric and optical fibre cables. Test methods for non-metallic materials. Part 403. Environmental tests. Ozone resistance test on elastomeric compounds
GEL/20/17
BS EN 60811-509 Electric and optical fibre cables. Test methods for non-metallic materials. Part 509. Mechanical tests. Test for resistance of insulations and sheaths to cracking
GEL/20/17
09/30193055 DC 09/30192978 DC
BS EN 60811-404 Electric and optical fibre cables. Test methods for non-metallic materials. Part 404. Environmental tests. Mineral oil immersion tests for sheaths made with elastomeric compounds
GEL/20/17
09/30193015 DC
BS EN 60811-501 Electric and optical fibre cables. Test methods for non-metallic materials. Part 501. Mechanical tests. Tests for determining the mechanical properties of insulating and sheathing compounds
GEL/20/17
BS EN 60811-510 Electric and optical fibre cables. Test methods for non-metallic materials. Part 510. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after thermal ageing in air
GEL/20/17
09/30193059 DC 09/30192982 DC
BS EN 60811-405 Electric and optical fibre cables. Test methods for non-metallic materials. Part 405. Environmental tests. Thermal stability test for PVC insulations and PVC sheaths
GEL/20/17
09/30193019 DC
BS EN 60811-502 Electric and optical fibre cables. Test methods for non-metallic materials. Part 502. Mechanical tests. Shrinkage test for insulations
GEL/20/17
BS EN 60811-511 Electric and optical fibre cables. Test methods for non-metallic materials. Part 511. Mechanical tests. Measurement of the melt flow index of polyethylene and polypropylene compounds
GEL/20/17
56
09/30193063 DC
BS EN 60811-512 Electric and optical fibre cables. Test methods for non-metallic materials. Part 512. Mechanical tests. Tensile strength and elongation at break after conditioning at elevated temperature. Methods specific to polyethylene and polypropylene compounds
GEL/20/17
09/30193349 DC
BS ISO 11476 Paper and board. Determination of CIE-whiteness, C/2 (indoor illumination conditions)
PAI/11
09/30194061 DC
BS ISO 8721 Road vehicles. Measurement techniques in impact tests. Optical instrumentation
AUE/7
09/30193067 DC
BS EN 60811-513 Electric and optical fibre cables. Test methods for non-metallic materials. Part 513. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after conditioning
GEL/20/17
09/30193379 DC
BS ISO 813 Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90 peel method
PRI/22
09/30194359 DC
BS EN 60034-18-34 Rotating electrical machines. Part 18-34. Functional evaluation of insulation systems. Test procedures for formwound windings. Evaluation of thermomechanical endurance of insulation systems
PEL/2
09/30193071 DC
BS EN 60811-601 Electric and optical fibre cables. Test methods for non-metallic materials. Part 601. Physical tests. Measurement of the drop-point of filling compounds
GEL/20/17
09/30193698 DC
BS EN 14080 Timber structures. Glued laminated timber and glued laminated solid timber. Requirements
B/518
09/30194936 DC
BS EN ISO 28460 Petroleum and natural gas industries. Installation and equipment for liquefied natural gas. Ship-to-shore interface and port operations
PSE/17/-/7
09/30193075 DC
BS EN 60811-602 Electric and optical fibre cables. Test methods for non-metallic materials. Part 602. Physical tests. Separation of oil in filling compounds
GEL/20/17
09/30193701 DC
BS EN 15898 Conservation of cultural property. Main general terms and definitions concerning conservation of cultural property
B/560
09/30194939 DC
BS ISO 12640-4 Graphic technology. Prepress digital data exchange. Part 4. Wide gamut display-referred standard colour image data [Adobe RGB (1998)/SCID]
PAI/43
09/30193875 DC 09/30193079 DC
BS EN 60811-603 Electric and optical fibre cables. Test methods for non-metallic materials. Part 603. Physical tests. Measurement of total acid number of filling compounds
GEL/20/17
BS EN ISO 11953 Dentistry. The performance of hand torque instruments for the clinical tightening of screw-retained joints in endosseous dental implant systems
CH/106/8
09/30194943 DC
BS EN ISO 225 Fasteners. Bolts, screws, studs and nuts. Symbols and designations of dimensions
FME/9/2
09/30193885 DC 09/30193083 DC
BS EN 60811-604 Electric and optical fibre cables. Test methods for non-metallic materials. Part 604. Physical tests. Measurement of absence of corrosive components in filling compounds
GEL/20/17
BS EN 861 AMD1 Safety of woodworking machines. Surface planing and thicknessing machines
MTE/23
09/30195262 DC
BS ISO 12439 Mixing water for concrete
B/517
09/30194017 DC
BS EN 480-10 Admixtures for concrete, mortar and grout. Test methods. Part 10. Determination of water soluble chloride content
B/517/3
09/30195609 DC
BS EN 15890 Foodstuffs. Determination of patulin in fruit juice and fruit based puree for young children. HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection
AW/-/3
09/30193087 DC
BS EN 60811-605 Electric and optical fibre cables. Test methods for non-metallic materials. Part 605. Physical tests. Measurement of carbon black and/or mineral filler in polyethylene compounds
GEL/20/17
09/30194024 DC
BS EN 15912 Durability of reaction to fire performances. Classes of fire retardant treated wood-based product in interior and exterior end use applications
B/543
09/30196632 DC
BS EN 4325 Aerospace series. Steel FE-WM 3504 (X4CrNiMo16-5-1). Air melted. Filller metal for welding
ACE/61/-/15
09/30193091 DC
BS EN 60811-606 Electric and optical fibre cables. Test methods for non-metallic materials. Part 606. Physical tests. Methods for determining the density
GEL/20/17
09/30194058 DC 09/30193095 DC
BS EN 60811-607 Electric and optical fibre cables. Test methods for non-metallic materials. Part 607. Physical test. Test for the assessment of carbon black dispersion in Polyethylene and Polypropylene
GEL/20/17
BS ISO 27955 Road vehicles. Securing of cargo in passenger cars, station wagons and multipurpose vehicles. Requirements and test methods
AUE/7
09/30196635 DC
BS EN 60092-510 Electrical installations in ships. Part 510. Special features. High Voltage Shore Connection Systems (HVSC-Systems)
JPEL/18
57
09/30197921 DC
BS EN 62561-4 Requirements for Lightning Protection System Components (LPSC). Part 4. Requirements for fasteners
GEL/81
09/30198263 DC
BS EN 61837-1 Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Part 1. Plastic moulded enclosure outlines
EPL/49
09/30197925 DC 09/30196780 DC
BS ISO 12493 Rubber, vulcanized. Determination of stress in tension on heating
PRI/22
BS EN 4641-301 Aerospace series. Cables, optical 125m diameter cladding. Part 301. Tight structure 50-125m GI fibre nominal 1.8 mm Outside Diameter. Product Standard
ACE/6
09/30198396 DC
BS EN 61784-2 Industrial communication networks. Profiles. Part 2. Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 18.00 members, 36.00 non-members
AMT/7
09/30197413 DC
BS EN 50411-3-2 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Part 3-2. Singlemode mechanical fibre splice
GEL/86/2
09/30197946 DC
BS EN ISO 8536-3 Infusion equipment for medical use. Part 3. Aluminium caps for infusion bottles
CH/212
09/30197559 DC
BS EN 60794-3-11 Optical fibre cables. Part 311. Outdoor cables. Product specification for duct and directly buried single-mode optical fibre telecommunication cables
GEL/86/1
09/30198404 DC
BS EN 61784-1 Industrial communication networks. Profiles. Part 1. Fieldbus profiles 33.00 members, 66.00 non-members
AMT/7
09/30198139 DC
BS EN 61400-1 AMD1 Wind turbines. Part 1. Design requirements
PEL/88
09/30198417 DC 09/30197676 DC
BS IEC 61810-2-1 Electromechanical elementary relays. Part 2-1. Reliability. Procedure for the verification of B10 values
EPL/94
09/30198228 DC
BS EN 15891 Foodstuffs. Determination of deoxynivalenol in cereals, cereal products and cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and UV detection
AW/-/3
09/30198606 DC 09/30197751 DC
BS EN 4678 Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments
ACE/61/-/2
09/30198231 DC
BS EN 62561-7 Requirements for Lightning Protection System Components (LPSC). Part 7. Requirements for earthing enhancing compounds
GEL/81
BS EN 60332-3-10 Tests on electric and optical fibre cables under fire conditions. Part 3-10. Test for vertical flame spread of verticallymounted bunched wires or cables. Apparatus
GEL/20/18
09/30198609 DC
BS EN 60332-3-21 Tests on electric cables under fire conditions. Part 3-21. Test for vertical flame spread of vertically-mounted bunched wires or cables. Category A F/R
GEL/20/18
09/30197816 DC
BS ISO 10816-1 AMD1 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 1. General guidelines
GME/21/5
09/30198252 DC
BS EN 12470-1 AMD1 Clinical thermometers. Part 1. Metallic liquid-in-glass thermometers with maximum device
LBI/36/3
09/30198613 DC
BS EN 60332-3-22 Tests on electric and optical fibre cables under fire conditions. Part 3-22. Test for vertical flame spread of verticallymounted bunched wires or cables. Category A
GEL/20/18
09/30197819 DC
BS ISO 2631-1 AMD1 Mechanical vibration and shock. Evaluation of human exposure to wholebody vibration. Part 1. General requirements
GME/21/6
09/30198254 DC
BS EN 60368-3 Piezoelectric filters of assessed quality. Part 3. Standard outlines and lead connections
EPL/49
09/30198617 DC
BS EN 60332-3-23 Tests on electric and optical fibre cables under fire conditions. Part 3-23. Test for vertical flame spread of verticallymounted bunched wires or cables. Category B
GEL/20/18
09/30197862 DC
BS EN 62616 Maritime navigation and radiocommunication equipment and systems. Bridge navigational watch alarm system (BNWAS). Performance requirements, methods of testing and required test results
EPL/80
09/30198258 DC
BS EN 60679-3 Quartz crystal controlled oscillators of assessed quality. Part 3. Standard outlines and lead connections
EPL/49
09/30198621 DC
BS EN 60332-3-24 Tests on electric and optical fibre cables under fire conditions. Part 3-24. Test for vertical flame spread of verticallymounted bunched wires or cables. Category C
GEL/20/18
58
09/30198647 DC
BS EN 60335-2-4 AMD Household and similar electrical appliances. Safety. Part 2-4. Particular requirements for spin extractors
CPL/61/14
09/30199064 DC
BS EN 62364 Hydraulic machines. Guide for dealing with abrasive erosion in water
MCE/15
09/30199378 DC
BS EN 60061 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps. Amendment 43. Part 2. Lampholders. Amendment 40. Part 3. Gauges. Amendment 41
CPL/34/2
09/30198650 DC
BS EN 62329-3-102 Heat shrinkable moulded shapes. Part 3. Specification requirements for shape dimensions, material requirements and compatibility performance. Sheet 102. Heatshinkable elastomeric moulded shapes, semirigid, material requirements and system performance
GEL/15/5
09/30199080 DC
BS EN 4023 Aerospace series. Pipe coupling 830 in titanium alloy. Elbows 45
ACE/69
09/30199438 DC
BS EN 60112 AMD1 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
GEL/112
09/30199086 DC 09/30198654 DC
BS EN 60335-2-7 AMD Household and similar electrical appliances. Safety. Part 2-7. Particular requirements for washing machines
CPL/61/14
BS EN ISO 105-C08 Textiles. Tests for colour fastness. Part C08. Colour fastness to domestic and commercial laundering using a nonphosphate reference detergent incorporating a low temperature bleach activator
TCI/81
09/30198664 DC
BS ISO/IEC 15421 Information technology. Automatic identification and data capture techniques. Bar code master test specifications
IST/34
09/30198671 DC
BS EN 60332-3-25 Tests on electric and optical fibre cables under fire conditions. Part 3-25. Test for vertical flame spread of verticallymounted bunched wires or cables. Category D
GEL/20/18
09/30199116 DC
BS EN 4184 Aerospace series. Pipe coupling 830 in titanium alloy. Elbows 45, welded ends, double
ACE/12
Comments can be sent by email or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000
EN 908:1999/Amendment 1
Agricultural and forestry machinery. Reel machines for irrigation. Safety
09/30198786 DC
BS EN 6049-008 Aerospace series. Electrical cables, installation. Protection sleeve in metaaramid fibres. Part 008. Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, Flexible post installation operating temperature from 55C to 200C. Product standard
ACE/6
09/30199215 DC
BS EN 60793-1-31 Optical fibres. Part 1-31. Measurement methods and test procedures. Tensile strength
GEL/86/1
EN 909:1998/Amendment 1
Agricultural and forestry machinery. Centre pivot and moving lateral types irrigation machines. Safety The above have been circulated under UAP procedure. Copies of the drafts are available on request from the contact point (below). Contact: Committee Service Centre Email: csc@bsigroup.com
AGE/30
09/30198956 DC
BS EN 2997-016 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65C to 175C continuous, 200C continuous, 260C peak. Part 016. Plug with integrated accessory. Product standard
ACE/6
09/30199219 DC
BS EN 60793-1-32 Optical fibres. Part 1-32. Measurement methods and test procedures. Coating strippability
GEL/86/1
ISO/DIS 2076
Textiles. Man-made fibres. Generic names This document has been circulated for the Draft International Standard Vote. Please return any comments to the Programme Manager (below) by 13 March, 2009. Contact: Eddie Levio Email: eddie.levio@bsigroup.com
TCI/24
09/30198997 DC
BS EN 2997-015 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65C to 175C continuous, 200C continuous, 260C peak. Part 015. Jam-nut mounted receptacle with integrated accessory. Product standard
ACE/6
09/30199223 DC
BS EN 60876-1 Fibre optic interconnecting devices and passive components. Fibre optic spatial switches. Part 1. Generic specification
GEL/86/2
09/30199020 DC
BS EN 2997-014 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65C to 175C continuous, 200C continuous, 260C peak. Part 014. Square flange receptacle with integrated accessory. Product standard
ACE/6
Fibre-cement slates and fittings. Product specification and test methods A copy of the above document is available from the contact point (below). Contact: Committee Service Centre Email: csc@bsigroup.com
B/3
59
prEN 4132
Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235C A copy of the above document is available from the contact point (below). Contact: Committee Service Centre Email: csc@bsigroup.com
ACE/12
EN 334:2005+A1:2009
Gas pressure regulators for inlet pressures up to 100 bar
GSE/32
EN 419:
Non-domestic gas-fired overhead luminous radiant heaters
EN 419-1:2009
Safety
prEN 12041:2000/Amendment 1
Food processing machinery. Moulders. Safety and hygiene requirements This standard has been revised to take account of the comments. It has now been submitted for combined enquiry/formal vote under the CEN Unique Acceptance Procedure. The closing date for comments is 15 May, 2009. A copy of the draft is available on request under document reference MCE/3/5 Contact: Anita Attra Email: anita.attra@bsigroup.com
MCE/3/5
GSE/20
EN 902:2009
Chemicals used for treatment of water intended for human consumption. Hydrogen peroxide
CII/59
EN 938:2009
Chemicals used for treatment of water intended for human consumption. Sodium chlorite
CII/59
Chemicals used for treatment of water intended for human consumption. Hydrochloric acid
CII/59
EN 1143:
Secure storage units. Requirements, classification and methods of test for resistance to burglary
EN 1143-1:2005+A1:2009
Safes, ATM safes, strongroom doors and strongrooms
GW/2
EN 1594:2009
Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements
prEN 1974:1998/Amendment 1
Food processing machinery. Slicing machines. Safety and hygiene requirements This standard has been revised to accomodate comments as a result of the new Safety of Machinery Directive. It has now been submitted for combined enquiry/formal vote under the CEN Unique Acceptance Procedure. The closing date for comments is 22 May, 2009. A copy of the draft is available on request under document reference MCE/3/5 Contact: Anita Attra Email: anita.attra@bsigroup.com
MCE/3/5
GSE/33
EN 1870:
Safety of woodworking machines. Circular sawing machines
EN 1870-1:2007+A1:2009
Circular saw benches (with and without sliding table), dimension saws and building site saws
MTE/23
EN 10324:
Steel wire and wire products. Hose reinforcement wire CORRIGENDUM 1:October 2008
to EN 10324:2004
e-mail your order order@bsigroup.com
EN 253:2009
District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
RHE/9
ISE/26
EN 12245:2009
Transportable gas cylinders. Fully wrapped composite cylinders
PVE/3/3
60
EN 12566:
Small wastewater treatment systems for up to 50 PT
EN 13463:
Non-electrical equipment for use in potentially explosive atmospheres
EN 14509:
Self-supporting double skin metal faced insulating panels. Factory made products. Specifications CORRIGENDUM 1:November 2008
EN 12566-3:2005+A1:2009
Packaged and/or site assembled domestic wastewater treatment plants
B/505
EN 13463-1:2009
Basic method and requirements
FSH/23
to EN 14509:2006
B/542/12
EN 12671:2009
Chemicals used for treatment of water intended for human consumption. Chlorine dioxide generated in situ
CII/59
EN 13476:
Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE)
EN 14878:
Textiles. Burning behaviour of childrens nightwear. Specification CORRIGENDUM 1:January 2009
to EN 14878:2007
TCI/66/-/8
EN 12876:2009
Chemicals used for treatment of water intended for human consumption. Oxygen
CII/59
EN 13476-3:2007+A1:2009
Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
PRI/88/1
EN 14917:2009
Metal bellows expansion joints for pressure applications
PSE/12
EN 13120:2009
Internal blinds. Performance requirements including safety
B/538/3
EN 13480:
Metallic industrial piping
EN 15305:
Non-destructive testing. Test method for residual stress analysis by X-ray diffraction CORRIGENDUM 1:January 2009
EN 13480-3:2002+A3:2009 EN 13218:
Machine tools. Safety. Stationary grinding machines AMENDMENT 1:CORRIGENDUM 1:October 2008 Design and calculation
PVE/10
to EN 15305:2008
WEE/46
EN 15475:2009 EN 13524:2003+A1:2009
Highway maintenance machines. Safety requirements
B/513
to EN 13218:2002
MTE/1
EN 13218:2002+A1:2008
Machine tools. Safety. Stationary grinding machines
MTE/1
EN 15476:2009 EN 13573:2009
Inland navigation vessels. Anchoring, coupling, towing, hauling and mooring systems
SME/32/-/7
EN 13384:
Chimneys. Thermal and fluid dynamic calculation methods
EN 13598:
Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)
EN 15477:2009
Fertilizers. Determination of the water-soluble potassium content
CII/37
EN 13384-2:2003+A1:2009
Chimneys serving more than one heating appliance
B/506
EN 15478:2009 EN 13598-2:2009
Specifications for manholes and inspection chambers in traffic areas and deep underground installations
PRI/88/1
EN 13445:
Unfired pressure vessels
EN 15479:2009
Fertilizers. Spectrophotometric determination of biuret in urea
CII/37
EN 13445-2:
Materials AMENDMENT 3:January 2009
EN 13942:2009
Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves
PSE/17
to EN 13445-2:2002
PVE/1
EN 15558:2009
Fertilizers. Determination of nitric and ammoniacal nitrogen according to Ulsch
CII/37
EN 13445-2:
Materials AMENDMENT 5:January 2009
EN 14444:
Structural adhesives. Qualitative assessment of durability of bonded assemblies. Wedge rupture test CORRIGENDUM 1:October 2008
to EN 13445-2:2002
PVE/1
EN 15559:2009
Fertilizers. Determination of nitric and ammoniacal nitrogen according to Arnd
CII/37
to EN 14444:2005
PRI/52
EN 13445-4:
Fabrication AMENDMENT 3:January 2009
EN 14504:2009
Inland navigation vessels. Floating landing stages. Requirements, tests
SME/32/-/7
EN 15560:2009
Fertilizers. Determination of total nitrogen in calcium cyanamide nitrate free
CII/37
to EN 13445-4:2002
PVE/1
61
CEN/TR 15276:
Fixed firefighting systems. Condensed aerosol extinguishing systems
CEN/TR 15276-1:2009
Requirements and test methods for components
FSH/18/6
EN 15562:2009
Fertilizers. Determination of cyanamide nitrogen
CII/37
Lifting and load-bearing equipment for stages and other production areas within the entertainment industry
General requirements (excluding aluminium and steel trusses and towers) no current standard is superseded 90.00 members, 180.00 non-members
CEN/TR 15367:
Petroleum products. Guide for good housekeeping
EN 15587:
Cereals and cereal products. Determination of Besatz in wheat (Triticumaestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.) CORRIGENDUM 1:January 2009
CWA 15902-2:2008
Specifications for design, manufacture and for use of aluminium and steel trusses and towers no current standard is superseded 69.00 members, 138.00 non-members
CEN/TR 15367-3:2009
Prevention of cross contamination
PTI/2
to EN 15587:2008
AW/4
EN 15604:2009
Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
CII/37
EN 15632:
District heating pipes. Pre-insulated flexible pipe systems
EN 15632-1:2009
Classification, general requirements and test methods
RHE/9
CEN REPORTS
CEN/TR 12101:
Smoke and heat control systems
EN 15632-4:2009
Bonded system with metal service pipes; requirements and test methods
RHE/9
CEN/TS 15705:2009
Fertilizers. Determination of urea condensates using high-performance liquid chromotography (HPLC). Isobutylidenediurea and crotonylidenediurea (method A) and methylenurea oligomers (method B)
CII/37
EN 15648:2009
Thermal spraying. Component related procedure qualification
STI/40
CEN/TS 45545-1:2009
General
FSH/19
EN 15698:
District heating pipes. Preinsulated bonded twin pipe systems for directly buried hot water networks
CEN/TR 13931:2009
Rotodynamic pumps. Forces and moments on flanges. Centrifugal, mixed flow and axial flow horizontal and vertical shafts pumps
MCE/6
CEN/TS 45545-2:2009
Requirements for fire behaviour of materials and components
FSH/19
EN 15698-1:2009
Twin pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
RHE/9
CEN/TR 13932:2009
Rotodynamic pumps. Recommendations for fitting of inlet and outlet on piping
MCE/6
CEN/TS 45545-3:2009
Fire resistance requirements for fire barriers
FSH/19
62
CEN/TS 45545-4:2009
Fire safety requirements of railway rolling stock design
FSH/19
EN 50483-2:2009
Tension and suspension clamps for self supporting system
GEL/20/11
EN 50483-3:2009
Tension and suspension clamps for neutral messenger system
GEL/20/11
CPL/61/3
CEN/TS 45545-7:2009
Fire safety requirements for flammable liquid and flammable gas installations
FSH/19
EN 50483-4:2009
Connectors
GEL/20/11
to EN 60335-2-96:2002
CPL/61/07
CENELEC PUBLICATIONS
EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.
EN 50483-5:2009
Electrical ageing test
GEL/20/11
EN 60404:
Magnetic materials
EN 60519: EN 60286:
Packaging of components for automatic handling Safety in electroheat installations
EN 50164:
Lightning Protection Components (LPC)
EN 50164-3:
Requirements for isolating spark gaps AMENDMENT 1:January 2009
to EN 50164-3:2006
GEL/81
EN 50164-5:2009
Requirements for earth electrode inspection housings and earth electrode seals
GEL/81
EN 50164-6:2009
Requirements for lightning strike counters
GEL/81
EN 61000:
Electromagnetic compatibility (EMC)
EN 50194:
Electrical apparatus for the detection of combustible gases in domestic premises
EN 50194-1:2009
Test methods and performance requirements
GEL/31/19
EN 60335:
Household and similar electrical appliances. Safety
EN 61347:
Lamp controlgear
EN 50483:
Test requirements for low voltage aerial bundled cable accessories
EN 50483-1:2009
Generalities
GEL/20/11
to EN 60335-2-17:2002
CPL/61/07
to EN 61347-2-10:2001
CPL/34/3
63
IEC PUBLICATIONS
It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2)
IEC 60794:
Optical fibre cables
IEC 60794-3:
Outdoor cables
IEC 60794-3-10:2009
(Edition 2) Family specification for duct, directly buried and lashed aerial optical telecommunication cables 108.48 members, 113.00 non-members
GEL/86/1
EN 61883:
Consumer audio/video equipment. Digital interface
IEC 60068:
Environmental testing
IEC 60794-3-20:2009
(Edition 2)
IEC 60068-2-14:2009
(Edition 6) Tests. Test N. Change of temperature 83.52 members, 87.00 non-members
GEL/104
Family specification for self-supporting aerial telecommunication cables 91.20 members, 95.00 non-members
GEL/86/1
EN 62024:
High frequency inductive components. Electrical characteristics and measuring methods
IEC 60851:
Winding wires. Test methods
(Edition 2) Tests. Test Z/AD. Composite temperature/humidity cyclic test 57.60 members, 60.00 non-members
GEL/104
IEC 60851-3:2009
(Edition 3) Mechanical properties 151.68 members, 158.00 non-members
GEL/55
IEC 60115:
Fixed resistors for use in electronic equipment
IEC 60947:
Low-voltage switchgear and controlgear
to IEC 60947-2:2006
108.48 members, 113.00 non-members
PEL/17/2
IEC 60966:
Radio frequency and coaxial cable assemblies
IEC 60204:
IEC 60966-2-3:2009
(Edition 3) Detail specification for flexible coaxial cable assemblies. Frequency range 0 MHz to 1000 MHz, IEC 61169-8 connectors 26.88 members, 28.00 non-members
EPL/46
IEC 60204-1:
General requirements AMENDMENT 1:November 2008
IEC 60966-2-4:2009
(Edition 3) Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 3000 MHz, IEC 61169-2 connectors 30.72 members, 32.00 non-members
EPL/46
IEC 60317:
Specifications for particular types of winding wires
CLC/TS 60034:
Rotating electrical machines
IEC 60966-2-5:2009
(Edition 3) Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 1000 MHz, IEC 61169-2 connectors 30.72 members, 32.00 non-members
EPL/46
Polyester enamelled rectangular copper wire, class 155 AMENDMENT 2:January 2009
to IEC 60317-16:1990
17.28 members, 18.00 non-members
GEL/55
64
IEC 61300-3-7:2009
(Edition 2) Wavelength dependence of attenuation and return loss of single mode components 108.48 members, 113.00 non-members
GEL/86/2
IEC 61557-11:2009
Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems 91.20 members, 95.00 non-members
PEL/85
IEC 61300-3-34:2009
(Edition 3) Attenuation of random mated connectors 52.80 members, 55.00 non-members
GEL/86/2
IEC 61755-3-1:
Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule single mode fibre CORRIGENDUM 1:January 2009
to IEC 61755-3-1:2006
GEL/86/2
IEC 61755-3-2:
Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres CORRIGENDUM 1:January 2009
IEC 61073-1:2009
(Edition 4) Generic specification 83.52 members, 87.00 non-members
GEL/86/2
IEC 61314:
Fibre optic interconnecting devices and passive components. Fibre optic fan-outs
to IEC 61755-3-2:2006
GEL/31
IEC 61314-1:2009
(Edition 3) Generic specification 83.52 members, 87.00 non-members
GEL/86/2
IEC 61755-3-7:2009
Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre 45.12 members, 47.00 non-members
GEL/86/2
IEC 61196:
Coaxial communication cables
IEC 61196-6-1:2009
Blank detail specification for CATV drop cables 40.32 members, 42.00 non-members
EPL/46/1
IEC 61439:
Low-voltage switchgear and controlgear assemblies
IEC 61755-3-8:2009
Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre 45.12 members, 47.00 non-members
GEL/86/2
IEC 61196-6:2009
Sectional specification for CATV drop cables 48.00 members, 50.00 non-members
EPL/46/1
IEC 61439-1:2009
General rules 230.40 members, 240.00 non-members
PEL/17/3
IEC 61300:
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
IEC 61439-2:2009
Power switchgear and controlgear assemblies 91.20 members, 95.00 non-members
PEL/17/3
IEC 61914:2009
Cable cleats for electrical installations 108.48 members, 113.00 non-members
PEL/213
IEC 61300-2-2:2009
(Edition 3) Tests. Mating durability 40.32 members, 42.00 non-members
GEL/86/2
IEC 61534:
Powertrack systems
IEC 62007:
Semiconductor optoelectronic devices for fibre optic system applications
IEC 61534-22:2009
Particular requirements for powertrack systems intended for on floor or under floor installation 91.20 members, 95.00 non-members
PEL/213
IEC 62007-2:2009
(Edition 2) Semiconductor optoelectronic devices for fibre optic system applications Part 2: Measuring methods 134.40 members, 140.00 non-members
GEL/86/3
IEC 61300-2-5:2009
(Edition 3) Tests. Torsion 40.32 members, 42.00 non-members
GEL/86/2
IEC 61557:
Electrical safety in low voltage distribution systems up to 1000 V A.C. and 1500 V D.C. Equipment for testing, measuring or monitoring of protective measures
IEC 61300-3:
Examination and measurements
IEC 62059:
Electricity metering equipment. Dependability
IEC 61300-3-2:2009
(Edition 3) Polarization dependent loss in a single-mode fibre optic device 65.28 members, 68.00 non-members
GEL/86/2
IEC 61557-9:2009
(Edition 2) Equipment for insulation fault location in IT systems 91.20 members, 95.00 non-members
PEL/85
IEC 62059-31-1:
Accelerated reliability testing. Elevated temperature and humidity CORRIGENDUM 1:December 2008
to IEC 62059-31-1:2008
PEL/13
66
IEC 62137:
Surface mounting technology. Environmental and endurance test methods for surface mount solder joint
IEC/PAS PUBLICATIONS
IEC/PAS 62591:2009
ISO 863:2008
(Edition 2) Cement. Test methods. Pozzolanicity test for pozzolanic cements 57.60 members, 60.00 non-members
B/516/12
IEC 62137-1-4:2009
Cyclic bending test 52.80 members, 55.00 non-members
EPL/501
Industrial communication networks. Fieldbus specifications. WirelessHART communication network and communication profile 256.32 members, 267.00 non-members
AMT/7
ISO 1112:2009
(Edition 3) Horology. Functional and non-functional jewels 38.40 members, 40.00 non-members
STI/53
ISO 1628:
Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers
IEC 62271-110:2009
(Edition 2) Inductive load switching 100.80 members, 105.00 non-members
PEL/17/1
IEC/PAS 62601:2009
Industrial communication networks. Fieldbus specifications. WIA-PA communication network and communication profile 233.28 members, 243.00 non-members
AMT/7
ISO 1628-1:2009
(Edition 3) General principles 93.12 members, 97.00 non-members
PRI/21
IEC/TR 62296:2009
(Edition 2) Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements 213.12 members, 222.00 non-members
CH/62/1
ISO PUBLICATIONS
It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2)
ISO 1924:
Paper and board. Determination of tensile properties
ISO 1924-2:2008
(Edition 3) Constant rate of elongation method (20 mm/min) 65.28 members, 68.00 non-members
PAI/11
IEC 80601:
Medical electrical equipment
IEC 80601-2-30:2009
Particular requirements for the basic safety and essential performance of automated type noninvasive sphygmomanometers 174.72 members, 182.00 non-members
CH/62/4
ISO 148:
Metallic materials. Charpy pendulum impact test
ISO 2081:2008
(Edition 3)
ISO 148-2:2008
(Edition 2) Verification of testing machines 118.08 members, 123.00 non-members
ISE/NFE/4/4
Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel 74.88 members, 78.00 non-members
STI/33
ISO 2834:
Graphic technology. Laboratory preparation of test prints
ISO 730:2009
Agricultural wheeled tractors. Rear-mounted three-point linkage. Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 74.88 members, 78.00 non-members
AGE/6
ISO 2834-3:2008
Screen printing inks 50.88 members, 53.00 non-members
PAI/43
67
ISO 5821:2009
(Edition 2) Resistance welding. Spot welding electrode caps 57.60 members, 60.00 non-members
WEE/29
ISO 7590:2009
(Edition 5) Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness 50.88 members, 53.00 non-members
PRI/67
ISO 3822-1:
Method of measurement AMENDMENT 1:December 2008
to ISO 3822-1:1999
14.40 members, 15.00 non-members
EH/1/6
ISO 5832:
Implants for surgery Metallic materials
ISO 4040:2009
(Edition 5) Road vehicles. Location of hand controls, indicators and tell-tales in motor vehicles 57.60 members, 60.00 non-members
AUE/12
to ISO 5832-12:2007
CH/150/1
ISO/IEC 7816-15:
Cryptographic information application AMENDMENT 2:December 2008
to ISO/IEC 7816-15:2004
14.40 members, 15.00 non-members
IST/17
ISO 6020:
Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 4141:
Road vehicles. Multi-core connecting cables
ISO 6020-2:
Compact series CORRIGENDUM 1:October 2008
ISO 7919:
Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts
ISO 4141-4:2009
(Edition 2) Test methods and requirements for coiled cable assemblies 57.60 members, 60.00 non-members
AUE/16
to ISO 6020-2:2006
MCE/18/-/3
ISO 7919-3:2009
(Edition 2) Coupled industrial machines 50.88 members, 53.00 non-members
GME/21/5
ISO 6550:
Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing
ISO 4642:
Rubber and plastics hoses, non-collapsible, for fire-fighting service
ISO 6550-3:2009
(Edition 3) M10 glow-plugs 57.60 members, 60.00 non-members
MCE/9
ISO 8375:2009
(Edition 2) Timber structures. Glued laminated timber. Test methods for determination of physical and mechanical properties 102.72 members, 107.00 non-members
B/518
ISO 4642-1:2009
Semi-rigid hoses for fixed systems 79.68 members, 83.00 non-members
PRI/66/-/1
ISO/IEC 9594-2:
The Directory. Models CORRIGENDUM 2:December 2008
ISO 5398:
Leather. Chemical determination of chromic oxide content
ISO 7547:
Ships and marine technology. Air-conditioning and ventilation of accommodation spaces. Design conditions and basis of calculations CORRIGENDUM 1:September 2008
to ISO/IEC 9594-2:2001
IST/6
ISO 5398-2:2009
Quantification by colorimetric determination 45.12 members, 47.00 non-members
TCI/69
to ISO 7547:2002
SME/32/-/3
ISO/IEC 9834:
Information technology. Open Systems Interconnection. Procedures for the operation of OSI Registration Authorities
ISO 5630:
Paper and board. Accelerated ageing
ISO 7578:2008
(Edition 4) Road vehicles. Sheath-type glowplugs. General requirements and test methods 45.12 members, 47.00 non-members
MCE/9
ISO/IEC 9834-9:2008
Registration of object identifier arcs for applications and services using tag-based identification 45.12 members, 47.00 non-members
IST/6
ISO 5630-5:2008
Exposure to elevated temperature at 100C 50.88 members, 53.00 non-members
PAI/11
68
ISO/TS 10891:2009
Freight containers. Radio frequency identification (RFID). Licence plate tag 74.88 members, 78.00 non-members
TW/1
ISO/TR 12885:2008
Nanotechnologies Health and safety practices in occupational settings relevant to nanotechnologies 98.00 members, 163.00 non-members
NTI/1
ISO 9927-1:2009
(Edition 2) General 50.88 members, 53.00 non-members
MHE/3/11
ISO 11001:
Agricultural wheeled tractors and implements. Three-point hitch couplers
ISO 13012:
Rolling bearings Accessories for sleeve type linear ball bearings
ISO 10295:
Fire tests for building elements and components. Fire testing of service installations
ISO 11001-3:2009
(Edition 2) Link coupler 38.40 members, 40.00 non-members
ISO 13012-1:2009
Boundary dimensions and tolerances for series 1 and 3 84.48 members, 88.00 non-members
MCE/7
ISO 10295-2:2009
Linear joint (gap) seals 97.92 members, 102.00 non-members
FSH/22
AGE/6
ISO 10303:
Industrial automation systems and integration. Product data representation and exchange
ISO 11155-2:2009
Test for gaseous filtration 79.68 members, 83.00 non-members
MCE/21/2
ISO 13606:
Health informatics. Electronic health record communication
ISO 10303-215:
Application protocol. Ship arrangement CORRIGENDUM 1:December 2008
to ISO 10303-215:2004
AMT/4
ISO/TR 10771:
Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes
ISO/IEC 14165:
Information technology. Fibre channel
ISO/TR 10771-2:2008
Rating methods 118.08 members, 123.00 non-members
MCE/18/-/8
ISO 11413:2008
(Edition 2) Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting 57.60 members, 60.00 non-members
PRI/88/4
ISO/IEC 14165-116:
10 Gigabit Fibre Channel (10GFC) AMENDMENT 1:January 2009
to ISO/IEC 14165-116:2005
33.60 members, 35.00 non-members
IST/6
ISO 10816:
Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts
ISO 10816-3:2009
(Edition 2) Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ 65.28 members, 68.00 non-members
GME/21/5
(Edition 2) Plastics pipes and fittings Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion 50.88 members, 53.00 non-members
PRI/88/4
ISO/IEC 14496:
Information technology. Coding of audio-visual objects
ISO 10816-7:2009
Rotodynamic pumps for industrial applications, including measurements on rotating shafts 79.68 members, 83.00 non-members
GME/21/5
to ISO/IEC 14496-3:2005
IST/37
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
70
ISO 15592:
Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis
ISO 16061:2008
(Edition 2) Instrumentation for use in association with nonactive surgical implants. General requirements 84.48 members, 88.00 non-members
CH/150
to ISO/IEC 14496-3:2005
IST/37
ISO 15592-3:2008
(Edition 2) Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter 108.48 members, 113.00 non-members
AW/40
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
ISO 16918:
Steel and iron. Determination of nine elements by the inductively coupled plasma mass spectroscopic method
ISO/IEC TR 14496-9:2009
(Edition 3) Reference hardware description 292.80 members, 305.00 non-members
IST/37
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
ISO 16918-1:2009
Determination of tin, antimony, cerium, lead and bismuth 102.72 members, 107.00 non-members
ISE/18
to ISO/IEC 14496-12:2008
IST/37
ISO 15616-4:2008
Machines with 2-D moving optics 50.88 members, 53.00 non-members
WEE/-/1
ISO 17484:
Plastics piping systems. Multilayer pipe systems for indoor gas installations
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
ISO 17484-2:2009
Code of practice 50.88 members, 53.00 non-members
PRI/88/2
ISO/IEC 14496-16:
Animation Framework eXtension (AFX) AMENDMENT 1:CORRIGENDUM 2:December 2008
ISO 15633:2009
Iron ores. Determination of nickel. Flame atomic absorption spectrometric method 70.08 members, 73.00 non-members
ISE/58
to ISO/IEC 14496-16:2006
IST/37
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
ISO 17572:
Intelligent transport systems (ITS). Location referencing for geographic databases
Metallic and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron 70.08 members, 73.00 non-members
STI/33
ISO 17572-1:2008
General requirements and conceptual model 122.88 members, 128.00 non-members
EPL/278
ISO 17572-2:2008
Pre-coded location references (pre-coded profile) 113.28 members, 118.00 non-members
EPL/278
ISO 15086-3:2008
Measurement of hydraulic impedance 97.92 members, 102.00 non-members
MCE/18/-/8
ISO 16000:
Indoor air
ISO 17572-3:2008
Dynamic location references (dynamic profile) 166.08 members, 173.00 non-members
EPL/278
ISO/TS 17665:
Sterilization of health care products. Moist heat
ISO/IEC 15444-12:
ISO base media file format CORRIGENDUM 1:December 2008
ISO 16000-17:2008
Detection and enumeration of moulds. Culturebased method 93.12 members, 97.00 non-members
EH/2/3
ISO/TS 17665-2:2009
Guidance on the application of ISO 17665-1 131.52 members, 137.00 non-members
CH/198
to ISO/IEC 15444-12:2008
IST/37
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
72
ISO/IEC 19796:
Information technology. Learning, education and training. Quality management, assurance and metrics
ISO 20474-9:2008
Requirements for pipelayers 50.88 members, 53.00 non-members
B/513/1
ISO 21487:
Small craft. Permanently installed petrol and diesel fuel tanks CORRIGENDUM 1:December 2008
to ISO 21487:2006
GME/33
ISO/IEC 19796-3:2009
Reference methods and metrics 118.08 members, 123.00 non-members
IST/43
ISO 20474-10:2008
Requirements for trenchers 50.88 members, 53.00 non-members
B/513/1
ISO 22007:
Plastics. Determination of thermal conductivity and thermal diffusivity
ISO 20474:
Earth-moving machinery. Safety
ISO 20474-11:2008
Requirements for earth and landfill compactors 45.12 members, 47.00 non-members
ISO 22007-2:2008
Transient plane heat source (hot disc) method 79.68 members, 83.00 non-members
PRI/21
ISO 20474-1:2008
General requirements 93.12 members, 97.00 non-members
B/513/1
B/513/1
ISO 20474-12:2008
Requirements for cable excavators 74.88 members, 78.00 non-members
ISO 20474-2:2008
Requirements for tractor-dozers 45.12 members, 47.00 non-members
B/513/1
ISO 22007-3:2008
Temperature wave analysis method 74.88 members, 78.00 non-members
PRI/21
B/513/1
ISO 20474-13:2008
Requirements for rollers 93.12 members, 97.00 non-members
B/513/1
ISO 20474-3:2008
Requirements for loaders 57.60 members, 60.00 non-members
B/513/1
ISO 22007-4:2008
Laser flash method 65.28 members, 68.00 non-members
PRI/21
ISO/TS 20474-14:2008
Information on national and regional provisions 79.68 members, 83.00 non-members
B/513/1
ISO 20474-4:2008
Requirements for backhoe loaders 70.08 members, 73.00 non-members
B/513/1
ISO 22036:2008
Soil quality. Determination of trace elements in extracts of soil by inductively coupled plasma. atomic emission spectrometry (ICP-AES) 108.48 members, 113.00 non-members
EH/4
ISO 20666:2008
Water quality. Determination of the chronic toxicity to Brachionus calyciflorus in 48 h 74.88 members, 78.00 non-members
EH/3/5
ISO 20474-5:2008
Requirements for hydraulic excavators 65.28 members, 68.00 non-members
B/513/1
Space systems. Non-flight items in flight hardware. Identification and control 57.60 members, 60.00 non-members
ACE/68/-/3
ISO 20474-6:2008
Requirements for dumpers 57.60 members, 60.00 non-members
B/513/1
ISO 21307:2009
Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems 70.08 members, 73.00 non-members
PRI/88/2
ISO 22201:2009
Lifts (elevators). Design and Development of programmable electronic systems in safetyrelated application for lifts (PESSRAL) 122.88 members, 128.00 non-members
MHE/4
ISO 20474-7:2008
Requirements for scrapers 45.12 members, 47.00 non-members
B/513/1
ISO 22837:2009
Vehicle probe data for wide area communications 137.28 members, 143.00 non-members
EPL/278
Clinical dosimetry. Beta radiation sources for brachytherapy 166.08 members, 173.00 non-members
NCE/2
73
ISO/IEC 24747:2009
Information technology. Programming languages, their environments and system software interfaces. Extensions to the C Library to support mathematical special functions 84.48 members, 88.00 non-members
IST/5
ISO 26868:2009
Space data and information transfer systems. Image data compression 137.28 members, 143.00 non-members
ACE/68/-/7
ISO 22900-2:2009
Diagnostic protocol data unit application programming interface (D-PDUAPI) 167.00 members, 278.00 non-members
AUE/16
ISO 22951:2009
Data dictionary and message sets for preemption and prioritization signal systems for emergency and public transport vehicles (PRESTO) 131.52 members, 137.00 non-members
EPL/278
ISO/IEC 23000:
Information technology. Multimedia application format (MPEG-A)
Designation system and basis for specifications 65.28 members, 68.00 non-members
PRI/82
ISO/TS 27893:2009
Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge 74.88 members, 78.00 non-members
MCE/8/-/4
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
ISO 25137-2:2009
Preparation of test specimens and determination of properties 45.12 members, 47.00 non-members
PRI/82
ISO 23814:2009
Cranes. Competency requirements for crane inspectors 50.88 members, 53.00 non-members
MHE/3/11
ISO 28219:2009
Packaging. Labelling and direct product marking with linear bar code and twodimensional symbols 131.52 members, 137.00 non-members
PKW/0
ISO 24033:2009
(Edition 2) Polyethylene of raised-temperature resistance (PE-RT). Pipes. Effect of time and temperature on the expected strength 50.88 members, 53.00 non-members
PRI/88/4
ISO/IEC 29121:2009
Information technology. Digitally recorded media for information interchange and storage. Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks 74.88 members, 78.00 non-members
ICT/-/1
ISO 26362:2009
Access panels in market, opinion and social research. Vocabulary and service requirements 70.08 members, 73.00 non-members
SVS/3
ISO 24393:2008
Rolling bearings. Linear motion rolling bearings. Vocabulary 113.28 members, 118.00 non-members
MCE/7
Systems to manage terminology, knowledge and content. TermBase eXchange (TBX) 166.08 members, 173.00 non-members
TS/1
ISO/IEC TR 24732:2009
Information technology. Programming languages, their environments and system software interfaces. Extension for the programming language C to support decimalfloating-point arithmetic 97.92 members, 102.00 non-members
IST/5
Terms and definitions used in connection with reference materials AMENDMENT 1:November 2008
74